简易的ARPG脚本。。。 - Project1

#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================
#
# 使用方法：
#
# ★、对角色显示伤害，如下3步：
#
# 1、设置伤害内容：$game_player.damage = 数值
# 注意：如果数值是负数，就变成补血的颜色了。
#
# 2、设置是否会心一击：$game_player.critical = true/false
# 如果不是会心一击，就不用这一步了
#
# 3、释放伤害：$game_player.damage_pop = true
#
#
# ★、对普通NPC和事件进行伤害，类似的3步：
#
# 1、设置伤害内容：$game_map.events[事件编号].damage = 数值
#
# 2、设置是否会心一击：$game_map.events[事件编号].critical = true/false
#
# 3、释放伤害：$game_map.events[事件编号].damage_pop = true
#
# 注意，事件编号是事件的ID号，如果目标是“本事件”，那么在事件编号输入@event_id
#
#------------------------------------------------------------------------------
# 预祝有人能早日做出华丽的ARPG来，别忘了到网站发布哦～
#------------------------------------------------------------------------------
class Sprite_Character < RPG::Sprite
alias carol3_66RPG_damage_pop_update update
def update
carol3_66RPG_damage_pop_update
if @character.damage_pop
damage(@character.damage, @character.critical)
@character.damage = nil
@character.critical = false
@character.damage_pop = false
end
end
end
class Game_Character
attr_accessor :damage_pop
attr_accessor :damage
attr_accessor :critical
alias carol3_66RPG_damage_pop_initialize initialize
def initialize
@damage_pop = false
@damage = 0
@critical = false
carol3_66RPG_damage_pop_initialize
end
end
#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================
#==========================================================================
# 以下是全键盘按键列表
#--------------------------------------------------------------------------
$Rmouse_BUTTON_L = 0x01 # left mouse button
$Rmouse_BUTTON_R = 0x02 # right mouse button
$Rmouse_BUTTON_M = 0x04 # middle mouse button
$Rmouse_BUTTON_4 = 0x05 # 4th mouse button
$Rmouse_BUTTON_5 = 0x06 # 5th mouse button
#--------------------------------------------------------------------------
$R_Key_BACK = 0x08 # BACKSPACE key
$R_Key_TAB = 0x09 # TAB key
$R_Key_RETURN = 0x0D # ENTER key
$R_Key_SHIFT = 0x10 # SHIFT key
$R_Key_CTLR = 0x11 # CTLR key
$R_Key_ALT = 0x12 # ALT key
$R_Key_PAUSE = 0x13 # PAUSE key
$R_Key_CAPITAL = 0x14 # CAPS LOCK key
$R_Key_ESCAPE = 0x1B # ESC key
$R_Key_SPACE = 0x20 # SPACEBAR
$R_Key_PRIOR = 0x21 # PAGE UP key
$R_Key_NEXT = 0x22 # PAGE DOWN key
$R_Key_END = 0x23 # END key
$R_Key_HOME = 0x24 # HOME key
$R_Key_LEFT = 0x25 # LEFT ARROW key
$R_Key_UP = 0x26 # UP ARROW key
$R_Key_RIGHT = 0x27 # RIGHT ARROW key
$R_Key_DOWN = 0x28 # DOWN ARROW key
$R_Key_SELECT = 0x29 # SELECT key
$R_Key_PRINT = 0x2A # PRINT key
$R_Key_SNAPSHOT = 0x2C # PRINT SCREEN key
$R_Key_INSERT = 0x2D # INS key
$R_Key_DELETE = 0x2E # DEL key
#--------------------------------------------------------------------------
$R_Key_0 = 0x30 # 0 key
$R_Key_1 = 0x31 # 1 key
$R_Key_2 = 0x32 # 2 key
$R_Key_3 = 0x33 # 3 key
$R_Key_4 = 0x34 # 4 key
$R_Key_5 = 0x35 # 5 key
$R_Key_6 = 0x36 # 6 key
$R_Key_7 = 0x37 # 7 key
$R_Key_8 = 0x38 # 8 key
$R_Key_9 = 0x39 # 9 key
#--------------------------------------------------------------------------
$R_Key_A = 0x41 # A key
$R_Key_B = 0x42 # B key
$R_Key_C = 0x43 # C key
$R_Key_D = 0x44 # D key
$R_Key_E = 0x45 # E key
$R_Key_F = 0x46 # F key
$R_Key_G = 0x47 # G key
$R_Key_H = 0x48 # H key
$R_Key_I = 0x49 # I key
$R_Key_J = 0x4A # J key
$R_Key_K = 0x4B # K key
$R_Key_L = 0x4C # L key
$R_Key_M = 0x4D # M key
$R_Key_N = 0x4E # N key
$R_Key_O = 0x4F # O key
$R_Key_P = 0x50 # P key
$R_Key_Q = 0x51 # Q key
$R_Key_R = 0x52 # R key
$R_Key_S = 0x53 # S key
$R_Key_T = 0x54 # T key
$R_Key_U = 0x55 # U key
$R_Key_V = 0x56 # V key
$R_Key_W = 0x57 # W key
$R_Key_X = 0x58 # X key
$R_Key_Y = 0x59 # Y key
$R_Key_Z = 0x5A # Z key
#--------------------------------------------------------------------------
$R_Key_LWIN = 0x5B # Left Windows key (Microsoft Natural keyboard)
$R_Key_RWIN = 0x5C # Right Windows key (Natural keyboard)
$R_Key_APPS = 0x5D # Applications key (Natural keyboard)
#--------------------------------------------------------------------------
$R_Key_NUMPAD0 = 0x60 # Numeric keypad 0 key
$R_Key_NUMPAD1 = 0x61 # Numeric keypad 1 key
$R_Key_NUMPAD2 = 0x62 # Numeric keypad 2 key
$R_Key_NUMPAD3 = 0x63 # Numeric keypad 3 key
$R_Key_NUMPAD4 = 0x64 # Numeric keypad 4 key
$R_Key_NUMPAD5 = 0x65 # Numeric keypad 5 key
$R_Key_NUMPAD6 = 0x66 # Numeric keypad 6 key
$R_Key_NUMPAD7 = 0x67 # Numeric keypad 7 key
$R_Key_NUMPAD8 = 0x68 # Numeric keypad 8 key
$R_Key_NUMPAD9 = 0x69 # Numeric keypad 9 key
$R_Key_MULTIPLY = 0x6A # Multiply key (*)
$R_Key_ADD = 0x6B # Add key (+)
$R_Key_SEPARATOR = 0x6C # Separator key
$R_Key_SUBTRACT = 0x6D # Subtract key (-)
$R_Key_DECIMAL = 0x6E # Decimal key
$R_Key_DIVIDE = 0x6F # Divide key (/)
#--------------------------------------------------------------------------
$R_Key_F1 = 0x70 # F1 key
$R_Key_F2 = 0x71 # F2 key
$R_Key_F3 = 0x72 # F3 key
$R_Key_F4 = 0x73 # F4 key
$R_Key_F5 = 0x74 # F5 key
$R_Key_F6 = 0x75 # F6 key
$R_Key_F7 = 0x76 # F7 key
$R_Key_F8 = 0x77 # F8 key
$R_Key_F9 = 0x78 # F9 key
$R_Key_F10 = 0x79 # F10 key
$R_Key_F11 = 0x7A # F11 key
$R_Key_F12 = 0x7B # F12 key
#--------------------------------------------------------------------------
$R_Key_NUMLOCK = 0x90 # NUM LOCK key
$R_Key_SCROLL = 0x91 # SCROLL LOCK key
#--------------------------------------------------------------------------
$R_Key_LSHIFT = 0xA0 # Left SHIFT key
$R_Key_RSHIFT = 0xA1 # Right SHIFT key
$R_Key_LCONTROL = 0xA2 # Left CONTROL key
$R_Key_RCONTROL = 0xA3 # Right CONTROL key
$R_Key_L_ALT = 0xA4 # Left ALT key
$R_Key_R_ALT = 0xA5 # Right ALT key
#--------------------------------------------------------------------------
$R_Key_SEP = 0xBC # , key
$R_Key_DASH = 0xBD # - key
$R_Key_DOTT = 0xBE # . Key
module Kboard
module_function
@R_Key_Hash = {}
@R_Key_Repeat = {}
GetKeyState = Win32API.new("user32","GetAsyncKeyState",['I'],'I')
def press?(rkey)
return GetKeyState.call(rkey) != 0
end
def repeat?(rkey)
result = GetKeyState.call(rkey)
if result != 0
if @R_Key_Repeat[rkey].nil?
@R_Key_Repeat[rkey] = 0
return true
end
@R_Key_Repeat[rkey] += 1
else
@R_Key_Repeat[rkey] = nil
@R_Key_Hash[rkey] = 0
end
if !@R_Key_Repeat[rkey].nil? and @R_Key_Repeat[rkey] > 4 # 4乃准确数字
@R_Key_Repeat[rkey] = 0
return true
else
return false
end
end
def trigger?(rkey)
result = GetKeyState.call(rkey)
if @R_Key_Hash[rkey] == 1 and result != 0
return false
end
if result != 0
@R_Key_Hash[rkey] = 1
return true
else
@R_Key_Hash[rkey] = 0
return false
end
end
end# ▼▲▼ XRXS34. パノラマスクロール ▼▲▼
# by ぷのくー
#——————————————————————————————————————
# 这是一个非常简单的脚本，只要自定义自动滚动的地图编号和绝对不滚动的地图编号
# 即可实现对远景的操作。
#——————————————————————————————————————
#==============================================================================
# 初始化的一些常量
#==============================================================================
class Game_Map
# 远景横向飘移速度速度
PANORAMA_SX = -10
# 远景纵向飘移速度速度
PANORAMA_SY = 0
# 自动滚动远景的地图编号(编号为1、4、7、5的地图远景会自动移动)
AUTO_SCROLL_PANORAMA_IDS = [1,2,3,4,5,26]
end
class Spriteset_Map
# 锁定远景的地图编号(编号为2、8、10的地图远景会锁定)
SCROLL_FREEZE_PANORAMA_IDS = []
#——说明：如果自动滚动和锁定都包括了某张地图，则该地图不滚动。
#——如果自动滚动和锁定都没有包括某图，则还是会使用默认效果。
end
#==============================================================================
# ■ Game_Map
#==============================================================================
class Game_Map
attr_accessor :panorama_sx
attr_accessor :panorama_sy
attr_reader :panorama_ox
attr_reader :panorama_oy
def setup(map_id)
@map_id = map_id
@map = load_data(sprintf("Data/Map%03d.rxdata", @map_id))
tileset = $data_tilesets[@map.tileset_id]
@tileset_name = tileset.tileset_name
@autotile_names = tileset.autotile_names
@panorama_name = tileset.panorama_name
@panorama_hue = tileset.panorama_hue
@fog_name = tileset.fog_name
@fog_hue = tileset.fog_hue
@fog_opacity = tileset.fog_opacity
@fog_blend_type = tileset.fog_blend_type
@fog_zoom = tileset.fog_zoom
@fog_sx = tileset.fog_sx
@fog_sy = tileset.fog_sy
# ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
if AUTO_SCROLL_PANORAMA_IDS.include?(map_id)
@panorama_sx = PANORAMA_SX
@panorama_sy = PANORAMA_SY
else
@panorama_sx = 0
@panorama_sy = 0
end
# ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
@battleback_name = tileset.battleback_name
@passages = tileset.passages
@priorities = tileset.priorities
@terrain_tags = tileset.terrain_tags
@display_x = 0
@display_y = 0
@need_refresh = false
@events = {}
for i in @map.events.keys
@events[i] = Game_Event.new(@map_id, @map.events[i])
end
@common_events = {}
for i in 1...$data_common_events.size
@common_events[i] = Game_CommonEvent.new(i)
end
@fog_ox = 0
@fog_oy = 0
@panorama_ox = 0
@panorama_oy = 0
@fog_tone = Tone.new(0, 0, 0, 0)
@fog_tone_target = Tone.new(0, 0, 0, 0)
@fog_tone_duration = 0
@fog_opacity_duration = 0
@fog_opacity_target = 0
@scroll_direction = 2
@scroll_rest = 0
@scroll_speed = 4
end
def update
if $game_map.need_refresh
refresh
end
if @scroll_rest > 0
distance = 2 ** @scroll_speed
case @scroll_direction
when 2 # 下
scroll_down(distance)
when 4 # 左
scroll_left(distance)
when 6 # 右
scroll_right(distance)
when 8 # 上
scroll_up(distance)
end
@scroll_rest -= distance
end
for event in @events.values
event.update
end
for common_event in @common_events.values
common_event.update
end
@fog_ox -= @fog_sx / 8.0
@fog_oy -= @fog_sy / 8.0
# ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
@panorama_ox -= @panorama_sx / 8.0
@panorama_oy -= @panorama_sy / 8.0
# ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
if @fog_tone_duration >= 1
d = @fog_tone_duration
target = @fog_tone_target
@fog_tone.red = (@fog_tone.red * (d - 1) + target.red) / d
@fog_tone.green = (@fog_tone.green * (d - 1) + target.green) / d
@fog_tone.blue = (@fog_tone.blue * (d - 1) + target.blue) / d
@fog_tone.gray = (@fog_tone.gray * (d - 1) + target.gray) / d
@fog_tone_duration -= 1
end
if @fog_opacity_duration >= 1
d = @fog_opacity_duration
@fog_opacity = (@fog_opacity * (d - 1) + @fog_opacity_target) / d
@fog_opacity_duration -= 1
end
end
end
#==============================================================================
# ■ Spriteset_Map
#==============================================================================
class Spriteset_Map
def update
if @panorama_name != $game_map.panorama_name or
@panorama_hue != $game_map.panorama_hue
@panorama_name = $game_map.panorama_name
@panorama_hue = $game_map.panorama_hue
if @panorama.bitmap != nil
@panorama.bitmap.dispose
@panorama.bitmap = nil
end
if @panorama_name != ""
@panorama.bitmap = RPG::Cache.panorama(@panorama_name, @panorama_hue)
end
Graphics.frame_reset
end
if @fog_name != $game_map.fog_name or @fog_hue != $game_map.fog_hue
@fog_name = $game_map.fog_name
@fog_hue = $game_map.fog_hue
if @fog.bitmap != nil
@fog.bitmap.dispose
@fog.bitmap = nil
end
if @fog_name != ""
@fog.bitmap = RPG::Cache.fog(@fog_name, @fog_hue)
end
Graphics.frame_reset
end
@tilemap.ox = $game_map.display_x / 4
@tilemap.oy = $game_map.display_y / 4
@tilemap.update
# ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
if SCROLL_FREEZE_PANORAMA_IDS.include?($game_map.map_id)
@panorama.ox = 0
@panorama.oy = 0
else
@panorama.ox = $game_map.display_x / 8 +$game_map.panorama_ox
@panorama.oy = $game_map.display_y / 8 +$game_map.panorama_oy
end
# ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
@fog.zoom_x = $game_map.fog_zoom / 100.0
@fog.zoom_y = $game_map.fog_zoom / 100.0
@fog.opacity = $game_map.fog_opacity
@fog.blend_type = $game_map.fog_blend_type
@fog.ox = $game_map.display_x / 4 + $game_map.fog_ox
@fog.oy = $game_map.display_y / 4 + $game_map.fog_oy
@fog.tone = $game_map.fog_tone
for sprite in @character_sprites
sprite.update
end
@weather.type = $game_screen.weather_type
@weather.max = $game_screen.weather_max
@weather.ox = $game_map.display_x / 4
@weather.oy = $game_map.display_y / 4
@weather.update
for sprite in @picture_sprites
sprite.update
end
@timer_sprite.update
@viewport1.tone = $game_screen.tone
@viewport1.ox = $game_screen.shake
@viewport3.color = $game_screen.flash_color
@viewport1.update
@viewport3.update
end
end

复制代码

=begin
==============================================================================
彩虹神剑（伤害分段显示）显示总伤害版 v1.0d
==============================================================================
彩虹神剑－柳柳
6-20-2006 v1.0 －叶子
在彩虹神剑的基础上增加了显示总伤害的功能，而且总伤害的数字是弹出伤害时逐渐增加的
v1.0a －叶子
修正了显示伤害和实际伤害有差别的问题
修正了miss的情况下显示miss混乱的问题
修正了对己方技能重复显示伤害的问题
未修正播放目标动画第一帧时目标有时无端跳动的BUG
v1.0b －叶子
修改了总伤害数字的位置和z坐标
未修正播放目标动画第一帧时目标有时无端跳动的BUG
v1.0c －柳柳
? ? ?
v1.0d －柳柳
1.0d最终解决了那个闪光问题，还有最末帧伤害多次的算法
7-24-2006 v1.0e －叶子
修正全屏幕闪烁弹出伤害错误的问题
修正连续伤害不会弹出伤害的问题
仍然未修正播放目标动画第一帧时目标有时无端跳动的BUG
我鼓起很大勇气才敢动偶像们的脚本的，不知道会不会出问题啊...... -cftx
修正了总伤害显示
增加了伤害美化和HIT数显示
修正了两次音效
==============================================================================
=end
# 核心的说明：
# damage_pop 不再附带damage()的功能，这个放到animation里面去了
module RPG
#--------------------------------------------------------------------------
# ● 常量设定
#--------------------------------------------------------------------------
# 是否显示总伤害
SHOW_TOTAL_DAMAGE = false
# 角色受攻击时是否跳一下
BATTLER_JUMP = false
# 连续伤害的动画ID
SLIP_DAMAGE_ANIMATION_ID = 105
class Sprite < ::Sprite
#==========================================
# 修改说明：
# @flash_shake用来制作挨打时候跳跃
# @_damage 用来记录每次打击之后弹出数字
# @_total_damage 记录总伤害
# @_total_damage_duration 总伤害持续帧
#==========================================
#alias 66RPG_rainbow_initialize : initialize
def initialize(viewport = nil)
#66RPG_rainbow_initialize(viewport)
super(viewport)
@_whiten_duration = 0
@_appear_duration = 0
@_escape_duration = 0
@_collapse_duration = 0
@_damage_duration = 0
@_animation_duration = 0
@_blink = false
# 挨打时候跳跃
@flash_shake = 0
# 伤害记录数组
@_damage = []
# 总伤害数字
@_total_damage = 0
# 总伤害持续帧
@_total_damage_duration = 0
#记录已经发生的伤害的变量★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
@p_dam=0
@hits=0
end
#美化的伤害处理★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
def damage(value, critical)
# 释放伤害,效果是伤害数字快速消失,觉得不如不消失好看......
#dispose_damage
#清除hit数
dispose_hit
# 如果伤害值是数值
if value.is_a?(Numeric)
# 绝对值转为字符串
damage_string = value.abs.to_s
else
# 转为字符串
damage_string = value.to_s
end
# 初始化位图
bitmap = Bitmap.new(162, 64)
bitmap.font.name = ["黑体","华文行楷", "宋体"]
bitmap.font.size = 32
# 伤害值是数值的情况下
if value.is_a?(Numeric)
# 分割伤害值字符串
damage_array = damage_string.scan(/./)
damage_x = 81 - damage_string.size * 9
# 伤害值为负的情况下
if value < 0
# 调用回复数字表
rect_y = 32
else
# 调用伤害数字表
rect_y = 0
end
# 循环伤害值字符串
for char in damage_array
number = char.to_i
# 显示伤害数字
bitmap.blt(damage_x, 32, RPG::Cache.picture("Damage"),
Rect.new(number * 18, rect_y, 18, 32))
# 后移一位
damage_x += 18
end
# 伤害值不是数值的情况
else
# 如果伤害值不是 Miss
unless value == "Miss"
# 系统默认描画字符串
bitmap.font.color.set(0, 0, 0)
bitmap.draw_text(-1, 27, 162, 36, damage_string, 1)
bitmap.draw_text(+1, 27, 162, 36, damage_string, 1)
bitmap.draw_text(-1, 29, 162, 36, damage_string, 1)
bitmap.draw_text(+1, 29, 162, 36, damage_string, 1)
bitmap.font.color.set(255, 255, 255)
bitmap.draw_text(0, 28, 162, 36, damage_string, 1)
# Miss 的情况下
else
# 显示未击中图画
bitmap.blt(36, 28, RPG::Cache.picture("Damage"), Rect.new(90, 64, 90, 32))
end
end
# 会心一击标志打开的情况
if critical
# 显示会心一击图画
bitmap.blt(36, 0, RPG::Cache.picture("Damage"), Rect.new(0, 64, 90, 32))
end
# 伤害值定位
@_damage_sprite = ::Sprite.new(self.viewport)
@_damage_sprite.bitmap = bitmap
@_damage_sprite.ox = 81
@_damage_sprite.oy = 20
@_damage_sprite.x = self.x
@_damage_sprite.y = self.y - self.oy / 2
@_damage_sprite.z = 3000
@_damage_duration = 40
@_damage.push([@_damage_sprite,@_damage_duration-10,0, rand(30) - 15, rand(3)])
make_total_damage(value)
end
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
# hit数的美化描绘
def hit
@_hits_sprite.bitmap.dispose if @_hits_sprite != nil
# 如果伤害值是数值
# 转为字符串
value=@hits
hits_string = value.to_s
# 初始化位图
bitmap = Bitmap.new(320, 64)
bitmap.font.name = "Arial Black"
bitmap.font.size = 32
# 分割伤害值字符串
hits_array = hits_string.scan(/./)
hits_x = 81 - hits_string.size * 18.1
rect_y = 0
# 循环伤害值字符串
for char in hits_array
number = char.to_i
# 显示伤害数字
bitmap.blt(hits_x, 0, RPG::Cache.picture("Number"),
Rect.new(number * 36.2, rect_y, 36.2, 50))
# 后移一位
hits_x += 36.2
end
bitmap.blt(hits_x, 0, RPG::Cache.picture("HITS"),
Rect.new(0, -21, 90, 50))
# 伤害值定位
@_hits_sprite = ::Sprite.new(self.viewport)
@_hits_sprite.bitmap = bitmap
@_hits_sprite.ox = 81
@_hits_sprite.oy = 20
@_hits_sprite.x = 500
@_hits_sprite.y = 100
@_hits_sprite.z = 3000
@_hits_duration = 40
end
#--------------------------------------------------------------------------
# ● 总伤害处理
#--------------------------------------------------------------------------
def make_total_damage(value)
if value.is_a?(Numeric) and SHOW_TOTAL_DAMAGE
@_total_damage += value
# 绝对值转为字符串
damage_string = @_total_damage.abs.to_s
else
return
end
# 初始化位图
bitmap = Bitmap.new(300, 150)
bitmap.font.name = "Arial Black"
bitmap.font.size = 32
# 伤害值是数值的情况下
if value.is_a?(Numeric)
# 分割伤害值字符串
damage_array = damage_string.scan(/./)
damage_x = 40 - damage_string.size * 9
# 伤害值为负的情况下
if value < 0
# 调用回复数字表
name="Number3"
else
# 调用伤害数字表
name="Number2"
end
# 循环伤害值字符串
for char in damage_array
number = char.to_i
# 显示伤害数字
bitmap.blt(damage_x, 0, RPG::Cache.picture(name),
Rect.new(number * 36.2, 0, 36.2, 50))
# 后移一位
damage_x += 36.2
end
end
# if value.is_a?(Numeric) and SHOW_TOTAL_DAMAGE
# @_total_damage += value
# else
# return
# end
# bitmap = Bitmap.new(300, 150)
# bitmap.font.name = "Arial Black"
# bitmap.font.size = 40
# bitmap.font.color.set(0, 0, 0)
# bitmap.draw_text(+2, 12+2, 160, 40, @_total_damage.abs.to_s, 1)
# if @_total_damage < 0
# bitmap.font.color.set(80, 255, 00)
# else
# bitmap.font.color.set(255, 140, 0)
# end
# bitmap.draw_text(0, 12, 160, 40, @_total_damage.abs.to_s, 1)
# bitmap.font.color.set(55, 55,255)
if @_total_damage_sprite.nil?
@_total_damage_sprite = ::Sprite.new(self.viewport)
@_total_damage_sprite.ox = 80
@_total_damage_sprite.oy = 20
@_total_damage_sprite.z = 3000
end
@_total_damage_sprite.bitmap = bitmap
@_total_damage_sprite.zoom_x = 0.8
@_total_damage_sprite.zoom_y = 0.8
@_total_damage_sprite.x = self.x
@_total_damage_sprite.y = self.y - self.oy / 2 - 64
@_total_damage_sprite.z = 3001
@_total_damage_duration = 80
#hit数描绘
@hits+=1
if @_total_damage > 0
hit
end
end
def animation(animation, hit, battler_damage="", battler_critical=false)
dispose_animation
#=======================================
# 修改：记录伤害和critical
#=======================================
@battler_damage = battler_damage
@battler_critical = battler_critical
@_animation = animation
return if @_animation == nil
@_animation_hit = hit
@_animation_duration = @_animation.frame_max
animation_name = @_animation.animation_name
animation_hue = @_animation.animation_hue
bitmap = RPG::Cache.animation(animation_name, animation_hue)
#=======================================
# 修改：计算总闪光权限值
#=======================================
for timing in @_animation.timings
quanzhong = animation_process_timing(timing, @_animation_hit,true)
@all_quanzhong += quanzhong
# 记录最后一次闪光
@_last_frame = timing.frame if quanzhong != 0
end
if @@_reference_count.include?(bitmap)
@@_reference_count[bitmap] += 1
else
@@_reference_count[bitmap] = 1
end
#=======================================
# 修改：行动方动画不显示伤害
#=======================================
if $scene.is_a?(Scene_Battle)
if $scene.animation1_id == @battler.animation_id
@battler_damage = ""
end
end
@_animation_sprites = []
if @_animation.position != 3 or not @@_animations.include?(animation)
for i in 0..15
sprite = ::Sprite.new(self.viewport)
sprite.bitmap = bitmap
sprite.visible = false
@_animation_sprites.push(sprite)
end
unless @@_animations.include?(animation)
@@_animations.push(animation)
end
end
update_animation
end
#=======================================
# 修改：更换清除伤害的算法，以防万一
# 本内容在脚本中没有使用过
#=======================================
def dispose_damage
for damage in @_damage.reverse
damage[0].bitmap.dispose
damage[0].dispose
@_damage.delete(damage)
end
@_total_damage = 0
@_last_frame = -1
if @_total_damage_sprite != nil
@_total_damage_duration = 0
@_total_damage_sprite.bitmap.dispose
@_total_damage_sprite.dispose
@_total_damage_sprite = nil
end
end
#=======================================
# 清除hit数★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#=======================================
def dispose_hit
if @_hits_sprite != nil
@_hits_sprite.bitmap.dispose
@_hits_sprite.dispose
@_hits_sprite = nil
end
end
def dispose_animation
#=======================================
# 修改：清除记录的伤害，清除权重记录
#=======================================
@battler_damage = nil
@battler_critical = nil
@all_quanzhong = 1
@_total_damage = 0
@_last_frame = -1
if @_animation_sprites != nil
sprite = @_animation_sprites[0]
if sprite != nil
@@_reference_count[sprite.bitmap] -= 1
if @@_reference_count[sprite.bitmap] == 0
sprite.bitmap.dispose
end
end
for sprite in @_animation_sprites
sprite.dispose
end
@_animation_sprites = nil
@_animation = nil
end
end
def update
super
if @_whiten_duration > 0
@_whiten_duration -= 1
self.color.alpha = 128 - (16 - @_whiten_duration) * 10
end
if @_appear_duration > 0
@_appear_duration -= 1
self.opacity = (16 - @_appear_duration) * 16
end
if @_escape_duration > 0
@_escape_duration -= 1
self.opacity = 256 - (32 - @_escape_duration) * 10
end
if @_collapse_duration > 0
@_collapse_duration -= 1
self.opacity = 256 - (48 - @_collapse_duration) * 6
end
#=======================================
# 修改：更新算法，更新弹出
#=======================================
if @_damage_duration > 0
@_damage_duration -= 1
for damage in @_damage
damage[0].x = self.x + self.viewport.rect.x -
self.ox + self.src_rect.width / 2 +
(40 - damage[1]) * damage[3] / 10
damage[0].y -= damage[4]+damage[1]/10
damage[0].opacity = damage[1]*20
damage[1] -= 1
if damage[1]==0
damage[0].bitmap.dispose
damage[0].dispose
@_damage.delete(damage)
next
end
end
end
#=======================================
# 添加：弹出总伤害
#=======================================
if @_total_damage_duration > 0
@_total_damage_duration -= 1
@_total_damage_sprite.y -= 1 if @_total_damage_duration % 2 == 0
if @_total_damage_sprite.zoom_x > 1.0
@_total_damage_sprite.zoom_x -= 0.05
end
if @_total_damage_sprite.zoom_y > 1.0
@_total_damage_sprite.zoom_y -= 0.05
end
@_total_damage_sprite.opacity = 256 - (24 - @_total_damage_duration) * 16
if @_total_damage_duration <= 0
dispose_hit#★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
@_total_damage = 0
@_total_damage_duration = 0
@_total_damage_sprite.bitmap.dispose
@_total_damage_sprite.dispose
@_total_damage_sprite = nil
end
end
#=======================================
if @_animation != nil and (Graphics.frame_count % 2 == 0)
@_animation_duration -= 1
update_animation
end
if @_loop_animation != nil and (Graphics.frame_count % 2 == 0)
update_loop_animation
@_loop_animation_index += 1
@_loop_animation_index %= @_loop_animation.frame_max
end
if @_blink
@_blink_count = (@_blink_count + 1) % 32
if @_blink_count < 16
alpha = (16 - @_blink_count) * 6
else
alpha = (@_blink_count - 16) * 6
end
self.color.set(255, 255, 255, alpha)
end
@@_animations.clear
end
def update_animation
if @_animation_duration > 0
frame_index = @_animation.frame_max - @_animation_duration
cell_data = @_animation.frames[frame_index].cell_data
position = @_animation.position
animation_set_sprites(@_animation_sprites, cell_data, position)
#=======================================
# 修改：弹出伤害，权重计算
#=======================================
for timing in @_animation.timings
if timing.frame == frame_index
t = 1.0 * animation_process_timing(timing, @_animation_hit)
if timing.se.name != ""
se=timing.se
Audio.se_play("Audio/SE/" + se.name, se.volume, se.pitch)
end
#p t,"当前权重", @all_quanzhong,"总权重"
if @battler_damage.is_a?(Numeric) and t != 0
t *= @battler_damage
t /= @all_quanzhong
t = t.to_i
#在闪光不是最后一次的情况下,把这次伤害加入到已经发生的伤害中★★★★★★★★★★★★★★★★★★★★★★★★★★
if frame_index != @_last_frame
@p_dam+= t
end
#p @p_dam,"已发生伤害",@battler_damage,"总伤害"(调试用)★★★★★★★★★★★★★★★★★★★★★★★★★★
#闪光为最后一次的情况下,改变这次伤害的计算方法(总伤害-已经发生伤害)★★★★★★★★★★★★★★★★★★★★★★★★★★
if frame_index == @_last_frame
t=@battler_damage-@p_dam
end
#p t,"当前伤害",@battler_damage,"总伤害"
# 最后一次闪光的话，伤害修正
if frame_index == @_last_frame
@_total_damage = @battler_damage - t
@p_dam=0 #已经发生的伤害归0★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
end
#p t,@battler_damage,@all_quanzhong
damage(t,@battler_critical)
#连击次数归0★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
if frame_index == @_last_frame
@hits=0
end
# 防止重复播放miss
elsif !@battler_damage.is_a?(Numeric) and timing.flash_scope != 0
damage(@battler_damage,@battler_critical)
end
end
end
else
dispose_animation
end
end
#=======================================
# 修改：敌人跳跃的功能 + 添加返回数值
#=======================================
def animation_process_timing(timing, hit,dontflash=false)
if (timing.condition == 0) or
(timing.condition == 1 and hit == true) or
(timing.condition == 2 and hit == false)
case timing.flash_scope
when 1
unless dontflash
self.flash(timing.flash_color, timing.flash_duration * 2)
if @_total_damage >0
@flash_shake_switch = true
@flash_shake = 10
end
end
return timing.flash_color.alpha * timing.flash_duration
when 2
unless dontflash
if self.viewport != nil
self.viewport.flash(timing.flash_color, timing.flash_duration * 2)
end
end
return timing.flash_color.alpha * timing.flash_duration
when 3
unless dontflash
self.flash(nil, timing.flash_duration * 2)
end
return timing.flash_color.alpha * timing.flash_duration
end
end
return 0
end
end
end

复制代码

$ud_ok = true #上下失效
$airjump = 1 #空中连跳
#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================
# ————————————————————————————————————
# 全方向ドット移動 Ver ε
# 配布元・サポートURL
# http://members.jcom.home.ne.jp/cogwheel/
#==============================================================================
# ■ Game_Player
#------------------------------------------------------------------------------
# 　プレイヤーを扱うクラスです。イベントの起動判定や、マップのスクロールなどの
# 機能を持っています。このクラスのインスタンスは $game_player で参照されます。
#==============================================================================
class Game_Player < Game_Character
#--------------------------------------------------------------------------
# ● 定数
#--------------------------------------------------------------------------
UP = 48 # 上方向の余裕(0 < UP < 63)
DOWN = 16 # 下方向の余裕(0 < DOWN <63)
SIDE = 32 # 左右方向の余裕(0 < SIDE <63)
SLANT = false # 移動ルートの斜め移動時、速度修正
JUMPADD = 10
#--------------------------------------------------------------------------
# ● 公開インスタンス変数
#--------------------------------------------------------------------------
attr_reader :event # イベント時移動速度
attr_accessor :move_speed # 移動速度
#--------------------------------------------------------------------------
# ● フレーム更新
#--------------------------------------------------------------------------
alias :update_original :update
def update
# @walk:歩行速度 @dash:ダッシュ時移動速度
# @event:イベント時移動速度（0の時は、イベント時に速度変更をしない）
@JUMPMAX = $game_variables[1]
@walk = 4
@dash = 5
@event = 4
@dot_m = true
#ダッシュ機能。エンターキーが押されている間、移動速度を変更する。
unless moving? or $game_system.map_interpreter.running? or
@move_route_forcing or $game_temp.message_window_showing
if @walk != @dash
if Input.press?(Input::C)
if @move_speed != @dash
if $game_switches[2]
@move_speed = @dash
end
end
else
if @move_speed != @walk
@move_speed = @walk
end
end
end
end
if @revise_x == nil and @revise_y == nil
@revise_x = 0
@revise_y = 0
end
unless @dot_m
update_original
return
end
if @move_route_forcing
# ローカル変数に移動中かどうかを記憶
last_moving = moving?
# ローカル変数に座標を記憶
last_real_x = @real_x
last_real_y = @real_y
# 座標がずれている場合
if (@revise_x != 0 or @revise_y != 0) and not jumping? and @move == true
if @revise_x != @real_x - @x * 128 or @revise_y != @real_y - @y * 128
@revise_x = @real_x - @x * 128
@revise_y = @real_y - @y * 128
end
# 移動距離distance1と目標距離distance2を設定
distance1 = 2 ** @move_speed
distance2 = Math.sqrt(@revise_x ** 2 + @revise_y ** 2)
# 移動距離が目標距離を越えた場合
if distance1 > distance2
# 強制的に補正座標を零にする
@real_x = @real_x - @revise_x
@real_y = @real_y - @revise_y
@revise_x = 0
@revise_y = 0
anime_update
# 移動距離が目標距離に達しない場合
else
# 移動距離分目標距離に近づく
@real_x -= (distance1 * @revise_x / distance2).round
@real_y -= (distance1 * @revise_y / distance2).round
@revise_x = @real_x - @x * 128
@revise_y = @real_y - @y * 128
anime_update
end
else
super
end
else
@move = false
# 移動中、イベント実行中、移動ルート強制中、
# メッセージウィンドウ表示中のいずれでもない場合
unless moving? or $game_system.map_interpreter.running? or
@move_route_forcing or $game_temp.message_window_showing
@event_run = false
# 方向ボタンが押されていれば、その方向へプレイヤーを移動
#---------------------------上下失效-----------------------------------------
case Input.dir8
when 1
$ud_ok ? move_lower_left_p : move_left_p
when 2
# $ud_ok ? move_down_p : move_down_aaaagq
move_down_p if $ud_ok
when 3
$ud_ok ? move_lower_right_p : move_right_p
when 4
move_left_p
when 6
move_right_p
when 7
$ud_ok ? move_upper_left_p : move_left_p
when 8
# $ud_ok ? move_up_p : move_up_aaaagq
move_up_p if $ud_ok
when 9
$ud_ok ? move_upper_right_p : move_right_p
end
end
# ローカル変数に座標を記憶
last_real_x = @real_x
last_real_y = @real_y
# 移動処理
@real_x = @x * 128 + @revise_x
@real_y = @y * 128 + @revise_y
# ローカル変数に移動中かどうかを記憶
last_moving = moving?
# 座標更新
move_on
# 現在の座標と以前の座標が異なる場合
if (last_real_x != @real_x or last_real_y != @real_y)
@move_distance = 0 if @move_distance == nil
@move_distance += Math.sqrt((last_real_x - @real_x) ** 2 +
(last_real_y - @real_y) ** 2)
if @move_distance >= 128
@move_distance %= 128
increase_steps
end
# アニメーションを更新
anime_update
else
@pattern = 0
end
end
# キャラクターが下に移動し、かつ画面上の位置が中央より下の場合
if @real_y > last_real_y and @real_y - $game_map.display_y > CENTER_Y
# マップを下にスクロール
$game_map.scroll_down(@real_y - last_real_y)
end
# キャラクターが左に移動し、かつ画面上の位置が中央より左の場合
if @real_x < last_real_x and @real_x - $game_map.display_x < CENTER_X
# マップを左にスクロール
$game_map.scroll_left(last_real_x - @real_x)
end
# キャラクターが右に移動し、かつ画面上の位置が中央より右の場合
if @real_x > last_real_x and @real_x - $game_map.display_x > CENTER_X
# マップを右にスクロール
$game_map.scroll_right(@real_x - last_real_x)
end
# キャラクターが上に移動し、かつ画面上の位置が中央より上の場合
if @real_y < last_real_y and @real_y - $game_map.display_y < CENTER_Y
# マップを上にスクロール
$game_map.scroll_up(last_real_y - @real_y)
end
# 前回プレイヤーが移動中だった場合
if last_moving
# 同位置のイベントとの接触によるイベント起動判定
result = check_event_trigger_here([1,2])
if result == true
if (last_real_x / 128.0).round != @x and
(last_real_y / 128.0).round != @y
if @direction == 2 or @direction == 8
if (last_real_x / 128.0).round > @x
turn_left
else
turn_right
end
else
if (last_real_y / 128.0).round > @y
turn_up
else
turn_down
end
end
elsif (last_real_x / 128.0).round > @x
turn_left
elsif (last_real_x / 128.0).round < @x
turn_right
elsif (last_real_y / 128.0).round > @y
turn_up
elsif (last_real_y / 128.0).round < @y
turn_down
end
end
# 起動したイベントがない場合
if result == false
# デバッグモードが ON かつ CTRL キーが押されている場合を除き
unless $DEBUG and Input.press?(Input::CTRL)
# エンカウントカウントダウン
if @encounter_count > 0
@encounter_count -= 1
end
end
end
end
#-----------------------按跳跃-----------------------------------------------
# A ボタンが押された場合
if Input.press?(Input::A) and not $ud_ok
@twojump = 1 if @twojump == 0 and down1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, 5, true)
if (not @apassed) and @twojump <= $airjump
Audio.se_play("Audio/SE/016-Jump02")
@apassed = true
@jumpnow = @JUMPMAX
@twojump += 1
else
@jumpnow += 3
end
else
@apassed = false
end
#----------------------自由落体--------------------------------
if not $ud_ok
@jumpnow -= 10
if @jumpnow < 0
@jumpnow = [@jumpnow, -@JUMPMAX].max
if not down1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, -@jumpnow, true)
@jumpnow = 0
@twojump = 0
end
elsif @jumpnow > 0
@jumpnow = [@jumpnow, @JUMPMAX].min
if not up1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, @jumpnow, true)
@jumpnow = 0
end
end
end
if Input.trigger?(Input::C)
# 同位置および正面のイベント起動判定
check_event_trigger_here([0])
check_event_trigger_there([0,1,2])
end
end
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize
@jumpnow = 0
@twojump = 0
@apassed = false
@revise_x = 0
@revise_y = 0
@move == false
super
end
#--------------------------------------------------------------------------
# ● 移動判定
#--------------------------------------------------------------------------
def moving?
unless @dot_m
result = super
return result
end
# 強制移動の場合オリジナルの判定をさせる
if @move_route_forcing
if @move == false
return false
end
super
# 通常時は現座標が実座標と異なる場合のみ移動中と判定
else
return (@x != (@real_x / 128.0).round or @y != (@real_y / 128.0).round)
end
end
#--------------------------------------------------------------------------
# ● 移動判定
#--------------------------------------------------------------------------
def moving_a?
if @move == false
if (@move_route.list[@move_route_index].code <= 14 or
@move_route.list[@move_route_index].code == 25)
@move = true
end
return false
end
moving?
end
#--------------------------------------------------------------------------
# ● フレーム更新 (ジャンプ)
#--------------------------------------------------------------------------
def update_jump
# ジャンプカウントを 1 減らす
@jump_count -= 1
# 新しい座標を計算
@real_x = (@real_x * @jump_count + @x * 128) / (@jump_count + 1)
@real_y = (@real_y * @jump_count + @y * 128) / (@jump_count + 1)
if @jump_count == 0
@revise_x = 0
@revise_y = 0
end
end
#--------------------------------------------------------------------------
# ● 移動タイプ : カスタム
#--------------------------------------------------------------------------
def move_type_custom
unless @dot_m
super
return
end
# 停止中でなければ中断
if jumping? or moving_a?
return
end
# 移動コマンドのリストの最後に到達するまでループ
while @move_route_index < @move_route.list.size
# 移動コマンドを取得
command = @move_route.list[@move_route_index]
# コマンドコード 0 番 (リストの最後) の場合
if command.code == 0
# オプション [動作を繰り返す] が ON の場合
if @move_route.repeat
# 移動ルートのインデックスを最初に戻す
@move_route_index = 0
end
# オプション [動作を繰り返す] が OFF の場合
unless @move_route.repeat
# 移動ルート強制中の場合
if @move_route_forcing and not @move_route.repeat
# 移動ルートの強制を解除
@move_route_forcing = false
# オリジナルの移動ルートを復帰
@move_route = @original_move_route
@move_route_index = @original_move_route_index
@original_move_route = nil
end
# 停止カウントをクリア
@stop_count = 0
end
return
end
# 移動系コマンド (下に移動～ジャンプ) の場合
if command.code <= 14
# コマンドコードで分岐
case command.code
when 1 # 下に移動
move_down
when 2 # 左に移動
move_left
when 3 # 右に移動
move_right
when 4 # 上に移動
move_up
when 5 # 左下に移動
move_lower_left
when 6 # 右下に移動
move_lower_right
when 7 # 左上に移動
move_upper_left
when 8 # 右上に移動
move_upper_right
when 9 # ランダムに移動
move_random
when 10 # プレイヤーに近づく
move_toward_player
when 11 # プレイヤーから遠ざかる
move_away_from_player
when 12 # 一歩前進
move_forward
when 13 # 一歩後退
move_backward
when 14 # ジャンプ
jump(command.parameters[0], command.parameters[1])
end
# オプション [移動できない場合は無視] が OFF で、移動失敗の場合
if not @move_route.skippable and not moving? and not jumping?
return
end
@move_route_index += 1
return
end
# ウェイトの場合
if command.code == 15
# ウェイトカウントを設定
@wait_count = command.parameters[0] * 2 - 1
@move_route_index += 1
return
end
# 向き変更系のコマンドの場合
if command.code >= 16 and command.code <= 26
# コマンドコードで分岐
case command.code
when 16 # 下を向く
turn_down
when 17 # 左を向く
turn_left
when 18 # 右を向く
turn_right
when 19 # 上を向く
turn_up
when 20 # 右に 90 度回転
turn_right_90
when 21 # 左に 90 度回転
turn_left_90
when 22 # 180 度回転
turn_180
when 23 # 右か左に 90 度回転
turn_right_or_left_90
when 24 # ランダムに方向転換
turn_random
when 25 # プレイヤーの方を向く
turn_toward_player
when 26 # プレイヤーの逆を向く
turn_away_from_player
end
@move_route_index += 1
return
end
# その他のコマンドの場合
if command.code >= 27
# コマンドコードで分岐
case command.code
when 27 # スイッチ ON
$game_switches[command.parameters[0]] = true
$game_map.need_refresh = true
when 28 # スイッチ OFF
$game_switches[command.parameters[0]] = false
$game_map.need_refresh = true
when 29 # 移動速度の変更
@move_speed = command.parameters[0]
when 30 # 移動頻度の変更
@move_frequency = command.parameters[0]
when 31 # 移動時アニメ ON
@walk_anime = true
when 32 # 移動時アニメ OFF
@walk_anime = false
when 33 # 停止時アニメ ON
@step_anime = true
when 34 # 停止時アニメ OFF
@step_anime = false
when 35 # 向き固定 ON
@direction_fix = true
when 36 # 向き固定 OFF
@direction_fix = false
when 37 # すり抜け ON
@through = true
when 38 # すり抜け OFF
@through = false
when 39 # 最前面に表示 ON
@always_on_top = true
when 40 # 最前面に表示 OFF
@always_on_top = false
when 41 # グラフィック変更
@tile_id = 0
@character_name = command.parameters[0]
@character_hue = command.parameters[1]
if @original_direction != command.parameters[2]
@direction = command.parameters[2]
@original_direction = @direction
@prelock_direction = 0
end
if @original_pattern != command.parameters[3]
@pattern = command.parameters[3]
@original_pattern = @pattern
end
when 42 # 不透明度の変更
@opacity = command.parameters[0]
when 43 # 合成方法の変更
@blend_type = command.parameters[0]
when 44 # SE の演奏
$game_system.se_play(command.parameters[0])
when 45 # スクリプト
result = eval(command.parameters[0])
end
@move_route_index += 1
return
end
end
end
#--------------------------------------------------------------------------
# ● 下に移動
#--------------------------------------------------------------------------
def move_down_p
# 下を向く
turn_down
# 移動距離を算出
distance = 2 ** @move_speed
down1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance, true)
end
def move_down_aaaagq
distance = 2 ** @move_speed
down1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance, true)
end
#--------------------------------------------------------------------------
# ● 下に移動可能かどうかの判定１
#--------------------------------------------------------------------------
def down1(x, y, distance, down = false)
result = down2(x, y, distance)
if result == false
@event_run = check_event_trigger_touch(x, y+1)
return result
end
if @revise_x < -SIDE
result = down2(x, y + 1, distance, 4)
result &= down2(x - 1, y, distance)
if result == false
if down
move_lower_right_p
if @revise_x > SIDE
@revise_x = SIDE
end
end
return result
end
elsif @revise_x > SIDE
result = down2(x, y + 1, distance, 6)
result &= down2(x + 1, y, distance)
if result == false
if down
move_lower_left_p
if @revise_x < -SIDE
@revise_x = -SIDE
end
end
return result
end
end
# 下に移動可能ならば距離分移動
@revise_y += distance
return result
end
#--------------------------------------------------------------------------
# ● 下に移動可能かどうかの判定２
#--------------------------------------------------------------------------
def down2(x, y, distance, d = 2)
if @revise_y + distance > DOWN
unless passable?(x, y, d)
if @revise_y < DOWN
@revise_y = DOWN
end
return false
end
end
return true
end
#--------------------------------------------------------------------------
# ● 左に移動
#--------------------------------------------------------------------------
def move_left_p
# 左を向く
turn_left
distance = 2 ** @move_speed
left1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance, true)
end
#--------------------------------------------------------------------------
# ● 左に移動可能かどうかの判定１
#--------------------------------------------------------------------------
def left1(x, y, distance, left = false)
result = left2(x, y, distance)
if result == false
@event_run = check_event_trigger_touch(x-1, y)
return result
end
if @revise_y < -UP and $ud_ok
result = left2(x - 1, y, distance, 8)
result &= left2(x, y - 1, distance)

复制代码

if result == false
if left
move_lower_left_p
if @revise_y > DOWN
@revise_y = DOWN
end
end
return result
end
elsif @revise_y > DOWN and $ud_ok
result = left2(x - 1, y, distance, 2)
result &= left2(x, y + 1, distance)
if result == false
if left
move_upper_left_p
if @revise_y < -UP
@revise_y = -UP
end
end
return result
end
end
@revise_x -= distance
return result
end
#--------------------------------------------------------------------------
# ● 左に移動可能かどうかの判定２
#--------------------------------------------------------------------------
def left2(x, y, distance, d = 4)
if @revise_x - distance < -SIDE
unless passable?(x, y, d)
if @revise_x > -SIDE
@revise_x = -SIDE
end
return false
end
end
return true
end
#--------------------------------------------------------------------------
# ● 右に移動
#--------------------------------------------------------------------------
def move_right_p
# 右を向く
turn_right
distance = 2 ** @move_speed
right1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance, true)
end
#--------------------------------------------------------------------------
# ● 右に移動可能かどうかの判定１
#--------------------------------------------------------------------------
def right1(x, y, distance, right = false)
result = right2(x, y, distance)
if result == false
@event_run = check_event_trigger_touch(x+1, y)
return result
end
if @revise_y < -UP and $ud_ok
result = right2(x + 1, y, distance, 8)
result &= right2(x, y - 1, distance)
if result == false
if right
move_lower_right_p
if @revise_y > DOWN
@revise_y = DOWN
end
end
return result
end
elsif @revise_y > DOWN and $ud_ok
result = right2(x + 1, y, distance, 2)
result &= right2(x, y + 1, distance)
if result == false
if right
move_upper_right_p
if @revise_y < -UP
@revise_y = -UP
end
end
return result
end
end
@revise_x += distance
return result
end
#--------------------------------------------------------------------------
# ● 右に移動可能かどうかの判定２
#--------------------------------------------------------------------------
def right2(x, y, distance, d = 6)
if @revise_x + distance > SIDE
unless passable?(x, y, d)
if @revise_x < SIDE
@revise_x = SIDE
end
return false
end
end
return true
end
#--------------------------------------------------------------------------
# ● 上に移動
#--------------------------------------------------------------------------
def move_up_p
# 上を向く
turn_up
# 下に移動
distance = 2 ** @move_speed
up1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance, true)
end
def move_up_aaaagq
distance = 2 ** @move_speed
up1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance, true)
end
#--------------------------------------------------------------------------
# ● 上に移動可能かどうかの判定１
#--------------------------------------------------------------------------
def up1(x, y, distance, up = false)
result = up2(x, y, distance)
if result == false
@event_run = check_event_trigger_touch(x, y-1)
return result
end
if @revise_x < -SIDE
result = up2(x, y - 1, distance, 4)
result &= up2(x - 1, y, distance)
if result == false
if up
move_upper_right_p
if @revise_x > SIDE
@revise_x = SIDE
end
end
return result
end
elsif @revise_x > SIDE
result = up2(x, y - 1, distance, 6)
result &= up2(x + 1, y, distance)
if result == false
if up
move_upper_left_p
if @revise_x < -SIDE
@revise_x = -SIDE
end
end
return result
end
end
@revise_y -= distance
return result
end
#--------------------------------------------------------------------------
# ● 上に移動可能かどうかの判定２
#--------------------------------------------------------------------------
def up2(x, y, distance, d = 8)
if @revise_y - distance < -UP
unless passable?(x, y, d)
if @revise_y > -UP
@revise_y = -UP
end
return false
end
end
return true
end
#--------------------------------------------------------------------------
# ● 左下に移動
#--------------------------------------------------------------------------
def move_lower_left_p
# 向き固定でない場合
unless @direction_fix
# 右向きだった場合は左を、上向きだった場合は下を向く
@direction = (@direction == 6 ? 4 : @direction == 8 ? 2 : @direction)
end
# 左下に移動
distance = (2 ** @move_speed) / Math.sqrt(2)
if @direction == 2
turn_left unless down1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_down if @event_run
unless @event_run
if last_move?(@real_x, @real_y, 2, distance)
result = check_event_trigger_here([1,2], false)
if result == true
return
end
end
move_on
if @revise_y > DOWN and -UP > @revise_y - distance
@revise_y = DOWN
end
turn_down unless left1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_left if @event_run
end
else
turn_down unless left1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_left if @event_run
unless @event_run
if last_move?(@real_x, @real_y, 4, distance)
result = check_event_trigger_here([1,2], false)
if result == true
return
end
end
move_on
if @revise_x + distance> SIDE and -SIDE > @revise_x
@revise_x = -SIDE
end
turn_left unless down1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_down if @event_run
end
end
end
#--------------------------------------------------------------------------
# ● 右下に移動
#--------------------------------------------------------------------------
def move_lower_right_p
# 向き固定でない場合
unless @direction_fix
# 左向きだった場合は右を、上向きだった場合は下を向く
@direction = (@direction == 4 ? 6 : @direction == 8 ? 2 : @direction)
end
# 右下に移動
distance = (2 ** @move_speed) / Math.sqrt(2)
if @direction == 2
turn_right unless down1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_down if @event_run
unless @event_run
if last_move?(@real_x, @real_y, 2, distance)
result = check_event_trigger_here([1,2], false)
if result == true
return
end
end
move_on
if @revise_y > DOWN and -UP > @revise_y - distance
@revise_y = DOWN
end
turn_down unless right1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_right if @event_run
end
else
turn_down unless right1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_right if @event_run
unless @event_run
if last_move?(@real_x, @real_y, 6, distance)
result = check_event_trigger_here([1,2], false)
if result == true
return
end
end
move_on
if @revise_x > SIDE and -SIDE > @revise_x - distance
@revise_x = SIDE
end
turn_right unless down1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_down if @event_run
end
end
end
#--------------------------------------------------------------------------
# ● 左上に移動
#--------------------------------------------------------------------------
def move_upper_left_p
# 向き固定でない場合
unless @direction_fix
# 右向きだった場合は左を、下向きだった場合は上を向く
@direction = (@direction == 6 ? 4 : @direction == 2 ? 8 : @direction)
end
# 左上に移動
distance = (2 ** @move_speed) / Math.sqrt(2)
if @direction == 8
turn_left unless up1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_up if @event_run
unless @event_run
if last_move?(@real_x, @real_y, 8, distance)
result = check_event_trigger_here([1,2], false)
if result == true
return
end
end
move_on
if @revise_y + distance > DOWN and -UP > @revise_y
@revise_y = -UP
end
turn_up unless left1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_left if @event_run
end
else
turn_up unless left1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_left if @event_run
unless @event_run
if last_move?(@real_x, @real_y, 4, distance)
result = check_event_trigger_here([1,2], false)
if result == true
return
end
end
move_on
if @revise_x > SIDE and -SIDE > @revise_x - distance
@revise_x = SIDE
end
turn_left unless up1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_up if @event_run
end
end
end
#--------------------------------------------------------------------------
# ● 右上に移動
#--------------------------------------------------------------------------
def move_upper_right_p
# 向き固定でない場合
unless @direction_fix
# 左向きだった場合は右を、下向きだった場合は上を向く
@direction = (@direction == 4 ? 6 : @direction == 2 ? 8 : @direction)
end
# 右上に移動
distance = (2 ** @move_speed) / Math.sqrt(2)
if @direction == 8
turn_right unless up1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_up if @event_run
unless @event_run
if last_move?(@real_x, @real_y, 8, distance)
result = check_event_trigger_here([1,2], false)
if result == true
return
end
end
move_on
if @revise_y + distance > DOWN and -UP > @revise_y
@revise_y = -UP
end
turn_up unless right1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_right if @event_run
end
else
turn_up unless right1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_right if @event_run
unless @event_run
if last_move?(@real_x, @real_y, 6, distance)
result = check_event_trigger_here([1,2], false)
if result == true
return
end
end
move_on
if @revise_x > SIDE and -SIDE > @revise_x - distance
@revise_x = SIDE
end
turn_right unless up1(((@x * 128 + @revise_x) / 128.0).round,
((@y * 128 + @revise_y) / 128.0).round, distance)
turn_up if @event_run
end
end
end
#--------------------------------------------------------------------------
# ● 同位置のイベント起動判定
#--------------------------------------------------------------------------
def check_event_trigger_here(triggers, run = true)
result = false
# イベント実行中の場合
if $game_system.map_interpreter.running?
return result
end
# 全イベントのループ
for event in $game_map.events.values
# イベントの座標とトリガーが一致した場合
if event.x == ((@x * 128 + @revise_x) / 128.0).round and
event.y == ((@y * 128 + @revise_y) / 128.0).round and
triggers.include?(event.trigger)
# ジャンプ中以外で、起動判定が同位置のイベントなら
if not event.jumping? and event.over_trigger?
if event.list.size > 1
if run == true
event.start
end
result = true
end
end
end
end
return result
end
#--------------------------------------------------------------------------
# ● 座標修正
#--------------------------------------------------------------------------
def move_on
if @y < (@y + @revise_y / 128.0).round
@y += 1
@revise_y -= 128
end
if @x > (@x + @revise_x / 128.0).round
@x -= 1
@revise_x += 128
end
if @x < (@x + @revise_x / 128.0).round
@x += 1
@revise_x -= 128
end
if @y > (@y + @revise_y / 128.0).round
@y -= 1
@revise_y += 128
end
end
#--------------------------------------------------------------------------
# ● アニメーションアップデート
#--------------------------------------------------------------------------
def anime_update
# 移動時アニメが ON の場合
if @walk_anime
# アニメカウントを 1.5 増やす
@anime_count += 5
# 移動時アニメが OFF で、停止時アニメが ON の場合
elsif @step_anime
# アニメカウントを 1 増やす
@anime_count += 1
end
# アニメカウントが最大値を超えた場合
# ※最大値は、基本値 18 から移動速度 * 1 を引いた値
if @anime_count > 18 - @move_speed * 2
# 停止時アニメが OFF かつ停止中の場合
if not @step_anime and @stop_count > 0
# パターンをオリジナルに戻す
@pattern = @original_pattern
# 停止時アニメが ON または移動中の場合
else
# パターンを更新
@pattern = (@pattern + 1) % 9
end
# アニメカウントをクリア
@anime_count = 0
end
end
#--------------------------------------------------------------------------
# ● 指定位置に移動
#--------------------------------------------------------------------------
# オリジナルのイベントを改名
alias :moveto_original :moveto
def moveto(x, y)
# 補正座標を初期化
@revise_x = 0
@revise_y = 0
# オリジナルのイベントを呼び出し
moveto_original(x, y)
end
#--------------------------------------------------------------------------
# ● 移動したかどうかの判定
#--------------------------------------------------------------------------
def last_move?(x, y, direction, distance)
if direction == 2 or direction == 6
distance *= -1
end
if (direction == 2 or direction == 8) and
(y / 128.0).round != ((y - distance) / 128.0).round
return true
end
if (direction == 4 or direction == 6) and
(x / 128.0).round != ((x - distance) / 128.0).round
return true
end
return false
end
end
#==============================================================================
# ■ Game_Character (分割定義 1)
#------------------------------------------------------------------------------
# 　キャラクターを扱うクラスです。このクラスは Game_Player クラスと Game_Event
# クラスのスーパークラスとして使用されます。
#==============================================================================
class Game_Character
#--------------------------------------------------------------------------
# ● フレーム更新 (移動)
#--------------------------------------------------------------------------
def update_move
# 移動速度からマップ座標系での移動距離に変換
distance = 2 ** @move_speed
if @x * 128 != @real_x and @y * 128 != @real_y and Game_Player::SLANT
distance /= Math.sqrt(2)
end
# 論理座標が実座標より下の場合
if @y * 128 > @real_y
# 下に移動
@real_y = [@real_y + distance, @y * 128].min
end
# 論理座標が実座標より左の場合
if @x * 128 < @real_x
# 左に移動
@real_x = [@real_x - distance, @x * 128].max
end
# 論理座標が実座標より右の場合
if @x * 128 > @real_x
# 右に移動
@real_x = [@real_x + distance, @x * 128].min
end
# 論理座標が実座標より上の場合
if @y * 128 < @real_y
# 上に移動
@real_y = [@real_y - distance, @y * 128].max
end
# 移動時アニメが ON の場合
if @walk_anime
# アニメカウントを 1.5 増やす
@anime_count += 1.5
# 移動時アニメが OFF で、停止時アニメが ON の場合
elsif @step_anime
# アニメカウントを 1 増やす
@anime_count += 1
end
end
end
#==============================================================================
# ■ Game_Event
#------------------------------------------------------------------------------
# 　イベントを扱うクラスです。条件判定によるイベントページ切り替えや、並列処理
# イベント実行などの機能を持っており、Game_Map クラスの内部で使用されます。
#==============================================================================
class Game_Event < Game_Character
#--------------------------------------------------------------------------
# ● イベント起動
#--------------------------------------------------------------------------
def start
# 実行内容が空でない場合
if @list.size > 1
# $game_player.event が0でない場合
if $game_player.event != 0
# 移動速度を $game_player.event にする
$game_player.move_speed = $game_player.event
end
@starting = true
end
end
end
#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================

复制代码