关于导入图片作为地图的问题

用疯狂拯救世界 发表于 2012-9-23 00:04:54

a364774426 发表于 2012-9-22 12:23
如果是总体质量上来说，我们的游戏的确不如国外的游戏。
做游戏不是为了哗众取宠，不是为了三分钟热度。
...

第二个脚本没有“复制代码”啊，直接复制得到的代码没有回车全在一行了，请大神再帮帮忙吧！

点评

a364774426

已改发表于 2012-9-23 10:13

用疯狂拯救世界 发表于 2012-9-22 23:49:47

a364774426 发表于 2012-9-22 12:23
如果是总体质量上来说，我们的游戏的确不如国外的游戏。
做游戏不是为了哗众取宠，不是为了三分钟热度。
...

最后一句受鼓舞了

a364774426 发表于 2012-9-22 12:23:07

用疯狂拯救世界发表于 2012-9-22 12:09
论坛上之前有个地图大赛擂台赛，看了之后觉得前几名的都画得很不错，后来又上了国外的网站看了他们的作品 ...

如果是总体质量上来说，我们的游戏的确不如国外的游戏。
做游戏不是为了哗众取宠，不是为了三分钟热度。
因为喜爱，然后坚持地做下去，并且不断改善。做到这一点，那么我们游戏的质量也会提高。
至于素材的问题，我们有人能够制作不逊色于VS或STREAMPNUK的图块，为什么没有，
不然就不会有各种画面都很好的网游出现了。
我认为原因是“不值得为这类的游戏投入这样的精力”
至于阁下最后一句，有漂亮的地图，那么就会给玩游戏提供了一个心情愉悦的大好基础。
哈哈，我看好你哦。

用疯狂拯救世界 发表于 2012-9-22 12:09:09

a364774426 发表于 2012-9-22 11:41
说起来，也就是那样的效果了。给你两个脚本。
脚本一：脚本二：
######################################## ...

论坛上之前有个地图大赛擂台赛，看了之后觉得前几名的都画得很不错，后来又上了国外的网站看了他们的作品，发现同是用VX、VA画出来的地图，我们跟他们还是有一定的距离，而且我还发现论坛里那个地图擂台赛前几名里面有一个地图作品跟国外某个地图相似度非常高，所用的素材也是那个网站上提供的，觉得很可悲。
外国论坛上的地图画得好，我觉得部分原因是他们有很好的美工，地图元素比我们论坛的库存丰富得多，而且质量高，都是共享出来的，我们现在用的非原装地图素材都是从他们那里抠回来的。
玩家在游戏中的大部分时间都是在地图上行走，所以为了提高地图的质量，我觉得还是很有必要花多点功夫的。

a364774426 发表于 2012-9-22 11:41:07

本帖最后由 a364774426 于 2012-9-23 10:12 编辑

说起来，也就是那样的效果了。给你两个脚本。
脚本一：

#==============================================================================
# ** Spriteset_Map
#------------------------------------------------------------------------------
# This class brings together map screen sprites, tilemaps, etc. It's used
# within the Scene_Map class.
#==============================================================================
class Spriteset_Map
#--------------------------------------------------------------------------
# * Object Initialization
#--------------------------------------------------------------------------
def initialize
#GROUND OVERLAY#
@GroundON = FileTest.exist?("Overlays/" + "ground" + $game_map.map_id.to_s + ".png")
create_viewports
create_tilemap
create_parallax
create_characters
create_shadow
create_weather
create_pictures
create_timer
update
end
#--------------------------------------------------------------------------
# * Create Viewport
#--------------------------------------------------------------------------
def create_viewports
@viewport1 = Viewport.new(0, 0, 800, 480)
@viewport2 = Viewport.new(0, 0, 800, 480)
@viewport3 = Viewport.new(0, 0, 800, 480)
@viewport2.z = 50
@viewport3.z = 100
@viewport7 = Viewport.new(0, 0, 800, 480)
end
#--------------------------------------------------------------------------
# * Create Tilemap
#--------------------------------------------------------------------------
def create_tilemap
@tilemap = Tilemap.new(@viewport1)
@tilemap.bitmaps[0] = Cache.system("TileA1")
@tilemap.bitmaps[1] = Cache.system("TileA2")
@tilemap.bitmaps[2] = Cache.system("TileA3")
@tilemap.bitmaps[3] = Cache.system("TileA4")
@tilemap.bitmaps[4] = Cache.system("TileA5")
@tilemap.bitmaps[5] = Cache.system("TileB")
@tilemap.bitmaps[6] = Cache.system("TileC")
@tilemap.bitmaps[7] = Cache.system("TileD")
@tilemap.bitmaps[8] = Cache.system("TileE")
@tilemap.map_data = $game_map.data
@tilemap.passages = $game_map.passages
end
#--------------------------------------------------------------------------
# * Create Parallax
#--------------------------------------------------------------------------
def create_parallax
if @GroundON
@ground = Plane.new(@viewport1)
@ground.z = 255
@ground.bitmap = Cache.overlay("ground" + $game_map.map_id.to_s)
end
#end HANZO
@parallax = Plane.new(@viewport1)
@parallax.z = -100
end
#--------------------------------------------------------------------------
# * Create Character Sprite
#--------------------------------------------------------------------------
def create_characters
@character_sprites = []
for i in $game_map.events.keys.sort
sprite = Sprite_Character.new(@viewport1, $game_map.events[i])
@character_sprites.push(sprite)
end
for vehicle in $game_map.vehicles
sprite = Sprite_Character.new(@viewport1, vehicle)
@character_sprites.push(sprite)
end
@character_sprites.push(Sprite_Character.new(@viewport1, $game_player))
end
#--------------------------------------------------------------------------
# * Create Airship Shadow Sprite
#--------------------------------------------------------------------------
def create_shadow
@shadow_sprite = Sprite.new(@viewport1)
@shadow_sprite.bitmap = Cache.system("Shadow")
@shadow_sprite.ox = @shadow_sprite.bitmap.width / 2
@shadow_sprite.oy = @shadow_sprite.bitmap.height
@shadow_sprite.z = 180
end
#--------------------------------------------------------------------------
# * Create Weather
#--------------------------------------------------------------------------
def create_weather
@weather = Spriteset_Weather.new(@viewport2)
end
#--------------------------------------------------------------------------
# * Create Picture Sprite
#--------------------------------------------------------------------------
def create_pictures
@picture_sprites = []
for i in 1..20
@picture_sprites.push(Sprite_Picture.new(@viewport2,
$game_map.screen.pictures[i]))
end
end
#--------------------------------------------------------------------------
# * Create Timer Sprite
#--------------------------------------------------------------------------
def create_timer
@timer_sprite = Sprite_Timer.new(@viewport2)
end
#--------------------------------------------------------------------------
# * Dispose
#--------------------------------------------------------------------------
def dispose
dispose_tilemap
dispose_parallax
dispose_characters
dispose_shadow
dispose_weather
dispose_pictures
dispose_timer
dispose_viewports
end
#--------------------------------------------------------------------------
# * Dispose of Tilemap
#--------------------------------------------------------------------------
def dispose_tilemap
@tilemap.dispose
end
#--------------------------------------------------------------------------
# * Dispose of Parallax
#--------------------------------------------------------------------------
def dispose_parallax
if @ground != nil
@ground.dispose
end
if @par != nil
@par.dispose
end
@parallax.dispose
end
#--------------------------------------------------------------------------
# * Dispose of Character Sprite
#--------------------------------------------------------------------------
def dispose_characters
for sprite in @character_sprites
sprite.dispose
end
end
#--------------------------------------------------------------------------
# * Dispose of Airship Shadow Sprite
#--------------------------------------------------------------------------
def dispose_shadow
@shadow_sprite.dispose
end
#--------------------------------------------------------------------------
# * Dispose of Weather
#--------------------------------------------------------------------------
def dispose_weather
@weather.dispose
end
#--------------------------------------------------------------------------
# * Dispose of Picture Sprite
#--------------------------------------------------------------------------
def dispose_pictures
for sprite in @picture_sprites
sprite.dispose
end
end
#--------------------------------------------------------------------------
# * Dispose of Timer Sprite
#--------------------------------------------------------------------------
def dispose_timer
@timer_sprite.dispose
end
#--------------------------------------------------------------------------
# * Dispose of Viewport
#--------------------------------------------------------------------------
def dispose_viewports
@viewport1.dispose
@viewport2.dispose
@viewport3.dispose
end
#--------------------------------------------------------------------------
# * Frame Update
#--------------------------------------------------------------------------
def update
update_tilemap
update_parallax
update_characters
update_shadow
update_weather
update_pictures
update_timer
update_viewports
end
#--------------------------------------------------------------------------
# * Update Tilemap
#--------------------------------------------------------------------------
def update_tilemap
@tilemap.ox = $game_map.display_x / 8
@tilemap.oy = $game_map.display_y / 8
@tilemap.update
end
#--------------------------------------------------------------------------
# * Update Parallax
#--------------------------------------------------------------------------
def update_parallax
#HANZO Ground Overlay
if @ground != nil
@ground.tone = $game_map.screen.tone
if @ground.ox != -$game_map.display_x / 256 or @ground.oy != -$game_map.display_y / 256 or @ground.ox == 0 or @ground.oy == 0
@ground.ox = $game_map.display_x / 8
@ground.oy = $game_map.display_y / 8
end #./
end #./
if @parallax_name != $game_map.parallax_name
@parallax_name = $game_map.parallax_name
if @parallax.bitmap != nil
@parallax.bitmap.dispose
@parallax.bitmap = nil
end
if @parallax_name != ""
@parallax.bitmap = Cache.parallax(@parallax_name)
end
Graphics.frame_reset
end
@parallax.ox = $game_map.calc_parallax_x(@parallax.bitmap)
@parallax.oy = $game_map.calc_parallax_y(@parallax.bitmap)
end
#--------------------------------------------------------------------------
# * Update Character Sprite
#--------------------------------------------------------------------------
def update_characters
for sprite in @character_sprites
sprite.update
end
end
#--------------------------------------------------------------------------
# * Update Airship Shadow Sprite
#--------------------------------------------------------------------------
def update_shadow
airship = $game_map.airship
@shadow_sprite.x = airship.screen_x
@shadow_sprite.y = airship.screen_y + airship.altitude
@shadow_sprite.opacity = airship.altitude * 8
@shadow_sprite.update
end
#--------------------------------------------------------------------------
# * Update Weather
#--------------------------------------------------------------------------
def update_weather
@weather.type = $game_map.screen.weather_type
@weather.max = $game_map.screen.weather_max
@weather.ox = $game_map.display_x / 8
@weather.oy = $game_map.display_y / 8
@weather.update
end
#--------------------------------------------------------------------------
# *Update Picture Sprite
#--------------------------------------------------------------------------
def update_pictures
for sprite in @picture_sprites
sprite.update
end
end
#--------------------------------------------------------------------------
# * Update Timer Sprite
#--------------------------------------------------------------------------
def update_timer
@timer_sprite.update
end
#--------------------------------------------------------------------------
# * Update Viewport
#--------------------------------------------------------------------------
def update_viewports
@viewport1.tone = $game_map.screen.tone
@viewport1.ox = $game_map.screen.shake
@viewport2.color = $game_map.screen.flash_color
@viewport3.color.set(0, 0, 0, 255 - $game_map.screen.brightness)
@viewport1.update
@viewport2.update
@viewport3.update
end
end

复制代码

脚本二：

####################################################################
# AutoLight v3.7
# By: SojaBird
# Site: [url]http://www.nestcast.blogspot.com[/url]
# Discription: AutoLight is based on selfmade pictures wich represent the lights
# and shadows of every map. AutoLight also has a spot-mode wich
# causes to show a spot over the players position so that only
# close serounding area is enlighted.
####################################################################
=begin
#####
-------------------------
How to call script?
-------------------------
1)
First of all, when you're going to changes something of AutoLight by calling
the script, you have to get rid of the old pictures. To do this call the next
script first;
$AutoLight.dispose
Now you can change any value from the setup below by calling the script;
SojaBird_AL::X
X is the option you want to changes.
After you've done made all the changes you wanted, call the script to draw the
pictures again;
$AutoLight.paint
~EXAMPLE 1~
So I want to changes the name of my pictures I'm using for the lights from
"Light" to "Light2". Also I want to get rid of the shadows. My call script
event should look like this;
$AutoLight.dispose
SojaBird_AL::LightMap = "Light2"
SojaBird_AL::UseShadow = false
$AutoLight.paint
~END 1~
2)
A little harder is it, when you want to add a certain amount. What you must do
is call the script;
@temp = SojaBird_AL::X
SojaBird_AL::X = @temp + Y
X is the option you want to changes.
Y is the amount you want to add.
The same script is used for subtract, multiply, divide and all other
mathematical calculations.
(!Tip: Insted of '@temp', you can use whatever text as long as it has '@'
infront of it.)
~EXAMPLE 2~
This time I want to push up the opacity of my lights with, say like 5
everytime the script is called. I also want the shadows to decrease with 3.
My call script event should look like this;
$AutoLight.dispose
@temp = SojaBird_AL::LightOpacity
SojaBird_AL::LightOpacity = @temp + 5
@temp = SojaBird_AL::ShadowOpacity
SojaBird_AL::ShadowOpacity = @temp - 3
$AutoLight.paint
~END 2~
3)
To use variables as a value for sertain options from AutoLight, you'll have to
use the next script;
SojaBird_AL::X = $game_variables[Z]
X is the option you want to changes.
Z is the variable number.
~EXAMPLE 3~
I want to make a variable lightsource so that the player can change the
values to his/her desire. To realize this, the opacity of the lights need to
be set by a variable. I'll use 1. The call script event should look like this;
$AutoLight.dispose
SojaBird_AL::LightOpacity = $game_variables[1]
$AutoLight.paint
~END 3~
4)
Now if I want to add a variable to a sertain fixed amount, I have to use points
2 and 3 together. The script that must be used is this;
@temp = SojaBird_AL::X
SojaBird_AL::X = @temp + $game_variables[Z]
X is the option you want to changes.
Z is the variable number.
The same script is used for subtract, multiply, divide and all other
mathematical calculations.
(!Tip: Insted of '@temp', you can use whatever text as long as it has '@'
infront of it.)
~EXAMPLE 4~
The flicker of my spot needs to be adjustable by the player. Though, I don't
want the player to be able to turn it of by set the value of the flicker to 1
or less. To ensure this, I'll set the flicker in the setup to 5 so that it
standard flickers 5 pixels. Now the player can add extra flicker to the spot
by useing setting the variable number 2. My call script event looks like this;
$AutoLight.dispose
@temp = SojaBird_AL::SpotFlicker
SojaBird_AL::SpotFlicker = @temp + $game_variables[2]
$AutoLight.paint
~END 4~
5)
>>> MORE TO COME SOON <<<
#####
=end
####################################################################
# Start Setup
####################################################################
module SojaBird_AL
Mode = 1 # The mode that autolight uses (Light/Shadow=1, Spot=2, 3=Both, 0=Nothing).
PictureFormat = "png" # The fileformat of the pictures. Eg. "jpg" or "png" ("...").
### WHEN MODE = 1 or 3 ###
LightSwitch = 1 # Number of the switch to show/hide the lightpicture.
ShadowSwitch = 1 # Number of the switch to show/hide the shadowpicture.
ParSwitch = 1
GroundSwitch = 1
LightOpacity = 115 # Opacity of the lightpictures (0-255).
ShadowOpacity = 145 # Opacity of the shadowpictures (0-255).
ParOpacity = 255
GroundOpacity = 255
UseLight = true # Wheter or not to use a lightmaps (true/false).
UseShadow = true # Wheter or not tu se shadowmaps (true/false).
UsePar = true
UseGround = true
LightMap = "Light" # The name of the files with the lights ("...").
ShadowMap = "Shadow" # The name of the files with the shadows ("...").
ParMap = "Par"
GroundMap = "Ground"
LightBlend = 1 # Blending of the lightpicture (0=Normal, 1=More, 2=Less).
ShadowBlend = 2 #Blending of the shadowpicture (0=Normal, 1=More, 2=Less).
ParBlend = 0
GroundBlend = 0
LightFlicker = 1 # Amount of flicker the lights have (<2=No flicker, >1=Flicker).
ShadowFlicker = 0 # Amount of flicker the shadows have (<2=No flicker, >1=Flicker).
# The light- and shadowmaps need to have the map ID at the end of the by you
# choosen name!
### WHEN MODE = 2 or 3 ###
SpotSwitch = 1 # Number of the swtich to show/hide the spotpicture.
SpotOpacity = 255 # Opacity of the spotpicture (value=0-255).
SpotMap = "Spot" # Name of the file with the spot ("...").
SpotBlend = 2 # Blending of the spotpicture (0=Normal, 1=More, 2=Less).
SpotFlicker = 2 # Amount of flicker the spot has (<2=No flicker, >1=Flicker).
# The spotpicture should have the size of 1088*832!
end
####################################################################
# End Setup
####################################################################
##############################
if SojaBird_AL::Mode != 0
class Scene_Map < Scene_Base
alias al_start start
##############################
def start
al_start
$AutoLight = AutoLight.new
end
###############
def terminate
super
if $scene.is_a?(Scene_Battle)
@spriteset.dispose_characters
end
snapshot_for_background
@spriteset.dispose
@message_window.dispose
$AutoLight.dispose
if $scene.is_a?(Scene_Battle)
perform_battle_transition
end
end
###############
def update
super
$game_map.interpreter.update
$game_map.update
$game_player.update
$game_system.update
@spriteset.update
@message_window.update
$AutoLight.update
unless $game_message.visible
update_transfer_player
update_encounter
update_call_menu
update_call_debug
update_scene_change
end
end
###############
def update_transfer_player
var_ID = 21
case $game_variables[var_ID]
when 1 # Normaln transfer
normal_transfer
when 2 # Fadeless transfer
fadeless_transfer
when 3 # White screen transfer
white_screen_transfer
end
return unless $game_player.transfer?
fade = (Graphics.brightness > 0)
fadeout(30) if fade
@spriteset.dispose
$game_player.perform_transfer
$game_map.autoplay
$game_map.update
Graphics.wait(15)
@spriteset = Spriteset_Map.new
$AutoLight.dispose
$AutoLight = AutoLight.new
fadein(30) if fade
Input.update
end
##############################
end
##############################
############################################################
##############################
class AutoLight
include SojaBird_AL
##############################
def initialize
file_check
paint
end
def file_check
@LightON = FileTest.exist?("Overlays/" + LightMap + $game_map.map_id.to_s + "." + PictureFormat)
@ShadowON = FileTest.exist?("Overlays/" + ShadowMap + $game_map.map_id.to_s + "." + PictureFormat)
@SpotON = FileTest.exist?("Overlays/" + SpotMap + "." + PictureFormat)
@ParON = FileTest.exist?("Overlays/" + ParMap + $game_map.map_id.to_s + ".png")
end
def paint
case Mode
when 1, 3
if @LightON
if UseLight == true
@light_viewport = Viewport.new(0, 0, 800, 480)
@light_viewport.z = 9
@light = Sprite.new(@light_viewport)
@light.bitmap = Cache.overlay(LightMap + $game_map.map_id.to_s)
@light.z = 10
@light.opacity = LightOpacity
@light.blend_type = LightBlend
@light.visible = $game_switches[LightSwitch]
end
end
if @ShadowON
if UseShadow == true
@shadow_viewport = Viewport.new(0, 0, 800, 480)
@shadow_viewport.z = 10
@shadow = Sprite.new(@shadow_viewport)
@shadow.bitmap = Cache.overlay(ShadowMap + $game_map.map_id.to_s)
@shadow.z = 9
@shadow.opacity = ShadowOpacity
@shadow.blend_type = ShadowBlend
@shadow.visible = $game_switches[ShadowSwitch]
end
end
if @ParON
if UsePar == true
@par_viewport = Viewport.new(0, 0, 800, 480)
@par_viewport.z = 8
@par = Plane.new(@par_viewport)
@par.z = 8
@par.bitmap = Cache.overlay(ParMap + $game_map.map_id.to_s)
@par.tone = $game_map.screen.tone
@par.opacity = ParOpacity
@par.blend_type = ParBlend
@par.visible = $game_switches[ParSwitch]
end
end
when 2, 3
if @SpotON
@spot_viewport = Viewport.new(0, 0, 800, 480)
@spot = Sprite.new(@spot_viewport)
@spot.bitmap = Cache.picture(SpotMap)
@spot.z = 9
@spot.opacity = SpotOpacity
@spot.blend_type = SpotBlend
@spot.visible = $game_switches[SpotSwitch]
end
end
update
end
###############
def update
case Mode
when 2, 3
if @spot != nil
@spot.visible = $game_switches[SpotSwitch]
@spot.x = ($game_player.real_x / 8) - ($game_map.display_x / 8) - 800 + 16 + rand(SpotFlicker)
@spot.y = ($game_player.real_y / 8) - ($game_map.display_y / 8) - 480 + 16 + rand(SpotFlicker)
end #./
when 1, 3
if @light != nil
@light.visible = $game_switches[LightSwitch]
end #./
if @shadow != nil
@shadow.visible = $game_switches[ShadowSwitch]
end #./
if @par != nil
@par.visible = $game_switches[ParSwitch]
end #./
if @ground != nil
@ground.visible = $game_switches[GroundSwitch]
end #./
if @light != nil
@light.tone = $game_map.screen.tone
if @light.x != $game_map.display_x / 256 or @light.y != $game_map.display_y / 256 or @light.x == 0 or @light.y == 0
@light.ox = $game_map.display_x / 8 + rand(LightFlicker)
@light.oy = $game_map.display_y / 8 + rand(LightFlicker)
end #./
end #./
if @shadow != nil
@shadow.tone = $game_map.screen.tone
if @shadow.x != $game_map.display_x / 256 or @shadow.y != $game_map.display_y / 256 or @shadow.x == 0 or @shadow.y == 0
@shadow.ox = $game_map.display_x / 8 + rand(ShadowFlicker)
@shadow.oy = $game_map.display_y / 8 + rand(ShadowFlicker)
end #./
end #./
if @par != nil
@par.tone = $game_map.screen.tone
if @par.ox != $game_map.display_x / 256 or @par.oy != $game_map.display_y / 256 or @par.ox == 0 or @par.oy == 0
@par.ox = $game_map.display_x / 8
@par.oy = $game_map.display_y / 8
end #./
end #./
end #case end
end #def end
###############
def dispose
case Mode
when 1, 3
if @light != nil
@light_viewport.dispose
@light.dispose
end
if @shadow != nil
@shadow_viewport.dispose
@shadow.dispose
end
if @par != nil
@par_viewport.dispose
@par.dispose
end
when 2, 3
if @spot != nil
@spot_viewport.dispose
@spot.dispose
end
end
end
##############################
end
end
##############################

复制代码

使用方法：在工程文件夹中新建一个名为“Overlays”的文件夹。其中装的是LZ你需要的两种图片。其一是优先度在角色上方的，例如：

我将此图片命名为par25,意思是这张图片会在ID为25的地图中以优先度在角色上方出现。
其二是：图片略，我目前还不需要，所以没有做。命名格式为groundXX，作为优先度在角色下方的图片。其中XX与之前的25同义。
PS:想要做出华丽效果的地图，那么心血无疑是要花费很多的。LZ自己考虑得失哈。对了，par类型图片要产生效果需要打开一号开关。
效果游戏开始前一号开关就打开的话，按下面图片添加一句代码：

。前提是你没有使用美化标题类的脚本。��