怎么加入第五个装备栏？

136146584

武器，衣甲，护腕，宠物，饰品，该怎么弄？如果需要脚本请贴出脚本，感激不尽！

136146584

那啥，输错啦，是第六个

烛龙之殇

用这个就行了，按照说明设置

1. 
   
2. #==============================================================================
   
3. # 此脚本来自 www.66rpg.com
   
4. #------------------------------------------------------------------------------
   
5. # 　功能：[RMVA]增加装备栏数量
   
6. # 　作者：后知后觉（[email protected]）
   
7. # 　版本：v1.1 2012-02-20
   
8. # 　使用说明：
   
9. #       1.在下面设置需要增加的数量以及增加部位的名字
   
10. #       2.在数据库-护甲-备注 里写入 @etype[位置编号]
    
11. #         默认系统一共有5个装备位置.占用了0~4号
    
12. #         所以扩展出来的装备栏位置编号是从 5 开始.比如 @etype[5]  @etype[6]
    
13. #       3.在扩展位置上给角色设置初始装备的方法
    
14. #         在 数据库-角色-备注 里写入 @add_equips[装备1ID,装备2ID.....]
    
15. #         每个ID中间由半角的 , 分开 比如 @add_equips[61] @add_equips[61,63]
    
16. #       4.设置 固定装备 的初始值
    
17. #         在 数据库-角色-备注 里写入 @fix_equips[装备位置编号,装备位置编号......]
    
18. #         每个编号间由半角的 , 分开 比如 @fix_equips[5] @fix_equips[5,6]
    
19. #       5.设置 禁用装备 的初始值
    
20. #         在 数据库-角色-备注 里写入 @seal_equips[装备位置编号,装备位置编号......]
    
21. #         每个编号间由半角的 , 分开 比如 @seal_equips[5] @seal_equips[5,6]
    
22. #       6.游戏运行时可以使用：
    
23. #           $game_actors[角色ID].fix_equips  来获取该角色被固定装备位置的数组
    
24. #           $game_actors[角色ID].seal_equips 来获取该角色被禁用装备位置的数组
    
25. #         然后可以使用数组类的 delete 和 push 方法来删除/增加 etype_id
    
26. #         来达到解除与启用 固定、禁用的效果
    
27. #         比如 $game_actors[1].fix_equips.delete(5) 解除1号角色5号位置的固定
    
28. #              $game_actors[2].seal_equips.push(6) 2号角色禁用6号装备位置
    
29. # 　注意事项：
    
30. #       1.上面说的设置初始装备、固定装备、禁用装备都是只针对新扩展部位的
    
31. #         默认的前5个装备位置的固定、禁用、设置初始.还请使用RMVA默认方式设置
    
32. #       2.状态画面的描绘装备部分.在默认分辨率下.只能描绘6个装备.
    
33. #         我小改了一下.但还是觉得不怎么好看.建议你自己重新描绘那一块...
    
34. #==============================================================================
    
35. module HzhjEquip
    
36.   # 设置要增加的装备部位数量
    
37.   ETYPE_ADD_NUM = 1
    
38.   # 设置要增加的装备部位的名字
    
39.   ETYPE_ADD_NAME = ["绿色刻纹"]
    
40. end
    
41. def Vocab.etype(etype_id)
    
42.   etypes = $data_system.terms.etypes + HzhjEquip::ETYPE_ADD_NAME
    
43.   etypes[etype_id]
    
44. end
    
45. class RPG::Actor < RPG::BaseItem
    
46.   def add_equips
    
47.     if /@add_equips\[(.+?)\]/ =~ @note
    
48.       result = $1.split(/,/).collect{|str|str.to_i}
    
49.       result << 0 while result.size < HzhjEquip::ETYPE_ADD_NUM
    
50.     else
    
51.       result = Array.new(HzhjEquip::ETYPE_ADD_NUM){0}
    
52.     end
    
53.     result
    
54.   end
    
55.   def fix_equips
    
56.     if /@fix_equips\[(.+?)\]/ =~ @note
    
57.       result = $1.split(/,/).collect{|str|str.to_i}
    
58.     else
    
59.       result = []
    
60.     end
    
61.     result
    
62.   end
    
63.   def seal_equips
    
64.     if /@seal_equips\[(.+?)\]/ =~ @note
    
65.       result = $1.split(/,/).collect{|str|str.to_i}
    
66.     else
    
67.       result = []
    
68.     end
    
69.     result
    
70.   end
    
71. end
    
72. class RPG::Armor < RPG::EquipItem
    
73.   def etype_id
    
74.     if /@etype\[(.+?)\]/ =~ @note
    
75.       return $1.to_i
    
76.     else
    
77.       return @etype_id
    
78.     end
    
79.   end
    
80. end
    
81. class Game_Actor < Game_Battler
    
82.   attr_accessor :fix_equips
    
83.   attr_accessor :seal_equips
    
84.   alias hzhj_old_init_equips_game_actor init_equips
    
85.   def init_equips(equips)
    
86.     @fix_equips = actor.fix_equips
    
87.     @seal_equips = actor.seal_equips
    
88.     hzhj_equips = equips.clone
    
89.     add_equips = actor.add_equips
    
90.     HzhjEquip::ETYPE_ADD_NUM.times{hzhj_equips << add_equips.shift}
    
91.     hzhj_old_init_equips_game_actor(hzhj_equips)
    
92.   end
    
93.   alias hzhj_old_equip_slots_game_actor equip_slots
    
94.   def equip_slots
    
95.     result = hzhj_old_equip_slots_game_actor
    
96.     HzhjEquip::ETYPE_ADD_NUM.times{result << result.size}
    
97.     result
    
98.   end
    
99.   def equip_type_fixed?(etype_id)
    
100.     if etype_id > 4
     
101.       return @fix_equips.include?(etype_id)
     
102.     else
     
103.       return super
     
104.     end
     
105.   end
     
106.   def equip_type_sealed?(etype_id)
     
107.     if etype_id > 4
     
108.       return @seal_equips.include?(etype_id)
     
109.     else
     
110.       return super
     
111.     end
     
112.   end
     
113. end
     
114. class Window_EquipSlot < Window_Selectable
     
115.   def actor=(actor)
     
116.     return if @actor == actor
     
117.     @actor = actor
     
118.     create_contents
     
119.     refresh
     
120.   end
     
121. end
     
122. class Window_Status < Window_Selectable
     
123.   def draw_equipments(x, y)
     
124.     x = 224 if @actor.equips.size > 6
     
125.     @actor.equips.each_with_index do |item, i|
     
126.       dx = x + 146 * (i / 6)
     
127.       dy = y + line_height * (i % 6)
     
128.       draw_item_name(item, dx, dy, true, 122)
     
129.     end
     
130.   end
     
131. end
     

复制代码

烛龙之殇

1. 
   
2. #==============================================================================
   
3. # 此脚本来自 www.66rpg.com
   
4. #------------------------------------------------------------------------------
   
5. # 　功能：[RMVA]增加装备栏数量
   
6. # 　作者：后知后觉（[email protected]）
   
7. # 　版本：v1.1 2012-02-20
   
8. # 　使用说明：
   
9. #       1.在下面设置需要增加的数量以及增加部位的名字
   
10. #       2.在数据库-护甲-备注 里写入 @etype[位置编号]
    
11. #         默认系统一共有5个装备位置.占用了0~4号
    
12. #         所以扩展出来的装备栏位置编号是从 5 开始.比如 @etype[5]  @etype[6]
    
13. #       3.在扩展位置上给角色设置初始装备的方法
    
14. #         在 数据库-角色-备注 里写入 @add_equips[装备1ID,装备2ID.....]
    
15. #         每个ID中间由半角的 , 分开 比如 @add_equips[61] @add_equips[61,63]
    
16. #       4.设置 固定装备 的初始值
    
17. #         在 数据库-角色-备注 里写入 @fix_equips[装备位置编号,装备位置编号......]
    
18. #         每个编号间由半角的 , 分开 比如 @fix_equips[5] @fix_equips[5,6]
    
19. #       5.设置 禁用装备 的初始值
    
20. #         在 数据库-角色-备注 里写入 @seal_equips[装备位置编号,装备位置编号......]
    
21. #         每个编号间由半角的 , 分开 比如 @seal_equips[5] @seal_equips[5,6]
    
22. #       6.游戏运行时可以使用：
    
23. #           $game_actors[角色ID].fix_equips  来获取该角色被固定装备位置的数组
    
24. #           $game_actors[角色ID].seal_equips 来获取该角色被禁用装备位置的数组
    
25. #         然后可以使用数组类的 delete 和 push 方法来删除/增加 etype_id
    
26. #         来达到解除与启用 固定、禁用的效果
    
27. #         比如 $game_actors[1].fix_equips.delete(5) 解除1号角色5号位置的固定
    
28. #              $game_actors[2].seal_equips.push(6) 2号角色禁用6号装备位置
    
29. # 　注意事项：
    
30. #       1.上面说的设置初始装备、固定装备、禁用装备都是只针对新扩展部位的
    
31. #         默认的前5个装备位置的固定、禁用、设置初始.还请使用RMVA默认方式设置
    
32. #       2.状态画面的描绘装备部分.在默认分辨率下.只能描绘6个装备.
    
33. #         我小改了一下.但还是觉得不怎么好看.建议你自己重新描绘那一块...
    
34. #==============================================================================
    
35. module HzhjEquip
    
36.   # 设置要增加的装备部位数量
    
37.   ETYPE_ADD_NUM = 1
    
38.   # 设置要增加的装备部位的名字
    
39.   ETYPE_ADD_NAME = ["绿色刻纹"]
    
40. end
    
41. def Vocab.etype(etype_id)
    
42.   etypes = $data_system.terms.etypes + HzhjEquip::ETYPE_ADD_NAME
    
43.   etypes[etype_id]
    
44. end
    
45. class RPG::Actor < RPG::BaseItem
    
46.   def add_equips
    
47.     if /@add_equips\[(.+?)\]/ =~ @note
    
48.       result = $1.split(/,/).collect{|str|str.to_i}
    
49.       result << 0 while result.size < HzhjEquip::ETYPE_ADD_NUM
    
50.     else
    
51.       result = Array.new(HzhjEquip::ETYPE_ADD_NUM){0}
    
52.     end
    
53.     result
    
54.   end
    
55.   def fix_equips
    
56.     if /@fix_equips\[(.+?)\]/ =~ @note
    
57.       result = $1.split(/,/).collect{|str|str.to_i}
    
58.     else
    
59.       result = []
    
60.     end
    
61.     result
    
62.   end
    
63.   def seal_equips
    
64.     if /@seal_equips\[(.+?)\]/ =~ @note
    
65.       result = $1.split(/,/).collect{|str|str.to_i}
    
66.     else
    
67.       result = []
    
68.     end
    
69.     result
    
70.   end
    
71. end
    
72. class RPG::Armor < RPG::EquipItem
    
73.   def etype_id
    
74.     if /@etype\[(.+?)\]/ =~ @note
    
75.       return $1.to_i
    
76.     else
    
77.       return @etype_id
    
78.     end
    
79.   end
    
80. end
    
81. class Game_Actor < Game_Battler
    
82.   attr_accessor :fix_equips
    
83.   attr_accessor :seal_equips
    
84.   alias hzhj_old_init_equips_game_actor init_equips
    
85.   def init_equips(equips)
    
86.     @fix_equips = actor.fix_equips
    
87.     @seal_equips = actor.seal_equips
    
88.     hzhj_equips = equips.clone
    
89.     add_equips = actor.add_equips
    
90.     HzhjEquip::ETYPE_ADD_NUM.times{hzhj_equips << add_equips.shift}
    
91.     hzhj_old_init_equips_game_actor(hzhj_equips)
    
92.   end
    
93.   alias hzhj_old_equip_slots_game_actor equip_slots
    
94.   def equip_slots
    
95.     result = hzhj_old_equip_slots_game_actor
    
96.     HzhjEquip::ETYPE_ADD_NUM.times{result << result.size}
    
97.     result
    
98.   end
    
99.   def equip_type_fixed?(etype_id)
    
100.     if etype_id > 4
     
101.       return @fix_equips.include?(etype_id)
     
102.     else
     
103.       return super
     
104.     end
     
105.   end
     
106.   def equip_type_sealed?(etype_id)
     
107.     if etype_id > 4
     
108.       return @seal_equips.include?(etype_id)
     
109.     else
     
110.       return super
     
111.     end
     
112.   end
     
113. end
     
114. class Window_EquipSlot < Window_Selectable
     
115.   def actor=(actor)
     
116.     return if @actor == actor
     
117.     @actor = actor
     
118.     create_contents
     
119.     refresh
     
120.   end
     
121. end
     
122. class Window_Status < Window_Selectable
     
123.   def draw_equipments(x, y)
     
124.     x = 224 if @actor.equips.size > 6
     
125.     @actor.equips.each_with_index do |item, i|
     
126.       dx = x + 146 * (i / 6)
     
127.       dy = y + line_height * (i % 6)
     
128.       draw_item_name(item, dx, dy, true, 122)
     
129.     end
     
130.   end
     
131. end
     

复制代码

烛龙之殇

用这个吧



#==============================================================================
# 此脚本来自 www.66rpg.com
#------------------------------------------------------------------------------
# 　功能：[RMVA]增加装备栏数量
# 　作者：后知后觉（[email protected]）
# 　版本：v1.1 2012-02-20
# 　使用说明：
#       1.在下面设置需要增加的数量以及增加部位的名字
#       2.在数据库-护甲-备注 里写入 @etype[位置编号]
#         默认系统一共有5个装备位置.占用了0~4号
#         所以扩展出来的装备栏位置编号是从 5 开始.比如 @etype[5]  @etype[6]
#       3.在扩展位置上给角色设置初始装备的方法
#         在 数据库-角色-备注 里写入 @add_equips[装备1ID,装备2ID.....]
#         每个ID中间由半角的 , 分开 比如 @add_equips[61] @add_equips[61,63]
#       4.设置 固定装备 的初始值
#         在 数据库-角色-备注 里写入 @fix_equips[装备位置编号,装备位置编号......]
#         每个编号间由半角的 , 分开 比如 @fix_equips[5] @fix_equips[5,6]
#       5.设置 禁用装备 的初始值
#         在 数据库-角色-备注 里写入 @seal_equips[装备位置编号,装备位置编号......]
#         每个编号间由半角的 , 分开 比如 @seal_equips[5] @seal_equips[5,6]
#       6.游戏运行时可以使用：
#           $game_actors[角色ID].fix_equips  来获取该角色被固定装备位置的数组
#           $game_actors[角色ID].seal_equips 来获取该角色被禁用装备位置的数组
#         然后可以使用数组类的 delete 和 push 方法来删除/增加 etype_id
#         来达到解除与启用 固定、禁用的效果
#         比如 $game_actors[1].fix_equips.delete(5) 解除1号角色5号位置的固定
#              $game_actors[2].seal_equips.push(6) 2号角色禁用6号装备位置
# 　注意事项：
#       1.上面说的设置初始装备、固定装备、禁用装备都是只针对新扩展部位的
#         默认的前5个装备位置的固定、禁用、设置初始.还请使用RMVA默认方式设置
#       2.状态画面的描绘装备部分.在默认分辨率下.只能描绘6个装备.
#         我小改了一下.但还是觉得不怎么好看.建议你自己重新描绘那一块...
#==============================================================================
module HzhjEquip
  # 设置要增加的装备部位数量
  ETYPE_ADD_NUM = 1
  # 设置要增加的装备部位的名字
  ETYPE_ADD_NAME = ["绿色刻纹"]
end
def Vocab.etype(etype_id)
  etypes = $data_system.terms.etypes + HzhjEquip::ETYPE_ADD_NAME
  etypes[etype_id]
end
class RPG::Actor < RPG::BaseItem
  def add_equips
    if /@add_equips\[(.+?)\]/ =~ @note
      result = $1.split(/,/).collect{|str|str.to_i}
      result << 0 while result.size < HzhjEquip::ETYPE_ADD_NUM
    else
      result = Array.new(HzhjEquip::ETYPE_ADD_NUM){0}
    end
    result
  end
  def fix_equips
    if /@fix_equips\[(.+?)\]/ =~ @note
      result = $1.split(/,/).collect{|str|str.to_i}
    else
      result = []
    end
    result
  end
  def seal_equips
    if /@seal_equips\[(.+?)\]/ =~ @note
      result = $1.split(/,/).collect{|str|str.to_i}
    else
      result = []
    end
    result
  end
end
class RPG::Armor < RPG::EquipItem
  def etype_id
    if /@etype\[(.+?)\]/ =~ @note
      return $1.to_i
    else
      return @etype_id
    end
  end
end
class Game_Actor < Game_Battler
  attr_accessor :fix_equips
  attr_accessor :seal_equips
  alias hzhj_old_init_equips_game_actor init_equips
  def init_equips(equips)
    @fix_equips = actor.fix_equips
    @seal_equips = actor.seal_equips
    hzhj_equips = equips.clone
    add_equips = actor.add_equips
    HzhjEquip::ETYPE_ADD_NUM.times{hzhj_equips << add_equips.shift}
    hzhj_old_init_equips_game_actor(hzhj_equips)
  end
  alias hzhj_old_equip_slots_game_actor equip_slots
  def equip_slots
    result = hzhj_old_equip_slots_game_actor
    HzhjEquip::ETYPE_ADD_NUM.times{result << result.size}
    result
  end
  def equip_type_fixed?(etype_id)
    if etype_id > 4
      return @fix_equips.include?(etype_id)
    else
      return super
    end
  end
  def equip_type_sealed?(etype_id)
    if etype_id > 4
      return @seal_equips.include?(etype_id)
    else
      return super
    end
  end
end
class Window_EquipSlot < Window_Selectable
  def actor=(actor)
    return if @actor == actor
    @actor = actor
    create_contents
    refresh
  end
end
class Window_Status < Window_Selectable
  def draw_equipments(x, y)
    x = 224 if @actor.equips.size > 6
    @actor.equips.each_with_index do |item, i|
      dx = x + 146 * (i / 6)
      dy = y + line_height * (i % 6)
      draw_item_name(item, dx, dy, true, 122)
    end
  end
end

烛龙之殇

烛龙之殇 发表于 2016-8-2 23:13
用这个吧

当时发了3遍都显示发送失败啊……

136146584

大哥这是xp的吗？

2357691704

用装备扩展脚本
相关说明

根据防具名后边加分隔符","与数字确定以及追加防具种类，默认追加两种，但完全可以照葫芦画瓢追加更多。
例如盾牌种类的命名方式为:
木盾,0
数字对应防具种类
0： 盾
1： 头部防具
2： 身体防具
3： 装饰品
4： 项链
5： 鞋子
实际应用需要对所有与装备有关的窗口进行调整，其中项链与鞋子的名字没有直接给出，菜单中直接用文本体现。
注：后面不加分隔符分隔符","与数字，防具种类恢复数据库默认类型。

直接插在Main前即可，注意全脚本对相应窗口的菜单进行了美化处理，如果只想要增加防具种类功能只插入脚本1至326行的内容即可。

装备扩展（脚本内容）

RUBY 代码复制

# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#                                防具类追加
#BY:亿万星辰
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
module RPG
  class Armor
    def name
      name = @name.split(/,/)[0]
      return name != nil ? name : ''
    end
    def kind 
      kind  = @name.split(/,/)[1]
      return kind  != nil ? kind.to_i : @kind
    end
  end
end
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#                  Game_Actor添加新的防具ID，并对相关方法修正
#
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
class Game_Actor < Game_Battler
  attr_reader   :armor5_id                # 项链 ID
  attr_reader   :armor6_id                # 鞋 ID
  #--------------------------------------------------------------------------
  # ● 设置
  #     actor_id : 角色 ID
  #--------------------------------------------------------------------------
  alias old_setup setup
  def setup(actor_id)
    old_setup(actor_id)
    @armor5_id = 0
    @armor6_id = 0
    update_auto_state(nil, $data_armors[@armor5_id])
    update_auto_state(nil, $data_armors[@armor6_id])
  end
  #--------------------------------------------------------------------------
  # ● 取得属性修正值
  #     element_id : 属性 ID
  #--------------------------------------------------------------------------
  def element_rate(element_id)
    # 获取对应属性有效度的数值
    table = [0,200,150,100,50,0,-100]
    result = table[$data_classes[@class_id].element_ranks[element_id]]
    # 防具能防御本属性的情况下效果减半
    for i in [@armor1_id, @armor2_id, @armor3_id, @armor4_id, @armor5_id, @armor6_id]
      armor = $data_armors[i]
      if armor != nil and armor.guard_element_set.include?(element_id)
        result /= 2
      end
    end
    # 状态能防御本属性的情况下效果减半
    for i in @states
      if $data_states[i].guard_element_set.include?(element_id)
        result /= 2
      end
    end
    # 过程结束
    return result
  end
  #--------------------------------------------------------------------------
  # ● 判定防御属性
  #     state_id : 属性 ID
  #--------------------------------------------------------------------------
  def state_guard?(state_id)
    for i in [@armor1_id, @armor2_id, @armor3_id, @armor4_id, @armor5_id, @armor6_id]
      armor = $data_armors[i]
      if armor != nil
        if armor.guard_state_set.include?(state_id)
          return true
        end
      end
    end
    return false
  end
  #--------------------------------------------------------------------------
  # ● 获取基本力量
  #--------------------------------------------------------------------------
  def base_str
    n = $data_actors[@actor_id].parameters[2, @level]
    weapon = $data_weapons[@weapon_id]
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    n += weapon != nil ? weapon.str_plus : 0
    n += armor1 != nil ? armor1.str_plus : 0
    n += armor2 != nil ? armor2.str_plus : 0
    n += armor3 != nil ? armor3.str_plus : 0
    n += armor4 != nil ? armor4.str_plus : 0
    n += armor5 != nil ? armor5.str_plus : 0
    n += armor6 != nil ? armor6.str_plus : 0
    return [[n, 1].max, 999].min
  end
  #--------------------------------------------------------------------------
  # ● 获取基本灵巧
  #--------------------------------------------------------------------------
  def base_dex
    n = $data_actors[@actor_id].parameters[3, @level]
    weapon = $data_weapons[@weapon_id]
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    n += weapon != nil ? weapon.dex_plus : 0
    n += armor1 != nil ? armor1.dex_plus : 0
    n += armor2 != nil ? armor2.dex_plus : 0
    n += armor3 != nil ? armor3.dex_plus : 0
    n += armor4 != nil ? armor4.dex_plus : 0
    n += armor5 != nil ? armor5.dex_plus : 0
    n += armor6 != nil ? armor6.dex_plus : 0
    return [[n, 1].max, 999].min
  end
  #--------------------------------------------------------------------------
  # ● 获取基本速度
  #--------------------------------------------------------------------------
  def base_agi
    n = $data_actors[@actor_id].parameters[4, @level]
    weapon = $data_weapons[@weapon_id]
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    n += weapon != nil ? weapon.agi_plus : 0
    n += armor1 != nil ? armor1.agi_plus : 0
    n += armor2 != nil ? armor2.agi_plus : 0
    n += armor3 != nil ? armor3.agi_plus : 0
    n += armor4 != nil ? armor4.agi_plus : 0
    n += armor5 != nil ? armor5.agi_plus : 0
    n += armor6 != nil ? armor6.agi_plus : 0
    return [[n, 1].max, 999].min
  end
  #--------------------------------------------------------------------------
  # ● 获取基本魔力
  #--------------------------------------------------------------------------
  def base_int
    n = $data_actors[@actor_id].parameters[5, @level]
    weapon = $data_weapons[@weapon_id]
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    n += weapon != nil ? weapon.int_plus : 0
    n += armor1 != nil ? armor1.int_plus : 0
    n += armor2 != nil ? armor2.int_plus : 0
    n += armor3 != nil ? armor3.int_plus : 0
    n += armor4 != nil ? armor4.int_plus : 0
    n += armor5 != nil ? armor5.int_plus : 0
    n += armor6 != nil ? armor6.int_plus : 0
    return [[n, 1].max, 999].min
  end
  #--------------------------------------------------------------------------
  # ● 获取基本物理防御
  #--------------------------------------------------------------------------
  def base_pdef
    weapon = $data_weapons[@weapon_id]
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    pdef1 = weapon != nil ? weapon.pdef : 0
    pdef2 = armor1 != nil ? armor1.pdef : 0
    pdef3 = armor2 != nil ? armor2.pdef : 0
    pdef4 = armor3 != nil ? armor3.pdef : 0
    pdef5 = armor4 != nil ? armor4.pdef : 0
    pdef6 = armor5 != nil ? armor5.pdef : 0
    pdef7 = armor6 != nil ? armor6.pdef : 0
    return pdef1 + pdef2 + pdef3 + pdef4 + pdef5 + pdef6 + pdef7
  end
  #--------------------------------------------------------------------------
  # ● 获取基本魔法防御
  #--------------------------------------------------------------------------
  def base_mdef
    weapon = $data_weapons[@weapon_id]
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    mdef1 = weapon != nil ? weapon.mdef : 0
    mdef2 = armor1 != nil ? armor1.mdef : 0
    mdef3 = armor2 != nil ? armor2.mdef : 0
    mdef4 = armor3 != nil ? armor3.mdef : 0
    mdef5 = armor4 != nil ? armor4.mdef : 0
    mdef6 = armor5 != nil ? armor5.mdef : 0
    mdef7 = armor6 != nil ? armor6.mdef : 0
    return mdef1 + mdef2 + mdef3 + mdef4 + mdef5 + mdef6 + mdef7
  end
  #--------------------------------------------------------------------------
  # ● 获取基本回避修正
  #--------------------------------------------------------------------------
  def base_eva
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    eva1 = armor1 != nil ? armor1.eva : 0
    eva2 = armor2 != nil ? armor2.eva : 0
    eva3 = armor3 != nil ? armor3.eva : 0
    eva4 = armor4 != nil ? armor4.eva : 0
    eva5 = armor5 != nil ? armor5.eva : 0
    eva6 = armor6 != nil ? armor6.eva : 0
    return eva1 + eva2 + eva3 + eva4 + eva5 + eva6
  end
  #--------------------------------------------------------------------------
  # ● 装备固定判定
  #     equip_type : 装备类型
  #--------------------------------------------------------------------------
  def equip_fix?(equip_type)
    case equip_type
    when 0  # 武器
      return $data_actors[@actor_id].weapon_fix
    when 1  # 盾
      return $data_actors[@actor_id].armor1_fix
    when 2  # 头
      return $data_actors[@actor_id].armor2_fix
    when 3  # 身体
      return $data_actors[@actor_id].armor3_fix
    when 4  # 装饰品
      return $data_actors[@actor_id].armor4_fix
    end
    return false
  end
  #--------------------------------------------------------------------------
  # ● 变更装备
  #     equip_type : 装备类型
  #     id    : 武器 or 防具 ID  (0 为解除装备)
  #--------------------------------------------------------------------------
  def equip(equip_type, id)
    case equip_type
    when 0  # 武器
      if id == 0 or $game_party.weapon_number(id) > 0
        $game_party.gain_weapon(@weapon_id, 1)
        @weapon_id = id
        $game_party.lose_weapon(id, 1)
      end
    when 1  # 盾
      if id == 0 or $game_party.armor_number(id) > 0
        update_auto_state($data_armors[@armor1_id], $data_armors[id])
        $game_party.gain_armor(@armor1_id, 1)
        @armor1_id = id
        $game_party.lose_armor(id, 1)
      end
    when 2  # 头
      if id == 0 or $game_party.armor_number(id) > 0
        update_auto_state($data_armors[@armor2_id], $data_armors[id])
        $game_party.gain_armor(@armor2_id, 1)
        @armor2_id = id
        $game_party.lose_armor(id, 1)
      end
    when 3  # 身体
      if id == 0 or $game_party.armor_number(id) > 0
        update_auto_state($data_armors[@armor3_id], $data_armors[id])
        $game_party.gain_armor(@armor3_id, 1)
        @armor3_id = id
        $game_party.lose_armor(id, 1)
      end
    when 4  # 装饰品
      if id == 0 or $game_party.armor_number(id) > 0
        update_auto_state($data_armors[@armor4_id], $data_armors[id])
        $game_party.gain_armor(@armor4_id, 1)
        @armor4_id = id
        $game_party.lose_armor(id, 1)
      end
    when 5  # 项链
      if id == 0 or $game_party.armor_number(id) > 0
        update_auto_state($data_armors[@armor5_id], $data_armors[id])
        $game_party.gain_armor(@armor5_id, 1)
        @armor5_id = id
        $game_party.lose_armor(id, 1)
      end
    when 6  # 鞋
      if id == 0 or $game_party.armor_number(id) > 0
        update_auto_state($data_armors[@armor6_id], $data_armors[id])
        $game_party.gain_armor(@armor6_id, 1)
        @armor6_id = id
        $game_party.lose_armor(id, 1)
      end
    end
  end
  #--------------------------------------------------------------------------
  # ● 更改职业 ID
  #     class_id : 新的职业 ID
  #--------------------------------------------------------------------------
  def class_id=(class_id)
    if $data_classes[class_id] != nil
      @class_id = class_id
      # 避开无法装备的物品
      unless equippable?($data_weapons[@weapon_id])
        equip(0, 0)
      end
      unless equippable?($data_armors[@armor1_id])
        equip(1, 0)
      end
      unless equippable?($data_armors[@armor2_id])
        equip(2, 0)
      end
      unless equippable?($data_armors[@armor3_id])
        equip(3, 0)
      end
      unless equippable?($data_armors[@armor4_id])
        equip(4, 0)
      end
      unless equippable?($data_armors[@armor5_id])
        equip(5, 0)
      end
      unless equippable?($data_armors[@armor6_id])
        equip(6, 0)
      end
    end
  end
end
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#              Window_Base美化，增加属性增减颜色，及全能力值描绘
#
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#==============================================================================
# ■ Window_Base
#------------------------------------------------------------------------------
# 　游戏中全部窗口的超级类。
#==============================================================================
 
class Window_Base < Window
  ################## 属性增减颜色 ##############################
  def up_color
    return Color.new(255, 0, 0)
  end
  def down_color
    return Color.new(0, 255, 0)
  end
  #--------------------------------------------------------------------------
  # ● 描绘能力值
  #     actor : 角色
  #     x     : 描画目标 X 坐标
  #     y     : 描画目标 Y 坐标
  #     type  : 能力值种类 (0～6)
  #--------------------------------------------------------------------------
  def draw_actor_parameter(actor, x, y, type)
    case type
    when 0
      parameter_name = $data_system.words.atk
      parameter_value = actor.atk
    when 1
      parameter_name = $data_system.words.pdef
      parameter_value = actor.pdef
    when 2
      parameter_name = $data_system.words.mdef
      parameter_value = actor.mdef
    when 3
      parameter_name = $data_system.words.str
      parameter_value = actor.str
    when 4
      parameter_name = $data_system.words.dex
      parameter_value = actor.dex
    when 5
      parameter_name = $data_system.words.agi
      parameter_value = actor.agi
    when 6
      parameter_name = $data_system.words.int
      parameter_value = actor.int
    when 7
      parameter_name = "回避"
      parameter_value = actor.eva
    end
    self.contents.font.color = system_color
    self.contents.draw_text(x, y, 120, 32, parameter_name)
    self.contents.font.color = normal_color
    self.contents.draw_text(x + 120, y, 36, 32, parameter_value.to_s, 2)
  end
end
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#              装备窗口美化，全能力值描绘并追加新的防具装备栏
#
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#==============================================================================
# ■ Window_EquipRight
#------------------------------------------------------------------------------
# 　装备画面、显示角色现在装备的物品的窗口。
#==============================================================================
 
class Window_EquipRight < Window_Selectable
  #--------------------------------------------------------------------------
  # ● 初始化对像
  #     actor : 角色
  #--------------------------------------------------------------------------
  def initialize(actor)
    super(272, 64, 368, 256)
    self.contents = Bitmap.new(width - 32, height - 32)
    @actor = actor
    refresh
    self.index = 0
  end
  #--------------------------------------------------------------------------
  # ● 刷新
  #--------------------------------------------------------------------------
  def refresh
    self.contents.clear
    [url=home.php?mod=space&uid=2653549]@data[/url] = []
    @data.push($data_weapons[@actor.weapon_id])
    @data.push($data_armors[@actor.armor1_id])
    @data.push($data_armors[@actor.armor2_id])
    @data.push($data_armors[@actor.armor3_id])
    @data.push($data_armors[@actor.armor4_id])
    @data.push($data_armors[@actor.armor5_id])
    @data.push($data_armors[@actor.armor6_id])
    @item_max = @data.size
    self.contents.font.color = system_color
    self.contents.draw_text(4, 32 * 0, 92, 32, $data_system.words.weapon)
    self.contents.draw_text(4, 32 * 1, 92, 32, $data_system.words.armor1)
    self.contents.draw_text(4, 32 * 2, 92, 32, $data_system.words.armor2)
    self.contents.draw_text(4, 32 * 3, 92, 32, $data_system.words.armor3)
    self.contents.draw_text(4, 32 * 4, 92, 32, $data_system.words.armor4)
    self.contents.draw_text(4, 32 * 5, 92, 32, "项链")
    self.contents.draw_text(4, 32 * 6, 92, 32, "鞋")
    draw_item_name(@data[0], 92, 32 * 0)
    draw_item_name(@data[1], 92, 32 * 1)
    draw_item_name(@data[2], 92, 32 * 2)
    draw_item_name(@data[3], 92, 32 * 3)
    draw_item_name(@data[4], 92, 32 * 4)
    draw_item_name(@data[5], 92, 32 * 5)
    draw_item_name(@data[6], 92, 32 * 6)
  end
end
 
#==============================================================================
# ■ Window_EquipLeft
#------------------------------------------------------------------------------
# 　装备画面的、显示角色能力值变化的窗口。
#==============================================================================
 
class Window_EquipLeft < Window_Base
  #--------------------------------------------------------------------------
  # ● 初始化对像
  #     actor : 角色
  #--------------------------------------------------------------------------
  def initialize(actor)
    super(0, 64, 272, 416)
    self.contents = Bitmap.new(width - 32, height - 32)
    @actor = actor
    refresh
  end
  #--------------------------------------------------------------------------
  # ● 刷新
  #--------------------------------------------------------------------------
  def refresh
    self.contents.clear
    draw_actor_name(@actor, 4, 0)
    draw_actor_level(@actor, 4, 32)
 
    draw_actor_parameter(@actor, 4, 64, 0)
    draw_actor_parameter(@actor, 4, 96, 1)
    draw_actor_parameter(@actor, 4, 128, 2)
    draw_actor_parameter(@actor, 4, 160, 7)
    draw_actor_parameter(@actor, 4, 192, 3)
    draw_actor_parameter(@actor, 4, 224, 4)
    draw_actor_parameter(@actor, 4, 256, 5)
    draw_actor_parameter(@actor, 4, 288, 6)
    if @new_atk != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 64, 40, 32, "→", 1)
      self.contents.font.color = @new_atk>@actor.atk ? up_color : down_color
      self.contents.font.color = normal_color if @new_atk == @actor.atk
      self.contents.draw_text(200, 64, 36, 32, @new_atk.to_s, 2)
    end
    if @new_pdef != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 96, 40, 32, "→", 1)
      self.contents.font.color = @new_pdef>@actor.pdef ? up_color : down_color
      self.contents.font.color = normal_color if @new_pdef == @actor.pdef
      self.contents.draw_text(200, 96, 36, 32, @new_pdef.to_s, 2)
    end
    if @new_mdef != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 128, 40, 32, "→", 1)
      self.contents.font.color = @new_mdef>@actor.mdef ? up_color : down_color
      self.contents.font.color = normal_color if @new_mdef == @actor.mdef
      self.contents.draw_text(200, 128, 36, 32, @new_mdef.to_s, 2)
    end
    if @new_eva != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 160, 40, 32, "→", 1)
      self.contents.font.color = @new_eva>@actor.eva ? up_color : down_color
      self.contents.font.color = normal_color if @new_eva == @actor.eva
      self.contents.draw_text(200, 160, 36, 32, @new_eva.to_s, 2)
    end
    if @new_str != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 192, 40, 32, "→", 1)
      self.contents.font.color = @new_str>@actor.str ? up_color : down_color
      self.contents.font.color = normal_color if @new_str == @actor.str
      self.contents.draw_text(200, 192, 36, 32, @new_str.to_s, 2)
    end
    if @new_dex != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 224, 40, 32, "→", 1)
      self.contents.font.color = @new_dex>@actor.dex ? up_color : down_color
      self.contents.font.color = normal_color if @new_dex == @actor.dex
      self.contents.draw_text(200, 224, 36, 32, @new_dex.to_s, 2)
    end
    if @new_agi != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 256, 40, 32, "→", 1)
      self.contents.font.color = @new_agi>@actor.agi ? up_color : down_color
      self.contents.font.color = normal_color if @new_agi == @actor.agi
      self.contents.draw_text(200, 256, 36, 32, @new_agi.to_s, 2)
    end
    if @new_int != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 288, 40, 32, "→", 1)
      self.contents.font.color = @new_int>@actor.int ? up_color : down_color
      self.contents.font.color = normal_color if @new_int == @actor.int
      self.contents.draw_text(200, 288, 36, 32, @new_int.to_s, 2)
    end
  end
  #--------------------------------------------------------------------------
  # ● 变更装备后的能力值设置
  #     new_atk  : 变更装备后的攻击力
  #     new_pdef : 变更装备后的物理防御
  #     new_mdef : 变更装备后的魔法防御
  #--------------------------------------------------------------------------
  def set_new_parameters(new_atk, new_pdef, new_mdef, new_eva, new_str, new_dex, new_agi, new_int)
    if @new_atk != new_atk or @new_pdef !=new_pdef or @new_mdef != new_mdef or @new_eva != new_eva or @new_str != new_str or @new_dex !=new_dex or @new_agi != new_agi or @new_int != new_int
      @new_atk = new_atk
      @new_pdef = new_pdef
      @new_mdef = new_mdef
      @new_eva = new_eva
      @new_str = new_str
      @new_dex = new_dex
      @new_agi = new_agi
      @new_int = new_int
      refresh
    end
  end
end
#==============================================================================
# ■ Window_EquipItem
#------------------------------------------------------------------------------
# 　装备画面、显示浏览变更装备的候补物品的窗口。
#==============================================================================
 
class Window_EquipItem < Window_Selectable
  #--------------------------------------------------------------------------
  # ● 初始化对像
  #     actor      : 角色
  #     equip_type : 装备部位 (0～3)
  #--------------------------------------------------------------------------
  def initialize(actor, equip_type)
    super(272, 320, 368, 160)
    @actor = actor
    @equip_type = equip_type
    @column_max = 1
    refresh
    self.active = false
    self.index = -1
  end
  #--------------------------------------------------------------------------
  # ● 项目的描绘
  #     index : 项目符号
  #--------------------------------------------------------------------------
  def draw_item(index)
    item = @data[index]
    x = 4
    y = index * 32
    case item
    when RPG::Weapon
      number = $game_party.weapon_number(item.id)
    when RPG::Armor
      number = $game_party.armor_number(item.id)
    end
    bitmap = RPG::Cache.icon(item.icon_name)
    self.contents.blt(x, y + 4, bitmap, Rect.new(0, 0, 24, 24))
    self.contents.font.color = normal_color
    self.contents.draw_text(x + 28, y, 212, 32, item.name, 0)
    self.contents.draw_text(x + 240, y, 16, 32, ":", 1)
    self.contents.draw_text(x + 256, y, 24, 32, number.to_s, 2)
  end
end
 
class Scene_Equip
  #--------------------------------------------------------------------------
  # ● 主处理
  #--------------------------------------------------------------------------
  def main
    # 获取角色
    @actor = $game_party.actors[@actor_index]
    # 生成窗口
    @help_window = Window_Help.new
    @left_window = Window_EquipLeft.new(@actor)
    @right_window = Window_EquipRight.new(@actor)
    @item_window1 = Window_EquipItem.new(@actor, 0)
    @item_window2 = Window_EquipItem.new(@actor, 1)
    @item_window3 = Window_EquipItem.new(@actor, 2)
    @item_window4 = Window_EquipItem.new(@actor, 3)
    @item_window5 = Window_EquipItem.new(@actor, 4)
    @item_window6 = Window_EquipItem.new(@actor, 5)
    @item_window7 = Window_EquipItem.new(@actor, 6)
    # 关联帮助窗口
    @right_window.help_window = @help_window
    @item_window1.help_window = @help_window
    @item_window2.help_window = @help_window
    @item_window3.help_window = @help_window
    @item_window4.help_window = @help_window
    @item_window5.help_window = @help_window
    @item_window6.help_window = @help_window
    @item_window7.help_window = @help_window
    # 设置光标位置
    @right_window.index = @equip_index
    refresh
    # 执行过渡
    Graphics.transition
    # 主循环
    loop do
      # 刷新游戏画面
      Graphics.update
      # 刷新输入信息
      Input.update
      # 刷新画面
      update
      # 如果画面切换的话的就中断循环
      if $scene != self
        break
      end
    end
    # 准备过渡
    Graphics.freeze
    # 释放窗口
    @help_window.dispose
    @left_window.dispose
    @right_window.dispose
    @item_window1.dispose
    @item_window2.dispose
    @item_window3.dispose
    @item_window4.dispose
    @item_window5.dispose
    @item_window6.dispose
    @item_window7.dispose
  end
  #--------------------------------------------------------------------------
  # ● 刷新
  #--------------------------------------------------------------------------
  def refresh
    # 设置物品窗口的可视状态
    @item_window1.visible = (@right_window.index == 0)
    @item_window2.visible = (@right_window.index == 1)
    @item_window3.visible = (@right_window.index == 2)
    @item_window4.visible = (@right_window.index == 3)
    @item_window5.visible = (@right_window.index == 4)
    @item_window6.visible = (@right_window.index == 5)
    @item_window7.visible = (@right_window.index == 6)
    # 获取当前装备中的物品
    item1 = @right_window.item
    # 设置当前的物品窗口到 @item_window
    case @right_window.index
    when 0
      @item_window = @item_window1
    when 1
      @item_window = @item_window2
    when 2
      @item_window = @item_window3
    when 3
      @item_window = @item_window4
    when 4
      @item_window = @item_window5
    when 5
      @item_window = @item_window6
    when 6
      @item_window = @item_window7
    end
    # 右窗口被激活的情况下
    if @right_window.active
      # 删除变更装备后的能力
    ###############################################################
      @left_window.set_new_parameters(nil, nil, nil, nil, nil, nil, nil, nil)
    end
    # 物品窗口被激活的情况下
    if @item_window.active
      # 获取现在选中的物品
      item2 = @item_window.item
      # 变更装备
      last_hp = @actor.hp
      last_sp = @actor.sp
      @actor.equip(@right_window.index, item2 == nil ? 0 : item2.id)
    ###############################################################
      # 获取变更装备后的能力值
      new_atk = @actor.atk
      new_pdef = @actor.pdef
      new_mdef = @actor.mdef
      new_eva = @actor.eva
      new_str = @actor.str
      new_dex = @actor.dex
      new_agi = @actor.agi
      new_int = @actor.int
      # 返回到装备
      @actor.equip(@right_window.index, item1 == nil ? 0 : item1.id)
      @actor.hp = last_hp
      @actor.sp = last_sp
      # 描画左窗口
    ###############################################################
      @left_window.set_new_parameters(new_atk, new_pdef, new_mdef, new_eva, new_str, new_dex, new_agi, new_int)
    ###############################################################
    end
  end
end
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#              状态窗口美化，全防具装备栏描绘
#
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#==============================================================================
# ■ Window_Status
#------------------------------------------------------------------------------
# 　显示状态画面、完全规格的状态窗口。
#==============================================================================
 
class Window_Status < Window_Base
  #--------------------------------------------------------------------------
  # ● 刷新
  #--------------------------------------------------------------------------
  def refresh
    self.contents.clear
    draw_actor_graphic(@actor, 40, 112)
    draw_actor_name(@actor, 4, 0)
    draw_actor_class(@actor, 4 + 144, 0)
    draw_actor_level(@actor, 96, 32)
    draw_actor_state(@actor, 96, 64)
    draw_actor_hp(@actor, 96, 112, 172)
    draw_actor_sp(@actor, 96, 144, 172)
    draw_actor_parameter(@actor, 96, 192, 0)
    draw_actor_parameter(@actor, 96, 224, 1)
    draw_actor_parameter(@actor, 96, 256, 2)
    draw_actor_parameter(@actor, 96, 304, 3)
    draw_actor_parameter(@actor, 96, 336, 4)
    draw_actor_parameter(@actor, 96, 368, 5)
    draw_actor_parameter(@actor, 96, 400, 6)
    self.contents.font.color = system_color
    self.contents.draw_text(320, 48, 80, 32, "EXP")
    self.contents.draw_text(320, 80, 80, 32, "NEXT")
    self.contents.font.color = normal_color
    self.contents.draw_text(320 + 80, 48, 84, 32, @actor.exp_s, 2)
    self.contents.draw_text(320 + 80, 80, 84, 32, @actor.next_rest_exp_s, 2)
    self.contents.font.color = system_color
    self.contents.draw_text(320, 160, 96, 32, "装备")
    draw_item_name($data_weapons[@actor.weapon_id], 320 + 16, 208)
    draw_item_name($data_armors[@actor.armor1_id], 320 + 16, 240)
    draw_item_name($data_armors[@actor.armor2_id], 320 + 16, 272)
    draw_item_name($data_armors[@actor.armor3_id], 320 + 16, 304)
    draw_item_name($data_armors[@actor.armor4_id], 320 + 16, 336)
    draw_item_name($data_armors[@actor.armor5_id], 320 + 16, 368)
    draw_item_name($data_armors[@actor.armor6_id], 320 + 16, 400)
  end
  def dummy
    self.contents.font.color = system_color
    self.contents.draw_text(320, 112, 96, 32, $data_system.words.weapon)
    self.contents.draw_text(320, 176, 96, 32, $data_system.words.armor1)
    self.contents.draw_text(320, 240, 96, 32, $data_system.words.armor2)
    self.contents.draw_text(320, 304, 96, 32, $data_system.words.armor3)
    self.contents.draw_text(320, 368, 96, 32, $data_system.words.armor4)
    draw_item_name($data_weapons[@actor.weapon_id], 320 + 24, 144)
    draw_item_name($data_armors[@actor.armor1_id], 320 + 24, 208)
    draw_item_name($data_armors[@actor.armor2_id], 320 + 24, 272)
    draw_item_name($data_armors[@actor.armor3_id], 320 + 24, 336)
    draw_item_name($data_armors[@actor.armor4_id], 320 + 24, 400)
  end
end
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#              商店购买窗口美化，增加对新装备位置的描述
#
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#==============================================================================
# ■ Window_ShopStatus
#------------------------------------------------------------------------------
# 　商店画面、显示物品所持数与角色装备的窗口。
#==============================================================================
 
class Window_ShopStatus < Window_Base
  #--------------------------------------------------------------------------
  # ● 刷新
  #--------------------------------------------------------------------------
  def refresh
    self.contents.clear
    if @item == nil
      return
    end
    case @item
    when RPG::Item
      number = $game_party.item_number(@item.id)
    when RPG::Weapon
      number = $game_party.weapon_number(@item.id)
    when RPG::Armor
      number = $game_party.armor_number(@item.id)
    end
    self.contents.font.color = system_color
    self.contents.draw_text(4, 0, 200, 32, "所持数")
    self.contents.font.color = normal_color
    self.contents.draw_text(204, 0, 32, 32, number.to_s, 2)
    if @item.is_a?(RPG::Item)
      return
    end
    # 添加装备品信息
    for i in 0...$game_party.actors.size
      # 获取角色
      actor = $game_party.actors[i]
      # 可以装备为普通文字颜色、不能装备设置为无效文字颜色
      if actor.equippable?(@item)
        self.contents.font.color = normal_color
      else
        self.contents.font.color = disabled_color
      end
      # 描绘角色名字
      self.contents.draw_text(4, 64 + 64 * i, 120, 32, actor.name)
      # 获取当前的装备品
      if @item.is_a?(RPG::Weapon)
        item1 = $data_weapons[actor.weapon_id]
      elsif @item.kind == 0
        item1 = $data_armors[actor.armor1_id]
      elsif @item.kind == 1
        item1 = $data_armors[actor.armor2_id]
      elsif @item.kind == 2
        item1 = $data_armors[actor.armor3_id]
      elsif @item.kind == 3
        item1 = $data_armors[actor.armor4_id]
      elsif @item.kind == 4
        item1 = $data_armors[actor.armor5_id]
      else# if @item.kind == 5
        item1 = $data_armors[actor.armor6_id]
      end
      # 可以装备的情况
      if actor.equippable?(@item)
        # 武器的情况
        if @item.is_a?(RPG::Weapon)
          atk1 = item1 != nil ? item1.atk : 0
          atk2 = @item != nil ? @item.atk : 0
          change = atk2 - atk1
        end
        # 防具的情况
        if @item.is_a?(RPG::Armor)
          pdef1 = item1 != nil ? item1.pdef : 0
          mdef1 = item1 != nil ? item1.mdef : 0
          pdef2 = @item != nil ? @item.pdef : 0
          mdef2 = @item != nil ? @item.mdef : 0
          change = pdef2 - pdef1 + mdef2 - mdef1
        end
        # 描绘能力值变化
        self.contents.draw_text(124, 64 + 64 * i, 112, 32,
          sprintf("%+d", change), 2)
      end
      # 描绘物品
      if item1 != nil
        x = 4
        y = 64 + 64 * i + 32
        bitmap = RPG::Cache.icon(item1.icon_name)
        opacity = self.contents.font.color == normal_color ? 255 : 128
        self.contents.blt(x, y + 4, bitmap, Rect.new(0, 0, 24, 24), opacity)
        self.contents.draw_text(x + 28, y, 212, 32, item1.name)
      end
    end
  end
end

# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★


#


#                                防具类追加


#BY:亿万星辰


# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★


module RPG


  class Armor


    def name


      name = @name.split(/,/)[0]


      return name != nil ? name : ''


    end


    def kind 


      kind  = @name.split(/,/)[1]


      return kind  != nil ? kind.to_i : @kind


    end


  end


end


# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★


#


#                  Game_Actor添加新的防具ID，并对相关方法修正


#


# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★


class Game_Actor < Game_Battler


  attr_reader   :armor5_id                # 项链 ID


  attr_reader   :armor6_id                # 鞋 ID


  #--------------------------------------------------------------------------


  # ● 设置


  #     actor_id : 角色 ID


  #--------------------------------------------------------------------------


  alias old_setup setup


  def setup(actor_id)


    old_setup(actor_id)


    @armor5_id = 0


    @armor6_id = 0


    update_auto_state(nil, $data_armors[@armor5_id])


    update_auto_state(nil, $data_armors[@armor6_id])


  end


  #--------------------------------------------------------------------------


  # ● 取得属性修正值


  #     element_id : 属性 ID


  #--------------------------------------------------------------------------


  def element_rate(element_id)


    # 获取对应属性有效度的数值


    table = [0,200,150,100,50,0,-100]


    result = table[$data_classes[@class_id].element_ranks[element_id]]


    # 防具能防御本属性的情况下效果减半


    for i in [@armor1_id, @armor2_id, @armor3_id, @armor4_id, @armor5_id, @armor6_id]


      armor = $data_armors[i]


      if armor != nil and armor.guard_element_set.include?(element_id)


        result /= 2


      end


    end


    # 状态能防御本属性的情况下效果减半


    for i in @states


      if $data_states[i].guard_element_set.include?(element_id)


        result /= 2


      end


    end


    # 过程结束


    return result


  end


  #--------------------------------------------------------------------------


  # ● 判定防御属性


  #     state_id : 属性 ID


  #--------------------------------------------------------------------------


  def state_guard?(state_id)


    for i in [@armor1_id, @armor2_id, @armor3_id, @armor4_id, @armor5_id, @armor6_id]


      armor = $data_armors[i]


      if armor != nil


        if armor.guard_state_set.include?(state_id)


          return true


        end


      end


    end


    return false


  end


  #--------------------------------------------------------------------------


  # ● 获取基本力量


  #--------------------------------------------------------------------------


  def base_str


    n = $data_actors[@actor_id].parameters[2, @level]


    weapon = $data_weapons[@weapon_id]


    armor1 = $data_armors[@armor1_id]


    armor2 = $data_armors[@armor2_id]


    armor3 = $data_armors[@armor3_id]


    armor4 = $data_armors[@armor4_id]


    armor5 = $data_armors[@armor5_id]


    armor6 = $data_armors[@armor6_id]


    n += weapon != nil ? weapon.str_plus : 0


    n += armor1 != nil ? armor1.str_plus : 0


    n += armor2 != nil ? armor2.str_plus : 0


    n += armor3 != nil ? armor3.str_plus : 0


    n += armor4 != nil ? armor4.str_plus : 0


    n += armor5 != nil ? armor5.str_plus : 0


    n += armor6 != nil ? armor6.str_plus : 0


    return [[n, 1].max, 999].min


  end


  #--------------------------------------------------------------------------


  # ● 获取基本灵巧


  #--------------------------------------------------------------------------


  def base_dex


    n = $data_actors[@actor_id].parameters[3, @level]


    weapon = $data_weapons[@weapon_id]


    armor1 = $data_armors[@armor1_id]


    armor2 = $data_armors[@armor2_id]


    armor3 = $data_armors[@armor3_id]


    armor4 = $data_armors[@armor4_id]


    armor5 = $data_armors[@armor5_id]


    armor6 = $data_armors[@armor6_id]


    n += weapon != nil ? weapon.dex_plus : 0


    n += armor1 != nil ? armor1.dex_plus : 0


    n += armor2 != nil ? armor2.dex_plus : 0


    n += armor3 != nil ? armor3.dex_plus : 0


    n += armor4 != nil ? armor4.dex_plus : 0


    n += armor5 != nil ? armor5.dex_plus : 0


    n += armor6 != nil ? armor6.dex_plus : 0


    return [[n, 1].max, 999].min


  end


  #--------------------------------------------------------------------------


  # ● 获取基本速度


  #--------------------------------------------------------------------------


  def base_agi


    n = $data_actors[@actor_id].parameters[4, @level]


    weapon = $data_weapons[@weapon_id]


    armor1 = $data_armors[@armor1_id]


    armor2 = $data_armors[@armor2_id]


    armor3 = $data_armors[@armor3_id]


    armor4 = $data_armors[@armor4_id]


    armor5 = $data_armors[@armor5_id]


    armor6 = $data_armors[@armor6_id]


    n += weapon != nil ? weapon.agi_plus : 0


    n += armor1 != nil ? armor1.agi_plus : 0


    n += armor2 != nil ? armor2.agi_plus : 0


    n += armor3 != nil ? armor3.agi_plus : 0


    n += armor4 != nil ? armor4.agi_plus : 0


    n += armor5 != nil ? armor5.agi_plus : 0


    n += armor6 != nil ? armor6.agi_plus : 0


    return [[n, 1].max, 999].min


  end


  #--------------------------------------------------------------------------


  # ● 获取基本魔力


  #--------------------------------------------------------------------------


  def base_int


    n = $data_actors[@actor_id].parameters[5, @level]


    weapon = $data_weapons[@weapon_id]


    armor1 = $data_armors[@armor1_id]


    armor2 = $data_armors[@armor2_id]


    armor3 = $data_armors[@armor3_id]


    armor4 = $data_armors[@armor4_id]


    armor5 = $data_armors[@armor5_id]


    armor6 = $data_armors[@armor6_id]


    n += weapon != nil ? weapon.int_plus : 0


    n += armor1 != nil ? armor1.int_plus : 0


    n += armor2 != nil ? armor2.int_plus : 0


    n += armor3 != nil ? armor3.int_plus : 0


    n += armor4 != nil ? armor4.int_plus : 0


    n += armor5 != nil ? armor5.int_plus : 0


    n += armor6 != nil ? armor6.int_plus : 0


    return [[n, 1].max, 999].min


  end


  #--------------------------------------------------------------------------


  # ● 获取基本物理防御


  #--------------------------------------------------------------------------


  def base_pdef


    weapon = $data_weapons[@weapon_id]


    armor1 = $data_armors[@armor1_id]


    armor2 = $data_armors[@armor2_id]


    armor3 = $data_armors[@armor3_id]


    armor4 = $data_armors[@armor4_id]


    armor5 = $data_armors[@armor5_id]


    armor6 = $data_armors[@armor6_id]


    pdef1 = weapon != nil ? weapon.pdef : 0


    pdef2 = armor1 != nil ? armor1.pdef : 0


    pdef3 = armor2 != nil ? armor2.pdef : 0


    pdef4 = armor3 != nil ? armor3.pdef : 0


    pdef5 = armor4 != nil ? armor4.pdef : 0


    pdef6 = armor5 != nil ? armor5.pdef : 0


    pdef7 = armor6 != nil ? armor6.pdef : 0


    return pdef1 + pdef2 + pdef3 + pdef4 + pdef5 + pdef6 + pdef7


  end


  #--------------------------------------------------------------------------


  # ● 获取基本魔法防御


  #--------------------------------------------------------------------------


  def base_mdef


    weapon = $data_weapons[@weapon_id]


    armor1 = $data_armors[@armor1_id]


    armor2 = $data_armors[@armor2_id]


    armor3 = $data_armors[@armor3_id]


    armor4 = $data_armors[@armor4_id]


    armor5 = $data_armors[@armor5_id]


    armor6 = $data_armors[@armor6_id]


    mdef1 = weapon != nil ? weapon.mdef : 0


    mdef2 = armor1 != nil ? armor1.mdef : 0


    mdef3 = armor2 != nil ? armor2.mdef : 0


    mdef4 = armor3 != nil ? armor3.mdef : 0


    mdef5 = armor4 != nil ? armor4.mdef : 0


    mdef6 = armor5 != nil ? armor5.mdef : 0


    mdef7 = armor6 != nil ? armor6.mdef : 0


    return mdef1 + mdef2 + mdef3 + mdef4 + mdef5 + mdef6 + mdef7


  end


  #--------------------------------------------------------------------------


  # ● 获取基本回避修正


  #--------------------------------------------------------------------------


  def base_eva


    armor1 = $data_armors[@armor1_id]


    armor2 = $data_armors[@armor2_id]


    armor3 = $data_armors[@armor3_id]


    armor4 = $data_armors[@armor4_id]


    armor5 = $data_armors[@armor5_id]


    armor6 = $data_armors[@armor6_id]


    eva1 = armor1 != nil ? armor1.eva : 0


    eva2 = armor2 != nil ? armor2.eva : 0


    eva3 = armor3 != nil ? armor3.eva : 0


    eva4 = armor4 != nil ? armor4.eva : 0


    eva5 = armor5 != nil ? armor5.eva : 0


    eva6 = armor6 != nil ? armor6.eva : 0


    return eva1 + eva2 + eva3 + eva4 + eva5 + eva6


  end


  #--------------------------------------------------------------------------


  # ● 装备固定判定


  #     equip_type : 装备类型


  #--------------------------------------------------------------------------


  def equip_fix?(equip_type)


    case equip_type


    when 0  # 武器


      return $data_actors[@actor_id].weapon_fix


    when 1  # 盾


      return $data_actors[@actor_id].armor1_fix


    when 2  # 头


      return $data_actors[@actor_id].armor2_fix


    when 3  # 身体


      return $data_actors[@actor_id].armor3_fix


    when 4  # 装饰品


      return $data_actors[@actor_id].armor4_fix


    end


    return false


  end


  #--------------------------------------------------------------------------


  # ● 变更装备


  #     equip_type : 装备类型


  #     id    : 武器 or 防具 ID  (0 为解除装备)


  #--------------------------------------------------------------------------


  def equip(equip_type, id)


    case equip_type


    when 0  # 武器


      if id == 0 or $game_party.weapon_number(id) > 0


        $game_party.gain_weapon(@weapon_id, 1)


        @weapon_id = id


        $game_party.lose_weapon(id, 1)


      end


    when 1  # 盾


      if id == 0 or $game_party.armor_number(id) > 0


        update_auto_state($data_armors[@armor1_id], $data_armors[id])


        $game_party.gain_armor(@armor1_id, 1)


        @armor1_id = id


        $game_party.lose_armor(id, 1)


      end


    when 2  # 头


      if id == 0 or $game_party.armor_number(id) > 0


        update_auto_state($data_armors[@armor2_id], $data_armors[id])


        $game_party.gain_armor(@armor2_id, 1)


        @armor2_id = id


        $game_party.lose_armor(id, 1)


      end


    when 3  # 身体


      if id == 0 or $game_party.armor_number(id) > 0


        update_auto_state($data_armors[@armor3_id], $data_armors[id])


        $game_party.gain_armor(@armor3_id, 1)


        @armor3_id = id


        $game_party.lose_armor(id, 1)


      end


    when 4  # 装饰品


      if id == 0 or $game_party.armor_number(id) > 0


        update_auto_state($data_armors[@armor4_id], $data_armors[id])


        $game_party.gain_armor(@armor4_id, 1)


        @armor4_id = id


        $game_party.lose_armor(id, 1)


      end


    when 5  # 项链


      if id == 0 or $game_party.armor_number(id) > 0


        update_auto_state($data_armors[@armor5_id], $data_armors[id])


        $game_party.gain_armor(@armor5_id, 1)


        @armor5_id = id


        $game_party.lose_armor(id, 1)


      end


    when 6  # 鞋


      if id == 0 or $game_party.armor_number(id) > 0


        update_auto_state($data_armors[@armor6_id], $data_armors[id])


        $game_party.gain_armor(@armor6_id, 1)


        @armor6_id = id


        $game_party.lose_armor(id, 1)


      end


    end


  end


  #--------------------------------------------------------------------------


  # ● 更改职业 ID


  #     class_id : 新的职业 ID


  #--------------------------------------------------------------------------


  def class_id=(class_id)


    if $data_classes[class_id] != nil


      @class_id = class_id


      # 避开无法装备的物品


      unless equippable?($data_weapons[@weapon_id])


        equip(0, 0)


      end


      unless equippable?($data_armors[@armor1_id])


        equip(1, 0)


      end


      unless equippable?($data_armors[@armor2_id])


        equip(2, 0)


      end


      unless equippable?($data_armors[@armor3_id])


        equip(3, 0)


      end


      unless equippable?($data_armors[@armor4_id])


        equip(4, 0)


      end


      unless equippable?($data_armors[@armor5_id])


        equip(5, 0)


      end


      unless equippable?($data_armors[@armor6_id])


        equip(6, 0)


      end


    end


  end


end


# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★


#


#              Window_Base美化，增加属性增减颜色，及全能力值描绘


#


# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★


#==============================================================================


# ■ Window_Base


#------------------------------------------------------------------------------


# 　游戏中全部窗口的超级类。


#==============================================================================


 


class Window_Base < Window


  ################## 属性增减颜色 ##############################


  def up_color


    return Color.new(255, 0, 0)


  end


  def down_color


    return Color.new(0, 255, 0)


  end


  #--------------------------------------------------------------------------


  # ● 描绘能力值


  #     actor : 角色


  #     x     : 描画目标 X 坐标


  #     y     : 描画目标 Y 坐标


  #     type  : 能力值种类 (0～6)


  #--------------------------------------------------------------------------


  def draw_actor_parameter(actor, x, y, type)


    case type


    when 0


      parameter_name = $data_system.words.atk


      parameter_value = actor.atk


    when 1


      parameter_name = $data_system.words.pdef


      parameter_value = actor.pdef


    when 2


      parameter_name = $data_system.words.mdef


      parameter_value = actor.mdef


    when 3


      parameter_name = $data_system.words.str


      parameter_value = actor.str


    when 4


      parameter_name = $data_system.words.dex


      parameter_value = actor.dex


    when 5


      parameter_name = $data_system.words.agi


      parameter_value = actor.agi


    when 6


      parameter_name = $data_system.words.int


      parameter_value = actor.int


    when 7


      parameter_name = "回避"


      parameter_value = actor.eva


    end


    self.contents.font.color = system_color


    self.contents.draw_text(x, y, 120, 32, parameter_name)


    self.contents.font.color = normal_color


    self.contents.draw_text(x + 120, y, 36, 32, parameter_value.to_s, 2)


  end


end


# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★


#


#              装备窗口美化，全能力值描绘并追加新的防具装备栏


#


# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★


#==============================================================================


# ■ Window_EquipRight


#------------------------------------------------------------------------------


# 　装备画面、显示角色现在装备的物品的窗口。


#==============================================================================


 


class Window_EquipRight < Window_Selectable


  #--------------------------------------------------------------------------


  # ● 初始化对像


  #     actor : 角色


  #--------------------------------------------------------------------------


  def initialize(actor)


    super(272, 64, 368, 256)


    self.contents = Bitmap.new(width - 32, height - 32)


    @actor = actor


    refresh


    self.index = 0


  end


  #--------------------------------------------------------------------------


  # ● 刷新


  #--------------------------------------------------------------------------


  def refresh


    self.contents.clear


    [url=home.php?mod=space&uid=2653549]@data[/url] = []


    @data.push($data_weapons[@actor.weapon_id])


    @data.push($data_armors[@actor.armor1_id])


    @data.push($data_armors[@actor.armor2_id])


    @data.push($data_armors[@actor.armor3_id])


    @data.push($data_armors[@actor.armor4_id])


    @data.push($data_armors[@actor.armor5_id])


    @data.push($data_armors[@actor.armor6_id])


    @item_max = @data.size


    self.contents.font.color = system_color


    self.contents.draw_text(4, 32 * 0, 92, 32, $data_system.words.weapon)


    self.contents.draw_text(4, 32 * 1, 92, 32, $data_system.words.armor1)


    self.contents.draw_text(4, 32 * 2, 92, 32, $data_system.words.armor2)


    self.contents.draw_text(4, 32 * 3, 92, 32, $data_system.words.armor3)


    self.contents.draw_text(4, 32 * 4, 92, 32, $data_system.words.armor4)


    self.contents.draw_text(4, 32 * 5, 92, 32, "项链")


    self.contents.draw_text(4, 32 * 6, 92, 32, "鞋")


    draw_item_name(@data[0], 92, 32 * 0)


    draw_item_name(@data[1], 92, 32 * 1)


    draw_item_name(@data[2], 92, 32 * 2)


    draw_item_name(@data[3], 92, 32 * 3)


    draw_item_name(@data[4], 92, 32 * 4)


    draw_item_name(@data[5], 92, 32 * 5)


    draw_item_name(@data[6], 92, 32 * 6)


  end


end


 


#==============================================================================


# ■ Window_EquipLeft


#------------------------------------------------------------------------------


# 　装备画面的、显示角色能力值变化的窗口。


#==============================================================================


 


class Window_EquipLeft < Window_Base


  #--------------------------------------------------------------------------


  # ● 初始化对像


  #     actor : 角色


  #--------------------------------------------------------------------------


  def initialize(actor)


    super(0, 64, 272, 416)


    self.contents = Bitmap.new(width - 32, height - 32)


    @actor = actor


    refresh


  end


  #--------------------------------------------------------------------------


  # ● 刷新


  #--------------------------------------------------------------------------


  def refresh


    self.contents.clear


    draw_actor_name(@actor, 4, 0)


    draw_actor_level(@actor, 4, 32)


 


    draw_actor_parameter(@actor, 4, 64, 0)


    draw_actor_parameter(@actor, 4, 96, 1)


    draw_actor_parameter(@actor, 4, 128, 2)


    draw_actor_parameter(@actor, 4, 160, 7)


    draw_actor_parameter(@actor, 4, 192, 3)


    draw_actor_parameter(@actor, 4, 224, 4)


    draw_actor_parameter(@actor, 4, 256, 5)


    draw_actor_parameter(@actor, 4, 288, 6)


    if @new_atk != nil


      self.contents.font.color = system_color


      self.contents.draw_text(160, 64, 40, 32, "→", 1)


      self.contents.font.color = @new_atk>@actor.atk ? up_color : down_color


      self.contents.font.color = normal_color if @new_atk == @actor.atk


      self.contents.draw_text(200, 64, 36, 32, @new_atk.to_s, 2)


    end


    if @new_pdef != nil


      self.contents.font.color = system_color


      self.contents.draw_text(160, 96, 40, 32, "→", 1)


      self.contents.font.color = @new_pdef>@actor.pdef ? up_color : down_color


      self.contents.font.color = normal_color if @new_pdef == @actor.pdef


      self.contents.draw_text(200, 96, 36, 32, @new_pdef.to_s, 2)


    end


    if @new_mdef != nil


      self.contents.font.color = system_color


      self.contents.draw_text(160, 128, 40, 32, "→", 1)


      self.contents.font.color = @new_mdef>@actor.mdef ? up_color : down_color


      self.contents.font.color = normal_color if @new_mdef == @actor.mdef


      self.contents.draw_text(200, 128, 36, 32, @new_mdef.to_s, 2)


    end


    if @new_eva != nil


      self.contents.font.color = system_color


      self.contents.draw_text(160, 160, 40, 32, "→", 1)


      self.contents.font.color = @new_eva>@actor.eva ? up_color : down_color


      self.contents.font.color = normal_color if @new_eva == @actor.eva


      self.contents.draw_text(200, 160, 36, 32, @new_eva.to_s, 2)


    end


    if @new_str != nil


      self.contents.font.color = system_color


      self.contents.draw_text(160, 192, 40, 32, "→", 1)


      self.contents.font.color = @new_str>@actor.str ? up_color : down_color


      self.contents.font.color = normal_color if @new_str == @actor.str


      self.contents.draw_text(200, 192, 36, 32, @new_str.to_s, 2)


    end


    if @new_dex != nil


      self.contents.font.color = system_color


      self.contents.draw_text(160, 224, 40, 32, "→", 1)


      self.contents.font.color = @new_dex>@actor.dex ? up_color : down_color


      self.contents.font.color = normal_color if @new_dex == @actor.dex


      self.contents.draw_text(200, 224, 36, 32, @new_dex.to_s, 2)


    end


    if @new_agi != nil


      self.contents.font.color = system_color


      self.contents.draw_text(160, 256, 40, 32, "→", 1)


      self.contents.font.color = @new_agi>@actor.agi ? up_color : down_color


      self.contents.font.color = normal_color if @new_agi == @actor.agi


      self.contents.draw_text(200, 256, 36, 32, @new_agi.to_s, 2)


    end


    if @new_int != nil


      self.contents.font.color = system_color


      self.contents.draw_text(160, 288, 40, 32, "→", 1)


      self.contents.font.color = @new_int>@actor.int ? up_color : down_color


      self.contents.font.color = normal_color if @new_int == @actor.int


      self.contents.draw_text(200, 288, 36, 32, @new_int.to_s, 2)


    end


  end


  #--------------------------------------------------------------------------


  # ● 变更装备后的能力值设置


  #     new_atk  : 变更装备后的攻击力


  #     new_pdef : 变更装备后的物理防御


  #     new_mdef : 变更装备后的魔法防御


  #--------------------------------------------------------------------------


  def set_new_parameters(new_atk, new_pdef, new_mdef, new_eva, new_str, new_dex, new_agi, new_int)


    if @new_atk != new_atk or @new_pdef !=new_pdef or @new_mdef != new_mdef or @new_eva != new_eva or @new_str != new_str or @new_dex !=new_dex or @new_agi != new_agi or @new_int != new_int


      @new_atk = new_atk


      @new_pdef = new_pdef


      @new_mdef = new_mdef


      @new_eva = new_eva


      @new_str = new_str


      @new_dex = new_dex


      @new_agi = new_agi


      @new_int = new_int


      refresh


    end


  end


end


#==============================================================================


# ■ Window_EquipItem


#------------------------------------------------------------------------------


# 　装备画面、显示浏览变更装备的候补物品的窗口。


#==============================================================================


 


class Window_EquipItem < Window_Selectable


  #--------------------------------------------------------------------------


  # ● 初始化对像


  #     actor      : 角色


  #     equip_type : 装备部位 (0～3)


  #--------------------------------------------------------------------------


  def initialize(actor, equip_type)


    super(272, 320, 368, 160)


    @actor = actor


    @equip_type = equip_type


    @column_max = 1


    refresh


    self.active = false


    self.index = -1


  end


  #--------------------------------------------------------------------------


  # ● 项目的描绘


  #     index : 项目符号


  #--------------------------------------------------------------------------


  def draw_item(index)


    item = @data[index]


    x = 4


    y = index * 32


    case item


    when RPG::Weapon


      number = $game_party.weapon_number(item.id)


    when RPG::Armor


      number = $game_party.armor_number(item.id)


    end


    bitmap = RPG::Cache.icon(item.icon_name)


    self.contents.blt(x, y + 4, bitmap, Rect.new(0, 0, 24, 24))


    self.contents.font.color = normal_color


    self.contents.draw_text(x + 28, y, 212, 32, item.name, 0)


    self.contents.draw_text(x + 240, y, 16, 32, ":", 1)


    self.contents.draw_text(x + 256, y, 24, 32, number.to_s, 2)


  end


end


 


class Scene_Equip


  #--------------------------------------------------------------------------


  # ● 主处理


  #--------------------------------------------------------------------------


  def main


    # 获取角色


    @actor = $game_party.actors[@actor_index]


    # 生成窗口


    @help_window = Window_Help.new


    @left_window = Window_EquipLeft.new(@actor)


    @right_window = Window_EquipRight.new(@actor)


    @item_window1 = Window_EquipItem.new(@actor, 0)


    @item_window2 = Window_EquipItem.new(@actor, 1)


    @item_window3 = Window_EquipItem.new(@actor, 2)


    @item_window4 = Window_EquipItem.new(@actor, 3)


    @item_window5 = Window_EquipItem.new(@actor, 4)


    @item_window6 = Window_EquipItem.new(@actor, 5)


    @item_window7 = Window_EquipItem.new(@actor, 6)


    # 关联帮助窗口


    @right_window.help_window = @help_window


    @item_window1.help_window = @help_window


    @item_window2.help_window = @help_window


    @item_window3.help_window = @help_window


    @item_window4.help_window = @help_window


    @item_window5.help_window = @help_window


    @item_window6.help_window = @help_window


    @item_window7.help_window = @help_window


    # 设置光标位置


    @right_window.index = @equip_index


    refresh


    # 执行过渡


    Graphics.transition


    # 主循环


    loop do


      # 刷新游戏画面


      Graphics.update


      # 刷新输入信息


      Input.update


      # 刷新画面


      update


      # 如果画面切换的话的就中断循环


      if $scene != self


        break


      end


    end


    # 准备过渡


    Graphics.freeze


    # 释放窗口


    @help_window.dispose


    @left_window.dispose


    @right_window.dispose


    @item_window1.dispose


    @item_window2.dispose


    @item_window3.dispose


    @item_window4.dispose


    @item_window5.dispose


    @item_window6.dispose


    @item_window7.dispose


  end


  #--------------------------------------------------------------------------


  # ● 刷新


  #--------------------------------------------------------------------------


  def refresh


    # 设置物品窗口的可视状态


    @item_window1.visible = (@right_window.index == 0)


    @item_window2.visible = (@right_window.index == 1)


    @item_window3.visible = (@right_window.index == 2)


    @item_window4.visible = (@right_window.index == 3)


    @item_window5.visible = (@right_window.index == 4)


    @item_window6.visible = (@right_window.index == 5)


    @item_window7.visible = (@right_window.index == 6)


    # 获取当前装备中的物品


    item1 = @right_window.item


    # 设置当前的物品窗口到 @item_window


    case @right_window.index


    when 0


      @item_window = @item_window1


    when 1


      @item_window = @item_window2


    when 2


      @item_window = @item_window3


    when 3


      @item_window = @item_window4


    when 4


      @item_window = @item_window5


    when 5


      @item_window = @item_window6


    when 6


      @item_window = @item_window7


    end


    # 右窗口被激活的情况下


    if @right_window.active


      # 删除变更装备后的能力


    ###############################################################


      @left_window.set_new_parameters(nil, nil, nil, nil, nil, nil, nil, nil)


    end


    # 物品窗口被激活的情况下


    if @item_window.active


      # 获取现在选中的物品


      item2 = @item_window.item


      # 变更装备


      last_hp = @actor.hp


      last_sp = @actor.sp


      @actor.equip(@right_window.index, item2 == nil ? 0 : item2.id)


    ###############################################################


      # 获取变更装备后的能力值


      new_atk = @actor.atk


      new_pdef = @actor.pdef


      new_mdef = @actor.mdef


      new_eva = @actor.eva


      new_str = @actor.str


      new_dex = @actor.dex


      new_agi = @actor.agi


      new_int = @actor.int


      # 返回到装备


      @actor.equip(@right_window.index, item1 == nil ? 0 : item1.id)


      @actor.hp = last_hp


      @actor.sp = last_sp


      # 描画左窗口


    ###############################################################


      @left_window.set_new_parameters(new_atk, new_pdef, new_mdef, new_eva, new_str, new_dex, new_agi, new_int)


    ###############################################################


    end


  end


end


# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★


#


#              状态窗口美化，全防具装备栏描绘


#


# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★


#==============================================================================


# ■ Window_Status


#------------------------------------------------------------------------------


# 　显示状态画面、完全规格的状态窗口。


#==============================================================================


 


class Window_Status < Window_Base


  #--------------------------------------------------------------------------


  # ● 刷新


  #--------------------------------------------------------------------------


  def refresh


    self.contents.clear


    draw_actor_graphic(@actor, 40, 112)


    draw_actor_name(@actor, 4, 0)


    draw_actor_class(@actor, 4 + 144, 0)


    draw_actor_level(@actor, 96, 32)


    draw_actor_state(@actor, 96, 64)


    draw_actor_hp(@actor, 96, 112, 172)


    draw_actor_sp(@actor, 96, 144, 172)


    draw_actor_parameter(@actor, 96, 192, 0)


    draw_actor_parameter(@actor, 96, 224, 1)


    draw_actor_parameter(@actor, 96, 256, 2)


    draw_actor_parameter(@actor, 96, 304, 3)


    draw_actor_parameter(@actor, 96, 336, 4)


    draw_actor_parameter(@actor, 96, 368, 5)


    draw_actor_parameter(@actor, 96, 400, 6)


    self.contents.font.color = system_color


    self.contents.draw_text(320, 48, 80, 32, "EXP")


    self.contents.draw_text(320, 80, 80, 32, "NEXT")


    self.contents.font.color = normal_color


    self.contents.draw_text(320 + 80, 48, 84, 32, @actor.exp_s, 2)


    self.contents.draw_text(320 + 80, 80, 84, 32, @actor.next_rest_exp_s, 2)


    self.contents.font.color = system_color


    self.contents.draw_text(320, 160, 96, 32, "装备")


    draw_item_name($data_weapons[@actor.weapon_id], 320 + 16, 208)


    draw_item_name($data_armors[@actor.armor1_id], 320 + 16, 240)


    draw_item_name($data_armors[@actor.armor2_id], 320 + 16, 272)


    draw_item_name($data_armors[@actor.armor3_id], 320 + 16, 304)


    draw_item_name($data_armors[@actor.armor4_id], 320 + 16, 336)


    draw_item_name($data_armors[@actor.armor5_id], 320 + 16, 368)


    draw_item_name($data_armors[@actor.armor6_id], 320 + 16, 400)


  end


  def dummy


    self.contents.font.color = system_color


    self.contents.draw_text(320, 112, 96, 32, $data_system.words.weapon)


    self.contents.draw_text(320, 176, 96, 32, $data_system.words.armor1)


    self.contents.draw_text(320, 240, 96, 32, $data_system.words.armor2)


    self.contents.draw_text(320, 304, 96, 32, $data_system.words.armor3)


    self.contents.draw_text(320, 368, 96, 32, $data_system.words.armor4)


    draw_item_name($data_weapons[@actor.weapon_id], 320 + 24, 144)


    draw_item_name($data_armors[@actor.armor1_id], 320 + 24, 208)


    draw_item_name($data_armors[@actor.armor2_id], 320 + 24, 272)


    draw_item_name($data_armors[@actor.armor3_id], 320 + 24, 336)


    draw_item_name($data_armors[@actor.armor4_id], 320 + 24, 400)


  end


end


# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★


#


#              商店购买窗口美化，增加对新装备位置的描述


#


# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★


#==============================================================================


# ■ Window_ShopStatus


#------------------------------------------------------------------------------


# 　商店画面、显示物品所持数与角色装备的窗口。


#==============================================================================


 


class Window_ShopStatus < Window_Base


  #--------------------------------------------------------------------------


  # ● 刷新


  #--------------------------------------------------------------------------


  def refresh


    self.contents.clear


    if @item == nil


      return


    end


    case @item


    when RPG::Item


      number = $game_party.item_number(@item.id)


    when RPG::Weapon


      number = $game_party.weapon_number(@item.id)


    when RPG::Armor


      number = $game_party.armor_number(@item.id)


    end


    self.contents.font.color = system_color


    self.contents.draw_text(4, 0, 200, 32, "所持数")


    self.contents.font.color = normal_color


    self.contents.draw_text(204, 0, 32, 32, number.to_s, 2)


    if @item.is_a?(RPG::Item)


      return


    end


    # 添加装备品信息


    for i in 0...$game_party.actors.size


      # 获取角色


      actor = $game_party.actors[i]


      # 可以装备为普通文字颜色、不能装备设置为无效文字颜色


      if actor.equippable?(@item)


        self.contents.font.color = normal_color


      else


        self.contents.font.color = disabled_color


      end


      # 描绘角色名字


      self.contents.draw_text(4, 64 + 64 * i, 120, 32, actor.name)


      # 获取当前的装备品


      if @item.is_a?(RPG::Weapon)


        item1 = $data_weapons[actor.weapon_id]


      elsif @item.kind == 0


        item1 = $data_armors[actor.armor1_id]


      elsif @item.kind == 1


        item1 = $data_armors[actor.armor2_id]


      elsif @item.kind == 2


        item1 = $data_armors[actor.armor3_id]


      elsif @item.kind == 3


        item1 = $data_armors[actor.armor4_id]


      elsif @item.kind == 4


        item1 = $data_armors[actor.armor5_id]


      else# if @item.kind == 5


        item1 = $data_armors[actor.armor6_id]


      end


      # 可以装备的情况


      if actor.equippable?(@item)


        # 武器的情况


        if @item.is_a?(RPG::Weapon)


          atk1 = item1 != nil ? item1.atk : 0


          atk2 = @item != nil ? @item.atk : 0


          change = atk2 - atk1


        end


        # 防具的情况


        if @item.is_a?(RPG::Armor)


          pdef1 = item1 != nil ? item1.pdef : 0


          mdef1 = item1 != nil ? item1.mdef : 0


          pdef2 = @item != nil ? @item.pdef : 0


          mdef2 = @item != nil ? @item.mdef : 0


          change = pdef2 - pdef1 + mdef2 - mdef1


        end


        # 描绘能力值变化


        self.contents.draw_text(124, 64 + 64 * i, 112, 32,


          sprintf("%+d", change), 2)


      end


      # 描绘物品


      if item1 != nil


        x = 4


        y = 64 + 64 * i + 32


        bitmap = RPG::Cache.icon(item1.icon_name)


        opacity = self.contents.font.color == normal_color ? 255 : 128


        self.contents.blt(x, y + 4, bitmap, Rect.new(0, 0, 24, 24), opacity)


        self.contents.draw_text(x + 28, y, 212, 32, item1.name)


      end


    end


  end


end

letppigogo

亿万星辰的这个脚本更靠谱一点，因为防具追加，不单单追加一个装备界面，状态，shop，都要追加。

914893385

大哥，你也用XP啊