Project1

标题: 求一个思路，按下CTRL键的时候可以快速显示对话 [打印本页]

作者: pinko 时间: 2009-8-25 13:14
标题: 求一个思路，按下CTRL键的时候可以快速显示对话
其实就是一般AVG的效果。
但是我用的是FUKI对话框，我希望在按下CTRL的时候，以5倍速度显示文字。
且CTRL只有对话模式时才可以使用。

作者: zhli667 时间: 2009-8-25 13:23
本帖最后由 zhli667 于 2009-8-25 13:36 编辑

"66加强整和对话"有这个功能吧！

#============================================================================
# 66加强对话框Fuki对话框整合+附送功能
# By whbm
#============================================================================

# 说明：#紫千修改
#    这是一个整合了66加强对话框和Fuki对话框功能脚本，你可以靠改变开关来切换
#    两个脚本。

#    附送功能：
#    在对话中按enter键跳过打字效果

# 33号开关控制对话框的切换:
#    打开--使用66加强对话框
#    关闭--使用Fuki对话框
# 34号开关控制附送功能的打开与关闭：
#    打开--使用附送功能
#    关闭--不使用附送功能

34号开关打开时，按回车键可快速显示文字。
#============================================================================
# 66加强对话框Fuki对话框整合+附送功能
# By whbm
#============================================================================

# 说明：#紫千修改
#    这是一个整合了66加强对话框和Fuki对话框功能脚本，你可以靠改变开关来切换
#    两个脚本。

#    附送功能：
#    在对话中按enter键跳过打字效果

# 33号开关控制对话框的切换:
#    打开--使用66加强对话框
#    关闭--使用Fuki对话框
# 34号开关控制附送功能的打开与关闭：
#    打开--使用附送功能
#    关闭--不使用附送功能

#============================================================================
# 66加强对话框说明--66rpg
#============================================================================

#默认为一个字一个字的方式，如果需要一次全部显示，
#请在游戏中使用脚本：$game_system.typing = true

#默认对话字没有声音，如果需要声音，
#请在游戏中使用脚本：$game_system.soundname_on_speak = "这里输入文件名"
#我唯一一个见过“胡乱配音”的游戏是天使帝国2代，该游戏说话的时候每个字符随机发一个外星语音

# 其他在对话中可以使用的功能：

# \n[1]：显示1号角色的姓名

# \name[李逍遥]：显示一个“李逍遥”方框，表示说话人姓名

# \p[1]：对话框出现在1号事件的上方
# \p[0]：主人公上方出现对话框
#——————————————————使用\p功能后可以自动调整对话框大小

# \\：显示"\"这个符号

# \v[1] ：显示变量1

# \v[a1] ：显示防具1

# \v[w1] ：显示武器1

# \v[i1] ：显示物品1

# \v[s1] ：显示特技1

# \c[1-8]：更改颜色

# \g：显示金钱窗口

# \a[SE文件名]：对话的时候播放SE

# \s[1-19]：更改弹字的速度

# \. ：停顿一刹那(1、2帧)
# \| ：停顿片刻(20帧)

# \> ：文字不用打字方式
# \< ：文字使用打字方式

# \! ：等待玩家按回车再继续
# \~ ：文字直接消失

# \I ：下一行从这个位置开始

# \o[123]：文字透明度改为123，模拟将死之人(汗)

# \h[12]：改用12号字

# \b[50]：空50象素

# \K[今天天气不错]：在出现“今天天气不错”这几个字的时候播放$game_system.soundname_on_speak设置的音效

# \L[001]：在左边显示图片“Graphics/battlers/66rpg_001_h.png”
# \R[001]：在右边显示图片“Graphics/battlers/66rpg_001_h.png”

# \Lk：清除左边的图像
# \Rk：清除右边的图像

#============================================================================
# Fuki对话框说明--bbschat
#============================================================================
#
# 呼出对话框　ver. 1.31 By パラ犬（日）
#　　来自 http://rpg.para.s3p.net/
#
#　　汉化修改　66RPG bbschat(2006.1.5)
# 来自
#
# ●准备工作-窗口Skin
#
# 首先，确认自己使用的对话框窗口Skin，（数据库-系统-窗口外观图形）
# 然后根据该窗口Skin制作对话框尾部使用的两个箭头图形
# 尾部箭头图形命名方式：“窗口skin名-top”，“窗口skin名-under”
# 将该图形文件存放在“Graphics/Windowskins”文件夹下。
#
# 本演示游戏内置2套窗口和箭头图形，
# 一套是游戏默认的“001-Blue01”，一套是定制的“fk”
# 玩家可以根据自己的需要参照样本定制自己的呼出对话框窗口Skin。
#
# ●呼出对话框使用方法
#
# 在事件命令行使用［脚本］将事件ID代入［$mes_id］
# 该事件就可以使用呼出对话框了。
# （举例：$mes_id=4）
#
# ID 代入 -1 表示玩家，代入 0 表示事件自身。
# 代入 nil 或者 "" 则返回成通常的信息窗口。
# 对话框的表示位置可以通过事件的“更改文章选项”来设定（上、中、下）。
# 表示位置为“中央”的话，不管事件位置在哪里，对话框都将显示在画面中央。
#
# ●角色名字窗口的使用文字的方法
#
# 在事件命令行使用［脚本］将文字列代入［$mes_name］
# 对话框就会显示角色名字窗口
# （举例：$mes_name="阿尔西斯"）
# 代入 nil 或者 "" 则不显示角色名字窗口。
#
# 以上两个机能是独立的，所以可以单独使用
#
#  　$mes_id=(ID) + $mes_name="名字"  ：呼出对话框显示＋角色名字窗口
#  　$mes_id=(ID) + $mes_name=""    ：呼出对话框显示（没有角色名字）
# 　 $mes_id=nil  + $mes_name="名字"  ：默认信息窗口＋角色名字窗口
# 　 $mes_id=nil  + $mes_name=""    ：默认信息窗口（没有角色名字）
#
# ●角色名字窗口使用角色图片的方法（汉化特别追加功能，原脚本只能使用文字）
#
# 如果能在对应文件夹中找到文件名和角色名字相同的图片，
# 则角色名字窗口显示角色头像图片，角色图片最好能包括角色的名字。
# 默认头像图片保存目录为“Graphics/Heads/”，玩家可自行修改。
#
# 如果不想使用角色名字直接作为头像文件名。
# 可以使用下面在 Game_Temp 类里增加的namebmp属性。
# 重新设定角色名字与文件名的对应关系。
#
# ●信息表示速度的变更方法
#
# 在事件命令行使用［脚本］将数值代入［$mes_speed］
# 速度为 0 即瞬间显示全部信息，数字越大，信息表示速度越慢。
# （举例：$mes_speed=1）
#
# ●其他设置
#
# 请参照下面的注释
#
# 补一句，用脚本chat(id,"名字")就相当于$mes_id=ID;$mes_name="名字"
#==============================================================================

module FUKI

# 头像图片保存目录的设定
HEAD_PIC_DIR = "Graphics/Heads/"

# 是否显示尾部图标
TAIL_SHOW = true

# Skin的设定
# 使用数据库默认窗口Skin情况下这里使用[""]
FUKI_SKIN_NAME = "菜单栏" # 呼出对话框用Skin
NAME_SKIN_NAME = "菜单栏" # 角色名字窗口用Skin

# 字体大小
MES_FONT_SIZE = 22 # 呼出对话框
NAME_FONT_SIZE = 14 # 角色名字窗口

# 字体颜色
#（设定为 Color.new(0, 0, 0, 0) 表示使用普通文字色）
FUKI_COLOR = Color.new(255, 255, 255, 255)  # 呼出对话框
NAME_COLOR = Color.new(255, 255, 255, 255)  # 角色名字窗口

# 窗口透明度
# 如修改窗口透明度请同时修改尾部箭头图形内部的透明度
FUKI_OPACITY = 255 # 呼出对话框
MES_OPACITY = 255    # 默认信息窗口
NAME_OPACITY = 255 # 角色名字窗口

# 角色名字窗口的相对位置
NAME_SHIFT_X = 0    # 横坐标
NAME_SHIFT_Y = 16    # 纵坐标

# 窗口表示时是否根据画面大小自动检查窗口出现的位置，
# 自动改变位置（ true / false ）
# 设置成 true 可能出现箭头图标颠倒的问题 <- bbschat
POS_FIX = false

# 在画面最边缘表示时的稍微挪动
# 使用圆形Skin的角和方框的角重合的情况下为 true
CORNER_SHIFT = false
SHIFT_PIXEL = 4 # true 时挪动的象素

# 角色高度尺寸
CHARACTOR_HEIGHT = 48
# 呼出对话框的相对位置（纵坐标）
POP_SHIFT_TOP = 0       # 表示位置为上的时候
POP_SHIFT_UNDER = 0    # 表示位置为下的时候

# 信息的表示速度（数字越小速度越快，0为瞬间表示）
# 游戏中可随时用数字代入 $mes_speed 来改变消息表示速度。
MES_SPEED = 4

end

#==============================================================================
# 方便用户同时设置2个常用参数而使用的函数
#==============================================================================
def chat(id = 0,name = "")
$mes_id = id
$mes_name = name
end

#==============================================================================
# □ Game_Temp
#==============================================================================

class Game_Temp
attr_accessor  :namebmp             #保存头像图片的Hash表
alias initialize_fuki initialize
def initialize
  initialize_fuki
  # 如果不想使用角色名字直接作为头像文件名
  # 可在这里重新设定角色名字与文件名的对应关系
  @namebmp ={"玩家"=>"001-Player-Face", "维斯特"=>"002-Player-Face"}
end
end
#==============================================================================
# □ Game_System
#==============================================================================
class Game_System
attr_accessor :typing
attr_accessor :soundname_on_speak
alias carol3_ini initialize
def initialize
  carol3_ini
  @typing = true
  @soundname_on_speak = nil
end
end
#==============================================================================
# □ Window_FukiMessage
#==============================================================================

class Window_FukiMessage < Window_Selectable

#--------------------------------------------------------------------------
# ● 初始化状态
#--------------------------------------------------------------------------
def initialize
  super(80, 304, 480, 160)
  self.contents = Bitmap.new(width - 32, height - 32)
  self.visible = false
  self.z = 9998
  @fade_in = false
  @fade_out = false
  @contents_showing = false
  @cursor_width = 0
  self.active = false
  self.index = -1
  #........................................................................
  if $game_system.soundname_on_speak == nil then
$game_system.soundname_on_speak = ""
  end
  @opacity_text_buf = Bitmap.new(32, 32)
  #........................................................................
  @w = 0
  @h = 0
  @wait = 0
  @dx = 0
  @dy = 0
  $mes_speed = FUKI::MES_SPEED
end

#--------------------------------------------------------------------------
# ○ 决定窗口尺寸并生成窗口
#--------------------------------------------------------------------------
def refresh_create
  self.contents.clear
  self.contents.font.color = normal_color
  self.contents.font.size = FUKI::MES_FONT_SIZE
  # 取得窗口尺寸
  get_windowsize
  w = @w + 32 + 8
  h = @h * (self.contents.font.size + 10) + 26
  # 生成呼出窗口
  set_fukidasi(self.x, self.y, w, h)
  # 生成角色名字窗口
  set_namewindow
  # 初始化信息表示使用的变量
  @dx = @dy = 0
  @cursor_width = 0
  @contents_drawing = true
  # 瞬间表示的情况下
  if $mes_speed == 0
# 循环信息描绘处理
while $game_temp.message_text != ""
   draw_massage
end
draw_opt_text
@contents_showing_end = true
@contents_drawing = false
  else
# 一个一个描绘文字
refresh_drawtext
  end
end

#--------------------------------------------------------------------------
# ○ 一个一个描绘文字
#--------------------------------------------------------------------------
def refresh_drawtext
  #........................................................................
  if Input.trigger?(Input::C) and $game_switches[34]
# 循环信息描绘处理
while $game_temp.message_text != ""
   draw_massage
end
draw_opt_text
@contents_showing_end = true
@contents_drawing = false
  end
  #........................................................................
  if $game_temp.message_text != nil
if @wait > 0
   @wait -= 1
elsif @wait == 0
   # 描绘处理
   draw_massage
   @wait = $mes_speed
end
  end
  # 描绘结束
  if $game_temp.message_text == ""
draw_opt_text
@contents_showing_end = true
@contents_drawing = false
  end
end

#--------------------------------------------------------------------------
# ○ 66rpg-refresh
#--------------------------------------------------------------------------
def refresh
# 初期化
self.contents.clear
self.contents.font.color = normal_color
self.contents.font.size = Font.default_size
@x = @y = @max_x = @max_y = @indent = @lines = 0
@left_keep = @right_keep = false
@face_indent = 0
@opacity = 255
@cursor_width = 0
@write_speed = 3
@write_wait = 0
@mid_stop = false
@face_file = nil
@popchar = -2
if $game_temp.choice_start == 0
   @x = 8
end
if $game_temp.message_text != nil
   @now_text = $game_temp.message_text
   #——头像设置
   if (/\\[Ff]\[(.+?)\]/.match(@now_text))!=nil then
   @face_file = $1 + ".png"
   @x = @face_indent = 128
   if FileTest.exist?("Graphics/Pictures/" + $1 + ".png")
      self.contents.blt(16, 16, RPG::Cache.picture(@face_file), Rect.new(0, 0, 96, 96))
   end
   @now_text.gsub!(/\\[Ff]\[(.*?)\]/) { "" }
   end
   #——左半身像设置
   if (/\\[Ll]\[(.+?)\]/.match(@now_text))!=nil then
   @face = "66rpg_" + $1 + "_h.png"
   if $加密 == true
      if @left_picture != nil
         @left_picture.dispose
      end
      @left_picture = Sprite.new
      @left_picture.bitmap = Bitmap.new("Graphics/battlers/#{@face}")
      @left_picture.y = 480-@left_picture.bitmap.height
      @left_picture.x = 0
      @left_picture.mirror = true
      @now_text.gsub!(/\\[Ll]\[(.*?)\]/) { "" }
   else
      if FileTest.exist?("Graphics/battlers/#{@face}")
         if @left_picture != nil
         @left_picture.dispose
         end
         @left_picture = Sprite.new
         @left_picture.bitmap = Bitmap.new("Graphics/battlers/#{@face}")
         @left_picture.y = 480-@left_picture.bitmap.height
         @left_picture.x = 0
         @left_picture.mirror = true
         @now_text.gsub!(/\\[Ll]\[(.*?)\]/) { "" }
      end
   end
   end
   #——右半身像设置
   if (/\\[Rr]\[(.+?)\]/.match(@now_text))!=nil then
   @face = "66rpg_" + $1 + "_h.png"
   if $加密 == true
      if @right_picture != nil
         @right_picture.dispose
      end
      @right_picture = Sprite.new
      @right_picture.bitmap = Bitmap.new("Graphics/battlers/#{@face}")
      @right_picture.y = 480-@right_picture.bitmap.height
      @right_picture.x = 640-@right_picture.bitmap.width
      @now_text.gsub!(/\\[Rr]\[(.*?)\]/) { "" }
   else
      if FileTest.exist?("Graphics/battlers/#{@face}")
         if @right_picture != nil
         @right_picture.dispose
         end
         @right_picture = Sprite.new
         @right_picture.bitmap = Bitmap.new("Graphics/battlers/#{@face}")
         @right_picture.y = 480-@right_picture.bitmap.height
         @right_picture.x = 640-@right_picture.bitmap.width
         @now_text.gsub!(/\\[Rr]\[(.*?)\]/) { "" }
      end
   end
   end
   if (/\\[Rr]k/.match(@now_text)) != nil
   @right_keep = true
   @now_text.sub!(/\\[Rr]k/) { "" }
   end
   if (/\\[Ll]k/.match(@now_text)) != nil
   @left_keep = true
   @now_text.sub!(/\\[Ll]k/) { "" }
   end
   # 显示人物姓名
   name_window_set = false
   if (/\\[Nn]ame\[(.+?)\]/.match(@now_text)) != nil
   name_window_set = true
   name_text = $1
   @now_text.sub!(/\\[Nn]ame\[(.*?)\]/) { "" }
   end

   # 文字位置的判定
   if (/\\[Pp]\[([-1,0-9]+)\]/.match(@now_text))!=nil then
   @popchar = $1.to_i
   if @popchar == -1
      @x = @indent = 48
      @y = 4
   end
   @now_text.gsub!(/\\[Pp]\[([-1,0-9]+)\]/) { "" }
   end

   # 开始
   begin
   last_text = @now_text.clone
   @now_text.gsub!(/\\[Vv]\[([IiWwAaSs]?)([0-9]+)\]/) { convart_value($1, $2.to_i) }
   end until @now_text == last_text
   @now_text.gsub!(/\\[Nn]\[([0-9]+)\]/) do
   $game_actors[$1.to_i] != nil ? $game_actors[$1.to_i].name : ""
end
@now_text.gsub!(/\\\\/) { "\000" }
@now_text.gsub!(/\\[Cc]\[([0-9]+)\]/) { "\001[#{$1}]" }
@now_text.gsub!(/\\[Gg]/) { "\002" }
@now_text.gsub!(/\\[Ss]\[([0-9]+)\]/) { "\003[#{$1}]" }
@now_text.gsub!(/\\[Aa]\[(.*?)\]/) { "\004[#{$1}]" }
@now_text.gsub!(/\\[.]/) { "\005" }
@now_text.gsub!(/\\[|]/) { "\006" }

@now_text.gsub!(/\\[>]/) { "\016" }
@now_text.gsub!(/\\[<]/) { "\017" }
@now_text.gsub!(/\\[!]/) { "\020" }
@now_text.gsub!(/\\[~]/) { "\021" }

@now_text.gsub!(/\\[Ii]/) { "\023" }
@now_text.gsub!(/\\[Oo]\[([0-9]+)\]/) { "\024[#{$1}]" }
@now_text.gsub!(/\\[Hh]\[([0-9]+)\]/) { "\025[#{$1}]" }
@now_text.gsub!(/\\[Bb]\[([0-9]+)\]/) { "\026[#{$1}]" }
@now_text.gsub!(/\\[Kk]\[(.*?)\]/) { "\027[#{$1}]" }
if @popchar >= 0
   @text_save = @now_text.clone
   @max_x = 0
   @max_y = 4
   for i in 0..3
   line = @now_text.split(/\n/)[3-i]
   @max_y -= 1 if line == nil and @max_y <= 4-i
   next if line == nil
   cx = contents.text_size(line).width
   @max_x = cx if cx > @max_x
   end
   self.width = @max_x + 48 + @face_indent
   self.height = (@max_y - 1) * 32 + 64
else
   @max_x = self.width - 32 - @face_indent
end
reset_window
   if name_window_set
   off_x = 13
   off_y = -15
   space = 2
   x = self.x + off_x - space / 2
   y = self.y + off_y - space / 2
   w = self.contents.text_size(name_text).width + 26 + space
   h = 40 + space
   @name_window_frame = Window_Frame.new(x, y, w, h)
   @name_window_frame.z = self.z + 1
   x = self.x + off_x + 4
   y = self.y + off_y
   @name_window_text = Air_Text.new(x+4, y+6, name_text)
   @name_window_text.z = self.z + 2
   end
end
reset_window
if $game_temp.choice_max > 0
   @item_max = $game_temp.choice_max
   self.active = true
   self.index = 0
end
if $game_temp.num_input_variable_id > 0
   digits_max = $game_temp.num_input_digits_max
   number = $game_variables[$game_temp.num_input_variable_id]
   @input_number_window = Window_InputNumber.new(digits_max)
   @input_number_window.number = number
   @input_number_window.x = self.x + 8
   @input_number_window.y = self.y + $game_temp.num_input_start * 32
end
end

#==============================================================================
# ■ Window_Frame (枠だけで中身の無いウィンドウ)
#==============================================================================
class Window_Frame < Window_Base
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(x, y, width, height)
  super(x, y, width, height)
  self.contents = nil
  self.back_opacity = 100
end
#--------------------------------------------------------------------------
# ● 解放
#--------------------------------------------------------------------------
def dispose
  super
end
end

#==============================================================================
# ■ Air_Text (何も無いところに文字描写 = 枠の無い瞬間表示メッセージウィンドウ)
#==============================================================================
class Air_Text < Window_Base
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(x, y, designate_text)
  super(x-6, y-16, 32 + designate_text.size * 12, 56)
  self.opacity = 0
  self.back_opacity = 0
  self.contents = Bitmap.new(self.width - 32, self.height - 32)
  w = self.contents.width
  h = self.contents.height
  self.contents.font.color = Color.new(0,0,0,200)
  self.contents.draw_text(0, 0, w, h, designate_text)
end

#--------------------------------------------------------------------------
# ● 解放
#--------------------------------------------------------------------------
def dispose
self.contents.clear
super
end
end

#--------------------------------------------------------------------------
# ○ 取得窗口尺寸
#--------------------------------------------------------------------------
def get_windowsize
  x = y = 0
  @h = @w = 0
  @cursor_width = 0
  # 有选择项的话，处理字的缩进
  if $game_temp.choice_start == 0
x = 16
  end
  # 有等待显示的文字的情况下
  if $game_temp.message_text != nil
  text = $game_temp.message_text.clone
# 限制文字处理
begin
   last_text = text.clone
   text.gsub!(/\\[Vv]\[([0-9]+)\]/) { $game_variables[$1.to_i] }
end until text == last_text
text.gsub!(/\\[Nn]\[([0-9]+)\]/) do
   $game_actors[$1.to_i] != nil ? $game_actors[$1.to_i].name : ""
end
# 为了方便、将 "\\\\" 变换为 "\000"
text.gsub!(/\\\\/) { "\000" }
# "\\C" 变为 "\001" 、"\\G" 变为 "\002"
text.gsub!(/\\[Cc]\[([0-9]+)\]/) { "\001" }
text.gsub!(/\\[Gg]/) { "\002" }
# c 获取 1 个字 (如果不能取得文字就循环)
while ((c = text.slice!(/./m)) != nil)
   # \\ 的情况下
   if c == "\000"
      # 还原为本来的文字
      c = "\\"
   end
   # \C[n] 或者 \G 的情况下
   if c == "\001" or c == "\002"
      # 下面的文字
      next
   end
   # 另起一行文字的情况下
   if c == "\n"
      # y 累加 1
      y += 1
      # 取得纵横尺寸
      @h = y
      @w = x > @w ? x : @w
      if y >= $game_temp.choice_start
      @w = x + 8 > @w ? x + 8 : @w
      end
      x = 0
      # 移动到选择项的下一行
      if y >= $game_temp.choice_start
      x = 8
      end
      # 下面的文字
      next
   end
   # x 为要描绘文字的宽度加法运算
   x += self.contents.text_size(c).width
end
  end
  # 输入数值的情况
  if $game_temp.num_input_variable_id > 0
digits_max = $game_temp.num_input_digits_max
number = $game_variables[$game_temp.num_input_variable_id]
@h += 1
x = digits_max * self.contents.font.size + 16
@w = x > @w ? x : @w
  end
end

#--------------------------------------------------------------------------
# ○ 描绘信息处理
#--------------------------------------------------------------------------
def draw_massage
  # 有等待显示的文字的情况下
  if $game_temp.message_text != nil
text = $game_temp.message_text
# 限制文字处理
begin
   last_text = text.clone
   text.gsub!(/\\[Vv]\[([0-9]+)\]/) { $game_variables[$1.to_i] }
end until text == last_text
text.gsub!(/\\[Nn]\[([0-9]+)\]/) do
   $game_actors[$1.to_i] != nil ? $game_actors[$1.to_i].name : ""
end
# 为了方便、将 "\\\\" 变换为 "\000"
text.gsub!(/\\\\/) { "\000" }
# "\\C" 变为 "\001"、"\\G" 变为 "\002"
text.gsub!(/\\[Cc]\[([0-9]+)\]/) { "\001[#{$1}]" }
text.gsub!(/\\[Gg]/) { "\002" }
# c 获取 1 个字
if ((c = text.slice!(/./m)) != nil)
   # 选择项的情况
   if @dy >= $game_temp.choice_start
      # 处理字的缩进
      @dx = 8
      # 描绘文字
      self.contents.draw_text(4 + @dx, 32 * @dy, 40, 32, c)
      # x 为要描绘文字宽度的加法运算
      @dx += self.contents.text_size(c).width
      # 循环
      while ((c = text.slice!(/./m)) != "\n")
      # 描绘文字
      self.contents.draw_text(4 + @dx, 32 * @dy, 40, 32, c)
      # x 为要描绘文字宽度的加法运算
      @dx += self.contents.text_size(c).width
      end
      if c == "\n"
      # 更新光标宽度
      @cursor_width = [@cursor_width, @dx].max
      # dy 累加 1
      @dy += 1
      @dx = 0
      end
      return
   end
   # \\ 的情况下
   if c == "\000"
      # 还原为本来的文字
      c = "\\"
   end
   #\C[n] 的情况下
   if c == "\001"
      # 更改文字色
      text.sub!(/\[([0-9]+)\]/, "")
      color = $1.to_i
      if color >= 0 and color <= 7
      self.contents.font.color = text_color(color)
      end
   end
   # \G 的情况下
   if c == "\002"
      # 生成金钱窗口
      if @gold_window == nil
      @gold_window = Window_Gold.new
      @gold_window.x = 560 - @gold_window.width
      if $game_temp.in_battle
         @gold_window.y = 192
      else
         @gold_window.y = self.y >= 128 ? 32 : 384
      end
      @gold_window.opacity = self.opacity
      @gold_window.back_opacity = self.back_opacity
      end
   end
   # 另起一行文字的情况下
   if c == "\n"
      # dy 累加 1
      @dy += 1
      @dx = 0
   end
   # 描绘文字
   self.contents.font.size = FUKI::MES_FONT_SIZE
   font_size = self.contents.font.size
   self.contents.draw_text(4+@dx, (font_size+10)*@dy, font_size, font_size, c)
   # dx 为要描绘文字的宽度加法运算
   @dx += self.contents.text_size(c).width
end
  end
end

#--------------------------------------------------------------------------
# ○ 选择项和输入数值的情况下
#--------------------------------------------------------------------------
def draw_opt_text
  # 选择项的情况下
  if $game_temp.choice_max > 0
@item_max = $game_temp.choice_max
self.active = true
self.index = 0
  end
  # 输入数值的情况下
  if $game_temp.num_input_variable_id > 0
digits_max = $game_temp.num_input_digits_max
number = $game_variables[$game_temp.num_input_variable_id]
@input_number_window = Window_InputNumber.new(digits_max)
@input_number_window.number = number
@input_number_window.x = self.x + 8
@input_number_window.y = self.y + $game_temp.num_input_start * 32
  end
end

#--------------------------------------------------------------------------
# ○ 设置呼出对话框
#--------------------------------------------------------------------------
def set_fukidasi(x, y, width, height)
  # $mes_id 为空的时候，不显示呼出对话框
  if $mes_id == nil or $mes_id == ""
del_fukidasi
reset_window
  else
# 不显示暂停标志
self.pause = false
# 取得对话框位置
pos = get_fuki_pos(width, height)
x = pos[0]
y = pos[1]
skin = FUKI::FUKI_SKIN_NAME != "" ? FUKI::FUKI_SKIN_NAME : $game_system.windowskin_name
# 生成呼出对话框
self.windowskin = RPG::Cache.windowskin(skin)
self.x = x
self.y = y
self.height = height
self.width = width
self.contents.dispose
self.contents = Bitmap.new(width - 32, height - 32)
self.back_opacity = FUKI::FUKI_OPACITY
self.contents.clear
self.contents.font.color = normal_color
self.contents.font.size = FUKI::MES_FONT_SIZE
# 描绘尾部图标
if $game_system.message_frame == 0
   # 取得位置
   tale_pos = get_tale_pos
   @tale = Sprite.new
   # 是否显示尾部图标 <- bbschat
   if FUKI::TAIL_SHOW == true
      case @message_position
      when 0  # 上
         @tale.bitmap = RPG::Cache.windowskin(skin + "-top")
         @tale.x = tale_pos[0]
         @tale.y = tale_pos[1]
         @tale.z = self.z + 1
      when 1  # 中
         @tale.dispose
         @tale = nil
      when 2  # 下
         @tale.bitmap = RPG::Cache.windowskin(skin + "-under")
         @tale.x = tale_pos[0]
         @tale.y = tale_pos[1]
         @tale.z = self.z + 1
      end
   end
end
  end
end

#--------------------------------------------------------------------------
# ○ 计算呼出对话框的位置
#--------------------------------------------------------------------------
def get_fuki_pos(width, height)

  # 取得角色
  @character = get_character($mes_id)
  if @character == nil
# 角色不存在的情况下使用默认信息框
del_fukidasi
reset_window
return
  end
  # 处理坐标
  x = ( @character.real_x - $game_map.display_x + 64 ) * 32 / 128 - (width / 2)
  # 为尽量显示在画面内而移动横坐标
  if x + width > 640
x = 640 - width
  elsif x < 0
x = 0
  end
  # 决定窗口位置
  case $game_system.message_position
when 0  # 上
   y = (@character.real_y - $game_map.display_y + 64) * 32 / 128 - height - FUKI::CHARACTOR_HEIGHT + FUKI::POP_SHIFT_TOP
when 1  # 中
   y = (480 - height) / 2
   x = (640 - width) / 2
when 2  # 下
   y =  (@character.real_y - $game_map.display_y + 64) * 32 / 128 + 32 + FUKI::POP_SHIFT_UNDER
  end
  # 纪录文章显示位置
  @message_position = $game_system.message_position
  # 如果选择自动修正，则如果文章会显示到画面外则自动改变窗口的尺寸（高度）
  if FUKI::POS_FIX
case @message_position
   when 0  # 上
      if y <= 0
      @message_position = 2
      y =  (@character.real_y - $game_map.display_y + 64) * 32 / 128 + 32 + FUKI::POP_SHIFT_UNDER
      end
   when 2  # 下
      if y + height >= 480
      p "上"
      @message_position = 0
      y = (@character.real_y - $game_map.display_y + 64) * 32 / 128 - height - FUKI::CHARACTOR_HEIGHT + FUKI::POP_SHIFT_TOP
      end
end
  end
  return [x,y]

end

#--------------------------------------------------------------------------
# ○ 计算尾部图标的位置
#--------------------------------------------------------------------------
def get_tale_pos
  case @message_position
when 0  # 上
   # 处理坐标
   x = ( @character.real_x - $game_map.display_x + 64 ) * 32 / 128 - 16
   # 画面边缘的话则移动位置
   if FUKI::CORNER_SHIFT
      if x == 0
      x = FUKI::SHIFT_PIXEL
      elsif x == 640 - 32
      x = 640 - 32 - FUKI::SHIFT_PIXEL
      end
   end
   y = self.y + self.height - 16
when 1  # 中
   x = nil
   y = nil
when 2  # 下
   # 处理坐标
   x = ( @character.real_x - $game_map.display_x + 64 ) * 32 / 128 - 16
   # 画面边缘的话则移动位置
   if FUKI::CORNER_SHIFT
      if x == 0
      x = FUKI::SHIFT_PIXEL
      elsif @tale.x == 640 - 32
      x = 640 - 32 - FUKI::SHIFT_PIXEL
      end
   end
   y = self.y - 16
  end
  return [x,y]
end

#--------------------------------------------------------------------------
# ○ 计算名字窗口的位置
#--------------------------------------------------------------------------
def get_name_pos
  case @face_pic_txt
when 0  # 文字
   x = self.x + FUKI::NAME_SHIFT_X
   y = self.y - FUKI::NAME_FONT_SIZE - 16 + FUKI::NAME_SHIFT_Y
when 1  # 图片
   if self.x >= @pic_width + 5
      # 默认头像显示在对话框左边
      x = self.x-@pic_width-5
   else
      # 对话框左边放不下时头像显示在右边
      x = self.x + self.width
   end
   y = self.y+self.height/2 - (@pic_height + 5)/2
end

  return [x,y]
end
#--------------------------------------------------------------------------
# ○ 设置角色名字窗口
#--------------------------------------------------------------------------
def set_namewindow

  # $mes_name为空时不显示角色名字窗口
  if $mes_name == nil or $mes_name == ""
return
  else
# 设定变量
mes_name = $mes_name
skin = FUKI::NAME_SKIN_NAME != "" ? FUKI::NAME_SKIN_NAME : $game_system.windowskin_name

#判断名称是否有对应的图片"Graphics/heads/" +
if $game_temp.namebmp[mes_name] == nil then
   sFile = "Graphics/heads/" + mes_name + ".png"
else
   sFile = "Graphics/heads/" + $game_temp.namebmp[mes_name] + ".png"
end

if FileTest.exist?(sFile) == true then

   @face_pic_txt = 1                      #名字窗口使用头像<- bbschat

   # 生成头像
   bmp = Bitmap.new(sFile)
   @pic_width = bmp.width
   @pic_height = bmp.height

   if self.x >= @pic_width + 5
      # 默认头像显示在对话框左边
      name_x = self.x-@pic_width-5
   else
      # 对话框左边放不下时头像显示在右边
      name_x = self.x + self.width
   end
   name_y = self.y+self.height/2 - (@pic_height + 5)/2

   # 生成角色头像窗口
   @name_win = Window_Base.new(name_x, name_y, @pic_width + 5, @pic_height + 5)
   @name_win.windowskin = RPG::Cache.windowskin(skin)
   @name_win.back_opacity =0
   @name_win.z = self.z + 1

   @name_contents = Sprite.new
   @name_contents.x = name_x + 2
   @name_contents.y = name_y + 2
   @name_contents.bitmap = bmp
   #@name_contents.z = @name_win.z + 2    #这个用了似乎效果不好<- bbschat

else

   @face_pic_txt = 0                      #名字窗口使用文字<- bbschat

   # 生成名字
   name_width = mes_name.size / 2 * FUKI::NAME_FONT_SIZE
   name_height = FUKI::NAME_FONT_SIZE
   name_x = self.x + FUKI::NAME_SHIFT_X
   name_y = self.y - name_height - 16 + FUKI::NAME_SHIFT_Y

   # 生成角色名字窗口（只有边框）
   @name_win = Window_Base.new(name_x, name_y, name_width + 16, name_height + 16)
   @name_win.windowskin = RPG::Cache.windowskin(skin)
   @name_win.back_opacity = FUKI::NAME_OPACITY
   @name_win.z = self.z + 1

   # 为了使空白比Windows类限定的更小使用双重结构
   @name_contents = Sprite.new
   @name_contents.x = name_x + 12
   @name_contents.y = name_y + 8
   @name_contents.bitmap = Bitmap.new(name_width, name_height)
   @name_contents.z = @name_win.z + 2

   # 设定文字色
   nil_color = Color.new(0,0,0,0)
   if FUKI::NAME_COLOR != nil_color
      @name_contents.bitmap.font.color = FUKI::NAME_COLOR
   else
      @name_contents.bitmap.font.color = normal_color
   end
   @name_contents.bitmap.font.size = FUKI::NAME_FONT_SIZE
   # 调整窗口尺寸
   rect = @name_contents.bitmap.text_size(mes_name)
   @name_win.width = rect.width + 32
   # 描画名字
   @name_contents.bitmap.draw_text(rect, mes_name)
end
  end

end

#--------------------------------------------------------------------------
# ○ 释放呼出对话框和角色名字窗口
#--------------------------------------------------------------------------
def del_fukidasi
  if @tale != nil
@tale.dispose
@tale = nil
  end
  if @name_win != nil
@name_win.dispose
@name_win = nil
@name_contents.dispose
@name_contents = nil
  end
  self.opacity = 0
  self.x = 80
  self.width = 480
  self.height = 160
  self.contents.dispose
  self.contents = Bitmap.new(width - 32, height - 32)
  self.pause = true
end

#--------------------------------------------------------------------------
# ○ 取得角色
#    parameter : 参数
#--------------------------------------------------------------------------
def get_character(parameter)
if $game_switches[33]
  #........................................................................
  case parameter
  when 0
return $game_player
  else
events = $game_map.events
return events == nil ? nil : events[parameter]
  end
  #........................................................................
else
  # 参数分歧
  case parameter
  when -1  # 玩家
return $game_player
  when 0 # 该事件
events = $game_map.events
return events == nil ? nil : events[$active_event_id]
  else    # 特定事件
if parameter >0
   events = $game_map.events
   return events == nil ? nil : events[parameter]
else
   $game_party.return_char(-parameter-2)
end
  end
end
end

#--------------------------------------------------------------------------
# ● 设定窗口位置和不透明度
#--------------------------------------------------------------------------
def reset_window
if $game_switches[33]
#........................................................................
# 判定
if @popchar >= 0
   events = $game_map.events
   if events != nil
   character = get_character(@popchar)
   x = [[character.screen_x - 0 - self.width / 2, 4].max, 636 - self.width].min
   y = [[character.screen_y - 48 - self.height, 4].max, 476 - self.height].min
   self.x = x
   self.y = y
   end
elsif @popchar == -1
   self.x = -4
   self.y = -4
   self.width = 648
   self.height = 488
else
   if $game_temp.in_battle
   self.y = 16
   else
   case $game_system.message_position
   when 0 # 上
      self.y = 16
   when 1 # 中
      self.y = 160
   when 2 # 下
      self.y = 365
   end
   self.x = $game_variables[21]
   if @face_file == nil
      self.width = 480
   else
      self.width = 600
      self.x -= 58
   end
   self.height = 160
   end
end
self.contents = Bitmap.new(self.width - 32, self.height - 32)
if @face_file != nil
   self.contents.blt(16, 16, RPG::Cache.picture(@face_file), Rect.new(0, 0, 96, 96))
end
if @popchar == -1
   self.opacity = 255
   self.back_opacity = 0
elsif $game_system.message_frame == 0
   self.opacity = 255
   self.back_opacity = 200
else
   self.opacity = 0
   self.back_opacity = 200
end
#........................................................................
else
  if $game_temp.in_battle
self.y = 16
  else
case $game_system.message_position
when 0  # 上
   self.y = 16
when 1  # 中
   self.y = 160
when 2  # 下
   self.y = 320
end
  end
  if $game_system.message_frame == 0
self.opacity = 255
  else
self.opacity = 0
  end
  self.back_opacity = FUKI::MES_OPACITY
end
end

#--------------------------------------------------------------------------
# ● line_height-66rpg
#--------------------------------------------------------------------------
# 返回値：行高
#--------------------------------------------------------------------------
def line_height
  return 20
  if self.contents.font.size >= 20 and self.contents.font.size <= 24
return 20
  else
return self.contents.font.size * 15 / 10
  end
end
#--------------------------------------------------------------------------
# ● \V 变换-66rpg
#--------------------------------------------------------------------------
def convart_value(option, index)
  option == nil ? option = "" : nil
  option.downcase!
  case option
when "i"
   unless $data_items[index].name == nil
      r = sprintf("\030[%s]%s", $data_items[index].icon_name, $data_items[index].name)
   end
when "w"
   unless $data_weapons[index].name == nil
      r = sprintf("\030[%s]%s", $data_weapons[index].icon_name, $data_weapons[index].name)
   end
when "a"
   unless $data_armors[index].name == nil
      r = sprintf("\030[%s]%s", $data_armors[index].icon_name, $data_armors[index].name)
   end
when "s"
   unless $data_skills[index].name == nil
      r = sprintf("\030[%s]%s", $data_skills[index].icon_name, $data_skills[index].name)
   end
else
r = $game_variables[index]
  end
  r == nil ? r = "" : nil
  return r
end
#--------------------------------------------------------------------------
# ● 刷新画面
#--------------------------------------------------------------------------
def update
  if $game_switches[33]
#........................................................................
super
if @fade_in
   self.contents_opacity += 24
   if @input_number_window != nil
   @input_number_window.contents_opacity += 24
   end
   if self.contents_opacity == 255
   @fade_in = false
   end
   return
end
@now_text = nil if @now_text == ""

if @now_text != nil and @mid_stop == false
   if @write_wait > 0
   @write_wait -= 1
   return
   end
   text_not_skip = $game_system.typing
   while true
   @max_x = @x if @max_x < @x
   @max_y = @y if @max_y < @y
   if (c = @now_text.slice!(/./m)) != nil
      if c == "\000"
         c = "\\"
      end
      if c == "\001"
         @now_text.sub!(/\[([0-9]+)\]/, "")
         color = $1.to_i
         if color >= 0 and color <= 7
         self.contents.font.color = text_color(color)
         end
         c = ""
      end
      if c == "\002"
         if @gold_window == nil and @popchar <= 0
         @gold_window = Window_Gold.new
         @gold_window.x = 560 - @gold_window.width
         if $game_temp.in_battle
            @gold_window.y = 192
         else
            @gold_window.y = self.y >= 128 ? 32 : 384
         end
         @gold_window.opacity = self.opacity
         @gold_window.back_opacity = self.back_opacity
         end
         c = ""
      end
      if c == "\003"
         @now_text.sub!(/\[([0-9]+)\]/, "")
         speed = $1.to_i
         if speed >= 0 and speed <= 19
         @write_speed = speed
         end
         c = ""
      end
      if c == "\004"
         @now_text.sub!(/\[(.*?)\]/, "")
         buftxt = $1.dup.to_s
         if buftxt.match(/\//) == nil and buftxt != "" then
         $game_system.soundname_on_speak = "Audio/SE/" + buftxt
         else
         $game_system.soundname_on_speak = buftxt.dup
         end
         c = ""
      elsif c == "\004"
         c = ""
      end
      if c == "\005"
         @write_wait += 5
         c = ""
      end
      if c == "\006"
         @write_wait += 20
         c = ""
      end
      if c == "\016"
         text_not_skip = false
         c = ""
      end
      if c == "\017"
         text_not_skip = true
         c = ""
      end
      if c == "\020"
         @mid_stop = true
         c = ""
      end
      if c == "\021"
         terminate_message
         return
      end
      if c == "\023"
         @indent = @x
         c = ""
      end
      if c == "\024"
         @now_text.sub!(/\[([0-9]+)\]/, "")
         @opacity = $1.to_i
         c = ""
      end
      if c == "\025"
         @now_text.sub!(/\[([0-9]+)\]/, "")
         self.contents.font.size = [[$1.to_i, 6].max, 32].min
         c = ""
      end
      if c == "\026"
         @now_text.sub!(/\[([0-9]+)\]/, "")
         @x += $1.to_i
         c = ""
      end
      if c == "\027"
         @now_text.sub!(/\[(.*?)\]/, "")
         @x += ruby_draw_text(self.contents, @x, @y * line_height + (line_height - self.contents.font.size), $1, @opacity)
         if $game_system.soundname_on_speak != ""
         Audio.se_play($game_system.soundname_on_speak)
         end
         c = ""
      end
      if c == "\030"
         @now_text.sub!(/\[(.*?)\]/, "")
         self.contents.blt(@x , @y * line_height + 8, RPG::Cache.icon($1), Rect.new(0, 0, 24, 24))
      if $game_system.soundname_on_speak != ""
         Audio.se_play($game_system.soundname_on_speak)
         end
         @x += 24
         c = ""
      end
      if c == "\n"
         if @lines >= $game_temp.choice_start
         @cursor_width = [@cursor_width, @max_x - @face_indent].max
         end
         @lines += 1
         @y += 1
         @x = 0 + @indent + @face_indent
         if @lines >= $game_temp.choice_start
         @x = 8 + @indent + @face_indent
         end
         c = ""
      end
      if c != ""
         # 文字描画
         @x += opacity_draw_text(self.contents, @x, @y * line_height + (line_height - self.contents.font.size), c, @opacity)
         if $game_system.soundname_on_speak != "" then
         Audio.se_play($game_system.soundname_on_speak)
         end
      end
      if Input.press?(Input::C) and $game_switches[34]
         text_not_skip = false
      end
      if Input.press?(Input::B)
         text_not_skip = false
      end
   else
      text_not_skip = true
      break
   end
   # 終了判定
   if text_not_skip
      break
   end
   end
   @write_wait += @write_speed
   return
end
if @input_number_window != nil
   @input_number_window.update
   # 決定
   if Input.trigger?(Input::C)
   $game_system.se_play($data_system.decision_se)
   $game_variables[$game_temp.num_input_variable_id] =
   @input_number_window.number
   $game_map.need_refresh = true
   @input_number_window.dispose
   @input_number_window = nil
   terminate_message
   end
   return
end
if @contents_showing
   if $game_temp.choice_max == 0
   self.pause = true
   end
   # 取消
   if Input.trigger?(Input::B)
   if $game_temp.choice_max > 0 and $game_temp.choice_cancel_type > 0
      $game_system.se_play($data_system.cancel_se)
      $game_temp.choice_proc.call($game_temp.choice_cancel_type - 1)
      terminate_message
   end
   end
   # 決定
   if Input.trigger?(Input::C)
   if $game_temp.choice_max > 0
      $game_system.se_play($data_system.decision_se)
      $game_temp.choice_proc.call(self.index)
   end
   if @mid_stop
      @mid_stop = false
      return
   else
      terminate_message
   end
   end
   return
end
if @fade_out == false and $game_temp.message_text != nil
   @contents_showing = true
   $game_temp.message_window_showing = true
   refresh
   Graphics.frame_reset
   self.visible = true
   self.contents_opacity = 0
   self.contents.font.size = 20
   self.contents.font.color =Color.new(74,8, 8, 255)
if @input_number_window != nil
   @input_number_window.contents_opacity = 0
end
   @fade_in = true
   return
end
if self.visible
   @fade_out = true
   self.opacity -= 48
   if self.opacity == 0
   self.visible = false
   @fade_out = false
   $game_temp.message_window_showing = false
   end
   return
end
#........................................................................
else
  super
  # 呼出模式下跟随事件移动
  if @tale != nil
pos = get_fuki_pos(self.width, self.height)
self.x = pos[0]
self.y = pos[1]

tale_pos = get_tale_pos
@tale.x = tale_pos[0]
@tale.y = tale_pos[1]

if @name_win != nil
   name_pos = get_name_pos
   @name_win.x = name_pos[0]
   @name_win.y = name_pos[1]
   case @face_pic_txt
      when 0  # 文字
      @name_contents.x = @name_win.x + 12
      @name_contents.y = @name_win.y + 8
      when 1  # 图片
      @name_contents.x = @name_win.x + 2
      @name_contents.y = @name_win.y + 2
      end
end
  end

  # 渐变的情况下
  if @fade_in
self.contents_opacity += 24
if @name_win != nil
   @name_win.opacity += 24
end
if @tale != nil
   @tale.opacity += 24
end
if @input_number_window != nil
   @input_number_window.contents_opacity += 24
end
if self.contents_opacity == 255
   @fade_in = false
end
return
  end
  # 显示信息中的情况下
  if @contents_drawing
refresh_drawtext
return
  end
  # 输入数值的情况下
  if @input_number_window != nil
@input_number_window.update
# 确定
if Input.trigger?(Input::C)
   $game_system.se_play($data_system.decision_se)
   $game_variables[$game_temp.num_input_variable_id] =
      @input_number_window.number
   $game_map.need_refresh = true
   # 释放输入数值窗口
   @input_number_window.dispose
   @input_number_window = nil
   terminate_message
end
return
  end
  # 显示信息结束的情况下
  if @contents_showing_end
# 不是显示选择项且不是呼出对话模式则显示暂停标志
if $game_temp.choice_max == 0 and @tale == nil
   self.pause = true
else
   self.pause = false
end
# 取消
if Input.trigger?(Input::B)
   if $game_temp.choice_max > 0 and $game_temp.choice_cancel_type > 0
      $game_system.se_play($data_system.cancel_se)
      $game_temp.choice_proc.call($game_temp.choice_cancel_type - 1)
      terminate_message
   end
end
# 确定
if Input.trigger?(Input::C)
   if $game_temp.choice_max > 0
      $game_system.se_play($data_system.decision_se)
      $game_temp.choice_proc.call(self.index)
   end
   terminate_message
   # 释放呼出窗口
   del_fukidasi
end
return
  end
  # 在渐变以外的状态下有等待显示的信息与选择项的场合
  if @fade_out == false and $game_temp.message_text != nil
@contents_showing = true
$game_temp.message_window_showing = true
reset_window
refresh_create
if @name_win != nil
   @name_win.opacity = 0
end
if @tale != nil
   @tale.opacity = 0
end
Graphics.frame_reset
self.visible = true
self.contents_opacity = 0
if @input_number_window != nil
   @input_number_window.contents_opacity = 0
end
@fade_in = true
return
  end
  # 没有可以显示的信息、但是窗口为可见的情况下
  if self.visible
@fade_out = true
self.opacity -= 48
if @name_win != nil
   @name_win.opacity -= 48
end
if @tale != nil
   @tale.opacity -= 48
end
if self.opacity == 0
   self.visible = false
   @fade_out = false
   $game_temp.message_window_showing = false
   del_fukidasi
end
return
  end
end
end

#--------------------------------------------------------------------------
# ● 透過文字描画 - 66rpg
#--------------------------------------------------------------------------
# target ：描画対象。Bitmapクラスを指定。
# x ：x座標
# y ：y座標
# str　：描画文字列
# opacity：透過率(0～255)
# 返回値：文字幅(@x増加値)。
#--------------------------------------------------------------------------
def opacity_draw_text(target, x, y, str,opacity)
  height = target.font.size
  width = target.text_size(str).width
  opacity = [[opacity, 0].max, 255].min
  if opacity == 255
target.draw_text(x, y, width, height, str)
return width
  else
if @opacity_text_buf.width < width or @opacity_text_buf.height < height
   @opacity_text_buf.dispose
   @opacity_text_buf = Bitmap.new(width, height)
else
   @opacity_text_buf.clear
end
@opacity_text_buf.font.size = target.font.size
@opacity_text_buf.draw_text(0, 0, width, height, str)
target.blt(x, y, @opacity_text_buf, Rect.new(0, 0, width, height), opacity)
  return width
  end
end
def ruby_draw_text(target, x, y, str,opacity)
  sizeback = target.font.size
  target.font.size * 3 / 2 > 32 ? rubysize = 32 - target.font.size : rubysize = target.font.size / 2
  rubysize = [rubysize, 6].max

  opacity = [[opacity, 0].max, 255].min
  split_s = str.split(/,/)

  split_s[0] == nil ? split_s[0] = "" : nil
  split_s[1] == nil ? split_s[1] = "" : nil

  height = sizeback + rubysize
  width = target.text_size(split_s[0]).width

  target.font.size = rubysize
  ruby_width = target.text_size(split_s[1]).width
  target.font.size = sizeback

  buf_width = [target.text_size(split_s[0]).width, ruby_width].max

  width - ruby_width != 0 ? sub_x = (width - ruby_width) / 2 : sub_x = 0

  if opacity == 255
target.font.size = rubysize
target.draw_text(x + sub_x, y - target.font.size, target.text_size(split_s[1]).width, target.font.size, split_s[1])
target.font.size = sizeback
target.draw_text(x, y, width, target.font.size, split_s[0])
return width
  else
if @opacity_text_buf.width < buf_width or @opacity_text_buf.height < height
   @opacity_text_buf.dispose
   @opacity_text_buf = Bitmap.new(buf_width, height)
else
   @opacity_text_buf.clear
end
@opacity_text_buf.font.size = rubysize
@opacity_text_buf.draw_text(0 , 0, buf_width, rubysize, split_s[1], 1)
@opacity_text_buf.font.size = sizeback
@opacity_text_buf.draw_text(0 , rubysize, buf_width, sizeback, split_s[0], 1)
if sub_x >= 0
   target.blt(x, y - rubysize, @opacity_text_buf, Rect.new(0, 0, buf_width, height), opacity)
else
   target.blt(x + sub_x, y - rubysize, @opacity_text_buf, Rect.new(0, 0, buf_width, height), opacity)
end
return width
  end
end

#--------------------------------------------------------------------------
# ● 释放
#--------------------------------------------------------------------------
def dispose
if $game_switches[33]
  #........................................................................
  terminate_message
  if @gaiji_cache != nil
unless @gaiji_cache.disposed?
   @gaiji_cache.dispose
end
  end
  unless @opacity_text_buf.disposed?
@opacity_text_buf.dispose
  end
  $game_temp.message_window_showing = false
  if @input_number_window != nil
@input_number_window.dispose
  end
  super
  #........................................................................
else
  terminate_message
  $game_temp.message_window_showing = false
  if @input_number_window != nil
@input_number_window.dispose
  end
  super
end
end

#--------------------------------------------------------------------------
# ● 信息结束处理
#--------------------------------------------------------------------------
def terminate_message
if $game_switches[33]
  #........................................................................
  self.active = false
  self.pause = false
  self.index = -1
  self.contents.clear
  # 清除显示中标志
  @contents_showing = false
  # 呼叫信息调用
  if $game_temp.message_proc != nil
$game_temp.message_proc.call
  end
  # 清除文章、选择项、输入数值的相关变量
  $game_temp.message_text = nil
  $game_temp.message_proc = nil
  $game_temp.choice_start = 99
  $game_temp.choice_max = 0
  $game_temp.choice_cancel_type = 0
  $game_temp.choice_proc = nil
  $game_temp.num_input_start = 99
  $game_temp.num_input_variable_id = 0
  $game_temp.num_input_digits_max = 0
  # 开放金钱窗口
  if @gold_window != nil
@gold_window.dispose
@gold_window = nil
  end
  if @name_window_frame != nil
@name_window_frame.dispose
@name_window_frame = nil
  end
  if @name_window_text != nil
@name_window_text.dispose
@name_window_text = nil
  end
  if @right_picture != nil and @right_keep == true
@right_picture.dispose
  end
  if @left_picture != nil and @left_keep == true
@left_picture.dispose
  end
  #........................................................................
else
  self.active = false
  self.pause = false
  self.index = -1
  self.contents.clear
  # 清除显示中标志
  @contents_showing = false
  @contents_showing_end = false
  # 呼叫信息调用
  if $game_temp.message_proc != nil
$game_temp.message_proc.call
  end
  # 清除文章、选择项、输入数值的相关变量
  $game_temp.message_text = nil
  $game_temp.message_proc = nil
  $game_temp.choice_start = 99
  $game_temp.choice_max = 0
  $game_temp.choice_cancel_type = 0
  $game_temp.choice_proc = nil
  $game_temp.num_input_start = 99
  $game_temp.num_input_variable_id = 0
  $game_temp.num_input_digits_max = 0
  # 释放金钱窗口
  if @gold_window != nil
@gold_window.dispose
@gold_window = nil
  end
end
end

#--------------------------------------------------------------------------
# ● 刷新光标矩形
#--------------------------------------------------------------------------
def update_cursor_rect
if $game_switches[33]
  #.........................................................................
  if @index >= 0
n = $game_temp.choice_start + @index
self.cursor_rect.set(0 + @indent + @face_indent, n * 20 + 0, @cursor_width, 18)
  else
self.cursor_rect.empty
  end
  #.........................................................................
else
  if @index >= 0
n = $game_temp.choice_start + @index
self.cursor_rect.set(8, n * 32, @cursor_width, 32)
  else
self.cursor_rect.empty
  end
end
end
#--------------------------------------------------------------------------
# ● 取得普通文字色
#--------------------------------------------------------------------------
def normal_color
  nil_color = Color.new(0,0,0,0)
  if FUKI::FUKI_COLOR != nil_color
color = FUKI::FUKI_COLOR
  else
color = super
  end
  return color
end
end

#==============================================================================
# ■ Interpreter
#==============================================================================

class Interpreter
#--------------------------------------------------------------------------
# ● 设置事件
#    event_id : 事件 ID
#--------------------------------------------------------------------------
alias setup_fuki setup
def setup(list, event_id)
  setup_fuki(list, event_id)
  # 如果不是战斗中
  if !($game_temp.in_battle)
# 记录事件 ID
$active_event_id = event_id
  end
end
end

#==============================================================================
# ■ Scene_Map
#==============================================================================

class Scene_Map
#--------------------------------------------------------------------------
# ● 主处理
#--------------------------------------------------------------------------
def main
  # 生成活动块
  @spriteset = Spriteset_Map.new
  # 生成信息窗口
  @message_window = Window_FukiMessage.new
  # 执行过渡
  Graphics.transition
  # 主循环
  loop do
# 刷新游戏画面
Graphics.update
# 刷新输入信息
Input.update
# 刷新画面
update
# 如果画面切换的话就中断循环
if $scene != self
   break
end
  end
  # 准备过渡
  Graphics.freeze
  # 释放活动块
  @spriteset.dispose
  # 释放信息窗口
  @message_window.dispose
  # 标题画面切换中的情况下
  if $scene.is_a?(Scene_Title)
# 淡入淡出画面
Graphics.transition
Graphics.freeze
  end
end
end

#==============================================================================
# ■ Window_InputNumber
#==============================================================================

class Window_InputNumber < Window_Base
#--------------------------------------------------------------------------
# ● 初始化对像
#    digits_max : 位数
#--------------------------------------------------------------------------
def initialize(digits_max)
  @digits_max = digits_max
  @number = 0
  # 从数字的幅度计算(假定与 0～9 等幅)光标的幅度
  dummy_bitmap = Bitmap.new(32, 32)
  dummy_bitmap.font.size = FUKI::MES_FONT_SIZE
  @cursor_width = dummy_bitmap.text_size("0").width + 8
  dummy_bitmap.dispose
  super(0, 0, @cursor_width * @digits_max + 32, 64)
  self.contents = Bitmap.new(width - 32, height - 32)
  self.contents.font.size = FUKI::MES_FONT_SIZE
  self.z += 9999
  self.opacity = 0
  @index = 0
  refresh
  update_cursor_rect
end
end

作者: IamI 时间: 2009-8-29 10:08
思路的话，一次update描绘5字如何？

作者: tree52 时间: 2009-8-29 21:05
我的思路不晓得对不对的，并行处理，当ctrl按下的时候（你的ctrl应该没别的什么功能了吧）更改如2楼脚本中的$mes_speed即可。

作者: 小闵 时间: 2009-8-30 00:26
本来的显示文章的时候按Esc就能马上显示完毕...

欢迎光临 Project1 (https://rpg.blue/)