关于影子系统VX版[精灵使者完美汉化版] - Project1

# 来自:未知
#========================================================================
# ■ 设定系统部分 ■ #
#========================================================================
# 跟随系统部分设定（如果选用了相应的系统请选true，否则选false)
CATERPILLAR_COMPATIBLE = false # 原版跟随系统兼容开关
SQUAD_MOVE_COMPATIBLE = false # Near Fantastica的跟随系统兼容开关
CCOA_CATER_COMPATIBLE = false # Ccoa的跟随系统兼容开关
TRICKSTER_CATER_COMPATIBLE = false # Trickster的跟随系统兼容开关
# 太阳系统的特别设定
SUN_WARN = true # 检查是否兼容老版本的太阳系统
SUN_ANGLE = 45 # 默认太阳系统产生的影子角度
SUN_OPACITY = 128 # 默认太阳系统产生的影子深度
#========================================================================
# ■■ 设定部分结束 ■■ #
#========================================================================
#==================================================================================
# ■ Game_Temp
#------------------------------------------------------------------------------
# 　在没有存档的情况下，处理临时数据的类。这个类的实例请参考 $game_temp 。
#=================================================================================
class Game_Temp
#--------------------------------------------------------------------------
# ● 定义实例变量
#--------------------------------------------------------------------------
attr_accessor :sun_spriteset # 维持太阳阴影的活动块
end
#==================================================================================
# ■ Game_Party
#------------------------------------------------------------------------------
# 　处理同伴的类。包含金钱以及物品的信息。本类的实例请参考 $game_party。
#==================================================================================
class Game_Party
#--------------------------------------------------------------------------
# ● 定义实例变量
#--------------------------------------------------------------------------
attr_reader :characters
end
#==================================================================================
# ■ Sprite_Sun
#------------------------------------------------------------------------------
# 根据角色的地图位置来处理角色阴影角度的精灵（活动块）类。Game_Character 类的实例
# 监视、活动块状态的自动变化。
#==================================================================================
class Sprite_Sun < RPG::Sprite
#--------------------------------------------------------------------------
# ● 定义实例变量
#--------------------------------------------------------------------------
attr_accessor :character
#--------------------------------------------------------------------------
# ● 初始化对象
# viewport : 显示端口
# character : 角色 (Game_Character)
# id : 角色ID
#--------------------------------------------------------------------------
def initialize(viewport, character = nil, id=0)
super(viewport)
@character = character
params=$game_temp.sun_spriteset.sun[id]
# 默认设置
self_angle = SUN_ANGLE
self_opacity = SUN_OPACITY
# 根据参数的设置
self_angle = params[0] if params.size > 0
self_opacity = params[1] if params.size > 1
@self_angle = self_angle
@self_opacity = self_opacity
update
end
#--------------------------------------------------------------------------
# ● 更新画面
#--------------------------------------------------------------------------
def update
super
# 在图块ID，文件名或者色相不同于当前的情况下
if @tile_id != @character.tile_id or
@character_name != @character.character_name or
@character_hue != @character.character_hue
@tile_id = @character.tile_id
@character_name = @character.character_name
@character_hue = @character.character_hue
if @tile_id > 0
sx = (@tile_id / 128 % 2 * 8 + @tile_id % 8) * 32;
sy = @tile_id % 256 / 8 % 16 * 32;
set_number = @tile_id / 256
self.bitmap = RPG::Cache.system("TileB") if set_number == 0
self.bitmap = RPG::Cache.system("TileC") if set_number == 1
self.bitmap = RPG::Cache.system("TileD") if set_number == 2
self.bitmap = RPG::Cache.system("TileE") if set_number == 3
self.src_rect.set(0, 0, 32, 32)
self.ox = 16
self.oy = 32
else
#self.bitmap =RPG::Cache.character(@character_name)#影子参数的对应修改
self.bitmap = RPG::Cache.character(@character.character_name,
@character.character_hue)
sign = @character_name[/^[\!\$]./]
if sign != nil and sign.include?(')
@cw = bitmap.width / 4#影子的完整度设定
@ch = bitmap.height / 4#影子的完整度设定
else
@cw = bitmap.width / 4#影子的完整度设定
@ch = bitmap.height / 4#影子的完整度设定
end
self.ox = @cw / 2
self.oy = @ch
end
end
# 设置可见状况
self.visible = (not @character.transparent)
# 如果画面是角色的情况下
if @tile_id == 0
hue = @character.character_hue
pattern = @character.pattern < 3 ? @character.pattern : 1
# 矩形本体设定
sx = (hue % 4 * 3 + pattern) * @cw
@direct = @character.direction
if self.angle > 90 or angle < -90
sy = ( 4 - 2) / 2 * @ch if @direct == 6
sy = ( 6 - 2) / 2 * @ch if @direct == 4
sy = (@character.direction - 2) / 2 * @ch if @direct != 4 and @direct != 6
else
sy = (hue / 4 * 4 + (@character.direction - 2) / 2) * @ch
#sy = @character.direction
end
self.src_rect.set(sx, sy, @cw, @ch)
end
# 设置精灵（活动块）的坐标
self.x = @character.screen_x#
self.y = @character.screen_y-5 #
#self.z = 10#@character.screen_z-1
self.z = @character.screen_z(@ch)-1#
# 设置不透明度，合成方式和草木深度
self.opacity = @self_opacity
# self.opacity = @character.opacity#
self.blend_type = @character.blend_type
self.bush_depth = @character.bush_depth
# 显示动画
if @character.animation_id != 0#
animation = $data_animations[@character.animation_id]#
animation(animation, true)#
@character.animation_id = 0#
end
self.angle = @self_angle.to_i - 90
self.color = Color.new(0, 0, 0)
end
end
#==================================================================================
# ■ Sprite_Character
#------------------------------------------------------------------------------
# 角色显示用脚本。监视 Game_Character 类的实例、自动变化脚本状态。
#==================================================================================
class Sprite_Character < RPG::Sprite
#--------------------------------------------------------------------------
# ● 重命名函数列表
#--------------------------------------------------------------------------
alias sun_initialize initialize
alias sun_update update
#--------------------------------------------------------------------------
# ● 初始化对像
# viewport : 显示端口
# character : 角色 (Game_Character)
#--------------------------------------------------------------------------
def initialize(viewport, character = nil)
#@viewport0 = Viewport.new(0, 0, 544, 416)
@viewport = Viewport.new(0, 0, 800, 600)#修改影子的行动范围，不做剪切
viewport.z = 0#战斗清除影子,地图切换清楚影子,改为1则有延迟
@character = character
super(viewport)
@sunlist=[]
if character.is_a?(Game_Event) and $game_temp.sun_spriteset.sun != []
params = XPML.XPML_read("Shadow", @character.id, 2)
if params != nil
for i in 0...$game_temp.sun_spriteset.sun.size
@sunlist.push(Sprite_Sun.new(viewport, @character, i))
end
end
end
if character.is_a?(Game_Player) and $game_temp.sun_spriteset.sun != []
for i in 0...$game_temp.sun_spriteset.sun.size
@sunlist.push(Sprite_Sun.new(viewport, $game_player, i))
end
#===================================================
# ● 与人物跟随功能兼容脚本
#===================================================
if CATERPILLAR_COMPATIBLE and $game_party.characters != nil
for member in $game_party.characters
for i in 0...$game_temp.sun_spriteset.sun.size
@sunlist.push(Sprite_Sun.new(viewport, member, i))
end
end
end
if SQUAD_MOVE_COMPATIBLE and $game_allies.values != nil
for member in $game_allies.values
for i in 0...$game_temp.sun_spriteset.sun.size
@sunlist.push(Sprite_Sun.new(viewport, member, i))
end
end
end
if CCOA_CATER_COMPATIBLE and $game_train.actors != nil
for member in $game_train.actors
for i in 0...$game_temp.sun_spriteset.sun.size
@sunlist.push(Sprite_Sun.new(viewport, member, i))
end
end
end
if TRICKSTER_CATER_COMPATIBLE and $game_party.followers != nil
for member in $game_party.followers
for i in 0...$game_temp.sun_spriteset.sun.size
@sunlist.push(Sprite_Sun.new(viewport, member, i))
end
end
end
#===================================================
# ● 兼容脚本结束
#===================================================
end
# 执行原始函数调用
sun_initialize(viewport, @character)
end
#--------------------------------------------------------------------------
# ● 更新画面
#--------------------------------------------------------------------------
def update
sun_update
if @sunlist != []
for i in [email protected]
@sunlist[i].update
end
end
end
end
#==================================================================================
# ■ Game_Event
#------------------------------------------------------------------------------
# 　处理事件的类。条件判断、事件页的切换、并行处理、执行事件功能
# 在 Game_Map 类的内部使用。
#==================================================================================
class Game_Event < Game_Character
#--------------------------------------------------------------------------
# ● 定义实例变量
#--------------------------------------------------------------------------
attr_accessor :id
end
#==================================================================================
# ■ Spriteset_Map
#------------------------------------------------------------------------------
# 　处理地图画面活动块和元件的类。本类在 Scene_Map 类的内部使用。
#================================================================================
class Spriteset_Map
#--------------------------------------------------------------------------
# ● 定义实例变量
#--------------------------------------------------------------------------
attr_accessor :sun
#--------------------------------------------------------------------------
# ● 重命名函数列表
#--------------------------------------------------------------------------
alias sun_initialize initialize
#--------------------------------------------------------------------------
# ● 初始化对象
#--------------------------------------------------------------------------
def initialize
@sun = []
$game_temp.sun_spriteset = self
warn = false
for k in $game_map.events.keys.sort
if ($game_map.events[k].list != nil and
$game_map.events[k].list[0].code == 108 and
($game_map.events[k].list[0].parameters == ["Sun"] or
$game_map.events[k].list[0].parameters == ["o"]))
warn = true
end
params = XPML.XPML_read("Sun", k, 2)
$game_temp.sun_spriteset.sun.push(params) if params != nil
end
if warn == true and SUN_WARN
p "警告：在地图上至少有一个事件使用了过去的方法来添加太阳效果"
end
# 执行原始函数调用
sun_initialize
end
end
#==============================================================================
# ■ module XPML
#------------------------------------------------------------------------------
# 本模块用来读取并传递注释中的参数。
#
# 使用此模块的主要用途就是检查和读出事件的注释。
# * 标记的关键字的注明方法：
# begin 关键字
# * 注意参数之间必须用关键字隔开。
# * 调用此函数的方法：
# XPML_read("关键字"，事件ID，读取参数的最大值）
# * 最后一项可以忽略，默认为整个事件。
# * 赋值方法：
# 变量名参数
# * 每个变量名和参数各占一行。
# * 如果指明的关键字在事件里面不存在的话，则返回nil。
# * 如果两个标记之间没有参数的话，则返回空数组。
# * 如果参数中有数字参数的话，会自动返回为数字变量。
# 举例：在一个事件中的注释写入（每个注释写一行，#号后面的不写）
# begin first # 第一关键字
# begin second #第二关键字
# 变量1 1
# 变量2 two
# begin third #第三关键字
# 任何东西 3
# 然后得出转换结果：
# p XPML_read("first", event_id) -> [] #第一关键字和第二关键字没有参数
# p XPML_read("second", event_id) -> [1,"two"] #第二关键字和第三关键字之间有2个参数
# p XPML_read("third", event_id) -> [3] #第三关键字之间有一个参数
# p XPML_read("forth", event_id) -> nil #找不到第四关键字则返回nil
#===================================================
module XPML
module_function
#--------------------------------------------------------------------------
# ● XPML_read
# markup : 需要在文件注释里检查的关键字。
# event_id : 事件ID
# max_param_number : 读取参数/注释的最大值，0为事件内的所有注释
#--------------------------------------------------------------------------
def XPML_read(markup, event_id, max_param_number = 0)
parameter_list = nil
event = $game_map.events[event_id]
return if event.list == nil
for i in 0...event.list.size
if event.list[i].code == 108 and
event.list[i].parameters[0].downcase == "begin " + markup.downcase
parameter_list = [] if parameter_list == nil
for j in i + 1...event.list.size
if event.list[j].code == 108
parts = event.list[j].parameters[0].split
if parts.size != 1 and parts[0].downcase != "begin"
if parts[1].to_i != 0 or parts[1] == "0"
parameter_list.push(parts[1].to_i)
else
parameter_list.push(parts[1])
end
else
return parameter_list
end
else
return parameter_list
end
if max_param_number != 0 and j == i + max_param_number
return parameter_list
end
end
end
end
return parameter_list
end
end

复制代码