Project1

标题: 仙剑5今天貌似正式发售，该买吗？会不会像古剑一样不好玩 [打印本页]
作者: 一瞬间的幻觉    时间: 2011-7-8 01:39
标题: 仙剑5今天貌似正式发售，该买吗？会不会像古剑一样不好玩
之前古剑奇谭出了以后，马上去买了数字版的激活码，后来又继续买了所有的DLC。
玩了几天，感觉战斗方式太繁琐了，玩惯了西式的ARPG那种快节奏的游戏，还有
畅快淋漓的FPS游戏和ACT游戏，再来玩回合制果然困得要死，而且剧情还不是一般的
拖戏，玩到第二个小镇就已经萌发了“只是想撑着看看结局”这样的念头。

后来果然没有坚持下去（事实上，近年来玩了大量的休闲游戏后，就没有耐心去玩长篇的了）。

这次仙剑5出了，要不要去买数字版呢？
买了我一定没动力和时间去玩的，但是不买又觉得好可惜。

大家给出个主意吧

作者: 越前リョーマ    时间: 2011-7-8 01:47
我个人对3D、古装没兴趣 - -
所以仙剑完全不能吸引我。
作者: pastmm    时间: 2011-7-8 03:20
预订了仙5不过还没时间去领，反正国产每年就那么1-2作，玩下当换换口味，对游戏性没什么期待，心痒的话慢慢玩吧，欧美RPG不也要玩几个月嘛~
至于古剑，只能说那剧本更适合拍电视剧而不是用于游戏，坚持不下去很正常，去年我也熬了整个暑假才玩完，如此慢的节奏算是近年来的一个特例吧- -
作者: 一瞬间的幻觉    时间: 2011-7-8 03:50
pastmm 发表于 2011-7-8 03:20
预订了仙5不过还没时间去领，反正国产每年就那么1-2作，玩下当换换口味，对游戏性没什么期待，心痒的话慢慢 ...

大哥，古剑你真玩通关啦。。。。厉害

改天不填坑了我也想重温一下，古剑优化太差
双核4G+独显的机子都跑不动
作者: pastmm    时间: 2011-7-8 04:03
本帖最后由 pastmm 于 2011-7-8 04:06 编辑
一瞬间的幻觉 发表于 2011-7-8 03:50
大哥，古剑你真玩通关啦。。。。厉害

改天不填坑了我也想重温一下，古剑优化太差


剧情风格说不上有爱，战斗也不怎么好玩，但是花了钱也只好硬头皮通了=v=，还好后期剧情节奏稍微紧凑了点(不过得先熬过像咕噜湾那种拖延时间又没什么意思的剧情，真的让人有些恼火)，直接上修改器速通~
跟自己急躁的心态有关吧，反正古剑的城镇没2个是用心逛过的，尤其后面直奔剧情点去= =到后面DLC也没兴趣玩了


至于优化问题，据说打补丁有缓和，个人没试过

总之但愿这次的仙5别有古剑的毛病，我是受不了了
作者: s196050    时间: 2011-7-8 10:15
我是伪仙剑迷，但是我期望她会好，可是事实是现实永远和你的理想相差太远
作者: 薄荷冰水    时间: 2011-7-8 12:06
我有托同学帮我买回来，可是没抢到。古剑我没有玩
作者: 632808263    时间: 2011-7-8 12:21
买哎，，，我要买仙剑5豪华版的 不过要等到8月多 才有 啊啊啊啊，，，买豪华版一切为了收藏 嘿嘿， 至于玩游戏嘛，，，咳咳。。直接下修改器通关得了！玩这些游戏很无聊。。。
作者: 蛋糕    时间: 2011-7-8 12:30
少年不能这样啦……好歹支持下啊 -_-
作者: zhixin1997    时间: 2011-7-8 12:31
小瞬……仙五是昨天发售的
作者: colorlemon    时间: 2011-7-9 15:46
本帖最后由 colorlemon 于 2011-7-9 15:46 编辑

05年后出的游戏我一个都跑不起来，所以甚是淡定～
作者: 匿名    时间: 2011-7-9 17:22
colorlemon 发表于 2011-7-9 15:46
05年后出的游戏我一个都跑不起来，所以甚是淡定～

这么巧？石器是04年出的（大雾）
作者: starky_ds    时间: 2011-7-9 18:08
表示从来没想过买正版仙剑= =
作者: yangff    时间: 2011-7-10 11:20
本帖最后由 yangff 于 2011-7-10 11:22 编辑

已通关 ，建议楼主别买

1- Look for a decompiler such as PE Explore - you will need the full-blown version. The trial version does not allow date stamp removal

2- Make a backup copy of paul.dll

3- Decompile paul.dll and run CTRL Y command to get all the values available. You
will see “000h6h6h6? - this is normal, don’t panic. Just run the dissassembler in preferred mode and it will do all the work for ya.

4- Mark every hex ending with 06 as a “tag for later analysis” in group 1. Just conduct a search for them under group 1 and earmark them for later the information is used to detect the absolute offsets to the various content items in the file (for example: mov eax, offset L0041F46A, jmp L004A49FE) - don’t worry about the “49? values, they will never re-appear in the same columm. You should end up with 1026 marked entries. If you have more, then this means you also marked the glossary items found in the same target tree. Just delete these extra files. You will end up saving yourself some time. These entries are created to enable SecuROM in dedicated mode. If you disable this feature, you’ll thank me later. If you don’t then that’s ok, cuz you’ll have to re-enter a second sample of hexes into the decompiler and crash the old values.

5- Change every earmarked hex (except the ones contained in the 2nd tree ending with hex 0c) to check all the new values. You must first render these values with an hex renderer, such as WEP Key Generator, in order to render the proper values.

OPEN UP WEP
SET UP A KEY GENERATION FOR 16 KEYS
ADD A GENERIC ALGORITHM - SOMETHING LIKE “2X3-4+ all 16/500? THIS WILL SET UP THE NEW KEY GENERATOR AND TELL IT TO GENERATE A KEY FOLLOWING THE ASSIGNED FORMULA.

ONCE YOU HAVE GENERATED A FEW THOUSAND KEYS - I RECOMMEND SETTING UP AT LEAST 25,000 KEYS, COLLATE THEM WITH THE FORMULA AND EXPORT THEM BACK TO PE Explorer UNDER “NEW KEYS” AND END THE STATEMENT WITH THE ORIGINAL FORMULA. YOU DECIDE ON YOUR OWN FORMULA BUDDY. IT’S YOUR ASS,
NOT MINE.

NOW YOU WILL HAVE TO ENCODE THE ORIGINAL FORMULA. DON’T PANIC!!! JUST USE SOMETHING LIKE A SAT FORMULA MODEL CHECKER
ENCODE THE FORMULA AND COPY ALL THE RESULTS TO YOUR HEX EDITOR.
COPY THE HEX VALUES AND IMPORT THEM IN PE Explorer.

IS EVERYBODY STILL WITH ME SO FAR???

NOW THE EASY PART!!!

Note that with some PE files, for example those compressed by a packing utility, the original values of these flags do not survive decompression. This can produce very strange disassembly listings. DON’T PANIC !!! To alleviate this problem use the available resource table - NOT THE VALUE TABULATOR, because this will screw everything up. Once you reach the max byte of generated data, you’ll notice something very exciting indeed: YOUR CODE WILL NOW BE RUN IN EMULATION MODE, THEREFORE, IT WILL BE RESIDENT IN THE ACTUAL CODE. Isn’t this just fabulous??? Just a little trick I learned in school… hehe

6- Now don’t get too excited yet…Enter the new values by importing them from PCI Hexer - they will collate themselves in a new library under a second family (tree now ending with the new hexes generated)

7- SecuROM will be automatically disabled at this point - WOOHOO. I always use WS_EX_DLGMODALFRAME command to do this. You decide on your own…

8- Re-enable the partitioned values located in the source .dll and remove the date stamp with PE Explorer

9- re-enter the last tree ending with hex c9 and remove the debug info

10- save the new .dll under paul.dll and overwrite the old file.
replace the overwrite paul.dll with your new project and you’re ALMOST home buddy!

Now you are set to strip the new .dll and restamp it
Restamp the date with PE Explorer
Reset the debug attributes but DON’T IMPLEMENT THE ORIGINAL DATA!!!. This is very important. If you overwrite the data, you’ll screw everything up.
Your last eight (*) bytes are now ready - you should see the new header now commencing with c0060 - this is good
The new class will now be viewable. Delete the original one
save your project

START THE GAME
ENTER THE LAST CODE YOU GENERATED WITH THE WEP KEYGEN

PLAY THE GAME


亮点一直都有，就看楼主有没有发现亮点的眼睛
作者: 一瞬间的幻觉    时间: 2011-7-10 14:19
yangff 发表于 2011-7-10 11:20
已通关 ，建议楼主别买

1- Look for a decompiler such as PE Explore - you will need the full-blown ve ...

难不成被破解了？



欢迎光临 Project1 (https://rpg.blue/) Powered by Discuz! X3.1