【VX】753經驗找人修改"對話框加強版"跟"詳細幫助顯示"腳本 - Project1

#==============================================================================
# ■ [VX] 對話框加強版
# [VX] Window_message Plus
#----------------------------------------------------------------------------
# 此腳本可代替官方 Window_Message 全腳本
#----------------------------------------------------------------------------
# 使用說明:
#
# ⑴ 對話框第一行輸入引號內文字"名稱：",腳本會把名稱提取出來美化顯示
# 例如"張三：",顯示為"【張三】" ,美化符可在參數設定中修改
#
# ⑵ 默認頭像在左邊顯示
# 當您需要右邊顯示時,在第一行輸入的名稱時加"\r"(大小寫不限)
# 例: "拉爾夫\r："
# 請注意此時頭像將進行左右翻轉顯示
#
# ⑶ 在對話中更改字體的方法:
# \f[sX]:更改字號為X
# \f[nX]:更改字體名稱為"預設字體庫"第X號字體(預設字體庫請看參數設定)
# 更改字體名稱失敗(無指定字體或字體損壞)時,啟用遊戲默認字體
# \f[cX]:更改字色為第X號顏色 (text_color中的定義)
# \f[c#FF0000]:使用16進制指定字體顏色,如本句表示紅色
# \f[aX]:更改字體附加效果為第X號效果
# 附加樣式列表:
# X=0 :無附加; X=1 :陰影字; X=2 :粗體字;
# X=4 :斜體字; X=8 :描邊字; X=16:發光字
# 疊加效果即數字相加，示例: 3:陰影+粗體 14:粗體+斜體+描邊
# 注意!此三種效果互斥: 陰影/描邊/發光
#
# ⑷ 在對話中顯示(技能物品武器防具)圖標和名稱的方法:
# \s[X]: 顯示第X號技能圖標和名稱
# \i[X]: 顯示第X號物品圖標和名稱
# \w[X]: 顯示第X號武器圖標和名稱
# \a[X]: 顯示第X號防具圖標和名稱
#
# ⑸ 在對話中更改文字不透明度的方法:
# \o[X]: 把文字不透明度更改為X (取值範圍在0~255)
#
# ⑹ 指定時間後自動關閉對話框的方法:
# \x[X]: 對話框將在X幀後自動關閉
# \x: 省略參數時,將於AutoClose幀後自動關閉(AutoClose值在參數設定中)
#
# ⑺ 調整文字顯示速度的方法:
# \p[X]: 文字在X幀後顯示
#
# ⑻ 對話中更換對話框皮膚(或直接使用圖片)的方法:
# \b[X]: 更改字體名稱為"預設樣式庫"第X號樣式 (預設樣式庫請看參數設定)
# 注: vx對話框可使用Window皮膚或直接使用圖片,請配合事件頁設定
#
# 素材格式和命名規則:
# 在對應的Window皮膚或對話框圖片的文件名後+"_pause",做為自定義暫停標記
# 的名稱,並和對應皮膚或圖片文件放在一起.
#
# ⑼ 啟用頭像動態顯示的方法:
# \e[X]: 設定頭像動態顯示的值為X
# X=0 :關閉動態效果; X=1 :水平趨中; X=2 :漸顯
#
# ⑽ 在對話中更換頭像:
# \@[X]: 設定頭像索引號為X X值範圍0-7
# 可更改的僅是索引號,頭像文件名稱不可改主要用於對話中換表情
#
# ⑾ 輸入文章時設定凍結字符和注釋字符:
# #[XX]: 字符串XX被凍結,不受轉義等影響直接顯示
# #<XX>: 字符串XX被當作注釋,顯示文章時不出現
#------------------------------------------------------------------------------
# 素材要求：
#
# ① 採用vx默認頭像素材(Graphics\Faces)的格式
# 即每個素材文件由2行4列共8格頭像組成
#
# ② 要求所有頭像朝向一致(默認是正面偏右)
#
# ③ 自定義暫停標記的素材採用橫向多幀格式,每幀圖片大小一致
# 注意: 幀數在腳本參數中設定.
# 在對應的Window皮膚或對話框圖片的文件名後+"_pause",做為自定義暫停標記
# 的名稱,並和對應皮膚或圖片文件放在一起.
#------------------------------------------------------------------------------
# 合併功能附加說明：
#
# ① 對話框合併
# 頭像、背景、位置等相同的上下兩段對話都會被合併成一段對話;
# 如果要打斷合併,請在兩段對話之間加個非對話框的執行項,比如空注釋.
#
# ② 選擇項合併
# 當前選項組滿4項,且取消設定不為"分歧",且下一個執行項也是選擇組,就合併;
# 取消鍵的規定: 如果有"分歧",必須設定在最後一個選項組,其它不限.
# 合併後最多只有一個取消設定,多個設定時,僅最後一個有效.
#----------------------------------------------------------------------------
# 更新作者：沉影不器
# 許可協議： FSL
# 項目版本： 1.09.1031
# 引用網址： http://rpg.blue/thread-158161-1-1.html
#----------------------------------------------------------------------------
# - *1.09.1031* (2010-10-31) By 沉影不器
# *新增指定被凍結的字符串
# *新增允許字符串做為注釋
#
# - *1.08.1030* (2010-10-30) By 沉影不器
# *新增對話中更改頭像
# *新增允許指定16進制顏色為字色
# *修改取消對話中切換[是否獨立顯示選項窗體]的開關
#
# - *1.07.1029* (2010-10-29) By 沉影不器
# *優化重寫合併選擇項的功能,大幅降低衝突
#
# - *1.06.1026* (2010-10-26) By 沉影不器
# *修改頭像在右的控制符改為"\r"(大小寫不限)
# *優化改變字體失敗時使用默認字體
# *新增允許獨立顯示選項窗體
# *新增合併多個事件頁選項(突破4選項上限)
#
# - *1.05.1007* (2010-10-07) By 沉影不器
# *修復冒號被腳本占用而無法顯示
# *優化預處理部分數據
# *新增自定義暫停標記
# *新增全局和局部字速調整
# *新增支持滾動顯示多行對話內容
# *新增顯示動畫功能(數據庫動畫/心情動畫)
#
# - *1.04.0207* (2009-02-07) By 沉影不器
# *新增字體附加效果：發光字
# *新增更換對話皮膚功能
# *新增頭像動態顯現功能
#
# - *1.03.1107* (2008-11-07) By 沉影不器
# *優化字體附加效果的疊加方法
# *新增字體附加效果：斜體字
#
# - *1.02.1023* (2008-10-23) By 沉影不器
# *修復自動關閉對話框時可能存在的關閉延後生效
# *新增字體附加效果：無效果、陰影字、粗體字、描邊字
# *新增更改字體無效時，使用遊戲默認字體
#
# - *1.01.0911* (2008-09-11) By 沉影不器
# *新增更改字體功能
# *新增顯示(技能物品武器防具)圖標和名稱
# *新增更改文字不透明度
# *新增自動關閉對話框
#
# - *1.00.0831* (2008-08-31) By 沉影不器
# *初版
#==============================================================================
$fscript = {} if $fscript == nil
$fscript["Window_message_Plus"] = "1.09.1031"
#----------------------------------------------------------------------------
# ▼ 通用配置模塊
#----------------------------------------------------------------------------
module FSL
module Window_message_Plus
## 對話框的預設樣式庫(其中"Window"和"MessageBack"是vx默認樣式)
Msg_StyleLib = {0=>["Window","Sinicism"], ## Window皮膚
1=>["MessageBack","Black"]} ## 圖片皮膚
## 字體參數
Font_Lib = ["微軟正黑體"] ## 預設字體庫
Font_Space = 4 ## 字間距
EdgeColor = 15 ## 描邊顏色
GlowColor = 1 ## 發光顏色
## 名稱條參數
Name_Symbol = "＊＊" ## 為名稱添加的修飾符(一對)
Name_SpaceX = 6 ## 名稱條寬度縮進值
Name_SpaceY = 6 ## 名稱與對話內容之間的附加距離
Name_FontIndex = 0 ## 名稱文字字體在預設字體庫中的序號
Name_FontSize = 20 ## 名稱文字字號
Name_FontColor = 10 ## 名稱文字顏色
Name_FontAdj = 10 ## 名稱文字附加效果
NameBar_Color = 0 ## 名稱背景條顏色
NameBar_Opacity = 64 ## 名稱背景條透明度
## 頭像參數
Face_Enter = 0 ## 頭像顯示模式
Face_EnterRate = 12 ## 頭像進入畫面的時間
Face_AdjX = 6 ## 頭像橫坐標微調
Face_AdjY = -6 ## 頭像縱坐標微調
Face_Align = 2 ## 頭像垂直對齊方式
## 0:頂端對齊; 1:居中對齊; 2:底端對齊
## 對話框參數
Msg_FontName = 1 ## 對話文字字體在預設字體庫中的序號
Msg_FontSize = 20 ## 對話文字字號
Msg_FontColor = 0 ## 對話文字顏色
Msg_FontPlus = 18 ## 對話文字附加效果
## 全局功能參數
FastShow = true ## 確定鍵快速顯示文字
AutoClose = 80 ## 默認自動關閉時間(以幀計時)
GlobalSpeed = 0 ## 改變全局文字延時(以幀計時)
## 自定義暫停標記
Pause_Custom = 3 ## 位置(0:不使用 1:底邊居中 2:右下角 3:跟隨文字)
Pause_AdjX = -2 ## X坐標微調
Pause_AdjY = -2 ## Y坐標微調
Pause_AniCyc = 6 ## 動畫週期
Pause_AniFrm = 4 ## 動畫幀數
## 對話和選擇項合併
MultiLinesWait = 30 ## 滾動顯示對話的等待時間(0表示禁止合併多段對話)
Choice_Strip = true ## 是否單獨顯示選項窗體
## 注: 選擇項合併功能僅在單獨顯示的選項窗體生效
Choice_MaxLines = 4 ## 選項窗體的最大行數(0表示禁止合併多段選擇項)
## 注: 本參數僅在單獨顯示選項窗體時生效
end
end
#==============================================================================
# ■ Window_Message
#==============================================================================
class Window_Message < Window_Selectable
include FSL::Window_message_Plus
#--------------------------------------------------------------------------
# ● 常量
#--------------------------------------------------------------------------
MAX_LINE = 4 # 最大行數
#--------------------------------------------------------------------------
# ◎ 初始化對象
#--------------------------------------------------------------------------
def initialize
h = [Name_FontSize,Msg_FontSize].max + Name_SpaceY +
(Msg_FontSize+Font_Space)*(MAX_LINE-1) + 34
y = Graphics.height - h
super(0, y, Graphics.width, h)
self.z = 200
self.active = false
self.index = -1
self.openness = 0
@opening = false # 窗體正在打開的標誌
@closing = false # 窗體正在關閉的標誌
@text = nil # 已經沒有可顯示的文章
@contents_x = 0 # 下一條文字描繪的 X 坐標
@contents_y = 0 # 下一條文字描繪的 Y 坐標
@line_count = 0 # 現在描繪的行數
@wait_count = 0 # 等待計數
@background = 0 # 背景類型
@position = 2 # 顯示位置
@show_fast = false # 快速顯示標誌
@line_show_fast = false # 以行為單位快速顯示
@pause_skip = false # 省略等待輸入標誌
## 凍結字符池
@frozen_char = []
## 顯示名稱
@show_name = false
## 自定義暫停標記
@custom_pause = false if Pause_Custom > 0
## 多行對話框標記
@multi_lines = false
## 字體附加效果
@font_adj = Msg_FontPlus
create_gold_window
create_number_input_window
create_back_sprite
## 頭像左右判斷
@show_right = false
## 頭像寬度
@face_width = 0
## 生成自定義暫停標記
create_custom_pause
## 生成名稱背景條
create_namebar_sprite
## 生成頭像
create_face_sprite
## 修改默認字體
contents.font = default_font
end
#--------------------------------------------------------------------------
# ● 釋放
#--------------------------------------------------------------------------
def dispose
super
dispose_gold_window
dispose_number_input_window
dispose_back_sprite
end
#--------------------------------------------------------------------------
# ◎ 更新畫面
#--------------------------------------------------------------------------
def update
super
update_gold_window
update_number_input_window
update_back_sprite
update_show_fast
## 更新自定義暫停標記
update_custom_pause
unless @opening or @closing # 除窗體關閉以外
if @wait_count > 0 # 文章內等待中
@wait_count -= 1
elsif @multi_lines
scroll_line
elsif custom_pause # 等待文章翻頁待機中
input_pause
elsif self.active || @choice ## 正在輸入選擇項
input_choice
elsif @number_input_window.visible # 正在輸入數值
input_number
elsif @text != nil # 還有剩餘的文章
update_message # 更新消息
elsif continue? # 繼續的情況
start_message # 開始消息
open # 打開窗體
$game_message.visible = true
else # 不繼續的情況
close # 關閉窗體
$game_message.visible = @closing
end
end
## 頭像動態顯現
if @face_sprite.visible
## 水平趨中
result = @face_x <=> @face_sprite.x
x_enter = [(@face_x - @face_sprite.x).abs,Face_EnterRate].min
@face_sprite.x += x_enter if result > 0
@face_sprite.x -= x_enter if result < 0
## 漸顯
@face_sprite.opacity += Face_EnterRate if @face_sprite.opacity < 255
end
## 自動關閉對話框
if @auto_close != nil
if @auto_close > 0
@auto_close -= 1
else
terminate_message
end
end
end
#--------------------------------------------------------------------------
# ◎ 生成所持金窗體
#--------------------------------------------------------------------------
def create_gold_window
@gold_window = Window_Gold.new(384, 0)
@gold_window.openness = 0
## 統一字體
@gold_window.contents.font = default_font
end
#--------------------------------------------------------------------------
# ◎ 生成數值輸入窗體
#--------------------------------------------------------------------------
def create_number_input_window
@number_input_window = Window_NumberInput.new
@number_input_window.visible = false
## 統一字體
@number_input_window.contents.font = default_font
end
#--------------------------------------------------------------------------
# ● 生成背景活動塊
#--------------------------------------------------------------------------
def create_back_sprite
@back_sprite = Sprite.new
@back_sprite.bitmap = Cache.system("MessageBack")
@back_sprite.visible = (@background == 1)
@back_sprite.z = 190
end
#--------------------------------------------------------------------------
# ● 釋放所持金窗體
#--------------------------------------------------------------------------
def dispose_gold_window
@gold_window.dispose
end
#--------------------------------------------------------------------------
# ● 釋放數值輸入窗體
#--------------------------------------------------------------------------
def dispose_number_input_window
@number_input_window.dispose
end
#--------------------------------------------------------------------------
# ● 釋放背景活動塊
#--------------------------------------------------------------------------
def dispose_back_sprite
@back_sprite.dispose
end
#--------------------------------------------------------------------------
# ● 更新所持金窗體
#--------------------------------------------------------------------------
def update_gold_window
@gold_window.update
end
#--------------------------------------------------------------------------
# ● 更新數值輸入窗體
#--------------------------------------------------------------------------
def update_number_input_window
@number_input_window.update
end
#--------------------------------------------------------------------------
# ● 更新背景活動塊
#--------------------------------------------------------------------------
def update_back_sprite
@back_sprite.visible = (@background == 1)
@back_sprite.y = y - 16
@back_sprite.opacity = openness
@back_sprite.update
end
#--------------------------------------------------------------------------
# ◎ 更新快速顯示標誌
#--------------------------------------------------------------------------
def update_show_fast
if custom_pause or self.openness < 255
@show_fast = false
elsif Input.trigger?(Input::C)
if FastShow ## 快速顯示文字
@show_fast = true
@wait_count = 0
end
elsif not Input.press?(Input::C)
@show_fast = false
end
if @show_fast and @wait_count > 0
@wait_count -= 1
end
end
#--------------------------------------------------------------------------
# ● 判斷下一消息繼續顯示
#--------------------------------------------------------------------------
def continue?
return true if $game_message.num_input_variable_id > 0
return false if $game_message.texts.empty?
if self.openness > 0 and not $game_temp.in_battle
return false if @background != $game_message.background
return false if @position != $game_message.position
end
return true
end
#--------------------------------------------------------------------------
# ◎ 開始顯示消息
#--------------------------------------------------------------------------
def start_message
## 重設窗體背景與位置
reset_window
## 還原頭像左右判斷
@show_right = false
## 暫存消息
temp_texts = []
$game_message.texts.each do |text|
tmp = text.clone
## 判斷對話框皮膚
if tmp.sub!(/\\B\[(\d+)\]/i) { "" }
filename = Msg_StyleLib[@background][$1.to_i]
if @background == 0
self.windowskin = Cache.system(filename)
if Pause_Custom>0 && !@pause_sprite.nil? && !@pause_sprite.disposed?
@pause_sprite.bitmap = Cache.system(filename + "_pause")
end
else
@back_sprite.bitmap = Cache.system(filename)
if Pause_Custom>0 && !@pause_sprite.nil? && !@pause_sprite.disposed?
@pause_sprite.bitmap = Cache.system(filename + "_pause")
end
end
## 開始自定義暫停標記動畫
@pause_aniindex = -1
end
## 判斷頭像顯現
@face_enter = $1.to_i if tmp.sub!(/\\E\[(\d+)\]/i) { "" }
temp_texts.push(tmp)
end
## 判斷頭像方向
if !temp_texts[0].nil? and temp_texts[0].sub!(/\\R/i){ "" }
@show_right = true
end
## 判斷名稱
if temp_texts[0] != nil and temp_texts[0] =~ /[：:]/
if temp_texts[0] =~ /\\[:：]/
## 忽略名稱的處理
temp_texts[0].sub!(/\\:/) { ":" }
temp_texts[0].sub!(/\\：/) { "：" }
else
## 去冒號加修飾符(可選)
unless Name_Symbol.empty?
temp_texts[0].sub!(/[:：]/) { "" }
temp_texts[0] = Name_Symbol[0,Name_Symbol.size/2] +
temp_texts[0] + Name_Symbol[Name_Symbol.size/2,Name_Symbol.size/2]
end
## 設定文字顏色
temp_texts[0] = "\\C[#{Name_FontColor}]" +
temp_texts[0] + "\\C[#{Msg_FontColor}]"
## 設定文字字體
temp_texts[0] = "\\F[N#{Name_FontIndex}]" +
temp_texts[0] + "\\F[N#{Msg_FontName}]"
## 設定文字大小
temp_texts[0] = "\\F[S#{Name_FontSize}]" +
temp_texts[0] + "\\F[S#{Msg_FontSize}]"
## 設定文字附加效果
temp_texts[0] = "\\F[A#{Name_FontAdj}]" +
temp_texts[0] + "\\F[A#{Msg_FontPlus}]"
## 顯示名稱背景條
show_namebar_sprite
end
end
@text = ""
for i in 0...temp_texts.size
@text += "　　" if i >= $game_message.choice_start
@text += temp_texts[i].clone + "\x00"
end
@item_max = $game_message.choice_max
convert_special_characters
new_page
end
#--------------------------------------------------------------------------
# ◎ 更換頁面處理
#--------------------------------------------------------------------------
def new_page
contents.clear
## 初始化文字描繪起點
@contents_x = 0
## 除名稱外文字右移1字符
@contents_x += Msg_FontSize+Font_Space unless @show_name
if $game_message.face_name.empty?
@face_sprite.bitmap.clear
else
name = $game_message.face_name
index = $game_message.face_index
## 獲取頭像寬度
set_face_width(name)
## 計算文字橫坐標起始
@contents_x += @face_width-16 unless @show_right
draw_msg_face(name, index)
## 頭像進入畫面
face_in
end
@contents_y = 0
@line_count = 0
@show_fast = false
@line_show_fast = false
@pause_skip = false
contents.font.color = text_color(0)
end
#--------------------------------------------------------------------------
# ◎ 換行處理
#--------------------------------------------------------------------------
def new_line
## 提前處理自定義暫停標記
set_custom_pause_pos
@contents_x = 0
unless $game_message.face_name.empty?
## 頭像顯示在左時
@contents_x = @face_width-16 unless @show_right
end
## 除名稱外文字右移1字符
@contents_x += (Msg_FontSize+Font_Space)
## 顯示名稱之後,對話內容下移 Name_SpaceY
@contents_y += Name_SpaceY if @line_count == 0 and @show_name
## 以字號為新間距
@contents_y += (Msg_FontSize+Font_Space)
@line_count += 1
@line_show_fast = false
end
#--------------------------------------------------------------------------
# ◎ 特殊文字變換
#--------------------------------------------------------------------------
def convert_special_characters
## 特定字符處理
@text.gsub!(/#\[(.*?)\]/) {@frozen_char.push($1); "\xff"}
@text.gsub!(/#\<(.*?)\>/) {""}
## 默認控制符
@text.gsub!(/\\V\[(\d+)\]/i) {$game_variables[$1.to_i]}
@text.gsub!(/\\V\[(\d+)\]/i) {$game_variables[$1.to_i]}
@text.gsub!(/\\N\[(\d+)\]/i) {$game_actors[$1.to_i].name}
@text.gsub!(/\\C\[(\d+)\]/i) {"\x01[#{$1}]"}
@text.gsub!(/\\G/) {"\x02"}
@text.gsub!(/\\\./) {"\x03"}
@text.gsub!(/\\\|/) {"\x04"}
@text.gsub!(/\\!/) {"\x05"}
@text.gsub!(/\\>/) {"\x06"}
@text.gsub!(/\\</) {"\x07"}
@text.gsub!(/\\\^/) {"\x08"}
@text.gsub!(/\\\\/) {"\\"}
## 更改不透明度
@text.gsub!(/\\O\[(\d+)\]/i) {"\x09[#{$1}]"}
## 顯示數據庫元素
@text.gsub!(/\\S\[(\d+)\]/i) {"\x0a[#{$1}]" + $data_skills[$1.to_i].name}
@text.gsub!(/\\I\[(\d+)\]/i) {"\x0b[#{$1}]" + $data_items[$1.to_i].name}
@text.gsub!(/\\W\[(\d+)\]/i) {"\x0c[#{$1}]" + $data_weapons[$1.to_i].name}
@text.gsub!(/\\A\[(\d+)\]/i) {"\x0d[#{$1}]" + $data_armors[$1.to_i].name}
## 更改字體
@text.gsub!(/\\F\[S(\d+)\]/i){"\x0e[#{$1}]"}
@text.gsub!(/\\F\[N(\d+)\]/i){"\x0f[#{$1}]"}
@text.gsub!(/\\F\[C(\d+)\]/i){"\x01[#{$1}]"}
## 16進制顏色
@text.gsub!(/\\F\[C\#([a-f0-9]+)\]/i) {"\x10[#{$1}]"}
## 字體附加效果
@text.gsub!(/\\F\[A(\d+)\]/i){"\x11[#{$1}]"}
## 自動關閉
@text.gsub!(/\\X\[(\d+)\]/i) {"\x12[#{$1}]"}
@text.gsub!(/\\X/i) {"\x13"}
## 字速控制
@text.gsub!(/\\P\[(\d+)\]/i) {"\x14[#{$1}]"}
## 提取動畫對象和 ID
@text.gsub!(/\\A\[(\S+)\,(\d+)\]/i) {"\x15[#{$1},#{$2}]"}
@text.gsub!(/\\B\[(\S+)\,(\d+)\]/i) {"\x16[#{$1},#{$2}]"}
## 切換頭像index
@text.gsub!(/\\@\[(\d+)\]/) {"\x17[#{$1}]"}
end
#--------------------------------------------------------------------------
# ◎ 設置窗體背景與位置
#--------------------------------------------------------------------------
def reset_window
@background = $game_message.background
@position = $game_message.position
if @background == 0 # 普通窗體
self.opacity = 255
else # 背景變暗、透明
self.opacity = 0
end
case @position
when 0 # 上
fh = get_face_height($game_message.face_name)
self.y = fh - self.height - Face_AdjY
self.y = 0 if self.y < 0
@gold_window.y = 360
when 1 # 中
self.y = (Graphics.height-self.height)/2
@gold_window.y = 0
when 2 # 下
self.y = Graphics.height-self.height
@gold_window.y = 0
end
end
#--------------------------------------------------------------------------
# ◎ 消息結束
#--------------------------------------------------------------------------
def terminate_message
## 選項窗體
Choice_Strip ? @choice = false : self.active = false
self.custom_pause = false
self.index = -1
@gold_window.close
@number_input_window.active = false
@number_input_window.visible = false
$game_message.main_proc.call if $game_message.main_proc != nil
$game_message.clear
## 還原自動關閉
@auto_close = nil
## 處理名稱背景條和頭像
@show_name = false
@namebar_sprite.visible = false
@face_sprite.visible = false
@face_sprite.bitmap.clear
end
#--------------------------------------------------------------------------
# ◎ 更新消息
#--------------------------------------------------------------------------
def update_message
loop do
c = @text.slice!(/./m) # 獲取下一條文字
case c
when nil # 沒有可以顯示的文字
finish_message # 更新結束
break
when "\x00" # 換行
new_line
if @line_count >= MAX_LINE # 行數為最大時
unless @text.empty? # 如果還有增加則繼續
## 等待滾動
@wait_count = MultiLinesWait
@multi_lines = true
break
end
end
when "\x01" # \C[n] (更改文字色)
@text.sub!(/\[([0-9]+)\]/, "")
contents.font.color = text_color($1.to_i)
next
when "\x02" # \G (顯示所持金)
@gold_window.refresh
@gold_window.open
when "\x03" # \. (等待 1/4 秒)
@wait_count = 15
break
when "\x04" # \| (等待 1 秒)
@wait_count = 60
break
when "\x05" # \! (等待輸入)
self.custom_pause = true
break
when "\x06" # \> (瞬間顯示 ON)
@line_show_fast = true
when "\x07" # \< (瞬間顯示 OFF)
@line_show_fast = false
when "\x08" # \^ (不等待輸入)
@pause_skip = true
## 更改不透明度的情況下
when "\x09"
@text.sub!(/\[(\d+)\]/, "")
contents.font.color.alpha = $1.to_i
## 顯示技能情況下
when "\x0a"
@text.sub!(/\[(\d+)\]/, "")
draw_icon($data_skills[$1.to_i].icon_index, @contents_x, @contents_y)
## 橫坐標增加圖標寬度
@contents_x += 24
## 顯示物品情況下
when "\x0b"
@text.sub!(/\[(\d+)\]/, "")
draw_icon($data_items[$1.to_i].icon_index, @contents_x, @contents_y)
## 橫坐標增加圖標寬度
@contents_x += 24
## 顯示武器情況下
when "\x0c"
@text.sub!(/\[(\d+)\]/, "")
draw_icon($data_weapons[$1.to_i].icon_index, @contents_x, @contents_y)
## 橫坐標增加圖標寬度
@contents_x += 24
## 顯示防具情況下
when "\x0d"
@text.sub!(/\[(\d+)\]/, "")
draw_icon($data_armors[$1.to_i].icon_index, @contents_x, @contents_y)
## 橫坐標增加圖標寬度
@contents_x += 24
## 更改字體的情況下
when "\x0e"
@text.sub!(/\[(\d+)\]/, "")
contents.font.size = $1.to_i
when "\x0f"
@text.sub!(/\[(\d+)\]/, "")
name = Font_Lib[$1.to_i]
contents.font.name = Font.exist?(name) ? name : Font.default_name
## 16進制顏色
when "\x10"
@text.sub!(/\[(\w+)\]/, "")
r,g,b = $1.scan(/../)
contents.font.color = Color.new(r.hex, g.hex, b.hex)
## 字體附加效果
when "\x11"
@text.sub!(/\[(\d+)\]/, "")
## 獲取字體附加效果
@font_adj = $1.to_i
## 自動關閉對話框的情況下
when "\x12"
@text.sub!(/\[(\d+)\]/, "")
@auto_close = $1.to_i
when "\x13"
@auto_close = AutoClose
## \P[n] (字速)
when "\x14"
@text.sub!(/\[(\d+)\]/, "")
## 獲取字體顯示速度
@speed = $1.to_i
## 顯示角色動畫
when "\x15"
@text.sub!(/\[(\S+)\,(\d+)\]/, "")
character = interpreter.get_character($1.to_i)
character.animation_id = $2.to_i unless character.nil?
next
## 顯示心情動畫
when "\x16"
@text.sub!(/\[(\S+)\,(\d+)\]/, "")
character = interpreter.get_character($1.to_i)
character.balloon_id = $2.to_i unless character.nil?
next
## 換頭像
when "\x17"
@text.sub!(/\[(\d+)\]/, "")
name = $game_message.face_name
index = $game_message.face_index = $1.to_i
draw_msg_face(name, index)
## 選擇項
when "\x18"
finish_message
break
## 特定字符處理
when "\xff"
@text.insert(0, @frozen_char.shift)
else
## 字速控制
@wait_count = GlobalSpeed
@wait_count = @speed if @speed != nil
h = contents.font.size + Font_Space
## 字體附加效果
if @font_adj & 1 != 0
contents.font.shadow = true
else
contents.font.shadow = false
end
if @font_adj & 2 != 0
contents.font.bold = true
else
contents.font.bold = false
end
if @font_adj & 4 != 0
contents.font.italic = true
else
contents.font.italic = false
end
if @font_adj & 8 != 0 ## 描邊字
color = text_color(EdgeColor)
contents.draw_edge_text(@contents_x,@contents_y,h,h,c,0,color)
elsif @font_adj & 16 != 0 ## 發光字
color = text_color(GlowColor)
contents.draw_glow_text(@contents_x,@contents_y,h,h,c,0,color)
else ## 普通字
contents.draw_text(@contents_x, @contents_y, h, h, c)
end
c_width = contents.text_size(c).width
@contents_x += c_width
end
break unless @show_fast or @line_show_fast
end
end
#--------------------------------------------------------------------------
# ◎ 消息更新結束
#--------------------------------------------------------------------------
def finish_message
if $game_message.choice_max > 0
start_choice
elsif $game_message.num_input_variable_id > 0
start_number_input
elsif @pause_skip
terminate_message
else
self.custom_pause = true
end
@wait_count = 10
@text = nil
## 臨時字速還原
@speed = nil
end
#--------------------------------------------------------------------------
# ◎ 開始選擇項
#--------------------------------------------------------------------------
def start_choice
if Choice_Strip
@choice = true
width = 0
commands = []
for i in $game_message.choice_start+1 ...$game_message.texts.size
commands.push $game_message.texts[i]
iw = contents.text_size($game_message.texts[i]).width
width = iw if width < iw
end
## 計算高度
if commands.size > Choice_MaxLines
row_max = Choice_MaxLines
else
row_max = commands.size
end
@choice_window = Window_Command.new(width+42, commands, 1, row_max)
@choice_window.contents.font = default_font
@choice_window.refresh
## 計算坐標
if @show_right
@choice_window.x = self.x
else
@choice_window.x = self.x + self.width - @choice_window.width
end
if @position == 0
@choice_window.y = self.y + self.height
else
@choice_window.y = self.y - @choice_window.height
end
else
self.active = true
self.index = 0
end
end
#--------------------------------------------------------------------------
# ◎ 開始輸入數值
#--------------------------------------------------------------------------
def start_number_input
digits_max = $game_message.num_input_digits_max
number = $game_variables[$game_message.num_input_variable_id]
@number_input_window.digits_max = digits_max
@number_input_window.number = number
if $game_message.face_name.empty?
@number_input_window.x = x
else
## 代入頭像寬度
@number_input_window.x = @show_right ? x : x + @face_width
end
@number_input_window.y = y + @contents_y
@number_input_window.active = true
@number_input_window.visible = true
@number_input_window.update
end
#--------------------------------------------------------------------------
# ◎ 更新光標 ###可能仍須增加判斷
#--------------------------------------------------------------------------
def update_cursor
if @index >= 0
if $game_message.face_name.empty?
x = 0
y = ($game_message.choice_start+@index)*(Msg_FontSize+Font_Space)
width = contents.width
else
x = @show_right ? 0 : @face_width
y = ($game_message.choice_start+@index)*(Msg_FontSize+Font_Space) +
Name_SpaceY
width = contents.width - @face_width
end
self.cursor_rect.set(x, y, width, (Msg_FontSize+Font_Space))
else
self.cursor_rect.empty
end
end
#--------------------------------------------------------------------------
# ◎ 文章顯示輸入處理
#--------------------------------------------------------------------------
def input_pause
if Input.trigger?(Input::C) or Input.trigger?(Input::B)
## 還原自定義暫停標記
self.custom_pause = false
if @text != nil and not @text.empty?
new_page if @line_count >= MAX_LINE
else
terminate_message
end
end
end
#--------------------------------------------------------------------------
# ◎ 選擇項輸入處理
#--------------------------------------------------------------------------
def input_choice
if Input.trigger?(Input::B)
if $game_message.choice_cancel_type > 0
Sound.play_cancel
$game_message.choice_proc.call($game_message.choice_cancel_type - 1)
terminate_message
end
elsif Input.trigger?(Input::C)
Sound.play_decision
## 獲取相應index
index = Choice_Strip ? @choice_window.index : self.index
$game_message.choice_proc.call(index)
terminate_message
end
## 刷新選項窗體
return unless Choice_Strip
if @choice
@choice_window.update
else
@choice_window.dispose
@choice_window = nil
end
end
#--------------------------------------------------------------------------
# ● 數值輸入處理
#--------------------------------------------------------------------------
def input_number
if Input.trigger?(Input::C)
Sound.play_decision
$game_variables[$game_message.num_input_variable_id] =
@number_input_window.number
$game_map.need_refresh = true
terminate_message
end
end
#--------------------------------------------------------------------------
# ○ 生成名稱背景條
#--------------------------------------------------------------------------
def create_namebar_sprite
@namebar_sprite = Sprite.new
@namebar_sprite.bitmap = Bitmap.new(width-Name_SpaceX, Name_FontSize+4)
## 可視性
@namebar_sprite.visible = false
## 準備參數
rect = Rect.new(Name_SpaceX,0,@namebar_sprite.width,@namebar_sprite.height)
color1 = text_color(NameBar_Color)
color2 = text_color(NameBar_Color)
color1.alpha = NameBar_Opacity
color2.alpha = 0
## 描繪漸變條
@namebar_sprite.bitmap.gradient_fill_rect(rect, color1, color2)
end
#--------------------------------------------------------------------------
# ○ 顯示名稱背景條
#--------------------------------------------------------------------------
def show_namebar_sprite
@show_name = true
return if @background == 1
## 坐標跟隨
@namebar_sprite.x = self.x
@namebar_sprite.y = self.y + 16 - 1
@namebar_sprite.z = self.z + 1
## 可視性
@namebar_sprite.visible = true
end
#--------------------------------------------------------------------------
# ○ 生成頭像
#--------------------------------------------------------------------------
def create_face_sprite
@face_sprite = Sprite.new
@face_sprite.bitmap = Bitmap.new(1,1)
@face_sprite.z = self.z + 2
@face_sprite.visible = false
@old_name = "" # 判斷頭像是否改變
@old_index = 0 # 判斷頭像是否改變
@face_enter = Face_Enter # 頭像顯示模式
end
#--------------------------------------------------------------------------
# ○ 描繪頭像
# face_name : 頭像圖像文件名
# face_index : 頭像圖像索引
#--------------------------------------------------------------------------
def draw_msg_face(face_name, face_index)
bitmap = Cache.face(face_name)
width = bitmap.width / 4
height = bitmap.height / 2
rect = Rect.new(0, 0, 0, 0)
rect.x = face_index % 4 * width
rect.y = face_index / 4 * height
rect.width = width
rect.height = height
@face_sprite.bitmap = Bitmap.new(width, height)
@face_sprite.bitmap.blt(0, 0, bitmap, rect)
@face_sprite.mirror = @show_right
end
#--------------------------------------------------------------------------
# ○ 設定頭像寬度
# face_name : 頭像圖像文件名
#--------------------------------------------------------------------------
def set_face_width(face_name)
bitmap = Cache.face(face_name)
@face_width = bitmap.width / 4
end
#--------------------------------------------------------------------------
# ○ 獲取頭像高度
# face_name : 頭像圖像文件名
#--------------------------------------------------------------------------
def get_face_height(face_name)
bitmap = Cache.face(face_name)
return bitmap.height / 2
end
#--------------------------------------------------------------------------
# ○ 頭像進入畫面
#--------------------------------------------------------------------------
def face_in
fw = @face_sprite.width
fh = @face_sprite.height
## 水平坐標
if @show_right
@face_x = self.width - fw - Face_AdjX
else
@face_x = self.x + Face_AdjX
end
@face_sprite.x = @face_x
## 垂直坐標
case Face_Align
when 0
@face_sprite.y = self.y + Face_AdjY
when 1
@face_sprite.y = self.y + (self.height - fh) / 2
when 2
@face_sprite.y = self.y + (self.height - fh) + Face_AdjY
end
case @face_enter
when 1 ## 水平趨中時
@face_sprite.x += (@show_right ? fw : -fw)
when 2 ## 漸顯時
@face_sprite.opacity = 0
end
## 可視性
@face_sprite.visible = true
end
#--------------------------------------------------------------------------
# ○ 生成自定義暫停標記
#--------------------------------------------------------------------------
def create_custom_pause
return if Pause_Custom == 0
@pause_sprite = Sprite.new
@pause_sprite.visible = false
@pause_sprite.z = self.z + 3
@pause_sprite.bitmap = Cache.system("Window_pause")
@pause_aniindex = -1
@pause_anispeed = 0
end
#--------------------------------------------------------------------------
# ○ 獲取暫停標記
#--------------------------------------------------------------------------
def custom_pause
return @custom_pause
end
#--------------------------------------------------------------------------
# ○ 更改暫停標記
#--------------------------------------------------------------------------
def custom_pause=(val)
@custom_pause = val
self.pause = val if Pause_Custom == 0
end
#--------------------------------------------------------------------------
# ○ 更新暫停標記
#--------------------------------------------------------------------------
def update_custom_pause
return if Pause_Custom == 0
@pause_sprite.visible = @custom_pause
@pause_sprite.visible = false if @pause_aniindex == -1
return if !@custom_pause
if @pause_anispeed > 0
@pause_anispeed -= 1
else
@pause_aniindex = (@pause_aniindex + 1) % Pause_AniFrm
pw = @pause_sprite.bitmap.width / Pause_AniFrm
ph = @pause_sprite.bitmap.height
@pause_sprite.src_rect.set(@pause_aniindex*pw, 0, pw, ph)
@pause_anispeed = Pause_AniCyc
end
end
#--------------------------------------------------------------------------
# ○ 設定暫停標記坐標
#--------------------------------------------------------------------------
def set_custom_pause_pos
return if Pause_Custom == 0
pw = @pause_sprite.bitmap.width / Pause_AniFrm
ph = @pause_sprite.bitmap.height
case Pause_Custom
when 1 ## 底邊居中
@pause_sprite.x = self.x + (self.width - pw)/2
@pause_sprite.y = self.y + self.height - ph
when 2 ## 右下角
@pause_sprite.x = self.x + self.width - pw
@pause_sprite.y = self.y + self.height - ph
@pause_sprite.x -= @face_width if @show_right
when 3 ## 文字後
@pause_sprite.x = self.x + @contents_x + Msg_FontSize + Font_Space
@pause_sprite.y = self.y + @contents_y + Msg_FontSize + Font_Space
end
@pause_sprite.x += Pause_AdjX
@pause_sprite.y += Pause_AdjY
end
#--------------------------------------------------------------------------
# ○ 滾動換行
#--------------------------------------------------------------------------
def scroll_line
w = self.width - 32
hm = Msg_FontSize + Font_Space
if @show_name
l = MAX_LINE - 2
hn = Name_FontSize + Font_Space + Name_SpaceY
rect = Rect.new(0, hn+hm, w, hm*l)
else
l = MAX_LINE - 1
hn = 0
rect = Rect.new(0, hm, w, hm*l)
end
## 複製位圖
buff = Bitmap.new(w, hm*l)
buff.blt(0, 0, contents, rect)
## 描繪位圖
contents.clear_rect Rect.new(0, hn, w, hm*l+hm)
contents.blt 0, hn, buff, Rect.new(0, 0, w, hm*l)
buff.dispose
@contents_y -= Msg_FontSize + Font_Space
@multi_lines = false
end
#--------------------------------------------------------------------------
# ○ 默認字體
#--------------------------------------------------------------------------
def default_font
font = Font.new(Font.default_name, Msg_FontSize)
font.shadow = Font.default_shadow
font.italic = Font.default_italic
font.color = text_color(Msg_FontColor)
font.bold = Font.default_bold
return font
end
#--------------------------------------------------------------------------
# ○ 當前解釋器
#--------------------------------------------------------------------------
def interpreter
if $game_temp.in_battle
return $game_troop.interpreter
else
return $game_map.interpreter
end
end
end
#==============================================================================
# ■ Window_Command
#==============================================================================
class Window_Command < Window_Selectable
#--------------------------------------------------------------------------
# ◎ 初始化
# width : 窗口寬
# commands : 命令字符串列表
# column_max : 列數 (2 以上橫向選擇)
# row_max : 行數 (0:與命令數一致)
# spacing : 項目橫向的空白空間
#--------------------------------------------------------------------------
def initialize(width, commands, column_max = 1, row_max = 0, spacing = 32)
line_max = (commands.size + column_max - 1) / column_max
row_max = line_max if row_max == 0
super(0, 0, width, [line_max,row_max].max * WLH + 32, spacing)
@commands = commands
@item_max = commands.size
@column_max = column_max
refresh
self.index = 0
self.height = row_max * WLH + 32
end
end
#==============================================================================
# ■ Game_Interpreter
#==============================================================================
class Game_Interpreter
#--------------------------------------------------------------------------
# ◎ 設置事件
# list : 執行內容
# event_id : 事件 ID
#--------------------------------------------------------------------------
alias msg_plus_setup setup
def setup(list, event_id = 0)
msg_plus_setup(list, event_id)
## 獲取執行列表
@list = Marshal.load(Marshal.dump list)
end
#--------------------------------------------------------------------------
# ◎ 顯示文章
#--------------------------------------------------------------------------
def command_101
unless $game_message.busy
$game_message.face_name = @params[0]
$game_message.face_index = @params[1]
$game_message.background = @params[2]
$game_message.position = @params[3]
@index += 1
loop do
case @list[@index].code
when 101 ## 對話設定
multi_lines? ? @index += 1 : break
when 401 ## 對話數據
$game_message.texts.push(@list[@index].parameters[0])
@index += 1
else
break
end
end
if @list[@index].code == 102 # 顯示選擇項
setup_choices(@list[@index].parameters)
elsif @list[@index].code == 103 # 處理數值輸入
setup_num_input(@list[@index].parameters)
end
set_message_waiting # 消息待機狀態
end
return false
end
#--------------------------------------------------------------------------
# ◎ 設置選擇項
#--------------------------------------------------------------------------
def setup_choices(params)
if FSL::Window_message_Plus::Choice_Strip &&
FSL::Window_message_Plus::Choice_MaxLines > 0
## 備重建
@modify = []
@delete = []
@cancel = 0
## 獲取合併後的command
command = @list[@index].clone
command.parameters = connect_choice(@index), @cancel
## 消息參數
$game_message.choice_start = $game_message.texts.size
$game_message.choice_max = command.parameters[0].size
$game_message.texts.push "\x18"
command.parameters[0].each{|s| $game_message.texts.push(s)}
## 重建數據
@modify.each_index do |i|
key,value = @modify[i].is_a?(Array) ? @modify[i] : [@modify[i],i]
@list[key].parameters[0] = value
end
@delete.reverse.each{|i| @list[i,1] = nil}
@list.insert(@index, command)
$game_message.choice_cancel_type = @cancel
$game_message.choice_proc = Proc.new { |n| @branch[@indent] = n }
## 推進
@index += 1
else
## 默認情況
if $game_message.texts.size <= 4 - params[0].size
$game_message.choice_start = $game_message.texts.size
$game_message.choice_max = params[0].size
for s in params[0]
$game_message.texts.push(s)
end
$game_message.choice_cancel_type = params[1]
$game_message.choice_proc = Proc.new { |n| @branch[@indent] = n }
@index += 1
end
end
end
#--------------------------------------------------------------------------
# ◎ 取消的情況下
#--------------------------------------------------------------------------
alias msg_plus_command_403 command_403
def command_403
## 合併選項時
if !@params[0].nil? && @branch[@indent] == @params[0] - 1
@branch.delete(@indent)
return true
end
msg_plus_command_403
end
#--------------------------------------------------------------------------
# ## 合併選項
#--------------------------------------------------------------------------
def connect_choice(index, result=[])
params = @list[index].parameters
indent = @list[index].indent
## 取消項
@cancel = result.size + params[1] if params[1] > 0
params[0].each{|s| result.push(s)}
@delete.push(index) ## 102
index = next_choice(index)
## 判斷合併的條件選項:滿4項;取消:非分歧
if index && params[0].size == 4 && params[1] < 5
@delete.push(index-1) ## 404
connect_choice(index, result)
else
return result
end
end
#--------------------------------------------------------------------------
# ## 下個選項
#--------------------------------------------------------------------------
def next_choice(index)
params = @list[index].parameters
indent = @list[index].indent
until @list[index+1].nil?
index += 1
if indent == @list[index].indent
case @list[index].code
when 402
@modify.push(index)
when 403
@modify.push([index,@cancel])
when 404
## 判斷合併的條件下一個同級執行項102
return @list[index+1].code == 102 ? index+1 : nil
end
end
end
end
#--------------------------------------------------------------------------
# ○ 多行模式?
#--------------------------------------------------------------------------
def multi_lines?
return false if FSL::Window_message_Plus::MultiLinesWait <= 0
return false if $game_message.face_name != @list[@index].parameters[0]
return false if $game_message.face_index != @list[@index].parameters[1]
return false if $game_message.background != @list[@index].parameters[2]
return false if $game_message.position != @list[@index].parameters[3]
return true
end
#--------------------------------------------------------------------------
# ○ 心情圖標擴展
# character_id: 角色 ID (-1 為角色、0 為本事件、除此之外為事件 ID)
# balloon_id : 心情動畫 ID (從1開始)
#--------------------------------------------------------------------------
def balloon_extend(character_id, balloon_id)
character = get_character(character_id)
if character != nil
character.balloon_id = balloon_id
end
return true
end
end
#==============================================================================
# ■ Bitmap
#==============================================================================
class Bitmap
#--------------------------------------------------------------------------
# ○ 描邊字
#--------------------------------------------------------------------------
def draw_edge_text(x, y, width, height, str, align = 0, color = nil)
font_backup = self.font.clone
self.font.color.set(color.red,color.green,color.blue) if color
self.font.shadow = false
# 描繪邊緣
self.draw_text(x-1, y-1, width, height, str, align)
self.draw_text(x-1, y+1, width, height, str, align)
self.draw_text(x+1, y-1, width, height, str, align)
self.draw_text(x+1, y+1, width, height, str, align)
self.draw_text(x, y-1, width, height, str, align)
self.draw_text(x, y+1, width, height, str, align)
self.draw_text(x-1, y, width, height, str, align)
self.draw_text(x+1, y, width, height, str, align)
# 描繪主文字
self.font.color = font_backup.color
self.draw_text(x, y, width, height, str, align)
# 還原默認字體
self.font = font_backup
end
#--------------------------------------------------------------------------
# ○ 發光字
#--------------------------------------------------------------------------
def draw_glow_text(x, y, width, height, str, align = 0, color = nil)
buff = Bitmap.new(width, height)
buff.font = self.font.clone
buff.font.shadow = false
buff.font.color.set(color.red,color.green,color.blue) if color
# 描繪邊緣
buff.draw_text(-1, -1, width, height, str, align)
buff.draw_text(-1, 1, width, height, str, align)
buff.draw_text(1, -1, width, height, str, align)
buff.draw_text(1, 1, width, height, str, align)
buff.draw_text(0, -1, width, height, str, align)
buff.draw_text(0, 1, width, height, str, align)
buff.draw_text(0-1, 0, width, height, str, align)
buff.draw_text(1, 0, width, height, str, align)
buff.blur
# 描繪主文字
buff.font.color = self.font.color
buff.draw_text(0, 0, width, height, str, align)
self.blt(x, y, buff, Rect.new(0, 0, width, height))
buff.dispose
end
#--------------------------------------------------------------------------
# ○ 多層字
#--------------------------------------------------------------------------
def draw_sedimentary_text(x, y, width, height, str, align = 0, *color)
color.unshift font.color
sheet = (font.size.to_f / color.size).ceil
buff = Bitmap.new(width, sheet)
buff.font = font.clone
max = (height - font.size)/2 > 0 ? (height - font.size)/2 : 0
min = buff.font.size < height ? buff.font.size : height
color.each_index do |i|
buff.clear
buff.font.color = color[i]
buff.draw_text(0, -i*sheet, width, min, str, align)
blt(x, y+i*sheet+max, buff, Rect.new(0, 0, width, sheet))
break if i*sheet >= height
end
end
end

复制代码

#==============================================================================
# ■ Window_Help
#------------------------------------------------------------------------------
# 原作：xuelong
# 修正：水迭澜
# 移植：禾西
#==============================================================================
class Window_Help < Window_Base
#--------------------------------------------------------------------------
# ● 定義
#--------------------------------------------------------------------------
def set
@phrase,@y= {}, 0
@scope, @parameter_type = [], []
=begin
@name_size = 名字文字大小
@size = 描述文字大小
@word = 每行的描述文字數
=end
@name_size = 18
@size = 14
@word = 11
# 不顯示的屬性與狀態 ID
@unshow_elements = []
@unshow_states = []
# 基本文字設定
@phrase[:price] = "價格"
@phrase[:elements] = "攻擊屬性&附加技能"
@phrase[:states] = "附加狀態"
@phrase[:guard_elements] = "半減属性"
@phrase[:guard_states] = "無効化狀態"
#------------------#
# 物品效果語句 #
#------------------#
@phrase[:recover] = "回复"
@phrase[:hp] = "HP"
@phrase[:mp] = "MP"
@phrase[:plus_states] = "狀態附加"
@phrase[:minus_states] = "狀態解除"
@phrase[:speed] = "速度補正"
@phrase[:consumable] = "消耗品"
@phrase[:base_damage] = "基本傷害"
#------------------#
# 特殊效果語句 #
#------------------#
@phrase[:special] = "特殊"
@phrase[:two_handed] = "両手武器"
@phrase[:fast_attack] = "回合内先制"
@phrase[:dual_attack] = "連続攻撃"
@phrase[:critical_bonus] = "會心頻発"
@phrase[:prevent_critical] = "會心防止"
@phrase[:half_mp_cost] = "消費MP半分"
@phrase[:double_exp_gain] = "取得経験値2倍"
@phrase[:auto_hp_recover] = "HP自動回復"
@phrase[:physical_attack] = "物理攻撃"
@phrase[:damage_to_mp] = "MP傷害"
@phrase[:absorb_damage] = "傷害吸収"
@phrase[:ignore_defense] = "防御力無視"
#------------------#
# 技能描述語句 #
#------------------#
@phrase[:recovery] = "回復力"
@phrase[:mp_cost] = "消耗SP"
@phrase[:hit] = "命中率"
#------------------#
# 效果範圍語句 #
#------------------#
@phrase[:scope] = "効果範囲"
@scope[0] = "特殊"
@scope[1] = "敵単体"
@scope[2] = "敵全体"
@scope[3] = "敵単体連続"
@scope[4] = "敵単体隨機"
@scope[5] = "敵二体隨機"
@scope[6] = "敵三体隨機"
@scope[7] = "味方単体"
@scope[8] = "味方全体"
@scope[9] = "味方戦闘不能（単）"
@scope[10] = "味方戦闘不能（全）"
@scope[11] = "使用者"
#------------------#
# 效果範圍語句 #
#------------------#
@parameter_type[1] = "MaxHP"
@parameter_type[2] = "MaxMP"
@parameter_type[3] = $data_system.terms.atk
@parameter_type[4] = $data_system.terms.def
@parameter_type[5] = $data_system.terms.spi
@parameter_type[6] = $data_system.terms.agi
end
#--------------------------------------------------------------------------
# ● 初始化對象
#--------------------------------------------------------------------------
def initialize
super(0, 0, 544, WLH + 32)
self.opacity = 255
self.z = 150
self.visible = false #true,false
end
#--------------------------------------------------------------------------
# ● 設置文本
# data : 窗口顯示的字符串/物品資料
# align : 對齊方式 (0..左對齊、1..中間對齊、2..右對齊)
#--------------------------------------------------------------------------
def set_text(data, align=0)
#------------------------------------------------------------------------
# ● 當資料爲文字時候
#------------------------------------------------------------------------
if data != @text or align != @align
if data.is_a?(String)
draw_string(data,align)
end
end
return if data.is_a?(String)
#------------------------------------------------------------------------
# ● 當沒有資料時候
#------------------------------------------------------------------------
if data.nil?
self.visible=false
else
self.visible=true
end
#------------------------------------------------------------------------
# ● 當資料爲物品/技能時候
#------------------------------------------------------------------------
if data != nil && @data != data
self.width = 210
self.height = 430
self.x=0
self.y=200
set
draw_data(data)
else
return
end
end
#--------------------------------------------------------------------------
# ● 更新帮助窗口
#--------------------------------------------------------------------------
def draw_string(data,align)
self.width = 544 #修正寬度
self.height = WLH + 32 #修正高度
self.x=0 #修正 x 坐標
self.y=0 #修正 y 坐標
@text = data #記錄文本資料
@align = align #記錄對齊方式
@actor = nil #清空角色資料
self.contents = Bitmap.new(width - 32, height - 32) if self.contents.nil?
self.contents.clear
self.contents.font.color = normal_color
self.contents.font.size = 20
self.contents.draw_text(4, 0, self.width - 40, 32, data, align)
self.visible = true
end
#--------------------------------------------------------------------------
# ● 更新帮助窗口
#--------------------------------------------------------------------------
def draw_data(data=@data)
self.width = 186 #修正寬度
self.height = 430 #修正高度
self.x=0 #修正 x 坐標
self.y=150 #修正 y 坐標
@data = data #記錄 data 資料
case @data
when RPG::Item
set_item_text(@data)
when RPG::Weapon, RPG::Armor
set_equipment_text(@data)
when RPG::Skill
set_skill_text(@data)
end
end
#--------------------------------------------------------------------------
# ● 修正窗口位置
#--------------------------------------------------------------------------
def set_pos(x,y,width,oy,index,column_max)
cursor_width = width / column_max - 32
xx = index % column_max * (cursor_width + WLH)
yy = index / column_max * WLH - oy
self.x=xx+x+140
self.y=yy+y+35
if self.x+self.width>544
self.x=544-self.width
end
if self.y+self.height>416
self.y=416-self.height
end
end
#------------------------------------------------------------------------
# ● 文字描繪
#------------------------------------------------------------------------
def draw_text(text, increase, move=0)
@y += increase
self.contents.font.color = Color.new(255, 255, 128, 255)#狀態說明顏色
self.contents.font.size = @size
self.contents.draw_text(0+move, @y*@size+5, text.size*6, @size, text, 0)
end
#－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－#
# 子方法
#－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－#
#--------------------------------------------------------------------------
# ● 裝備幫助窗口
#--------------------------------------------------------------------------
def set_equipment_text(equipment)
#------------------------------------------------------------------------
# ● 取得基本質料
#------------------------------------------------------------------------
#----------------------------#
# 取得屬性、狀態、說明之副本 #
#----------------------------#
element_set = equipment.element_set.clone
state_set = equipment.state_set.clone
description = equipment.description.clone
phrase = @phrase
#----------------------------#
# 過濾不顯示的屬性與狀態描述 #
#----------------------------#
element_set -= @unshow_elements
state_set -= @unshow_states
#----------------#
# 初始化數據設定 #
#----------------#
x, h, move = 0, 0, 0
#------------------#
# 取得特殊效果數據 #
#------------------#
special = []
case equipment
when RPG::Weapon
special << phrase[:two_handed] if equipment.two_handed
special << phrase[:fast_attack] if equipment.fast_attack
special << phrase[:dual_attack] if equipment.dual_attack
special << phrase[:critical_bonus] if equipment.critical_bonus
when RPG::Armor
special << phrase[:prevent_critical]if equipment.prevent_critical
special << phrase[:half_mp_cost] if equipment.half_mp_cost
special << phrase[:double_exp_gain] if equipment.double_exp_gain
special << phrase[:auto_hp_recover] if equipment.auto_hp_recover
end
#------------------------------------------------------------------------
# ● 確定背景圖片的高度
#------------------------------------------------------------------------
h += (description.size/3/@word)
h += 1 if (description.size/3%@word) > 0
now_h = h
h += 1 #價格
h += 1 unless equipment.atk.zero? #攻擊力
h += 1 unless equipment.def.zero? #防禦力
h += 1 unless equipment.spi.zero? #精神力
h += 1 unless equipment.agi.zero? #敏捷力
h += element_set.size + 1 if element_set.size > 0 #屬性
h += state_set.size + 1 if state_set.size > 0 #狀態
h += special.size + 1 if special.size > 0 #特殊效果
#------------------------------------------------------------------------
# ● 圖片顯示保證高度
#------------------------------------------------------------------------
#h = 6 + now_h if (h - now_h) < 6
#------------------------------------------------------------------------
# ● 換算高度
#------------------------------------------------------------------------
self.height = h * @size + @name_size + 32
#------------------------------------------------------------------------
# ● 生成背景
#------------------------------------------------------------------------
self.contents = Bitmap.new(self.width - 32, self.height - 32)
self.contents.clear
#------------------------------------------------------------------------
# ● 名字描繪
#------------------------------------------------------------------------
text = equipment.name
self.contents.font.color = Color.new(255, 255, 128, 255) #裝備名子顏色(normal_color)
self.contents.font.size = @name_size
if text.nil?
self.visible = false
else
self.visible = true
self.contents.draw_text(0, 0, text.size*7, @name_size, text, 0)
end
#------------------------------------------------------------------------
# ● 說明描繪
#------------------------------------------------------------------------
x = 0
@y += 1
while ((text = description.slice!(/./m)) != nil)
self.contents.font.color = normal_color
self.contents.font.size = @size
self.contents.draw_text(x*@size, @y*@size+5, @size, @size, text, 0)
x+=1
if x == @word
x=0
@y+=1
end
end
#------------------------------------------------------------------------
# ● 圖標描繪
#------------------------------------------------------------------------
#bitmap = Cache.system("Iconset")
#rect = Rect.new(equipment.icon_index % 16 * 24, equipment.icon_index / 16 * 24, 24, 24)
#self.contents.blt(0, y*size + 20, bitmap, rect, 255)
#------------------------------------------------------------------------
# ● 價格描繪
#------------------------------------------------------------------------
unless equipment.price.zero?
text = phrase[:price] + "：" + equipment.price.to_s
draw_text(text, 1, move)
end
#------------------------------------------------------------------------
# ● 攻擊力
#------------------------------------------------------------------------
unless equipment.atk.zero?
text = $data_system.terms.atk + "：" + equipment.atk.to_s
draw_text(text, 1, move)
end
#------------------------------------------------------------------------
# ● 防禦力
#------------------------------------------------------------------------
unless equipment.def.zero?
text = $data_system.terms.def + "：" + equipment.def.to_s
draw_text(text, 1, move)
end
#------------------------------------------------------------------------
# ● 精神力
#------------------------------------------------------------------------
unless equipment.spi.zero?
text = $data_system.terms.spi + "：" + equipment.spi.to_s
draw_text(text, 1, move)
end
#------------------------------------------------------------------------
# ● 敏捷力
#------------------------------------------------------------------------
unless equipment.agi.zero?
text = $data_system.terms.agi + "：" + equipment.agi.to_s
draw_text(text, 1, move)
end
#------------------------------------------------------------------------
# ● 屬性
#------------------------------------------------------------------------
if element_set.size > 0
case equipment
when RPG::Weapon
text=phrase[:elements]+"："
when RPG::Armor
text=phrase[:guard_elements]+"："
end
draw_text(text, 1, move)
element_set.each do |i|
text = $data_system.elements[i]
draw_text(text, 1, move + @size)
end
end
#------------------------------------------------------------------------
# ● 狀態
#------------------------------------------------------------------------
if state_set.size > 0
case equipment
when RPG::Weapon
text=phrase[:states]+"："
when RPG::Armor
text=phrase[:guard_states]+"："
end
draw_text(text, 1, move)
state_set.each do |i|
text = $data_states[i].name
draw_text(text, 1, move + @size)
end
end
#------------------------------------------------------------------------
# ● 特殊效果
#------------------------------------------------------------------------
if special.size > 0
text = phrase[:special]+"："
draw_text(text, 1, move)
special.each {|text| draw_text(text, 1, move + @size)}
end
end
#////////////////////////////////////////////////////////////////////////////
#--------------------------------------------------------------------------
# ● 物品幫助窗口
#--------------------------------------------------------------------------
def set_item_text(item)
#----------------------------#
# 取得屬性、狀態、說明之副本 #
#----------------------------#
description = item.description.clone
element_set = item.element_set.clone
plus_state_set = item.plus_state_set.clone
minus_state_set = item.minus_state_set.clone
# 過濾不顯示的描述
element_set -= @unshow_elements
plus_state_set -= @unshow_states
minus_state_set -= @unshow_states
# 初始化數據設定
x, h, move = 0, 0, 0
phrase = @phrase
scope = @scope
parameter_type = @parameter_type
occasion = @occasion
# 基本文字設定
#------------------#
# 取得特殊效果數據 #
#------------------#
special=[]
special << phrase[:physical_attack] if item.physical_attack #物理攻撃
special << phrase[:damage_to_mp] if item.damage_to_mp #MPにダメージ
special << phrase[:absorb_damage] if item.absorb_damage #ダメージを吸収
special << phrase[:ignore_defense] if item.ignore_defense #防御力無視
#------------------------------------------------------------------------
# ● 確定背景圖片的高度
#------------------------------------------------------------------------
h += (description.size/3/@word)
h += 1 if (description.size/3%@word) > 0
now_h = h
h += 2 #効果範囲，價格
h += 1 if item.consumable #消耗品
h += 1 unless item.speed.zero? #速度補正値
h += 1 unless item.hp_recovery_rate==0 and item.hp_recovery==0 #HP 回復
h += 1 unless item.mp_recovery_rate==0 and item.mp_recovery==0 #MP 回復
h += 1 unless item.parameter_type.zero? #能力値
h += 1 unless item.base_damage.zero? #基本ダメージ
h += element_set.size + 1 if element_set.size > 0 #屬性
h += plus_state_set.size + 1 if plus_state_set.size > 0 #附加狀態
h += minus_state_set.size + 1 if minus_state_set.size > 0 #解除狀態
h += special.size + 1 if special.size > 0 #特殊效果
#------------------------------------------------------------------------
# ● 圖片顯示保證高度
#------------------------------------------------------------------------
#h = 6 + now_h if (h - now_h) < 6
#------------------------------------------------------------------------
# ● 換算高度
#------------------------------------------------------------------------
self.height = h * @size + @name_size + 32
#------------------------------------------------------------------------
# ● 生成背景
#------------------------------------------------------------------------
self.contents = Bitmap.new(self.width - 32, self.height - 32)
self.contents.clear
#------------------------------------------------------------------------
# ● 名字描繪
#------------------------------------------------------------------------
text = item.name
self.contents.font.color = normal_color#顔色腳本
self.contents.font.size = @name_size
if text.nil?
self.visible = false
else
self.visible = true
self.contents.draw_text(0,0, text.size*7, 20, text, 0)
end
#------------------------------------------------------------------------
# ● 說明描繪
#------------------------------------------------------------------------
x = 0
@y += 1
while ((text = description.slice!(/./m)) != nil)
self.contents.font.color = normal_color
self.contents.font.size = @size
self.contents.draw_text(x*@size, @y*@size+5, @size, @size, text, 0)
x+=1
if x == @word
x = 0
@y += 1
end
end
#------------------------------------------------------------------------
# ● 圖標描繪
#------------------------------------------------------------------------
#bitmap = Cache.system("Iconset")
#rect = Rect.new(item.icon_index % 16 * 24, equipment.icon_index / 16 * 24, 24, 24)
#self.contents.blt(0, y*size + 20, bitmap, rect, 255)
#------------------------------------------------------------------------
# ● 效果範圍
#------------------------------------------------------------------------
text = phrase[:scope] +"："
draw_text(text, 1, move)
text = scope[item.scope]
draw_text(text, 1, move + @size)
#------------------------------------------------------------------------
# ● 價格
#------------------------------------------------------------------------
text = phrase[:price] +"：" + item.price.to_s
draw_text(text, 1, move)
#------------------------------------------------------------------------
# ● 消耗品
#------------------------------------------------------------------------
if item.consumable
text = phrase[:consumable]
draw_text(text, 1, move)
end
#------------------------------------------------------------------------
# ● 速度補正値
#------------------------------------------------------------------------
unless item.speed.zero?
text = phrase[:speed]
draw_text(text, 1, move)
end
#------------------------------------------------------------------------
# ● HP回復
#------------------------------------------------------------------------
unless item.hp_recovery_rate.zero? and item.hp_recovery.zero?
if item.hp_recovery_rate > 0 and item.hp_recovery > 0
text = " + "
else
text = ""
end
unless item.hp_recovery_rate.zero?
text = item.hp_recovery_rate.to_s + "%" + text
end
unless item.hp_recovery.zero?
text += item.hp_recovery.to_s
end
text = phrase[:recover] +":" + phrase[:hp] + text
draw_text(text, 1, move)
end
#------------------------------------------------------------------------
# ● SP回復
#------------------------------------------------------------------------
unless item.mp_recovery_rate.zero? and item.mp_recovery.zero?
if item.mp_recovery_rate > 0 and item.mp_recovery > 0
text = " + "
else
text = ""
end
unless item.mp_recovery_rate.zero?
text = item.mp_recovery_rate.to_s + "%" + text
end
unless item.mp_recovery.zero?
text += item.mp_recovery.to_s
end
text = phrase[:recover] +":" + phrase[:mp] + text
draw_text(text, 1, move)
end
#------------------------------------------------------------------------
# ● 能力值增加
#------------------------------------------------------------------------
unless item.parameter_type.zero?
text= parameter_type[item.parameter_type]+" +"+item.parameter_points.to_s
draw_text(text, 1, move)
end
#------------------------------------------------------------------------
# ● 基本ダメージ
#------------------------------------------------------------------------
unless item.base_damage.zero?
text = phrase[:base_damage] +"：" + item.base_damage.to_s
draw_text(text, 1, move)
end
#------------------------------------------------------------------------
# ● 屬性
#------------------------------------------------------------------------
if element_set.size > 0
text = phrase[:elements]+"："
draw_text(text, 1, move)
element_set.each do |i|
text = $data_system.elements[i]
draw_text(text, 1, move + @size)
end
end
#------------------------------------------------------------------------
# ● 添加狀態
#------------------------------------------------------------------------
unless plus_state_set.empty?
text = phrase[:plus_states]+"："
draw_text(text, 1, move)
plus_state_set.each do |i|
text = $data_states[i].name
draw_text(text, 1, move + @size)
end
end
#------------------------------------------------------------------------
# ● 解除狀態
#------------------------------------------------------------------------
unless minus_state_set.empty?
text = phrase[:minus_states]+"："
draw_text(text, 1, move)
minus_state_set.each do |i|
text = $data_states[i].name
draw_text(text, 1, move + @size)
end
end
#------------------------------------------------------------------------
# ● 特殊效果
#------------------------------------------------------------------------
if special.size > 0
text = phrase[:special]+"："
draw_text(text, 1, move)
special.each {|text| draw_text(text, 1, move + @size)}
end
end
#////////////////////////////////////////////////////////////////////////////
#--------------------------------------------------------------------------
# ● 技能帮助窗口
#--------------------------------------------------------------------------
def set_skill_text(skill)
#----------------------------#
# 取得屬性、狀態、說明之副本 #
#----------------------------#
description = skill.description.clone
element_set = skill.element_set.clone
plus_state_set = skill.plus_state_set.clone
minus_state_set = skill.minus_state_set.clone
# 過濾不顯示的描述
element_set -= @unshow_elements
plus_state_set -= @unshow_states
minus_state_set -= @unshow_states
# 初始化設定
x ,h, move = 0, 0, 0
phrase = @phrase
scope = @scope
#------------------#
# 取得特殊效果數據 #
#------------------#
special = []
special << phrase[:physical_attack] if skill.physical_attack #物理攻撃
special << phrase[:damage_to_mp] if skill.damage_to_mp #MPにダメージ
special << phrase[:absorb_damage] if skill.absorb_damage #ダメージを吸収
special << phrase[:ignore_defense] if skill.ignore_defense #防御力無視
#------------------------------------------------------------------------
# ● 確定背景圖片的高度
#------------------------------------------------------------------------
h += (description.size/3/@word)
h += 1 if (description.size/3%@word) > 0
now_h = h
h += 4 #効果範囲，消費MP，命中率
h += 1 unless skill.speed.zero? #速度補正値
h += 1 unless skill.base_damage.zero? #基本ダメージ
h += element_set.size + 1 if element_set.size > 0 #屬性
h += plus_state_set.size + 1 if plus_state_set.size > 0 #附加狀態
h += minus_state_set.size + 1 if minus_state_set.size > 0 #解除狀態
h += special.size + 1 if special.size > 0 #特殊效果
#------------------------------------------------------------------------
# ● 換算高度
#------------------------------------------------------------------------
self.height=h * @size + @name_size + 32
self.contents = Bitmap.new(self.width - 32,self.height - 32)
self.contents.clear
#------------------------------------------------------------------------
# ● 名字描述
#------------------------------------------------------------------------
text = skill.name
self.contents.font.color = Color.new(255, 255, 128, 255)
self.contents.font.size = @name_size
if text!=nil
self.visible = true
self.contents.draw_text(0,0, text.size*7, @name_size, text, 0)
else
self.visible = false
end
#------------------------------------------------------------------------
# ● 說明描述
#------------------------------------------------------------------------
x = 0
@y += 1
text = description
while ((text = description.slice!(/./m)) != nil)
self.contents.font.color = normal_color
self.contents.font.size = @size
self.contents.draw_text(x*@size, @y*@size+5, @size, @size, text, 0)
x+=1
if x==@word
x = 0
@y += 1
end
end
#------------------------------------------------------------------------
# ● 攻擊範圍
#------------------------------------------------------------------------
text = phrase[:scope] +"："
draw_text(text, 1, move)
text = scope[skill.scope]
draw_text(text, 1, move + @size)
#------------------------------------------------------------------------
# ● 基本ダメージ
#------------------------------------------------------------------------
unless skill.base_damage .zero?
text = skill.base_damage > 0 ? phrase[:base_damage] : phrase[:recovery]
text += "：" + skill.base_damage.abs.to_s
draw_text(text, 1, move)
end
#------------------------------------------------------------------------
# ● 消費SP描述
#------------------------------------------------------------------------
text = phrase[:mp_cost] +"："+ skill.mp_cost.to_s
draw_text(text, 1, move)
#------------------------------------------------------------------------
# ● 命中率描述
#------------------------------------------------------------------------
text = phrase[:hit] + "：" + skill.hit.to_s + "%"
draw_text(text, 1, move)
#------------------------------------------------------------------------
# ● 屬性
#------------------------------------------------------------------------
if element_set.size > 0
text = phrase[:elements]+"："
draw_text(text, 1, move)
element_set.each do |i|
text = $data_system.elements[i]
draw_text(text, 1, move + @size)
end
end
#------------------------------------------------------------------------
# ● 添加狀態
#------------------------------------------------------------------------
unless plus_state_set.empty?
text = phrase[:plus_states]+"："
draw_text(text, 1, move)
plus_state_set.each do |i|
text = $data_states[i].name
draw_text(text, 1, move + @size)
end
end
#------------------------------------------------------------------------
# ● 解除狀態
#------------------------------------------------------------------------
unless minus_state_set.empty?
text = phrase[:minus_states]+"："
draw_text(text, 1, move)
minus_state_set.each do |i|
text = $data_states[i].name
draw_text(text, 1, move + @size)
end
end
#------------------------------------------------------------------------
# ● 特殊效果
#------------------------------------------------------------------------
if special.size > 0
text = phrase[:special]+"："
draw_text(text, 1, move)
special.each {|text| draw_text(text, 1, move + @size)}
end
end
end
#==============================================================================
# ■ Window_Item
#------------------------------------------------------------------------------
# 　アイテム画面などで、所持アイテムの一覧を表示するウィンドウです。
#==============================================================================
class Window_Item < Window_Selectable
#--------------------------------------------------------------------------
# ● ヘルプテキスト更新
#--------------------------------------------------------------------------
def update_help
@help_window.set_text(item)
#修正窗口位置
@help_window.set_pos(self.x,self.y,self.width,self.oy,self.index,@column_max)
end
end
#==============================================================================
# ■ Window_Skill
#------------------------------------------------------------------------------
# 　スキル画面などで、使用できるスキルの一覧を表示するウィンドウです。
#==============================================================================
class Window_Skill < Window_Selectable
#--------------------------------------------------------------------------
# ● ヘルプテキスト更新
#--------------------------------------------------------------------------
def update_help
@help_window.set_text(skill)
#修正窗口位置
@help_window.set_pos(self.x,self.y,self.width,self.oy,self.index,@column_max)
end
end
#==============================================================================
# ■ Window_Equip
#------------------------------------------------------------------------------
# 　装備画面で、アクターが現在装備しているアイテムを表示するウィンドウです。
#==============================================================================
class Window_Equip < Window_Selectable
#--------------------------------------------------------------------------
# ● ヘルプテキスト更新
#--------------------------------------------------------------------------
def update_help
@help_window.set_text(item)
#修正窗口位置
@help_window.set_pos(self.x,self.y,self.width,self.oy,self.index,@column_max)
end
end
#==============================================================================
# ■ Window_ShopBuy
#------------------------------------------------------------------------------
# 　ショップ画面で、購入できる商品の一覧を表示するウィンドウです。
#==============================================================================
class Window_ShopBuy < Window_Selectable
#--------------------------------------------------------------------------
# ● ヘルプテキスト更新
#--------------------------------------------------------------------------
def update_help
@help_window.set_text(item)
#修正窗口位置
@help_window.set_pos(self.x,self.y,self.width,self.oy,self.index,@column_max)
end
end

复制代码

#==============================================================================
# 半身像对话框功能版 v 1.01 by 沉影不器
#------------------------------------------------------------------------------
# 使用说明:
# ① 此脚本可代替默认 Window_Message 全脚本
#
# ② 对话框第一行输入引号内文字"名称：",脚本会把名称提取出来美化显示
#
# ③ 默认半身像在左边显示
# 当您需要右边显示时,在第一行输入的名称之后加"@r"(大小写不限)
# 例: "拉尔夫@r："
# 请注意此时半身像将进行左右翻转显示
#
# ④ 在对话中更改字体的方法:
# \f[sX]:更改字号为X
# \f[nX]:更改字体名称为预设字体组第X号字体 (预设字体组请看参数设定)
# \f[cX]:更改字色为第X号颜色 (text_color中的定义)
#
# ⑤ 在对话中显示(技能物品武器防具)图标和名称的方法:
# \s[X]: 显示第X号技能图标和名称
# \i[X]: 显示第X号物品图标和名称
# \w[X]: 显示第X号武器图标和名称
# \a[X]: 显示第X号防具图标和名称
#
# ⑥ 在对话中更改文字不透明度的方法:
# \o[X]: 把文字不透明度更改为X (取值范围在0~255)
#
# ⑦ 指定时间后自动关闭对话框的方法:
# \x[X]: 对话框将在X帧后自动关闭
# \x: 省略参数时,将在AUTO_CLOSE帧后自动关闭 (AUTO_CLOSE在参数设定中)
#
# ⑧ 由于半身像占据文字显示宽度，您在设定文章时每行字数将减少
#
# ⑨ 参数设定在脚本第37~66行
#
# 素材要求：
# ① 按vx默认头像像素材(Graphics\Faces)的格式
# 要求所有半身像朝向一致(默认是正面偏右)
#==============================================================================
# ■ Window_Message
#==============================================================================
class Window_Message < Window_Selectable
#--------------------------------------------------------------------------
# ○ 参数设定
#--------------------------------------------------------------------------
# 预设字体组
FONT_ARRAY = ["黑体", "宋体", "仿宋_GB2312"]
# 名称条参数
NAME_FONT_NAME = 0 # 名称文字字体在预设字体组中的序号
NAME_FONT_SIZE = 20 # 名称文字字号
NAME_FONT_COLOR = 16 # 名称文字颜色
NAME_X_ADJ = 6 # 名称条宽度缩进值
NAME_Y_ADJ = 6 # 名称与对话内容之间的附加距离
NAME_BAR_COLOR = 0 # 名称背景条颜色
NAME_BAR_OPACITY = 72 # 名称背景条透明度
AUTO_ADD = true # 是否自动添加名称修饰符
SYMBOL = "【】" # AUTO_ADD有效时为名称添加的修饰符(一对)
# 半身像参数
FACE_X_ADJ = 6 # 半身像横坐标微调
FACE_Y_ADJ = -6 # 半身像纵坐标微调
# 对话框参数
MSG_FONT_NAME = 1 # 对话文字字体在预设字体组中的序号
MSG_FONT_SIZE = 18 # 对话文字字号
MSG_FONT_COLOR = 0 # 对话文字颜色
# 自动关闭
AUTO_CLOSE = 80 # 默认自动关闭时间(以帧计时)
#--------------------------------------------------------------------------
# ● 常量
#--------------------------------------------------------------------------
MAX_LINE = 4 # 最大行数
#--------------------------------------------------------------------------
# ◎ 初始化对象
#--------------------------------------------------------------------------
def initialize
height = [NAME_FONT_SIZE, MSG_FONT_SIZE].max + 2 +
( MSG_FONT_SIZE + 2) * 3 + NAME_Y_ADJ + 32
y = Graphics.height - height
super(0, y, Graphics.width, height)
self.z = 200
self.active = false
self.index = -1
self.openness = 0
@opening = false # 窗口正在打开的标志
@closing = false # 窗口正在关闭的标志
@text = nil # 已经没有可显示的文章
@contents_x = 0 # 下一条文字描绘的 X 坐标
@contents_y = 0 # 下一条文字描绘的 Y 坐标
@line_count = 0 # 现在描绘的行数
@wait_count = 0 # 等待计数
@background = 0 # 背景类型
@position = 2 # 显示位置
@show_fast = false # 快速显示标志
@line_show_fast = false # 以行为单位快速显示
@pause_skip = false # 省略等待输入标志
create_gold_window
create_number_input_window
create_back_sprite
# 半身像左右判断
@show_right = false
# 半身像宽度
@face_width = 0
# 生成名称背景条
create_namebar_sprite
# 生成半身像
create_face_sprite
# 修改默认字体
contents.font = get_font(1)
end
#--------------------------------------------------------------------------
# ● 释放
#--------------------------------------------------------------------------
def dispose
super
dispose_gold_window
dispose_number_input_window
dispose_back_sprite
end
#--------------------------------------------------------------------------
# ◎ 更新画面
#--------------------------------------------------------------------------
def update
super
update_gold_window
update_number_input_window
update_back_sprite
update_show_fast
unless @opening or @closing # 除窗口关闭以外
if @wait_count > 0 # 文章内等待中
@wait_count -= 1
elsif self.pause # 等待文章翻页待机中
input_pause
elsif self.active # 正在输入选择项
input_choice
elsif @number_input_window.visible # 正在输入数值
input_number
elsif @text != nil # 还有剩余的文章
update_message # 更新消息
elsif continue? # 继续的情况
start_message # 开始消息
open # 打开窗口
$game_message.visible = true
else # 不继续的情况
close # 关闭窗口
$game_message.visible = @closing
end
end
# 自动关闭对话框
if @auto_close != nil
if @auto_close > 0
@auto_close -= 1
else
@auto_close = nil
terminate_message
end
end
end
#--------------------------------------------------------------------------
# ◎ 生成所持金窗口
#--------------------------------------------------------------------------
def create_gold_window
@gold_window = Window_Gold.new(384, 0)
@gold_window.openness = 0
# 统一字体
@gold_window.contents.font = get_font(1)
end
#--------------------------------------------------------------------------
# ◎ 生成数值输入窗口
#--------------------------------------------------------------------------
def create_number_input_window
@number_input_window = Window_NumberInput.new
@number_input_window.visible = false
# 统一字体
@number_input_window.contents.font = get_font(1)
end
#--------------------------------------------------------------------------
# ● 生成背景活动块
#--------------------------------------------------------------------------
def create_back_sprite
@back_sprite = Sprite.new
@back_sprite.bitmap = Cache.system("MessageBack")
@back_sprite.visible = (@background == 1)
@back_sprite.z = 190
end
#--------------------------------------------------------------------------
# ● 释放所持金窗口
#--------------------------------------------------------------------------
def dispose_gold_window
@gold_window.dispose
end
#--------------------------------------------------------------------------
# ● 释放数值输入窗口
#--------------------------------------------------------------------------
def dispose_number_input_window
@number_input_window.dispose
end
#--------------------------------------------------------------------------
# ● 释放背景活动块
#--------------------------------------------------------------------------
def dispose_back_sprite
@back_sprite.dispose
end
#--------------------------------------------------------------------------
# ● 更新所持金窗口
#--------------------------------------------------------------------------
def update_gold_window
@gold_window.update
end
#--------------------------------------------------------------------------
# ● 更新数值输入窗口
#--------------------------------------------------------------------------
def update_number_input_window
@number_input_window.update
end
#--------------------------------------------------------------------------
# ● 更新背景活动块
#--------------------------------------------------------------------------
def update_back_sprite
@back_sprite.visible = (@background == 1)
@back_sprite.y = y - 16
@back_sprite.opacity = openness
@back_sprite.update
end
#--------------------------------------------------------------------------
# ● 更新快速显示标志
#--------------------------------------------------------------------------
def update_show_fast
if self.pause or self.openness < 255
@show_fast = false
elsif Input.trigger?(Input::C) and @wait_count < 2
@show_fast = true
elsif not Input.press?(Input::C)
@show_fast = false
end
if @show_fast and @wait_count > 0
@wait_count -= 1
end
end
#--------------------------------------------------------------------------
# ● 判断下一消息继续显示
#--------------------------------------------------------------------------
def continue?
return true if $game_message.num_input_variable_id > 0
return false if $game_message.texts.empty?
if self.openness > 0 and not $game_temp.in_battle
return false if @background != $game_message.background
return false if @position != $game_message.position
end
return true
end
#--------------------------------------------------------------------------
# ◎ 开始显示消息
#--------------------------------------------------------------------------
def start_message
# 重设窗口背景与位置
reset_window
# 还原半身像左右判断
@show_right = false
# 暂存消息
temp_texts = []
$game_message.texts.each {|text| temp_texts.push(text.clone)}
if temp_texts[0] != nil and temp_texts[0].include?("：")
# 半身像左右判断
if temp_texts[0].split(/@/)[1] =~ /[Rr]/
@show_right = true
temp_texts[0] = temp_texts[0].split(/@/)[0]
end
# 去冒号加修饰符(可选)
if AUTO_ADD
temp_texts[0].sub!(/\：/) { "" }
temp_texts[0] = SYMBOL[0,SYMBOL.size/2] +
temp_texts[0] + SYMBOL[SYMBOL.size/2,SYMBOL.size/2]
end
# 设定文字颜色
temp_texts[0] = "\\C[#{NAME_FONT_COLOR}]" +
temp_texts[0] + "\\C[#{MSG_FONT_COLOR}]"
# 设定文字字体
temp_texts[0] = "\\F[N#{NAME_FONT_NAME}]" +
temp_texts[0] + "\\F[N#{MSG_FONT_NAME}]"
# 显示名称背景条
show_namebar_sprite
end
@text = ""
for i in 0...temp_texts.size
@text += "　　" if i >= $game_message.choice_start
@text += temp_texts[i].clone + "\x00"
end
@item_max = $game_message.choice_max
convert_special_characters
##reset_window
new_page
end
#--------------------------------------------------------------------------
# ◎ 更换页面处理
#--------------------------------------------------------------------------
def new_page
contents.clear
# 初始化文字描绘起点
@contents_x = 0
# 除名称外文字右移1字符
@contents_x += MSG_FONT_SIZE+2 unless show_name?
if $game_message.face_name.empty?
@face_sprite.bitmap.clear
else
name = $game_message.face_name
index = $game_message.face_index
# 获取半身像宽度
get_face_width(name)
# 计算文字横坐标起始
@contents_x += @face_width-16 unless @show_right
draw_msg_face(name, index)
# 设定半身像坐标
set_face_pos
end
@contents_y = 0
@line_count = 0
@show_fast = false
@line_show_fast = false
@pause_skip = false
contents.font.color = text_color(0)
end
#--------------------------------------------------------------------------
# ◎ 换行处理
#--------------------------------------------------------------------------
def new_line
@contents_x = 0
unless $game_message.face_name.empty?
# 半身像显示在左时
@contents_x = @face_width-16 unless @show_right
end
# 除名称外文字右移1字符
@contents_x += (MSG_FONT_SIZE+2)
# 显示名称之后,对话内容下移 NAME_Y_ADJ
@contents_y += NAME_Y_ADJ if @line_count == 0 and show_name?
# 以字号为新间距
@contents_y += (MSG_FONT_SIZE+2)
@line_count += 1
@line_show_fast = false
end
#--------------------------------------------------------------------------
# ◎ 特殊文字变换
#--------------------------------------------------------------------------
def convert_special_characters
@text.gsub!(/\\V\[(\d+)\]/i) { $game_variables[$1.to_i] }
@text.gsub!(/\\V\[(\d+)\]/i) { $game_variables[$1.to_i] }
@text.gsub!(/\\N\[(\d+)\]/i) { $game_actors[$1.to_i].name }
@text.gsub!(/\\C\[(\d+)\]/i) { "\x01[#{$1}]" }
@text.gsub!(/\\G/) { "\x02" }
@text.gsub!(/\\\./) { "\x03" }
@text.gsub!(/\\\|/) { "\x04" }
@text.gsub!(/\\!/) { "\x05" }
@text.gsub!(/\\>/) { "\x06" }
@text.gsub!(/\\</) { "\x07" }
@text.gsub!(/\\\^/) { "\x08" }
@text.gsub!(/\\\\/) { "\\" }
# 更改不透明度
@text.gsub!(/\\O\[(\d+)\]/i) { "\x09[#{$1}]" }
# 显示数据库元素
@text.gsub!(/\\S\[(\d+)\]/i) { "\x10[#{$1}]" + $data_skills[$1.to_i].name }
@text.gsub!(/\\I\[(\d+)\]/i) { "\x11[#{$1}]" + $data_items[$1.to_i].name }
@text.gsub!(/\\W\[(\d+)\]/i) { "\x12[#{$1}]" + $data_weapons[$1.to_i].name }
@text.gsub!(/\\A\[(\d+)\]/i) { "\x13[#{$1}]" + $data_armors[$1.to_i].name }
# 更改字体
@text.gsub!(/\\F\[S(\d+)\]/i) { "\x14[#{$1}]" }
@text.gsub!(/\\F\[N(\d+)\]/i) { "\x15[#{$1}]" }
@text.gsub!(/\\F\[C(\d+)\]/i) { "\x16[#{$1}]" }
# 自动关闭
@text.gsub!(/\\X\[(\d+)\]/i) { "\x17[#{$1}]" }
@text.gsub!(/\\X/i) { "\x18" }
end
#--------------------------------------------------------------------------
# ◎ 设置窗口背景与位置
#--------------------------------------------------------------------------
def reset_window
@background = $game_message.background
@position = $game_message.position
if @background == 0 # 普通窗口
self.opacity = 255
else # 背景变暗、透明
self.opacity = 0
end
case @position
when 0 # 上
self.y = 0
@gold_window.y = 360
when 1 # 中
# 通过计算获取
self.y = (Graphics.height-self.height)/2
@gold_window.y = 0
when 2 # 下
# 通过计算获取
self.y = Graphics.height-self.height
@gold_window.y = 0
end
end
#--------------------------------------------------------------------------
# ◎ 消息结束
#--------------------------------------------------------------------------
def terminate_message
self.active = false
self.pause = false
self.index = -1
@gold_window.close
@number_input_window.active = false
@number_input_window.visible = false
$game_message.main_proc.call if $game_message.main_proc != nil
$game_message.clear
# 处理名称背景条和半身像
@namebar_sprite.visible = false
@face_sprite.visible = false
@face_sprite.bitmap.clear
end
#--------------------------------------------------------------------------
# ◎ 更新消息
#--------------------------------------------------------------------------
def update_message
loop do
c = @text.slice!(/./m) # 获取下一条文字
case c
when nil # 没有可以显示的文字
finish_message # 更新结束
break
when "\x00" # 换行
new_line
if @line_count >= MAX_LINE # 行数为最大时
unless @text.empty? # 如果还有增加则继续
self.pause = true # 等待输入
break
end
end
when "\x01" # \C[n] (更改文字色)
@text.sub!(/\[([0-9]+)\]/, "")
contents.font.color = text_color($1.to_i)
next
when "\x02" # \G (显示所持金)
@gold_window.refresh
@gold_window.open
when "\x03" # \. (等待 1/4 秒)
@wait_count = 15
break
when "\x04" # \| (等待 1 秒)
@wait_count = 60
break
when "\x05" # \! (等待输入)
self.pause = true
break
when "\x06" # \> (瞬间显示 ON)
@line_show_fast = true
when "\x07" # \< (瞬间显示 OFF)
@line_show_fast = false
when "\x08" # \^ (不等待输入)
@pause_skip = true
# 更改不透明度的情况下
when "\x09"
@text.sub!(/\[(\d+)\]/, "")
contents.font.color.alpha = $1.to_i
# 显示技能情况下
when "\x10"
@text.sub!(/\[(\d+)\]/, "")
draw_icon($data_skills[$1.to_i].icon_index, @contents_x, @contents_y)
# 纵坐标增加图标宽度
@contents_x += 24
# 显示物品情况下
when "\x11"
@text.sub!(/\[(\d+)\]/, "")
draw_icon($data_items[$1.to_i].icon_index, @contents_x, @contents_y)
# 纵坐标增加图标宽度
@contents_x += 24
# 显示武器情况下
when "\x12"
@text.sub!(/\[(\d+)\]/, "")
draw_icon($data_weapons[$1.to_i].icon_index, @contents_x, @contents_y)
# 纵坐标增加图标宽度
@contents_x += 24
# 显示防具情况下
when "\x13"
@text.sub!(/\[(\d+)\]/, "")
draw_icon($data_armors[$1.to_i].icon_index, @contents_x, @contents_y)
# 纵坐标增加图标宽度
@contents_x += 24
# 更改字体的情况下
when "\x14"
@text.sub!(/\[(\d+)\]/, "")
contents.font.size = $1.to_i
when "\x15"
@text.sub!(/\[(\d+)\]/, "")
contents.font.name = FONT_ARRAY[$1.to_i]
when "\x16"
@text.sub!(/\[(\d+)\]/, "")
contents.font.color = text_color($1.to_i)
# 自动关闭对话框的情况下
when "\x17"
@text.sub!(/\[(\d+)\]/, "")
@auto_close = $1.to_i
when "\x18"
@auto_close = AUTO_CLOSE
# 普通文字的情况下
else
font_height = contents.font.size + 2
contents.draw_text(@contents_x, @contents_y, 40, font_height, c)
c_width = contents.text_size(c).width
@contents_x += c_width
end
break unless @show_fast or @line_show_fast
end
end
#--------------------------------------------------------------------------
# ◎ 消息更新结束
#--------------------------------------------------------------------------
def finish_message
if $game_message.choice_max > 0
start_choice
elsif $game_message.num_input_variable_id > 0
start_number_input
elsif @pause_skip
terminate_message
else
self.pause = true
end
@wait_count = 10
@text = nil
end
#--------------------------------------------------------------------------
# ● 开始选择项
#--------------------------------------------------------------------------
def start_choice
self.active = true
self.index = 0
end
#--------------------------------------------------------------------------
# ◎ 开始输入数值
#--------------------------------------------------------------------------
def start_number_input
digits_max = $game_message.num_input_digits_max
number = $game_variables[$game_message.num_input_variable_id]
@number_input_window.digits_max = digits_max
@number_input_window.number = number
if $game_message.face_name.empty?
@number_input_window.x = x
else
# 代入半身像宽度
@number_input_window.x = x + @face_width
end
@number_input_window.y = y + @contents_y
@number_input_window.active = true
@number_input_window.visible = true
@number_input_window.update
end
#--------------------------------------------------------------------------
# ◎ 更新光标 #可能仍须增加判断
#--------------------------------------------------------------------------
def update_cursor
if @index >= 0
if $game_message.face_name.empty?
x = 0
y = ($game_message.choice_start+@index)*(MSG_FONT_SIZE+2)
width = contents.width
else
x = @show_right ? 0 : @face_width
y = ($game_message.choice_start+@index)*(MSG_FONT_SIZE+2) + NAME_Y_ADJ
width = contents.width - @face_width
end
self.cursor_rect.set(x, y, width, (MSG_FONT_SIZE+2))
else
self.cursor_rect.empty
end
end
#--------------------------------------------------------------------------
# ● 文章显示输入处理
#--------------------------------------------------------------------------
def input_pause
if Input.trigger?(Input::B) or Input.trigger?(Input::C)
self.pause = false
if @text != nil and not @text.empty?
new_page if @line_count >= MAX_LINE
else
terminate_message
end
end
end
#--------------------------------------------------------------------------
# ● 选择项输入处理
#--------------------------------------------------------------------------
def input_choice
if Input.trigger?(Input::B)
if $game_message.choice_cancel_type > 0
Sound.play_cancel
$game_message.choice_proc.call($game_message.choice_cancel_type - 1)
terminate_message
end
elsif Input.trigger?(Input::C)
Sound.play_decision
$game_message.choice_proc.call(self.index)
terminate_message
end
end
#--------------------------------------------------------------------------
# ● 数值输入处理
#--------------------------------------------------------------------------
def input_number
if Input.trigger?(Input::C)
Sound.play_decision
$game_variables[$game_message.num_input_variable_id] =
@number_input_window.number
$game_map.need_refresh = true
terminate_message
end
end
#--------------------------------------------------------------------------
# ○ 生成名称背景条
#--------------------------------------------------------------------------
def create_namebar_sprite
@namebar_sprite = Sprite.new
@namebar_sprite.bitmap = Bitmap.new(Graphics.width-NAME_X_ADJ, NAME_FONT_SIZE+4)
# 可视性
@namebar_sprite.visible = false
# 准备参数
rect = Rect.new(NAME_X_ADJ, 0, @namebar_sprite.width, @namebar_sprite.height)
color1 = text_color(NAME_BAR_COLOR)
color2 = text_color(NAME_BAR_COLOR)
color1.alpha = NAME_BAR_OPACITY
color2.alpha = 0
# 描绘渐变条
@namebar_sprite.bitmap.gradient_fill_rect(rect, color1, color2)
end
#--------------------------------------------------------------------------
# ○ 生成半身像
#--------------------------------------------------------------------------
def create_face_sprite
@face_sprite = Sprite.new
@face_sprite.bitmap = Bitmap.new(1,1)
@face_sprite.z = self.z + 2
@face_sprite.visible = false
@old_name = "" # 判断头像是否改变
@old_index = 0 # 判断头像是否改变
end
#--------------------------------------------------------------------------
# ○ 显示名称背景条
#--------------------------------------------------------------------------
def show_namebar_sprite
# 坐标跟随
@namebar_sprite.x = self.x
@namebar_sprite.y = self.y + 16 - 1
@namebar_sprite.z = self.z + 1
# 可视性
@namebar_sprite.visible = true
end
#--------------------------------------------------------------------------
# ○ 描绘半身像
# face_name : 半身像图像文件名
# face_index : 半身像图像索引
#--------------------------------------------------------------------------
def draw_msg_face(face_name, face_index)
bitmap = Cache.face(face_name)
width = bitmap.width / 4
height = bitmap.height / 2
rect = Rect.new(0, 0, 0, 0)
rect.x = face_index % 4 * width
rect.y = face_index / 4 * height
rect.width = width
rect.height = height
@face_sprite.bitmap = Bitmap.new(width, height)
@face_sprite.bitmap.blt(0, 0, bitmap, rect)
@face_sprite.mirror = @show_right
bitmap.dispose
end
#--------------------------------------------------------------------------
# ○ 是否显示名称
#--------------------------------------------------------------------------
def show_name?
return @namebar_sprite.visible
end
#--------------------------------------------------------------------------
# ○ 返回字体
# index : 编号
#--------------------------------------------------------------------------
def get_font(index)
case index
when 0
return Font.new(FONT_ARRAY[NAME_FONT_NAME], NAME_FONT_SIZE)
when 1
return Font.new(FONT_ARRAY[MSG_FONT_NAME], MSG_FONT_SIZE)
end
end
#--------------------------------------------------------------------------
# ○ 获取半身像宽度
# face_name : 半身像图像文件名
#--------------------------------------------------------------------------
def get_face_width(face_name)
bitmap = Cache.face(face_name)
@face_width = bitmap.width / 4
bitmap.dispose
end
#--------------------------------------------------------------------------
# ○ 设定半身像位置
#--------------------------------------------------------------------------
def set_face_pos
@face_sprite.y = self.y + (self.height-@face_sprite.height) + FACE_Y_ADJ
if @show_right
@face_sprite.x = self.width - @face_sprite.width - FACE_X_ADJ
else
@face_sprite.x = self.x + FACE_X_ADJ
end
# 可视性
@face_sprite.visible = true
end
end

复制代码