怎么找不到快捷建呼出存档，物品等的脚本了？ - Project1

#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================
#============================================================================
# ■ Keyboard Script
#----------------------------------------------------------------------------
# 　By: Cybersam
# Date: 25/05/05
# Version 4
#============================================================================
# 66对此脚本使用方法的说明(可能不是很准确，反正大体能用)：
#
# ★、Kboard.keyboard(键位) 返回是否按下这个键的判断。
# 比如条件分歧：Kboard.keyboard($R_Key_H)$R_Key_NUMPAD1
# 则当按下键盘H键的时候条件分歧成立
#
# ★、Kboard.keyb(键位) 当连续按住某键返回真，否则为false
# 比如条件分歧：Kboard.keyb($R_Key_U)
# 则当持续按下键盘U的时候条件分歧成立
#
# ★、Kboard.key(键位,1) 似乎可以做开关用。按下一次变为true，再按变false
#============================================================================
module Kboard
#==========================================================================
# 以下是全键盘按键列表
#--------------------------------------------------------------------------
$Rmouse_BUTTON_L = 0x01 # left mouse button
$Rmouse_BUTTON_R = 0x02 # right mouse button
$Rmouse_BUTTON_M = 0x04 # middle mouse button
$Rmouse_BUTTON_4 = 0x05 # 4th mouse button
$Rmouse_BUTTON_5 = 0x06 # 5th mouse button
#--------------------------------------------------------------------------
$R_Key_BACK = 0x08 # BACKSPACE key
$R_Key_TAB = 0x09 # TAB key
$R_Key_RETURN = 0x0D # ENTER key
$R_Key_SHIFT = 0x10 # SHIFT key
$R_Key_CTLR = 0x11 # CTLR key
$R_Key_ALT = 0x12 # ALT key
$R_Key_PAUSE = 0x13 # PAUSE key
$R_Key_CAPITAL = 0x14 # CAPS LOCK key
$R_Key_ESCAPE = 0x1B # ESC key
$R_Key_SPACE = 0x20 # SPACEBAR
$R_Key_PRIOR = 0x21 # PAGE UP key
$R_Key_NEXT = 0x22 # PAGE DOWN key
$R_Key_END = 0x23 # END key
$R_Key_HOME = 0x24 # HOME key
$R_Key_LEFT = 0x25 # LEFT ARROW key
$R_Key_UP = 0x26 # UP ARROW key
$R_Key_RIGHT = 0x27 # RIGHT ARROW key
$R_Key_DOWN = 0x28 # DOWN ARROW key
$R_Key_SELECT = 0x29 # SELECT key
$R_Key_PRINT = 0x2A # PRINT key
$R_Key_BB = 0x2B # SELECT key
$R_Key_SNAPSHOT = 0x2C # PRINT SCREEN key
$R_Key_INSERT = 0x2D # INS key
$R_Key_DELETE = 0x2E # DEL key
#--------------------------------------------------------------------------
$R_Key_0 = 0x30 # 0 key
$R_Key_1 = 0x31 # 1 key
$R_Key_2 = 0x32 # 2 key
$R_Key_3 = 0x33 # 3 key
$R_Key_4 = 0x34 # 4 key
$R_Key_5 = 0x35 # 5 key
$R_Key_6 = 0x36 # 6 key
$R_Key_7 = 0x37 # 7 key
$R_Key_8 = 0x38 # 8 key
$R_Key_9 = 0x39 # 9 key
#--------------------------------------------------------------------------
$R_Key_A = 0x41 # A key
$R_Key_B = 0x42 # B key
$R_Key_C = 0x43 # C key
$R_Key_D = 0x44 # D key
$R_Key_E = 0x45 # E key
$R_Key_F = 0x46 # F key
$R_Key_G = 0x47 # G key
$R_Key_H = 0x48 # H key
$R_Key_I = 0x49 # I key
$R_Key_J = 0x4A # J key
$R_Key_K = 0x4B # K key
$R_Key_L = 0x4C # L key
$R_Key_M = 0x4D # M key
$R_Key_N = 0x4E # N key
$R_Key_O = 0x4F # O key
$R_Key_P = 0x50 # P key
$R_Key_Q = 0x51 # Q key
$R_Key_R = 0x52 # R key
$R_Key_S = 0x53 # S key
$R_Key_T = 0x54 # T key
$R_Key_U = 0x55 # U key
$R_Key_V = 0x56 # V key
$R_Key_W = 0x57 # W key
$R_Key_X = 0x58 # X key
$R_Key_Y = 0x59 # Y key
$R_Key_Z = 0x5A # Z key
#--------------------------------------------------------------------------
$R_Key_LWIN = 0x5B # Left Windows key (Microsoft Natural keyboard)
$R_Key_RWIN = 0x5C # Right Windows key (Natural keyboard)
$R_Key_APPS = 0x5D # Applications key (Natural keyboard)
#--------------------------------------------------------------------------
$R_Key_NUMPAD0 = 0x60 # Numeric keypad 0 key
$R_Key_NUMPAD1 = 0x61 # Numeric keypad 1 key
$R_Key_NUMPAD2 = 0x62 # Numeric keypad 2 key
$R_Key_NUMPAD3 = 0x63 # Numeric keypad 3 key
$R_Key_NUMPAD4 = 0x64 # Numeric keypad 4 key
$R_Key_NUMPAD5 = 0x65 # Numeric keypad 5 key
$R_Key_NUMPAD6 = 0x66 # Numeric keypad 6 key
$R_Key_NUMPAD7 = 0x67 # Numeric keypad 7 key
$R_Key_NUMPAD8 = 0x68 # Numeric keypad 8 key
$R_Key_NUMPAD9 = 0x69 # Numeric keypad 9 key
$R_Key_MULTIPLY = 0x6A # Multiply key (*)
$R_Key_ADD = 0x6B # Add key (+)
$R_Key_SEPARATOR = 0x6C # Separator key
$R_Key_SUBTRACT = 0x6D # Subtract key (-)
$R_Key_DECIMAL = 0x6E # Decimal key
$R_Key_DIVIDE = 0x6F # Divide key (/)
#--------------------------------------------------------------------------
$R_Key_F1 = 0x70 # F1 key
$R_Key_F2 = 0x71 # F2 key
$R_Key_F3 = 0x72 # F3 key
$R_Key_F4 = 0x73 # F4 key
$R_Key_F5 = 0x74 # F5 key
$R_Key_F6 = 0x75 # F6 key
$R_Key_F7 = 0x76 # F7 key
$R_Key_F8 = 0x77 # F8 key
$R_Key_F9 = 0x78 # F9 key
$R_Key_F10 = 0x79 # F10 key
$R_Key_F11 = 0x7A # F11 key
$R_Key_F12 = 0x7B # F12 key
#--------------------------------------------------------------------------
$R_Key_NUMLOCK = 0x90 # NUM LOCK key
$R_Key_SCROLL = 0x91 # SCROLL LOCK key
#--------------------------------------------------------------------------
$R_Key_LSHIFT = 0xA0 # Left SHIFT key
$R_Key_RSHIFT = 0xA1 # Right SHIFT key
$R_Key_LCONTROL = 0xA2 # Left CONTROL key
$R_Key_RCONTROL = 0xA3 # Right CONTROL key
$R_Key_L_ALT = 0xA4 # Left ALT key
$R_Key_R_ALT = 0xA5 # Right ALT key
#--------------------------------------------------------------------------
$R_Key_SEP = 0xBC # , key
$R_Key_DASH = 0xBD # - key
$R_Key_DOTT = 0xBE # . Key
#--------------------------------------------------------------------------
$R_Key_Hash = {}
$R_Key_Repeat = {}
GetKeyState = Win32API.new("user32","GetAsyncKeyState",['I'],'I')
#--------------------------------------------------------------------------
module_function
#--------------------------------------------------------------------------
def keyb(rkey)
if GetKeyState.call(rkey) != 0
return true
end
return false
end
#--------------------------------------------------------------------------
def keyboard(rkey)
result = GetKeyState.call(rkey)
if $R_Key_Hash[rkey] == 1 and result != 0
return false
end
if result != 0
$R_Key_Hash[rkey] = 1
return true
else
$R_Key_Hash[rkey] = 0
return false
end
#GetKeyState.call(rkey) & 0x01 == 1 #
end
#--------------------------------------------------------------------------
def key(rkey, key = 0)
GetKeyboardState.call(rkey) & 0x01 == key #
end
end

复制代码

#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================
#
# 全键盘
# ★、Kboard.press?(键位) 返回是否按下这个键的判断。
# 比如条件分歧：Kboard.keyboard($R_Key_H)
# 则当按下键盘H键的时候条件分歧成立
#
# ★、Kboard.repeat?(键位) == 1 当连续按住某键返回真，否则为false
# 比如条件分歧：Kboard.keyb($R_Key_U) == 1
# 则当持续按下键盘U的时候条件分歧成立
#
# ★、Kboard.trigger?(键位,1) 似乎可以做开关用。按下一次变为true，再按变false
# 修改：夏娜
#
#============================================================================
module Kboard
#==========================================================================
# 以下是全键盘按键列表
#--------------------------------------------------------------------------
$Rmouse_BUTTON_L = 0x01 # left mouse button
$Rmouse_BUTTON_R = 0x02 # right mouse button
$Rmouse_BUTTON_M = 0x04 # middle mouse button
$Rmouse_BUTTON_4 = 0x05 # 4th mouse button
$Rmouse_BUTTON_5 = 0x06 # 5th mouse button
#--------------------------------------------------------------------------
$R_Key_BACK = 0x08 # BACKSPACE key
$R_Key_TAB = 0x09 # TAB key
$R_Key_RETURN = 0x0D # ENTER key
$R_Key_SHIFT = 0x10 # SHIFT key
$R_Key_CTLR = 0x11 # CTLR key
$R_Key_ALT = 0x12 # ALT key
$R_Key_PAUSE = 0x13 # PAUSE key
$R_Key_CAPITAL = 0x14 # CAPS LOCK key
$R_Key_ESCAPE = 0x1B # ESC key
$R_Key_SPACE = 0x20 # SPACEBAR
$R_Key_PRIOR = 0x21 # PAGE UP key
$R_Key_NEXT = 0x22 # PAGE DOWN key
$R_Key_END = 0x23 # END key
$R_Key_HOME = 0x24 # HOME key
$R_Key_LEFT = 0x25 # LEFT ARROW key
$R_Key_UP = 0x26 # UP ARROW key
$R_Key_RIGHT = 0x27 # RIGHT ARROW key
$R_Key_DOWN = 0x28 # DOWN ARROW key
$R_Key_SELECT = 0x29 # SELECT key
$R_Key_PRINT = 0x2A # PRINT key
$R_Key_SNAPSHOT = 0x2C # PRINT SCREEN key
$R_Key_INSERT = 0x2D # INS key
$R_Key_DELETE = 0x2E # DEL key
#--------------------------------------------------------------------------
$R_Key_0 = 0x30 # 0 key
$R_Key_1 = 0x31 # 1 key
$R_Key_2 = 0x32 # 2 key
$R_Key_3 = 0x33 # 3 key
$R_Key_4 = 0x34 # 4 key
$R_Key_5 = 0x35 # 5 key
$R_Key_6 = 0x36 # 6 key
$R_Key_7 = 0x37 # 7 key
$R_Key_8 = 0x38 # 8 key
$R_Key_9 = 0x39 # 9 key
#--------------------------------------------------------------------------
$R_Key_A = 0x41 # A key
$R_Key_B = 0x42 # B key
$R_Key_C = 0x43 # C key
$R_Key_D = 0x44 # D key
$R_Key_E = 0x45 # E key
$R_Key_F = 0x46 # F key
$R_Key_G = 0x47 # G key
$R_Key_H = 0x48 # H key
$R_Key_I = 0x49 # I key
$R_Key_J = 0x4A # J key
$R_Key_K = 0x4B # K key
$R_Key_L = 0x4C # L key
$R_Key_M = 0x4D # M key
$R_Key_N = 0x4E # N key
$R_Key_O = 0x4F # O key
$R_Key_P = 0x50 # P key
$R_Key_Q = 0x51 # Q key
$R_Key_R = 0x52 # R key
$R_Key_S = 0x53 # S key
$R_Key_T = 0x54 # T key
$R_Key_U = 0x55 # U key
$R_Key_V = 0x56 # V key
$R_Key_W = 0x57 # W key
$R_Key_X = 0x58 # X key
$R_Key_Y = 0x59 # Y key
$R_Key_Z = 0x5A # Z key
#--------------------------------------------------------------------------
$R_Key_LWIN = 0x5B # Left Windows key (Microsoft Natural keyboard)
$R_Key_RWIN = 0x5C # Right Windows key (Natural keyboard)
$R_Key_APPS = 0x5D # Applications key (Natural keyboard)
#--------------------------------------------------------------------------
$R_Key_NUMPAD0 = 0x60 # Numeric keypad 0 key
$R_Key_NUMPAD1 = 0x61 # Numeric keypad 1 key
$R_Key_NUMPAD2 = 0x62 # Numeric keypad 2 key
$R_Key_NUMPAD3 = 0x63 # Numeric keypad 3 key
$R_Key_NUMPAD4 = 0x64 # Numeric keypad 4 key
$R_Key_NUMPAD5 = 0x65 # Numeric keypad 5 key
$R_Key_NUMPAD6 = 0x66 # Numeric keypad 6 key
$R_Key_NUMPAD7 = 0x67 # Numeric keypad 7 key
$R_Key_NUMPAD8 = 0x68 # Numeric keypad 8 key
$R_Key_NUMPAD9 = 0x69 # Numeric keypad 9 key
$R_Key_MULTIPLY = 0x6A # Multiply key (*)
$R_Key_ADD = 0x6B # Add key (+)
$R_Key_SEPARATOR = 0x6C # Separator key
$R_Key_SUBTRACT = 0x6D # Subtract key (-)
$R_Key_DECIMAL = 0x6E # Decimal key
$R_Key_DIVIDE = 0x6F # Divide key (/)
#--------------------------------------------------------------------------
$R_Key_F1 = 0x70 # F1 key
$R_Key_F2 = 0x71 # F2 key
$R_Key_F3 = 0x72 # F3 key
$R_Key_F4 = 0x73 # F4 key
$R_Key_F5 = 0x74 # F5 key
$R_Key_F6 = 0x75 # F6 key
$R_Key_F7 = 0x76 # F7 key
$R_Key_F8 = 0x77 # F8 key
$R_Key_F9 = 0x78 # F9 key
$R_Key_F10 = 0x79 # F10 key
$R_Key_F11 = 0x7A # F11 key
$R_Key_F12 = 0x7B # F12 key
#--------------------------------------------------------------------------
$R_Key_NUMLOCK = 0x90 # NUM LOCK key
$R_Key_SCROLL = 0x91 # SCROLL LOCK key
#--------------------------------------------------------------------------
$R_Key_LSHIFT = 0xA0 # Left SHIFT key
$R_Key_RSHIFT = 0xA1 # Right SHIFT key
$R_Key_LCONTROL = 0xA2 # Left CONTROL key
$R_Key_RCONTROL = 0xA3 # Right CONTROL key
$R_Key_L_ALT = 0xA4 # Left ALT key
$R_Key_R_ALT = 0xA5 # Right ALT key
#--------------------------------------------------------------------------
$R_Key_SEP = 0xBC # , key
$R_Key_DASH = 0xBD # - key
$R_Key_DOTT = 0xBE # . Key
module_function
@R_Key_Hash = {}
@R_Key_Repeat = {}
GetKeyState = Win32API.new("user32","GetAsyncKeyState",['I'],'I')
def press?(rkey)
return GetKeyState.call(rkey) != 0
end
def repeat?(rkey)
result = GetKeyState.call(rkey)
if result != 0
if @R_Key_Repeat[rkey].nil?
@R_Key_Repeat[rkey] = 0
return true
end
@R_Key_Repeat[rkey] += 1
else
@R_Key_Repeat[rkey] = nil
@R_Key_Hash[rkey] = 0
end
if !@R_Key_Repeat[rkey].nil? and @R_Key_Repeat[rkey] > 4 # 4乃准确数字
@R_Key_Repeat[rkey] = 0
return true
else
return false
end
end
def trigger?(rkey)
result = GetKeyState.call(rkey)
if @R_Key_Hash[rkey] == 1 and result != 0
return false
end
if result != 0
@R_Key_Hash[rkey] = 1
return true
else
@R_Key_Hash[rkey] = 0
return false
end
end
end
#==============================================================================
# ■ Scene_Save
#------------------------------------------------------------------------------
# 　处理存档画面的类。
#==============================================================================
class Scene_Save2 < Scene_File
#--------------------------------------------------------------------------
# ● 初始化对像
#--------------------------------------------------------------------------
def initialize
super("要保存到这个文件吗？")
end
#--------------------------------------------------------------------------
# ● 确定时的处理
#--------------------------------------------------------------------------
def on_decision(filename)
# 演奏存档 SE
$game_system.se_play($data_system.save_se)
# 写入存档数据
file = File.open(filename, "wb")
write_save_data(file)
file.close
# 如果被事件调用
if $game_temp.save_calling
# 清除存档调用标志
$game_temp.save_calling = false
# 切换到地图画面
$scene = Scene_Map.new
return
end
# 切换到菜单画面
$scene = Scene_Menu.new(4)
end
#--------------------------------------------------------------------------
# ● 取消时的处理
#--------------------------------------------------------------------------
def on_cancel
# 演奏取消 SE
$game_system.se_play($data_system.cancel_se)
# 如果被事件调用
if $game_temp.save_calling
# 清除存档调用标志
$game_temp.save_calling = false
# 切换到地图画面
$scene = Scene_Map.new
return
end
# 切换到菜单画面
$scene = Scene_Map.new
end
#--------------------------------------------------------------------------
# ● 写入存档数据
# file : 写入用文件对像 (已经打开)
#--------------------------------------------------------------------------
def write_save_data(file)
# 生成描绘存档文件用的角色图形
characters = []
for i in 0...$game_party.actors.size
actor = $game_party.actors[i]
characters.push([actor.character_name, actor.character_hue])
end
# 写入描绘存档文件用的角色数据
Marshal.dump(characters, file)
# 写入测量游戏时间用画面计数
Marshal.dump(Graphics.frame_count, file)
# 增加 1 次存档次数
$game_system.save_count += 1
# 保存魔法编号
# (将编辑器保存的值以随机值替换)
$game_system.magic_number = $data_system.magic_number
# 写入各种游戏对像
Marshal.dump($game_system, file)
Marshal.dump($game_switches, file)
Marshal.dump($game_variables, file)
Marshal.dump($game_self_switches, file)
Marshal.dump($game_screen, file)
Marshal.dump($game_actors, file)
Marshal.dump($game_party, file)
Marshal.dump($game_troop, file)
Marshal.dump($game_map, file)
Marshal.dump($game_player, file)
end
end
#==============================================================================
# ■ Scene_Item
#------------------------------------------------------------------------------
# 　处理物品画面的类。
#==============================================================================
class Scene_Item2
#--------------------------------------------------------------------------
# ● 主处理
#--------------------------------------------------------------------------
def main
# 生成帮助窗口、物品窗口
@help_window = Window_Help.new
@item_window = Window_Item.new
# 关联帮助窗口
@item_window.help_window = @help_window
# 生成目标窗口 (设置为不可见・不活动)
@target_window = Window_Target.new
@target_window.visible = false
@target_window.active = false
# 执行过度
Graphics.transition
# 主循环
loop do
# 刷新游戏画面
Graphics.update
# 刷新输入信息
Input.update
# 刷新画面
update
# 如果画面切换就中断循环
if $scene != self
break
end
end
# 装备过渡
Graphics.freeze
# 释放窗口
@help_window.dispose
@item_window.dispose
@target_window.dispose
end
#--------------------------------------------------------------------------
# ● 刷新画面
#--------------------------------------------------------------------------
def update
# 刷新窗口
@help_window.update
@item_window.update
@target_window.update
# 物品窗口被激活的情况下: 调用 update_item
if @item_window.active
update_item
return
end
# 目标窗口被激活的情况下: 调用 update_target
if @target_window.active
update_target
return
end
end
#--------------------------------------------------------------------------
# ● 刷新画面 (物品窗口被激活的情况下)
#--------------------------------------------------------------------------
def update_item
# 按下 B 键的情况下
if Input.trigger?(Input::B)
# 演奏取消 SE
$game_system.se_play($data_system.cancel_se)
# 切换到菜单画面
$scene = Scene_Map.new
return
end
# 按下 C 键的情况下
if Input.trigger?(Input::C)
# 获取物品窗口当前选中的物品数据
@item = @item_window.item
# 不使用物品的情况下
unless @item.is_a?(RPG::Item)
# 演奏冻结 SE
$game_system.se_play($data_system.buzzer_se)
return
end
# 不能使用的情况下
unless $game_party.item_can_use?(@item.id)
# 演奏冻结 SE
$game_system.se_play($data_system.buzzer_se)
return
end
# 演奏确定 SE
$game_system.se_play($data_system.decision_se)
# 效果范围是我方的情况下
if @item.scope >= 3
# 激活目标窗口
@item_window.active = false
@target_window.x = (@item_window.index + 1) % 2 * 304
@target_window.visible = true
@target_window.active = true
# 设置效果范围 (单体/全体) 的对应光标位置
if @item.scope == 4 || @item.scope == 6
@target_window.index = -1
else
@target_window.index = 0
end
# 效果在我方以外的情况下
else
# 公共事件 ID 有效的情况下
if @item.common_event_id > 0
# 预约调用公共事件
$game_temp.common_event_id = @item.common_event_id
# 演奏物品使用时的 SE
$game_system.se_play(@item.menu_se)
# 消耗品的情况下
if @item.consumable
# 使用的物品数减 1
$game_party.lose_item(@item.id, 1)
# 再描绘物品窗口的项目
@item_window.draw_item(@item_window.index)
end
# 切换到地图画面
$scene = Scene_Map.new
return
end
end
return
end
end
#--------------------------------------------------------------------------
# ● 刷新画面 (目标窗口被激活的情况下)
#--------------------------------------------------------------------------
def update_target
# 按下 B 键的情况下
if Input.trigger?(Input::B)
# 演奏取消 SE
$game_system.se_play($data_system.cancel_se)
# 由于物品用完而不能使用的场合
unless $game_party.item_can_use?(@item.id)
# 再次生成物品窗口的内容
@item_window.refresh
end
# 删除目标窗口
@item_window.active = true
@target_window.visible = false
@target_window.active = false
return
end
# 按下 C 键的情况下
if Input.trigger?(Input::C)
# 如果物品用完的情况下
if $game_party.item_number(@item.id) == 0
# 演奏冻结 SE
$game_system.se_play($data_system.buzzer_se)
return
end
# 目标是全体的情况下
if @target_window.index == -1
# 对同伴全体应用物品使用效果
used = false
for i in $game_party.actors
used |= i.item_effect(@item)
end
end
# 目标是单体的情况下
if @target_window.index >= 0
# 对目标角色应用物品的使用效果
target = $game_party.actors[@target_window.index]
used = target.item_effect(@item)
end
# 使用物品的情况下
if used
# 演奏物品使用时的 SE
$game_system.se_play(@item.menu_se)
# 消耗品的情况下
if @item.consumable
# 使用的物品数减 1
$game_party.lose_item(@item.id, 1)
# 再描绘物品窗口的项目
@item_window.draw_item(@item_window.index)
end
# 再生成目标窗口的内容
@target_window.refresh
# 全灭的情况下
if $game_party.all_dead?
# 切换到游戏结束画面
$scene = Scene_Gameover.new
return
end
# 公共事件 ID 有效的情况下
if @item.common_event_id > 0
# 预约调用公共事件
$game_temp.common_event_id = @item.common_event_id
# 切换到地图画面
$scene = Scene_Map.new
return
end
end
# 无法使用物品的情况下
unless used
# 演奏冻结 SE
$game_system.se_play($data_system.buzzer_se)
end
return
end
end
end
class Scene_Map
#--------------------------------------------------------------------------
# ● 刷新画面
#--------------------------------------------------------------------------
alias xy_Key_update update
def update
xy_Key_update
if Kboard.press?($R_Key_K)
$scene = Scene_Save2.new
end
if Kboard.press?($R_Key_Z)
$scene = Scene_Item2.new
end
end
end

复制代码