求助YEP_X_BattleSysATB.js汉化和使用 - Project1

* @param ---ATB Settings---
* @default
*
* @param Per Tick 每帧增加的速度槽
* @desc This is how much speed is gained per tick.
* @default user.agi
*
* @param Initial Speed 初始速度槽
* @desc The speed position of the battler at the start of battle.
* This is a formula processed as an eval.
* @default 0
*
* @param Full Gauge 速度槽满值
* @desc The target speed for an ATB gauge to be full.
* This is a formula processed as an eval.
* @default Math.max(5000, BattleManager.highestBaseAgi() * 100)
*
* @param Charge Gauge 充满动作槽的时间
* @desc The wind-up time after selecting an action.
* This is a formula processed as an eval.
* @default Math.max(2000, BattleManager.highestBaseAgi() * 20)
*
* @param Pre-Emptive Bonuses 先手攻击奖励
* @desc How much of the ATB bar do you want filled up for an
* ATB pre-emptive bonus from 0 to 1.
* @default 0.8
*
* @param Surprise Bonuses 被伏击的敌方的奖励
* @desc How much of the ATB bar do you want filled up for an
* ATB surprise bonus from 0 to 1.
* @default 0.8
*
* @param ---Escape---
* @default
*
* @param Escape Ratio 逃跑率
* @desc How ATB calculates escape ratios.
* Default: 0.5 * $gameParty.agility() / $gameTroop.agility()
* @default 0.125 * $gameParty.agility() / $gameTroop.agility()
*
* @param Fail Escape Boost 逃跑率增长
* @desc Each time the player fails escape, increase the success
* rate by this much. Default: 0.1
* @default 0.025
*
* @param ---Turn---
* @default
*
* @param Full Turn 多少帧是一回合
* @desc This is how many ticks to equal a full battle turn.
* This is a formula processed as an eval.
* @default Math.min(200, BattleManager.lowestBaseAgi() * 8)
*
* @param Turn Structure 回合结构 true是时间为准 false是行动为准
* @desc Increase battler turn time-based or after action?
* Time-Based - true After Action - false
* @default false
*
* @param Flash Enemy 在敌人行动前是否闪烁
* @desc Flash enemies when they start charging their skills?
* NO - false YES - true
* @default true
*
* @param ---Rubberband---
* @default
*
* @param Enable Rubberband 开启rubberband（敏捷的自动平衡机制）
* @desc This is an auto-balance mechanic for AGI.
* Disable - false Enable - true
* @default true
*
* @param Minimum Speed 开启后的最低速度
* @desc If rubberbanding is enabled, what is the minimum
* speed increase? This is a formula.
* @default 0.5 * BattleManager.highestBaseAgi()
*
* @param Maximum Speed 开启后的最高速度
* @desc If rubberbanding is enabled, what is the maximum
* speed increase? This is a formula.
* @default 1.5 * BattleManager.highestBaseAgi()
*
* @param ---Sound---
* @default
*
* @param Ready Sound 准备行动时的声音
* @desc This is the sound played when the battler is ready.
* @default Decision1
*
* @param Ready Volume 音量
* @desc This is the volume of the ready sound.
* @default 90
*
* @param Ready Pitch 音调
* @desc This is the pitch of the ready sound.
* @default 120
*
* @param Ready Pan 左右声道
* @desc This is the pan of the ready sound.
* @default 0
*
* @param ---Options---
* @default
*
* @param ATB Speed Text atb速度文字
* @desc Text used for ATB speed in options window.
* @default ATB Speed
*
* @param Default ATB Speed 默认atb速度
* @desc Default speed at which the gauges fill up.
* 1 - slowest 10 - fastest
* @default 10
*
* @param ---Windows---
* @default
*
* @param Lock Status Window 当atb激活时，锁定状态窗口使其不移动
* @desc While ATB is active, lock the status window from moving?
* OFF - false ON - true
* @default true
*
* @param Gauge Style atb槽的样式
* @desc This is the style of the ATB gauges:
* 0 - None 1 - Under Name 2 - Right Side
* @default 1
*
* @param Gauge Text atb槽文字
* @desc If style 2 is used, this is the text displayed.
* @default Turn
*
* @param Gauge Text Align 文字的对齐方式
* @desc If style 2 is used, this is the text alignment.
* left center right
* @default center
*
* @param ATB Gauge Color 1 atb槽颜色1
* @desc The 1st gauge color of the ATB gauge as it loads up.
* @default 13
*
* @param ATB Gauge Color 2 atb槽颜色2
* @desc The 2nd gauge color of the ATB gauge as it loads up.
* @default 5
*
* @param Slow Gauge Color 1 atb慢速槽颜色1
* @desc 1st gauge color of the ATB gauge if actor is slowed.
* @default 12
*
* @param Slow Gauge Color 2 atb慢速槽颜色2
* @desc 2nd gauge color of the ATB gauge if actor is slowed.
* @default 4
*
* @param Fast Gauge Color 1 atb快速槽颜色1
* @desc 1st gauge color of the ATB gauge if actor is hasted.
* @default 26
*
* @param Fast Gauge Color 2 atb快速槽颜色2
* @desc 2nd gauge color of the ATB gauge if actor is hasted.
* @default 27
*
* @param Stop Gauge Color 1 atb停止槽颜色1
* @desc 1st gauge color of the ATB gauge if actor is stopped.
* @default 7
*
* @param Stop Gauge Color 2 atb停止槽颜色2
* @desc 2nd gauge color of the ATB gauge if actor is stopped.
* @default 8
*
* @param Full Gauge Color 1 atb满槽颜色1
* @desc The 1st gauge color of the ATB gauge when full.
* @default 14
*
* @param Full Gauge Color 2 atb满槽颜色2
* @desc The 2nd gauge color of the ATB gauge when full.
* @default 6
*
* @param Charge Gauge Color 1 atb充能槽颜色1
* @desc The 1st gauge color of the ATB gauge when charging.
* @default 2
*
* @param Charge Gauge Color 2 atb充能槽颜色2
* @desc The 2nd gauge color of the ATB gauge when charging.
* @default 10

复制代码