求教这个脚本怎么用，看不懂英文注释 - Project1

#==============================================================================
#
# ▼ Yanfly Engine Ace - Enemy Target Info v1.02
# -- Last Updated: 2012.01.01
# -- Level: Normal
# -- Requires: YEA - Ace Battle Engine v1.10+.
#
#==============================================================================
$imported = {} if $imported.nil?
$imported["YEA-EnemyTargetInfo"] = true
#==============================================================================
# ▼ Updates
# =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
# 2012.01.01 - Bug Fixed: <scan info: all> didn't work properly.
# 2011.12.30 - Bug Fixed: Crash when using Ace Battle Engine's F8 debug.
# 2011.12.29 - Started Script and Finished.
#
#==============================================================================
# ▼ Introduction
# =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
# The enemy target info window can be activated in battle to show enemy data
# at the bottom of the screen. Information can be revealed straight from the
# start or requires the player to actively reveal the information on their own
# through either defeating the enemies, using skills on them, or scanning them
# in various ways produced by the script.
#
#==============================================================================
# ▼ Instructions
# =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
# To install this script, open up your script editor and copy/paste this script
# to an open slot below ▼ Materials/素材 but above ▼ Main. Remember to save.
#
# -----------------------------------------------------------------------------
# Skill Notetags - These notetags go in the skill notebox in the database.
# -----------------------------------------------------------------------------
# <scan info: all>
# This will scan the target enemy of all properties that are shown in the
# comparison windows. Unless the enemy has a permanent hide tag, all of the
# data becomes available.
#
# <scan info: parameters>
# This will scan the target enemy's parameters and reveal them to the player
# unless the enemy has a permanent hide tag.
#
# <scan info: elements>
# This will scan the target enemy's elemental resistances and reveal them to
# the player unless the enemy has a permanent hide tag.
#
# <scan info: states>
# This will scan the target enemy's state resistances and reveal them to the
# player unless the enemy has a permanent hide tag.
#
# <scan element: x>
# <scan element: x, x>
# This will scan the target enemy's elemental resistance for element x. Insert
# multiple of these tags to scan more elements. If you have the automatic scan
# element setting on in the module, all skills and items will automatically
# scan whatever element the skill or item deals damage with innately.
#
# <scan state: x>
# <scan state: x, x>
# This will scan the target enemy's state resistance for element x. Insert
# multiple of these tags to scan more states. If you have the automatic scan
# state setting on in the module, all skills and items will automatically
# scan whatever state the skill or item inflicts innately.
#
# -----------------------------------------------------------------------------
# Item Notetags - These notetags go in the item notebox in the database.
# -----------------------------------------------------------------------------
# <scan info: all>
# This will scan the target enemy of all properties that are shown in the
# comparison windows. Unless the enemy has a permanent hide tag, all of the
# data becomes available.
#
# <scan info: parameters>
# This will scan the target enemy's parameters and reveal them to the player
# unless the enemy has a permanent hide tag.
#
# <scan info: elements>
# This will scan the target enemy's elemental resistances and reveal them to
# the player unless the enemy has a permanent hide tag.
#
# <scan info: states>
# This will scan the target enemy's state resistances and reveal them to the
# player unless the enemy has a permanent hide tag.
#
# <scan element: x>
# <scan element: x, x>
# This will scan the target enemy's elemental resistance for element x. Insert
# multiple of these tags to scan more elements. If you have the automatic scan
# element setting on in the module, all skills and items will automatically
# scan whatever element the skill or item deals damage with innately.
#
# <scan state: x>
# <scan state: x, x>
# This will scan the target enemy's state resistance for element x. Insert
# multiple of these tags to scan more states. If you have the automatic scan
# state setting on in the module, all skills and items will automatically
# scan whatever state the skill or item inflicts innately.
#
# -----------------------------------------------------------------------------
# Enemy Notetags - These notetags go in the enemies notebox in the database.
# -----------------------------------------------------------------------------
# <hide info: all>
# <show info: all>
# These notetags will set the enemy to either always hide all of their battle
# information or to always show all of their info. The tags will override
# each other if both are used simultaneously.
#
# <hide info: parameters>
# <show info: parameters>
# These notetags will set the enemy to either always hide their parameter
# information or to always show their parameter info. The tags will override
# each other if both are used simultaneously.
#
# <hide info: elements>
# <show info: elements>
# These notetags will set the enemy to either always hide their element
# information or to always show their element info. The tags will override
# each other if both are used simultaneously.
#
# <hide info: states>
# <show info: states>
# These notetags will set the enemy to either always hide their state
# information or to always show their state info. The tags will override
# each other if both are used simultaneously.
#
#==============================================================================
# ▼ Compatibility
# =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
# This script is made strictly for RPG Maker VX Ace. It is highly unlikely that
# it will run with RPG Maker VX without adjusting.
#
# This script requires Yanfly Engine Ace - Ace Battle Engine v1.10+ and the
# script must be placed under Ace Battle Engine in the script listing.
#
#==============================================================================
module YEA
module ENEMY_INFO
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# - Info Window Settings -
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# These are the general settings revolving around the info windows shown in
# battle such as the sound effect played, the button used to open up the
# menus, the page orders, and the info text.
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
INFO_SFX = RPG::SE.new("Book2", 80, 150) # SFX played for Info Window.
# Button used to toggle the Info Window. Keep in mind that L and R are
# used for moving between pages so it's best to not use those.
INFO_BUTTON = :SHIFT
# This sets the page order in which data is displayed for the player. The
# player can switch pages by pressing L or R.
PAGE_ORDER =[
:parameters,
:elements,
:states,
] # Do not remove this.
# If testplay is being used, reveal all battle information for non-hidden
# enemy information?
SHOW_DEBUG_ALL = true
# The follow adjusts the settings regarding the help window. If this
# setting is on, the the help info will be displayed.
SHOW_HELP_INFO = true
HELP_WINDOW_Y = 72 # Y location of the help window.
# This is the text displayed to let the player know how to activate and
# show the info windows.
HELP_INFO_SHOW = "\e}Press \eC[4]SHIFT\eC[0] to show target info."
# This is the text displayed to let the player know how to switch between
# pages for the info windows.
HELP_INFO_SWITCH = "\e}Press \eC[4]L\eC[0] or \eC[4]R\eC[0] to switch info."
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# - General Page Settings -
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# The general page shows the stats of the battlers. The player can compare
# and contrast the stats of both battlers relative to each other. The
# settings here adjust the font size, the text displayed if parameters are
# hidden, and whether or not to show parameters by default?
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
PARAM_FONT_SIZE = 20 # Font size used for parameters.
HIDDEN_PARAM_TEXT = "???" # Text used if parameters are hidden.
# Show the parameters by default? If false, the enemy must be defeated once
# or scanned to show the those parameters.
DEFAULT_SHOW_PARAMS = false
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# - Element Page Settings -
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# The elements page shows the elemental resistances of the battlers. The
# player can compare and contrast the resistances relative to each other.
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
ELE_FONT_SIZE = 20 # Font size used for element resistances.
HIDDEN_ELE_TEXT = "???" # Text used if element resistances are hidden.
SHOWN_ELEMENTS = [3..10] # Elements shown. Maximum of 8 can be shown.
ELEMENT_ICONS ={ # Contains element icon information.
# Element ID => Icon,
3 => 96, # Fire
4 => 97, # Ice
5 => 98, # Thunder
6 => 99, # Water
7 => 100, # Earth
8 => 101, # Wind
9 => 102, # Holy
10 => 103, # Dark
} # Do not remove this.
# Show the elemental resistances by default? If false, a skill with the
# specific element must be used on the enemy to reveal the element data if
# the AUTO_SCAN_ELEMENT setting is set to true.
DEFAULT_SHOW_ELEMENTS = false
# If this is set to true, then skills with elemental properties will
# automatically scan the specific elemental resistance of that enemy type
# when used against that enemy.
AUTO_SCAN_ELEMENT = true
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# - States Page Settings -
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# The states page shows the state resistances of the battlers. The player
# can compare and contrast the resistances relative to each other.
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
STATE_FONT_SIZE = 20 # Font size used for state resistances.
HIDDEN_STATE_TEXT = "???" # Text used if state resistances are hidden.
SHOWN_STATES = [7..14] # States shown. Maximum of 8 can be shown.
# Show the state resistances by default? If false, a skill with the
# specific state must be used on the enemy to reveal the element data if
# the AUTO_SCAN_STATES setting is set to true.
DEFAULT_SHOW_STATES = false
# If this is set to true, then skills with state applying properties will
# automatically scan the specific state resistance of that enemy type
# when used against that enemy.
AUTO_SCAN_STATES = true
end # ENEMY_INFO
end # YEA
#==============================================================================
# ▼ Editting anything past this point may potentially result in causing
# computer damage, incontinence, explosion of user's head, coma, death, and/or
# halitosis so edit at your own risk.
#==============================================================================
if $imported["YEA-BattleEngine"]
module YEA
module ENEMY_INFO
module_function
#--------------------------------------------------------------------------
# convert_integer_array
#--------------------------------------------------------------------------
def convert_integer_array(array)
result = []
array.each { |i|
case i
when Range; result |= i.to_a
when Integer; result |= [i]
end }
return result
end
#--------------------------------------------------------------------------
# converted_contants
#--------------------------------------------------------------------------
SHOWN_ELEMENTS = convert_integer_array(SHOWN_ELEMENTS)
SHOWN_STATES = convert_integer_array(SHOWN_STATES)
end # ENEMY_INFO
module REGEXP
module ENEMY
HIDE_INFO = /<(?:HIDE_INFO|hide info):[ ](.*)>/i
SHOW_INFO = /<(?:SHOW_INFO|show info):[ ](.*)>/i
end # ENEMY
module USABLEITEM
SCAN_INFO = /<(?:SCAN_INFO|scan info):[ ](.*)>/i
SCAN_ELE = /<(?:SCAN_ELE|scan ele|scan element):[ ]*(\d+(?:\s*,\s*\d+)*)>/i
SCAN_STATE = /<(?:SCAN_STATE|scan state):[ ]*(\d+(?:\s*,\s*\d+)*)>/i
end # USABLEITEM
end # REGEXP
end # YEA
#==============================================================================
# ■ Icon
#==============================================================================
module Icon
#--------------------------------------------------------------------------
# self.element
#--------------------------------------------------------------------------
def self.element(id)
return 0 unless YEA::ENEMY_INFO::ELEMENT_ICONS.include?(id)
return YEA::ENEMY_INFO::ELEMENT_ICONS[id]
end
end # Icon
#==============================================================================
# ■ Numeric
#==============================================================================
class Numeric
#--------------------------------------------------------------------------
# new method: group_digits
#--------------------------------------------------------------------------
unless $imported["YEA-CoreEngine"]
def group; return self.to_s; end
end # $imported["YEA-CoreEngine"]
end # Numeric
#==============================================================================
# ■ DataManager
#==============================================================================
module DataManager
#--------------------------------------------------------------------------
# alias method: load_database
#--------------------------------------------------------------------------
class <<self; alias load_database_eti load_database; end
def self.load_database
load_database_eti
load_notetags_etin
end
#--------------------------------------------------------------------------
# new method: load_notetags_etin
#--------------------------------------------------------------------------
def self.load_notetags_etin
groups = [$data_enemies, $data_skills, $data_items]
for group in groups
for obj in group
next if obj.nil?
obj.load_notetags_etin
end
end
end
end # DataManager
#==============================================================================
# ■ RPG::Enemy
#==============================================================================
class RPG::Enemy < RPG::BaseItem
#--------------------------------------------------------------------------
# public instance variables
#--------------------------------------------------------------------------
attr_accessor :hide_info
attr_accessor :show_info
#--------------------------------------------------------------------------
# common cache: load_notetags_etin
#--------------------------------------------------------------------------
def load_notetags_etin
@hide_info = []
@show_info = []
#---
self.note.split(/[\r\n]+/).each { |line|
case line
#---
when YEA::REGEXP::ENEMY::HIDE_INFO
case $1.upcase
when "PARAM", "PARAMETER", "PARAMETERS"
@hide_info.push(:param)
@show_info.delete(:param)
when "ELE", "ELEMENT", "ELEMENTS"
@hide_info.push(:ele)
@show_info.delete(:ele)
when "STATE", "STATES"
@hide_info.push(:state)
@show_info.delete(:state)
when "ALL"
@hide_info.push(:all)
@show_info.delete(:all)
end
#---
when YEA::REGEXP::ENEMY::SHOW_INFO
case $1.upcase
when "PARAM", "PARAMETER", "PARAMETERS"
@show_info.push(:param)
@hide_info.delete(:param)
when "ELE", "ELEMENT", "ELEMENTS"
@show_info.push(:ele)
@hide_info.delete(:ele)
when "STATE", "STATES"
@show_info.push(:state)
@hide_info.delete(:state)
when "ALL"
@show_info.push(:all)
@hide_info.delete(:all)
end
#---
end
} # self.note.split
#---
end
end # RPG::Enemy
#==============================================================================
# ■ RPG::UsableItem
#==============================================================================
class RPG::UsableItem < RPG::BaseItem
#--------------------------------------------------------------------------
# public instance variables
#--------------------------------------------------------------------------
attr_accessor :scan_info
attr_accessor :scan_ele
attr_accessor :scan_state
#--------------------------------------------------------------------------
# common cache: load_notetags_etin
#--------------------------------------------------------------------------
def load_notetags_etin
@scan_info = []
@scan_ele = []
@scan_state = []
#---
self.note.split(/[\r\n]+/).each { |line|
case line
#---
when YEA::REGEXP::USABLEITEM::SCAN_INFO
case $1.upcase
when "PARAM", "PARAMETER", "PARAMETERS"
@scan_info.push(:param)
when "ELE", "ELEMENT", "ELEMENTS"
@scan_info.push(:ele)
when "STATE", "STATES"
@scan_info.push(:state)
when "ALL"
@scan_info.push(:all)
end
#---
when YEA::REGEXP::USABLEITEM::SCAN_ELE
$1.scan(/\d+/).each { |num|
@scan_ele.push(num.to_i) if num.to_i > 0 }
when YEA::REGEXP::USABLEITEM::SCAN_STATE
$1.scan(/\d+/).each { |num|
@scan_state.push(num.to_i) if num.to_i > 0 }
#---
end
} # self.note.split
#---
@scan_ele.push(self.damage.element_id) if YEA::ENEMY_INFO::AUTO_SCAN_ELEMENT
if YEA::ENEMY_INFO::AUTO_SCAN_STATES
for effect in @effects
next unless effect.code == 21
next unless effect.data_id > 0
@scan_state.push(effect.data_id)
end
end
end
end # RPG::UsableItem
#==============================================================================
# ■ Game_System
#==============================================================================
class Game_System
#--------------------------------------------------------------------------
# alias method: initialize
#--------------------------------------------------------------------------
alias game_system_initialize_eti initialize
def initialize
game_system_initialize_eti
initialize_enemy_info_data
end
#--------------------------------------------------------------------------
# new method: initialize_enemy_info_data
#--------------------------------------------------------------------------
def initialize_enemy_info_data
@param_enemies = [] if @param_enemies.nil?
@ele_enemies = {} if @ele_enemies.nil?
@state_enemies = {} if @state_enemies.nil?
end
#--------------------------------------------------------------------------
# new method: info_param_enemies
#--------------------------------------------------------------------------
def info_param_enemies
initialize_enemy_info_data if @param_enemies.nil?
return @param_enemies
end
#--------------------------------------------------------------------------
# new method: add_info_param_enemies
#--------------------------------------------------------------------------
def add_info_param_enemies(id)
initialize_enemy_info_data if @param_enemies.nil?
@param_enemies.push(id) unless @param_enemies.include?(id)
end
#--------------------------------------------------------------------------
# new method: info_ele_enemies
#--------------------------------------------------------------------------
def info_ele_enemies(ele_id)
initialize_enemy_info_data if @ele_enemies.nil?
@ele_enemies[ele_id] = [] if @ele_enemies[ele_id].nil?
return @ele_enemies[ele_id]
end
#--------------------------------------------------------------------------
# new method: add_info_ele_enemies
#--------------------------------------------------------------------------
def add_info_ele_enemies(ele_id, id)
initialize_enemy_info_data if @ele_enemies.nil?
@ele_enemies[ele_id] = [] if @ele_enemies[ele_id].nil?
@ele_enemies[ele_id].push(id) unless @ele_enemies[ele_id].include?(id)
end
#--------------------------------------------------------------------------
# new method: info_state_enemies
#--------------------------------------------------------------------------
def info_state_enemies(state_id)
initialize_enemy_info_data if @state_enemies.nil?
@state_enemies[state_id] = [] if @state_enemies[state_id].nil?
return @state_enemies[state_id]
end
#--------------------------------------------------------------------------
# new method: add_info_state_enemies
#--------------------------------------------------------------------------
def add_info_state_enemies(state_id, id)
initialize_enemy_info_data if @state_enemies.nil?
@state_enemies[state_id] = [] if @state_enemies[state_id].nil?
@state_enemies[state_id].push(id) if !@state_enemies[state_id].include?(id)
end
end # Game_System
#==============================================================================
# ■ Game_BattlerBase
#==============================================================================
class Game_BattlerBase
#--------------------------------------------------------------------------
# new method: show_info_param?
#--------------------------------------------------------------------------
def show_info_param?
return true if YEA::ENEMY_INFO::SHOW_DEBUG_ALL && ($TEST || $BTEST)
return YEA::ENEMY_INFO::DEFAULT_SHOW_PARAMS
end
#--------------------------------------------------------------------------
# new method: show_info_element?
#--------------------------------------------------------------------------
def show_info_element?(ele_id)
return true if YEA::ENEMY_INFO::SHOW_DEBUG_ALL && ($TEST || $BTEST)
return YEA::ENEMY_INFO::DEFAULT_SHOW_ELEMENTS
end
#--------------------------------------------------------------------------
# new method: show_info_state?
#--------------------------------------------------------------------------
def show_info_state?(state_id)
return true if YEA::ENEMY_INFO::SHOW_DEBUG_ALL && ($TEST || $BTEST)
return YEA::ENEMY_INFO::DEFAULT_SHOW_STATES
end
end # Game_BattlerBase
#==============================================================================
# ■ Game_Battler
#==============================================================================
class Game_Battler < Game_BattlerBase
#--------------------------------------------------------------------------
# alias method: die
#--------------------------------------------------------------------------
alias game_battler_die_eti die
def die
game_battler_die_eti
return if actor?
$game_system.add_info_param_enemies(@enemy_id)
end
#--------------------------------------------------------------------------
# alias method: item_user_effect
#--------------------------------------------------------------------------
alias game_battler_item_user_effect_eti item_user_effect
def item_user_effect(user, item)
game_battler_item_user_effect_eti(user, item)
scan_enemy_info_effect(user, item)
end
#--------------------------------------------------------------------------
# new method: scan_enemy_info_effect
#--------------------------------------------------------------------------
def scan_enemy_info_effect(user, item)
return if self.actor?
return unless user.actor?
#---
for info in item.scan_info
case info
when :all
$game_system.add_info_param_enemies(@enemy_id)
for i in 0...$data_system.elements.size
$game_system.add_info_ele_enemies(i, @enemy_id)
end
for i in 0...$data_states.size
$game_system.add_info_state_enemies(i, @enemy_id)
end
when :param
$game_system.add_info_param_enemies(@enemy_id)
when :ele
for i in 0...$data_system.elements.size
$game_system.add_info_ele_enemies(i, @enemy_id)
end
when :state
for i in 0...$data_states.size
$game_system.add_info_state_enemies(i, @enemy_id)
end
end
end
#---
for ele_id in item.scan_ele
$game_system.add_info_ele_enemies(ele_id, @enemy_id)
end
for state_id in item.scan_state
$game_system.add_info_state_enemies(state_id, @enemy_id)
end
end
end # Game_Battler
#==============================================================================
# ■ Game_Actor
#==============================================================================
class Game_Actor < Game_Battler
#--------------------------------------------------------------------------
# new method: show_info_param?
#--------------------------------------------------------------------------
def show_info_param?
return true
end
#--------------------------------------------------------------------------
# new method: show_info_element?
#--------------------------------------------------------------------------
def show_info_element?(ele_id)
return true
end
#--------------------------------------------------------------------------
# new method: show_info_state?
#--------------------------------------------------------------------------
def show_info_state?(state_id)
return true
end
end # Game_Actor
#==============================================================================
# ■ Game_Enemy
#==============================================================================
class Game_Enemy < Game_Battler
#--------------------------------------------------------------------------
# new method: show_info_param?
#--------------------------------------------------------------------------
def show_info_param?
return false if enemy.hide_info.include?(:param)
return false if enemy.hide_info.include?(:all)
return true if enemy.show_info.include?(:param)
return true if enemy.show_info.include?(:all)
return true if $game_system.info_param_enemies.include?(@enemy_id)
return super
end
#--------------------------------------------------------------------------
# new method: show_info_element?
#--------------------------------------------------------------------------
def show_info_element?(ele_id)
return false if enemy.hide_info.include?(:ele)
return false if enemy.hide_info.include?(:all)
return true if enemy.show_info.include?(:ele)
return true if enemy.show_info.include?(:all)
return true if $game_system.info_ele_enemies(ele_id).include?(@enemy_id)
return super(ele_id)
end
#--------------------------------------------------------------------------
# new method: show_info_state?
#--------------------------------------------------------------------------
def show_info_state?(state_id)
return false if enemy.hide_info.include?(:state)
return false if enemy.hide_info.include?(:all)
return true if enemy.show_info.include?(:state)
return true if enemy.show_info.include?(:all)
return true if $game_system.info_state_enemies(state_id).include?(@enemy_id)
return super(state_id)
end
end # Game_Enemy
#==============================================================================
# ■ Window_Comparison
#==============================================================================
class Window_Comparison < Window_Base
#--------------------------------------------------------------------------
# initialize
#--------------------------------------------------------------------------
def initialize(type)
dx = type == :actor ? 0 : Graphics.width / 2
dh = fitting_height(4)
super(dx, Graphics.height - dh, Graphics.width / 2, dh)
@button = YEA::ENEMY_INFO::INFO_BUTTON
@battler = nil
@type = type
@page = 0
hide
end
#--------------------------------------------------------------------------
# update
#--------------------------------------------------------------------------
def update
super
return unless @type == :enemy
process_enemy_window_input
return unless self.visible
reveal(SceneManager.scene.enemy_window.enemy)
end
#--------------------------------------------------------------------------
# process_enemy_window_input
#--------------------------------------------------------------------------
def process_enemy_window_input
return unless SceneManager.scene_is?(Scene_Battle)
return unless SceneManager.scene.enemy_window.active
return if SceneManager.scene.enemy_window.select_all?
SceneManager.scene.toggle_enemy_info if Input.trigger?(@button)
return unless self.visible
SceneManager.scene.enemy_info_page_up if Input.trigger?(:L)
SceneManager.scene.enemy_info_page_down if Input.trigger?(:R)
end
#--------------------------------------------------------------------------
# reveal
#--------------------------------------------------------------------------
def reveal(battler)
return if @battler == battler
@battler = battler
refresh
show
end
#--------------------------------------------------------------------------
# clear
#--------------------------------------------------------------------------
def clear
@battler = nil
@page = 0
hide
end
#--------------------------------------------------------------------------
# actor
#--------------------------------------------------------------------------
def actor; return BattleManager.actor; end
#--------------------------------------------------------------------------
# enemy
#--------------------------------------------------------------------------
def enemy; return SceneManager.scene.enemy_window.enemy; end
#--------------------------------------------------------------------------
# page_up
#--------------------------------------------------------------------------
def page_up
@page = @page == 0 ? YEA::ENEMY_INFO::PAGE_ORDER.size - 1 : @page - 1
refresh
end
#--------------------------------------------------------------------------
# page_down
#--------------------------------------------------------------------------
def page_down
@page = @page == YEA::ENEMY_INFO::PAGE_ORDER.size - 1 ? 0 : @page + 1
refresh
end
#--------------------------------------------------------------------------
# refresh
#--------------------------------------------------------------------------
def refresh
contents.clear
reset_font_settings
draw_page(@page)
end
#--------------------------------------------------------------------------
# draw_page
#--------------------------------------------------------------------------
def draw_page(page_id)
return if @battler.nil?
case YEA::ENEMY_INFO::PAGE_ORDER[page_id]
when :parameters
@battler = actor if @type == :actor
draw_parameters
when :elements
@battler = enemy if @type == :actor
draw_parameters if @type == :actor
draw_elements if @type == :enemy
when :states
@battler = enemy if @type == :actor
draw_parameters if @type == :actor
draw_states if @type == :enemy
end
end
#--------------------------------------------------------------------------
# draw_parameters
#--------------------------------------------------------------------------
def draw_parameters
draw_text(4, 0, contents.width, line_height, @battler.name)
dx = contents.width / 2
contents.font.size = YEA::ENEMY_INFO::PARAM_FONT_SIZE
draw_param(2, 0, line_height*1); draw_param(3, dx, line_height*1)
draw_param(4, 0, line_height*2); draw_param(5, dx, line_height*2)
draw_param(6, 0, line_height*3); draw_param(7, dx, line_height*3)
end
#--------------------------------------------------------------------------
# draw_param
#--------------------------------------------------------------------------
def draw_param(param_id, dx, dy)
dw = contents.width / 2
colour = Color.new(0, 0, 0, translucent_alpha/2)
rect = Rect.new(dx+1, dy+1, dw - 2, line_height - 2)
contents.fill_rect(rect, colour)
#---
change_color(system_color)
draw_text(dx+4, dy, dw-8, line_height, Vocab::param(param_id))
change_color(normal_color)
if @battler.show_info_param?
text = @battler.param(param_id).group
else
text = YEA::ENEMY_INFO::HIDDEN_PARAM_TEXT
end
draw_text(dx+4, dy, dw-8, line_height, text, 2)
end
#--------------------------------------------------------------------------
# draw_elements
#--------------------------------------------------------------------------
def draw_elements
dx = 0; dy = 0
contents.font.size = YEA::ENEMY_INFO::ELE_FONT_SIZE
for ele_id in YEA::ENEMY_INFO::SHOWN_ELEMENTS
draw_element_info(ele_id, dx, dy)
dx = dx == 0 ? contents.width / 2 : 0
dy += dx == 0 ? line_height : 0
end
end
#--------------------------------------------------------------------------
# draw_element_info
#--------------------------------------------------------------------------
def draw_element_info(ele_id, dx, dy)
dw = contents.width / 2
colour = Color.new(0, 0, 0, translucent_alpha/2)
rect = Rect.new(dx+1, dy+1, dw - 2, line_height - 2)
contents.fill_rect(rect, colour)
#---
draw_icon(Icon.element(ele_id), dx, dy)
change_color(system_color)
draw_text(dx+24, dy, dw-24, line_height, $data_system.elements[ele_id])
change_color(normal_color)
if @battler.show_info_element?(ele_id)
text = sprintf("%d%%", (@battler.element_rate(ele_id) * 100).to_i)
else
text = YEA::ENEMY_INFO::HIDDEN_ELE_TEXT
end
draw_text(dx+4, dy, dw-8, line_height, text, 2)
end
#--------------------------------------------------------------------------
# draw_states
#--------------------------------------------------------------------------
def draw_states
dx = 0; dy = 0
contents.font.size = YEA::ENEMY_INFO::ELE_FONT_SIZE
for state_id in YEA::ENEMY_INFO::SHOWN_STATES
draw_state_info(state_id, dx, dy)
dx = dx == 0 ? contents.width / 2 : 0
dy += dx == 0 ? line_height : 0
end
end
#--------------------------------------------------------------------------
# draw_state_info
#--------------------------------------------------------------------------
def draw_state_info(state_id, dx, dy)
dw = contents.width / 2
colour = Color.new(0, 0, 0, translucent_alpha/2)
rect = Rect.new(dx+1, dy+1, dw - 2, line_height - 2)
contents.fill_rect(rect, colour)
#---
draw_icon($data_states[state_id].icon_index, dx, dy)
change_color(system_color)
draw_text(dx+24, dy, dw-24, line_height, $data_states[state_id].name)
change_color(normal_color)
if @battler.show_info_state?(state_id)
text = sprintf("%d%%", (@battler.state_rate(state_id) * 100).to_i)
else
text = YEA::ENEMY_INFO::HIDDEN_STATE_TEXT
end
draw_text(dx+4, dy, dw-8, line_height, text, 2)
end
end # Window_Comparison
#==============================================================================
# ■ Window_ComparisonHelp
#==============================================================================
class Window_ComparisonHelp < Window_Base
#--------------------------------------------------------------------------
# initialize
#--------------------------------------------------------------------------
def initialize(info_window)
dy = YEA::ENEMY_INFO::HELP_WINDOW_Y
super(-12, dy, Graphics.width + 24, fitting_height(1))
@info_window = info_window
self.opacity = 0
self.z = 300
@text = ""
hide
end
#--------------------------------------------------------------------------
# update
#--------------------------------------------------------------------------
def update
super
return unless YEA::ENEMY_INFO::SHOW_HELP_INFO
update_visibility
update_text
end
#--------------------------------------------------------------------------
# update_visibility
#--------------------------------------------------------------------------
def update_visibility
return unless SceneManager.scene_is?(Scene_Battle)
return if SceneManager.scene.enemy_window.select_all?
self.visible = SceneManager.scene.enemy_window.active
end
#--------------------------------------------------------------------------
# update_text
#--------------------------------------------------------------------------
def update_text
return unless self.visible
if @info_window.visible
text = YEA::ENEMY_INFO::HELP_INFO_SWITCH
else
text = YEA::ENEMY_INFO::HELP_INFO_SHOW
end
return if @text == text
@text = text
refresh
end
#--------------------------------------------------------------------------
# refresh
#--------------------------------------------------------------------------
def refresh
contents.clear
reset_font_settings
draw_background
draw_text_ex(4, 0, @text)
end
#--------------------------------------------------------------------------
# draw_background
#--------------------------------------------------------------------------
def draw_background
temp_rect = Rect.new(0, 0, contents.width / 2, contents.height)
colour1 = Color.new(0, 0, 0, 192)
colour2 = Color.new(0, 0, 0, 0)
contents.gradient_fill_rect(temp_rect, colour1, colour2)
end
end # Window_ComparisonHelp
#==============================================================================
# ■ Scene_Battle
#==============================================================================
class Scene_Battle < Scene_Base
#--------------------------------------------------------------------------
# alias method: create_all_windows
#--------------------------------------------------------------------------
alias scene_battle_create_all_windows_eti create_all_windows
def create_all_windows
scene_battle_create_all_windows_eti
create_comparison_windows
end
#--------------------------------------------------------------------------
# alias method: create_comparison_windows
#--------------------------------------------------------------------------
def create_comparison_windows
@actor_info_window = Window_Comparison.new(:actor)
@enemy_info_window = Window_Comparison.new(:enemy)
@info_help_window = Window_ComparisonHelp.new(@enemy_info_window)
end
#--------------------------------------------------------------------------
# new method: toggle_enemy_info
#--------------------------------------------------------------------------
def toggle_enemy_info
YEA::ENEMY_INFO::INFO_SFX.play
if @enemy_info_window.visible
hide_comparison_windows
else
show_comparison_windows
end
end
#--------------------------------------------------------------------------
# new method: enemy_info_page_up
#--------------------------------------------------------------------------
def enemy_info_page_up
YEA::ENEMY_INFO::INFO_SFX.play
@actor_info_window.page_up
@enemy_info_window.page_up
end
#--------------------------------------------------------------------------
# new method: enemy_info_page_down
#--------------------------------------------------------------------------
def enemy_info_page_down
YEA::ENEMY_INFO::INFO_SFX.play
@actor_info_window.page_down
@enemy_info_window.page_down
end
#--------------------------------------------------------------------------
# alias method: on_enemy_ok
#--------------------------------------------------------------------------
alias scene_battle_on_enemy_ok_eti on_enemy_ok
def on_enemy_ok
hide_comparison_windows
scene_battle_on_enemy_ok_eti
end
#--------------------------------------------------------------------------
# alias method: on_enemy_cancel
#--------------------------------------------------------------------------
alias scene_battle_on_enemy_cancel_eti on_enemy_cancel
def on_enemy_cancel
hide_comparison_windows
scene_battle_on_enemy_cancel_eti
end
#--------------------------------------------------------------------------
# new method: show_comparison_windows
#--------------------------------------------------------------------------
def show_comparison_windows
@actor_info_window.reveal(BattleManager.actor)
@enemy_info_window.reveal(@enemy_window.enemy)
@info_viewport.visible = false
@skill_window.y = Graphics.height * 2
@item_window.y = Graphics.height * 2
@status_aid_window.y = Graphics.height * 2
end
#--------------------------------------------------------------------------
# new method: hide_comparison_windows
#--------------------------------------------------------------------------
def hide_comparison_windows
@actor_info_window.clear
@enemy_info_window.clear
@info_viewport.visible = true
@skill_window.y = Graphics.height - @skill_window.height
@item_window.y = Graphics.height - @item_window.height
@status_aid_window.y = Graphics.height - @status_aid_window.height
end
end # Scene_Battle
end # $imported["YEA-BattleEngine"]
#==============================================================================
#
# ▼ End of File
#
#==============================================================================

复制代码