Project1

标题: 怎么样让葱式菜单的存档脚本失效，换成其他的。 [打印本页]
作者: 最初の結果    时间: 2021-2-15 17:53
标题: 怎么样让葱式菜单的存档脚本失效，换成其他的。
就是说想要让葱式菜单自带的截图存档失效，换成下面这个截图存档，看一下图片，就是不要图片上这种存档模式，而是像这个截图脚本所述的那种。

[pre lang="ruby" file="截图存档"]#==============================================================================
# [PS0]截图存档
#      Window_SaveFile_Plus
#------------------------------------------------------------------------------
# 　   一种带有截图的存档，同时可以自定义存档数量。
#==============================================================================
# [核心脚本]
#    - 快速储存Bitmap的Marshal         By 柳之一
#------------------------------------------------------------------------------
# [更新记录]
#    - 2012.02.16 By 各种压力的猫君
#      * 修正地图边缘时截图不完整的错误
#    - 2012.01.28 By 各种压力的猫君
#      * 去掉效率较差的双线性缩放算法;
#      * 新增存档管理功能（F5键，复制/移动/删除存档）
#    - 2011.12.27 By 各种压力的猫君
#      * 补上截图阴影；
#      * 新增“不缩放”截图（推荐使用，尤其是大分辨率）；
#      * 修正选择不存在的存档时存档列表窗口卡死以及奇怪的SE；
#      * 新增“存档中”提示窗口、覆盖存档提示、删除存档功能(Z键，对应键盘D)
#    - 2011.12.26 By 各种压力的猫君
#      * 功能齐全的测试版
#    - 2011.12.16 By 各种压力的猫君
#      * 移植至RGSS3，遵循PS0协议；
#      * 丰富自定义选项，整合双线性插值算法精简版
#    - 2008.05.26 By 沉影不器
#      * 蓝本（VX新截图存档）
#------------------------------------------------------------------------------
# [使用方法]
#    - 删除原Scene_File、Window_SaveFile 并将本脚本插入到原Scene_File位置。
#    - 或者直接将本脚本插入到MAIN以上，并确保本脚本位于上述两个脚本以下。
#==============================================================================
$_PS0 = {} if $_PS0 == nil  
$_PS0["Window_SaveFile_Plus"] = 20120216
#==============================================================================
# [PS0] 通用配置模块  
#==============================================================================
module PS0
  module Window_SaveFile_Plus

    # 最大存档数（范围正整数）
    MAX_SAVE = 20

    # 存档目录（默认值 "Saves/"；根目录 ""）
    SAVE_DIR = "Saves/"   

    # 无存档时显示的文字
    NO_DATA  = "无存档"

    # 保存时显示的信息
    SAVE_NOW = "存档中..."

    # 复制存档时的帮助文字
    HELP_COPY = "要复制到哪个位置？"

    # 移动存档时的帮助文字
    HELP_MOVE = "要移动到哪个位置？"

    # 是否显示存档中窗口（true:显示；false:不显示）
    # - 分辨率较大时建议显示
    SHOW_SAVE_NOW = false

    # 截图缩放使用的插值算法
    # - "NN" 最邻近（速度最快，质量最差，RM默认算法）
    # - "NZ" 不缩放（速度快，质量好，以主角为中心切边，非全屏）
    Zoom_Type = "NZ"

    # 双线性插值能获得更好的截图缩放质量，但所需时间较最邻近插值更长。
    # 缩略图尺寸（范围整数，单位像素）
    # - VA默认分辨率（544×416）推荐使用340×260
    # - VA最大分辨率（640×480）推荐使用425×325
    # - 本脚本兼容分辨率解放，窗口大小将自动计算。
    #   请自行计算截图分辨率，注意要确保宽高比一致，
    #   若使用“不缩放”模式则可以不保持一致。
    Thumbnail_Width  = 340  # 宽度
    Thumbnail_Height = 260  # 高度

    # 缩略图位置微调（范围整数，单位像素）
    Thumbnail_ox = -2    # 横向
    Thumbnail_oy = -2-32 # 纵向

    # 各窗口切换时的渐变帧数
    TRANS_DURATION = 5

  end
end
#==============================================================================
# [核心脚本] 快速储存Bitmap的Marshal By 柳之一
#==============================================================================
class Font
  def marshal_dump
  end
  def marshal_load(obj)
  end
end
class Bitmap
  RtlMoveMemory_pi = Win32API.new('kernel32', 'RtlMoveMemory', 'pii', 'i')
  RtlMoveMemory_ip = Win32API.new('kernel32', 'RtlMoveMemory', 'ipi', 'i')
  def _dump(limit)
    data = "rgba" * width * height
    RtlMoveMemory_pi.call(data, address, data.length)
    [width, height, Zlib::Deflate.deflate(data)].pack("LLa*")
  end
  def self._load(str)
    w, h, zdata = str.unpack("LLa*")
    b = self.new(w, h)
    RtlMoveMemory_ip.call(b.address, Zlib::Inflate.inflate(zdata), w * h * 4)
    return b
  end
  def address
    buffer, ad = "rgba", object_id * 2 + 16
    RtlMoveMemory_pi.call(buffer, ad, 4)
    ad = buffer.unpack("L")[0] + 8
    RtlMoveMemory_pi.call(buffer, ad, 4)
    ad = buffer.unpack("L")[0] + 16
    RtlMoveMemory_pi.call(buffer, ad, 4)
    return buffer.unpack("L")[0]
  end
end
#==============================================================================
# ■ Game_Temp
#==============================================================================
class Game_Temp
  attr_accessor :save_bitmap
  attr_accessor :save_snapshoot
  alias new_initialize initialize
  def initialize
    new_initialize
    @save_bitmap = Bitmap.new(1, 1)
    @save_snapshoot = Bitmap.new(1, 1)
  end
end
#==============================================================================
# ■ SceneManager
#==============================================================================
module SceneManager
  def self.snapshot_for_save
    $game_temp.save_bitmap = Graphics.snap_to_bitmap
    unless FileTest.exist?(PS0::Window_SaveFile_Plus::SAVE_DIR)
      Dir.mkdir(PS0::Window_SaveFile_Plus::SAVE_DIR)
    end
  end
end
#==============================================================================
# ■ Scene_Map
#==============================================================================
class Scene_Map < Scene_Base
  alias save_terminate terminate
  def terminate
    SceneManager.snapshot_for_save
    save_terminate
  end
end
#==============================================================================
# ■ DataManager
#==============================================================================
module DataManager
  def self.save_file_exists?
    !Dir.glob(PS0::Window_SaveFile_Plus::SAVE_DIR + 'Save*.rvdata2').empty?
  end
  def self.make_filename(index)
    sprintf(PS0::Window_SaveFile_Plus::SAVE_DIR + "Save%02d.rvdata2", index + 1)
  end
  #--------------------------------------------------------------------------
  # ● セーブヘッダの作成
  #--------------------------------------------------------------------------
  def self.make_save_header
    d_rect = Rect.new(0, 0, PS0::Window_SaveFile_Plus::Thumbnail_Width,
                            PS0::Window_SaveFile_Plus::Thumbnail_Height)
    case PS0::Window_SaveFile_Plus::Zoom_Type
    when "NN"
      s_rect = $game_temp.save_bitmap.rect
      $game_temp.save_snapshoot = Bitmap.new(d_rect.width, d_rect.height)
      $game_temp.save_snapshoot.stretch_blt(d_rect, $game_temp.save_bitmap, s_rect)
    when "NZ"
      x = [$game_player.screen_x - d_rect.width/2, 0].max
      x = [x, Graphics.width - d_rect.width].min
      y = [$game_player.screen_y - d_rect.height/2, 0].max
      y = [y, Graphics.height - d_rect.height].min
      s_rect = Rect.new(x, y, d_rect.width, d_rect.height)
      $game_temp.save_snapshoot = Bitmap.new(d_rect.width, d_rect.height)
      $game_temp.save_snapshoot.blt(0, 0, $game_temp.save_bitmap, s_rect)
    end
    header = {}
    header[:characters] = $game_party.characters_for_savefile
    header[:playtime_s] = $game_system.playtime_s
    header[:snapshoot]  = $game_temp.save_snapshoot
    header
  end
  #--------------------------------------------------------------------------
  # ● セーブの実行
  #--------------------------------------------------------------------------
  def self.save_game(index)
    saving_window = Window_Saving.new
    Graphics.update
    begin
      save_game_without_rescue(index)
    rescue
       delete_save_file(index)
       false
    end
    saving_window.dispose
    return true
  end
end
#==============================================================================
# ■ Window_Yes_Or_No
#------------------------------------------------------------------------------
# 　提供“是”、“否”两个选项的窗口（替换、删除存档用）
#==============================================================================
class Window_Yes_Or_No < Window_HorzCommand
  #--------------------------------------------------------------------------
  # ● オブジェクト初期化
  #--------------------------------------------------------------------------
  def initialize(yes, no)
    @yes = yes
    @no = no
    super(130, 0)
    self.visible = false
    self.active = false
    @index = 0
  end
  #--------------------------------------------------------------------------
  # ● 桁数の取得
  #--------------------------------------------------------------------------
  def col_max
    return 2
  end
  #--------------------------------------------------------------------------
  # ● コマンドリストの作成
  #--------------------------------------------------------------------------
  def make_command_list
    add_command(@yes,   :yes)
    add_command(@no,    :cancel)
  end
  #--------------------------------------------------------------------------
  # ● 決定ボタンが押されたときの処理
  #--------------------------------------------------------------------------
  def process_ok
    Input.update
    call_ok_handler
  end
  #--------------------------------------------------------------------------
  # ● 按下取消键时的处理
  #--------------------------------------------------------------------------
  def process_cancel
    Input.update
    call_cancel_handler
  end
  #--------------------------------------------------------------------------
  # ● 启用窗口
  #--------------------------------------------------------------------------
  def activate
    temp = self.y + self.height - Graphics.height
    if temp > 0
      self.y -= (temp + 12)
    end
    self.active = true
    self
  end
end
#==============================================================================
# ■ Window_Saving
#------------------------------------------------------------------------------
# 　显示保存信息的窗口
#==============================================================================
class Window_Saving < Window_Base
  #--------------------------------------------------------------------------
  # ● オブジェクト初期化
  #--------------------------------------------------------------------------
  def initialize
    w = PS0::Window_SaveFile_Plus::SAVE_NOW.length * 16 + 32
    x = (Graphics.width - w)/2
    y = (Graphics.height - fitting_height(1))/2
    super(x, y, w, fitting_height(1))
    self.visible = PS0::Window_SaveFile_Plus::SHOW_SAVE_NOW
    draw_text_ex(4, 0, PS0::Window_SaveFile_Plus::SAVE_NOW)
  end
end
#==============================================================================
# ■ Window_SaveManagerCommand
#------------------------------------------------------------------------------
# 　存档管理窗口
#==============================================================================
class Window_SaveManagerCommand < Window_Command
  #--------------------------------------------------------------------------
  # ● 初始化对象
  #--------------------------------------------------------------------------
  def initialize(*args)
    @copy, @move, @delete, @cancel = args[0..3]
    super(130, 0)
    self.visible = false
    self.active = false
    @index = 0
  end
  #--------------------------------------------------------------------------
  # ● 获取窗口的宽度
  #--------------------------------------------------------------------------
  def window_width
    return 100
  end
  #--------------------------------------------------------------------------
  # ● 获取项目数
  #--------------------------------------------------------------------------
  def item_max
    return 4
  end
  #--------------------------------------------------------------------------
  # ● 生成指令列表
  #--------------------------------------------------------------------------
  def make_command_list
    add_command(@copy,   :copy  )
    add_command(@move,   :move  )
    add_command(@delete, :delete)
    add_command(@cancel, :cancel)
  end
  #--------------------------------------------------------------------------
  # ● 按下确定键时的处理
  #--------------------------------------------------------------------------
  def process_ok
    Input.update
    call_ok_handler
  end
  #--------------------------------------------------------------------------
  # ● 启用窗口
  #--------------------------------------------------------------------------
  def activate
    temp = self.y + self.height - Graphics.height
    if temp > 0
      self.y -= (temp + 12)
    end
    self.active = true
    self
  end
end
#==============================================================================
# ■ Window_FileCommand
#------------------------------------------------------------------------------
# 　截图存档左侧的选择窗口。
#==============================================================================
class Window_FileCommand < Window_Command
  #--------------------------------------------------------------------------
  # ● オブジェクト初期化
  #--------------------------------------------------------------------------
  def initialize
    super(0, 0)
  end
  #--------------------------------------------------------------------------
  # ● ウィンドウ幅の取得
  #--------------------------------------------------------------------------
  def window_height
    return Graphics.height-fitting_height(1)
  end
  #--------------------------------------------------------------------------
  # ● 表示行数の取得
  #--------------------------------------------------------------------------
  def visible_line_number
    item_max
  end
  #--------------------------------------------------------------------------
  # ● コマンドリストの作成
  #--------------------------------------------------------------------------
  def make_command_list
    add_main_commands
  end
  #--------------------------------------------------------------------------
  # ● 主要コマンドをリストに追加
  #--------------------------------------------------------------------------
  def add_main_commands
    for i in 1..PS0::Window_SaveFile_Plus::MAX_SAVE
      if i < 10
        text = Vocab::File + " 0" + i.to_s
      else
        text = Vocab::File + " " + i.to_s
      end
      add_command(text, :file)
    end
  end
  #--------------------------------------------------------------------------
  # ● 決定ボタンが押されたときの処理
  #--------------------------------------------------------------------------
  def process_ok
  end
end
#==============================================================================
# ■ Window_SaveFile
#------------------------------------------------------------------------------
# 　セーブ画面およびロード画面で表示する、セーブファイルのウィンドウです。
#==============================================================================
class Window_SaveFile < Window_Base
  #--------------------------------------------------------------------------
  # ● オブジェクト初期化
  #     index : セーブファイルのインデックス
  #--------------------------------------------------------------------------
  def initialize(index)
    super(160, 0, Graphics.width-160, Graphics.height-fitting_height(1))
    @file_index = index
    @selected = true
    refresh
  end
  #--------------------------------------------------------------------------
  # ● リフレッシュ
  #--------------------------------------------------------------------------
  def refresh
    contents.clear
    change_color(normal_color)
    w = (self.width-PS0::Window_SaveFile_Plus::Thumbnail_Width-16)/2
    h = (self.height-PS0::Window_SaveFile_Plus::Thumbnail_Height-16)/2
    width  = w + PS0::Window_SaveFile_Plus::Thumbnail_ox
    height = h + PS0::Window_SaveFile_Plus::Thumbnail_oy
    draw_shadow(width+5, height+5)
    draw_text((self.width-32-PS0::Window_SaveFile_Plus::NO_DATA.length*16)/2,
              self.height/2-32, PS0::Window_SaveFile_Plus::NO_DATA.length*32,
              line_height, PS0::Window_SaveFile_Plus::NO_DATA)
    draw_party_characters(32, Graphics.height-fitting_height(1)-32)
    draw_playtime(-10, contents.height - line_height-10, contents.width - 4, 2)
    draw_snapshoot(width, height)
  end
  #--------------------------------------------------------------------------
  # ● パーティキャラの描画
  #--------------------------------------------------------------------------
  def draw_party_characters(x, y)
    header = DataManager.load_header(@file_index)
    return unless header
    header[:characters].each_with_index do |data, i|
      draw_character(data[0], data[1], x + i * 48, y)
    end
  end
  #--------------------------------------------------------------------------
  # ● プレイ時間の描画
  #--------------------------------------------------------------------------
  def draw_playtime(x, y, width, align)
    header = DataManager.load_header(@file_index)
    return unless header
    draw_text(x, y, width, line_height, header[:playtime_s], 2)
  end
  #--------------------------------------------------------------------------
  # ● 绘制截图
  #--------------------------------------------------------------------------
  def draw_snapshoot(x, y)
    header = DataManager.load_header(@file_index)
    return unless header
    bitmap = header[:snapshoot]
    contents.blt(x, y, bitmap, bitmap.rect)
    bitmap.dispose
  end
  #--------------------------------------------------------------------------
  # ● 绘制阴影
  #--------------------------------------------------------------------------
  def draw_shadow(x, y)
    header = DataManager.load_header(@file_index)
    return unless header
    contents.fill_rect(x, y, PS0::Window_SaveFile_Plus::Thumbnail_Width,
                             PS0::Window_SaveFile_Plus::Thumbnail_Height, Color.new(0, 0, 0))
    contents.blur
  end
end
#==============================================================================
# ■ Scene_File
#------------------------------------------------------------------------------
# 　セーブ画面とロード画面の共通処理を行うクラスです。
#==============================================================================
class Scene_File < Scene_MenuBase
  #--------------------------------------------------------------------------
  # ● 開始処理
  #--------------------------------------------------------------------------
  def start
    super
    create_help_window
    create_savefile_viewport
    create_command_window
    create_savefile_window
    create_manager_window
    create_replace_window
    create_delete_window
  end
  #--------------------------------------------------------------------------
  # ● 終了処理
  #--------------------------------------------------------------------------
  def terminate
    super
    @savefile_viewport.dispose
    @savefile_window.dispose
    @command_window.dispose
    @window_manager.dispose
    @window_replace.dispose
    @window_delete.dispose
  end
  #--------------------------------------------------------------------------
  # ● フレーム更新
  #--------------------------------------------------------------------------
  def update
    super
    update_savefile_selection
  end
  #--------------------------------------------------------------------------
  # ● 创建替换窗口
  #--------------------------------------------------------------------------
  def create_replace_window
    @window_replace = Window_Yes_Or_No.new("替换", "取消")
    @window_replace.set_handler(:yes,    method(:do_replace))
    @window_replace.set_handler(:cancel, method(:do_cancel))
  end
  #--------------------------------------------------------------------------
  # ● 创建删除窗口
  #--------------------------------------------------------------------------
  def create_delete_window
    @window_delete  = Window_Yes_Or_No.new("删除", "取消")
    @window_delete.set_handler(:yes,    method(:do_delete))
    @window_delete.set_handler(:cancel, method(:do_return_manager))
    @window_delete.x += 40
  end
  #--------------------------------------------------------------------------
  # ● 创建管理窗口
  #--------------------------------------------------------------------------
  def create_manager_window
    @window_manager = Window_SaveManagerCommand.new("复制", "移动", "删除", "取消")
    @window_manager.set_handler(:copy  , method(:on_copy?))
    @window_manager.set_handler(:move  , method(:on_move?))
    @window_manager.set_handler(:delete, method(:on_delete?))
    @window_manager.set_handler(:cancel, method(:do_cancel))
  end
  #--------------------------------------------------------------------------
  # ● ヘルプウィンドウの作成
  #--------------------------------------------------------------------------
  def create_help_window
    @help_window = Window_Help.new(1)
    @help_window.set_text(help_window_text)
  end
  #--------------------------------------------------------------------------
  # ● ヘルプウィンドウのテキストを取得
  #--------------------------------------------------------------------------
  def help_window_text
    return ""
  end
  #--------------------------------------------------------------------------
  # ● セーブファイルビューポートの作成
  #--------------------------------------------------------------------------
  def create_savefile_viewport
    @savefile_viewport = Viewport.new
    @savefile_viewport.rect.y = @help_window.height
    @savefile_viewport.rect.height -= @help_window.height
  end
  #--------------------------------------------------------------------------
  # ● セーブファイルウィンドウの作成
  #--------------------------------------------------------------------------
  def create_savefile_window
    @savefile_window = Window_SaveFile.new(@index)
    @savefile_window.viewport = @savefile_viewport
  end
  #--------------------------------------------------------------------------
  # ● 生成存档列表窗口
  #--------------------------------------------------------------------------
  def create_command_window
    @command_window = Window_FileCommand.new
    @command_window.index = first_savefile_index
    @index = @command_window.index
    @command_window.viewport = @savefile_viewport
    @command_window.set_handler(:file,      method(:on_savefile_ok))
  end
  #--------------------------------------------------------------------------
  # ● セーブファイル選択の更新
  #--------------------------------------------------------------------------
  def update_savefile_selection
    if @source_index != nil
      if Input.trigger?(:C)
        if @index == @source_index
          Sound.play_buzzer
        elsif FileTest.exist?(DataManager.make_filename(@index))
          Graphics.freeze
          @command_window.deactivate
          @window_replace.y = 72 + @index * 24
          @window_replace.activate
          @window_replace.visible = true
          @window_replace.refresh
          Sound.play_ok
          Graphics.transition(PS0::Window_SaveFile_Plus::TRANS_DURATION)
        else
          return on_copy_ok
        end
      elsif Input.trigger?(:B)
        return do_return_manager
      end
    else
      if Input.trigger?(:C)
        if self.is_a?(Scene_Save) and FileTest.exist?(DataManager.make_filename(@index))
          Graphics.freeze
          @command_window.deactivate
          @window_replace.y = 72 + @index * 24
          @window_replace.activate
          @window_replace.visible = true
          @window_replace.refresh
          Sound.play_ok
          Graphics.transition(PS0::Window_SaveFile_Plus::TRANS_DURATION)
        else
          return on_savefile_ok
        end
      elsif Input.trigger?(:B)
        return on_savefile_cancel
      elsif Input.trigger?(:F5)
        unless @window_manager.active == true or
               @window_delete.active == true or
               @window_replace.active == true
          return on_manager?
        end
      end
    end
    @need_refresh = true if @index != @command_window.index
    if @need_refresh
      Graphics.freeze
      @index = @command_window.index
      @savefile_window.dispose
      create_savefile_window
      @need_refresh = false
      Graphics.transition(PS0::Window_SaveFile_Plus::TRANS_DURATION)
    end
  end
  #--------------------------------------------------------------------------
  # ● セーブファイル［決定］
  #--------------------------------------------------------------------------
  def on_savefile_ok
  end
  #--------------------------------------------------------------------------
  # ● セーブファイル［キャンセル］
  #--------------------------------------------------------------------------
  def on_savefile_cancel
    Sound.play_cancel
    return_scene
  end
  #--------------------------------------------------------------------------
  # ● セーブファイル［決定］
  #--------------------------------------------------------------------------
  def on_copy_ok
    Graphics.freeze
    source_name = DataManager.make_filename(@source_index)
    new_name    = DataManager.make_filename(@index)
    case @source_type
    when "copy"
      # 复制存档文件（API）
      Win32API.new('kernel32',"CopyFileA",'ppl','').call(source_name,new_name,0)
    when "move"
      # 重命名存档
      File.rename(source_name, new_name)
    end
    # 返回
    @help_window.set_text(help_window_text)
    @source_index = nil
    do_return_savelist
  end
  #--------------------------------------------------------------------------
  # ● セーブファイル［复制］
  #--------------------------------------------------------------------------
  def on_copy?
    Graphics.freeze
    @help_window.set_text(PS0::Window_SaveFile_Plus::HELP_COPY)
    @source_index = @index
    @source_type = "copy"
    do_return_savelist
  end
  #--------------------------------------------------------------------------
  # ● セーブファイル［移动］
  #--------------------------------------------------------------------------
  def on_move?
    Graphics.freeze
    @help_window.set_text(PS0::Window_SaveFile_Plus::HELP_MOVE)
    @source_index = @index
    @source_type = "move"
    do_return_savelist
  end
  #--------------------------------------------------------------------------
  # ● セーブファイル［管理］
  #--------------------------------------------------------------------------
  def on_manager?
    if FileTest.exist?(DataManager.make_filename(@index))
      Graphics.freeze
      @command_window.deactivate
      @window_manager.y = 72 + @index * 24
      @window_manager.activate
      @window_manager.visible = true
      @window_manager.refresh
      Sound.play_ok
      Graphics.transition(PS0::Window_SaveFile_Plus::TRANS_DURATION)
    else
      Sound.play_buzzer
    end
  end
  #--------------------------------------------------------------------------
  # ● セーブファイル［删除］
  #--------------------------------------------------------------------------
  def on_delete?
    Graphics.freeze
    @window_manager.deactivate
    @command_window.deactivate
    @window_delete.y = 72 + 72 + @index * 24
    @window_delete.activate
    @window_delete.visible = true
    @window_delete.refresh
    Sound.play_ok
    Graphics.transition(PS0::Window_SaveFile_Plus::TRANS_DURATION)
  end
  #--------------------------------------------------------------------------
  # ● 删除
  #--------------------------------------------------------------------------
  def do_delete
    Graphics.freeze
    File.delete(DataManager.make_filename(@index))
    @window_delete.index  = 0
    @window_manager.index = 0
    @window_delete.visible  = false
    @window_manager.visible = false
    @window_delete.deactivate
    @window_manager.deactivate
    @command_window.activate
    @need_refresh = true
    Sound.play_save
    if DataManager.save_file_exists?
      Graphics.transition(PS0::Window_SaveFile_Plus::TRANS_DURATION)
    else
      return_scene
    end
  end
  #--------------------------------------------------------------------------
  # ● 替换
  #--------------------------------------------------------------------------
  def do_replace
    Graphics.freeze
    if @source_index != nil
      return on_copy_ok
    else
      return on_savefile_ok
    end
    @window_replace.visible = false
    @window_replace.deactivate
    @need_refresh = true
  end
  #--------------------------------------------------------------------------
  # ● 取消
  #--------------------------------------------------------------------------
  def do_cancel
    Graphics.freeze
    Sound.play_cancel
    @window_delete.index  = 0
    @window_replace.index = 0
    @window_manager.index = 0
    @window_delete.visible  = false
    @window_replace.visible = false
    @window_manager.visible = false
    @window_delete.deactivate
    @window_replace.deactivate
    @window_manager.deactivate
    @command_window.activate
    Graphics.transition(PS0::Window_SaveFile_Plus::TRANS_DURATION)
  end
  #--------------------------------------------------------------------------
  # ● 返回管理菜单
  #--------------------------------------------------------------------------
  def do_return_manager
    Graphics.freeze
    @help_window.set_text(help_window_text)
    @command_window.index = @source_index unless @source_index == nil
    @source_index = nil
    @source_type = nil
    @command_window.deactivate
    @window_delete.index  = 0
    @window_replace.index = 0
    @window_delete.visible  = false
    @window_replace.visible = false
    @window_delete.deactivate
    @window_replace.deactivate
    @window_manager.y = 72 + @index * 24
    @window_manager.activate
    @window_manager.visible = true
    @window_manager.refresh
    Sound.play_cancel
    Graphics.transition(PS0::Window_SaveFile_Plus::TRANS_DURATION)
  end
  #--------------------------------------------------------------------------
  # ● 返回文件列表（复制、移动 用）
  #--------------------------------------------------------------------------
  def do_return_savelist
    @window_manager.visible = false
    @window_manager.deactivate
    @command_window.activate
    @need_refresh = true
    Sound.play_ok
  end
end
#==============================================================================
# [PS0] End of Script
#==============================================================================
[/pre]

捕获.PNG (245.78 KB, 下载次数: 66)

捕获.PNG
作者: alexncf125    时间: 2021-2-15 18:18
把·CONG'S EASY MENU由第1089行class Scene_File < Scene_MenuBase开始,
至到1374行module DataManager的end作结尾, 全部注释掉就对了
作者: PLeaseS    时间: 2021-2-16 07:14
禁用存档，然后事件写一个？
作者: 最初の結果    时间: 2021-4-4 22:24
好像不行，我的好像是改过的葱式菜单。
作者: 最初の結果    时间: 2021-4-4 22:25
  1. #encoding:utf-8
  2. #==============================================================================
  3. # ◇ CONG'S EASY MENU ◇ 葱式解谜用简易菜单
  4. #------------------------------------------------------------------------------
  5. # By Conwsbn
  6. # http://congrm.lofter.com/
  7. #==============================================================================

  9. $imported = {} if $imported.nil?
  10. $imported[:congs_easy_menu] = true

  12. #==============================================================================
  13. # ■ Window_Base
  14. #==============================================================================
  15. class Window_Base < Window
  16.   #--------------------------------------------------------------------------
  17.   # ● 获取统一字体设置
  18.   #--------------------------------------------------------------------------
  19.   def easy_menu_font
  20.     contents.font.name = EASY_MENU_SET::Font_name
  21.     contents.font.size = EASY_MENU_SET::Font_size
  22.     contents.font.outline = EASY_MENU_SET::Font_outline
  23.     contents.font.shadow = EASY_MENU_SET::Font_shadow
  24.     contents.font.bold = EASY_MENU_SET::Font_bold
  25.     contents.font.italic = EASY_MENU_SET::Font_italic
  26.   end
  27. end

  29. #==============================================================================
  30. # ■ Window_Help
  31. #==============================================================================
  32. class Window_Help < Window_Base
  33.   #--------------------------------------------------------------------------
  34.   # ● 初始化对象
  35.   #--------------------------------------------------------------------------
  36.   def initialize(line_number = 2, width = Graphics.width)
  37.     super(0, 0, width, fitting_height(line_number))
  38.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  39.     self.opacity = EASY_MENU_SET::HELP_opacity
  40.   end
  41.   #--------------------------------------------------------------------------
  42.   # ● 设置内容
  43.   #--------------------------------------------------------------------------
  44.   def set_text(text)
  45.     text.gsub!(/\\n/i) { "\n" }
  46.     if text != @text
  47.       @text = text
  48.       refresh
  49.     end
  50.   end
  51.   #--------------------------------------------------------------------------
  52.   # ● 清除
  53.   #--------------------------------------------------------------------------
  54.   def clear
  55.     set_text("")
  56.   end
  57.   #--------------------------------------------------------------------------
  58.   # ● 设置物品
  59.   #     item : 技能、物品等
  60.   #--------------------------------------------------------------------------
  61.   def set_item(item)
  62.     set_text(item ? item.description : "")
  63.   end
  64.   #--------------------------------------------------------------------------
  65.   # ● 绘制带有控制符的文本内容
  66.   #--------------------------------------------------------------------------
  67.   def draw_text_ex(x, y, text)
  68.     reset_item_font_settings
  69.     text = convert_escape_characters(text)
  70.     pos = {:x => x, :y => y, :new_x => x, :height => calc_line_height(text)}
  71.     process_character(text.slice!(0, 1), text, pos) until text.empty?
  72.   end
  73.   #--------------------------------------------------------------------------
  74.   # ● 物品帮助字体设置
  75.   #--------------------------------------------------------------------------
  76.   def reset_item_font_settings
  77.     return if @text_line
  78.     contents.font.name = EASY_MENU_SET::HELP_name
  79.     contents.font.size = EASY_MENU_SET::HELP_size
  80.     contents.font.outline = EASY_MENU_SET::HELP_outline
  81.     contents.font.shadow = EASY_MENU_SET::HELP_shadow
  82.     contents.font.bold = EASY_MENU_SET::HELP_bold
  83.     contents.font.italic = EASY_MENU_SET::HELP_italic
  84.     v = EASY_MENU_SET::HELP_color
  85.     change_color(Color.new(v[0], v[1], v[2]))
  86.   end
  87.   #--------------------------------------------------------------------------
  88.   # ● 获取文字颜色
  89.   #--------------------------------------------------------------------------
  90.   def text_color(n)
  91.     v = EASY_MENU_SET::HELP_color
  92.     return Color.new(v[0], v[1], v[2]) if n == 0
  93.     return windowskin.get_pixel(64 + (n % 8) * 8, 96 + (n / 8) * 8)
  94.   end
  95.   #--------------------------------------------------------------------------
  96.   # ● 处理普通文字
  97.   #--------------------------------------------------------------------------
  98.   def process_normal_character(c, pos)
  99.     if (pos[:x] + contents.text_size(c).width) > contents.width
  100.       @text_line = true
  101.       process_new_line(c, pos)
  102.       @text_line = false
  103.       pos[:height] = calc_line_height(c)
  104.     end
  105.     text_width = text_size(c).width
  106.     draw_text(pos[:x], pos[:y], text_width * 2, pos[:height], c)
  107.     pos[:x] += text_width
  108.   end
  109.   #--------------------------------------------------------------------------
  110.   # ● 刷新
  111.   #--------------------------------------------------------------------------
  112.   def refresh
  113.     contents.clear
  114.     draw_text_ex(4, 0, @text)
  115.   end
  116. end

  118. #==============================================================================
  119. # ■ Window_MenuCommand
  120. #==============================================================================
  121. class Window_MenuCommand < Window_Command
  122.   #--------------------------------------------------------------------------
  123.   # ● 初始化指令选择位置（类方法）
  124.   #--------------------------------------------------------------------------
  125.   def self.init_command_position(type = nil)
  126.     @@last_command_symbol = type
  127.   end
  128.   #--------------------------------------------------------------------------
  129.   # ● 初始化对象
  130.   #--------------------------------------------------------------------------
  131.   def initialize(sub = false)
  132.     @sub = sub
  133.     super(-24, EASY_MENU_SET::COMMAND[1])
  134.     self.opacity = 0
  135.     self.active = false
  136.     @show = false
  137.     @move_rx = @sub_ry = 0
  138.     @last_index = @index
  139.     update_placement unless @sub
  140.     select_last
  141.     refresh
  142.   end
  143.   #--------------------------------------------------------------------------
  144.   # ● 获取标准的边距尺寸
  145.   #--------------------------------------------------------------------------
  146.   def standard_padding
  147.     return 0
  148.   end
  149.   #--------------------------------------------------------------------------
  150.   # ● 显示动画前的设定
  151.   #--------------------------------------------------------------------------
  152.   def update_placement
  153.     self.x = -24 - window_width
  154.     self.contents_opacity = 0
  155.   end
  156.   #--------------------------------------------------------------------------
  157.   # ● 获取窗口的宽度
  158.   #--------------------------------------------------------------------------
  159.   def window_width
  160.     return EASY_MENU_SET::COMMAND[2] + 24 + 24
  161.   end
  162.   #--------------------------------------------------------------------------
  163.   # ● 获取项目的宽度
  164.   #--------------------------------------------------------------------------
  165.   def item_width
  166.     width - 24
  167.   end
  168.   #--------------------------------------------------------------------------
  169.   # ● 获取间隔距离
  170.   #--------------------------------------------------------------------------
  171.   def line_spacing
  172.     return EASY_MENU_SET::COMMAND[4]
  173.   end
  174.   #--------------------------------------------------------------------------
  175.   # ● 获取行高
  176.   #--------------------------------------------------------------------------
  177.   def line_height
  178.     return EASY_MENU_SET::COMMAND[3] + line_spacing
  179.   end
  180.   #--------------------------------------------------------------------------
  181.   # ● 获取指令名称
  182.   #--------------------------------------------------------------------------
  183.   def set_command_name(v)
  184.     @name = []
  185.     for i in 0...EASY_MENU_SET::BUTTON.size
  186.       name = Vocab::item     if v[i][4] == :item
  187.       name = Vocab::key_item if v[i][4] == :key_item
  188.       name = Vocab::save     if v[i][4] == :save
  189.       name = Vocab::continue if v[i][4] == :continue
  190.       name = Vocab::game_end if v[i][4] == :game_end
  191.       @name[i] = v[i][1] ? v[i][1] : name
  192.     end
  193.   end
  194.   #--------------------------------------------------------------------------
  195.   # ● 获取显示状态
  196.   #--------------------------------------------------------------------------
  197.   def set_command_enabled(v)
  198.     @enabled = []
  199.     for i in 0...EASY_MENU_SET::BUTTON.size
  200.       enabled = main_commands_enabled         if v[i][4] == :item
  201.       enabled = main_commands_enabled         if v[i][4] == :key_item
  202.       enabled = save_enabled                  if v[i][4] == :save
  203.       enabled = DataManager.save_file_exists? if v[i][4] == :continue
  204.       enabled = true                          if v[i][4] == :game_end
  205.       @enabled[i] = enabled
  206.     end
  207.   end
  208.   #--------------------------------------------------------------------------
  209.   # ● 获取指令图标
  210.   #--------------------------------------------------------------------------
  211.   def set_command_icon(v)
  212.     @icon = []
  213.     for i in 0...EASY_MENU_SET::BUTTON.size
  214.       @icon[i] = v[i][2] if v[i][2]
  215.     end
  216.   end
  217.   #--------------------------------------------------------------------------
  218.   # ● 获取选项的图标
  219.   #--------------------------------------------------------------------------
  220.   def command_icon(index)
  221.     @list[index][:ext]
  222.   end
  223.   #--------------------------------------------------------------------------
  224.   # ● 生成指令列表
  225.   #--------------------------------------------------------------------------
  226.   def make_command_list
  227.     v = EASY_MENU_SET::BUTTON
  228.     set_command_name(v)
  229.     set_command_icon(v)
  230.     set_command_enabled(v)
  231.     for i in 0...EASY_MENU_SET::BUTTON.size
  232.       add_command(@name[i], v[i][4], @enabled[i], @icon[i]) if v[i][0] or @sub
  233.     end
  234.   end
  235.   #--------------------------------------------------------------------------
  236.   # ● 刷新
  237.   #--------------------------------------------------------------------------
  238.   def refresh
  239.     #clear_command_list
  240.     #make_command_list
  241.     create_contents
  242.     contents.clear
  243.     draw_all_items
  244.   end
  245.   #--------------------------------------------------------------------------
  246.   # ● 绘制项目
  247.   #--------------------------------------------------------------------------
  248.   def draw_item(index)
  249.     return if @sub && @index != index
  250.     easy_menu_font
  251.     rect = item_rect_for_text(index)
  252.     t_size = text_size(command_name(index))
  253.     mx = @index == index ? @sub ? 0 : @move_rx : 0
  254.     my = @sub ? @sub_ry : 0
  255.     ix = item_width - t_size.width - 28 + mx
  256.     iy = (line_height - t_size.height) / 2 + my
  257.     draw_background(index, rect, mx, my)
  258.     rect.x -= 24
  259.     rect.y -= (line_spacing / 2)
  260.     enabled = command_enabled?(index)
  261.     change_color(item_color(index), enabled)
  262.     rt = [rect.x + mx, rect.y + my, rect.width, rect.height]
  263.     draw_text(rt[0], rt[1], rt[2], rt[3], command_name(index), 2)
  264.     draw_icon(command_icon(index), rect.x + ix, rect.y + iy, enabled)
  265.   end
  266.   #--------------------------------------------------------------------------
  267.   # ● 绘制底纹
  268.   #--------------------------------------------------------------------------
  269.   def draw_background(index, rect, x, y)
  270.     lh = line_height - line_spacing
  271.     bit = Cache.system(EASY_MENU_SET::COMMAND[0])
  272.     rx = bit.width - item_width
  273.     rect1 = Rect.new(rx, 0, item_width, 12)
  274.     rect2 = Rect.new(rx, 12, item_width, 12)
  275.     rect3 = Rect.new(rx, 36 - 12, item_width, 12)
  276.     d_rect = Rect.new(rect.x + x, rect.y + 12 + y, item_width, lh - 24)
  277.     self.contents.blt(rect.x + x, rect.y + y, bit, rect1)
  278.     self.contents.stretch_blt(d_rect, bit, rect2)
  279.     self.contents.blt(rect.x + x, rect.y + lh - 12 + y, bit, rect3)
  280.   end
  281.   #--------------------------------------------------------------------------
  282.   # ● 字体颜色扩展
  283.   #--------------------------------------------------------------------------
  284.   def item_color(index)
  285.     co = EASY_MENU_SET::BUTTON[index][3]
  286.     return Color.new(co[0], co[1], co[2]) if @index == index
  287.     return Color.new(co[0], co[1], co[2], 200)
  288.   end
  289.   #--------------------------------------------------------------------------
  290.   # ● 获取项目的绘制矩形
  291.   #--------------------------------------------------------------------------
  292.   def item_rect(index)
  293.     index = 0 if @sub
  294.     rect = Rect.new
  295.     rect.width = 4
  296.     rect.height = 24
  297.     rect.x = index % col_max * (item_width + spacing) + 32
  298.     rect.y = index / col_max * item_height + 4
  299.     rect
  300.   end
  301.   #--------------------------------------------------------------------------
  302.   # ● 获取项目的绘制矩形（内容用）
  303.   #--------------------------------------------------------------------------
  304.   def item_rect_for_text(index)
  305.     index = 0 if @sub
  306.     rect = Rect.new
  307.     rect.width = item_width
  308.     rect.height = item_height
  309.     rect.x = index % col_max * (item_width + spacing)
  310.     rect.y = index / col_max * item_height
  311.     rect
  312.   end
  313.   #--------------------------------------------------------------------------
  314.   # ● 展开动画的标志
  315.   #--------------------------------------------------------------------------
  316.   def show=(show)
  317.     if @show != show
  318.       @show = show
  319.     end
  320.   end
  321.   #--------------------------------------------------------------------------
  322.   # ● 获取动画的标志
  323.   #--------------------------------------------------------------------------
  324.   def show
  325.     return @show
  326.   end
  327.   #--------------------------------------------------------------------------
  328.   # ● 更新画面
  329.   #--------------------------------------------------------------------------
  330.   def update
  331.     super
  332.     if @last_index != @index && !@show
  333.       @move_rx = 0
  334.       @last_index = @index
  335.     end
  336.     update_button if Input.dir4 > 0 or @move_rx < 24
  337.   end
  338.   #--------------------------------------------------------------------------
  339.   # ● 按钮的改变动画
  340.   #--------------------------------------------------------------------------
  341.   def update_button
  342.     @move_rx += 4 if @move_rx < 24
  343.     refresh
  344.   end
  345.   #--------------------------------------------------------------------------
  346.   # ● 按钮的还原动画
  347.   #--------------------------------------------------------------------------
  348.   def hide_button
  349.     @move_rx -= 4 if @move_rx > 0
  350.     refresh
  351.   end
  352.   #--------------------------------------------------------------------------
  353.   # ● 展开动画
  354.   #--------------------------------------------------------------------------
  355.   def open_button_window
  356.     self.x += (window_width + 24) / EASY_MENU_SET::TIME
  357.     self.contents_opacity += 255 / EASY_MENU_SET::TIME
  358.     refresh
  359.     @show = false if self.x >= -24
  360.     self.x = -24 if !@show
  361.     self.contents_opacity = 255 if !@show
  362.   end
  363.   #--------------------------------------------------------------------------
  364.   # ● 关闭动画
  365.   #--------------------------------------------------------------------------
  366.   def close_button_window
  367.     @show = false if self.contents_opacity <= 0
  368.     if @move_rx > 0
  369.       hide_button
  370.     else
  371.       self.x -= (window_width + 24) / EASY_MENU_SET::TIME
  372.       self.contents_opacity -= 255 / EASY_MENU_SET::TIME
  373.       refresh
  374.     end
  375.   end
  376.   #--------------------------------------------------------------------------
  377.   # ● 进入子菜单的关闭动画
  378.   #--------------------------------------------------------------------------
  379.   def close_window_to_sub
  380.     if @move_rx > 0
  381.       hide_button
  382.       @sub_ry = @index / col_max * item_height
  383.     else
  384.       cursor_rect.empty
  385.       @show = false if @sub_ry <= 0
  386.       @sub_ry = 0 if !@show
  387.       @sub = true
  388.       @sub_ry = [(@sub_ry - ((EASY_MENU_SET::COMMAND[3] * index)) / 6), 0].max
  389.       refresh
  390.     end
  391.   end
  392. end

  394. #==============================================================================
  395. # ■ Scene_MenuBase
  396. #==============================================================================
  397. class Scene_MenuBase < Scene_Base
  398.   #--------------------------------------------------------------------------
  399.   # ● 结束处理
  400.   #--------------------------------------------------------------------------
  401.   alias easy_menu_terminate terminate
  402.   def terminate
  403.     easy_menu_terminate
  404.     dispose_rim
  405.     dispose_actor_cg
  406.     dispose_sub_button
  407.   end
  408.   #--------------------------------------------------------------------------
  409.   # ● 生成背景
  410.   #--------------------------------------------------------------------------
  411.   def create_background
  412.     wall = EASY_MENU_SET::WALLPAPER
  413.     co = EASY_MENU_SET::BACKGROUND
  414.     @background_sprite = Sprite.new
  415.     bitmap = wall ? Cache.system(wall) : SceneManager.background_bitmap
  416.     @background_sprite.bitmap = bitmap
  417.     @background_sprite.color.set(co[0], co[1], co[2], co[3]) unless wall
  418.   end
  419.   #--------------------------------------------------------------------------
  420.   # ● 绘制次背景图片
  421.   #--------------------------------------------------------------------------
  422.   def create_rim_background(bitmap, x, y)
  423.     @rim_sprite = Sprite.new
  424.     @rim_sprite.bitmap = Cache.system(bitmap) if bitmap
  425.     @rim_sprite.x = x; @rim_sprite.y = y
  426.     @rim_sprite.z = @background_sprite.z
  427.   end
  428.   #--------------------------------------------------------------------------
  429.   # ● 释放次背景图片
  430.   #--------------------------------------------------------------------------
  431.   def dispose_rim
  432.     return if !@rim_sprite
  433.     @rim_sprite.bitmap.dispose
  434.     @rim_sprite.dispose
  435.   end
  436.   #--------------------------------------------------------------------------
  437.   # ● 生成立绘精灵
  438.   #--------------------------------------------------------------------------
  439.   def create_actor_cg
  440.     v = EASY_MENU_SET::CG
  441.     return unless v[0]
  442.     @actor_cg = Sprite.new
  443.     @actor_cg.bitmap = Cache.system(v[0])
  444.     @actor_cg.x = v[1] + 2 * 7
  445.     @actor_cg.y = v[2]
  446.   end
  447.   #--------------------------------------------------------------------------
  448.   # ● 立绘的坐标判断
  449.   #--------------------------------------------------------------------------
  450.   def cg_x
  451.     v = EASY_MENU_SET::CG
  452.     return v[3] if v[4] == :l
  453.     return -(v[3]) if v[4] == :r
  454.     return 0
  455.   end
  456.   #--------------------------------------------------------------------------
  457.   # ● 释放立绘精灵
  458.   #--------------------------------------------------------------------------
  459.   def dispose_actor_cg
  460.     return if !@actor_cg
  461.     @actor_cg.bitmap.dispose
  462.     @actor_cg.dispose
  463.   end
  464.   #--------------------------------------------------------------------------
  465.   # ● 展开动画的预设坐标
  466.   #--------------------------------------------------------------------------
  467.   def set_menu_xy
  468.     v = EASY_MENU_SET::CG
  469.     xx = 0
  470.     xx = -(EASY_MENU_SET::TIME * v[3]) if v[4] == :l
  471.     xx = EASY_MENU_SET::TIME * v[3] if v[4] == :r
  472.     @actor_cg.x = v[1] + xx
  473.     @actor_cg.opacity = 0
  474.     @rim_sprite.opacity = 0 if @rim_sprite
  475.   end
  476.   #--------------------------------------------------------------------------
  477.   # ● 重绘内用小标题
  478.   #--------------------------------------------------------------------------
  479.   def create_sub_button
  480.     @sub_window = Window_MenuCommand.new(true)
  481.     @sub_window.z = 300
  482.   end
  483.   #--------------------------------------------------------------------------
  484.   # ● 释放内用小标题
  485.   #--------------------------------------------------------------------------
  486.   def dispose_sub_button
  487.     @sub_window.dispose if @sub_window
  488.   end
  489. end

  491. #==============================================================================
  492. # ■ Scene_Menu
  493. #==============================================================================
  494. class Scene_Menu < Scene_MenuBase
  495.   #--------------------------------------------------------------------------
  496.   # ● 开始处理
  497.   #--------------------------------------------------------------------------
  498.   def start
  499.     super
  500.     v = EASY_MENU_SET::MENU_RIM
  501.     create_rim_background(v[0], v[1], v[2]) if v[0]
  502.     create_actor_cg
  503.     create_command_window
  504.     set_menu_xy
  505.     @sub_show = false
  506.   end
  507.   #--------------------------------------------------------------------------
  508.   # ● 开始后处理
  509.   #--------------------------------------------------------------------------
  510.   def post_start
  511.     super
  512.     @command_window.show = true
  513.     begin
  514.       @actor_cg.x += cg_x
  515.       @actor_cg.opacity += (255 / EASY_MENU_SET::TIME)
  516.       @rim_sprite.opacity += (255 / EASY_MENU_SET::TIME) if @rim_sprite
  517.       @command_window.open_button_window
  518.       Graphics.update
  519.     end until @command_window.show == false
  520.     @command_window.activate
  521.     @actor_cg.opacity = 255
  522.   end
  523.   #--------------------------------------------------------------------------
  524.   # ● 结束前处理
  525.   #--------------------------------------------------------------------------
  526.   def pre_terminate
  527.     super
  528.     t = 0
  529.     @command_window.show = true
  530.     begin
  531.       if @sub_show
  532.         t += 1 if t <= 6
  533.         @actor_cg.x += 2 if t <= 6
  534.         @command_window.close_window_to_sub
  535.       else
  536.         @actor_cg.x += -(cg_x)
  537.         @actor_cg.opacity -= 255 / EASY_MENU_SET::TIME
  538.         @rim_sprite.opacity -= 255 / EASY_MENU_SET::TIME if @rim_sprite
  539.         @command_window.close_button_window
  540.       end
  541.       Graphics.update
  542.     end until @command_window.show == false
  543.   end
  544.   #--------------------------------------------------------------------------
  545.   # ● 生成指令窗口
  546.   #--------------------------------------------------------------------------
  547.   def create_command_window
  548.     v = EASY_MENU_SET::BUTTON
  549.     @command_window = Window_MenuCommand.new
  550.     for i in 0...EASY_MENU_SET::BUTTON.size
  551.       type = :command_item     if v[i][4] == :item
  552.       type = :command_key_item if v[i][4] == :key_item
  553.       type = :command_save     if v[i][4] == :save
  554.       type = :command_load     if v[i][4] == :continue
  555.       type = :command_game_end if v[i][4] == :game_end
  556.       @command_window.set_handler(v[i][4], method(type)) if v[i][0]
  557.     end
  558.     @command_window.set_handler(:cancel,    method(:return_scene))
  559.   end
  560.   #--------------------------------------------------------------------------
  561.   # ● 指令“物品”
  562.   #--------------------------------------------------------------------------
  563.   def command_item
  564.     @sub_show = true
  565.     SceneManager.call(Scene_Item)
  566.     SceneManager.scene.prepare(:item)
  567.   end
  568.   #--------------------------------------------------------------------------
  569.   # ● 指令“贵重物品”
  570.   #--------------------------------------------------------------------------
  571.   def command_key_item
  572.     @sub_show = true
  573.     SceneManager.call(Scene_Item)
  574.     SceneManager.scene.prepare(:key_item)
  575.   end
  576.   #--------------------------------------------------------------------------
  577.   # ● 指令“存档”
  578.   #--------------------------------------------------------------------------
  579.   def command_save
  580.     @sub_show = true
  581.     SceneManager.call(Scene_Save)
  582.   end
  583.   #--------------------------------------------------------------------------
  584.   # ● 指令“读档”
  585.   #--------------------------------------------------------------------------
  586.   def command_load
  587.     @sub_show = true
  588.     SceneManager.call(Scene_Load)
  589.   end
  590. end



  594. #==============================================================================
  595. # ■ SceneManager
  596. #==============================================================================
  597. module SceneManager
  598.   #--------------------------------------------------------------------------
  599.   # ● 模块的实例变量
  600.   #--------------------------------------------------------------------------
  601.   @save_bitmap = nil                # 存档用截图
  602.   #--------------------------------------------------------------------------
  603.   # ● 生成背景用的场景截图
  604.   #--------------------------------------------------------------------------
  605.   def self.snapshot_for_background(bitmap_blue = true)
  606.     @background_bitmap.dispose if @background_bitmap
  607.     @background_bitmap = Graphics.snap_to_bitmap
  608.     @background_bitmap.blur if bitmap_blue
  609.   end
  610.   #--------------------------------------------------------------------------
  611.   # ● 生成存档内的截图
  612.   #--------------------------------------------------------------------------
  613.   def self.snapshot_for_save_bitmap
  614.     v = EASY_MENU_SET::FILES_DETAILS_DATA
  615.     @save_bitmap.dispose if @save_bitmap
  616.     @save_bitmap = Bitmap.new(v[0][3], v[0][4])
  617.     rect = Rect.new(0, 0, v[0][3], v[0][4])
  618.     rect.x = $game_player.screen_x - rect.width / 2
  619.     rect.y = $game_player.screen_y - rect.height / 2 - 12
  620.     bitmap = Graphics.snap_to_bitmap
  621.     @save_bitmap.blt(0, 0, bitmap, rect)
  622.     bitmap.dispose
  623.   end
  624.   #--------------------------------------------------------------------------
  625.   # ● 获取存档内的截图
  626.   #--------------------------------------------------------------------------
  627.   def self.saves_bitmap
  628.     @save_bitmap
  629.   end
  630. end

  632. #==============================================================================
  633. # ■ Scene_Map
  634. #==============================================================================
  635. class Scene_Map < Scene_Base
  636.   #--------------------------------------------------------------------------
  637.   # ● 结束处理
  638.   #--------------------------------------------------------------------------
  639.   def terminate
  640.     super
  641.     type = EASY_MENU_SET::BACKGROUND[4]
  642.     type = true if SceneManager.scene_is?(Scene_Battle)
  643.     SceneManager.snapshot_for_background(type)
  644.     SceneManager.snapshot_for_save_bitmap
  645.     dispose_spriteset
  646.     perform_battle_transition if SceneManager.scene_is?(Scene_Battle)
  647.   end
  648. end


  651. #==============================================================================
  652. # ★ 物品界面
  653. #==============================================================================
  654. #==============================================================================
  655. # ■ Window_ItemList
  656. #==============================================================================
  657. class Window_ItemList < Window_Selectable
  658.   #--------------------------------------------------------------------------
  659.   # ● 初始化对象
  660.   #--------------------------------------------------------------------------
  661.   def initialize(x, y, width, height)
  662.     super
  663.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  664.     self.opacity = EASY_MENU_SET::ITEMLIST[2]
  665.     @category = :none
  666.     @data = []
  667.   end
  668.   #--------------------------------------------------------------------------
  669.   # ● 获取标准的边距尺寸
  670.   #--------------------------------------------------------------------------
  671.   def standard_padding
  672.     return 16
  673.   end
  674.   #--------------------------------------------------------------------------
  675.   # ● 获取列数
  676.   #--------------------------------------------------------------------------
  677.   def col_max
  678.     return 1
  679.   end
  680.   #--------------------------------------------------------------------------
  681.   # ● 绘制项目
  682.   #--------------------------------------------------------------------------
  683.   alias easy_menu_draw_item draw_item
  684.   def draw_item(index)
  685.     easy_menu_font
  686.     easy_menu_draw_item(index)
  687.   end
  688.   #--------------------------------------------------------------------------
  689.   # ● 绘制物品个数
  690.   #--------------------------------------------------------------------------
  691.   def draw_item_number(rect, item)
  692.     return if $game_party.item_number(item) <= 1
  693.     draw_text(rect, sprintf("%02d", $game_party.item_number(item)), 2)
  694.   end
  695.   #--------------------------------------------------------------------------
  696.   # ● 绘制物品名称
  697.   #     enabled : 有效的标志。false 的时候使用半透明效果绘制
  698.   #--------------------------------------------------------------------------
  699.   def draw_item_name(item, x, y, enabled = true, width = 172)
  700.     return unless item
  701.     draw_icon(item.icon_index, x, y, enabled)
  702.     change_color(normal_color, enabled)
  703.     draw_text_ex(x + 24, y, item.name)
  704.     #draw_text(x + 24, y, width, line_height, item.name)
  705.   end
  706.   #--------------------------------------------------------------------------
  707.   # ● 重置字体设置
  708.   #--------------------------------------------------------------------------
  709.   def reset_font_settings
  710.     change_color(normal_color)
  711.     easy_menu_font
  712.   end
  713.   #--------------------------------------------------------------------------
  714.   # ● 更新帮助内容
  715.   #--------------------------------------------------------------------------
  716.   def update_help
  717.     @help_window.set_item(item)
  718.     @big_icon.set_item(item.big_icon) if EASY_MENU_SET::BIGICON[0]
  719.   end
  720.   #--------------------------------------------------------------------------
  721.   # ● 设置物品窗口
  722.   #--------------------------------------------------------------------------
  723.   def big_icon=(big_icon)
  724.     @big_icon = big_icon
  725.     update
  726.   end
  727. end

  729. #==============================================================================
  730. # ■ BIG ICON
  731. #==============================================================================
  732. module Cache
  733.   def self.bigicon(filename)
  734.     load_bitmap(EASY_MENU_SET::BIGICON_Cache, filename)
  735.   end
  736. end

  738. #==============================================================================
  739. # ■ RPG::BaseItem
  740. #==============================================================================
  741. class RPG::BaseItem
  742.   #--------------------------------------------------------------------------
  743.   # ● 获取大图标
  744.   #--------------------------------------------------------------------------
  745.   def big_icon
  746.     self.note =~ /\<BigIcon (\w+)\>/i
  747.     $1.nil? ? "" : $1
  748.   end
  749. end

  751. #==============================================================================
  752. # ■ Window_Big_icon
  753. #==============================================================================
  754. class Window_Big_icon < Window_Base
  755.   #--------------------------------------------------------------------------
  756.   # ● 初始化对象
  757.   #--------------------------------------------------------------------------
  758.   def initialize(x, y, width, height)
  759.     super(x, y, width, height)
  760.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  761.     self.opacity = EASY_MENU_SET::BIGICON[6]
  762.   end
  763.   #--------------------------------------------------------------------------
  764.   # ● 设置内容
  765.   #--------------------------------------------------------------------------
  766.   def set_item(icon)
  767.     if icon != @icon
  768.       contents.clear
  769.       bitmap = Cache.bigicon(icon)
  770.       x = (contents.width - bitmap.width) / 2
  771.       y = (contents.height - bitmap.height) / 2
  772.       rect = Rect.new(0, 0, bitmap.width, bitmap.height)
  773.       contents.blt(x, y, bitmap, rect)
  774.       @icon = icon
  775.     end
  776.   end
  777. end

  779. #==============================================================================
  780. # ■ Scene_ItemBase
  781. #==============================================================================
  782. class Scene_ItemBase < Scene_MenuBase
  783.   #--------------------------------------------------------------------------
  784.   # ● 生成角色窗口
  785.   #--------------------------------------------------------------------------
  786.   def create_actor_window
  787.     @actor_window = Window_MenuActor.new
  788.     @actor_window.set_handler(:ok,     method(:on_actor_ok))
  789.     @actor_window.set_handler(:cancel, method(:on_actor_cancel))
  790.   end
  791.   #--------------------------------------------------------------------------
  792.   # ● 显示子窗口
  793.   #--------------------------------------------------------------------------
  794.   alias easy_menu_show_sub_window show_sub_window
  795.   def show_sub_window(window)
  796.     window.y = (Graphics.height - @actor_window.height) / 2
  797.     easy_menu_show_sub_window(window)
  798.     @actor_window.z = 200
  799.   end
  800. end

  802. #==============================================================================
  803. # ■ Scene_Item
  804. #==============================================================================
  805. class Scene_Item < Scene_ItemBase
  806.   #--------------------------------------------------------------------------
  807.   # ● 预处理
  808.   #--------------------------------------------------------------------------
  809.   def prepare(mode = :item)
  810.     @mode = mode
  811.   end
  812.   #--------------------------------------------------------------------------
  813.   # ● 开始处理
  814.   #--------------------------------------------------------------------------
  815.   def start
  816.     super
  817.     v = EASY_MENU_SET::ITEM_RIM
  818.     create_rim_background(v[0], v[1], v[2]) if v[0]
  819.     create_actor_cg unless EASY_MENU_SET::BIGICON[0]
  820.     create_help_window
  821.     create_big_icon_window if EASY_MENU_SET::BIGICON[0]
  822.     create_item_window
  823.     create_sub_button
  824.   end
  825.   #--------------------------------------------------------------------------
  826.   # ● 生成物品窗口
  827.   #--------------------------------------------------------------------------
  828.   def create_item_window
  829.     sp = EASY_MENU_SET::COMMAND[1]
  830.     iy = sp + EASY_MENU_SET::COMMAND[3] - 8
  831.     ih = Graphics.height - @help_window.height - sp - iy
  832.     @item_window = Window_ItemList.new(sp, iy, @help_window.width, ih)
  833.     @item_window.category = @mode
  834.     @item_window.viewport = @viewport
  835.     @item_window.help_window = @help_window
  836.     @item_window.big_icon = @big_icon_window if EASY_MENU_SET::BIGICON[0]
  837.     @item_window.set_handler(:ok,     method(:on_item_ok))
  838.     @item_window.set_handler(:cancel, method(:on_item_cancel))
  839.     @item_window.index = 0
  840.     @item_window.activate
  841.   end
  842.   #--------------------------------------------------------------------------
  843.   # ● 生成帮助窗口
  844.   #--------------------------------------------------------------------------
  845.   def create_help_window
  846.     sp = EASY_MENU_SET::COMMAND[1]
  847.     v = EASY_MENU_SET::ITEMLIST
  848.     w = v[0] > 0 ? v[0] : (Graphics.width / 2 - sp)
  849.     @help_window = Window_Help.new(v[1], w)
  850.     @help_window.viewport = @viewport
  851.     @help_window.x = sp
  852.     @help_window.y = Graphics.height - @help_window.height - sp
  853.   end
  854.   #--------------------------------------------------------------------------
  855.   # ● 生成物品大图标
  856.   #--------------------------------------------------------------------------
  857.   def create_big_icon_window
  858.     sp = EASY_MENU_SET::COMMAND[1]
  859.     v = EASY_MENU_SET::BIGICON
  860.     b = []
  861.     if v[1]
  862.       b[0] = @help_window.width + sp
  863.       b[1] = sp + EASY_MENU_SET::COMMAND[3] - 8
  864.       b[2] = Graphics.width - b[0] - sp
  865.       b[3] = Graphics.height - b[1] - sp
  866.     else
  867.       b = [v[2], v[3], v[4], v[5]]
  868.     end
  869.     @big_icon_window = Window_Big_icon.new(b[0], b[1], b[2], b[3])
  870.     @big_icon_window.viewport = @viewport
  871.   end
  872.   #--------------------------------------------------------------------------
  873.   # ● 物品“取消”
  874.   #--------------------------------------------------------------------------
  875.   def on_item_cancel
  876.     @item_window.unselect
  877.     return_scene
  878.   end
  879. end


  882. #==============================================================================
  883. # ★ 存档界面
  884. #==============================================================================
  885. #==============================================================================
  886. # ■ Window_SaveFileList
  887. #------------------------------------------------------------------------------
  888. # 　存档的选项窗口（左）
  889. #==============================================================================
  890. class Window_SaveFileList < Window_Selectable
  891.   #--------------------------------------------------------------------------
  892.   # ● 初始化对象
  893.   #--------------------------------------------------------------------------
  894.   def initialize(x, y, width, height)
  895.     super
  896.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  897.     self.opacity = EASY_MENU_SET::FILESLIST[4]
  898.     @symbol = nil
  899.     refresh
  900.     activate
  901.   end
  902.   #--------------------------------------------------------------------------
  903.   # ● 获取可显示的存档数目
  904.   #--------------------------------------------------------------------------
  905.   def visible_max
  906.     return EASY_MENU_SET::FILESLIST[1]
  907.   end
  908.   #--------------------------------------------------------------------------
  909.   # ● 获取项目的高度
  910.   #--------------------------------------------------------------------------
  911.   def item_height
  912.     (height - standard_padding * 2) / visible_max
  913.   end
  914.   #--------------------------------------------------------------------------
  915.   # ● 存档数量最大值
  916.   #--------------------------------------------------------------------------
  917.   def item_max
  918.     return EASY_MENU_SET::FILES_MAX
  919.   end
  920.   #--------------------------------------------------------------------------
  921.   # ● 绘制项目
  922.   #--------------------------------------------------------------------------
  923.   def draw_item(index)
  924.     header = DataManager.load_header(index)
  925.     rect = item_rect_for_text(index)
  926.     ry = (item_height - line_height) / 2
  927.     easy_menu_font
  928.     v = EASY_MENU_SET::FILESLIST
  929.     change_color(Color.new(v[3][0][0], v[3][0][1], v[3][0][2]), header)
  930.     icon_id = header ? v[2][1] : v[2][0]
  931.     draw_icon(icon_id, rect.x + 4, rect.y + ry)
  932.     text = @symbol == :save ? EASY_MENU_SET::SAVING : EASY_MENU_SET::LOADING
  933.     ing = @index == index && @symbol
  934.     name = ing ? text : (Vocab::File + " #{index + 1}")
  935.     draw_text(rect.x + 28, rect.y + ry, rect.width, line_height, name)
  936.     change_color(Color.new(v[3][1][0], v[3][1][1], v[3][1][2]), header)
  937.     draw_playtime(header, rect.x - 4, rect.y + ry, rect.width, 2)
  938.   end
  939.   #--------------------------------------------------------------------------
  940.   # ● 绘制游戏时间
  941.   #--------------------------------------------------------------------------
  942.   def draw_playtime(header, x, y, width, align)
  943.     text = header ? header[:playtime_s] : "—:—:—"
  944.     draw_text(x, y, width, line_height, text, 2)
  945.   end
  946.   #--------------------------------------------------------------------------
  947.   # ● 设置选择状态
  948.   #--------------------------------------------------------------------------
  949.   def set_files(symbol)
  950.     @symbol = symbol
  951.     refresh
  952.   end
  953. end


  956. #==============================================================================
  957. # ■ Window_FilesDetails
  958. #------------------------------------------------------------------------------
  959. # 　存档的详细窗口（右）
  960. #==============================================================================
  961. class Window_FilesDetails < Window_Base
  962.   #--------------------------------------------------------------------------
  963.   # ● 初始化对象
  964.   #--------------------------------------------------------------------------
  965.   def initialize(x, y, width, height)
  966.     super(x, y, width, height)
  967.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  968.     self.opacity = EASY_MENU_SET::FILES_DETAILS[6]
  969.     @bitmaps = []
  970.     @header = []
  971.   end
  972.   #--------------------------------------------------------------------------
  973.   # ● 释放
  974.   #--------------------------------------------------------------------------
  975.   def dispose
  976.     for bitmap in @bitmaps
  977.       next if bitmap == nil or bitmap.disposed?
  978.       bitmap.dispose
  979.     end
  980.     super
  981.   end
  982.   #--------------------------------------------------------------------------
  983.   # ● 设置选择状态
  984.   #--------------------------------------------------------------------------
  985.   def set_select(select)
  986.     return if @select == select
  987.     @select = select
  988.     refresh(@select)
  989.   end
  990.   #--------------------------------------------------------------------------
  991.   # ● 读取文件
  992.   #--------------------------------------------------------------------------
  993.   def read_save_data(index)
  994.     @header[index] = DataManager.load_header(index)
  995.     @bitmaps[index].dispose if @bitmaps[index]
  996.     return unless EASY_MENU_SET::FILES_DETAILS_DATA[0][0]
  997.     @bitmaps[index] = DataManager.load_save_bitmap(index)
  998.   end
  999.   #--------------------------------------------------------------------------
  1000.   # ● 刷新
  1001.   #--------------------------------------------------------------------------
  1002.   def refresh(index)
  1003.     contents.clear
  1004.     read_save_data(index)
  1005.     v = EASY_MENU_SET::FILES_DETAILS_DATA
  1006.     draw_background(@header[index], v)
  1007.     return unless @header[index]
  1008.     draw_save_bitmap(@header[index], index, v)
  1009.     draw_party_characters(@header[index], index, v)
  1010.     draw_party_faces(@header[index], index, v)
  1011.   end
  1012.   #--------------------------------------------------------------------------
  1013.   # ● 绘制 底图
  1014.   #--------------------------------------------------------------------------
  1015.   def draw_background(header, v)
  1016.     return unless v[3][0]
  1017.     return if (!header && v[3][1] == false)
  1018.     bitmap = Cache.system(v[3][2])
  1019.     contents.blt(v[3][3], v[3][4], bitmap, Rect.new(0, 0, v[3][5], v[3][6]))
  1020.   end
  1021.   #--------------------------------------------------------------------------
  1022.   # ● 绘制截图
  1023.   #--------------------------------------------------------------------------
  1024.   def draw_save_bitmap(header, index, v)
  1025.     return unless v[0][0]
  1026.     bitmap = @bitmaps[index]
  1027.     #bx = (width - standard_padding * 2 - bitmap.width) / 2
  1028.     contents.blt(v[0][1], v[0][2], bitmap, bitmap.rect)
  1029.   end
  1030.   #--------------------------------------------------------------------------
  1031.   # ● 绘制队伍角色行走图
  1032.   #--------------------------------------------------------------------------
  1033.   def draw_party_characters(header, index, v)
  1034.     return unless v[1][0]
  1035.     x = v[1][1]
  1036.     y = v[1][2]
  1037.     header[:characters].each_with_index do |data, i|
  1038.       draw_character(data[0], data[1], x + i * 48, y)
  1039.     end
  1040.   end
  1041.   #--------------------------------------------------------------------------
  1042.   # ● 绘制队伍角色脸谱
  1043.   #--------------------------------------------------------------------------
  1044.   def draw_party_faces(header, index, v)
  1045.     return unless v[2][0]
  1046.     x = v[2][1]
  1047.     y = v[2][2]
  1048.     header[:characters].each_with_index do |data, i|
  1049.       bit = Cache.face(data[2])
  1050.       rx = bit.width / 4
  1051.       draw_face(data[2], data[3], x + i * rx, y)
  1052.     end
  1053.   end
  1054.   #--------------------------------------------------------------------------
  1055.   # ● 绘制角色肖像图
  1056.   #     enabled : 有效的标志。false 的时候使用半透明效果绘制
  1057.   #--------------------------------------------------------------------------
  1058.   def draw_face(face_name, face_index, x, y, enabled = true)
  1059.     bitmap = Cache.face(face_name)
  1060.     w = bitmap.width / 4
  1061.     h = bitmap.height / 2
  1062.     rect = Rect.new(face_index % 4 * w, face_index / 4 * h, w, h)
  1063.     contents.blt(x + 4, y, bitmap, rect, enabled ? 255 : translucent_alpha)
  1064.     bitmap.dispose
  1065.   end
  1066. end

  1068. #==============================================================================
  1069. # ■ Scene_File
  1070. #==============================================================================
  1071. class Scene_File < Scene_MenuBase
  1072.   #--------------------------------------------------------------------------
  1073.   # ● 开始处理
  1074.   #--------------------------------------------------------------------------
  1075.   def start
  1076.     super
  1077.     v = EASY_MENU_SET::FILES_RIM
  1078.     create_rim_background(v[0], v[1], v[2]) if v[0]
  1079.     create_actor_cg unless EASY_MENU_SET::FILES_DETAILS[0]
  1080.     create_help_window if EASY_MENU_SET::FILESLIST[5]
  1081.     create_savefile_windows
  1082.     create_details_window if EASY_MENU_SET::FILES_DETAILS[0]
  1083.     create_sub_button
  1084.     init_selection
  1085.   end
  1086.   #--------------------------------------------------------------------------
  1087.   # ● 结束处理
  1088.   #--------------------------------------------------------------------------
  1089.   def terminate
  1090.     super
  1091.   end
  1092.   #--------------------------------------------------------------------------
  1093.   # ● 更新画面
  1094.   #--------------------------------------------------------------------------
  1095.   def update
  1096.     super
  1097.     @details_window.set_select(@savefile_window.index) if @details_window
  1098.   end
  1099.   #--------------------------------------------------------------------------
  1100.   # ● 生成帮助窗口
  1101.   #--------------------------------------------------------------------------
  1102.   def create_help_window
  1103.     sp = EASY_MENU_SET::COMMAND[1]
  1104.     v = EASY_MENU_SET::FILESLIST
  1105.     w = v[0] > 0 ? v[0] : (Graphics.width / 2 - sp)
  1106.     @help_window = Window_Help.new(1, w)
  1107.     @help_window.set_text(help_window_text)
  1108.     @help_window.x = sp
  1109.     @help_window.y = sp + EASY_MENU_SET::COMMAND[3] - 8
  1110.   end
  1111.   #--------------------------------------------------------------------------
  1112.   # ● 获取帮助窗口的文本
  1113.   #--------------------------------------------------------------------------
  1114.   def help_window_text
  1115.     return ""
  1116.   end
  1117.   #--------------------------------------------------------------------------
  1118.   # ● 生成存档文件窗口
  1119.   #--------------------------------------------------------------------------
  1120.   def create_savefile_windows
  1121.     sp = EASY_MENU_SET::COMMAND[1]
  1122.     hy = sp + EASY_MENU_SET::COMMAND[3] - 8
  1123.     sy = @help_window ? (@help_window.y + @help_window.height) : hy
  1124.     v = EASY_MENU_SET::FILESLIST
  1125.     sw = v[0] > 0 ? v[0] : (Graphics.width / 2 - sp)
  1126.     sh = Graphics.height - sy - sp
  1127.     @savefile_window = Window_SaveFileList.new(sp, sy, sw, sh)
  1128.     @savefile_window.set_handler(:ok,     method(:on_savefile_ok))
  1129.     @savefile_window.set_handler(:cancel, method(:on_savefile_cancel))
  1130.   end
  1131.   #--------------------------------------------------------------------------
  1132.   # ● 生成详细文件窗口
  1133.   #--------------------------------------------------------------------------
  1134.   def create_details_window
  1135.     sp = EASY_MENU_SET::COMMAND[1]
  1136.     v = EASY_MENU_SET::FILES_DETAILS
  1137.     d = []
  1138.     if v[1]
  1139.       d[0] = @savefile_window.width + sp
  1140.       d[1] = @help_window.y
  1141.       d[2] = Graphics.width - d[0] - sp
  1142.       d[3] = Graphics.height - d[1] - sp
  1143.     else
  1144.       d = [v[2], v[3], v[4], v[5]]
  1145.     end
  1146.     @details_window = Window_FilesDetails.new(d[0], d[1], d[2], d[3])
  1147.   end
  1148.   #--------------------------------------------------------------------------
  1149.   # ● 初始化选择状态
  1150.   #--------------------------------------------------------------------------
  1151.   def init_selection
  1152.     index = first_savefile_index
  1153.     @savefile_window.select(index)
  1154.     @details_window.set_select(index) if @details_window
  1155.   end
  1156. end


  1159. #==============================================================================
  1160. # ■ Scene_Save
  1161. #==============================================================================
  1162. class Scene_Save < Scene_File
  1163.   #--------------------------------------------------------------------------
  1164.   # ● 开始处理
  1165.   #--------------------------------------------------------------------------
  1166.   def start
  1167.     Window_MenuCommand::init_command_position(:save)
  1168.     super
  1169.   end
  1170.   #--------------------------------------------------------------------------
  1171.   # ● 确定存档文件
  1172.   #--------------------------------------------------------------------------
  1173.   def on_savefile_ok
  1174.     super
  1175.     if DataManager.save_game(@savefile_window.index)
  1176.       on_save_success
  1177.     else
  1178.       Sound.play_buzzer
  1179.     end
  1180.   end
  1181.   #--------------------------------------------------------------------------
  1182.   # ● 存档成功时的处理
  1183.   #--------------------------------------------------------------------------
  1184.   def on_save_success
  1185.     Sound.play_save
  1186.     @savefile_window.set_files(:save)
  1187.     @details_window.refresh(@savefile_window.index) if @details_window
  1188.     Graphics.wait(30)
  1189.     if EASY_MENU_SET::FILES_RETURN
  1190.       return_scene
  1191.     else
  1192.       @savefile_window.set_files(nil)
  1193.       @savefile_window.activate
  1194.     end
  1195.   end
  1196. end


  1199. #==============================================================================
  1200. # ■ Scene_Load
  1201. #==============================================================================
  1202. class Scene_Load < Scene_File
  1203.   #--------------------------------------------------------------------------
  1204.   # ● 开始处理
  1205.   #--------------------------------------------------------------------------
  1206.   def start
  1207.     Window_MenuCommand::init_command_position(:continue)
  1208.     super
  1209.   end
  1210.   #--------------------------------------------------------------------------
  1211.   # ● 确定读档文件
  1212.   #--------------------------------------------------------------------------
  1213.   def on_savefile_ok
  1214.     super
  1215.     if DataManager.load_game(@savefile_window.index)
  1216.       on_load_success
  1217.     else
  1218.       Sound.play_buzzer
  1219.     end
  1220.   end
  1221.   #--------------------------------------------------------------------------
  1222.   # ● 读档成功时的处理
  1223.   #--------------------------------------------------------------------------
  1224.   def on_load_success
  1225.     Sound.play_load
  1226.     @savefile_window.set_files(:continue)
  1227.     Graphics.wait(20)
  1228.     fadeout_all
  1229.     $game_system.on_after_load
  1230.     SceneManager.goto(Scene_Map)
  1231.   end
  1232. end


  1235. #==============================================================================
  1236. # ■ DataManager
  1237. #==============================================================================
  1238. module DataManager
  1239.   #--------------------------------------------------------------------------
  1240.   # ● 判定存档文件是否存在
  1241.   #--------------------------------------------------------------------------
  1242.   def self.save_file_exists?
  1243.     if savefile_folder == ""
  1244.       text = 'Save*.rvdata2'
  1245.     else
  1246.       text = savefile_folder + '/Save*.rvdata2'
  1247.     end
  1248.     !Dir.glob(text).empty?
  1249.   end
  1250.   #--------------------------------------------------------------------------
  1251.   # ● 存档文件的最大数
  1252.   #--------------------------------------------------------------------------
  1253.   def self.savefile_max
  1254.     max = EASY_MENU_SET::FILES_MAX ? EASY_MENU_SET::FILES_MAX : 16
  1255.     return max
  1256.   end
  1257.   #--------------------------------------------------------------------------
  1258.   # ● 生成父文件夹
  1259.   #--------------------------------------------------------------------------
  1260.   def self.savefile_folder
  1261.     return EASY_MENU_SET::FILES_NAME
  1262.   end
  1263.   #--------------------------------------------------------------------------
  1264.   # ● 生成文件名
  1265.   #     index : 文件索引
  1266.   #--------------------------------------------------------------------------
  1267.   def self.make_filename(index)
  1268.     filename = sprintf("Save%02d.rvdata2", index + 1)
  1269.     if savefile_folder == ""
  1270.       return filename
  1271.     else
  1272.       return savefile_folder + "/" + filename
  1273.     end
  1274.   end
  1275.   #--------------------------------------------------------------------------
  1276.   # ● 生成截图
  1277.   #--------------------------------------------------------------------------
  1278.   def self.make_save_bitmap
  1279.     bitmap = set_bitmap_array(SceneManager.saves_bitmap)
  1280.     bitmap
  1281.   end
  1282.   #--------------------------------------------------------------------------
  1283.   # ● 获取截图
  1284.   #--------------------------------------------------------------------------
  1285.   def self.load_save_bitmap(index)
  1286.     begin
  1287.       File.open(make_filename(index), "rb") do |file|
  1288.         Marshal.load(file)
  1289.         return read_bitmap_array(Marshal.load(file))
  1290.       end
  1291.     rescue
  1292.       return nil
  1293.     end
  1294.   end
  1295.   #--------------------------------------------------------------------------
  1296.   # ● 制作截图文件 by 老鹰
  1297.   #--------------------------------------------------------------------------
  1298.   def self.set_bitmap_array(bitmap)
  1299.     data = []
  1300.     bitmap.height.times do |i| # 行号
  1301.       data[i] = []
  1302.       bitmap.width.times do |j| # 列号
  1303.         color = bitmap.get_pixel(j, i)
  1304.         data[i][j] = [color.red, color.green, color.blue]
  1305.       end
  1306.     end
  1307.     data
  1308.   end
  1309.   #--------------------------------------------------------------------------
  1310.   # ● 获取截图文件 by 老鹰
  1311.   #--------------------------------------------------------------------------
  1312.   def self.read_bitmap_array(array)
  1313.     h = array.size # 行数
  1314.     w = array[0].size # 列数
  1315.     bitmap = Bitmap.new(w, h)
  1316.     h.times do |i|
  1317.       w.times do |j|
  1318.         data = array[i][j]
  1319.         color = Color.new(data[0], data[1], data[2])
  1320.         bitmap.set_pixel(j, i, color)
  1321.       end
  1322.     end
  1323.     bitmap
  1324.   end
  1325.   #--------------------------------------------------------------------------
  1326.   # ● 执行存档（没有错误处理）
  1327.   #--------------------------------------------------------------------------
  1328.   def self.save_game_without_rescue(index)
  1329.     unless FileTest.directory?(savefile_folder)
  1330.       Dir::mkdir(savefile_folder)
  1331.     end
  1332.     File.open(make_filename(index), "wb") do |file|
  1333.       $game_system.on_before_save
  1334.       Marshal.dump(make_save_header, file)
  1335.       Marshal.dump(make_save_bitmap, file)
  1336.       Marshal.dump(make_save_contents, file)
  1337.       @last_savefile_index = index
  1338.     end
  1339.     return true
  1340.   end
  1341.   #--------------------------------------------------------------------------
  1342.   # ● 执行读档（没有错误处理）
  1343.   #--------------------------------------------------------------------------
  1344.   def self.load_game_without_rescue(index)
  1345.     File.open(make_filename(index), "rb") do |file|
  1346.       Marshal.load(file)
  1347.       Marshal.load(file)
  1348.       extract_save_contents(Marshal.load(file))
  1349.       reload_map_if_updated
  1350.       @last_savefile_index = index
  1351.     end
  1352.     return true
  1353.   end
  1354. end

  1356. #==============================================================================
  1357. # ■ Game_Party
  1358. #==============================================================================
  1359. class Game_Party < Game_Unit
  1360.   #--------------------------------------------------------------------------
  1361.   # ● 存档文件显示用的角色图像信息
  1362.   #--------------------------------------------------------------------------
  1363.   def characters_for_savefile
  1364.     battle_members.collect do |actor|
  1365.       [actor.character_name, actor.character_index,
  1366.        actor.face_name, actor.face_index]
  1367.     end
  1368.   end
  1369. end


  1372. #==============================================================================
  1373. # ■ Window_MenuStatus
  1374. #==============================================================================
  1375. class Window_MenuStatus < Window_Selectable
  1376.   #--------------------------------------------------------------------------
  1377.   # ● 获取窗口的宽度
  1378.   #--------------------------------------------------------------------------
  1379.   def window_width
  1380.     Graphics.width - 160 - 96
  1381.   end
  1382.   #--------------------------------------------------------------------------
  1383.   # ● 获取窗口的高度
  1384.   #--------------------------------------------------------------------------
  1385.   def window_height
  1386.     Graphics.height > 416 ? 416 : Graphics.height
  1387.   end
  1388. end

  1390. #==============================================================================
  1391. # ■ Window_GameEnd
  1392. #==============================================================================
  1393. class Window_GameEnd < Window_Command
  1394.   #--------------------------------------------------------------------------
  1395.   # ● 初始化对象
  1396.   #--------------------------------------------------------------------------
  1397.   alias easy_menu_initialize initialize
  1398.   def initialize
  1399.     easy_menu_initialize
  1400.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  1401.   end
  1402. end
复制代码
作者: 最初の結果    时间: 2021-4-4 22:26
alexncf125 发表于 2021-2-15 18:18
把·CONG'S EASY MENU由第1089行class Scene_File < Scene_MenuBase开始,
至到1374行module DataManager的 ...

我的是这样的，怎么弄？大佬，能教教我吗？
作者: 最初の結果    时间: 2021-4-4 22:27
alexncf125 发表于 2021-2-15 18:18
把·CONG'S EASY MENU由第1089行class Scene_File < Scene_MenuBase开始,
至到1374行module DataManager的 ...
  1. #encoding:utf-8
  2. #==============================================================================
  3. # ◇ CONG'S EASY MENU ◇ 葱式解谜用简易菜单
  4. #------------------------------------------------------------------------------
  5. # By Conwsbn
  6. # http://congrm.lofter.com/
  7. #==============================================================================

  9. $imported = {} if $imported.nil?
  10. $imported[:congs_easy_menu] = true

  12. #==============================================================================
  13. # ■ Window_Base
  14. #==============================================================================
  15. class Window_Base < Window
  16.   #--------------------------------------------------------------------------
  17.   # ● 获取统一字体设置
  18.   #--------------------------------------------------------------------------
  19.   def easy_menu_font
  20.     contents.font.name = EASY_MENU_SET::Font_name
  21.     contents.font.size = EASY_MENU_SET::Font_size
  22.     contents.font.outline = EASY_MENU_SET::Font_outline
  23.     contents.font.shadow = EASY_MENU_SET::Font_shadow
  24.     contents.font.bold = EASY_MENU_SET::Font_bold
  25.     contents.font.italic = EASY_MENU_SET::Font_italic
  26.   end
  27. end

  29. #==============================================================================
  30. # ■ Window_Help
  31. #==============================================================================
  32. class Window_Help < Window_Base
  33.   #--------------------------------------------------------------------------
  34.   # ● 初始化对象
  35.   #--------------------------------------------------------------------------
  36.   def initialize(line_number = 2, width = Graphics.width)
  37.     super(0, 0, width, fitting_height(line_number))
  38.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  39.     self.opacity = EASY_MENU_SET::HELP_opacity
  40.   end
  41.   #--------------------------------------------------------------------------
  42.   # ● 设置内容
  43.   #--------------------------------------------------------------------------
  44.   def set_text(text)
  45.     text.gsub!(/\\n/i) { "\n" }
  46.     if text != @text
  47.       @text = text
  48.       refresh
  49.     end
  50.   end
  51.   #--------------------------------------------------------------------------
  52.   # ● 清除
  53.   #--------------------------------------------------------------------------
  54.   def clear
  55.     set_text("")
  56.   end
  57.   #--------------------------------------------------------------------------
  58.   # ● 设置物品
  59.   #     item : 技能、物品等
  60.   #--------------------------------------------------------------------------
  61.   def set_item(item)
  62.     set_text(item ? item.description : "")
  63.   end
  64.   #--------------------------------------------------------------------------
  65.   # ● 绘制带有控制符的文本内容
  66.   #--------------------------------------------------------------------------
  67.   def draw_text_ex(x, y, text)
  68.     reset_item_font_settings
  69.     text = convert_escape_characters(text)
  70.     pos = {:x => x, :y => y, :new_x => x, :height => calc_line_height(text)}
  71.     process_character(text.slice!(0, 1), text, pos) until text.empty?
  72.   end
  73.   #--------------------------------------------------------------------------
  74.   # ● 物品帮助字体设置
  75.   #--------------------------------------------------------------------------
  76.   def reset_item_font_settings
  77.     return if @text_line
  78.     contents.font.name = EASY_MENU_SET::HELP_name
  79.     contents.font.size = EASY_MENU_SET::HELP_size
  80.     contents.font.outline = EASY_MENU_SET::HELP_outline
  81.     contents.font.shadow = EASY_MENU_SET::HELP_shadow
  82.     contents.font.bold = EASY_MENU_SET::HELP_bold
  83.     contents.font.italic = EASY_MENU_SET::HELP_italic
  84.     v = EASY_MENU_SET::HELP_color
  85.     change_color(Color.new(v[0], v[1], v[2]))
  86.   end
  87.   #--------------------------------------------------------------------------
  88.   # ● 获取文字颜色
  89.   #--------------------------------------------------------------------------
  90.   def text_color(n)
  91.     v = EASY_MENU_SET::HELP_color
  92.     return Color.new(v[0], v[1], v[2]) if n == 0
  93.     return windowskin.get_pixel(64 + (n % 8) * 8, 96 + (n / 8) * 8)
  94.   end
  95.   #--------------------------------------------------------------------------
  96.   # ● 处理普通文字
  97.   #--------------------------------------------------------------------------
  98.   def process_normal_character(c, pos)
  99.     if (pos[:x] + contents.text_size(c).width) > contents.width
  100.       @text_line = true
  101.       process_new_line(c, pos)
  102.       @text_line = false
  103.       pos[:height] = calc_line_height(c)
  104.     end
  105.     text_width = text_size(c).width
  106.     draw_text(pos[:x], pos[:y], text_width * 2, pos[:height], c)
  107.     pos[:x] += text_width
  108.   end
  109.   #--------------------------------------------------------------------------
  110.   # ● 刷新
  111.   #--------------------------------------------------------------------------
  112.   def refresh
  113.     contents.clear
  114.     draw_text_ex(4, 0, @text)
  115.   end
  116. end

  118. #==============================================================================
  119. # ■ Window_MenuCommand
  120. #==============================================================================
  121. class Window_MenuCommand < Window_Command
  122.   #--------------------------------------------------------------------------
  123.   # ● 初始化指令选择位置（类方法）
  124.   #--------------------------------------------------------------------------
  125.   def self.init_command_position(type = nil)
  126.     @@last_command_symbol = type
  127.   end
  128.   #--------------------------------------------------------------------------
  129.   # ● 初始化对象
  130.   #--------------------------------------------------------------------------
  131.   def initialize(sub = false)
  132.     @sub = sub
  133.     super(-24, EASY_MENU_SET::COMMAND[1])
  134.     self.opacity = 0
  135.     self.active = false
  136.     @show = false
  137.     @move_rx = @sub_ry = 0
  138.     @last_index = @index
  139.     update_placement unless @sub
  140.     select_last
  141.     refresh
  142.   end
  143.   #--------------------------------------------------------------------------
  144.   # ● 获取标准的边距尺寸
  145.   #--------------------------------------------------------------------------
  146.   def standard_padding
  147.     return 0
  148.   end
  149.   #--------------------------------------------------------------------------
  150.   # ● 显示动画前的设定
  151.   #--------------------------------------------------------------------------
  152.   def update_placement
  153.     self.x = -24 - window_width
  154.     self.contents_opacity = 0
  155.   end
  156.   #--------------------------------------------------------------------------
  157.   # ● 获取窗口的宽度
  158.   #--------------------------------------------------------------------------
  159.   def window_width
  160.     return EASY_MENU_SET::COMMAND[2] + 24 + 24
  161.   end
  162.   #--------------------------------------------------------------------------
  163.   # ● 获取项目的宽度
  164.   #--------------------------------------------------------------------------
  165.   def item_width
  166.     width - 24
  167.   end
  168.   #--------------------------------------------------------------------------
  169.   # ● 获取间隔距离
  170.   #--------------------------------------------------------------------------
  171.   def line_spacing
  172.     return EASY_MENU_SET::COMMAND[4]
  173.   end
  174.   #--------------------------------------------------------------------------
  175.   # ● 获取行高
  176.   #--------------------------------------------------------------------------
  177.   def line_height
  178.     return EASY_MENU_SET::COMMAND[3] + line_spacing
  179.   end
  180.   #--------------------------------------------------------------------------
  181.   # ● 获取指令名称
  182.   #--------------------------------------------------------------------------
  183.   def set_command_name(v)
  184.     @name = []
  185.     for i in 0...EASY_MENU_SET::BUTTON.size
  186.       name = Vocab::item     if v[i][4] == :item
  187.       name = Vocab::key_item if v[i][4] == :key_item
  188.       name = Vocab::save     if v[i][4] == :save
  189.       name = Vocab::continue if v[i][4] == :continue
  190.       name = Vocab::game_end if v[i][4] == :game_end
  191.       @name[i] = v[i][1] ? v[i][1] : name
  192.     end
  193.   end
  194.   #--------------------------------------------------------------------------
  195.   # ● 获取显示状态
  196.   #--------------------------------------------------------------------------
  197.   def set_command_enabled(v)
  198.     @enabled = []
  199.     for i in 0...EASY_MENU_SET::BUTTON.size
  200.       enabled = main_commands_enabled         if v[i][4] == :item
  201.       enabled = main_commands_enabled         if v[i][4] == :key_item
  202.       enabled = save_enabled                  if v[i][4] == :save
  203.       enabled = DataManager.save_file_exists? if v[i][4] == :continue
  204.       enabled = true                          if v[i][4] == :game_end
  205.       @enabled[i] = enabled
  206.     end
  207.   end
  208.   #--------------------------------------------------------------------------
  209.   # ● 获取指令图标
  210.   #--------------------------------------------------------------------------
  211.   def set_command_icon(v)
  212.     @icon = []
  213.     for i in 0...EASY_MENU_SET::BUTTON.size
  214.       @icon[i] = v[i][2] if v[i][2]
  215.     end
  216.   end
  217.   #--------------------------------------------------------------------------
  218.   # ● 获取选项的图标
  219.   #--------------------------------------------------------------------------
  220.   def command_icon(index)
  221.     @list[index][:ext]
  222.   end
  223.   #--------------------------------------------------------------------------
  224.   # ● 生成指令列表
  225.   #--------------------------------------------------------------------------
  226.   def make_command_list
  227.     v = EASY_MENU_SET::BUTTON
  228.     set_command_name(v)
  229.     set_command_icon(v)
  230.     set_command_enabled(v)
  231.     for i in 0...EASY_MENU_SET::BUTTON.size
  232.       add_command(@name[i], v[i][4], @enabled[i], @icon[i]) if v[i][0] or @sub
  233.     end
  234.   end
  235.   #--------------------------------------------------------------------------
  236.   # ● 刷新
  237.   #--------------------------------------------------------------------------
  238.   def refresh
  239.     #clear_command_list
  240.     #make_command_list
  241.     create_contents
  242.     contents.clear
  243.     draw_all_items
  244.   end
  245.   #--------------------------------------------------------------------------
  246.   # ● 绘制项目
  247.   #--------------------------------------------------------------------------
  248.   def draw_item(index)
  249.     return if @sub && @index != index
  250.     easy_menu_font
  251.     rect = item_rect_for_text(index)
  252.     t_size = text_size(command_name(index))
  253.     mx = @index == index ? @sub ? 0 : @move_rx : 0
  254.     my = @sub ? @sub_ry : 0
  255.     ix = item_width - t_size.width - 28 + mx
  256.     iy = (line_height - t_size.height) / 2 + my
  257.     draw_background(index, rect, mx, my)
  258.     rect.x -= 24
  259.     rect.y -= (line_spacing / 2)
  260.     enabled = command_enabled?(index)
  261.     change_color(item_color(index), enabled)
  262.     rt = [rect.x + mx, rect.y + my, rect.width, rect.height]
  263.     draw_text(rt[0], rt[1], rt[2], rt[3], command_name(index), 2)
  264.     draw_icon(command_icon(index), rect.x + ix, rect.y + iy, enabled)
  265.   end
  266.   #--------------------------------------------------------------------------
  267.   # ● 绘制底纹
  268.   #--------------------------------------------------------------------------
  269.   def draw_background(index, rect, x, y)
  270.     lh = line_height - line_spacing
  271.     bit = Cache.system(EASY_MENU_SET::COMMAND[0])
  272.     rx = bit.width - item_width
  273.     rect1 = Rect.new(rx, 0, item_width, 12)
  274.     rect2 = Rect.new(rx, 12, item_width, 12)
  275.     rect3 = Rect.new(rx, 36 - 12, item_width, 12)
  276.     d_rect = Rect.new(rect.x + x, rect.y + 12 + y, item_width, lh - 24)
  277.     self.contents.blt(rect.x + x, rect.y + y, bit, rect1)
  278.     self.contents.stretch_blt(d_rect, bit, rect2)
  279.     self.contents.blt(rect.x + x, rect.y + lh - 12 + y, bit, rect3)
  280.   end
  281.   #--------------------------------------------------------------------------
  282.   # ● 字体颜色扩展
  283.   #--------------------------------------------------------------------------
  284.   def item_color(index)
  285.     co = EASY_MENU_SET::BUTTON[index][3]
  286.     return Color.new(co[0], co[1], co[2]) if @index == index
  287.     return Color.new(co[0], co[1], co[2], 200)
  288.   end
  289.   #--------------------------------------------------------------------------
  290.   # ● 获取项目的绘制矩形
  291.   #--------------------------------------------------------------------------
  292.   def item_rect(index)
  293.     index = 0 if @sub
  294.     rect = Rect.new
  295.     rect.width = 4
  296.     rect.height = 24
  297.     rect.x = index % col_max * (item_width + spacing) + 32
  298.     rect.y = index / col_max * item_height + 4
  299.     rect
  300.   end
  301.   #--------------------------------------------------------------------------
  302.   # ● 获取项目的绘制矩形（内容用）
  303.   #--------------------------------------------------------------------------
  304.   def item_rect_for_text(index)
  305.     index = 0 if @sub
  306.     rect = Rect.new
  307.     rect.width = item_width
  308.     rect.height = item_height
  309.     rect.x = index % col_max * (item_width + spacing)
  310.     rect.y = index / col_max * item_height
  311.     rect
  312.   end
  313.   #--------------------------------------------------------------------------
  314.   # ● 展开动画的标志
  315.   #--------------------------------------------------------------------------
  316.   def show=(show)
  317.     if @show != show
  318.       @show = show
  319.     end
  320.   end
  321.   #--------------------------------------------------------------------------
  322.   # ● 获取动画的标志
  323.   #--------------------------------------------------------------------------
  324.   def show
  325.     return @show
  326.   end
  327.   #--------------------------------------------------------------------------
  328.   # ● 更新画面
  329.   #--------------------------------------------------------------------------
  330.   def update
  331.     super
  332.     if @last_index != @index && !@show
  333.       @move_rx = 0
  334.       @last_index = @index
  335.     end
  336.     update_button if Input.dir4 > 0 or @move_rx < 24
  337.   end
  338.   #--------------------------------------------------------------------------
  339.   # ● 按钮的改变动画
  340.   #--------------------------------------------------------------------------
  341.   def update_button
  342.     @move_rx += 4 if @move_rx < 24
  343.     refresh
  344.   end
  345.   #--------------------------------------------------------------------------
  346.   # ● 按钮的还原动画
  347.   #--------------------------------------------------------------------------
  348.   def hide_button
  349.     @move_rx -= 4 if @move_rx > 0
  350.     refresh
  351.   end
  352.   #--------------------------------------------------------------------------
  353.   # ● 展开动画
  354.   #--------------------------------------------------------------------------
  355.   def open_button_window
  356.     self.x += (window_width + 24) / EASY_MENU_SET::TIME
  357.     self.contents_opacity += 255 / EASY_MENU_SET::TIME
  358.     refresh
  359.     @show = false if self.x >= -24
  360.     self.x = -24 if !@show
  361.     self.contents_opacity = 255 if !@show
  362.   end
  363.   #--------------------------------------------------------------------------
  364.   # ● 关闭动画
  365.   #--------------------------------------------------------------------------
  366.   def close_button_window
  367.     @show = false if self.contents_opacity <= 0
  368.     if @move_rx > 0
  369.       hide_button
  370.     else
  371.       self.x -= (window_width + 24) / EASY_MENU_SET::TIME
  372.       self.contents_opacity -= 255 / EASY_MENU_SET::TIME
  373.       refresh
  374.     end
  375.   end
  376.   #--------------------------------------------------------------------------
  377.   # ● 进入子菜单的关闭动画
  378.   #--------------------------------------------------------------------------
  379.   def close_window_to_sub
  380.     if @move_rx > 0
  381.       hide_button
  382.       @sub_ry = @index / col_max * item_height
  383.     else
  384.       cursor_rect.empty
  385.       @show = false if @sub_ry <= 0
  386.       @sub_ry = 0 if !@show
  387.       @sub = true
  388.       @sub_ry = [(@sub_ry - ((EASY_MENU_SET::COMMAND[3] * index)) / 6), 0].max
  389.       refresh
  390.     end
  391.   end
  392. end

  394. #==============================================================================
  395. # ■ Scene_MenuBase
  396. #==============================================================================
  397. class Scene_MenuBase < Scene_Base
  398.   #--------------------------------------------------------------------------
  399.   # ● 结束处理
  400.   #--------------------------------------------------------------------------
  401.   alias easy_menu_terminate terminate
  402.   def terminate
  403.     easy_menu_terminate
  404.     dispose_rim
  405.     dispose_actor_cg
  406.     dispose_sub_button
  407.   end
  408.   #--------------------------------------------------------------------------
  409.   # ● 生成背景
  410.   #--------------------------------------------------------------------------
  411.   def create_background
  412.     wall = EASY_MENU_SET::WALLPAPER
  413.     co = EASY_MENU_SET::BACKGROUND
  414.     @background_sprite = Sprite.new
  415.     bitmap = wall ? Cache.system(wall) : SceneManager.background_bitmap
  416.     @background_sprite.bitmap = bitmap
  417.     @background_sprite.color.set(co[0], co[1], co[2], co[3]) unless wall
  418.   end
  419.   #--------------------------------------------------------------------------
  420.   # ● 绘制次背景图片
  421.   #--------------------------------------------------------------------------
  422.   def create_rim_background(bitmap, x, y)
  423.     @rim_sprite = Sprite.new
  424.     @rim_sprite.bitmap = Cache.system(bitmap) if bitmap
  425.     @rim_sprite.x = x; @rim_sprite.y = y
  426.     @rim_sprite.z = @background_sprite.z
  427.   end
  428.   #--------------------------------------------------------------------------
  429.   # ● 释放次背景图片
  430.   #--------------------------------------------------------------------------
  431.   def dispose_rim
  432.     return if !@rim_sprite
  433.     @rim_sprite.bitmap.dispose
  434.     @rim_sprite.dispose
  435.   end
  436.   #--------------------------------------------------------------------------
  437.   # ● 生成立绘精灵
  438.   #--------------------------------------------------------------------------
  439.   def create_actor_cg
  440.     v = EASY_MENU_SET::CG
  441.     return unless v[0]
  442.     @actor_cg = Sprite.new
  443.     @actor_cg.bitmap = Cache.system(v[0])
  444.     @actor_cg.x = v[1] + 2 * 7
  445.     @actor_cg.y = v[2]
  446.   end
  447.   #--------------------------------------------------------------------------
  448.   # ● 立绘的坐标判断
  449.   #--------------------------------------------------------------------------
  450.   def cg_x
  451.     v = EASY_MENU_SET::CG
  452.     return v[3] if v[4] == :l
  453.     return -(v[3]) if v[4] == :r
  454.     return 0
  455.   end
  456.   #--------------------------------------------------------------------------
  457.   # ● 释放立绘精灵
  458.   #--------------------------------------------------------------------------
  459.   def dispose_actor_cg
  460.     return if !@actor_cg
  461.     @actor_cg.bitmap.dispose
  462.     @actor_cg.dispose
  463.   end
  464.   #--------------------------------------------------------------------------
  465.   # ● 展开动画的预设坐标
  466.   #--------------------------------------------------------------------------
  467.   def set_menu_xy
  468.     v = EASY_MENU_SET::CG
  469.     xx = 0
  470.     xx = -(EASY_MENU_SET::TIME * v[3]) if v[4] == :l
  471.     xx = EASY_MENU_SET::TIME * v[3] if v[4] == :r
  472.     @actor_cg.x = v[1] + xx
  473.     @actor_cg.opacity = 0
  474.     @rim_sprite.opacity = 0 if @rim_sprite
  475.   end
  476.   #--------------------------------------------------------------------------
  477.   # ● 重绘内用小标题
  478.   #--------------------------------------------------------------------------
  479.   def create_sub_button
  480.     @sub_window = Window_MenuCommand.new(true)
  481.     @sub_window.z = 300
  482.   end
  483.   #--------------------------------------------------------------------------
  484.   # ● 释放内用小标题
  485.   #--------------------------------------------------------------------------
  486.   def dispose_sub_button
  487.     @sub_window.dispose if @sub_window
  488.   end
  489. end

  491. #==============================================================================
  492. # ■ Scene_Menu
  493. #==============================================================================
  494. class Scene_Menu < Scene_MenuBase
  495.   #--------------------------------------------------------------------------
  496.   # ● 开始处理
  497.   #--------------------------------------------------------------------------
  498.   def start
  499.     super
  500.     v = EASY_MENU_SET::MENU_RIM
  501.     create_rim_background(v[0], v[1], v[2]) if v[0]
  502.     create_actor_cg
  503.     create_command_window
  504.     set_menu_xy
  505.     @sub_show = false
  506.   end
  507.   #--------------------------------------------------------------------------
  508.   # ● 开始后处理
  509.   #--------------------------------------------------------------------------
  510.   def post_start
  511.     super
  512.     @command_window.show = true
  513.     begin
  514.       @actor_cg.x += cg_x
  515.       @actor_cg.opacity += (255 / EASY_MENU_SET::TIME)
  516.       @rim_sprite.opacity += (255 / EASY_MENU_SET::TIME) if @rim_sprite
  517.       @command_window.open_button_window
  518.       Graphics.update
  519.     end until @command_window.show == false
  520.     @command_window.activate
  521.     @actor_cg.opacity = 255
  522.   end
  523.   #--------------------------------------------------------------------------
  524.   # ● 结束前处理
  525.   #--------------------------------------------------------------------------
  526.   def pre_terminate
  527.     super
  528.     t = 0
  529.     @command_window.show = true
  530.     begin
  531.       if @sub_show
  532.         t += 1 if t <= 6
  533.         @actor_cg.x += 2 if t <= 6
  534.         @command_window.close_window_to_sub
  535.       else
  536.         @actor_cg.x += -(cg_x)
  537.         @actor_cg.opacity -= 255 / EASY_MENU_SET::TIME
  538.         @rim_sprite.opacity -= 255 / EASY_MENU_SET::TIME if @rim_sprite
  539.         @command_window.close_button_window
  540.       end
  541.       Graphics.update
  542.     end until @command_window.show == false
  543.   end
  544.   #--------------------------------------------------------------------------
  545.   # ● 生成指令窗口
  546.   #--------------------------------------------------------------------------
  547.   def create_command_window
  548.     v = EASY_MENU_SET::BUTTON
  549.     @command_window = Window_MenuCommand.new
  550.     for i in 0...EASY_MENU_SET::BUTTON.size
  551.       type = :command_item     if v[i][4] == :item
  552.       type = :command_key_item if v[i][4] == :key_item
  553.       type = :command_save     if v[i][4] == :save
  554.       type = :command_load     if v[i][4] == :continue
  555.       type = :command_game_end if v[i][4] == :game_end
  556.       @command_window.set_handler(v[i][4], method(type)) if v[i][0]
  557.     end
  558.     @command_window.set_handler(:cancel,    method(:return_scene))
  559.   end
  560.   #--------------------------------------------------------------------------
  561.   # ● 指令“物品”
  562.   #--------------------------------------------------------------------------
  563.   def command_item
  564.     @sub_show = true
  565.     SceneManager.call(Scene_Item)
  566.     SceneManager.scene.prepare(:item)
  567.   end
  568.   #--------------------------------------------------------------------------
  569.   # ● 指令“贵重物品”
  570.   #--------------------------------------------------------------------------
  571.   def command_key_item
  572.     @sub_show = true
  573.     SceneManager.call(Scene_Item)
  574.     SceneManager.scene.prepare(:key_item)
  575.   end
  576.   #--------------------------------------------------------------------------
  577.   # ● 指令“存档”
  578.   #--------------------------------------------------------------------------
  579.   def command_save
  580.     @sub_show = true
  581.     SceneManager.call(Scene_Save)
  582.   end
  583.   #--------------------------------------------------------------------------
  584.   # ● 指令“读档”
  585.   #--------------------------------------------------------------------------
  586.   def command_load
  587.     @sub_show = true
  588.     SceneManager.call(Scene_Load)
  589.   end
  590. end



  594. #==============================================================================
  595. # ■ SceneManager
  596. #==============================================================================
  597. module SceneManager
  598.   #--------------------------------------------------------------------------
  599.   # ● 模块的实例变量
  600.   #--------------------------------------------------------------------------
  601.   @save_bitmap = nil                # 存档用截图
  602.   #--------------------------------------------------------------------------
  603.   # ● 生成背景用的场景截图
  604.   #--------------------------------------------------------------------------
  605.   def self.snapshot_for_background(bitmap_blue = true)
  606.     @background_bitmap.dispose if @background_bitmap
  607.     @background_bitmap = Graphics.snap_to_bitmap
  608.     @background_bitmap.blur if bitmap_blue
  609.   end
  610.   #--------------------------------------------------------------------------
  611.   # ● 生成存档内的截图
  612.   #--------------------------------------------------------------------------
  613.   def self.snapshot_for_save_bitmap
  614.     v = EASY_MENU_SET::FILES_DETAILS_DATA
  615.     @save_bitmap.dispose if @save_bitmap
  616.     @save_bitmap = Bitmap.new(v[0][3], v[0][4])
  617.     rect = Rect.new(0, 0, v[0][3], v[0][4])
  618.     rect.x = $game_player.screen_x - rect.width / 2
  619.     rect.y = $game_player.screen_y - rect.height / 2 - 12
  620.     bitmap = Graphics.snap_to_bitmap
  621.     @save_bitmap.blt(0, 0, bitmap, rect)
  622.     bitmap.dispose
  623.   end
  624.   #--------------------------------------------------------------------------
  625.   # ● 获取存档内的截图
  626.   #--------------------------------------------------------------------------
  627.   def self.saves_bitmap
  628.     @save_bitmap
  629.   end
  630. end

  632. #==============================================================================
  633. # ■ Scene_Map
  634. #==============================================================================
  635. class Scene_Map < Scene_Base
  636.   #--------------------------------------------------------------------------
  637.   # ● 结束处理
  638.   #--------------------------------------------------------------------------
  639.   def terminate
  640.     super
  641.     type = EASY_MENU_SET::BACKGROUND[4]
  642.     type = true if SceneManager.scene_is?(Scene_Battle)
  643.     SceneManager.snapshot_for_background(type)
  644.     SceneManager.snapshot_for_save_bitmap
  645.     dispose_spriteset
  646.     perform_battle_transition if SceneManager.scene_is?(Scene_Battle)
  647.   end
  648. end


  651. #==============================================================================
  652. # ★ 物品界面
  653. #==============================================================================
  654. #==============================================================================
  655. # ■ Window_ItemList
  656. #==============================================================================
  657. class Window_ItemList < Window_Selectable
  658.   #--------------------------------------------------------------------------
  659.   # ● 初始化对象
  660.   #--------------------------------------------------------------------------
  661.   def initialize(x, y, width, height)
  662.     super
  663.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  664.     self.opacity = EASY_MENU_SET::ITEMLIST[2]
  665.     @category = :none
  666.     @data = []
  667.   end
  668.   #--------------------------------------------------------------------------
  669.   # ● 获取标准的边距尺寸
  670.   #--------------------------------------------------------------------------
  671.   def standard_padding
  672.     return 16
  673.   end
  674.   #--------------------------------------------------------------------------
  675.   # ● 获取列数
  676.   #--------------------------------------------------------------------------
  677.   def col_max
  678.     return 1
  679.   end
  680.   #--------------------------------------------------------------------------
  681.   # ● 绘制项目
  682.   #--------------------------------------------------------------------------
  683.   alias easy_menu_draw_item draw_item
  684.   def draw_item(index)
  685.     easy_menu_font
  686.     easy_menu_draw_item(index)
  687.   end
  688.   #--------------------------------------------------------------------------
  689.   # ● 绘制物品个数
  690.   #--------------------------------------------------------------------------
  691.   def draw_item_number(rect, item)
  692.     return if $game_party.item_number(item) <= 1
  693.     draw_text(rect, sprintf("%02d", $game_party.item_number(item)), 2)
  694.   end
  695.   #--------------------------------------------------------------------------
  696.   # ● 绘制物品名称
  697.   #     enabled : 有效的标志。false 的时候使用半透明效果绘制
  698.   #--------------------------------------------------------------------------
  699.   def draw_item_name(item, x, y, enabled = true, width = 172)
  700.     return unless item
  701.     draw_icon(item.icon_index, x, y, enabled)
  702.     change_color(normal_color, enabled)
  703.     draw_text_ex(x + 24, y, item.name)
  704.     #draw_text(x + 24, y, width, line_height, item.name)
  705.   end
  706.   #--------------------------------------------------------------------------
  707.   # ● 重置字体设置
  708.   #--------------------------------------------------------------------------
  709.   def reset_font_settings
  710.     change_color(normal_color)
  711.     easy_menu_font
  712.   end
  713.   #--------------------------------------------------------------------------
  714.   # ● 更新帮助内容
  715.   #--------------------------------------------------------------------------
  716.   def update_help
  717.     @help_window.set_item(item)
  718.     @big_icon.set_item(item.big_icon) if EASY_MENU_SET::BIGICON[0]
  719.   end
  720.   #--------------------------------------------------------------------------
  721.   # ● 设置物品窗口
  722.   #--------------------------------------------------------------------------
  723.   def big_icon=(big_icon)
  724.     @big_icon = big_icon
  725.     update
  726.   end
  727. end

  729. #==============================================================================
  730. # ■ BIG ICON
  731. #==============================================================================
  732. module Cache
  733.   def self.bigicon(filename)
  734.     load_bitmap(EASY_MENU_SET::BIGICON_Cache, filename)
  735.   end
  736. end

  738. #==============================================================================
  739. # ■ RPG::BaseItem
  740. #==============================================================================
  741. class RPG::BaseItem
  742.   #--------------------------------------------------------------------------
  743.   # ● 获取大图标
  744.   #--------------------------------------------------------------------------
  745.   def big_icon
  746.     self.note =~ /\<BigIcon (\w+)\>/i
  747.     $1.nil? ? "" : $1
  748.   end
  749. end

  751. #==============================================================================
  752. # ■ Window_Big_icon
  753. #==============================================================================
  754. class Window_Big_icon < Window_Base
  755.   #--------------------------------------------------------------------------
  756.   # ● 初始化对象
  757.   #--------------------------------------------------------------------------
  758.   def initialize(x, y, width, height)
  759.     super(x, y, width, height)
  760.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  761.     self.opacity = EASY_MENU_SET::BIGICON[6]
  762.   end
  763.   #--------------------------------------------------------------------------
  764.   # ● 设置内容
  765.   #--------------------------------------------------------------------------
  766.   def set_item(icon)
  767.     if icon != @icon
  768.       contents.clear
  769.       bitmap = Cache.bigicon(icon)
  770.       x = (contents.width - bitmap.width) / 2
  771.       y = (contents.height - bitmap.height) / 2
  772.       rect = Rect.new(0, 0, bitmap.width, bitmap.height)
  773.       contents.blt(x, y, bitmap, rect)
  774.       @icon = icon
  775.     end
  776.   end
  777. end

  779. #==============================================================================
  780. # ■ Scene_ItemBase
  781. #==============================================================================
  782. class Scene_ItemBase < Scene_MenuBase
  783.   #--------------------------------------------------------------------------
  784.   # ● 生成角色窗口
  785.   #--------------------------------------------------------------------------
  786.   def create_actor_window
  787.     @actor_window = Window_MenuActor.new
  788.     @actor_window.set_handler(:ok,     method(:on_actor_ok))
  789.     @actor_window.set_handler(:cancel, method(:on_actor_cancel))
  790.   end
  791.   #--------------------------------------------------------------------------
  792.   # ● 显示子窗口
  793.   #--------------------------------------------------------------------------
  794.   alias easy_menu_show_sub_window show_sub_window
  795.   def show_sub_window(window)
  796.     window.y = (Graphics.height - @actor_window.height) / 2
  797.     easy_menu_show_sub_window(window)
  798.     @actor_window.z = 200
  799.   end
  800. end

  802. #==============================================================================
  803. # ■ Scene_Item
  804. #==============================================================================
  805. class Scene_Item < Scene_ItemBase
  806.   #--------------------------------------------------------------------------
  807.   # ● 预处理
  808.   #--------------------------------------------------------------------------
  809.   def prepare(mode = :item)
  810.     @mode = mode
  811.   end
  812.   #--------------------------------------------------------------------------
  813.   # ● 开始处理
  814.   #--------------------------------------------------------------------------
  815.   def start
  816.     super
  817.     v = EASY_MENU_SET::ITEM_RIM
  818.     create_rim_background(v[0], v[1], v[2]) if v[0]
  819.     create_actor_cg unless EASY_MENU_SET::BIGICON[0]
  820.     create_help_window
  821.     create_big_icon_window if EASY_MENU_SET::BIGICON[0]
  822.     create_item_window
  823.     create_sub_button
  824.   end
  825.   #--------------------------------------------------------------------------
  826.   # ● 生成物品窗口
  827.   #--------------------------------------------------------------------------
  828.   def create_item_window
  829.     sp = EASY_MENU_SET::COMMAND[1]
  830.     iy = sp + EASY_MENU_SET::COMMAND[3] - 8
  831.     ih = Graphics.height - @help_window.height - sp - iy
  832.     @item_window = Window_ItemList.new(sp, iy, @help_window.width, ih)
  833.     @item_window.category = @mode
  834.     @item_window.viewport = @viewport
  835.     @item_window.help_window = @help_window
  836.     @item_window.big_icon = @big_icon_window if EASY_MENU_SET::BIGICON[0]
  837.     @item_window.set_handler(:ok,     method(:on_item_ok))
  838.     @item_window.set_handler(:cancel, method(:on_item_cancel))
  839.     @item_window.index = 0
  840.     @item_window.activate
  841.   end
  842.   #--------------------------------------------------------------------------
  843.   # ● 生成帮助窗口
  844.   #--------------------------------------------------------------------------
  845.   def create_help_window
  846.     sp = EASY_MENU_SET::COMMAND[1]
  847.     v = EASY_MENU_SET::ITEMLIST
  848.     w = v[0] > 0 ? v[0] : (Graphics.width / 2 - sp)
  849.     @help_window = Window_Help.new(v[1], w)
  850.     @help_window.viewport = @viewport
  851.     @help_window.x = sp
  852.     @help_window.y = Graphics.height - @help_window.height - sp
  853.   end
  854.   #--------------------------------------------------------------------------
  855.   # ● 生成物品大图标
  856.   #--------------------------------------------------------------------------
  857.   def create_big_icon_window
  858.     sp = EASY_MENU_SET::COMMAND[1]
  859.     v = EASY_MENU_SET::BIGICON
  860.     b = []
  861.     if v[1]
  862.       b[0] = @help_window.width + sp
  863.       b[1] = sp + EASY_MENU_SET::COMMAND[3] - 8
  864.       b[2] = Graphics.width - b[0] - sp
  865.       b[3] = Graphics.height - b[1] - sp
  866.     else
  867.       b = [v[2], v[3], v[4], v[5]]
  868.     end
  869.     @big_icon_window = Window_Big_icon.new(b[0], b[1], b[2], b[3])
  870.     @big_icon_window.viewport = @viewport
  871.   end
  872.   #--------------------------------------------------------------------------
  873.   # ● 物品“取消”
  874.   #--------------------------------------------------------------------------
  875.   def on_item_cancel
  876.     @item_window.unselect
  877.     return_scene
  878.   end
  879. end


  882. #==============================================================================
  883. # ★ 存档界面
  884. #==============================================================================
  885. #==============================================================================
  886. # ■ Window_SaveFileList
  887. #------------------------------------------------------------------------------
  888. # 　存档的选项窗口（左）
  889. #==============================================================================
  890. class Window_SaveFileList < Window_Selectable
  891.   #--------------------------------------------------------------------------
  892.   # ● 初始化对象
  893.   #--------------------------------------------------------------------------
  894.   def initialize(x, y, width, height)
  895.     super
  896.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  897.     self.opacity = EASY_MENU_SET::FILESLIST[4]
  898.     @symbol = nil
  899.     refresh
  900.     activate
  901.   end
  902.   #--------------------------------------------------------------------------
  903.   # ● 获取可显示的存档数目
  904.   #--------------------------------------------------------------------------
  905.   def visible_max
  906.     return EASY_MENU_SET::FILESLIST[1]
  907.   end
  908.   #--------------------------------------------------------------------------
  909.   # ● 获取项目的高度
  910.   #--------------------------------------------------------------------------
  911.   def item_height
  912.     (height - standard_padding * 2) / visible_max
  913.   end
  914.   #--------------------------------------------------------------------------
  915.   # ● 存档数量最大值
  916.   #--------------------------------------------------------------------------
  917.   def item_max
  918.     return EASY_MENU_SET::FILES_MAX
  919.   end
  920.   #--------------------------------------------------------------------------
  921.   # ● 绘制项目
  922.   #--------------------------------------------------------------------------
  923.   def draw_item(index)
  924.     header = DataManager.load_header(index)
  925.     rect = item_rect_for_text(index)
  926.     ry = (item_height - line_height) / 2
  927.     easy_menu_font
  928.     v = EASY_MENU_SET::FILESLIST
  929.     change_color(Color.new(v[3][0][0], v[3][0][1], v[3][0][2]), header)
  930.     icon_id = header ? v[2][1] : v[2][0]
  931.     draw_icon(icon_id, rect.x + 4, rect.y + ry)
  932.     text = @symbol == :save ? EASY_MENU_SET::SAVING : EASY_MENU_SET::LOADING
  933.     ing = @index == index && @symbol
  934.     name = ing ? text : (Vocab::File + " #{index + 1}")
  935.     draw_text(rect.x + 28, rect.y + ry, rect.width, line_height, name)
  936.     change_color(Color.new(v[3][1][0], v[3][1][1], v[3][1][2]), header)
  937.     draw_playtime(header, rect.x - 4, rect.y + ry, rect.width, 2)
  938.   end
  939.   #--------------------------------------------------------------------------
  940.   # ● 绘制游戏时间
  941.   #--------------------------------------------------------------------------
  942.   def draw_playtime(header, x, y, width, align)
  943.     text = header ? header[:playtime_s] : "—:—:—"
  944.     draw_text(x, y, width, line_height, text, 2)
  945.   end
  946.   #--------------------------------------------------------------------------
  947.   # ● 设置选择状态
  948.   #--------------------------------------------------------------------------
  949.   def set_files(symbol)
  950.     @symbol = symbol
  951.     refresh
  952.   end
  953. end


  956. #==============================================================================
  957. # ■ Window_FilesDetails
  958. #------------------------------------------------------------------------------
  959. # 　存档的详细窗口（右）
  960. #==============================================================================
  961. class Window_FilesDetails < Window_Base
  962.   #--------------------------------------------------------------------------
  963.   # ● 初始化对象
  964.   #--------------------------------------------------------------------------
  965.   def initialize(x, y, width, height)
  966.     super(x, y, width, height)
  967.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  968.     self.opacity = EASY_MENU_SET::FILES_DETAILS[6]
  969.     @bitmaps = []
  970.     @header = []
  971.   end
  972.   #--------------------------------------------------------------------------
  973.   # ● 释放
  974.   #--------------------------------------------------------------------------
  975.   def dispose
  976.     for bitmap in @bitmaps
  977.       next if bitmap == nil or bitmap.disposed?
  978.       bitmap.dispose
  979.     end
  980.     super
  981.   end
  982.   #--------------------------------------------------------------------------
  983.   # ● 设置选择状态
  984.   #--------------------------------------------------------------------------
  985.   def set_select(select)
  986.     return if @select == select
  987.     @select = select
  988.     refresh(@select)
  989.   end
  990.   #--------------------------------------------------------------------------
  991.   # ● 读取文件
  992.   #--------------------------------------------------------------------------
  993.   def read_save_data(index)
  994.     @header[index] = DataManager.load_header(index)
  995.     @bitmaps[index].dispose if @bitmaps[index]
  996.     return unless EASY_MENU_SET::FILES_DETAILS_DATA[0][0]
  997.     @bitmaps[index] = DataManager.load_save_bitmap(index)
  998.   end
  999.   #--------------------------------------------------------------------------
  1000.   # ● 刷新
  1001.   #--------------------------------------------------------------------------
  1002.   def refresh(index)
  1003.     contents.clear
  1004.     read_save_data(index)
  1005.     v = EASY_MENU_SET::FILES_DETAILS_DATA
  1006.     draw_background(@header[index], v)
  1007.     return unless @header[index]
  1008.     draw_save_bitmap(@header[index], index, v)
  1009.     draw_party_characters(@header[index], index, v)
  1010.     draw_party_faces(@header[index], index, v)
  1011.   end
  1012.   #--------------------------------------------------------------------------
  1013.   # ● 绘制 底图
  1014.   #--------------------------------------------------------------------------
  1015.   def draw_background(header, v)
  1016.     return unless v[3][0]
  1017.     return if (!header && v[3][1] == false)
  1018.     bitmap = Cache.system(v[3][2])
  1019.     contents.blt(v[3][3], v[3][4], bitmap, Rect.new(0, 0, v[3][5], v[3][6]))
  1020.   end
  1021.   #--------------------------------------------------------------------------
  1022.   # ● 绘制截图
  1023.   #--------------------------------------------------------------------------
  1024.   def draw_save_bitmap(header, index, v)
  1025.     return unless v[0][0]
  1026.     bitmap = @bitmaps[index]
  1027.     #bx = (width - standard_padding * 2 - bitmap.width) / 2
  1028.     contents.blt(v[0][1], v[0][2], bitmap, bitmap.rect)
  1029.   end
  1030.   #--------------------------------------------------------------------------
  1031.   # ● 绘制队伍角色行走图
  1032.   #--------------------------------------------------------------------------
  1033.   def draw_party_characters(header, index, v)
  1034.     return unless v[1][0]
  1035.     x = v[1][1]
  1036.     y = v[1][2]
  1037.     header[:characters].each_with_index do |data, i|
  1038.       draw_character(data[0], data[1], x + i * 48, y)
  1039.     end
  1040.   end
  1041.   #--------------------------------------------------------------------------
  1042.   # ● 绘制队伍角色脸谱
  1043.   #--------------------------------------------------------------------------
  1044.   def draw_party_faces(header, index, v)
  1045.     return unless v[2][0]
  1046.     x = v[2][1]
  1047.     y = v[2][2]
  1048.     header[:characters].each_with_index do |data, i|
  1049.       bit = Cache.face(data[2])
  1050.       rx = bit.width / 4
  1051.       draw_face(data[2], data[3], x + i * rx, y)
  1052.     end
  1053.   end
  1054.   #--------------------------------------------------------------------------
  1055.   # ● 绘制角色肖像图
  1056.   #     enabled : 有效的标志。false 的时候使用半透明效果绘制
  1057.   #--------------------------------------------------------------------------
  1058.   def draw_face(face_name, face_index, x, y, enabled = true)
  1059.     bitmap = Cache.face(face_name)
  1060.     w = bitmap.width / 4
  1061.     h = bitmap.height / 2
  1062.     rect = Rect.new(face_index % 4 * w, face_index / 4 * h, w, h)
  1063.     contents.blt(x + 4, y, bitmap, rect, enabled ? 255 : translucent_alpha)
  1064.     bitmap.dispose
  1065.   end
  1066. end

  1068. #==============================================================================
  1069. # ■ Scene_File
  1070. #==============================================================================
  1071. class Scene_File < Scene_MenuBase
  1072.   #--------------------------------------------------------------------------
  1073.   # ● 开始处理
  1074.   #--------------------------------------------------------------------------
  1075.   def start
  1076.     super
  1077.     v = EASY_MENU_SET::FILES_RIM
  1078.     create_rim_background(v[0], v[1], v[2]) if v[0]
  1079.     create_actor_cg unless EASY_MENU_SET::FILES_DETAILS[0]
  1080.     create_help_window if EASY_MENU_SET::FILESLIST[5]
  1081.     create_savefile_windows
  1082.     create_details_window if EASY_MENU_SET::FILES_DETAILS[0]
  1083.     create_sub_button
  1084.     init_selection
  1085.   end
  1086.   #--------------------------------------------------------------------------
  1087.   # ● 结束处理
  1088.   #--------------------------------------------------------------------------
  1089.   def terminate
  1090.     super
  1091.   end
  1092.   #--------------------------------------------------------------------------
  1093.   # ● 更新画面
  1094.   #--------------------------------------------------------------------------
  1095.   def update
  1096.     super
  1097.     @details_window.set_select(@savefile_window.index) if @details_window
  1098.   end
  1099.   #--------------------------------------------------------------------------
  1100.   # ● 生成帮助窗口
  1101.   #--------------------------------------------------------------------------
  1102.   def create_help_window
  1103.     sp = EASY_MENU_SET::COMMAND[1]
  1104.     v = EASY_MENU_SET::FILESLIST
  1105.     w = v[0] > 0 ? v[0] : (Graphics.width / 2 - sp)
  1106.     @help_window = Window_Help.new(1, w)
  1107.     @help_window.set_text(help_window_text)
  1108.     @help_window.x = sp
  1109.     @help_window.y = sp + EASY_MENU_SET::COMMAND[3] - 8
  1110.   end
  1111.   #--------------------------------------------------------------------------
  1112.   # ● 获取帮助窗口的文本
  1113.   #--------------------------------------------------------------------------
  1114.   def help_window_text
  1115.     return ""
  1116.   end
  1117.   #--------------------------------------------------------------------------
  1118.   # ● 生成存档文件窗口
  1119.   #--------------------------------------------------------------------------
  1120.   def create_savefile_windows
  1121.     sp = EASY_MENU_SET::COMMAND[1]
  1122.     hy = sp + EASY_MENU_SET::COMMAND[3] - 8
  1123.     sy = @help_window ? (@help_window.y + @help_window.height) : hy
  1124.     v = EASY_MENU_SET::FILESLIST
  1125.     sw = v[0] > 0 ? v[0] : (Graphics.width / 2 - sp)
  1126.     sh = Graphics.height - sy - sp
  1127.     @savefile_window = Window_SaveFileList.new(sp, sy, sw, sh)
  1128.     @savefile_window.set_handler(:ok,     method(:on_savefile_ok))
  1129.     @savefile_window.set_handler(:cancel, method(:on_savefile_cancel))
  1130.   end
  1131.   #--------------------------------------------------------------------------
  1132.   # ● 生成详细文件窗口
  1133.   #--------------------------------------------------------------------------
  1134.   def create_details_window
  1135.     sp = EASY_MENU_SET::COMMAND[1]
  1136.     v = EASY_MENU_SET::FILES_DETAILS
  1137.     d = []
  1138.     if v[1]
  1139.       d[0] = @savefile_window.width + sp
  1140.       d[1] = @help_window.y
  1141.       d[2] = Graphics.width - d[0] - sp
  1142.       d[3] = Graphics.height - d[1] - sp
  1143.     else
  1144.       d = [v[2], v[3], v[4], v[5]]
  1145.     end
  1146.     @details_window = Window_FilesDetails.new(d[0], d[1], d[2], d[3])
  1147.   end
  1148.   #--------------------------------------------------------------------------
  1149.   # ● 初始化选择状态
  1150.   #--------------------------------------------------------------------------
  1151.   def init_selection
  1152.     index = first_savefile_index
  1153.     @savefile_window.select(index)
  1154.     @details_window.set_select(index) if @details_window
  1155.   end
  1156. end


  1159. #==============================================================================
  1160. # ■ Scene_Save
  1161. #==============================================================================
  1162. class Scene_Save < Scene_File
  1163.   #--------------------------------------------------------------------------
  1164.   # ● 开始处理
  1165.   #--------------------------------------------------------------------------
  1166.   def start
  1167.     Window_MenuCommand::init_command_position(:save)
  1168.     super
  1169.   end
  1170.   #--------------------------------------------------------------------------
  1171.   # ● 确定存档文件
  1172.   #--------------------------------------------------------------------------
  1173.   def on_savefile_ok
  1174.     super
  1175.     if DataManager.save_game(@savefile_window.index)
  1176.       on_save_success
  1177.     else
  1178.       Sound.play_buzzer
  1179.     end
  1180.   end
  1181.   #--------------------------------------------------------------------------
  1182.   # ● 存档成功时的处理
  1183.   #--------------------------------------------------------------------------
  1184.   def on_save_success
  1185.     Sound.play_save
  1186.     @savefile_window.set_files(:save)
  1187.     @details_window.refresh(@savefile_window.index) if @details_window
  1188.     Graphics.wait(30)
  1189.     if EASY_MENU_SET::FILES_RETURN
  1190.       return_scene
  1191.     else
  1192.       @savefile_window.set_files(nil)
  1193.       @savefile_window.activate
  1194.     end
  1195.   end
  1196. end


  1199. #==============================================================================
  1200. # ■ Scene_Load
  1201. #==============================================================================
  1202. class Scene_Load < Scene_File
  1203.   #--------------------------------------------------------------------------
  1204.   # ● 开始处理
  1205.   #--------------------------------------------------------------------------
  1206.   def start
  1207.     Window_MenuCommand::init_command_position(:continue)
  1208.     super
  1209.   end
  1210.   #--------------------------------------------------------------------------
  1211.   # ● 确定读档文件
  1212.   #--------------------------------------------------------------------------
  1213.   def on_savefile_ok
  1214.     super
  1215.     if DataManager.load_game(@savefile_window.index)
  1216.       on_load_success
  1217.     else
  1218.       Sound.play_buzzer
  1219.     end
  1220.   end
  1221.   #--------------------------------------------------------------------------
  1222.   # ● 读档成功时的处理
  1223.   #--------------------------------------------------------------------------
  1224.   def on_load_success
  1225.     Sound.play_load
  1226.     @savefile_window.set_files(:continue)
  1227.     Graphics.wait(20)
  1228.     fadeout_all
  1229.     $game_system.on_after_load
  1230.     SceneManager.goto(Scene_Map)
  1231.   end
  1232. end


  1235. #==============================================================================
  1236. # ■ DataManager
  1237. #==============================================================================
  1238. module DataManager
  1239.   #--------------------------------------------------------------------------
  1240.   # ● 判定存档文件是否存在
  1241.   #--------------------------------------------------------------------------
  1242.   def self.save_file_exists?
  1243.     if savefile_folder == ""
  1244.       text = 'Save*.rvdata2'
  1245.     else
  1246.       text = savefile_folder + '/Save*.rvdata2'
  1247.     end
  1248.     !Dir.glob(text).empty?
  1249.   end
  1250.   #--------------------------------------------------------------------------
  1251.   # ● 存档文件的最大数
  1252.   #--------------------------------------------------------------------------
  1253.   def self.savefile_max
  1254.     max = EASY_MENU_SET::FILES_MAX ? EASY_MENU_SET::FILES_MAX : 16
  1255.     return max
  1256.   end
  1257.   #--------------------------------------------------------------------------
  1258.   # ● 生成父文件夹
  1259.   #--------------------------------------------------------------------------
  1260.   def self.savefile_folder
  1261.     return EASY_MENU_SET::FILES_NAME
  1262.   end
  1263.   #--------------------------------------------------------------------------
  1264.   # ● 生成文件名
  1265.   #     index : 文件索引
  1266.   #--------------------------------------------------------------------------
  1267.   def self.make_filename(index)
  1268.     filename = sprintf("Save%02d.rvdata2", index + 1)
  1269.     if savefile_folder == ""
  1270.       return filename
  1271.     else
  1272.       return savefile_folder + "/" + filename
  1273.     end
  1274.   end
  1275.   #--------------------------------------------------------------------------
  1276.   # ● 生成截图
  1277.   #--------------------------------------------------------------------------
  1278.   def self.make_save_bitmap
  1279.     bitmap = set_bitmap_array(SceneManager.saves_bitmap)
  1280.     bitmap
  1281.   end
  1282.   #--------------------------------------------------------------------------
  1283.   # ● 获取截图
  1284.   #--------------------------------------------------------------------------
  1285.   def self.load_save_bitmap(index)
  1286.     begin
  1287.       File.open(make_filename(index), "rb") do |file|
  1288.         Marshal.load(file)
  1289.         return read_bitmap_array(Marshal.load(file))
  1290.       end
  1291.     rescue
  1292.       return nil
  1293.     end
  1294.   end
  1295.   #--------------------------------------------------------------------------
  1296.   # ● 制作截图文件 by 老鹰
  1297.   #--------------------------------------------------------------------------
  1298.   def self.set_bitmap_array(bitmap)
  1299.     data = []
  1300.     bitmap.height.times do |i| # 行号
  1301.       data[i] = []
  1302.       bitmap.width.times do |j| # 列号
  1303.         color = bitmap.get_pixel(j, i)
  1304.         data[i][j] = [color.red, color.green, color.blue]
  1305.       end
  1306.     end
  1307.     data
  1308.   end
  1309.   #--------------------------------------------------------------------------
  1310.   # ● 获取截图文件 by 老鹰
  1311.   #--------------------------------------------------------------------------
  1312.   def self.read_bitmap_array(array)
  1313.     h = array.size # 行数
  1314.     w = array[0].size # 列数
  1315.     bitmap = Bitmap.new(w, h)
  1316.     h.times do |i|
  1317.       w.times do |j|
  1318.         data = array[i][j]
  1319.         color = Color.new(data[0], data[1], data[2])
  1320.         bitmap.set_pixel(j, i, color)
  1321.       end
  1322.     end
  1323.     bitmap
  1324.   end
  1325.   #--------------------------------------------------------------------------
  1326.   # ● 执行存档（没有错误处理）
  1327.   #--------------------------------------------------------------------------
  1328.   def self.save_game_without_rescue(index)
  1329.     unless FileTest.directory?(savefile_folder)
  1330.       Dir::mkdir(savefile_folder)
  1331.     end
  1332.     File.open(make_filename(index), "wb") do |file|
  1333.       $game_system.on_before_save
  1334.       Marshal.dump(make_save_header, file)
  1335.       Marshal.dump(make_save_bitmap, file)
  1336.       Marshal.dump(make_save_contents, file)
  1337.       @last_savefile_index = index
  1338.     end
  1339.     return true
  1340.   end
  1341.   #--------------------------------------------------------------------------
  1342.   # ● 执行读档（没有错误处理）
  1343.   #--------------------------------------------------------------------------
  1344.   def self.load_game_without_rescue(index)
  1345.     File.open(make_filename(index), "rb") do |file|
  1346.       Marshal.load(file)
  1347.       Marshal.load(file)
  1348.       extract_save_contents(Marshal.load(file))
  1349.       reload_map_if_updated
  1350.       @last_savefile_index = index
  1351.     end
  1352.     return true
  1353.   end
  1354. end

  1356. #==============================================================================
  1357. # ■ Game_Party
  1358. #==============================================================================
  1359. class Game_Party < Game_Unit
  1360.   #--------------------------------------------------------------------------
  1361.   # ● 存档文件显示用的角色图像信息
  1362.   #--------------------------------------------------------------------------
  1363.   def characters_for_savefile
  1364.     battle_members.collect do |actor|
  1365.       [actor.character_name, actor.character_index,
  1366.        actor.face_name, actor.face_index]
  1367.     end
  1368.   end
  1369. end


  1372. #==============================================================================
  1373. # ■ Window_MenuStatus
  1374. #==============================================================================
  1375. class Window_MenuStatus < Window_Selectable
  1376.   #--------------------------------------------------------------------------
  1377.   # ● 获取窗口的宽度
  1378.   #--------------------------------------------------------------------------
  1379.   def window_width
  1380.     Graphics.width - 160 - 96
  1381.   end
  1382.   #--------------------------------------------------------------------------
  1383.   # ● 获取窗口的高度
  1384.   #--------------------------------------------------------------------------
  1385.   def window_height
  1386.     Graphics.height > 416 ? 416 : Graphics.height
  1387.   end
  1388. end

  1390. #==============================================================================
  1391. # ■ Window_GameEnd
  1392. #==============================================================================
  1393. class Window_GameEnd < Window_Command
  1394.   #--------------------------------------------------------------------------
  1395.   # ● 初始化对象
  1396.   #--------------------------------------------------------------------------
  1397.   alias easy_menu_initialize initialize
  1398.   def initialize
  1399.     easy_menu_initialize
  1400.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  1401.   end
  1402. end
复制代码
作者: 最初の結果    时间: 2021-4-4 22:28
PLeaseS 发表于 2021-2-16 07:14
禁用存档，然后事件写一个？
  1. #encoding:utf-8
  2. #==============================================================================
  3. # ◇ CONG'S EASY MENU ◇ 葱式解谜用简易菜单
  4. #------------------------------------------------------------------------------
  5. # By Conwsbn
  6. # http://congrm.lofter.com/
  7. #==============================================================================

  9. $imported = {} if $imported.nil?
  10. $imported[:congs_easy_menu] = true

  12. #==============================================================================
  13. # ■ Window_Base
  14. #==============================================================================
  15. class Window_Base < Window
  16.   #--------------------------------------------------------------------------
  17.   # ● 获取统一字体设置
  18.   #--------------------------------------------------------------------------
  19.   def easy_menu_font
  20.     contents.font.name = EASY_MENU_SET::Font_name
  21.     contents.font.size = EASY_MENU_SET::Font_size
  22.     contents.font.outline = EASY_MENU_SET::Font_outline
  23.     contents.font.shadow = EASY_MENU_SET::Font_shadow
  24.     contents.font.bold = EASY_MENU_SET::Font_bold
  25.     contents.font.italic = EASY_MENU_SET::Font_italic
  26.   end
  27. end

  29. #==============================================================================
  30. # ■ Window_Help
  31. #==============================================================================
  32. class Window_Help < Window_Base
  33.   #--------------------------------------------------------------------------
  34.   # ● 初始化对象
  35.   #--------------------------------------------------------------------------
  36.   def initialize(line_number = 2, width = Graphics.width)
  37.     super(0, 0, width, fitting_height(line_number))
  38.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  39.     self.opacity = EASY_MENU_SET::HELP_opacity
  40.   end
  41.   #--------------------------------------------------------------------------
  42.   # ● 设置内容
  43.   #--------------------------------------------------------------------------
  44.   def set_text(text)
  45.     text.gsub!(/\\n/i) { "\n" }
  46.     if text != @text
  47.       @text = text
  48.       refresh
  49.     end
  50.   end
  51.   #--------------------------------------------------------------------------
  52.   # ● 清除
  53.   #--------------------------------------------------------------------------
  54.   def clear
  55.     set_text("")
  56.   end
  57.   #--------------------------------------------------------------------------
  58.   # ● 设置物品
  59.   #     item : 技能、物品等
  60.   #--------------------------------------------------------------------------
  61.   def set_item(item)
  62.     set_text(item ? item.description : "")
  63.   end
  64.   #--------------------------------------------------------------------------
  65.   # ● 绘制带有控制符的文本内容
  66.   #--------------------------------------------------------------------------
  67.   def draw_text_ex(x, y, text)
  68.     reset_item_font_settings
  69.     text = convert_escape_characters(text)
  70.     pos = {:x => x, :y => y, :new_x => x, :height => calc_line_height(text)}
  71.     process_character(text.slice!(0, 1), text, pos) until text.empty?
  72.   end
  73.   #--------------------------------------------------------------------------
  74.   # ● 物品帮助字体设置
  75.   #--------------------------------------------------------------------------
  76.   def reset_item_font_settings
  77.     return if @text_line
  78.     contents.font.name = EASY_MENU_SET::HELP_name
  79.     contents.font.size = EASY_MENU_SET::HELP_size
  80.     contents.font.outline = EASY_MENU_SET::HELP_outline
  81.     contents.font.shadow = EASY_MENU_SET::HELP_shadow
  82.     contents.font.bold = EASY_MENU_SET::HELP_bold
  83.     contents.font.italic = EASY_MENU_SET::HELP_italic
  84.     v = EASY_MENU_SET::HELP_color
  85.     change_color(Color.new(v[0], v[1], v[2]))
  86.   end
  87.   #--------------------------------------------------------------------------
  88.   # ● 获取文字颜色
  89.   #--------------------------------------------------------------------------
  90.   def text_color(n)
  91.     v = EASY_MENU_SET::HELP_color
  92.     return Color.new(v[0], v[1], v[2]) if n == 0
  93.     return windowskin.get_pixel(64 + (n % 8) * 8, 96 + (n / 8) * 8)
  94.   end
  95.   #--------------------------------------------------------------------------
  96.   # ● 处理普通文字
  97.   #--------------------------------------------------------------------------
  98.   def process_normal_character(c, pos)
  99.     if (pos[:x] + contents.text_size(c).width) > contents.width
  100.       @text_line = true
  101.       process_new_line(c, pos)
  102.       @text_line = false
  103.       pos[:height] = calc_line_height(c)
  104.     end
  105.     text_width = text_size(c).width
  106.     draw_text(pos[:x], pos[:y], text_width * 2, pos[:height], c)
  107.     pos[:x] += text_width
  108.   end
  109.   #--------------------------------------------------------------------------
  110.   # ● 刷新
  111.   #--------------------------------------------------------------------------
  112.   def refresh
  113.     contents.clear
  114.     draw_text_ex(4, 0, @text)
  115.   end
  116. end

  118. #==============================================================================
  119. # ■ Window_MenuCommand
  120. #==============================================================================
  121. class Window_MenuCommand < Window_Command
  122.   #--------------------------------------------------------------------------
  123.   # ● 初始化指令选择位置（类方法）
  124.   #--------------------------------------------------------------------------
  125.   def self.init_command_position(type = nil)
  126.     @@last_command_symbol = type
  127.   end
  128.   #--------------------------------------------------------------------------
  129.   # ● 初始化对象
  130.   #--------------------------------------------------------------------------
  131.   def initialize(sub = false)
  132.     @sub = sub
  133.     super(-24, EASY_MENU_SET::COMMAND[1])
  134.     self.opacity = 0
  135.     self.active = false
  136.     @show = false
  137.     @move_rx = @sub_ry = 0
  138.     @last_index = @index
  139.     update_placement unless @sub
  140.     select_last
  141.     refresh
  142.   end
  143.   #--------------------------------------------------------------------------
  144.   # ● 获取标准的边距尺寸
  145.   #--------------------------------------------------------------------------
  146.   def standard_padding
  147.     return 0
  148.   end
  149.   #--------------------------------------------------------------------------
  150.   # ● 显示动画前的设定
  151.   #--------------------------------------------------------------------------
  152.   def update_placement
  153.     self.x = -24 - window_width
  154.     self.contents_opacity = 0
  155.   end
  156.   #--------------------------------------------------------------------------
  157.   # ● 获取窗口的宽度
  158.   #--------------------------------------------------------------------------
  159.   def window_width
  160.     return EASY_MENU_SET::COMMAND[2] + 24 + 24
  161.   end
  162.   #--------------------------------------------------------------------------
  163.   # ● 获取项目的宽度
  164.   #--------------------------------------------------------------------------
  165.   def item_width
  166.     width - 24
  167.   end
  168.   #--------------------------------------------------------------------------
  169.   # ● 获取间隔距离
  170.   #--------------------------------------------------------------------------
  171.   def line_spacing
  172.     return EASY_MENU_SET::COMMAND[4]
  173.   end
  174.   #--------------------------------------------------------------------------
  175.   # ● 获取行高
  176.   #--------------------------------------------------------------------------
  177.   def line_height
  178.     return EASY_MENU_SET::COMMAND[3] + line_spacing
  179.   end
  180.   #--------------------------------------------------------------------------
  181.   # ● 获取指令名称
  182.   #--------------------------------------------------------------------------
  183.   def set_command_name(v)
  184.     @name = []
  185.     for i in 0...EASY_MENU_SET::BUTTON.size
  186.       name = Vocab::item     if v[i][4] == :item
  187.       name = Vocab::key_item if v[i][4] == :key_item
  188.       name = Vocab::save     if v[i][4] == :save
  189.       name = Vocab::continue if v[i][4] == :continue
  190.       name = Vocab::game_end if v[i][4] == :game_end
  191.       @name[i] = v[i][1] ? v[i][1] : name
  192.     end
  193.   end
  194.   #--------------------------------------------------------------------------
  195.   # ● 获取显示状态
  196.   #--------------------------------------------------------------------------
  197.   def set_command_enabled(v)
  198.     @enabled = []
  199.     for i in 0...EASY_MENU_SET::BUTTON.size
  200.       enabled = main_commands_enabled         if v[i][4] == :item
  201.       enabled = main_commands_enabled         if v[i][4] == :key_item
  202.       enabled = save_enabled                  if v[i][4] == :save
  203.       enabled = DataManager.save_file_exists? if v[i][4] == :continue
  204.       enabled = true                          if v[i][4] == :game_end
  205.       @enabled[i] = enabled
  206.     end
  207.   end
  208.   #--------------------------------------------------------------------------
  209.   # ● 获取指令图标
  210.   #--------------------------------------------------------------------------
  211.   def set_command_icon(v)
  212.     @icon = []
  213.     for i in 0...EASY_MENU_SET::BUTTON.size
  214.       @icon[i] = v[i][2] if v[i][2]
  215.     end
  216.   end
  217.   #--------------------------------------------------------------------------
  218.   # ● 获取选项的图标
  219.   #--------------------------------------------------------------------------
  220.   def command_icon(index)
  221.     @list[index][:ext]
  222.   end
  223.   #--------------------------------------------------------------------------
  224.   # ● 生成指令列表
  225.   #--------------------------------------------------------------------------
  226.   def make_command_list
  227.     v = EASY_MENU_SET::BUTTON
  228.     set_command_name(v)
  229.     set_command_icon(v)
  230.     set_command_enabled(v)
  231.     for i in 0...EASY_MENU_SET::BUTTON.size
  232.       add_command(@name[i], v[i][4], @enabled[i], @icon[i]) if v[i][0] or @sub
  233.     end
  234.   end
  235.   #--------------------------------------------------------------------------
  236.   # ● 刷新
  237.   #--------------------------------------------------------------------------
  238.   def refresh
  239.     #clear_command_list
  240.     #make_command_list
  241.     create_contents
  242.     contents.clear
  243.     draw_all_items
  244.   end
  245.   #--------------------------------------------------------------------------
  246.   # ● 绘制项目
  247.   #--------------------------------------------------------------------------
  248.   def draw_item(index)
  249.     return if @sub && @index != index
  250.     easy_menu_font
  251.     rect = item_rect_for_text(index)
  252.     t_size = text_size(command_name(index))
  253.     mx = @index == index ? @sub ? 0 : @move_rx : 0
  254.     my = @sub ? @sub_ry : 0
  255.     ix = item_width - t_size.width - 28 + mx
  256.     iy = (line_height - t_size.height) / 2 + my
  257.     draw_background(index, rect, mx, my)
  258.     rect.x -= 24
  259.     rect.y -= (line_spacing / 2)
  260.     enabled = command_enabled?(index)
  261.     change_color(item_color(index), enabled)
  262.     rt = [rect.x + mx, rect.y + my, rect.width, rect.height]
  263.     draw_text(rt[0], rt[1], rt[2], rt[3], command_name(index), 2)
  264.     draw_icon(command_icon(index), rect.x + ix, rect.y + iy, enabled)
  265.   end
  266.   #--------------------------------------------------------------------------
  267.   # ● 绘制底纹
  268.   #--------------------------------------------------------------------------
  269.   def draw_background(index, rect, x, y)
  270.     lh = line_height - line_spacing
  271.     bit = Cache.system(EASY_MENU_SET::COMMAND[0])
  272.     rx = bit.width - item_width
  273.     rect1 = Rect.new(rx, 0, item_width, 12)
  274.     rect2 = Rect.new(rx, 12, item_width, 12)
  275.     rect3 = Rect.new(rx, 36 - 12, item_width, 12)
  276.     d_rect = Rect.new(rect.x + x, rect.y + 12 + y, item_width, lh - 24)
  277.     self.contents.blt(rect.x + x, rect.y + y, bit, rect1)
  278.     self.contents.stretch_blt(d_rect, bit, rect2)
  279.     self.contents.blt(rect.x + x, rect.y + lh - 12 + y, bit, rect3)
  280.   end
  281.   #--------------------------------------------------------------------------
  282.   # ● 字体颜色扩展
  283.   #--------------------------------------------------------------------------
  284.   def item_color(index)
  285.     co = EASY_MENU_SET::BUTTON[index][3]
  286.     return Color.new(co[0], co[1], co[2]) if @index == index
  287.     return Color.new(co[0], co[1], co[2], 200)
  288.   end
  289.   #--------------------------------------------------------------------------
  290.   # ● 获取项目的绘制矩形
  291.   #--------------------------------------------------------------------------
  292.   def item_rect(index)
  293.     index = 0 if @sub
  294.     rect = Rect.new
  295.     rect.width = 4
  296.     rect.height = 24
  297.     rect.x = index % col_max * (item_width + spacing) + 32
  298.     rect.y = index / col_max * item_height + 4
  299.     rect
  300.   end
  301.   #--------------------------------------------------------------------------
  302.   # ● 获取项目的绘制矩形（内容用）
  303.   #--------------------------------------------------------------------------
  304.   def item_rect_for_text(index)
  305.     index = 0 if @sub
  306.     rect = Rect.new
  307.     rect.width = item_width
  308.     rect.height = item_height
  309.     rect.x = index % col_max * (item_width + spacing)
  310.     rect.y = index / col_max * item_height
  311.     rect
  312.   end
  313.   #--------------------------------------------------------------------------
  314.   # ● 展开动画的标志
  315.   #--------------------------------------------------------------------------
  316.   def show=(show)
  317.     if @show != show
  318.       @show = show
  319.     end
  320.   end
  321.   #--------------------------------------------------------------------------
  322.   # ● 获取动画的标志
  323.   #--------------------------------------------------------------------------
  324.   def show
  325.     return @show
  326.   end
  327.   #--------------------------------------------------------------------------
  328.   # ● 更新画面
  329.   #--------------------------------------------------------------------------
  330.   def update
  331.     super
  332.     if @last_index != @index && !@show
  333.       @move_rx = 0
  334.       @last_index = @index
  335.     end
  336.     update_button if Input.dir4 > 0 or @move_rx < 24
  337.   end
  338.   #--------------------------------------------------------------------------
  339.   # ● 按钮的改变动画
  340.   #--------------------------------------------------------------------------
  341.   def update_button
  342.     @move_rx += 4 if @move_rx < 24
  343.     refresh
  344.   end
  345.   #--------------------------------------------------------------------------
  346.   # ● 按钮的还原动画
  347.   #--------------------------------------------------------------------------
  348.   def hide_button
  349.     @move_rx -= 4 if @move_rx > 0
  350.     refresh
  351.   end
  352.   #--------------------------------------------------------------------------
  353.   # ● 展开动画
  354.   #--------------------------------------------------------------------------
  355.   def open_button_window
  356.     self.x += (window_width + 24) / EASY_MENU_SET::TIME
  357.     self.contents_opacity += 255 / EASY_MENU_SET::TIME
  358.     refresh
  359.     @show = false if self.x >= -24
  360.     self.x = -24 if !@show
  361.     self.contents_opacity = 255 if !@show
  362.   end
  363.   #--------------------------------------------------------------------------
  364.   # ● 关闭动画
  365.   #--------------------------------------------------------------------------
  366.   def close_button_window
  367.     @show = false if self.contents_opacity <= 0
  368.     if @move_rx > 0
  369.       hide_button
  370.     else
  371.       self.x -= (window_width + 24) / EASY_MENU_SET::TIME
  372.       self.contents_opacity -= 255 / EASY_MENU_SET::TIME
  373.       refresh
  374.     end
  375.   end
  376.   #--------------------------------------------------------------------------
  377.   # ● 进入子菜单的关闭动画
  378.   #--------------------------------------------------------------------------
  379.   def close_window_to_sub
  380.     if @move_rx > 0
  381.       hide_button
  382.       @sub_ry = @index / col_max * item_height
  383.     else
  384.       cursor_rect.empty
  385.       @show = false if @sub_ry <= 0
  386.       @sub_ry = 0 if !@show
  387.       @sub = true
  388.       @sub_ry = [(@sub_ry - ((EASY_MENU_SET::COMMAND[3] * index)) / 6), 0].max
  389.       refresh
  390.     end
  391.   end
  392. end

  394. #==============================================================================
  395. # ■ Scene_MenuBase
  396. #==============================================================================
  397. class Scene_MenuBase < Scene_Base
  398.   #--------------------------------------------------------------------------
  399.   # ● 结束处理
  400.   #--------------------------------------------------------------------------
  401.   alias easy_menu_terminate terminate
  402.   def terminate
  403.     easy_menu_terminate
  404.     dispose_rim
  405.     dispose_actor_cg
  406.     dispose_sub_button
  407.   end
  408.   #--------------------------------------------------------------------------
  409.   # ● 生成背景
  410.   #--------------------------------------------------------------------------
  411.   def create_background
  412.     wall = EASY_MENU_SET::WALLPAPER
  413.     co = EASY_MENU_SET::BACKGROUND
  414.     @background_sprite = Sprite.new
  415.     bitmap = wall ? Cache.system(wall) : SceneManager.background_bitmap
  416.     @background_sprite.bitmap = bitmap
  417.     @background_sprite.color.set(co[0], co[1], co[2], co[3]) unless wall
  418.   end
  419.   #--------------------------------------------------------------------------
  420.   # ● 绘制次背景图片
  421.   #--------------------------------------------------------------------------
  422.   def create_rim_background(bitmap, x, y)
  423.     @rim_sprite = Sprite.new
  424.     @rim_sprite.bitmap = Cache.system(bitmap) if bitmap
  425.     @rim_sprite.x = x; @rim_sprite.y = y
  426.     @rim_sprite.z = @background_sprite.z
  427.   end
  428.   #--------------------------------------------------------------------------
  429.   # ● 释放次背景图片
  430.   #--------------------------------------------------------------------------
  431.   def dispose_rim
  432.     return if !@rim_sprite
  433.     @rim_sprite.bitmap.dispose
  434.     @rim_sprite.dispose
  435.   end
  436.   #--------------------------------------------------------------------------
  437.   # ● 生成立绘精灵
  438.   #--------------------------------------------------------------------------
  439.   def create_actor_cg
  440.     v = EASY_MENU_SET::CG
  441.     return unless v[0]
  442.     @actor_cg = Sprite.new
  443.     @actor_cg.bitmap = Cache.system(v[0])
  444.     @actor_cg.x = v[1] + 2 * 7
  445.     @actor_cg.y = v[2]
  446.   end
  447.   #--------------------------------------------------------------------------
  448.   # ● 立绘的坐标判断
  449.   #--------------------------------------------------------------------------
  450.   def cg_x
  451.     v = EASY_MENU_SET::CG
  452.     return v[3] if v[4] == :l
  453.     return -(v[3]) if v[4] == :r
  454.     return 0
  455.   end
  456.   #--------------------------------------------------------------------------
  457.   # ● 释放立绘精灵
  458.   #--------------------------------------------------------------------------
  459.   def dispose_actor_cg
  460.     return if !@actor_cg
  461.     @actor_cg.bitmap.dispose
  462.     @actor_cg.dispose
  463.   end
  464.   #--------------------------------------------------------------------------
  465.   # ● 展开动画的预设坐标
  466.   #--------------------------------------------------------------------------
  467.   def set_menu_xy
  468.     v = EASY_MENU_SET::CG
  469.     xx = 0
  470.     xx = -(EASY_MENU_SET::TIME * v[3]) if v[4] == :l
  471.     xx = EASY_MENU_SET::TIME * v[3] if v[4] == :r
  472.     @actor_cg.x = v[1] + xx
  473.     @actor_cg.opacity = 0
  474.     @rim_sprite.opacity = 0 if @rim_sprite
  475.   end
  476.   #--------------------------------------------------------------------------
  477.   # ● 重绘内用小标题
  478.   #--------------------------------------------------------------------------
  479.   def create_sub_button
  480.     @sub_window = Window_MenuCommand.new(true)
  481.     @sub_window.z = 300
  482.   end
  483.   #--------------------------------------------------------------------------
  484.   # ● 释放内用小标题
  485.   #--------------------------------------------------------------------------
  486.   def dispose_sub_button
  487.     @sub_window.dispose if @sub_window
  488.   end
  489. end

  491. #==============================================================================
  492. # ■ Scene_Menu
  493. #==============================================================================
  494. class Scene_Menu < Scene_MenuBase
  495.   #--------------------------------------------------------------------------
  496.   # ● 开始处理
  497.   #--------------------------------------------------------------------------
  498.   def start
  499.     super
  500.     v = EASY_MENU_SET::MENU_RIM
  501.     create_rim_background(v[0], v[1], v[2]) if v[0]
  502.     create_actor_cg
  503.     create_command_window
  504.     set_menu_xy
  505.     @sub_show = false
  506.   end
  507.   #--------------------------------------------------------------------------
  508.   # ● 开始后处理
  509.   #--------------------------------------------------------------------------
  510.   def post_start
  511.     super
  512.     @command_window.show = true
  513.     begin
  514.       @actor_cg.x += cg_x
  515.       @actor_cg.opacity += (255 / EASY_MENU_SET::TIME)
  516.       @rim_sprite.opacity += (255 / EASY_MENU_SET::TIME) if @rim_sprite
  517.       @command_window.open_button_window
  518.       Graphics.update
  519.     end until @command_window.show == false
  520.     @command_window.activate
  521.     @actor_cg.opacity = 255
  522.   end
  523.   #--------------------------------------------------------------------------
  524.   # ● 结束前处理
  525.   #--------------------------------------------------------------------------
  526.   def pre_terminate
  527.     super
  528.     t = 0
  529.     @command_window.show = true
  530.     begin
  531.       if @sub_show
  532.         t += 1 if t <= 6
  533.         @actor_cg.x += 2 if t <= 6
  534.         @command_window.close_window_to_sub
  535.       else
  536.         @actor_cg.x += -(cg_x)
  537.         @actor_cg.opacity -= 255 / EASY_MENU_SET::TIME
  538.         @rim_sprite.opacity -= 255 / EASY_MENU_SET::TIME if @rim_sprite
  539.         @command_window.close_button_window
  540.       end
  541.       Graphics.update
  542.     end until @command_window.show == false
  543.   end
  544.   #--------------------------------------------------------------------------
  545.   # ● 生成指令窗口
  546.   #--------------------------------------------------------------------------
  547.   def create_command_window
  548.     v = EASY_MENU_SET::BUTTON
  549.     @command_window = Window_MenuCommand.new
  550.     for i in 0...EASY_MENU_SET::BUTTON.size
  551.       type = :command_item     if v[i][4] == :item
  552.       type = :command_key_item if v[i][4] == :key_item
  553.       type = :command_save     if v[i][4] == :save
  554.       type = :command_load     if v[i][4] == :continue
  555.       type = :command_game_end if v[i][4] == :game_end
  556.       @command_window.set_handler(v[i][4], method(type)) if v[i][0]
  557.     end
  558.     @command_window.set_handler(:cancel,    method(:return_scene))
  559.   end
  560.   #--------------------------------------------------------------------------
  561.   # ● 指令“物品”
  562.   #--------------------------------------------------------------------------
  563.   def command_item
  564.     @sub_show = true
  565.     SceneManager.call(Scene_Item)
  566.     SceneManager.scene.prepare(:item)
  567.   end
  568.   #--------------------------------------------------------------------------
  569.   # ● 指令“贵重物品”
  570.   #--------------------------------------------------------------------------
  571.   def command_key_item
  572.     @sub_show = true
  573.     SceneManager.call(Scene_Item)
  574.     SceneManager.scene.prepare(:key_item)
  575.   end
  576.   #--------------------------------------------------------------------------
  577.   # ● 指令“存档”
  578.   #--------------------------------------------------------------------------
  579.   def command_save
  580.     @sub_show = true
  581.     SceneManager.call(Scene_Save)
  582.   end
  583.   #--------------------------------------------------------------------------
  584.   # ● 指令“读档”
  585.   #--------------------------------------------------------------------------
  586.   def command_load
  587.     @sub_show = true
  588.     SceneManager.call(Scene_Load)
  589.   end
  590. end



  594. #==============================================================================
  595. # ■ SceneManager
  596. #==============================================================================
  597. module SceneManager
  598.   #--------------------------------------------------------------------------
  599.   # ● 模块的实例变量
  600.   #--------------------------------------------------------------------------
  601.   @save_bitmap = nil                # 存档用截图
  602.   #--------------------------------------------------------------------------
  603.   # ● 生成背景用的场景截图
  604.   #--------------------------------------------------------------------------
  605.   def self.snapshot_for_background(bitmap_blue = true)
  606.     @background_bitmap.dispose if @background_bitmap
  607.     @background_bitmap = Graphics.snap_to_bitmap
  608.     @background_bitmap.blur if bitmap_blue
  609.   end
  610.   #--------------------------------------------------------------------------
  611.   # ● 生成存档内的截图
  612.   #--------------------------------------------------------------------------
  613.   def self.snapshot_for_save_bitmap
  614.     v = EASY_MENU_SET::FILES_DETAILS_DATA
  615.     @save_bitmap.dispose if @save_bitmap
  616.     @save_bitmap = Bitmap.new(v[0][3], v[0][4])
  617.     rect = Rect.new(0, 0, v[0][3], v[0][4])
  618.     rect.x = $game_player.screen_x - rect.width / 2
  619.     rect.y = $game_player.screen_y - rect.height / 2 - 12
  620.     bitmap = Graphics.snap_to_bitmap
  621.     @save_bitmap.blt(0, 0, bitmap, rect)
  622.     bitmap.dispose
  623.   end
  624.   #--------------------------------------------------------------------------
  625.   # ● 获取存档内的截图
  626.   #--------------------------------------------------------------------------
  627.   def self.saves_bitmap
  628.     @save_bitmap
  629.   end
  630. end

  632. #==============================================================================
  633. # ■ Scene_Map
  634. #==============================================================================
  635. class Scene_Map < Scene_Base
  636.   #--------------------------------------------------------------------------
  637.   # ● 结束处理
  638.   #--------------------------------------------------------------------------
  639.   def terminate
  640.     super
  641.     type = EASY_MENU_SET::BACKGROUND[4]
  642.     type = true if SceneManager.scene_is?(Scene_Battle)
  643.     SceneManager.snapshot_for_background(type)
  644.     SceneManager.snapshot_for_save_bitmap
  645.     dispose_spriteset
  646.     perform_battle_transition if SceneManager.scene_is?(Scene_Battle)
  647.   end
  648. end


  651. #==============================================================================
  652. # ★ 物品界面
  653. #==============================================================================
  654. #==============================================================================
  655. # ■ Window_ItemList
  656. #==============================================================================
  657. class Window_ItemList < Window_Selectable
  658.   #--------------------------------------------------------------------------
  659.   # ● 初始化对象
  660.   #--------------------------------------------------------------------------
  661.   def initialize(x, y, width, height)
  662.     super
  663.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  664.     self.opacity = EASY_MENU_SET::ITEMLIST[2]
  665.     @category = :none
  666.     @data = []
  667.   end
  668.   #--------------------------------------------------------------------------
  669.   # ● 获取标准的边距尺寸
  670.   #--------------------------------------------------------------------------
  671.   def standard_padding
  672.     return 16
  673.   end
  674.   #--------------------------------------------------------------------------
  675.   # ● 获取列数
  676.   #--------------------------------------------------------------------------
  677.   def col_max
  678.     return 1
  679.   end
  680.   #--------------------------------------------------------------------------
  681.   # ● 绘制项目
  682.   #--------------------------------------------------------------------------
  683.   alias easy_menu_draw_item draw_item
  684.   def draw_item(index)
  685.     easy_menu_font
  686.     easy_menu_draw_item(index)
  687.   end
  688.   #--------------------------------------------------------------------------
  689.   # ● 绘制物品个数
  690.   #--------------------------------------------------------------------------
  691.   def draw_item_number(rect, item)
  692.     return if $game_party.item_number(item) <= 1
  693.     draw_text(rect, sprintf("%02d", $game_party.item_number(item)), 2)
  694.   end
  695.   #--------------------------------------------------------------------------
  696.   # ● 绘制物品名称
  697.   #     enabled : 有效的标志。false 的时候使用半透明效果绘制
  698.   #--------------------------------------------------------------------------
  699.   def draw_item_name(item, x, y, enabled = true, width = 172)
  700.     return unless item
  701.     draw_icon(item.icon_index, x, y, enabled)
  702.     change_color(normal_color, enabled)
  703.     draw_text_ex(x + 24, y, item.name)
  704.     #draw_text(x + 24, y, width, line_height, item.name)
  705.   end
  706.   #--------------------------------------------------------------------------
  707.   # ● 重置字体设置
  708.   #--------------------------------------------------------------------------
  709.   def reset_font_settings
  710.     change_color(normal_color)
  711.     easy_menu_font
  712.   end
  713.   #--------------------------------------------------------------------------
  714.   # ● 更新帮助内容
  715.   #--------------------------------------------------------------------------
  716.   def update_help
  717.     @help_window.set_item(item)
  718.     @big_icon.set_item(item.big_icon) if EASY_MENU_SET::BIGICON[0]
  719.   end
  720.   #--------------------------------------------------------------------------
  721.   # ● 设置物品窗口
  722.   #--------------------------------------------------------------------------
  723.   def big_icon=(big_icon)
  724.     @big_icon = big_icon
  725.     update
  726.   end
  727. end

  729. #==============================================================================
  730. # ■ BIG ICON
  731. #==============================================================================
  732. module Cache
  733.   def self.bigicon(filename)
  734.     load_bitmap(EASY_MENU_SET::BIGICON_Cache, filename)
  735.   end
  736. end

  738. #==============================================================================
  739. # ■ RPG::BaseItem
  740. #==============================================================================
  741. class RPG::BaseItem
  742.   #--------------------------------------------------------------------------
  743.   # ● 获取大图标
  744.   #--------------------------------------------------------------------------
  745.   def big_icon
  746.     self.note =~ /\<BigIcon (\w+)\>/i
  747.     $1.nil? ? "" : $1
  748.   end
  749. end

  751. #==============================================================================
  752. # ■ Window_Big_icon
  753. #==============================================================================
  754. class Window_Big_icon < Window_Base
  755.   #--------------------------------------------------------------------------
  756.   # ● 初始化对象
  757.   #--------------------------------------------------------------------------
  758.   def initialize(x, y, width, height)
  759.     super(x, y, width, height)
  760.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  761.     self.opacity = EASY_MENU_SET::BIGICON[6]
  762.   end
  763.   #--------------------------------------------------------------------------
  764.   # ● 设置内容
  765.   #--------------------------------------------------------------------------
  766.   def set_item(icon)
  767.     if icon != @icon
  768.       contents.clear
  769.       bitmap = Cache.bigicon(icon)
  770.       x = (contents.width - bitmap.width) / 2
  771.       y = (contents.height - bitmap.height) / 2
  772.       rect = Rect.new(0, 0, bitmap.width, bitmap.height)
  773.       contents.blt(x, y, bitmap, rect)
  774.       @icon = icon
  775.     end
  776.   end
  777. end

  779. #==============================================================================
  780. # ■ Scene_ItemBase
  781. #==============================================================================
  782. class Scene_ItemBase < Scene_MenuBase
  783.   #--------------------------------------------------------------------------
  784.   # ● 生成角色窗口
  785.   #--------------------------------------------------------------------------
  786.   def create_actor_window
  787.     @actor_window = Window_MenuActor.new
  788.     @actor_window.set_handler(:ok,     method(:on_actor_ok))
  789.     @actor_window.set_handler(:cancel, method(:on_actor_cancel))
  790.   end
  791.   #--------------------------------------------------------------------------
  792.   # ● 显示子窗口
  793.   #--------------------------------------------------------------------------
  794.   alias easy_menu_show_sub_window show_sub_window
  795.   def show_sub_window(window)
  796.     window.y = (Graphics.height - @actor_window.height) / 2
  797.     easy_menu_show_sub_window(window)
  798.     @actor_window.z = 200
  799.   end
  800. end

  802. #==============================================================================
  803. # ■ Scene_Item
  804. #==============================================================================
  805. class Scene_Item < Scene_ItemBase
  806.   #--------------------------------------------------------------------------
  807.   # ● 预处理
  808.   #--------------------------------------------------------------------------
  809.   def prepare(mode = :item)
  810.     @mode = mode
  811.   end
  812.   #--------------------------------------------------------------------------
  813.   # ● 开始处理
  814.   #--------------------------------------------------------------------------
  815.   def start
  816.     super
  817.     v = EASY_MENU_SET::ITEM_RIM
  818.     create_rim_background(v[0], v[1], v[2]) if v[0]
  819.     create_actor_cg unless EASY_MENU_SET::BIGICON[0]
  820.     create_help_window
  821.     create_big_icon_window if EASY_MENU_SET::BIGICON[0]
  822.     create_item_window
  823.     create_sub_button
  824.   end
  825.   #--------------------------------------------------------------------------
  826.   # ● 生成物品窗口
  827.   #--------------------------------------------------------------------------
  828.   def create_item_window
  829.     sp = EASY_MENU_SET::COMMAND[1]
  830.     iy = sp + EASY_MENU_SET::COMMAND[3] - 8
  831.     ih = Graphics.height - @help_window.height - sp - iy
  832.     @item_window = Window_ItemList.new(sp, iy, @help_window.width, ih)
  833.     @item_window.category = @mode
  834.     @item_window.viewport = @viewport
  835.     @item_window.help_window = @help_window
  836.     @item_window.big_icon = @big_icon_window if EASY_MENU_SET::BIGICON[0]
  837.     @item_window.set_handler(:ok,     method(:on_item_ok))
  838.     @item_window.set_handler(:cancel, method(:on_item_cancel))
  839.     @item_window.index = 0
  840.     @item_window.activate
  841.   end
  842.   #--------------------------------------------------------------------------
  843.   # ● 生成帮助窗口
  844.   #--------------------------------------------------------------------------
  845.   def create_help_window
  846.     sp = EASY_MENU_SET::COMMAND[1]
  847.     v = EASY_MENU_SET::ITEMLIST
  848.     w = v[0] > 0 ? v[0] : (Graphics.width / 2 - sp)
  849.     @help_window = Window_Help.new(v[1], w)
  850.     @help_window.viewport = @viewport
  851.     @help_window.x = sp
  852.     @help_window.y = Graphics.height - @help_window.height - sp
  853.   end
  854.   #--------------------------------------------------------------------------
  855.   # ● 生成物品大图标
  856.   #--------------------------------------------------------------------------
  857.   def create_big_icon_window
  858.     sp = EASY_MENU_SET::COMMAND[1]
  859.     v = EASY_MENU_SET::BIGICON
  860.     b = []
  861.     if v[1]
  862.       b[0] = @help_window.width + sp
  863.       b[1] = sp + EASY_MENU_SET::COMMAND[3] - 8
  864.       b[2] = Graphics.width - b[0] - sp
  865.       b[3] = Graphics.height - b[1] - sp
  866.     else
  867.       b = [v[2], v[3], v[4], v[5]]
  868.     end
  869.     @big_icon_window = Window_Big_icon.new(b[0], b[1], b[2], b[3])
  870.     @big_icon_window.viewport = @viewport
  871.   end
  872.   #--------------------------------------------------------------------------
  873.   # ● 物品“取消”
  874.   #--------------------------------------------------------------------------
  875.   def on_item_cancel
  876.     @item_window.unselect
  877.     return_scene
  878.   end
  879. end


  882. #==============================================================================
  883. # ★ 存档界面
  884. #==============================================================================
  885. #==============================================================================
  886. # ■ Window_SaveFileList
  887. #------------------------------------------------------------------------------
  888. # 　存档的选项窗口（左）
  889. #==============================================================================
  890. class Window_SaveFileList < Window_Selectable
  891.   #--------------------------------------------------------------------------
  892.   # ● 初始化对象
  893.   #--------------------------------------------------------------------------
  894.   def initialize(x, y, width, height)
  895.     super
  896.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  897.     self.opacity = EASY_MENU_SET::FILESLIST[4]
  898.     @symbol = nil
  899.     refresh
  900.     activate
  901.   end
  902.   #--------------------------------------------------------------------------
  903.   # ● 获取可显示的存档数目
  904.   #--------------------------------------------------------------------------
  905.   def visible_max
  906.     return EASY_MENU_SET::FILESLIST[1]
  907.   end
  908.   #--------------------------------------------------------------------------
  909.   # ● 获取项目的高度
  910.   #--------------------------------------------------------------------------
  911.   def item_height
  912.     (height - standard_padding * 2) / visible_max
  913.   end
  914.   #--------------------------------------------------------------------------
  915.   # ● 存档数量最大值
  916.   #--------------------------------------------------------------------------
  917.   def item_max
  918.     return EASY_MENU_SET::FILES_MAX
  919.   end
  920.   #--------------------------------------------------------------------------
  921.   # ● 绘制项目
  922.   #--------------------------------------------------------------------------
  923.   def draw_item(index)
  924.     header = DataManager.load_header(index)
  925.     rect = item_rect_for_text(index)
  926.     ry = (item_height - line_height) / 2
  927.     easy_menu_font
  928.     v = EASY_MENU_SET::FILESLIST
  929.     change_color(Color.new(v[3][0][0], v[3][0][1], v[3][0][2]), header)
  930.     icon_id = header ? v[2][1] : v[2][0]
  931.     draw_icon(icon_id, rect.x + 4, rect.y + ry)
  932.     text = @symbol == :save ? EASY_MENU_SET::SAVING : EASY_MENU_SET::LOADING
  933.     ing = @index == index && @symbol
  934.     name = ing ? text : (Vocab::File + " #{index + 1}")
  935.     draw_text(rect.x + 28, rect.y + ry, rect.width, line_height, name)
  936.     change_color(Color.new(v[3][1][0], v[3][1][1], v[3][1][2]), header)
  937.     draw_playtime(header, rect.x - 4, rect.y + ry, rect.width, 2)
  938.   end
  939.   #--------------------------------------------------------------------------
  940.   # ● 绘制游戏时间
  941.   #--------------------------------------------------------------------------
  942.   def draw_playtime(header, x, y, width, align)
  943.     text = header ? header[:playtime_s] : "—:—:—"
  944.     draw_text(x, y, width, line_height, text, 2)
  945.   end
  946.   #--------------------------------------------------------------------------
  947.   # ● 设置选择状态
  948.   #--------------------------------------------------------------------------
  949.   def set_files(symbol)
  950.     @symbol = symbol
  951.     refresh
  952.   end
  953. end


  956. #==============================================================================
  957. # ■ Window_FilesDetails
  958. #------------------------------------------------------------------------------
  959. # 　存档的详细窗口（右）
  960. #==============================================================================
  961. class Window_FilesDetails < Window_Base
  962.   #--------------------------------------------------------------------------
  963.   # ● 初始化对象
  964.   #--------------------------------------------------------------------------
  965.   def initialize(x, y, width, height)
  966.     super(x, y, width, height)
  967.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  968.     self.opacity = EASY_MENU_SET::FILES_DETAILS[6]
  969.     @bitmaps = []
  970.     @header = []
  971.   end
  972.   #--------------------------------------------------------------------------
  973.   # ● 释放
  974.   #--------------------------------------------------------------------------
  975.   def dispose
  976.     for bitmap in @bitmaps
  977.       next if bitmap == nil or bitmap.disposed?
  978.       bitmap.dispose
  979.     end
  980.     super
  981.   end
  982.   #--------------------------------------------------------------------------
  983.   # ● 设置选择状态
  984.   #--------------------------------------------------------------------------
  985.   def set_select(select)
  986.     return if @select == select
  987.     @select = select
  988.     refresh(@select)
  989.   end
  990.   #--------------------------------------------------------------------------
  991.   # ● 读取文件
  992.   #--------------------------------------------------------------------------
  993.   def read_save_data(index)
  994.     @header[index] = DataManager.load_header(index)
  995.     @bitmaps[index].dispose if @bitmaps[index]
  996.     return unless EASY_MENU_SET::FILES_DETAILS_DATA[0][0]
  997.     @bitmaps[index] = DataManager.load_save_bitmap(index)
  998.   end
  999.   #--------------------------------------------------------------------------
  1000.   # ● 刷新
  1001.   #--------------------------------------------------------------------------
  1002.   def refresh(index)
  1003.     contents.clear
  1004.     read_save_data(index)
  1005.     v = EASY_MENU_SET::FILES_DETAILS_DATA
  1006.     draw_background(@header[index], v)
  1007.     return unless @header[index]
  1008.     draw_save_bitmap(@header[index], index, v)
  1009.     draw_party_characters(@header[index], index, v)
  1010.     draw_party_faces(@header[index], index, v)
  1011.   end
  1012.   #--------------------------------------------------------------------------
  1013.   # ● 绘制 底图
  1014.   #--------------------------------------------------------------------------
  1015.   def draw_background(header, v)
  1016.     return unless v[3][0]
  1017.     return if (!header && v[3][1] == false)
  1018.     bitmap = Cache.system(v[3][2])
  1019.     contents.blt(v[3][3], v[3][4], bitmap, Rect.new(0, 0, v[3][5], v[3][6]))
  1020.   end
  1021.   #--------------------------------------------------------------------------
  1022.   # ● 绘制截图
  1023.   #--------------------------------------------------------------------------
  1024.   def draw_save_bitmap(header, index, v)
  1025.     return unless v[0][0]
  1026.     bitmap = @bitmaps[index]
  1027.     #bx = (width - standard_padding * 2 - bitmap.width) / 2
  1028.     contents.blt(v[0][1], v[0][2], bitmap, bitmap.rect)
  1029.   end
  1030.   #--------------------------------------------------------------------------
  1031.   # ● 绘制队伍角色行走图
  1032.   #--------------------------------------------------------------------------
  1033.   def draw_party_characters(header, index, v)
  1034.     return unless v[1][0]
  1035.     x = v[1][1]
  1036.     y = v[1][2]
  1037.     header[:characters].each_with_index do |data, i|
  1038.       draw_character(data[0], data[1], x + i * 48, y)
  1039.     end
  1040.   end
  1041.   #--------------------------------------------------------------------------
  1042.   # ● 绘制队伍角色脸谱
  1043.   #--------------------------------------------------------------------------
  1044.   def draw_party_faces(header, index, v)
  1045.     return unless v[2][0]
  1046.     x = v[2][1]
  1047.     y = v[2][2]
  1048.     header[:characters].each_with_index do |data, i|
  1049.       bit = Cache.face(data[2])
  1050.       rx = bit.width / 4
  1051.       draw_face(data[2], data[3], x + i * rx, y)
  1052.     end
  1053.   end
  1054.   #--------------------------------------------------------------------------
  1055.   # ● 绘制角色肖像图
  1056.   #     enabled : 有效的标志。false 的时候使用半透明效果绘制
  1057.   #--------------------------------------------------------------------------
  1058.   def draw_face(face_name, face_index, x, y, enabled = true)
  1059.     bitmap = Cache.face(face_name)
  1060.     w = bitmap.width / 4
  1061.     h = bitmap.height / 2
  1062.     rect = Rect.new(face_index % 4 * w, face_index / 4 * h, w, h)
  1063.     contents.blt(x + 4, y, bitmap, rect, enabled ? 255 : translucent_alpha)
  1064.     bitmap.dispose
  1065.   end
  1066. end

  1068. #==============================================================================
  1069. # ■ Scene_File
  1070. #==============================================================================
  1071. class Scene_File < Scene_MenuBase
  1072.   #--------------------------------------------------------------------------
  1073.   # ● 开始处理
  1074.   #--------------------------------------------------------------------------
  1075.   def start
  1076.     super
  1077.     v = EASY_MENU_SET::FILES_RIM
  1078.     create_rim_background(v[0], v[1], v[2]) if v[0]
  1079.     create_actor_cg unless EASY_MENU_SET::FILES_DETAILS[0]
  1080.     create_help_window if EASY_MENU_SET::FILESLIST[5]
  1081.     create_savefile_windows
  1082.     create_details_window if EASY_MENU_SET::FILES_DETAILS[0]
  1083.     create_sub_button
  1084.     init_selection
  1085.   end
  1086.   #--------------------------------------------------------------------------
  1087.   # ● 结束处理
  1088.   #--------------------------------------------------------------------------
  1089.   def terminate
  1090.     super
  1091.   end
  1092.   #--------------------------------------------------------------------------
  1093.   # ● 更新画面
  1094.   #--------------------------------------------------------------------------
  1095.   def update
  1096.     super
  1097.     @details_window.set_select(@savefile_window.index) if @details_window
  1098.   end
  1099.   #--------------------------------------------------------------------------
  1100.   # ● 生成帮助窗口
  1101.   #--------------------------------------------------------------------------
  1102.   def create_help_window
  1103.     sp = EASY_MENU_SET::COMMAND[1]
  1104.     v = EASY_MENU_SET::FILESLIST
  1105.     w = v[0] > 0 ? v[0] : (Graphics.width / 2 - sp)
  1106.     @help_window = Window_Help.new(1, w)
  1107.     @help_window.set_text(help_window_text)
  1108.     @help_window.x = sp
  1109.     @help_window.y = sp + EASY_MENU_SET::COMMAND[3] - 8
  1110.   end
  1111.   #--------------------------------------------------------------------------
  1112.   # ● 获取帮助窗口的文本
  1113.   #--------------------------------------------------------------------------
  1114.   def help_window_text
  1115.     return ""
  1116.   end
  1117.   #--------------------------------------------------------------------------
  1118.   # ● 生成存档文件窗口
  1119.   #--------------------------------------------------------------------------
  1120.   def create_savefile_windows
  1121.     sp = EASY_MENU_SET::COMMAND[1]
  1122.     hy = sp + EASY_MENU_SET::COMMAND[3] - 8
  1123.     sy = @help_window ? (@help_window.y + @help_window.height) : hy
  1124.     v = EASY_MENU_SET::FILESLIST
  1125.     sw = v[0] > 0 ? v[0] : (Graphics.width / 2 - sp)
  1126.     sh = Graphics.height - sy - sp
  1127.     @savefile_window = Window_SaveFileList.new(sp, sy, sw, sh)
  1128.     @savefile_window.set_handler(:ok,     method(:on_savefile_ok))
  1129.     @savefile_window.set_handler(:cancel, method(:on_savefile_cancel))
  1130.   end
  1131.   #--------------------------------------------------------------------------
  1132.   # ● 生成详细文件窗口
  1133.   #--------------------------------------------------------------------------
  1134.   def create_details_window
  1135.     sp = EASY_MENU_SET::COMMAND[1]
  1136.     v = EASY_MENU_SET::FILES_DETAILS
  1137.     d = []
  1138.     if v[1]
  1139.       d[0] = @savefile_window.width + sp
  1140.       d[1] = @help_window.y
  1141.       d[2] = Graphics.width - d[0] - sp
  1142.       d[3] = Graphics.height - d[1] - sp
  1143.     else
  1144.       d = [v[2], v[3], v[4], v[5]]
  1145.     end
  1146.     @details_window = Window_FilesDetails.new(d[0], d[1], d[2], d[3])
  1147.   end
  1148.   #--------------------------------------------------------------------------
  1149.   # ● 初始化选择状态
  1150.   #--------------------------------------------------------------------------
  1151.   def init_selection
  1152.     index = first_savefile_index
  1153.     @savefile_window.select(index)
  1154.     @details_window.set_select(index) if @details_window
  1155.   end
  1156. end


  1159. #==============================================================================
  1160. # ■ Scene_Save
  1161. #==============================================================================
  1162. class Scene_Save < Scene_File
  1163.   #--------------------------------------------------------------------------
  1164.   # ● 开始处理
  1165.   #--------------------------------------------------------------------------
  1166.   def start
  1167.     Window_MenuCommand::init_command_position(:save)
  1168.     super
  1169.   end
  1170.   #--------------------------------------------------------------------------
  1171.   # ● 确定存档文件
  1172.   #--------------------------------------------------------------------------
  1173.   def on_savefile_ok
  1174.     super
  1175.     if DataManager.save_game(@savefile_window.index)
  1176.       on_save_success
  1177.     else
  1178.       Sound.play_buzzer
  1179.     end
  1180.   end
  1181.   #--------------------------------------------------------------------------
  1182.   # ● 存档成功时的处理
  1183.   #--------------------------------------------------------------------------
  1184.   def on_save_success
  1185.     Sound.play_save
  1186.     @savefile_window.set_files(:save)
  1187.     @details_window.refresh(@savefile_window.index) if @details_window
  1188.     Graphics.wait(30)
  1189.     if EASY_MENU_SET::FILES_RETURN
  1190.       return_scene
  1191.     else
  1192.       @savefile_window.set_files(nil)
  1193.       @savefile_window.activate
  1194.     end
  1195.   end
  1196. end


  1199. #==============================================================================
  1200. # ■ Scene_Load
  1201. #==============================================================================
  1202. class Scene_Load < Scene_File
  1203.   #--------------------------------------------------------------------------
  1204.   # ● 开始处理
  1205.   #--------------------------------------------------------------------------
  1206.   def start
  1207.     Window_MenuCommand::init_command_position(:continue)
  1208.     super
  1209.   end
  1210.   #--------------------------------------------------------------------------
  1211.   # ● 确定读档文件
  1212.   #--------------------------------------------------------------------------
  1213.   def on_savefile_ok
  1214.     super
  1215.     if DataManager.load_game(@savefile_window.index)
  1216.       on_load_success
  1217.     else
  1218.       Sound.play_buzzer
  1219.     end
  1220.   end
  1221.   #--------------------------------------------------------------------------
  1222.   # ● 读档成功时的处理
  1223.   #--------------------------------------------------------------------------
  1224.   def on_load_success
  1225.     Sound.play_load
  1226.     @savefile_window.set_files(:continue)
  1227.     Graphics.wait(20)
  1228.     fadeout_all
  1229.     $game_system.on_after_load
  1230.     SceneManager.goto(Scene_Map)
  1231.   end
  1232. end


  1235. #==============================================================================
  1236. # ■ DataManager
  1237. #==============================================================================
  1238. module DataManager
  1239.   #--------------------------------------------------------------------------
  1240.   # ● 判定存档文件是否存在
  1241.   #--------------------------------------------------------------------------
  1242.   def self.save_file_exists?
  1243.     if savefile_folder == ""
  1244.       text = 'Save*.rvdata2'
  1245.     else
  1246.       text = savefile_folder + '/Save*.rvdata2'
  1247.     end
  1248.     !Dir.glob(text).empty?
  1249.   end
  1250.   #--------------------------------------------------------------------------
  1251.   # ● 存档文件的最大数
  1252.   #--------------------------------------------------------------------------
  1253.   def self.savefile_max
  1254.     max = EASY_MENU_SET::FILES_MAX ? EASY_MENU_SET::FILES_MAX : 16
  1255.     return max
  1256.   end
  1257.   #--------------------------------------------------------------------------
  1258.   # ● 生成父文件夹
  1259.   #--------------------------------------------------------------------------
  1260.   def self.savefile_folder
  1261.     return EASY_MENU_SET::FILES_NAME
  1262.   end
  1263.   #--------------------------------------------------------------------------
  1264.   # ● 生成文件名
  1265.   #     index : 文件索引
  1266.   #--------------------------------------------------------------------------
  1267.   def self.make_filename(index)
  1268.     filename = sprintf("Save%02d.rvdata2", index + 1)
  1269.     if savefile_folder == ""
  1270.       return filename
  1271.     else
  1272.       return savefile_folder + "/" + filename
  1273.     end
  1274.   end
  1275.   #--------------------------------------------------------------------------
  1276.   # ● 生成截图
  1277.   #--------------------------------------------------------------------------
  1278.   def self.make_save_bitmap
  1279.     bitmap = set_bitmap_array(SceneManager.saves_bitmap)
  1280.     bitmap
  1281.   end
  1282.   #--------------------------------------------------------------------------
  1283.   # ● 获取截图
  1284.   #--------------------------------------------------------------------------
  1285.   def self.load_save_bitmap(index)
  1286.     begin
  1287.       File.open(make_filename(index), "rb") do |file|
  1288.         Marshal.load(file)
  1289.         return read_bitmap_array(Marshal.load(file))
  1290.       end
  1291.     rescue
  1292.       return nil
  1293.     end
  1294.   end
  1295.   #--------------------------------------------------------------------------
  1296.   # ● 制作截图文件 by 老鹰
  1297.   #--------------------------------------------------------------------------
  1298.   def self.set_bitmap_array(bitmap)
  1299.     data = []
  1300.     bitmap.height.times do |i| # 行号
  1301.       data[i] = []
  1302.       bitmap.width.times do |j| # 列号
  1303.         color = bitmap.get_pixel(j, i)
  1304.         data[i][j] = [color.red, color.green, color.blue]
  1305.       end
  1306.     end
  1307.     data
  1308.   end
  1309.   #--------------------------------------------------------------------------
  1310.   # ● 获取截图文件 by 老鹰
  1311.   #--------------------------------------------------------------------------
  1312.   def self.read_bitmap_array(array)
  1313.     h = array.size # 行数
  1314.     w = array[0].size # 列数
  1315.     bitmap = Bitmap.new(w, h)
  1316.     h.times do |i|
  1317.       w.times do |j|
  1318.         data = array[i][j]
  1319.         color = Color.new(data[0], data[1], data[2])
  1320.         bitmap.set_pixel(j, i, color)
  1321.       end
  1322.     end
  1323.     bitmap
  1324.   end
  1325.   #--------------------------------------------------------------------------
  1326.   # ● 执行存档（没有错误处理）
  1327.   #--------------------------------------------------------------------------
  1328.   def self.save_game_without_rescue(index)
  1329.     unless FileTest.directory?(savefile_folder)
  1330.       Dir::mkdir(savefile_folder)
  1331.     end
  1332.     File.open(make_filename(index), "wb") do |file|
  1333.       $game_system.on_before_save
  1334.       Marshal.dump(make_save_header, file)
  1335.       Marshal.dump(make_save_bitmap, file)
  1336.       Marshal.dump(make_save_contents, file)
  1337.       @last_savefile_index = index
  1338.     end
  1339.     return true
  1340.   end
  1341.   #--------------------------------------------------------------------------
  1342.   # ● 执行读档（没有错误处理）
  1343.   #--------------------------------------------------------------------------
  1344.   def self.load_game_without_rescue(index)
  1345.     File.open(make_filename(index), "rb") do |file|
  1346.       Marshal.load(file)
  1347.       Marshal.load(file)
  1348.       extract_save_contents(Marshal.load(file))
  1349.       reload_map_if_updated
  1350.       @last_savefile_index = index
  1351.     end
  1352.     return true
  1353.   end
  1354. end

  1356. #==============================================================================
  1357. # ■ Game_Party
  1358. #==============================================================================
  1359. class Game_Party < Game_Unit
  1360.   #--------------------------------------------------------------------------
  1361.   # ● 存档文件显示用的角色图像信息
  1362.   #--------------------------------------------------------------------------
  1363.   def characters_for_savefile
  1364.     battle_members.collect do |actor|
  1365.       [actor.character_name, actor.character_index,
  1366.        actor.face_name, actor.face_index]
  1367.     end
  1368.   end
  1369. end


  1372. #==============================================================================
  1373. # ■ Window_MenuStatus
  1374. #==============================================================================
  1375. class Window_MenuStatus < Window_Selectable
  1376.   #--------------------------------------------------------------------------
  1377.   # ● 获取窗口的宽度
  1378.   #--------------------------------------------------------------------------
  1379.   def window_width
  1380.     Graphics.width - 160 - 96
  1381.   end
  1382.   #--------------------------------------------------------------------------
  1383.   # ● 获取窗口的高度
  1384.   #--------------------------------------------------------------------------
  1385.   def window_height
  1386.     Graphics.height > 416 ? 416 : Graphics.height
  1387.   end
  1388. end

  1390. #==============================================================================
  1391. # ■ Window_GameEnd
  1392. #==============================================================================
  1393. class Window_GameEnd < Window_Command
  1394.   #--------------------------------------------------------------------------
  1395.   # ● 初始化对象
  1396.   #--------------------------------------------------------------------------
  1397.   alias easy_menu_initialize initialize
  1398.   def initialize
  1399.     easy_menu_initialize
  1400.     self.windowskin = Cache.system(EASY_MENU_SET::SKIN)
  1401.   end
  1402. end
复制代码


大佬能教我一下吗？我这个好像不太一样，怎么弄才能让那个存档方面失效？
作者: alexncf125    时间: 2021-4-4 23:00
最初の結果 发表于 2021-4-4 22:26
我的是这样的，怎么弄？大佬，能教教我吗？

那请你去下载最新版本替换掉旧版后, 再按2L的方法注释
https://rpg.blue/thread-476318-1-1.html



欢迎光临 Project1 (https://rpg.blue/) Powered by Discuz! X3.1