Project1

标题: 请问装备扩展脚本中，如何让防具分到新加的那两类中。 [打印本页]
作者: 末画王道    时间: 2021-7-7 16:43
标题: 请问装备扩展脚本中，如何让防具分到新加的那两类中。
，加上种类的方法好像行不通
作者: 末画王道    时间: 2021-7-7 16:44
本帖最后由 末画王道 于 2021-7-7 16:47 编辑

# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#                                防具类追加
#
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
module RPG
  class Armor
    def name
      name = @name.split(/,/)[0]
      return name != nil ? name : ''
    end
    def kind
      kind  = @name.split(/,/)[1]
      return kind  != nil ? kind.to_i : @kind
    end
  end
end
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#                  Game_Actor添加新的防具ID，并对相关方法修正
#
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
class Game_Actor < Game_Battler
  attr_reader   :armor5_id                # 道具 ID
  attr_reader   :armor6_id                # 装饰品 ID
  #--------------------------------------------------------------------------
  # ● 设置
  #     actor_id : 角色 ID
  #--------------------------------------------------------------------------
  alias old_setup setup
  def setup(actor_id)
    old_setup(actor_id)
    @armor5_id = 0
    @armor6_id = 0
    update_auto_state(nil, $data_armors[@armor5_id])
    update_auto_state(nil, $data_armors[@armor6_id])
  end
  #--------------------------------------------------------------------------
  # ● 取得属性修正值
  #     element_id : 属性 ID
  #--------------------------------------------------------------------------
  def element_rate(element_id)
    # 获取对应属性有效度的数值
    table = [0,200,150,100,50,0,-100]
    result = table[$data_classes[@class_id].element_ranks[element_id]]
    # 防具能防御本属性的情况下效果减半
    for i in [@armor1_id, @armor2_id, @armor3_id, @armor4_id, @armor5_id, @armor6_id]
      armor = $data_armors
      if armor != nil and armor.guard_element_set.include?(element_id)
        result /= 2
      end
    end
    # 状态能防御本属性的情况下效果减半
    for i in @states
      if $data_states.guard_element_set.include?(element_id)
        result /= 2
      end
    end
    # 过程结束
    return result
  end
  #--------------------------------------------------------------------------
  # ● 判定防御属性
  #     state_id : 属性 ID
  #--------------------------------------------------------------------------
  def state_guard?(state_id)
    for i in [@armor1_id, @armor2_id, @armor3_id, @armor4_id, @armor5_id, @armor6_id]
      armor = $data_armors
      if armor != nil
        if armor.guard_state_set.include?(state_id)
          return true
        end
      end
    end
    return false
  end
  #--------------------------------------------------------------------------
  # ● 获取基本力量
  #--------------------------------------------------------------------------
  def base_str
    n = $data_actors[@actor_id].parameters[2, @level]
    weapon = $data_weapons[@weapon_id]
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    n += weapon != nil ? weapon.str_plus : 0
    n += armor1 != nil ? armor1.str_plus : 0
    n += armor2 != nil ? armor2.str_plus : 0
    n += armor3 != nil ? armor3.str_plus : 0
    n += armor4 != nil ? armor4.str_plus : 0
    n += armor5 != nil ? armor5.str_plus : 0
    n += armor6 != nil ? armor6.str_plus : 0
    return [[n, 1].max, 999].min
  end
  #--------------------------------------------------------------------------
  # ● 获取基本灵巧
  #--------------------------------------------------------------------------
  def base_dex
    n = $data_actors[@actor_id].parameters[3, @level]
    weapon = $data_weapons[@weapon_id]
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    n += weapon != nil ? weapon.dex_plus : 0
    n += armor1 != nil ? armor1.dex_plus : 0
    n += armor2 != nil ? armor2.dex_plus : 0
    n += armor3 != nil ? armor3.dex_plus : 0
    n += armor4 != nil ? armor4.dex_plus : 0
    n += armor5 != nil ? armor5.dex_plus : 0
    n += armor6 != nil ? armor6.dex_plus : 0
    return [[n, 1].max, 999].min
  end
  #--------------------------------------------------------------------------
  # ● 获取基本速度
  #--------------------------------------------------------------------------
  def base_agi
    n = $data_actors[@actor_id].parameters[4, @level]
    weapon = $data_weapons[@weapon_id]
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    n += weapon != nil ? weapon.agi_plus : 0
    n += armor1 != nil ? armor1.agi_plus : 0
    n += armor2 != nil ? armor2.agi_plus : 0
    n += armor3 != nil ? armor3.agi_plus : 0
    n += armor4 != nil ? armor4.agi_plus : 0
    n += armor5 != nil ? armor5.agi_plus : 0
    n += armor6 != nil ? armor6.agi_plus : 0
    return [[n, 1].max, 999].min
  end
  #--------------------------------------------------------------------------
  # ● 获取基本魔力
  #--------------------------------------------------------------------------
  def base_int
    n = $data_actors[@actor_id].parameters[5, @level]
    weapon = $data_weapons[@weapon_id]
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    n += weapon != nil ? weapon.int_plus : 0
    n += armor1 != nil ? armor1.int_plus : 0
    n += armor2 != nil ? armor2.int_plus : 0
    n += armor3 != nil ? armor3.int_plus : 0
    n += armor4 != nil ? armor4.int_plus : 0
    n += armor5 != nil ? armor5.int_plus : 0
    n += armor6 != nil ? armor6.int_plus : 0
    return [[n, 1].max, 999].min
  end
  #--------------------------------------------------------------------------
  # ● 获取基本物理防御
  #--------------------------------------------------------------------------
  def base_pdef
    weapon = $data_weapons[@weapon_id]
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    pdef1 = weapon != nil ? weapon.pdef : 0
    pdef2 = armor1 != nil ? armor1.pdef : 0
    pdef3 = armor2 != nil ? armor2.pdef : 0
    pdef4 = armor3 != nil ? armor3.pdef : 0
    pdef5 = armor4 != nil ? armor4.pdef : 0
    pdef6 = armor5 != nil ? armor5.pdef : 0
    pdef7 = armor6 != nil ? armor6.pdef : 0
    return pdef1 + pdef2 + pdef3 + pdef4 + pdef5 + pdef6 + pdef7
  end
  #--------------------------------------------------------------------------
  # ● 获取基本魔法防御
  #--------------------------------------------------------------------------
  def base_mdef
    weapon = $data_weapons[@weapon_id]
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    mdef1 = weapon != nil ? weapon.mdef : 0
    mdef2 = armor1 != nil ? armor1.mdef : 0
    mdef3 = armor2 != nil ? armor2.mdef : 0
    mdef4 = armor3 != nil ? armor3.mdef : 0
    mdef5 = armor4 != nil ? armor4.mdef : 0
    mdef6 = armor5 != nil ? armor5.mdef : 0
    mdef7 = armor6 != nil ? armor6.mdef : 0
    return mdef1 + mdef2 + mdef3 + mdef4 + mdef5 + mdef6 + mdef7
  end
  #--------------------------------------------------------------------------
  # ● 获取基本回避修正
  #--------------------------------------------------------------------------
  def base_eva
    armor1 = $data_armors[@armor1_id]
    armor2 = $data_armors[@armor2_id]
    armor3 = $data_armors[@armor3_id]
    armor4 = $data_armors[@armor4_id]
    armor5 = $data_armors[@armor5_id]
    armor6 = $data_armors[@armor6_id]
    eva1 = armor1 != nil ? armor1.eva : 0
    eva2 = armor2 != nil ? armor2.eva : 0
    eva3 = armor3 != nil ? armor3.eva : 0
    eva4 = armor4 != nil ? armor4.eva : 0
    eva5 = armor5 != nil ? armor5.eva : 0
    eva6 = armor6 != nil ? armor6.eva : 0
    return eva1 + eva2 + eva3 + eva4 + eva5 + eva6
  end
  #--------------------------------------------------------------------------
  # ● 装备固定判定
  #     equip_type : 装备类型
  #--------------------------------------------------------------------------
  def equip_fix?(equip_type)
    case equip_type
    when 0  # 武器
      return $data_actors[@actor_id].weapon_fix
    when 1  # 盾
      return $data_actors[@actor_id].armor1_fix
    when 2  # 头
      return $data_actors[@actor_id].armor2_fix
    when 3  # 身体
      return $data_actors[@actor_id].armor3_fix
    when 4  # 道具
      return $data_actors[@actor_id].armor4_fix
    end
    return false
  end
  #--------------------------------------------------------------------------
  # ● 变更装备
  #     equip_type : 装备类型
  #     id    : 武器 or 防具 ID  (0 为解除装备)
  #--------------------------------------------------------------------------
  def equip(equip_type, id)
    case equip_type
    when 0  # 武器
      if id == 0 or $game_party.weapon_number(id) > 0
        $game_party.gain_weapon(@weapon_id, 1)
        @weapon_id = id
        $game_party.lose_weapon(id, 1)
      end
    when 1  # 盾
      if id == 0 or $game_party.armor_number(id) > 0
        update_auto_state($data_armors[@armor1_id], $data_armors[id])
        $game_party.gain_armor(@armor1_id, 1)
        @armor1_id = id
        $game_party.lose_armor(id, 1)
      end
    when 2  # 头
      if id == 0 or $game_party.armor_number(id) > 0
        update_auto_state($data_armors[@armor2_id], $data_armors[id])
        $game_party.gain_armor(@armor2_id, 1)
        @armor2_id = id
        $game_party.lose_armor(id, 1)
      end
    when 3  # 身体
      if id == 0 or $game_party.armor_number(id) > 0
        update_auto_state($data_armors[@armor3_id], $data_armors[id])
        $game_party.gain_armor(@armor3_id, 1)
        @armor3_id = id
        $game_party.lose_armor(id, 1)
      end
    when 4  # 道具
      if id == 0 or $game_party.armor_number(id) > 0
        update_auto_state($data_armors[@armor4_id], $data_armors[id])
        $game_party.gain_armor(@armor4_id, 1)
        @armor4_id = id
        $game_party.lose_armor(id, 1)
      end
    when 5  # 装饰品
      if id == 0 or $game_party.armor_number(id) > 0
        update_auto_state($data_armors[@armor5_id], $data_armors[id])
        $game_party.gain_armor(@armor5_id, 1)
        @armor5_id = id
        $game_party.lose_armor(id, 1)
      end
    when 6  # 道具
      if id == 0 or $game_party.armor_number(id) > 0
        update_auto_state($data_armors[@armor6_id], $data_armors[id])
        $game_party.gain_armor(@armor6_id, 1)
        @armor6_id = id
        $game_party.lose_armor(id, 1)
      end
    end
  end
  #--------------------------------------------------------------------------
  # ● 更改职业 ID
  #     class_id : 新的职业 ID
  #--------------------------------------------------------------------------
  def class_id=(class_id)
    if $data_classes[class_id] != nil
      @class_id = class_id
      # 避开无法装备的物品
      unless equippable?($data_weapons[@weapon_id])
        equip(0, 0)
      end
      unless equippable?($data_armors[@armor1_id])
        equip(1, 0)
      end
      unless equippable?($data_armors[@armor2_id])
        equip(2, 0)
      end
      unless equippable?($data_armors[@armor3_id])
        equip(3, 0)
      end
      unless equippable?($data_armors[@armor4_id])
        equip(4, 0)
      end
      unless equippable?($data_armors[@armor5_id])
        equip(5, 0)
      end
      unless equippable?($data_armors[@armor6_id])
        equip(6, 0)
      end
    end
  end
end
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#              Window_Base美化，增加属性增减颜色，及全能力值描绘
#
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#==============================================================================
# ■ Window_Base
#------------------------------------------------------------------------------
# 　游戏中全部窗口的超级类。
#==============================================================================

class Window_Base < Window
  ################## 属性增减颜色 ##############################
  def up_color
    return Color.new(255, 0, 0)
  end
  def down_color
    return Color.new(0, 255, 0)
  end
  #--------------------------------------------------------------------------
  # ● 描绘能力值
  #     actor : 角色
  #     x     : 描画目标 X 坐标
  #     y     : 描画目标 Y 坐标
  #     type  : 能力值种类 (0～6)
  #--------------------------------------------------------------------------
  def draw_actor_parameter(actor, x, y, type)
    case type
    when 0
      parameter_name = $data_system.words.atk
      parameter_value = actor.atk
    when 1
      parameter_name = $data_system.words.pdef
      parameter_value = actor.pdef
    when 2
      parameter_name = $data_system.words.mdef
      parameter_value = actor.mdef
    when 3
      parameter_name = $data_system.words.str
      parameter_value = actor.str
    when 4
      parameter_name = $data_system.words.dex
      parameter_value = actor.dex
    when 5
      parameter_name = $data_system.words.agi
      parameter_value = actor.agi
    when 6
      parameter_name = $data_system.words.int
      parameter_value = actor.int
    when 7
      parameter_name = "回避"
      parameter_value = actor.eva
    end
    self.contents.font.color = system_color
    self.contents.draw_text(x, y, 120, 32, parameter_name)
    self.contents.font.color = normal_color
    self.contents.draw_text(x + 120, y, 36, 32, parameter_value.to_s, 2)
  end
end
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#              装备窗口美化，全能力值描绘并追加新的防具装备栏
#
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#==============================================================================
# ■ Window_EquipRight
#------------------------------------------------------------------------------
# 　装备画面、显示角色现在装备的物品的窗口。
#==============================================================================

class Window_EquipRight < Window_Selectable
  #--------------------------------------------------------------------------
  # ● 初始化对像
  #     actor : 角色
  #--------------------------------------------------------------------------
  def initialize(actor)
    super(272, 64, 368, 256)
    self.contents = Bitmap.new(width - 32, height - 32)
    @actor = actor
    refresh
    self.index = 0
  end
  #--------------------------------------------------------------------------
  # ● 刷新
  #--------------------------------------------------------------------------
  def refresh
    self.contents.clear
    @data = []
    @data.push($data_weapons[@actor.weapon_id])
    @data.push($data_armors[@actor.armor1_id])
    @data.push($data_armors[@actor.armor2_id])
    @data.push($data_armors[@actor.armor3_id])
    @data.push($data_armors[@actor.armor4_id])
    @data.push($data_armors[@actor.armor5_id])
    @data.push($data_armors[@actor.armor6_id])
    @item_max = @data.size
    self.contents.font.color = system_color
    self.contents.draw_text(4, 32 * 0, 92, 32, $data_system.words.weapon)
    self.contents.draw_text(4, 32 * 1, 92, 32, $data_system.words.armor1)
    self.contents.draw_text(4, 32 * 2, 92, 32, $data_system.words.armor2)
    self.contents.draw_text(4, 32 * 3, 92, 32, $data_system.words.armor3)
    self.contents.draw_text(4, 32 * 4, 92, 32, $data_system.words.armor4)
    self.contents.draw_text(4, 32 * 5, 92, 32, "道具")
    self.contents.draw_text(4, 32 * 6, 92, 32, "道具Ⅱ")
    draw_item_name(@data[0], 92, 32 * 0)
    draw_item_name(@data[1], 92, 32 * 1)
    draw_item_name(@data[2], 92, 32 * 2)
    draw_item_name(@data[3], 92, 32 * 3)
    draw_item_name(@data[4], 92, 32 * 4)
    draw_item_name(@data[5], 92, 32 * 5)
    draw_item_name(@data[6], 92, 32 * 6)
  end
end

#==============================================================================
# ■ Window_EquipLeft
#------------------------------------------------------------------------------
# 　装备画面的、显示角色能力值变化的窗口。
#==============================================================================

class Window_EquipLeft < Window_Base
  #--------------------------------------------------------------------------
  # ● 初始化对像
  #     actor : 角色
  #--------------------------------------------------------------------------
  def initialize(actor)
    super(0, 64, 272, 416)
    self.contents = Bitmap.new(width - 32, height - 32)
    @actor = actor
    refresh
  end
  #--------------------------------------------------------------------------
  # ● 刷新
  #--------------------------------------------------------------------------
  def refresh
    self.contents.clear
    draw_actor_name(@actor, 4, 0)
    draw_actor_level(@actor, 4, 32)

    draw_actor_parameter(@actor, 4, 64, 0)
    draw_actor_parameter(@actor, 4, 96, 1)
    draw_actor_parameter(@actor, 4, 128, 2)
    draw_actor_parameter(@actor, 4, 160, 7)
    draw_actor_parameter(@actor, 4, 192, 3)
    draw_actor_parameter(@actor, 4, 224, 4)
    draw_actor_parameter(@actor, 4, 256, 5)
    draw_actor_parameter(@actor, 4, 288, 6)
    if @new_atk != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 64, 40, 32, "→", 1)
      self.contents.font.color = @new_atk>@actor.atk ? up_color : down_color
      self.contents.font.color = normal_color if @new_atk == @actor.atk
      self.contents.draw_text(200, 64, 36, 32, @new_atk.to_s, 2)
    end
    if @new_pdef != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 96, 40, 32, "→", 1)
      self.contents.font.color = @new_pdef>@actor.pdef ? up_color : down_color
      self.contents.font.color = normal_color if @new_pdef == @actor.pdef
      self.contents.draw_text(200, 96, 36, 32, @new_pdef.to_s, 2)
    end
    if @new_mdef != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 128, 40, 32, "→", 1)
      self.contents.font.color = @new_mdef>@actor.mdef ? up_color : down_color
      self.contents.font.color = normal_color if @new_mdef == @actor.mdef
      self.contents.draw_text(200, 128, 36, 32, @new_mdef.to_s, 2)
    end
    if @new_eva != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 160, 40, 32, "→", 1)
      self.contents.font.color = @new_eva>@actor.eva ? up_color : down_color
      self.contents.font.color = normal_color if @new_eva == @actor.eva
      self.contents.draw_text(200, 160, 36, 32, @new_eva.to_s, 2)
    end
    if @new_str != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 192, 40, 32, "→", 1)
      self.contents.font.color = @new_str>@actor.str ? up_color : down_color
      self.contents.font.color = normal_color if @new_str == @actor.str
      self.contents.draw_text(200, 192, 36, 32, @new_str.to_s, 2)
    end
    if @new_dex != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 224, 40, 32, "→", 1)
      self.contents.font.color = @new_dex>@actor.dex ? up_color : down_color
      self.contents.font.color = normal_color if @new_dex == @actor.dex
      self.contents.draw_text(200, 224, 36, 32, @new_dex.to_s, 2)
    end
    if @new_agi != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 256, 40, 32, "→", 1)
      self.contents.font.color = @new_agi>@actor.agi ? up_color : down_color
      self.contents.font.color = normal_color if @new_agi == @actor.agi
      self.contents.draw_text(200, 256, 36, 32, @new_agi.to_s, 2)
    end
    if @new_int != nil
      self.contents.font.color = system_color
      self.contents.draw_text(160, 288, 40, 32, "→", 1)
      self.contents.font.color = @new_int>@actor.int ? up_color : down_color
      self.contents.font.color = normal_color if @new_int == @actor.int
      self.contents.draw_text(200, 288, 36, 32, @new_int.to_s, 2)
    end
  end
  #--------------------------------------------------------------------------
  # ● 变更装备后的能力值设置
  #     new_atk  : 变更装备后的攻击力
  #     new_pdef : 变更装备后的物理防御
  #     new_mdef : 变更装备后的魔法防御
  #--------------------------------------------------------------------------
  def set_new_parameters(new_atk, new_pdef, new_mdef, new_eva, new_str, new_dex, new_agi, new_int)
    if @new_atk != new_atk or @new_pdef !=new_pdef or @new_mdef != new_mdef or @new_eva != new_eva or @new_str != new_str or @new_dex !=new_dex or @new_agi != new_agi or @new_int != new_int
      @new_atk = new_atk
      @new_pdef = new_pdef
      @new_mdef = new_mdef
      @new_eva = new_eva
      @new_str = new_str
      @new_dex = new_dex
      @new_agi = new_agi
      @new_int = new_int
      refresh
    end
  end
end
#==============================================================================
# ■ Window_EquipItem
#------------------------------------------------------------------------------
# 　装备画面、显示浏览变更装备的候补物品的窗口。
#==============================================================================

class Window_EquipItem < Window_Selectable
  #--------------------------------------------------------------------------
  # ● 初始化对像
  #     actor      : 角色
  #     equip_type : 装备部位 (0～3)
  #--------------------------------------------------------------------------
  def initialize(actor, equip_type)
    super(272, 320, 368, 160)
    @actor = actor
    @equip_type = equip_type
    @column_max = 1
    refresh
    self.active = false
    self.index = -1
  end
  #--------------------------------------------------------------------------
  # ● 项目的描绘
  #     index : 项目符号
  #--------------------------------------------------------------------------
  def draw_item(index)
    item = @data[index]
    x = 4
    y = index * 32
    case item
    when RPG::Weapon
      number = $game_party.weapon_number(item.id)
    when RPG::Armor
      number = $game_party.armor_number(item.id)
    end
    bitmap = RPG::Cache.icon(item.icon_name)
    self.contents.blt(x, y + 4, bitmap, Rect.new(0, 0, 24, 24))
    self.contents.font.color = normal_color
    self.contents.draw_text(x + 28, y, 212, 32, item.name, 0)
    self.contents.draw_text(x + 240, y, 16, 32, ":", 1)
    self.contents.draw_text(x + 256, y, 24, 32, number.to_s, 2)
  end
end

class Scene_Equip
  #--------------------------------------------------------------------------
  # ● 主处理
  #--------------------------------------------------------------------------
  def main
    # 获取角色
    @actor = $game_party.actors[@actor_index]
    # 生成窗口
    @help_window = Window_Help.new
    @left_window = Window_EquipLeft.new(@actor)
    @right_window = Window_EquipRight.new(@actor)
    @item_window1 = Window_EquipItem.new(@actor, 0)
    @item_window2 = Window_EquipItem.new(@actor, 1)
    @item_window3 = Window_EquipItem.new(@actor, 2)
    @item_window4 = Window_EquipItem.new(@actor, 3)
    @item_window5 = Window_EquipItem.new(@actor, 4)
    @item_window6 = Window_EquipItem.new(@actor, 5)
    @item_window7 = Window_EquipItem.new(@actor, 6)
    # 关联帮助窗口
    @right_window.help_window = @help_window
    @item_window1.help_window = @help_window
    @item_window2.help_window = @help_window
    @item_window3.help_window = @help_window
    @item_window4.help_window = @help_window
    @item_window5.help_window = @help_window
    @item_window6.help_window = @help_window
    @item_window7.help_window = @help_window
    # 设置光标位置
    @right_window.index = @equip_index
    refresh
    # 执行过渡
    Graphics.transition
    # 主循环
    loop do
      # 刷新游戏画面
      Graphics.update
      # 刷新输入信息
      Input.update
      # 刷新画面
      update
      # 如果画面切换的话的就中断循环
      if $scene != self
        break
      end
    end
    # 准备过渡
    Graphics.freeze
    # 释放窗口
    @help_window.dispose
    @left_window.dispose
    @right_window.dispose
    @item_window1.dispose
    @item_window2.dispose
    @item_window3.dispose
    @item_window4.dispose
    @item_window5.dispose
    @item_window6.dispose
    @item_window7.dispose
  end
  #--------------------------------------------------------------------------
  # ● 刷新
  #--------------------------------------------------------------------------
  def refresh
    # 设置物品窗口的可视状态
    @item_window1.visible = (@right_window.index == 0)
    @item_window2.visible = (@right_window.index == 1)
    @item_window3.visible = (@right_window.index == 2)
    @item_window4.visible = (@right_window.index == 3)
    @item_window5.visible = (@right_window.index == 4)
    @item_window6.visible = (@right_window.index == 5)
    @item_window7.visible = (@right_window.index == 6)
    # 获取当前装备中的物品
    item1 = @right_window.item
    # 设置当前的物品窗口到 @item_window
    case @right_window.index
    when 0
      @item_window = @item_window1
    when 1
      @item_window = @item_window2
    when 2
      @item_window = @item_window3
    when 3
      @item_window = @item_window4
    when 4
      @item_window = @item_window5
    when 5
      @item_window = @item_window6
    when 6
      @item_window = @item_window7
    end
    # 右窗口被激活的情况下
    if @right_window.active
      # 删除变更装备后的能力
    ###############################################################
      @left_window.set_new_parameters(nil, nil, nil, nil, nil, nil, nil, nil)
    end
    # 物品窗口被激活的情况下
    if @item_window.active
      # 获取现在选中的物品
      item2 = @item_window.item
      # 变更装备
      last_hp = @actor.hp
      last_sp = @actor.sp
      @actor.equip(@right_window.index, item2 == nil ? 0 : item2.id)
    ###############################################################
      # 获取变更装备后的能力值
      new_atk = @actor.atk
      new_pdef = @actor.pdef
      new_mdef = @actor.mdef
      new_eva = @actor.eva
      new_str = @actor.str
      new_dex = @actor.dex
      new_agi = @actor.agi
      new_int = @actor.int
      # 返回到装备
      @actor.equip(@right_window.index, item1 == nil ? 0 : item1.id)
      @actor.hp = last_hp
      @actor.sp = last_sp
      # 描画左窗口
    ###############################################################
      @left_window.set_new_parameters(new_atk, new_pdef, new_mdef, new_eva, new_str, new_dex, new_agi, new_int)
    ###############################################################
    end
  end
end
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#              状态窗口美化，全防具装备栏描绘
#
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#==============================================================================
# ■ Window_Status
#------------------------------------------------------------------------------
# 　显示状态画面、完全规格的状态窗口。
#==============================================================================

class Window_Status < Window_Base
  #--------------------------------------------------------------------------
  # ● 刷新
  #--------------------------------------------------------------------------
  def refresh
    self.contents.clear
    draw_actor_graphic(@actor, 40, 112)
    draw_actor_name(@actor, 4, 0)
    draw_actor_class(@actor, 4 + 144, 0)
    draw_actor_level(@actor, 96, 32)
    draw_actor_state(@actor, 96, 64)
    draw_actor_hp(@actor, 96, 112, 172)
    draw_actor_sp(@actor, 96, 144, 172)
    draw_actor_parameter(@actor, 96, 192, 0)
    draw_actor_parameter(@actor, 96, 224, 1)
    draw_actor_parameter(@actor, 96, 256, 2)
    draw_actor_parameter(@actor, 96, 304, 3)
    draw_actor_parameter(@actor, 96, 336, 4)
    draw_actor_parameter(@actor, 96, 368, 5)
    draw_actor_parameter(@actor, 96, 400, 6)
    self.contents.font.color = system_color
    self.contents.draw_text(320, 48, 80, 32, "总经验值")
    self.contents.draw_text(320, 80, 80, 32, "距离升级")
    self.contents.font.color = normal_color
    self.contents.draw_text(320 + 80, 48, 84, 32, @actor.exp_s, 2)
    self.contents.draw_text(320 + 80, 80, 84, 32, @actor.next_rest_exp_s, 2)
    self.contents.font.color = system_color
    self.contents.draw_text(320, 160, 96, 32, "装备")
    draw_item_name($data_weapons[@actor.weapon_id], 320 + 16, 208)
    draw_item_name($data_armors[@actor.armor1_id], 320 + 16, 240)
    draw_item_name($data_armors[@actor.armor2_id], 320 + 16, 272)
    draw_item_name($data_armors[@actor.armor3_id], 320 + 16, 304)
    draw_item_name($data_armors[@actor.armor4_id], 320 + 16, 336)
    draw_item_name($data_armors[@actor.armor5_id], 320 + 16, 368)
    draw_item_name($data_armors[@actor.armor6_id], 320 + 16, 400)
  end
  def dummy
    self.contents.font.color = system_color
    self.contents.draw_text(320, 112, 96, 32, $data_system.words.weapon)
    self.contents.draw_text(320, 176, 96, 32, $data_system.words.armor1)
    self.contents.draw_text(320, 240, 96, 32, $data_system.words.armor2)
    self.contents.draw_text(320, 304, 96, 32, $data_system.words.armor3)
    self.contents.draw_text(320, 368, 96, 32, $data_system.words.armor4)
    draw_item_name($data_weapons[@actor.weapon_id], 320 + 24, 144)
    draw_item_name($data_armors[@actor.armor1_id], 320 + 24, 208)
    draw_item_name($data_armors[@actor.armor2_id], 320 + 24, 272)
    draw_item_name($data_armors[@actor.armor3_id], 320 + 24, 336)
    draw_item_name($data_armors[@actor.armor4_id], 320 + 24, 400)
  end
end
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#              商店购买窗口美化，增加对新装备位置的描述
#
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#==============================================================================
# ■ Window_ShopStatus
#------------------------------------------------------------------------------
# 　商店画面、显示物品所持数与角色装备的窗口。
#==============================================================================

class Window_ShopStatus < Window_Base
  #--------------------------------------------------------------------------
  # ● 刷新
  #--------------------------------------------------------------------------
  def refresh
    self.contents.clear
    if @item == nil
      return
    end
    case @item
    when RPG::Item
      number = $game_party.item_number(@item.id)
    when RPG::Weapon
      number = $game_party.weapon_number(@item.id)
    when RPG::Armor
      number = $game_party.armor_number(@item.id)
    end
    self.contents.font.color = system_color
    self.contents.draw_text(4, 0, 200, 32, "所持数")
    self.contents.font.color = normal_color
    self.contents.draw_text(204, 0, 32, 32, number.to_s, 2)
    if @item.is_a?(RPG::Item)
      return
    end
    # 添加装备品信息
    for i in 0...$game_party.actors.size
      # 获取角色
      actor = $game_party.actors
      # 可以装备为普通文字颜色、不能装备设置为无效文字颜色
      if actor.equippable?(@item)
        self.contents.font.color = normal_color
      else
        self.contents.font.color = disabled_color
      end
      # 描绘角色名字
      self.contents.draw_text(4, 64 + 64 * i, 120, 32, actor.name)
      # 获取当前的装备品
      if @item.is_a?(RPG::Weapon)
        item1 = $data_weapons[actor.weapon_id]
      elsif @item.kind == 0
        item1 = $data_armors[actor.armor1_id]
      elsif @item.kind == 1
        item1 = $data_armors[actor.armor2_id]
      elsif @item.kind == 2
        item1 = $data_armors[actor.armor3_id]
      elsif @item.kind == 3
        item1 = $data_armors[actor.armor4_id]
      elsif @item.kind == 4
        item1 = $data_armors[actor.armor5_id]
      else# if @item.kind == 5
        item1 = $data_armors[actor.armor6_id]
      end
      # 可以装备的情况
      if actor.equippable?(@item)
        # 武器的情况
        if @item.is_a?(RPG::Weapon)
          atk1 = item1 != nil ? item1.atk : 0
          atk2 = @item != nil ? @item.atk : 0
          change = atk2 - atk1
        end
        # 防具的情况
        if @item.is_a?(RPG::Armor)
          pdef1 = item1 != nil ? item1.pdef : 0
          mdef1 = item1 != nil ? item1.mdef : 0
          pdef2 = @item != nil ? @item.pdef : 0
          mdef2 = @item != nil ? @item.mdef : 0
          change = pdef2 - pdef1 + mdef2 - mdef1
        end
        # 描绘能力值变化
        self.contents.draw_text(124, 64 + 64 * i, 112, 32,
          sprintf("%+d", change), 2)
      end
      # 描绘物品
      if item1 != nil
        x = 4
        y = 64 + 64 * i + 32
        bitmap = RPG::Cache.icon(item1.icon_name)
        opacity = self.contents.font.color == normal_color ? 255 : 128
        self.contents.blt(x, y + 4, bitmap, Rect.new(0, 0, 24, 24), opacity)
        self.contents.draw_text(x + 28, y, 212, 32, item1.name)
      end
    end
  end
end
作者: 末画王道    时间: 2021-7-7 16:45
我用的是这个脚本，请大佬们帮忙看下
作者: Cupidk爱呗茶    时间: 2021-7-8 15:17
仔细观察脚本的Armor类会发现在kind方法做了额外获取种类ID的用法
  1. kind  = @name.split(/,/)[1]
复制代码

取防具名字符串用于split方法分割 比方说我们的防具名为 “水戒指,4” 使用split方法的正则匹配/,/后会变成[“水戒指”，"4"] “4”.to_i取得数字 然后也就顺理成章的设置了这个装备的新种类ID
  1. # ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
  2. #
  3. #                                防具类追加
  4. #
  5. # ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
  6. module RPG
  7.   class Armor
  8.     def kind
  9.       kind  = @name.split(/,/)[1]
  10.       return kind  != nil ? kind.to_i : @kind
  11.     end
  12.   end
  13. end
复制代码



脚本是没问题的
不过总而言之脚本注释还是很重要的了
作者: 末画王道    时间: 2021-7-9 16:04
Cupidk爱呗茶 发表于 2021-7-8 15:17
仔细观察脚本的Armor类会发现在kind方法做了额外获取种类ID的用法

取防具名字符串用于split方法分割 比方 ...

非常感谢
作者: 末画王道    时间: 2021-7-9 16:30
Cupidk爱呗茶 发表于 2021-7-8 15:17
仔细观察脚本的Armor类会发现在kind方法做了额外获取种类ID的用法

取防具名字符串用于split方法分割 比方 ...

还想请问下为什么我自己新建的装备不能用这个方法读取，好像只有上面那些系统自带的装备有效
作者: 末画王道    时间: 2021-7-9 16:33
Cupidk爱呗茶 发表于 2021-7-8 15:17
仔细观察脚本的Armor类会发现在kind方法做了额外获取种类ID的用法

取防具名字符串用于split方法分割 比方 ...

C:/Users/Administrator/Desktop/问题.PNG
作者: 末画王道    时间: 2021-7-9 16:35
像这个样子

问题.PNG (50.29 KB, 下载次数: 21)

问题.PNG
作者: Cupidk爱呗茶    时间: 2021-7-9 17:11
本帖最后由 Cupidk爱呗茶 于 2021-7-9 17:13 编辑
末画王道 发表于 2021-7-9 16:35
像这个样子


这个...可以试着检查一下新装备是否勾选进了角色职业中的可装备物品
作者: 末画王道    时间: 2021-7-9 17:24
Cupidk爱呗茶 发表于 2021-7-9 17:11
这个...可以试着检查一下新装备是否勾选进了角色职业中的可装备物品

感谢感谢，看了一天不知道问题出哪（笑哭）
感谢大佬
作者: djs789783    时间: 2023-12-29 14:42
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
#
#                                防具类追加
#
# ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
module RPG
  class Armor
    def kind
      kind  = @name.split(/,/)[1]
      return kind  != nil ? kind.to_i : @kind
    end
  end
end
这个脚本是盾追加，要怎么改成更多类别的方法？



欢迎光临 Project1 (https://rpg.blue/) Powered by Discuz! X3.1