Project1

标题: 等级上限突破脚本的问题..... [打印本页]
作者: jhhuang    时间: 2007-8-27 04:13
标题: 等级上限突破脚本的问题.....
使用了这个脚本....使用正常..但属性异常
本来99级3000左右SP的,但用了这个脚本,99级就有30000左右SP了,其他属性也是
完全异常....有办法突破,但不改变原设置吗?

  1. #==============================================================================
  2. # 本脚本来自www.66RPG.com，使用和转载请保留此信息
  3. #==============================================================================

  5. #等级可无限提升
  6. #パラメータの算出が適当すぎるので、各自修正が必要かと。

  8.   BASE_FINAL_LEVEL = 150   #上限レベル(あんまり大きな値を設定するとハングします)
  9.   MAXHP_LIMIT = 999999    #HP限界値
  10.   MAXSP_LIMIT = 999999    #SP限界値
  11.   STR_LIMIT   = 99999      #STR限界値
  12.   DEX_LIMIT   = 99999      #DEX限界値
  13.   AGI_LIMIT   = 99999      #AGI限界値
  14.   INT_LIMIT   = 99999      #INT限界値

  16. class Game_Actor < Game_Battler
  17.   def new_final_level
  18.     lv = BASE_FINAL_LEVEL
  19.     #以下上限LV個別指定用
  20.     #case self.id
  21.     #when 1
  22.     #  lv = 255
  23.     #when 2
  24.     #  lv = 999
  25.     #when 8
  26.     #  lv = 15600
  27.     #end
  28.     return lv
  29.   end
  30.   #--------------------------------------------------------------------------
  31.   # ● EXP 計算
  32.   #--------------------------------------------------------------------------
  33.   def make_exp_list
  34.     actor = $data_actors[@actor_id]
  35.     @exp_list = Array.new(new_final_level + 2)
  36.     @exp_list[1] = 0
  37.     pow_i = 2.4 + actor.exp_inflation / 100.0
  38.     for i in 2..new_final_level + 1
  39.       if i > new_final_level
  40.         @exp_list[i] = 0
  41.       else
  42.         n = actor.exp_basis * ((i + 3) ** pow_i) / (5 ** pow_i)
  43.         @exp_list[i] = @exp_list[i-1] + Integer(n)
  44.       end
  45.     end
  46.   end
  47.   #--------------------------------------------------------------------------
  48.   # ● MaxHP の取得
  49.   #--------------------------------------------------------------------------
  50.   def maxhp
  51.     n = [[base_maxhp + @maxhp_plus, 1].max, MAXHP_LIMIT].min
  52.     for i in @states
  53.       n *= $data_states[i].maxhp_rate / 100.0
  54.     end
  55.     n = [[Integer(n), 1].max, MAXHP_LIMIT].min
  56.     return n
  57.   end
  58.   #--------------------------------------------------------------------------
  59.   # ● 基本 MaxHP の取得
  60.   #--------------------------------------------------------------------------
  61.   def base_maxhp
  62.     n = $data_actors[@actor_id].parameters[0, 1]
  63.     n += $data_actors[@actor_id].parameters[0, 2] * @level
  64.     return n
  65.   end
  66.   #--------------------------------------------------------------------------
  67.   # ● 基本 MaxSP の取得
  68.   #--------------------------------------------------------------------------
  69.   def base_maxsp
  70.     n = $data_actors[@actor_id].parameters[1, 1]
  71.     n += $data_actors[@actor_id].parameters[1, 2] * @level
  72.     return n
  73.   end
  74.   #--------------------------------------------------------------------------
  75.   # ● 基本腕力の取得
  76.   #--------------------------------------------------------------------------
  77.   def base_str
  78.     n = $data_actors[@actor_id].parameters[2, 1]
  79.     n += $data_actors[@actor_id].parameters[2, 2] * @level
  80.     weapon = $data_weapons[@weapon_id]
  81.     armor1 = $data_armors[@armor1_id]
  82.     armor2 = $data_armors[@armor2_id]
  83.     armor3 = $data_armors[@armor3_id]
  84.     armor4 = $data_armors[@armor4_id]
  85.     n += weapon != nil ? weapon.str_plus : 0
  86.     n += armor1 != nil ? armor1.str_plus : 0
  87.     n += armor2 != nil ? armor2.str_plus : 0
  88.     n += armor3 != nil ? armor3.str_plus : 0
  89.     n += armor4 != nil ? armor4.str_plus : 0
  90.     return [[n, 1].max, STR_LIMIT].min
  91.   end
  92.   #--------------------------------------------------------------------------
  93.   # ● 基本器用さの取得
  94.   #--------------------------------------------------------------------------
  95.   def base_dex
  96.     n = $data_actors[@actor_id].parameters[3, 1]
  97.     n += $data_actors[@actor_id].parameters[3, 2] * @level
  98.     weapon = $data_weapons[@weapon_id]
  99.     armor1 = $data_armors[@armor1_id]
  100.     armor2 = $data_armors[@armor2_id]
  101.     armor3 = $data_armors[@armor3_id]
  102.     armor4 = $data_armors[@armor4_id]
  103.     n += weapon != nil ? weapon.dex_plus : 0
  104.     n += armor1 != nil ? armor1.dex_plus : 0
  105.     n += armor2 != nil ? armor2.dex_plus : 0
  106.     n += armor3 != nil ? armor3.dex_plus : 0
  107.     n += armor4 != nil ? armor4.dex_plus : 0
  108.     return [[n, 1].max, DEX_LIMIT].min
  109.   end
  110.   #--------------------------------------------------------------------------
  111.   # ● 基本素早さの取得
  112.   #--------------------------------------------------------------------------
  113.   def base_agi
  114.     n = $data_actors[@actor_id].parameters[4, 1]
  115.     n += $data_actors[@actor_id].parameters[4, 2] * @level
  116.     weapon = $data_weapons[@weapon_id]
  117.     armor1 = $data_armors[@armor1_id]
  118.     armor2 = $data_armors[@armor2_id]
  119.     armor3 = $data_armors[@armor3_id]
  120.     armor4 = $data_armors[@armor4_id]
  121.     n += weapon != nil ? weapon.agi_plus : 0
  122.     n += armor1 != nil ? armor1.agi_plus : 0
  123.     n += armor2 != nil ? armor2.agi_plus : 0
  124.     n += armor3 != nil ? armor3.agi_plus : 0
  125.     n += armor4 != nil ? armor4.agi_plus : 0
  126.     return [[n, 1].max, AGI_LIMIT].min
  127.   end
  128.   #--------------------------------------------------------------------------
  129.   # ● 基本魔力の取得
  130.   #--------------------------------------------------------------------------
  131.   def base_int
  132.     n = $data_actors[@actor_id].parameters[5, 1]
  133.     n += $data_actors[@actor_id].parameters[5, 2] * @level
  134.     weapon = $data_weapons[@weapon_id]
  135.     armor1 = $data_armors[@armor1_id]
  136.     armor2 = $data_armors[@armor2_id]
  137.     armor3 = $data_armors[@armor3_id]
  138.     armor4 = $data_armors[@armor4_id]
  139.     n += weapon != nil ? weapon.int_plus : 0
  140.     n += armor1 != nil ? armor1.int_plus : 0
  141.     n += armor2 != nil ? armor2.int_plus : 0
  142.     n += armor3 != nil ? armor3.int_plus : 0
  143.     n += armor4 != nil ? armor4.int_plus : 0
  144.     return [[n, 1].max, INT_LIMIT].min
  145.   end
  146.   #--------------------------------------------------------------------------
  147.   # ● EXP の変更
  148.   #     exp : 新しい EXP
  149.   #--------------------------------------------------------------------------
  150.   def exp=(exp)
  151.     # ★EXPの上限チェックを解除
  152.     @exp = [exp, 0].max
  153.     # レベルアップ
  154.     while @exp >= @exp_list[@level+1] and @exp_list[@level+1] > 0
  155.       @level += 1
  156.       # スキル習得
  157.       for j in $data_classes[@class_id].learnings
  158.         if j.level == @level
  159.           learn_skill(j.skill_id)
  160.         end
  161.       end
  162.     end
  163.     # レベルダウン
  164.     while @exp < @exp_list[@level]
  165.       @level -= 1
  166.     end
  167.     # 現在の HP と SP が最大値を超えていたら修正
  168.     @hp = [@hp, self.maxhp].min
  169.     @sp = [@sp, self.maxsp].min
  170.   end
  171.   #--------------------------------------------------------------------------
  172.   # ● レベルの変更
  173.   #     level : 新しいレベル
  174.   #--------------------------------------------------------------------------
  175.   def level=(level)
  176.     # 上下限チェック
  177.     # ★LV上限をnew_final_levelでチェックするように変更
  178.     level = [[level, new_final_level].min, 1].max
  179.     # EXP を変更
  180.     self.exp = @exp_list[level]
  181.   end
  182. end
  183.   
  184.   
  185. class Game_Battler
  186.   #--------------------------------------------------------------------------
  187.   # ● MaxSP の取得
  188.   #--------------------------------------------------------------------------
  189.   def maxsp
  190.     n = [[base_maxsp + @maxsp_plus, 0].max, MAXSP_LIMIT].min
  191.     for i in @states
  192.       n *= $data_states[i].maxsp_rate / 100.0
  193.     end
  194.     n = [[Integer(n), 0].max, MAXSP_LIMIT].min
  195.     return n
  196.   end
  197.   #--------------------------------------------------------------------------
  198.   # ● 腕力の取得
  199.   #--------------------------------------------------------------------------
  200.   def str
  201.     n = [[base_str + @str_plus, 1].max, STR_LIMIT].min
  202.     for i in @states
  203.       n *= $data_states[i].str_rate / 100.0
  204.     end
  205.     n = [[Integer(n), 1].max, STR_LIMIT].min
  206.     return n
  207.   end
  208.   #--------------------------------------------------------------------------
  209.   # ● 器用さの取得
  210.   #--------------------------------------------------------------------------
  211.   def dex
  212.     n = [[base_dex + @dex_plus, 1].max, DEX_LIMIT].min
  213.     for i in @states
  214.       n *= $data_states[i].dex_rate / 100.0
  215.     end
  216.     n = [[Integer(n), 1].max, DEX_LIMIT].min
  217.     return n
  218.   end
  219.   #--------------------------------------------------------------------------
  220.   # ● 素早さの取得
  221.   #--------------------------------------------------------------------------
  222.   def agi
  223.     n = [[base_agi + @agi_plus, 1].max, AGI_LIMIT].min
  224.     for i in @states
  225.       n *= $data_states[i].agi_rate / 100.0
  226.     end
  227.     n = [[Integer(n), 1].max, AGI_LIMIT].min
  228.     return n
  229.   end
  230.   #--------------------------------------------------------------------------
  231.   # ● 魔力の取得
  232.   #--------------------------------------------------------------------------
  233.   def int
  234.     n = [[base_int + @int_plus, 1].max, INT_LIMIT].min
  235.     for i in @states
  236.       n *= $data_states[i].int_rate / 100.0
  237.     end
  238.     n = [[Integer(n), 1].max, INT_LIMIT].min
  239.     return n
  240.   end
  241.   #--------------------------------------------------------------------------
  242.   # ● MaxHP の設定
  243.   #     maxhp : 新しい MaxHP
  244.   #--------------------------------------------------------------------------
  245.   def maxhp=(maxhp)
  246.     @maxhp_plus += maxhp - self.maxhp
  247.     @maxhp_plus = [[@maxhp_plus, -MAXHP_LIMIT].max, MAXHP_LIMIT].min
  248.     @hp = [@hp, self.maxhp].min
  249.   end
  250.   #--------------------------------------------------------------------------
  251.   # ● MaxSP の設定
  252.   #     maxsp : 新しい MaxSP
  253.   #--------------------------------------------------------------------------
  254.   def maxsp=(maxsp)
  255.     @maxsp_plus += maxsp - self.maxsp
  256.     @maxsp_plus = [[@maxsp_plus, -MAXSP_LIMIT].max, MAXSP_LIMIT].min
  257.     @sp = [@sp, self.maxsp].min
  258.   end
  259.   #--------------------------------------------------------------------------
  260.   # ● 腕力の設定
  261.   #     str : 新しい腕力
  262.   #--------------------------------------------------------------------------
  263.   def str=(str)
  264.     @str_plus += str - self.str
  265.     @str_plus = [[@str_plus, -STR_LIMIT].max, STR_LIMIT].min
  266.   end
  267.   #--------------------------------------------------------------------------
  268.   # ● 器用さの設定
  269.   #     dex : 新しい器用さ
  270.   #--------------------------------------------------------------------------
  271.   def dex=(dex)
  272.     @dex_plus += dex - self.dex
  273.     @dex_plus = [[@dex_plus, -DEX_LIMIT].max, DEX_LIMIT].min
  274.   end
  275.   #--------------------------------------------------------------------------
  276.   # ● 素早さの設定
  277.   #     agi : 新しい素早さ
  278.   #--------------------------------------------------------------------------
  279.   def agi=(agi)
  280.     @agi_plus += agi - self.agi
  281.     @agi_plus = [[@agi_plus, -AGI_LIMIT].max, AGI_LIMIT].min
  282.   end
  283.   #--------------------------------------------------------------------------
  284.   # ● 魔力の設定
  285.   #     int : 新しい魔力
  286.   #--------------------------------------------------------------------------
  287.   def int=(int)
  288.     @int_plus += int - self.int
  289.     @int_plus = [[@int_plus, -INT_LIMIT].max, INT_LIMIT].min
  290.   end
  291. end

  293. #==============================================================================
  294. # 本脚本来自www.66RPG.com，使用和转载请保留此信息
  295. #==============================================================================
复制代码
作者: jhhuang    时间: 2007-8-27 04:13
标题: 等级上限突破脚本的问题.....
使用了这个脚本....使用正常..但属性异常
本来99级3000左右SP的,但用了这个脚本,99级就有30000左右SP了,其他属性也是
完全异常....有办法突破,但不改变原设置吗?

  1. #==============================================================================
  2. # 本脚本来自www.66RPG.com，使用和转载请保留此信息
  3. #==============================================================================

  5. #等级可无限提升
  6. #パラメータの算出が適当すぎるので、各自修正が必要かと。

  8.   BASE_FINAL_LEVEL = 150   #上限レベル(あんまり大きな値を設定するとハングします)
  9.   MAXHP_LIMIT = 999999    #HP限界値
  10.   MAXSP_LIMIT = 999999    #SP限界値
  11.   STR_LIMIT   = 99999      #STR限界値
  12.   DEX_LIMIT   = 99999      #DEX限界値
  13.   AGI_LIMIT   = 99999      #AGI限界値
  14.   INT_LIMIT   = 99999      #INT限界値

  16. class Game_Actor < Game_Battler
  17.   def new_final_level
  18.     lv = BASE_FINAL_LEVEL
  19.     #以下上限LV個別指定用
  20.     #case self.id
  21.     #when 1
  22.     #  lv = 255
  23.     #when 2
  24.     #  lv = 999
  25.     #when 8
  26.     #  lv = 15600
  27.     #end
  28.     return lv
  29.   end
  30.   #--------------------------------------------------------------------------
  31.   # ● EXP 計算
  32.   #--------------------------------------------------------------------------
  33.   def make_exp_list
  34.     actor = $data_actors[@actor_id]
  35.     @exp_list = Array.new(new_final_level + 2)
  36.     @exp_list[1] = 0
  37.     pow_i = 2.4 + actor.exp_inflation / 100.0
  38.     for i in 2..new_final_level + 1
  39.       if i > new_final_level
  40.         @exp_list[i] = 0
  41.       else
  42.         n = actor.exp_basis * ((i + 3) ** pow_i) / (5 ** pow_i)
  43.         @exp_list[i] = @exp_list[i-1] + Integer(n)
  44.       end
  45.     end
  46.   end
  47.   #--------------------------------------------------------------------------
  48.   # ● MaxHP の取得
  49.   #--------------------------------------------------------------------------
  50.   def maxhp
  51.     n = [[base_maxhp + @maxhp_plus, 1].max, MAXHP_LIMIT].min
  52.     for i in @states
  53.       n *= $data_states[i].maxhp_rate / 100.0
  54.     end
  55.     n = [[Integer(n), 1].max, MAXHP_LIMIT].min
  56.     return n
  57.   end
  58.   #--------------------------------------------------------------------------
  59.   # ● 基本 MaxHP の取得
  60.   #--------------------------------------------------------------------------
  61.   def base_maxhp
  62.     n = $data_actors[@actor_id].parameters[0, 1]
  63.     n += $data_actors[@actor_id].parameters[0, 2] * @level
  64.     return n
  65.   end
  66.   #--------------------------------------------------------------------------
  67.   # ● 基本 MaxSP の取得
  68.   #--------------------------------------------------------------------------
  69.   def base_maxsp
  70.     n = $data_actors[@actor_id].parameters[1, 1]
  71.     n += $data_actors[@actor_id].parameters[1, 2] * @level
  72.     return n
  73.   end
  74.   #--------------------------------------------------------------------------
  75.   # ● 基本腕力の取得
  76.   #--------------------------------------------------------------------------
  77.   def base_str
  78.     n = $data_actors[@actor_id].parameters[2, 1]
  79.     n += $data_actors[@actor_id].parameters[2, 2] * @level
  80.     weapon = $data_weapons[@weapon_id]
  81.     armor1 = $data_armors[@armor1_id]
  82.     armor2 = $data_armors[@armor2_id]
  83.     armor3 = $data_armors[@armor3_id]
  84.     armor4 = $data_armors[@armor4_id]
  85.     n += weapon != nil ? weapon.str_plus : 0
  86.     n += armor1 != nil ? armor1.str_plus : 0
  87.     n += armor2 != nil ? armor2.str_plus : 0
  88.     n += armor3 != nil ? armor3.str_plus : 0
  89.     n += armor4 != nil ? armor4.str_plus : 0
  90.     return [[n, 1].max, STR_LIMIT].min
  91.   end
  92.   #--------------------------------------------------------------------------
  93.   # ● 基本器用さの取得
  94.   #--------------------------------------------------------------------------
  95.   def base_dex
  96.     n = $data_actors[@actor_id].parameters[3, 1]
  97.     n += $data_actors[@actor_id].parameters[3, 2] * @level
  98.     weapon = $data_weapons[@weapon_id]
  99.     armor1 = $data_armors[@armor1_id]
  100.     armor2 = $data_armors[@armor2_id]
  101.     armor3 = $data_armors[@armor3_id]
  102.     armor4 = $data_armors[@armor4_id]
  103.     n += weapon != nil ? weapon.dex_plus : 0
  104.     n += armor1 != nil ? armor1.dex_plus : 0
  105.     n += armor2 != nil ? armor2.dex_plus : 0
  106.     n += armor3 != nil ? armor3.dex_plus : 0
  107.     n += armor4 != nil ? armor4.dex_plus : 0
  108.     return [[n, 1].max, DEX_LIMIT].min
  109.   end
  110.   #--------------------------------------------------------------------------
  111.   # ● 基本素早さの取得
  112.   #--------------------------------------------------------------------------
  113.   def base_agi
  114.     n = $data_actors[@actor_id].parameters[4, 1]
  115.     n += $data_actors[@actor_id].parameters[4, 2] * @level
  116.     weapon = $data_weapons[@weapon_id]
  117.     armor1 = $data_armors[@armor1_id]
  118.     armor2 = $data_armors[@armor2_id]
  119.     armor3 = $data_armors[@armor3_id]
  120.     armor4 = $data_armors[@armor4_id]
  121.     n += weapon != nil ? weapon.agi_plus : 0
  122.     n += armor1 != nil ? armor1.agi_plus : 0
  123.     n += armor2 != nil ? armor2.agi_plus : 0
  124.     n += armor3 != nil ? armor3.agi_plus : 0
  125.     n += armor4 != nil ? armor4.agi_plus : 0
  126.     return [[n, 1].max, AGI_LIMIT].min
  127.   end
  128.   #--------------------------------------------------------------------------
  129.   # ● 基本魔力の取得
  130.   #--------------------------------------------------------------------------
  131.   def base_int
  132.     n = $data_actors[@actor_id].parameters[5, 1]
  133.     n += $data_actors[@actor_id].parameters[5, 2] * @level
  134.     weapon = $data_weapons[@weapon_id]
  135.     armor1 = $data_armors[@armor1_id]
  136.     armor2 = $data_armors[@armor2_id]
  137.     armor3 = $data_armors[@armor3_id]
  138.     armor4 = $data_armors[@armor4_id]
  139.     n += weapon != nil ? weapon.int_plus : 0
  140.     n += armor1 != nil ? armor1.int_plus : 0
  141.     n += armor2 != nil ? armor2.int_plus : 0
  142.     n += armor3 != nil ? armor3.int_plus : 0
  143.     n += armor4 != nil ? armor4.int_plus : 0
  144.     return [[n, 1].max, INT_LIMIT].min
  145.   end
  146.   #--------------------------------------------------------------------------
  147.   # ● EXP の変更
  148.   #     exp : 新しい EXP
  149.   #--------------------------------------------------------------------------
  150.   def exp=(exp)
  151.     # ★EXPの上限チェックを解除
  152.     @exp = [exp, 0].max
  153.     # レベルアップ
  154.     while @exp >= @exp_list[@level+1] and @exp_list[@level+1] > 0
  155.       @level += 1
  156.       # スキル習得
  157.       for j in $data_classes[@class_id].learnings
  158.         if j.level == @level
  159.           learn_skill(j.skill_id)
  160.         end
  161.       end
  162.     end
  163.     # レベルダウン
  164.     while @exp < @exp_list[@level]
  165.       @level -= 1
  166.     end
  167.     # 現在の HP と SP が最大値を超えていたら修正
  168.     @hp = [@hp, self.maxhp].min
  169.     @sp = [@sp, self.maxsp].min
  170.   end
  171.   #--------------------------------------------------------------------------
  172.   # ● レベルの変更
  173.   #     level : 新しいレベル
  174.   #--------------------------------------------------------------------------
  175.   def level=(level)
  176.     # 上下限チェック
  177.     # ★LV上限をnew_final_levelでチェックするように変更
  178.     level = [[level, new_final_level].min, 1].max
  179.     # EXP を変更
  180.     self.exp = @exp_list[level]
  181.   end
  182. end
  183.   
  184.   
  185. class Game_Battler
  186.   #--------------------------------------------------------------------------
  187.   # ● MaxSP の取得
  188.   #--------------------------------------------------------------------------
  189.   def maxsp
  190.     n = [[base_maxsp + @maxsp_plus, 0].max, MAXSP_LIMIT].min
  191.     for i in @states
  192.       n *= $data_states[i].maxsp_rate / 100.0
  193.     end
  194.     n = [[Integer(n), 0].max, MAXSP_LIMIT].min
  195.     return n
  196.   end
  197.   #--------------------------------------------------------------------------
  198.   # ● 腕力の取得
  199.   #--------------------------------------------------------------------------
  200.   def str
  201.     n = [[base_str + @str_plus, 1].max, STR_LIMIT].min
  202.     for i in @states
  203.       n *= $data_states[i].str_rate / 100.0
  204.     end
  205.     n = [[Integer(n), 1].max, STR_LIMIT].min
  206.     return n
  207.   end
  208.   #--------------------------------------------------------------------------
  209.   # ● 器用さの取得
  210.   #--------------------------------------------------------------------------
  211.   def dex
  212.     n = [[base_dex + @dex_plus, 1].max, DEX_LIMIT].min
  213.     for i in @states
  214.       n *= $data_states[i].dex_rate / 100.0
  215.     end
  216.     n = [[Integer(n), 1].max, DEX_LIMIT].min
  217.     return n
  218.   end
  219.   #--------------------------------------------------------------------------
  220.   # ● 素早さの取得
  221.   #--------------------------------------------------------------------------
  222.   def agi
  223.     n = [[base_agi + @agi_plus, 1].max, AGI_LIMIT].min
  224.     for i in @states
  225.       n *= $data_states[i].agi_rate / 100.0
  226.     end
  227.     n = [[Integer(n), 1].max, AGI_LIMIT].min
  228.     return n
  229.   end
  230.   #--------------------------------------------------------------------------
  231.   # ● 魔力の取得
  232.   #--------------------------------------------------------------------------
  233.   def int
  234.     n = [[base_int + @int_plus, 1].max, INT_LIMIT].min
  235.     for i in @states
  236.       n *= $data_states[i].int_rate / 100.0
  237.     end
  238.     n = [[Integer(n), 1].max, INT_LIMIT].min
  239.     return n
  240.   end
  241.   #--------------------------------------------------------------------------
  242.   # ● MaxHP の設定
  243.   #     maxhp : 新しい MaxHP
  244.   #--------------------------------------------------------------------------
  245.   def maxhp=(maxhp)
  246.     @maxhp_plus += maxhp - self.maxhp
  247.     @maxhp_plus = [[@maxhp_plus, -MAXHP_LIMIT].max, MAXHP_LIMIT].min
  248.     @hp = [@hp, self.maxhp].min
  249.   end
  250.   #--------------------------------------------------------------------------
  251.   # ● MaxSP の設定
  252.   #     maxsp : 新しい MaxSP
  253.   #--------------------------------------------------------------------------
  254.   def maxsp=(maxsp)
  255.     @maxsp_plus += maxsp - self.maxsp
  256.     @maxsp_plus = [[@maxsp_plus, -MAXSP_LIMIT].max, MAXSP_LIMIT].min
  257.     @sp = [@sp, self.maxsp].min
  258.   end
  259.   #--------------------------------------------------------------------------
  260.   # ● 腕力の設定
  261.   #     str : 新しい腕力
  262.   #--------------------------------------------------------------------------
  263.   def str=(str)
  264.     @str_plus += str - self.str
  265.     @str_plus = [[@str_plus, -STR_LIMIT].max, STR_LIMIT].min
  266.   end
  267.   #--------------------------------------------------------------------------
  268.   # ● 器用さの設定
  269.   #     dex : 新しい器用さ
  270.   #--------------------------------------------------------------------------
  271.   def dex=(dex)
  272.     @dex_plus += dex - self.dex
  273.     @dex_plus = [[@dex_plus, -DEX_LIMIT].max, DEX_LIMIT].min
  274.   end
  275.   #--------------------------------------------------------------------------
  276.   # ● 素早さの設定
  277.   #     agi : 新しい素早さ
  278.   #--------------------------------------------------------------------------
  279.   def agi=(agi)
  280.     @agi_plus += agi - self.agi
  281.     @agi_plus = [[@agi_plus, -AGI_LIMIT].max, AGI_LIMIT].min
  282.   end
  283.   #--------------------------------------------------------------------------
  284.   # ● 魔力の設定
  285.   #     int : 新しい魔力
  286.   #--------------------------------------------------------------------------
  287.   def int=(int)
  288.     @int_plus += int - self.int
  289.     @int_plus = [[@int_plus, -INT_LIMIT].max, INT_LIMIT].min
  290.   end
  291. end

  293. #==============================================================================
  294. # 本脚本来自www.66RPG.com，使用和转载请保留此信息
  295. #==============================================================================
复制代码
作者: jhhuang    时间: 2007-8-27 06:04
而且这个脚本对敌人没有效果-.-用了之后敌人全部变成垃圾了.....

可以直接改系统,改到上限255吗-.-?
作者: enghao_lim    时间: 2007-8-27 07:03
LZ,事实上这个问题很简单，因为他把所有的值都乘与了等级，所以会比预想的多。

  #--------------------------------------------------------------------------
  # ● 基本 MaxHP の取得
  #--------------------------------------------------------------------------
  def base_maxhp
    n = $data_actors[@actor_id].parameters[0, 1]
    n += $data_actors[@actor_id].parameters[0, 2] * @level
    return n
  end


只要在红色那行前加一个“#”字符就行了。
不管是HP，SP，力量等都有哦，全部改完就行了。





欢迎光临 Project1 (https://rpg.blue/) Powered by Discuz! X3.1