请各位大虾帮偶改个脚本！ - Project1

#==============================================================================
# ■ スキルアップデート Ver. 4.4.0
#------------------------------------------------------------------------------
# スキルごとにレベル制を導入する
# 戦闘中にスキルを使用するほど、威力上昇、消費SP減少、命中率上昇
#==============================================================================
module Skill_updata
S_MIGHT = []
S_COST = []
S_HIT = []
S_LEVEL = []
S_INTER = []
S_SLOPE = []
S_ANIME = []
S_ELEMENT = []
S_STATE_P = []
S_STATE_N = []
#==============================================================================
# □ 自定义内容
#==============================================================================
# 威力上升使用true/false
SKILL_MIGHT_UP = true
# SP消耗增加使用true/false
SP_COST_DOWN = true
# 命中率上升使用true/false
SKILL_HIT_UP = true
# 属性变化的使用true/false
ELEMENT_CHANGE = true
# 状态变化的使用true/false
STATE_CHANGE = true
# 显示特技等级上升true/false
SHOW_SKILL_LV_UP = true
# 等级上升的声效，不用的时候就=nil
SKILLUP_SE = "技能升级"
# 菜单使用计数true/false
MENU_COUNT = true
# 升级所需次数
UPDATA_INTERVAL = 0
# 等级上限
LEVEL_LIMIT = 10
# 威力上升率(%%)
MIGHT_RATE = 5
# SP消耗减少率(%)
COST_RATE = 5
# 命中上升率(%)
HIT_RATE = 1
#----------------------------------------------------------------------------
# 特别技能的详细设定，57和61号特技分别是十字斩和扫荡，大家最熟悉的两个招数
#----------------------------------------------------------------------------
# 界限水平
# S_LEVEL[技艺ID]＝[角色ID=>界限，…]
S_LEVEL[59] = {1=>18, 2=>12, 3=>5, 4=>12, 5=>12, 6=>12, 7=>12, 8=>12}
S_LEVEL[60] = {1=>12, 2=>18, 3=>15, 4=>12, 5=>12, 6=>12, 7=>12, 8=>12}
# 技艺&actor威力上升率
# S_MIGHT[技艺ID]＝[角色ID=>威力上升率，…]
S_MIGHT[59] = {1=>8, 2=>2, 3=>5, 4=>2, 5=>2, 6=>2, 7=>2, 8=>2}
S_MIGHT[60] = {1=>2, 2=>8, 3=>5, 4=>2, 5=>2, 6=>2, 7=>2, 8=>2}
# 技艺&actorSP消费减少率
# S_COST[技艺ID]＝[角色ID=>SP消费减少率，…]
S_COST[59] = {1=>8, 2=>2, 3=>5, 4=>2, 5=>2, 6=>2, 7=>2, 8=>2}
S_COST[60] = {1=>2, 2=>8, 3=>5, 4=>2, 5=>2, 6=>2, 7=>2, 8=>2}
# 技艺&actor命中率
# S_HIT[技艺ID]＝[角色ID=>命中上升率，…]
S_HIT[59] = {1=>2, 2=>1, 3=>1, 4=>1, 5=>1, 6=>1, 7=>1, 8=>1}
S_HIT[60] = {1=>1, 2=>2, 3=>1, 4=>1, 5=>1, 6=>1, 7=>1, 8=>1}
#----------------------------------------------------------------------------
#　技能成长的具体调节
#----------------------------------------------------------------------------
# 技艺的增长图形
# 0：使用技艺一定回数的话提高水平
# 1：技艺一定回数＋每水平の使用提高水平
SKILL_PATTERN = 1
# 技艺水平上升间隔每(使用几回Lv提高)
# ※没有设定的情况→基本设定被适应
# S_INTER[技艺ID]＝[actorID=>上升间隔，…]
S_INTER[81] = {1=>5, 2=>8, 3=>8, 4=>8, 5=>8, 6=>8, 7=>8, 8=>8}
# スキルレベル上昇の傾き（パターン１を使用する場合のみ必要）
# ※設定がない場合は1となります。
# S_SLOPE[スキルID] = [アクターID=>上昇の傾き, …]
S_SLOPE[57] = {1=>5, 2=>8, 3=>8, 4=>8, 5=>8, 6=>8, 7=>8, 8=>8}
#----------------------------------------------------------------------------
#　技艺增长的话使之动画变化
# 记录格式： S_ANIME[技艺ID] = [角色ID=>[[等级, 动画ID]], ･･･]
#----------------------------------------------------------------------------
# 实施技艺增长的动画变化？
USE_S_ANIME = true
# 設定例
# 1号角色，57号特技，lv5,lv10动画变化
# 2号角色，Lv.11动画变化
S_ANIME[57] = {1=>[[5, 69], [10, 70]], 2=>[[11, 70]]}
#----------------------------------------------------------------------------
#　属性変化／状态変化
#----------------------------------------------------------------------------
# 属性変化
# S_ELEMENT[技艺ID] = {角色ID=>{水平=>[属性ID,属性ID…]}, ････}
S_ELEMENT[57] = {1=>{1=>[1], 2=>[2], 3=>[3]}, 2=>{1=>[2], 2=>[5]}}
# 状态変化＋
# S_STATE_P[技艺ID] = {角色ID=>{水平=>[属性ID,属性ID…]}, ････}
S_STATE_P[57] = {1=>{1=>[1], 2=>[2], 3=>[3]}, 2=>{1=>[2], 2=>[5]}}
# 状态変化－
# S_STATE_N[技艺ID] = {角色ID=>{水平=>[属性ID,属性ID…]}, ････}
S_STATE_N[57] = {1=>{1=>[1], 2=>[2], 3=>[3]}, 2=>{1=>[2], 2=>[5]}}
#==============================================================================
# □ 自定义内容终了
#==============================================================================
end
class Game_Actor
include Skill_updata
attr_accessor :skill_use # スキル使用回数
attr_accessor :skill_level # スキルレベル
attr_accessor :skill_power # スキル威力更新値
attr_accessor :skill_sp_cost # スキルSP消費更新値
attr_accessor :skill_hit # スキル命中率
attr_accessor :skill_up # レベルアップフラグ
attr_accessor :skill_list # スキルEXPリスト
alias skill_updata_init setup
def setup(actor_id)
skill_updata_init(actor_id)
@skill_use = []
@skill_level = []
@skill_power = []
@skill_sp_cost = []
@skill_hit = []
@skill_up = false
@skill_list = []
for id in 1...$data_skills.size
@skill_use[id] = 0
@skill_level[id] = 0
@skill_power[id] = $data_skills[id].power
@skill_sp_cost[id] = $data_skills[id].sp_cost
@skill_hit[id] = $data_skills[id].hit
@skill_list[id] = make_skill_list(id)
end
end
#--------------------------------------------------------------------------
# ● スキルEXP 計算
#--------------------------------------------------------------------------
def make_skill_list(skill_id)
interval = S_INTER[skill_id]
up_interval = ( (interval != nil and interval[@actor_id] != nil) ? interval[@actor_id] : UPDATA_INTERVAL )
slope = S_SLOPE[skill_id]
up_slope = ( (slope != nil and slope[@actor_id] != nil) ? slope[@actor_id] : 1 )
limit = S_LEVEL[skill_id]
limit_lv = ( (limit != nil and limit[@actor_id] != nil) ? limit[@actor_id] : LEVEL_LIMIT )
list = []
list[0] = 0
for lv in 1...limit_lv+1
exp = 0
case SKILL_PATTERN
when 0
exp = up_interval * lv
when 1
exp = list[lv-1] + up_slope * lv + up_interval
end
list[lv] = exp.truncate
end
return list
end
end
class Game_Battler
include Skill_updata
#--------------------------------------------------------------------------
# ● スキルの効果適用
# user : スキルの使用者 (バトラー)
# skill : スキル
#--------------------------------------------------------------------------
alias skill_effect_update skill_effect
def skill_effect(user, skill)
up_flag = false
if user.is_a?(Game_Actor) and ($scene.is_a?(Scene_Battle) or MENU_COUNT)
skill_update_main(user, skill)
skill_base = skill.dup
# 威力上昇
if SKILL_MIGHT_UP
skill.power = user.skill_power[skill.id]
end
# 命中率上昇
if SKILL_HIT_UP
skill.hit = user.skill_hit[skill.id]
end
# 属性変化
if ELEMENT_CHANGE and S_ELEMENT != []
ele1 = S_ELEMENT[skill.id]
if ele1 != nil and ele1[user.id] != nil
ele2 = ele1[user.id]
if ele2 != [] and ele2[user.skill_level[skill.id]] != nil
skill.element_set = ele2[user.skill_level[skill.id]]
end
end
end
# ステート変化
if STATE_CHANGE
if S_STATE_P != []
pst1 = S_STATE_P[skill.id]
if pst1 != nil and pst1[user.id] != nil
pst2 = pst1[user.id]
if pst2 != nil and pst2[user.skill_level[skill.id]] != nil
skill.plus_state_set = pst2[user.skill_level[skill.id]]
p skill.plus_state_set
end
end
end
if S_STATE_N != []
nst1 = S_STATE_N[skill.id]
if nst1 != nil and nst1[user.id] != nil
nst2 = nst1[user.id]
if nst1 != nil and nst2[user.skill_level[skill.id]] != nil
skill.minus_state_set = nst2[user.skill_level[skill.id]]
end
end
end
end
up_flag = true
end
ret = skill_effect_update(user, skill) # 原物
if up_flag
skill = skill_base
# Miss時には後戻し
if self.damage == "Miss"
skill_use_recount(user, skill)
end
end
return ret
end
#--------------------------------------------------------------------------
# ● スキルアップデータメイン
#--------------------------------------------------------------------------
def skill_update_main(actor, skill)
# スキル使用回数のカウント
actor.skill_use[skill.id] += 1
# リミット取得
limit = S_LEVEL[skill.id]
s_limit = ( (limit != nil and limit[actor.id] != nil) ? limit[actor.id] : LEVEL_LIMIT)
# 書き換え限界到達
if s_limit == false or actor.skill_level[skill.id] < s_limit
# レベルアップ間隔取得
interval = actor.skill_list[skill.id]
# 書き換え回数到達
if actor.skill_use[skill.id] == interval[actor.skill_level[skill.id]+1]
# スキルレベル上昇
actor.skill_level[skill.id] += 1
actor.skill_up = true
# 威力上昇 = 有効
if SKILL_MIGHT_UP
might = S_MIGHT[skill.id]
might_rate = ((might != nil and might[actor.id] != nil) ? might[actor.id] : MIGHT_RATE)
# 補正値更新
actor.skill_power[skill.id] += skill.power * might_rate / 100
actor.skill_power[skill.id] = actor.skill_power[skill.id].truncate
end
# SP消費減少 = 有効
if SP_COST_DOWN
cost = S_COST[skill.id]
cost_rate = ((cost != nil and cost[actor.id] != nil) ? cost[actor.id] : COST_RATE)
actor.skill_sp_cost[skill.id] -= skill.sp_cost * cost_rate / 100
actor.skill_sp_cost[skill.id] = actor.skill_sp_cost[skill.id].truncate
# SP消費が0以下はありえない
if actor.skill_sp_cost[skill.id] < 0
actor.skill_sp_cost[skill.id] = 0
end
end
# 命中率上昇 = 有効
if SKILL_HIT_UP
hit = S_HIT[skill.id]
hit_rate = ((hit != nil and hit[actor.id] != nil) ? hit[actor.id] : HIT_RATE)
actor.skill_hit[skill.id] += skill.hit * hit_rate / 100
actor.skill_hit[skill.id] = actor.skill_hit[skill.id].truncate
# 100以上はありえない
if actor.skill_hit[skill.id] > 100
actor.skill_hit[skill.id] = 100
end
end
end
end
end
#--------------------------------------------------------------------------
# ● 再カウント
#--------------------------------------------------------------------------
def skill_use_recount(actor, skill)
if actor.skill_up
actor.skill_level[skill.id] -= 1
# 威力を再計算
if SKILL_MIGHT_UP
actor.skill_power[skill.id] = skill.power
might = S_MIGHT[skill.id]
might_rate = ((might != nil and might[actor.id] != nil) ? might[actor.id] : MIGHT_RATE)
for i in 1...actor.skill_level[skill.id]
actor.skill_power[skill.id] += skill.power * might_rate / 100
actor.skill_power[skill.id] = actor.skill_power[skill.id].truncate
end
end
# SP消費再計算
if SP_COST_DOWN
actor.skill_sp_cost[skill.id] = skill.sp_cost
cost = S_COST[skill.id]
cost_rate = ((cost != nil and cost[actor.id] != nil) ? cost[actor.id] : COST_RATE)
for i in 1...actor.skill_level[skill.id]
actor.skill_sp_cost[skill.id] -= skill.sp_cost * cost_rate / 100
actor.skill_sp_cost[skill.id] = actor.skill_sp_cost[skill.id].truncate
end
# SP消費が0以下はありえない
if actor.skill_sp_cost[skill.id] < 0
actor.skill_sp_cost[skill.id] = 0
end
end
# 命中率再計算
if SKILL_HIT_UP
actor.skill_hit[skill.id] = skill.hit
hit = S_HIT[skill.id]
hit_rate = ((hit != nil and hit[actor.id] != nil) ? hit[actor.id] : HIT_RATE)
for i in 1...actor.skill_level[skill.id]
actor.skill_hit[skill.id] += skill.hit * hit_rate / 100
actor.skill_hit[skill.id] = actor.skill_hit[skill.id].truncate
end
# 100以上はありえない
if actor.skill_hit[skill.id] > 100
actor.skill_hit[skill.id] = 100
end
end
actor.skill_up = false
end
actor.skill_use[skill.id] -= 1
end
end
#==============================================================================
# スキル成長によるアニメーション変化
#==============================================================================
class Scene_Battle
include Skill_updata
#--------------------------------------------------------------------------
# ● フレーム更新 (メインフェーズステップ 4 : 対象側アニメーション)
#--------------------------------------------------------------------------
alias update_phase4_step4_skillup update_phase4_step4
def update_phase4_step4
update_phase4_step4_skillup
if @active_battler.is_a?(Game_Actor) and USE_S_ANIME
s_anime = S_ANIME[@skill.id]
# 設定がないなら無視
if s_anime != nil and s_anime[@active_battler.id] != nil
s_anime_set = s_anime[@active_battler.id]
for i in 0...s_anime_set.size
s_anime_def = s_anime_set[i]
# 規定レベル以上
if @active_battler.skill_level[@skill.id] >= s_anime_def[0]
# 対象側アニメーション
for target in @target_battlers
target.animation_id = s_anime_def[1]
end
end
end
end
end
end
end
#==============================================================================
# 以下、レベルアップ表示部分（レベルアップ表示がいらないなら消してもOK）
#==============================================================================
class Scene_Battle
include Skill_updata
if SHOW_SKILL_LV_UP
#--------------------------------------------------------------------------
# ● フレーム更新 (メインフェーズステップ 2 : アクション開始)
#--------------------------------------------------------------------------
alias update_phase4_step2_skillup update_phase4_step2
def update_phase4_step2
if @active_battler.is_a?(Game_Actor)
@active_battler.skill_up = false
end
@skillup = false
update_phase4_step2_skillup # 原物
end
#--------------------------------------------------------------------------
# ● フレーム更新 (メインフェーズステップ 3 : 行動側アニメーション)
#--------------------------------------------------------------------------
alias update_phase4_step3_skillup update_phase4_step3
def update_phase4_step3
if @active_battler.is_a?(Game_Actor) and @active_battler.skill_up != false
@skillup = true
@skill_up_window = Window_Skillup.new(@active_battler)
if SKILLUP_SE != nil
Audio.se_play("Audio/SE/" + SKILLUP_SE)
sleep(0.1)
end
end
update_phase4_step3_skillup
end
#--------------------------------------------------------------------------
# ● フレーム更新 (メインフェーズステップ 5 : ダメージ表示)
#--------------------------------------------------------------------------
alias update_phase4_step5_skillup update_phase4_step5
def update_phase4_step5
if @active_battler.is_a?(Game_Actor) and @skillup
@skill_up_window.dispose
@active_battler.skill_up = false
@skillup = false
end
update_phase4_step5_skillup # 原物
end
#--------------------------------------------------------------------------
# ● フレーム更新
#--------------------------------------------------------------------------
alias update_skillup update
def update
if @active_battler.is_a?(Game_Actor) and @active_battler.skill_up and @skillup
@skill_up_window.contents_opacity -= 4
end
update_skillup # 原物
end
end # if SHOW_SKILL_LV_UP
end
class Window_Skillup < Window_Base
#--------------------------------------------------------------------------
# ● オブジェクト初期化
# actor : アクター
#--------------------------------------------------------------------------
def initialize(actor)
super(actor.screen_x-140, 260, 250, 64)
self.contents = Bitmap.new(width - 32, height - 32)
self.opacity = 0
self.contents.font.color = Color.new(60, 118, 211)
self.contents.draw_text(80, 0, 150, 32, "忍术升级!")
end
end
#==============================================================================
# 以下、再定義部分を含む（SP消費減少の機能がいらないなら消してもOK）
#==============================================================================
class Window_Skill < Window_Selectable
#--------------------------------------------------------------------------
# ● 項目の描画
# index : 項目番号
#--------------------------------------------------------------------------
def draw_item(index)
skill = @data[index]
if @actor.skill_can_use?(skill.id)
self.contents.font.color = normal_color
else
self.contents.font.color = disabled_color
end
x = 4 + index % 2 * (288 + 32)
y = index / 2 * 32
rect = Rect.new(x, y, self.width / @column_max - 32, 32)
self.contents.fill_rect(rect, Color.new(0, 0, 0, 0))
bitmap = RPG::Cache.icon(skill.icon_name)
opacity = self.contents.font.color == normal_color ? 255 : 128
self.contents.blt(x, y + 4, bitmap, Rect.new(0, 0, 24, 24), opacity)
#-修正-----
@actor.skill_level[skill.id] = 0 if @actor.skill_level[skill.id] == nil
name_level = skill.name + "（" + @actor.skill_level[skill.id].to_s + "）"
self.contents.draw_text(x + 28, y, 204, 32, name_level, 0)
@actor.skill_sp_cost[skill.id] = skill.sp_cost if @actor.skill_sp_cost[skill.id] == nil
self.contents.draw_text(x + 232, y, 48, 32, @actor.skill_sp_cost[skill.id].to_s, 2)
#----------
end
end
class Scene_Skill
#--------------------------------------------------------------------------
# ● フレーム更新 (ターゲットウィンドウがアクティブの場合)
#--------------------------------------------------------------------------
def update_target
# B ボタンが押された場合
if Input.trigger?(Input::B)
# キャンセル SE を演奏
$game_system.se_play($data_system.cancel_se)
# ターゲットウィンドウを消去
@skill_window.active = true
@target_window.visible = false
@target_window.active = false
return
end
# C ボタンが押された場合
if Input.trigger?(Input::C)
# SP 切れなどで使用できなくなった場合
unless @actor.skill_can_use?(@skill.id)
# ブザー SE を演奏
$game_system.se_play($data_system.buzzer_se)
return
end
# ターゲットが全体の場合
if @target_window.index == -1
# パーティ全体にスキルの使用効果を適用
used = false
for i in $game_party.actors
used |= i.skill_effect(@actor, @skill)
end
end
# ターゲットが使用者の場合
if @target_window.index <= -2
# ターゲットのアクターにスキルの使用効果を適用
target = $game_party.actors[@target_window.index + 10]
used = target.skill_effect(@actor, @skill)
end
# ターゲットが単体の場合
if @target_window.index >= 0
# ターゲットのアクターにスキルの使用効果を適用
target = $game_party.actors[@target_window.index]
used = target.skill_effect(@actor, @skill)
end
# スキルを使った場合
if used
# スキルの使用時 SE を演奏
$game_system.se_play(@skill.menu_se)
#-----修正------------------------------------------------------
@actor.skill_sp_cost[@skill.id] = @skill.sp_cost if @actor.skill_sp_cost[@skill.id] == nil
# SP 消費
@actor.sp -= @actor.skill_sp_cost[@skill.id]
#---------------------------------------------------------------
# 各ウィンドウの内容を再作成
@status_window.refresh
@skill_window.refresh
@target_window.refresh
# 全滅の場合
if $game_party.all_dead?
# ゲームオーバー画面に切り替え
$scene = Scene_Gameover.new
return
end
# コモンイベント ID が有効の場合
if @skill.common_event_id > 0
# コモンイベント呼び出し予約
$game_temp.common_event_id = @skill.common_event_id
# マップ画面に切り替え
$scene = Scene_Map.new
return
end
end
# スキルを使わなかった場合
unless used
# ブザー SE を演奏
$game_system.se_play($data_system.buzzer_se)
end
return
end
end
end
class Scene_Battle
include Skill_updata
#--------------------------------------------------------------------------
# ● スキルアクション結果作成
#--------------------------------------------------------------------------
alias make_skill_action_result_skill_update make_skill_action_result
def make_skill_action_result
make_skill_action_result_skill_update
# SP 消費
if SP_COST_DOWN and @active_battler.is_a?(Game_Actor)
@active_battler.sp += @skill.sp_cost
@active_battler.sp -= @active_battler.skill_sp_cost[@skill.id]
end
end
end
class Game_Battler
#--------------------------------------------------------------------------
# ● スキルの使用可能判定
# skill_id : スキル ID
#--------------------------------------------------------------------------
alias skill_update_can_use? skill_can_use?
def skill_can_use?(skill_id)
ret = skill_update_can_use?(skill_id)
if !ret and SP_COST_DOWN
# SP が足りない場合は使用不可となった？
if $data_skills[skill_id].sp_cost > self.sp
if self.is_a?(Game_Actor)
skill_sp_cost = self.skill_sp_cost[skill_id]
if skill_sp_cost < self.sp
ret = true
end
end
end
end
return ret
end
end
#==============================================================================
# イベントスクリプト操作
#==============================================================================
class Interpreter
include Skill_updata
#--------------------------------------------------------------------------
# ● スキルレベル設定（レベルセット）
# actor_id : アクターID
# skill_id : スキルID
# level : 設定レベル
#--------------------------------------------------------------------------
def set_skill_level(actor_id, skill_id, level)
actor = $game_actors[actor_id]
skill = $data_skills[skill_id]
# リミット取得
limit = S_LEVEL[skill_id]
s_limit = ( (limit != nil and limit[actor.id] != nil) ? limit[actor.id] : LEVEL_LIMIT)
if level > s_limit or level < 0
return
end
# レベル
actor.skill_level[skill.id] = level
# 使用回数
use_list = actor.skill_list[skill.id]
actor.skill_use[skill.id] = use_list[level]
# 威力を再計算
if SKILL_MIGHT_UP
actor.skill_power[skill.id] = skill.power
might = S_MIGHT[skill.id]
might_rate = ((might != nil and might[actor.id] != nil) ? might[actor.id] : MIGHT_RATE)
for i in 0...level
actor.skill_power[skill.id] += skill.power * might_rate / 100
actor.skill_power[skill.id] = actor.skill_power[skill.id].truncate
end
end
# SP消費再計算
if SP_COST_DOWN
actor.skill_sp_cost[skill.id] = skill.sp_cost
cost = S_COST[skill.id]
cost_rate = ((cost != nil and cost[actor.id] != nil) ? cost[actor.id] : COST_RATE)
for i in 0...level
actor.skill_sp_cost[skill.id] -= skill.sp_cost * cost_rate / 100
actor.skill_sp_cost[skill.id] = actor.skill_sp_cost[skill.id].truncate
end
# SP消費が0以下はありえない
if actor.skill_sp_cost[skill.id] < 0
actor.skill_sp_cost[skill.id] = 0
end
end
# 命中率再計算
if SKILL_HIT_UP
actor.skill_hit[skill.id] = skill.hit
hit = S_HIT[skill.id]
hit_rate = ((hit != nil and hit[actor.id] != nil) ? hit[actor.id] : HIT_RATE)
for i in 0...level
actor.skill_hit[skill.id] += skill.hit * hit_rate / 100
actor.skill_hit[skill.id] = actor.skill_hit[skill.id].truncate
end
# 100以上はありえない
if actor.skill_hit[skill.id] > 100
actor.skill_hit[skill.id] = 100
end
end
end
#--------------------------------------------------------------------------
# ● スキルレベル設定（レベルアップ）
# actor_id : アクターID
# skill_id : スキルID
#--------------------------------------------------------------------------
def skill_level_up(actor_id, skill_id)
actor = $game_actors[actor_id]
set_skill_level(actor_id, skill_id, actor.skill_level[skill_id]+1)
end
#--------------------------------------------------------------------------
# ● スキルレベル設定（レベルダウン）
# actor_id : アクターID
# skill_id : スキルID
#--------------------------------------------------------------------------
def skill_level_down(actor_id, skill_id)
actor = $game_actors[actor_id]
set_skill_level(actor_id, skill_id, actor.skill_level[skill_id]-1)
end
end
#==============================================================================
#==============================================================================

复制代码