输入法名称输入

enghao_lim · 发表于 2011-4-4 14:56:48

加入我们，或者，欢迎回来。

您需要登录才可以下载或查看，没有帐号？注册会员

x

本帖最后由 enghao_lim 于 2011-4-4 15:02 编辑

首发网址：http://www.our-story.tk/read.php?tid=76

其实就是把原有的输入名称方式改为使用拼音输入发输入，
大大的增加了可以输入的文字，相信许多超越自由化的游戏都可以使用。
如类似diablo的自由命名方式，类似仙剑四的武器取名都可以使用。
虽然目前的字库只有20000++的文字，不过只要有人可以提供帮助我愿意完善。
其余的说明都在脚本里，自己看吧。

使用方法：将脚本贴在main之前，然后用事件触发输入姓名处理。

晒晒几张截图：
设置方法：

效果图：

外带的中文字库：

CnWordCabin.rar (49.47 KB, 下载次数: 1791)

输入法名称输入脚本：

=begin
【输入法名称输入】 by enghao_lim（小lim）
Blog：http://www.lim-space.tk/
论坛：http://www.our-story.tk/
=================================================
01. 增加姓名可以输入的可能性，采用汉语拼音方式，让华语和英语更好的结合。
02. 采用了字库的配合，有兴趣者既可扩展该字库，相信必能更加完善。
03. 目前之真对单字开发，不支持词语输入
04. 不支持多音多字，比如：重，如在chong里搜索不到，请重试zhong。
05. 此脚本需要与修改后的全键盘脚本一起使用。
06. 此脚本还需要外带字库，默认名字为：CnWordCabin.fonc。
记得将字库放在工程文件夹底下。
=================================================
*PS: 由于次脚本所用的文字库非常乱起八糟，具体只是根据阴阳上去来排列，
所以有些常用字可能还被排在了后头，比如说“是”。
如有谁愿意继续开发该字库或者帮忙重新排列，请联络我。
稍微小小的补充，次字库包含超过两万个中文字。
=end
module LIM_INPUT
# 代替空格的符号设置
Space_replace = "<>"
end
class Window_Input < Window_Base
#------------------------------
# 【初始化】
#------------------------------
def initialize
super(0,128,640,96)
self.contents = Bitmap.new(width-32,height-32)
self.back_opacity = self.opacity = 0
@old_text = nil
@text_length = 0
end
#------------------------------
# 【显示文字】
#------------------------------
def set_text(*arg)
# 获取显示的文字
if (arg[0].is_a?(Integer))
x = arg[0]
c = 6
text = arg[1]
else
x = 0
c = 0
text = arg[0]
end
x += 48
# 开始显示
if @old_text != text
self.contents.clear
self.contents.font.color = text_color(c)
self.contents.draw_text(x,16,width-32,32,text.gsub(/ /){LIM_INPUT::Space_replace})
@old_text = text
@text_length = self.contents.text_size(text.gsub(/ /){LIM_INPUT::Space_replace}).width
end
end
#------------------------------
# 【获取文字的长度】
#------------------------------
def text_length
return @text_length
end
end
class Window_Word < Window_Base
#------------------------------
# 【初始化】
#------------------------------
def initialize
super(0,224,640,96)
self.contents = Bitmap.new(width-32,height-32)
@old_word = []
end
#------------------------------
# 【显示文字选项】
#------------------------------
def set_text(word_array)
if @old_word != word_array
x = 0
bitmap = Bitmap.new(width-32,height-32)
for i in 0...word_array.size
k = (i+1)%10
bitmap.draw_text(x,0,22,32,k.to_s,1)
bitmap.draw_text(x,32,22,32,word_array[i],1)
x += 22
x += 22 if (i != word_array.size - 1)
end
self.contents.clear
_x = (width-32-x)/2
self.contents.blt(_x,0,bitmap,Rect.new(0,0,x,64))
@old_word = word_array
end
end
end
class Window_Name < Window_Base
#------------------------------
# 【初始化】
#------------------------------
def initialize(actor)
super(0,96,640,128)
self.contents = Bitmap.new(width-32,height-32)
@actor = actor
refresh
end
#------------------------------
# 【显示图片】
#------------------------------
def refresh
self.contents.draw_text(4,0,width-32,32,"请输入新的名字：")
draw_actor_graphic(@actor,24,88)
end
end
class Scene_Name
#------------------------------
# 【主循环】
#------------------------------
def main
# 获取角色与各种变量设置
@actor = $game_actors[$game_temp.name_actor_id]
@max_word = $game_temp.name_max_char
@inputed = @actor.name
@now_input = ""
@old_now_input = ""
@old_key = ""
@now_index = 0
@wait_count = 0
# 读取字库
word_cabin = File.open("CnWordCabin.fonc","rb")
@cn_key = Marshal.load(word_cabin)
@cn_word = Marshal.load(word_cabin)
# 生成各种窗口
@window_name = Window_Name.new(@actor)
@window_input = Window_Input.new
@window_input2 = Window_Input.new
@window_word = Window_Word.new
@window_word.visible = false
@window_count = Window_Help.new
@window_count.y = 416
@window_count.back_opacity = @window_count.opacity = 0
reset_text
@command_help = Window_Base.new(64,128,512,64)
@command_help.contents = Bitmap.new(480,32)
@command_help.contents.draw_text(0,0,480,32,"确定输入完毕？",1)
@command_help.visible = false
@command_exit = Window_Command.new(160,["是","否"])
@command_exit.x = 240
@command_exit.y = 196
@command_exit.active = @command_exit.visible = false
Graphics.transition(20)
# 开始循环
loop do
Graphics.update
Input.update
update
break if $scene != self
end
# 释放
@window_name.dispose
@window_input.dispose
@window_input2.dispose
@window_word.dispose
@window_count.dispose
@command_help.dispose
@command_exit.dispose
end
#------------------------------
# 【循环刷新】
#------------------------------
def update
# 各种刷新
@window_name.update
@window_input.update
@window_input2.update
@window_word.update
@window_count.update
@command_help.update
@command_exit.update
# 是否正在选取文字
if @window_word.visible and Key.trigger?(0x31) # Number 1
choose_the_word(1)
Key.get_string
elsif @window_word.visible and Key.trigger?(0x32) # Number 2
choose_the_word(2)
Key.get_string
elsif @window_word.visible and Key.trigger?(0x33) # Number 3
choose_the_word(3)
Key.get_string
elsif @window_word.visible and Key.trigger?(0x34) # Number 4
choose_the_word(4)
Key.get_string
elsif @window_word.visible and Key.trigger?(0x35) # Number 5
choose_the_word(5)
Key.get_string
elsif @window_word.visible and Key.trigger?(0x36) # Number 6
choose_the_word(6)
Key.get_string
elsif @window_word.visible and Key.trigger?(0x37) # Number 7
choose_the_word(7)
Key.get_string
elsif @window_word.visible and Key.trigger?(0x38) # Number 8
choose_the_word(8)
Key.get_string
elsif @window_word.visible and Key.trigger?(0x39) # Number 9
choose_the_word(9)
Key.get_string
elsif @window_word.visible and Key.trigger?(0x30) # Number 0
choose_the_word(10)
Key.get_string
elsif @window_word.visible and Key.trigger?(187) # Key +
if @now_index + 10 < @cn_word[@now_input].size
Audio.se_play("Audio/SE/046-Book01")
@now_index += 10
show_match_word(@now_input)
else
$game_system.se_play($data_system.buzzer_se)
end
Key.get_string
elsif @window_word.visible and Key.trigger?(189) # Key -
if @now_index - 10 >= 0
Audio.se_play("Audio/SE/046-Book01")
@now_index -= 10
show_match_word(@now_input)
else
$game_system.se_play($data_system.buzzer_se)
end
Key.get_string
@wait_count = 4
end
# 文字输入刷新
@now_input += Key.get_string
@window_input2.set_text(@window_input.text_length,@now_input)
# 出声音，可以无视……
if @now_input != @old_now_input
$game_system.se_play($data_system.cursor_se)
@old_now_input = @now_input
end
# 判断匹配拼音
if @cn_key.include?(@now_input)
show_match_word(@now_input)
@window_word.visible = true
else
@window_word.visible = false
end
# 各种情况刷新
if @wait_count > 0
@wait_count -= 1
return
elsif @command_exit.active
command_exit_update
elsif Key.trigger?(13) # Enter
enter_trigger_update
elsif Key.trigger?(8) or Key.press?(8) # Backspace
return if (@now_input == "" and @inputed == "")
backspace_trigger_update
end
end
#------------------------------
# 【询问退出刷新】
#------------------------------
def command_exit_update
if Input.trigger?(Input::C)
case @command_exit.index
when 0
$game_system.se_play($data_system.decision_se)
@actor.name = @inputed
$scene = Scene_Map.new
when 1
command_exit_activated?(false)
$game_system.se_play($data_system.cancel_se)
end
end
if Input.trigger?(Input::B)
command_exit_activated?(false)
$game_system.se_play($data_system.cancel_se)
end
end
#------------------------------
# 【确定输入的文字】
#------------------------------
def enter_trigger_update
# 还在输入的情况
if @now_input != ""
temp = @now_input.scan(/./)
for char in temp
if @inputed.scan(/./).size >= @max_word
$game_system.se_play($data_system.buzzer_se)
break
end
@inputed += char
end
@now_input = ""
reset_text
# 没有输入的情况
else
$game_system.se_play($data_system.decision_se)
command_exit_activated?(true)
end
end
#------------------------------
# 【确定输入的文字】
#------------------------------
def backspace_trigger_update
if @now_input != ""
temp = @now_input.scan(/./)
@now_input = ""
for i in 0...temp.size-1
@now_input += temp[i]
end
else
temp = @inputed.scan(/./)
@inputed = ""
for i in 0...temp.size-1
@inputed += temp[i]
end
end
$game_system.se_play($data_system.cursor_se)
@wait_count = 2
reset_text
end
#------------------------------
# 【重新显示文字】
#------------------------------
def reset_text
@window_input.set_text(@inputed)
@window_input2.set_text(@window_input.text_length,@now_input)
@window_count.set_text("还有 #{@[email protected](/./).size} 字可以输入",2)
end
#------------------------------
# 【匹配文字显示】
#------------------------------
def show_match_word(key)
if @old_key != key
@now_index = 0
@old_key = key
end
max = [@cn_word[key].size-@now_index,10].min
word_array = []
for i in 0...max
k = i + @now_index
word_array.push(@cn_word[key][k])
end
@window_word.set_text(word_array)
end
#------------------------------
# 【选择的文字】
#------------------------------
def choose_the_word(n)
n -= 1
char = @cn_word[@now_input][@now_index+n]
if @inputed.scan(/./).size == @max_word or char.nil?
$game_system.se_play($data_system.buzzer_se)
return
end
$game_system.se_play($data_system.decision_se)
@inputed += char
@now_input = ""
reset_text
end
#------------------------------
# 【激活退出选项】
#------------------------------
def command_exit_activated?(bool)
@window_name.visible = !bool
@window_input.visible = !bool
@window_input2.visible = !bool
@window_count.visible = !bool
@command_help.visible = bool
@command_exit.visible = bool
@command_exit.active = bool
end
end

复制代码

修改后的全键盘脚本（来自engshun）：

module Key
@key_code = {
# =============================
"BACK"=> 0x08,
"TAB"=> 0x09,
"SHIFT"=> 0x10,
"ALT"=> 0x12,
"CAP"=> 0x14,
"ESC"=> 0x1B,
"SPACE"=> 0x20,
"LEFT"=> 0x25,
"UP"=> 0x26,
"RIGHT"=> 0x27,
"DOWN"=> 0x28,
"ENTER" => 13,
"LCTRL" => 0xA2,
"RCTRL" => 0xA3,
"LALT" => 0xA4,
"RALT" => 0xA5,
"SPACE" => 0x20,
"DEL" => 0x2E,
# =============================
"A" => 0x41,
"B" => 0x42,
"C" => 0x43,
"D" => 0x44,
"E" => 0x45,
"F" => 0x46,
"G" => 0x47,
"H" => 0x48,
"I" => 0x49,
"J" => 0x4A,
"K" => 0x4B,
"L" => 0x4C,
"M" => 0x4D,
"N" => 0x4E,
"O" => 0x4F,
"P" => 0x50,
"Q" => 0x51,
"R" => 0x52,
"S" => 0x53,
"T" => 0x54,
"U" => 0x55,
"V" => 0x56,
"W" => 0x57,
"X" => 0x58,
"Y" => 0x59,
"Z" => 0x5A,
# =============================
"F1" => 0x70,
"F2" => 0x71,
"F3" => 0x72,
"F4" => 0x73,
"F5" => 0x74,
"F6" => 0x75,
"F7" => 0x76,
"F8" => 0x77,
"F9" => 0x78,
"F10" => 0x79,
"F11" => 0x7A,
"F12" => 0x7B,
# =============================
"0" => 0x30,
"1" => 0x31,
"2" => 0x32,
"3" => 0x33,
"4" => 0x34,
"5" => 0x35,
"6" => 0x36,
"7" => 0x37,
"8" => 0x38,
"9" => 0x39,
# =============================
";" => 186,
"=" => 187,
"," => 188,
"-" => 189,
"." => 190,
"/" => 191,
"[" => 219,
"\\" => 220,
"]" => 221,
"'" => 222,
# =============================
"N0" => 0x60,
"N1" => 0x61,
"N2" => 0x62,
"N3" => 0x63,
"N4" => 0x64,
"N5" => 0x65,
"N6" => 0x66,
"N7" => 0x67,
"N8" => 0x68,
"N9" => 0x69
}
@upcase = {
48 => ")",
49 => "!",
50 => "@",
51 => "#",
52 => "$",
53 => "%",
54 => "^",
55 => "&",
56 => "*",
57 => "(",
186 => ":",
187 => "+",
188 => "<",
189 => "_",
190 => ">",
191 => "?",
219 => "{",
220 => "|",
221 => "}",
222 => '"'
}
module_function
@R_Key_Hash = {}
@trigger = {}
@R_Key_Repeat = {}
@press_key = [0]
GetKeyState = Win32API.new("user32","GetAsyncKeyState",['I'],'I')
def update
@key_code.each_value do |i|
result = GetKeyState.call(i)
if @R_Key_Hash[i] == 1 and result != 0
@trigger[i] = false
next
end
if result != 0
@R_Key_Hash[i] = 1
@trigger[i] = true
next
else
@R_Key_Hash[i] = 0
@trigger[i] = false
next
end
end
if @press_key[0] > 0
@press_key[0] -= 1
unlash if @press_key == 0
end
end
def press?(rkey)
return GetKeyState.call(rkey) != 0
end
def repeat?(rkey)
result = GetKeyState.call(rkey)
if result != 0
if @R_Key_Repeat[rkey].nil?
@R_Key_Repeat[rkey] = 0
return true
end
@R_Key_Repeat[rkey] += 1
else
@R_Key_Repeat[rkey] = nil
@R_Key_Hash[rkey] = 0
end
if !@R_Key_Repeat[rkey].nil? and @R_Key_Repeat[rkey] > 10
@R_Key_Repeat[rkey] = 6
return true
else
return false
end
end
def trigger?(rkey)
return @trigger[rkey]
end
def [](key)
return @key_code[key]
end
def caps?
gks = Win32API.new("user32", "GetKeyState", 'i', 'i')
result = gks.call(0x14)
return result[0] == 1
end
#===================================================================
def get_string
n = nil
str = nil
@key_code.each_value do |i|
n = i if repeat?(i) and i != 16 and i != 13 and i != 8
end
if n != nil
str = @key_code.index(n)
unless self.caps?
str = str.downcase unless Key.press?(16)
else
str = str.downcase if Key.press?(16)
end
str = nil if str.scan(/./).size != 1
if self.press?(16) and @upcase.include?(n)
str = @upcase[n]
end
str = (n - 96).to_s if n.between?(96,105)
end
str = " " if n == 0x20
str = " " if n == 0x09
return str.to_s
end
#===================================================================
end
module Input
@self_update = method('update') if @self_update.nil?
def self.update
@self_update.call
Key.update
end
end

复制代码

一枚菜鸡大队长 · 发表于 2023-7-17 14:27:32

980582939 发表于 2011-5-12 12:16
外带的中文字库要放哪？？

放在游戏根目录就可以了

enghao_lim · 发表于 2022-8-2 12:54:30

陈大帅帅帅哥发表于 2022-8-1 20:08
想请教一下怎么编辑字库

自行编辑转档后的字库吧。

字库 => txt 脚本

word_cabin = File.open("CnWordCabin.fonc","rb")
@cn_key = Marshal.load(word_cabin)
@cn_word = Marshal.load(word_cabin)
f = File.open("list.txt", "w")
@cn_word.each do |pair|
key = pair[0]
f << key
f << "\n"
list = pair[1]
list.each do |str|
f << str
f << ","
end
f << "\n"
end
f.close()

复制代码

txt =>字库脚本

src = File.open("list.txt","rb")
txt = src.read
line = txt.split(/\r?\n/)
key = []
hash = {}
for i in 0...line.count
if (i % 2 == 1)
next
end
py = line[i]
list = line[i+1].split(",")
list.delete("")
key.push(py)
hash[key] = list
end
n = File.new("NewCnWordCabin.fonc", "w")
Marshal.dump(key, n)
Marshal.dump(hash, n)
n.close()

复制代码

陈大帅帅帅哥 · 发表于 2022-8-1 20:08:02

想请教一下怎么编辑字库

口冖风清扬冖口 · 发表于 2021-11-27 01:29:16

enghao_lim 发表于 2021-11-26 23:19
其实我估计只有最后206行开始和鼠标脚本冲突，冲突的原因估计是两个用了同种覆盖input update的方法，当 ...

很厉害如果能做网游这个输入法会用上

enghao_lim · 发表于 2021-11-26 23:19:38

口冖风清扬冖口发表于 2021-11-26 18:55
这输入法挺厉害，我只是输一个名字，我还是直接改原来的输入脚本吧，鼠标脚本我不能不要 ...

其实我估计只有最后206行开始和鼠标脚本冲突，冲突的原因估计是两个用了同种覆盖input update的方法，当然我没看过脚本所以不确定，猜的。

口冖风清扬冖口 · 发表于 2021-11-26 18:55:30

enghao_lim 发表于 2021-11-26 16:11
都是重定义input的脚本，冲突可能性很大。

这输入法挺厉害，我只是输一个名字，我还是直接改原来的输入脚本吧，鼠标脚本我不能不要

口冖风清扬冖口 · 发表于 2021-11-26 18:10:29

enghao_lim 发表于 2021-11-26 16:11
都是重定义input的脚本，冲突可能性很大。

很难受，鼠标都用了很久很久了，但是还是想要个输入法输入

plain666 · 发表于 2021-11-26 17:53:39

功能太强大了。

enghao_lim · 发表于 2021-11-26 16:11:43

口冖风清扬冖口发表于 2021-11-26 05:48
第二片脚本用了之后鼠标不能用了

都是重定义input的脚本，冲突可能性很大。

口冖风清扬冖口 · 发表于 2021-11-26 05:48:39

第二片脚本用了之后鼠标不能用了

帐号		自动登录	找回密码
密码			注册会员

[原创发布] 输入法名称输入

加入我们，或者，欢迎回来。

点评

评分

评分

浏览过的版块

开拓者

极短25参与