全键盘脚本不能全屏

EngShun · 发表于 2010-11-16 16:43:46

加入我们，或者，欢迎回来。

您需要登录才可以下载或查看，没有帐号？注册会员

x

本帖最后由 EngShun 于 2010-11-16 17:32 编辑

我用了全键盘脚本后，竟然无法全屏，连自动全屏也不行。

补充一下，我用的是这个脚本：

=begin
脚本：【完美输入法修正】
功能：输入法。
说明: 直接用Type_Field创建输入域即可进行输入，在此可根据Type_Field域对象
的活动标记active来自定义刷新等，在Type_Field中需要自己处理特殊按键
的处理方法。具体不明白之处请参考范例工程。
作者：灼眼的夏娜
补充: 至于以前那个版本也许很多人都注意到那个烦人的问题了吧，按Enter和Tab那
些会出现不爽的声音，这个版本解决了那个问题，并简化添加了Type_Field类
来方便创建输入域。
=end
#==============================================================================
# ■ RInput
#------------------------------------------------------------------------------
# 　全键盘处理的模块。
#==============================================================================
module RInput
#--------------------------------------------------------------------------
# ● 常量定义
#--------------------------------------------------------------------------
ENTER = 0x0D
SPACE = 0x20
UP = 0x26
DOWN = 0x28
LEFT = 0x25
RIGHT = 0x27
TAB = 0x09
LCTRL = 0xA2
LALT = 0xA4
ESC = 0x1B
#--------------------------------------------------------------------------
# ● 临时Hash
#--------------------------------------------------------------------------
@R_Key_Hash = {}
@R_Key_Repeat = {}
#--------------------------------------------------------------------------
# ● 唯一API
#--------------------------------------------------------------------------
GetKeyState = Win32API.new("user32","GetAsyncKeyState",['I'],'I')
#--------------------------------------------------------------------------
# ● 单键处理
#--------------------------------------------------------------------------
def self.trigger?(rkey)
result = GetKeyState.call(rkey)
if @R_Key_Hash[rkey] == 1 and result != 0
return false
end
if result != 0
@R_Key_Hash[rkey] = 1
return true
else
@R_Key_Hash[rkey] = 0
return false
end
end
end
#==============================================================================
# ■ EasyConv
#------------------------------------------------------------------------------
# 　转码模块。
#==============================================================================
module EasyConv
#--------------------------------------------------------------------------
# ● 常量定义
#--------------------------------------------------------------------------
CP_ACP = 0
CP_UTF8 = 65001
#--------------------------------------------------------------------------
# ● 模块函数
#--------------------------------------------------------------------------
module_function
#--------------------------------------------------------------------------
# ● 转码
#--------------------------------------------------------------------------
def s2u(text)
m2w = Win32API.new('kernel32', 'MultiByteToWideChar', 'ilpipi', 'i')
w2m = Win32API.new('kernel32', 'WideCharToMultiByte', 'ilpipipp', 'i')
len = m2w.call(CP_ACP, 0, text, -1, nil, 0)
buf = "\0" * (len*2)
m2w.call(CP_ACP, 0, text, -1, buf, buf.size/2)
len = w2m.call(CP_UTF8, 0, buf, -1, nil, 0, nil, nil)
ret = "\0" * len
w2m.call(CP_UTF8, 0, buf, -1, ret, ret.size, nil, nil)
ret[-1] = ""
return ret
end
#--------------------------------------------------------------------------
# ● 转码
#--------------------------------------------------------------------------
def u2s(text)
m2w = Win32API.new('kernel32', 'MultiByteToWideChar', 'ilpipi', 'i')
w2m = Win32API.new('kernel32', 'WideCharToMultiByte', 'ilpipipp', 'i')
len = m2w.call(CP_UTF8, 0, text, -1, nil, 0)
buf = "\0" * (len*2)
m2w.call(CP_UTF8, 0, text, -1, buf, buf.size/2)
len = w2m.call(CP_ACP, 0, buf, -1, nil, 0, nil, nil)
ret = "\0" * len
w2m.call(CP_ACP, 0, buf, -1, ret, ret.size, nil, nil)
return ret
end
end
#==============================================================================
# ■ TypeAPI
#------------------------------------------------------------------------------
# 　输入法相关API模块。
#==============================================================================
module TypeAPI
#--------------------------------------------------------------------------
# ● API定义
#--------------------------------------------------------------------------
GPPS = Win32API.new("kernel32","GetPrivateProfileString",'pppplp','l')
FindWindow = Win32API.new("user32", "FindWindow", 'pp', 'i')
CreateWindow = Win32API.new("NetGame","CreatWnd",'l','l')
SetHK = Win32API.new("NetGame","SetHK",'v','v')
GetText = Win32API.new("NetGame","GetWndText",'l','p')
SetFocus = Win32API.new("user32","SetFocus",'l','l')
IfBack = Win32API.new("NetGame","If_Back",'v','i')
StartType = Win32API.new("NetGame","StartType",'v','v')
EndType = Win32API.new("NetGame","EndType",'v','v')
GetKeyInfos = Win32API.new("NetGame","GetKeyInfo",'v','i')
#--------------------------------------------------------------------------
# ● 模块函数
#--------------------------------------------------------------------------
module_function
#--------------------------------------------------------------------------
# ● 获取参数
#--------------------------------------------------------------------------
def getParam
val = "\0" * 256
GPPS.call("Game","Title","",val,256,"./Game.ini")
val.delete!("\0")
return val
end
#--------------------------------------------------------------------------
# ● 获取窗口
#--------------------------------------------------------------------------
def findWindow
return FindWindow.call("RGSS Player",self.getParam)
end
#--------------------------------------------------------------------------
# ● 创建窗口
#--------------------------------------------------------------------------
def createWindow(hwnd)
return CreateWindow.call(hwnd)
end
#--------------------------------------------------------------------------
# ● 设置HK
#--------------------------------------------------------------------------
def setHK
SetHK.call
end
#--------------------------------------------------------------------------
# ● 获取文字
#--------------------------------------------------------------------------
def getText
return EasyConv.s2u(GetText.call(@subhwnd))
end
#--------------------------------------------------------------------------
# ● 设置焦点
#--------------------------------------------------------------------------
def setFocus
SetFocus.call(@subhwnd)
end
#--------------------------------------------------------------------------
# ● 转换焦点
#--------------------------------------------------------------------------
def lostFocus
SetFocus.call(@hwnd)
end
#--------------------------------------------------------------------------
# ● 退格判定
#--------------------------------------------------------------------------
def ifBack
return IfBack.call
end
#--------------------------------------------------------------------------
# ● 开始输入
#--------------------------------------------------------------------------
def startType
StartType.call
end
#--------------------------------------------------------------------------
# ● 结束输入
#--------------------------------------------------------------------------
def endType
EndType.call
end
#--------------------------------------------------------------------------
# ● 输入中特殊按键处理
#--------------------------------------------------------------------------
def getKeyInfos
return GetKeyInfos.call
end
#--------------------------------------------------------------------------
# ● 获取句柄
#--------------------------------------------------------------------------
@hwnd = self.findWindow
@subhwnd = self.createWindow(@hwnd)
#--------------------------------------------------------------------------
# ● 设置HK应用
#--------------------------------------------------------------------------
self.setHK
end
#==============================================================================
# ■ Type_Field
#------------------------------------------------------------------------------
# 　处理输入域的类。
#==============================================================================
class Type_Field
#--------------------------------------------------------------------------
# ● 定义实例变量
#--------------------------------------------------------------------------
attr(:active)
#--------------------------------------------------------------------------
# ● 初始化
#--------------------------------------------------------------------------
def initialize(v,default_text = "",default_careth = nil,default_fonts = 16,\
default_fontc = Color.new(255,255,255),size = 8)
# active
@active = true
# 视口
rect = v.rect
@v = Viewport.new(rect.x,rect.y,rect.width,rect.height)
@v.z = 10000
@w = rect.width
@h = rect.height
# 属性
@caret_h = default_careth.nil? ? @h : [@h,default_careth].min
@caret_y = rect.y + (@h - @caret_h) / 2
@font_size = [default_fonts,@h].min
# 描绘contents
@cts = Sprite.new(@v)
@cts.bitmap = Bitmap.new(@w - 3,@h)
@cts.bitmap.font.size = @font_size
@cts.bitmap.font.color = default_fontc
# 辅助属性
@bk_count = 0
@text = []#default_text.scan(/./)
@max_size = size
@caret_pos = @text.size
@save_pos = @caret_pos
# 光标Caret
@v1 = Viewport.new(rect.x,@caret_y,@w + 3,@caret_h)
@v1.z = 99999
@caret_sp = Sprite.new(@v1)
@caret_bitmap = Bitmap.new(3,@caret_h)
@caret_bitmap.fill_rect(0,0,1,@caret_h,Color.new(0,0,0,255))
@caret_bitmap.fill_rect(1,0,1,@caret_h,Color.new(0,0,0))
@caret_bitmap.fill_rect(2,0,1,@caret_h,Color.new(120,120,120))
@caret_sp.bitmap = @caret_bitmap
@caret_sp.x = self.get_width(@text[0,@caret_pos].to_s) + 87
@caret_sp.y = 0
@caret_sp.visible = false
@caret_flash_count = 0
# 刷新
refresh
# 设置焦点
TypeAPI.setFocus
# 开始输入
TypeAPI.startType
@test = []
end
#--------------------------------------------------------------------------
# ● 设置活动标记
#--------------------------------------------------------------------------
def active=(value)
if value != true and value != false
return
end
@active = value
@caret_sp.visible = @active
end
#--------------------------------------------------------------------------
# ● 释放
#--------------------------------------------------------------------------
def dispose
@caret_bitmap.dispose
@caret_sp.bitmap.dispose
@caret_sp.dispose
@cts.bitmap.dispose
@cts.dispose
@v.dispose
@v1.dispose
TypeAPI.endType
end
#--------------------------------------------------------------------------
# ● 刷新
#--------------------------------------------------------------------------
def refresh
@cts.bitmap.clear
@cts.bitmap.draw_text(85,0,@w,@h,@text.to_s)
end
#--------------------------------------------------------------------------
# ● 获取文字
#--------------------------------------------------------------------------
def get_text
return @text.to_s
end
#--------------------------------------------------------------------------
# ● 取得字符宽度
#--------------------------------------------------------------------------
def get_width(str)
return @cts.bitmap.text_size(str).width
end
#--------------------------------------------------------------------------
# ● 更新
#--------------------------------------------------------------------------
def update
@caret_sp.visible = @active
# 非激活状态则返回
unless @active
return
end
# 获取按键信息
key_info = TypeAPI.getKeyInfos
case key_info
when 0x09 # Tab
# 按下 Tab 键的情况自己定义怎么处理
return
when 0x0d # Enter
# 按下 Enter 键的情况自己定义怎么处理
return
when 0x1B # Esc
# 按下 Esc 键的情况自己定义怎么处理
return
end
self.update_text
self.update_lrb
self.update_back
self.update_caret
end
#--------------------------------------------------------------------------
# ● 更新文字
#--------------------------------------------------------------------------
def update_text
# 文字刷新
TypeAPI.setFocus
text = TypeAPI.getText
if text != ""
for char in text.scan(/./)
if self.get_text.size <= @max_size
@text[@caret_pos,0] = char
@caret_pos += 1
else
break
end
end
refresh
end
end
#--------------------------------------------------------------------------
# ● 更新左右按键
#--------------------------------------------------------------------------
def update_lrb
if RInput.trigger?(RInput::LEFT) and @caret_pos > 0
@caret_pos -= 1
return
end
if RInput.trigger?(RInput::RIGHT) and @caret_pos < @text.size
@caret_pos += 1
return
end
end
#--------------------------------------------------------------------------
# ● 更新退格
#--------------------------------------------------------------------------
def update_back
# 前退格处理
@bk_count += TypeAPI.ifBack
if @bk_count > 0
@bk_count -= 1
if @caret_pos > 0
@text.delete_at(@caret_pos - 1);@caret_pos -= 1;refresh
end
end
end
#--------------------------------------------------------------------------
# ● 更新光标闪烁
#--------------------------------------------------------------------------
def update_caret
# 闪烁计时
@caret_flash_count += 1
if @caret_flash_count == 20
@caret_sp.visible = !@caret_sp.visible
@caret_flash_count = 0
end
# Caret位置刷新
if @save_pos != @caret_pos
@save_pos = @caret_pos
@caret_sp.x = self.get_width(@text[0,@save_pos].to_s) + 87
end
end
end

复制代码

(咦？这不是输入法脚本吗？)如果这样想你就错了，此脚本内有其中一部分是全键盘脚本。

帐号		自动登录	找回密码
密码			注册会员

[已经过期] 全键盘脚本不能全屏

加入我们，或者，欢迎回来。