不好意思 请教变更档案读取位置

timmyyayaya

以下是AVI拨放脚本，
原本读取影片的位置是游戏主文件夹，
不知道是否有人能帮我改成Graphics/Movies这个位置读取？

#==============================================================================
# ☆★☆ AVI播放器 ☆★☆
#------------------------------------------------------------------------------
# - FantasyDR
# - 2006.3.8
#------------------------------------------------------------------------------
# MSN: [email protected]
#------------------------------------------------------------------------------
# Note:
#
# 1.游戏必须使用游戏样板工程附带的RGSS102J.dll
#
# 2.在下方 PROJECT_NAME = 后面填写你的游戏工程名.
#
# 3.在游戏中,调用脚本事件播放你的视频文件,如果一行写不下可以在逗号后换行.
#
# $MP.play(movie_name, movie_length,
# skip, fullscr,
# x, y, width, height)
#
# 参数说明:
#
# movie_name : 视频文件名(*.avi),必须
# movie_length : 电影时间,单位是秒,必须
# skip : 是否可以按A键跳过,true/false,默认是true
# fullscr : 是否强制为全屏幕播放,true/false,默认是false
# x,y : 视频播放的左上角坐标,默认是0,0
# width,height : 视频的宽度,可以任意.默认是640,480
#
# 例如:
# $MP.play("logo.avi",13,false,true)
#==============================================================================
# ------------------------------------------------------------------------
# 高精度计时器 by FantasyDR
# ------------------------------------------------------------------------
# E-mail: [email protected]
# ------------------------------------------------------------------------
# 2005.10.18
# ------------------------------------------------------------------------
# 该类已经被定义为全局变量 $sys_timer
# 如果只需要精确到毫秒，请设置初始化参数为true
# decimal属性设置返回时间值的小数位数。
# ------------------------------------------------------------------------
# 下面是一些有用的方法列表，调用时写：$sys_timer.方法名
# 例如 $sys_timer.clear()
# ------------------------------------------------------------------------
# clear() ：计时器清零
# now() ：获取当前经过的时间，单位毫秒
# now_s() ：获取当前经过的时间，单位秒
# ------------------------------------------------------------------------
class SystemTimer
attr_accessor:decimal #小数位数设定，默认为3
def initialize(use_GetTime=false)
# 初始化，根据系统选择不同精度计时器
@qpFrequency = Win32API.new("kernel32","QueryPerformanceFrequency",'p','L')
@qpCounter = Win32API.new("kernel32","QueryPerformanceCounter",'p','L')
@tGetTime = Win32API.new("winmm","timeGetTime",'','L')
@decimal=3
@perf_cnt=" " * 8
@time_start=" " * 8
@time_now=" " * 8
result = @qpFrequency.call(@perf_cnt)
if use_GetTime
result = 0
end
if result!=0
@perf_flag=true
else
@perf_flag=false
@perf_cnt=[1000,0].pack('LL')
end
#设置时间比例因数
@time_scale=@perf_cnt.unpack('LL')
@time_scale[0] /= 1000.0
@time_scale[1] /= 1000.0
#起始时间清零
self.clear()
end
#-=====================-#
# 计时器清零
#-=====================-#
def clear()
if @perf_flag
@qpCounter.call(@time_start)
else
@time_start=[@tGetTime.call(),0].pack('LL')
end
end
#-==============================-#
# 获取当前经过的时间，单位毫秒
#-==============================-#
def now()
now_time = 0.0e1
now_time += self.timer() - self.start()
now_time /= self.scale()
return self.debug(now_time)
end
#-==============================-#
# 获取当前经过的时间，单位秒
#-==============================-#
def now_s()
now_time = 0.0e1
now_time += self.timer() - self.start()
now_time /= (self.scale()*1000)
return self.debug(now_time)
end
#-==============================-#
# 帧错...
#-==============================-#
def debug(now_time)
if @decimal>0
now_time = (now_time * (10**@decimal)).floor/(10.0**@decimal)
else
now_time = now_time.floor
end
return now_time
#以下用于debug模式
if now_time < 0
p "Timer Wrong!! Clear...",now_time, @perf_flag,@qpCounter,@tGetTime,
@time_now.unpack('LL')[0],@time_now.unpack('LL')[1],
@time_start.unpack('LL')[0],@time_start.unpack('LL')[1]
self.clear()
return 0.0
else
return now_time
end
end
#-=====================-#
# 获取时间比例因数
#-=====================-#
def scale()
return @time_scale[0]+ @time_scale[1]*0xffffffff
end
#-=====================-#
# 获取起始滴答数
#-=====================-#
def start()
return @time_start.unpack('LL')[0]+ @time_start.unpack('LL')[1]*0xffffffff
end
#-=====================-#
# 获取当前的嘀哒数
#-=====================-#
def timer()
if @perf_flag
@qpCounter.call(@time_now)
else
@time_now=[@tGetTime.call(),0].pack('LL')
end
return @time_now.unpack('LL')[0]+ @time_now.unpack('LL')[1]*0xffffffff
end
end
#-------------------------------------#
# 初始化自身成一个全局变量
#-------------------------------------#
$sys_timer=SystemTimer.new()
#-------------------------------------#
#==============================================================================
# ☆★☆ AVI播放器 ☆★☆
#------------------------------------------------------------------------------
# - FantasyDR
# - 2006.3.8
#------------------------------------------------------------------------------
# MSN: [email protected]
#------------------------------------------------------------------------------
# Note:
#
# 1.游戏必须使用游戏样板工程附带的RGSS102J.dll
#
# 2.在下方 PROJECT_NAME = 后面填写你的游戏工程名.
#
# 3.在游戏中,调用脚本事件播放你的视频文件,如果一行写不下可以在逗号后换行.
#
# $MP.play(movie_name, movie_length,
# skip, fullscr,
# x, y, width, height, loop)
#
# 参数说明:
#
# movie_name : 视频文件名(*.avi),必须
# movie_length : 电影时间,单位是秒,必须
# skip : 是否可以按A键跳过,true/false,默认是true
# fullscr : 是否强制为全屏幕播放,true/false,默认是false
# x,y : 视频播放的左上角坐标,默认是0,0
# width,height : 视频的宽度,可以任意.默认是640,480
# loop : 循环播放,true/false,默认是true
#
# 例如播放logo.avi,时间13秒,禁止跳过,强制全屏,范围(是0,0)-(640,480),循环播放
# $MP.play("logo.avi",13,false,true)
#==============================================================================
# ★★★请先这里填写游戏的工程名★★★
PROJECT_NAME = "The AVI Player"
#==============================================================================
# ■ Win32API
#------------------------------------------------------------------------------
# 　需要用到的API
#==============================================================================
# 切换到全屏延时
SWITCH_DELAY = 0.1
# API使用的一些常数
WS_EX_TOPMOST = 0x8
WS_EX_TOOLWINDOW= 0x80
WS_VISIBLE = 0x10000000
WS_POPUP = 0x80000000
GWL_HINSTANCE = (-6)
WM_CLOSE = 0x10
WS_CHILD = 0x40000000
WS_NONE = 0x16000000
CP_ACP = 0
CP_UTF8 = 65001
# 字符编码转换API
$MP_m2w = Win32API.new('kernel32', 'MultiByteToWideChar', '%w(i,l,p,i,p,i)', 'i')
$MP_w2m = Win32API.new('kernel32', 'WideCharToMultiByte', '%w(i,l,p,i,p,i,p,p)', 'i')

# 按键API
$MP_keybd = Win32API.new('user32', 'keybd_event', '%w(i,i,l,l)', 'v')
# 视频播放API
$MP_mciSendString = Win32API.new('winmm','mciSendString','%w(p,p,l,l)','V')
# 锁定窗口
# hWnd,ifEnable
$MP_EnableWindow = Win32API.new('user32','EnableWindow','%w(l,l)','L')
# 激活窗口
# hWnd
$MP_SetActiveWindow = Win32API.new('user32','SetActiveWindow','%w(l)','L')
# 当前活动窗口
$MP_GetActiveWindow = Win32API.new('user32','GetActiveWindow','%w()','L')
# hWnd,wMsg,wParam,lParam
$MP_PostMessage = Win32API.new('user32','PostMessage','%w(l,l,l,p)','L')
# 获取当前窗口句柄
$MP_FindWindowEX = Win32API.new('user32','FindWindowEx','%w(l,l,p,p)','L')
# 获取屏幕坐标
$MP_ClientToScreen = Win32API.new("user32", "ClientToScreen", 'ip', 'i')
# 获取hInt
$MP_GetWindowLong= Win32API.new('user32','GetWindowLong','%w(l,l)','L')
# 获取类名
# hWnd,lpClassName,maxCount
$MP_GetClassName= Win32API.new('user32','GetClassName','%w(l,p,l)','L')
# 建立窗体
# ExStyle,ClassName,WindowName,
# style,x,y,width,height
# 0,0,hInstance,0
$MP_CreateWindowEX = Win32API.new('user32','CreateWindowEx','%w(l,p,p,l,l,l,l,l,l,l,l,p)','L')

#==============================================================================
# ■ MoviePlayer
#------------------------------------------------------------------------------
# 　处理视频播放画面的类。
#==============================================================================
class MoviePlayer
#--------------------------------------------------------------------------
# ● 初始化
# project_name : 工程名称
#--------------------------------------------------------------------------
def initialize(project_name = PROJECT_NAME)
@sys_timer=SystemTimer.new()
buffer = "\0\0" * project_name.size
@project_name = "\0" * project_name.size
$MP_m2w.call(CP_UTF8, 0, project_name, -1, buffer, project_name.size)
$MP_w2m.call(CP_ACP,0,buffer,-1,@project_name,project_name.size,0,0)
@hWnd = $MP_FindWindowEX.call(0,0,nil,@project_name)
@hInt = $MP_GetWindowLong.call(@hWnd,GWL_HINSTANCE)
@class_name = " " * 256
$MP_GetClassName.call(@hWnd,@class_name,256)
end
#--------------------------------------------------------------------------
# ● 是否已经全屏幕
#--------------------------------------------------------------------------
def is_full?
# 播放起始坐标
point = [0, 0].pack('ll')
if $MP_ClientToScreen.call(@hWnd, point) == 0
return false
end
x, y = point.unpack('ll')
if x == 0 and y == 0
return true
else
return false
end
end
#--------------------------------------------------------------------------
# ● 切换全屏
#--------------------------------------------------------------------------
def switch_full
$MP_keybd.call (0xA4, 0, 0, 0)
$MP_keybd.call (13, 0, 0, 0)
$MP_keybd.call (13, 0, 2, 0)
$MP_keybd.call (0xA4, 0, 2, 0)
Graphics.update
sleep(SWITCH_DELAY)
Graphics.update
end
#--------------------------------------------------------------------------
# ● 播放电影
# movie_name : 视频文件名(*.avi)
# movie_length : 电影时间,单位是秒
# skip : 是否可以按键跳过
# fullscr : 是否强制为全屏幕播放
# x,y,width,height: 播放的位置以及宽度
# loop : 循环播放
#--------------------------------------------------------------------------
def play(movie_name,movie_length,
skip = true,fullscr = false,
x = 0,y = 0,width = 640,height = 480,loop = true)
# 数据不合法则退出
return true if movie_name == nil or movie_length <= 0
# 文件不存在
#.........................................................................
#movie_name = Dir.getwd()+"\\"+movie_name
#.........................................................................
return true unless FileTest.exist?(movie_name)
# 窗口宽度
width -= (x + width)- 640 if (x + width) > 640
height -= (y + height)- 480 if (y + height) > 480
if fullscr and !is_full?
self.switch_full
end
fullscr = self.is_full?
# 播放起始坐标
point = [x, y].pack('ll')
if $MP_ClientToScreen.call(@hWnd, point) == 0
return true
end
x, y = point.unpack('ll')
return true if (x + width) < 0 or (y+height) < 0
if fullscr
wnd = $MP_CreateWindowEX.call(WS_EX_TOPMOST,@class_name,@project_name,
WS_VISIBLE | WS_POPUP,x,y,width,height,
0,0,@hInt,0)
else
wnd = $MP_CreateWindowEX.call(WS_EX_TOOLWINDOW,@class_name,@project_name,
WS_VISIBLE | WS_POPUP,x,y,width,height,
0,0,@hInt,0)
end
# 窗体建立失败
return true if wnd == 0
# 屏蔽原窗体
$MP_EnableWindow.call(@hWnd,0)
$MP_mciSendString.call("open \"" + movie_name + "\"" +
" alias FILE style 1073741824 parent " + wnd.to_s,0,0,0)
if loop
$MP_mciSendString.call("play FILE repeat window",0,0,0)
else
$MP_mciSendString.call("play FILE window",0,0,0)
end
@sys_timer.clear()
step = 0.1
begin
loop do
# 如果在窗口模式
unless fullscr
# 变成全屏
if self.is_full?
break
else
Graphics.update
end
end
#sleep(step)
if skip
Input.update
break if Input.trigger?(Input::A)
end
if @sys_timer.now_s >= movie_length
break
end
if $MP_GetActiveWindow.call() != wnd
$MP_SetActiveWindow.call(wnd)
end
end
rescue Hangup
retry
end
# 关闭当前窗体
$MP_PostMessage.call(wnd,WM_CLOSE,0,0)
$MP_mciSendString.call("close FILE",0,0,0)
$MP_EnableWindow.call(@hWnd,1)
$MP_SetActiveWindow.call(@hWnd)
return true
end
end
$MP = MoviePlayer.new

春风莉露

喔喔
这个还真不会呀，抱歉。
只懂简单的标题菜单的改法。

灵魂の补给

目测不用改脚本。
# $MP.play(movie_name, movie_length, )
name比如"m.avi"
改成"./目录名/m.avi"
即可