能不能整合耐久度脚本

u566 · 发表于 2011-3-5 11:00:42

能不能把沉影不器前辈的耐久度脚本和新的帮助窗口整合一下（主要是修复界面）
顺便问一句，武器攻击力随机和耐久度脚本能否整合？
贴上脚本

#==============================================================================
# 装备耐久度
# by 沉影不器
#==============================================================================
#主要更改:
#
# ① 角色的每件装备都是原数据库的克隆品,使每件装备都有唯一id
# ② 角色物品窗口中所有装备单独一格
# ③ 更改了商店中对装备的买卖方式,跳过输入数量,只能一件一件买卖
# ④ 战斗中,打人消耗武器耐久度(非物理攻击的技能不消耗),被打消耗防具耐久度,有一定机率
# ⑤ 装备耐久度降为 0 时即是装备损坏,装备能力消失,可修复
# ⑥ 损坏的装备将在地图上显示
# ⑦ 装备卖出价格随耐久度打折
#------------------------------------------------------------------------------
#使用说明
#
# ① 武器耐久度在[数据库-武器]一栏的武器名称后输入,格式为"武器名,耐久度最大值"
# 例如"铜剑,12"表示铜剑最大耐久度为12
# 防具设定同上
# ② 脚本第31行设定原数据库武器最大id
# 例如:默认数据库里最后一个武器是密斯利尔杖,id是32
# ③ 脚本第32行设定原数据库防具最大id,同上
# ●注意! 以上两个常量为必设,须根据您自己的数据库更改,否则出错
# ④ 脚本第33行设定最大耐久度
# 脚本第34行设定修复装备时的音效
# ⑤ 角色初期装备最好没有重复id的装备,比如默认数据库中几个人物都用了铜盾(id:1)
# 这将使几个人物的该铜盾共享一个耐久度
# ⑥ 使用$scene = Scene_Dur_Equip.new调出修复装备画面
#==============================================================================
module DUR
DATA_WEAPON_SIZE = 32 # 原数据库武器最大id
DATA_ARMOR_SIZE = 32 # 原数据库防具最大id
DUR_SET_MAX = 2000 # 最大耐久度
REP_SE = "055-Right01" # 修复装备时的音效文件名
end
#==============================================================================
class Game_Actor < Game_Battler
#--------------------------------------------------------------------------
def base_str
n = $data_actors[@actor_id].parameters[2, @level]
weapon = $data_weapons[@weapon_id]
armor1 = $data_armors[@armor1_id]
armor2 = $data_armors[@armor2_id]
armor3 = $data_armors[@armor3_id]
armor4 = $data_armors[@armor4_id]
n += (weapon != nil ) ? weapon.str_plus : 0
n += (armor1 != nil ) ? armor1.str_plus : 0
n += (armor2 != nil ) ? armor2.str_plus : 0
n += (armor3 != nil ) ? armor3.str_plus : 0
n += (armor4 != nil ) ? armor4.str_plus : 0
return [[n, 1].max, 999].min
end
#--------------------------------------------------------------------------
def base_dex
n = $data_actors[@actor_id].parameters[3, @level]
weapon = $data_weapons[@weapon_id]
armor1 = $data_armors[@armor1_id]
armor2 = $data_armors[@armor2_id]
armor3 = $data_armors[@armor3_id]
armor4 = $data_armors[@armor4_id]
n += (weapon != nil ) ? weapon.dex_plus : 0
n += (armor1 != nil ) ? armor1.dex_plus : 0
n += (armor2 != nil ) ? armor2.dex_plus : 0
n += (armor3 != nil ) ? armor3.dex_plus : 0
n += (armor4 != nil ) ? armor4.dex_plus : 0
return [[n, 1].max, 999].min
end
#--------------------------------------------------------------------------
def base_agi
n = $data_actors[@actor_id].parameters[4, @level]
weapon = $data_weapons[@weapon_id]
armor1 = $data_armors[@armor1_id]
armor2 = $data_armors[@armor2_id]
armor3 = $data_armors[@armor3_id]
armor4 = $data_armors[@armor4_id]
n += (weapon != nil ) ? weapon.agi_plus : 0
n += (armor1 != nil ) ? armor1.agi_plus : 0
n += (armor2 != nil ) ? armor2.agi_plus : 0
n += (armor3 != nil ) ? armor3.agi_plus : 0
n += (armor4 != nil ) ? armor4.agi_plus : 0
return [[n, 1].max, 999].min
end
#--------------------------------------------------------------------------
def base_int
n = $data_actors[@actor_id].parameters[5, @level]
weapon = $data_weapons[@weapon_id]
armor1 = $data_armors[@armor1_id]
armor2 = $data_armors[@armor2_id]
armor3 = $data_armors[@armor3_id]
armor4 = $data_armors[@armor4_id]
n += (weapon != nil ) ? weapon.int_plus : 0
n += (armor1 != nil ) ? armor1.int_plus : 0
n += (armor2 != nil ) ? armor2.int_plus : 0
n += (armor3 != nil ) ? armor3.int_plus : 0
n += (armor4 != nil ) ? armor4.int_plus : 0
return [[n, 1].max, 999].min
end
#--------------------------------------------------------------------------
def base_atk
weapon = $data_weapons[@weapon_id]
return (weapon != nil ) ? weapon.atk : 0
end
#--------------------------------------------------------------------------
def base_pdef
weapon = $data_weapons[@weapon_id]
armor1 = $data_armors[@armor1_id]
armor2 = $data_armors[@armor2_id]
armor3 = $data_armors[@armor3_id]
armor4 = $data_armors[@armor4_id]
pdef1 = (weapon != nil ) ? weapon.pdef : 0
pdef2 = (armor1 != nil ) ? armor1.pdef : 0
pdef3 = (armor2 != nil ) ? armor2.pdef : 0
pdef4 = (armor3 != nil ) ? armor3.pdef : 0
pdef5 = (armor4 != nil ) ? armor4.pdef : 0
return pdef1 + pdef2 + pdef3 + pdef4 + pdef5
end
#--------------------------------------------------------------------------
def base_mdef
weapon = $data_weapons[@weapon_id]
armor1 = $data_armors[@armor1_id]
armor2 = $data_armors[@armor2_id]
armor3 = $data_armors[@armor3_id]
armor4 = $data_armors[@armor4_id]
mdef1 = (weapon != nil ) ? weapon.mdef : 0
mdef2 = (armor1 != nil ) ? armor1.mdef : 0
mdef3 = (armor2 != nil ) ? armor2.mdef : 0
mdef4 = (armor3 != nil ) ? armor3.mdef : 0
mdef5 = (armor4 != nil ) ? armor4.mdef : 0
return mdef1 + mdef2 + mdef3 + mdef4 + mdef5
end
#--------------------------------------------------------------------------
def base_eva
armor1 = $data_armors[@armor1_id]
armor2 = $data_armors[@armor2_id]
armor3 = $data_armors[@armor3_id]
armor4 = $data_armors[@armor4_id]
eva1 = (armor1 != nil ) ? armor1.eva : 0
eva2 = (armor2 != nil ) ? armor2.eva : 0
eva3 = (armor3 != nil ) ? armor3.eva : 0
eva4 = (armor4 != nil ) ? armor4.eva : 0
return eva1 + eva2 + eva3 + eva4
end
end
#==============================================================================
class Game_Party
#--------------------------------------------------------------------------
attr_accessor :weapons
attr_accessor :armors
#--------------------------------------------------------------------------
def weapon_number(weapon_id)
return @weapons.include?(weapon_id) ? @weapons[weapon_id] : 0
end
#--------------------------------------------------------------------------
# 以下修改于<<武器攻击力波动>>(灼眼的夏娜)
def gain_weapon(weapon_id, n)
if weapon_id > 0
if n > 0 # 增加武器的情况
n = 1
# 装备栏中使用的武器不处理~
if $scene.is_a?(Scene_Equip)
@weapons[weapon_id] = [[weapon_number(weapon_id) + n, 0].max, 99].min
else
new_weapon = $data_weapons[weapon_id].clone
new_weapon.dur_set = $data_weapons[weapon_id].dur_set
new_weapon.dur = $data_weapons[weapon_id].dur_set
new_weapon.id = $data_weapons.size
#数据库扩容
$data_weapons.push(new_weapon)
# 职业可装备武器数组更新~
for i in 1...$data_classes.size
if $data_classes[i].weapon_set.include?(weapon_id)
$data_classes[i].weapon_set.push(new_weapon.id)
end
end
# 增加武器~
@weapons[new_weapon.id] = [[weapon_number(new_weapon.id) + n, 0].max, 99].min
end
else # n < 0 减少武器的情况(未定的情况: n = 0)
n = -1
# 装备栏中卸下的武器不处理~
if $scene.is_a?(Scene_Equip)
@weapons[weapon_id] = [[weapon_number(weapon_id) + n, 0].max, 99].min
else
lose_name = $data_weapons[weapon_id].name
dur_min = DUR::DUR_SET_MAX
for i in DUR::DATA_WEAPON_SIZE+1...$data_weapons.size
# 重新确定weapon_id,必定在原武器数据库之外
# 减少同名武器中耐久度最低的
if $data_weapons[i].name == lose_name and $data_weapons[i].dur < dur_min
weapon_id = i
end
end
# 已不存在的不做操作
if weapon_number(weapon_id) <= 0
return
end
# 减少武器
@weapons[weapon_id] = [[weapon_number(weapon_id) + n, 0].max, 99].min
# 删除行囊拥有的武器id,后id补进
@weapons.delete(weapon_id)
weapon_keys = @weapons.keys.sort!
for i in weapon_keys
if i > weapon_id
@weapons[i-1] = @weapons[i]
@weapons.delete(i)
end
end
# 更改角色使用中的武器id
for i in [email protected]
if @actors[i].weapon_id != nil and @actors[i].weapon_id > weapon_id
@actors[i].weapon_id -= 1
end
end
if weapon_id > DUR::DATA_WEAPON_SIZE
# 删除数据库武器id,后补进
for i in weapon_id+1...$data_weapons.size
$data_weapons[i].id -= 1
end
$data_weapons.delete_at(weapon_id)
# 职业可装备武器数组更新
for i in 1...$data_classes.size
if $data_classes[i].weapon_set.include?(weapon_id)
$data_classes[i].weapon_set.delete(weapon_id)
end
for j in $data_classes[i].weapon_set
if j > weapon_id
$data_classes[i].weapon_set.delete(j)
j -= 1
$data_classes[i].weapon_set.push(j)
end
end
end
end
end
end
end
end
#--------------------------------------------------------------------------
def gain_armor(armor_id, n)
if armor_id > 0
if n > 0 # 增加防具的情况
n = 1
# 装备栏中使用的防具不处理~
if $scene.is_a?(Scene_Equip)
@armors[armor_id] = [[armor_number(armor_id) + n, 0].max, 99].min
else
new_armor = $data_armors[armor_id].clone
new_armor.dur_set = $data_armors[armor_id].dur_set
new_armor.dur = $data_armors[armor_id].dur_set
new_armor.id = $data_armors.size
#数据库扩容
$data_armors.push(new_armor)
# 职业可装备防具数组更新~
for i in 1...$data_classes.size
if $data_classes[i].armor_set.include?(armor_id)
$data_classes[i].armor_set.push(new_armor.id)
end
end
# 增加防具
@armors[new_armor.id] = [[armor_number(new_armor.id) + n, 0].max, 99].min
end
else # n < 0 减少防具的情况(未定的情况: n = 0)
n = -1
# 装备栏中卸下的防具不处理
if $scene.is_a?(Scene_Equip)
@armors[armor_id] = [[armor_number(armor_id) + n, 0].max, 99].min
else
lose_name = $data_armors[armor_id].name
dur_min = DUR::DUR_SET_MAX
for i in DUR::DATA_ARMOR_SIZE+1...$data_armors.size
# 重新确定armor_id,必定在原防具数据库之外
# 减少同名防具中耐久度最低的
if $data_armors[i].name == lose_name and $data_armors[i].dur < dur_min
armor_id = i
end
end
# 已不存在的不做操作
if armor_number(armor_id) <= 0
return
end
# 减少防具
@armors[armor_id] = [[armor_number(armor_id) + n, 0].max, 99].min
# 删除行囊拥有的防具id,后id补进
@weapons.delete(armor_id)
armor_keys = @armors.keys.sort!
for i in armor_keys
if i > armor_id
@armors[i-1] = @armors[i]
@armors.delete(i)
end
end
# 更改角色使用中的防具id
for i in [email protected]
if @actors[i].armor1_id != nil and @actors[i].armor1_id > armor_id
@actors[i].armor1_id -= 1
end
if @actors[i].armor2_id != nil and @actors[i].armor2_id > armor_id
@actors[i].armor2_id -= 1
end
if @actors[i].armor3_id != nil and @actors[i].armor3_id > armor_id
@actors[i].armor3_id -= 1
end
if @actors[i].armor4_id != nil and @actors[i].armor4_id > armor_id
@actors[i].armor4_id -= 1
end
end
if armor_id > DUR::DATA_ARMOR_SIZE
# 删除数据库防具id,后补进
for i in armor_id+1...$data_armors.size
$data_armors[i].id -= 1
end
$data_armors.delete_at(armor_id)
# 职业可装备防具数组更新
for i in 1...$data_classes.size
if $data_classes[i].armor_set.include?(armor_id)
$data_classes[i].armor_set.delete(armor_id)
end
for j in $data_classes[i].armor_set
if j > armor_id
$data_classes[i].armor_set.delete(j)
j -= 1
$data_classes[i].armor_set.push(j)
end
end
end
end
end
end
end
end
end
# ===========================================================================
class Window_Item < Window_Selectable
#--------------------------------------------------------------------------
def update_help
description = ""
if self.item != nil
description = self.item.description
if !self.item.is_a? RPG::Item
dur_set = item.dur_set
dur = item.dur
description = description + " 耐久度: #{dur}/#{dur_set}"
end
end
@help_window.set_text(description)
end
end
# ===========================================================================
class Window_EquipItem < Window_Selectable
#--------------------------------------------------------------------------
def update_help
description = ""
if self.item != nil
description = self.item.description
dur_set = item.dur_set
dur = item.dur
description = description + " 耐久度: #{dur}/#{dur_set}"
end
@help_window.set_text(description)
end
end
class Scene_Title
#--------------------------------------------------------------------------
alias main_add_dur main
def main
main_add_dur
# 战斗测试的情况下
if $BTEST
battle_test
return
end
$data_weapons = load_data("Data/Weapons.rxdata")
$data_armors = load_data("Data/Armors.rxdata")
# 初始化耐久度
for i in 1...$data_weapons.size
$data_weapons[i].dur = $data_weapons[i].dur_set
end
for i in 1...$data_armors.size
$data_armors[i].dur = $data_armors[i].dur_set
end
end
end
#==============================================================================
class Scene_Shop
#--------------------------------------------------------------------------
def update_buy
@status_window.item = @buy_window.item
if Input.trigger?(Input::B)
$game_system.se_play($data_system.cancel_se)
# 窗口状态转向初期模式
@command_window.active = true
@dummy_window.visible = true
@buy_window.active = false
@buy_window.visible = false
@status_window.visible = false
@status_window.item = nil
@help_window.set_text("")
return
end
if Input.trigger?(Input::C)
@item = @buy_window.item
if @item == nil or @item.price > $game_party.gold
$game_system.se_play($data_system.buzzer_se)
return
end
case @item
when RPG::Item
number = $game_party.item_number(@item.id)
when RPG::Weapon
number = $game_party.weapon_number(@item.id)
when RPG::Armor
number = $game_party.armor_number(@item.id)
end
if number == 99
$game_system.se_play($data_system.buzzer_se)
return
end
$game_system.se_play($data_system.decision_se)
max = @item.price == 0 ? 99 : $game_party.gold / @item.price
max = [max, 99 - number].min
if @item.is_a? RPG::Item # 除物品外直接买进1件
@buy_window.active = false
@buy_window.visible = false
@number_window.set(@item, max, @item.price)
@number_window.active = true
@number_window.visible = true
else
update_number
end
end
end
#--------------------------------------------------------------------------
def update_sell
if Input.trigger?(Input::B)
$game_system.se_play($data_system.cancel_se)
@command_window.active = true
@dummy_window.visible = true
@sell_window.active = false
@sell_window.visible = false
@status_window.item = nil
@help_window.set_text("")
return
end
if Input.trigger?(Input::C)
@item = @sell_window.item
@status_window.item = @item
if @item == nil or @item.price == 0
$game_system.se_play($data_system.buzzer_se)
return
end
$game_system.se_play($data_system.decision_se)
case @item
when RPG::Item
number = $game_party.item_number(@item.id)
when RPG::Weapon
number = $game_party.weapon_number(@item.id)
when RPG::Armor
number = $game_party.armor_number(@item.id)
end
max = number
if @item.is_a? RPG::Item # 除物品外直接卖出1件
@sell_window.active = false
@sell_window.visible = false
@number_window.set(@item, max, @item.price / 2)
@number_window.active = true
@number_window.visible = true
@status_window.visible = true
else
update_number
end
end
end
#--------------------------------------------------------------------------
def update_number
# 按下 B 键的情况下
if Input.trigger?(Input::B)
$game_system.se_play($data_system.cancel_se)
@number_window.active = false
@number_window.visible = false
case @command_window.index
when 0 # 购买
@buy_window.active = true
@buy_window.visible = true
when 1 # 卖出
@sell_window.active = true
@sell_window.visible = true
@status_window.visible = false
end
return
end
# 按下 C 键的情况下
if Input.trigger?(Input::C)
$game_system.se_play($data_system.shop_se)
@number_window.active = false
@number_window.visible = false
case @command_window.index
when 0 # 购买
$game_party.lose_gold(@number_window.number * @item.price)
case @item
when RPG::Item
$game_party.gain_item(@item.id, @number_window.number)
when RPG::Weapon
$game_party.gain_weapon(@item.id, @number_window.number)
when RPG::Armor
$game_party.gain_armor(@item.id, @number_window.number)
end
@gold_window.refresh
@buy_window.refresh
@status_window.refresh
@buy_window.active = true
@buy_window.visible = true
when 1 # 卖出
$game_party.gain_gold(@number_window.number * rep_cost(@item) / 2)
case @item
when RPG::Item
$game_party.lose_item(@item.id, @number_window.number)
when RPG::Weapon
$game_party.lose_weapon(@item.id, @number_window.number)
when RPG::Armor
$game_party.lose_armor(@item.id, @number_window.number)
end
@gold_window.refresh
@sell_window.refresh
@status_window.refresh
@sell_window.active = true
@sell_window.visible = true
@status_window.visible = false
end
return
end
end
end
#==============================================================================
class Game_Battler
#--------------------------------------------------------------------------
def attack_effect(attacker)
self.critical = false
hit_result = (rand(100) < attacker.hit)
if hit_result == true
atk = [attacker.atk - self.pdef / 2, 0].max
self.damage = atk * (20 + attacker.str) / 20
self.damage *= elements_correct(attacker.element_set)
self.damage /= 100
if self.damage > 0
if rand(100) < 4 * attacker.dex / self.agi
self.damage *= 2
self.critical = true
end
if self.guarding?
self.damage /= 2
end
end
if self.damage.abs > 0
amp = [self.damage.abs * 15 / 100, 1].max
self.damage += rand(amp+1) + rand(amp+1) - amp
end
eva = 8 * self.agi / attacker.dex + self.eva
hit = self.damage < 0 ? 100 : 100 - eva
hit = self.cant_evade? ? 100 : hit
hit_result = (rand(100) < hit)
end
if hit_result == true
remove_states_shock
self.hp -= self.damage
@state_changed = false
states_plus(attacker.plus_state_set)
states_minus(attacker.minus_state_set)
else
self.damage = "Miss"
self.critical = false
end
# 耐久度判断
if hit_result == true
if self.is_a?(Game_Actor) # 如果挨打的是角色,减防具耐久度
armor_kind = 1 + rand(4)
case armor_kind
when 1
if self.armor1_id != nil and self.armor1_id > 0
if rand(2) == 0 and $data_armors[self.armor1_id].dur >= 0
$data_armors[self.armor1_id].dur -= 1
end
end
when 2
if self.armor2_id != nil and self.armor2_id > 0
if rand(2) == 0 and $data_armors[self.armor2_id].dur >= 0
$data_armors[self.armor2_id].dur -= 1
end
end
when 3
if self.armor3_id != nil and self.armor3_id > 0
if rand(2) == 0 and $data_armors[self.armor3_id].dur >= 0
$data_armors[self.armor3_id].dur -= 1
end
end
when 4
if self.armor4_id != nil and self.armor4_id > 0
if rand(2) == 0 and $data_armors[self.armor4_id].dur >= 0
$data_armors[self.armor4_id].dur -= 1
end
end
end
else # 角色打人,减武器耐久度
if attacker.weapon_id != nil and attacker.weapon_id > 0
if rand(8) == 0 and $data_weapons[attacker.weapon_id].dur > 0
$data_weapons[attacker.weapon_id].dur -= 1
end
end
end
end
# 过程结束
return true
end
#--------------------------------------------------------------------------
def skill_effect(user, skill)
self.critical = false
if ((skill.scope == 3 or skill.scope == 4) and self.hp == 0) or
((skill.scope == 5 or skill.scope == 6) and self.hp >= 1)
return false
end
effective = false
effective |= skill.common_event_id > 0
hit = skill.hit
if skill.atk_f > 0
hit *= user.hit / 100
end
hit_result = (rand(100) < hit)
effective |= hit < 100
if hit_result == true
power = skill.power + user.atk * skill.atk_f / 100
if power > 0
power -= self.pdef * skill.pdef_f / 200
power -= self.mdef * skill.mdef_f / 200
power = [power, 0].max
end
rate = 20
rate += (user.str * skill.str_f / 100)
rate += (user.dex * skill.dex_f / 100)
rate += (user.agi * skill.agi_f / 100)
rate += (user.int * skill.int_f / 100)
self.damage = power * rate / 20
self.damage *= elements_correct(skill.element_set)
self.damage /= 100
if self.damage > 0
if self.guarding?
self.damage /= 2
end
end
if skill.variance > 0 and self.damage.abs > 0
amp = [self.damage.abs * skill.variance / 100, 1].max
self.damage += rand(amp+1) + rand(amp+1) - amp
end
eva = 8 * self.agi / user.dex + self.eva
hit = self.damage < 0 ? 100 : 100 - eva * skill.eva_f / 100
hit = self.cant_evade? ? 100 : hit
hit_result = (rand(100) < hit)
effective |= hit < 100
end
if hit_result == true
if skill.power != 0 and skill.atk_f > 0
remove_states_shock
effective = true
end
last_hp = self.hp
self.hp -= self.damage
effective |= self.hp != last_hp
@state_changed = false
effective |= states_plus(skill.plus_state_set)
effective |= states_minus(skill.minus_state_set)
if skill.power == 0
self.damage = ""
unless @state_changed
self.damage = "Miss"
end
end
else
self.damage = "Miss"
end
unless $game_temp.in_battle
self.damage = nil
end
# 耐久度判断
if hit_result == true
if self.is_a?(Game_Actor) # 如果挨打的是角色,减防具耐久度
armor_kind = 1 + rand(4)
case armor_kind
when 1
if self.armor1_id != nil and self.armor1_id > 0
if rand(2) == 0 and $data_armors[self.armor1_id].dur > 0
$data_armors[self.armor1_id].dur -= 1
end
end
when 2
if self.armor2_id != nil and self.armor2_id >= 0
if rand(2) == 0 and $data_armors[self.armor2_id].dur >= 0
$data_armors[self.armor2_id].dur -= 1
end
end
when 3
if self.armor3_id != nil and self.armor3_id > 0
if rand(2) == 0 and $data_armors[self.armor3_id].dur >= 0
$data_armors[self.armor3_id].dur -= 1
end
end
when 4
if self.armor4_id != nil and self.armor4_id > 0
if rand(2) == 0 and $data_armors[self.armor4_id].dur >= 0
$data_armors[self.armor4_id].dur -= 1
end
end
end
else # 角色打人,减武器耐久度
if user.weapon_id != nil and user.weapon_id > 0
if rand(8) == 0 and $data_weapons[user.weapon_id].dur >= 0
if skill.atk_f == 0 # 非物理技能不损武器耐久度
$data_weapons[user.weapon_id].dur -= 1
end
end
end
end
end
# 过程结束
return effective
end
end
#==============================================================================
class Window_Dur < Window_Base
#--------------------------------------------------------------------------
def initialize
super(0,0,320,480)
self.opacity = 0
self.contents = Bitmap.new(width - 32, height - 32)
@text_dur_old = [0]
@text_dur = []
refresh
end
#--------------------------------------------------------------------------
def draw_text_dur(index,y)
text = @text_dur[index]
tx = 0
ty = index * 24 + y
self.contents.font.color = normal_color
self.contents.draw_text(tx, ty, 320-32, 24, text)
end
#--------------------------------------------------------------------------
def refresh
# 节省内存
if @text_dur_old == @text_dur
return
end
@text_dur.clear
# 取得空耐久度的装备名
for i in $game_party.actors
if $data_weapons[i.weapon_id] != nil and $data_weapons[i.weapon_id].dur == 0
@text_dur.push(i.name + "-" + $data_weapons[i.weapon_id].name)
end
if $data_armors[i.armor1_id] != nil and $data_armors[i.armor1_id].dur == 0
@text_dur.push(i.name + "-" + $data_armors[i.armor1_id].name)
end
if $data_armors[i.armor2_id] != nil and $data_armors[i.armor2_id].dur == 0
@text_dur.push(i.name + "-" + $data_armors[i.armor2_id].name)
end
if $data_armors[i.armor3_id] != nil and $data_armors[i.armor3_id].dur == 0
@text_dur.push(i.name + "-" + $data_armors[i.armor3_id].name)
end
if $data_armors[i.armor4_id] != nil and $data_armors[i.armor4_id].dur == 0
@text_dur.push(i.name + "-" + $data_armors[i.armor4_id].name)
end
end
@text_dur_old = @text_dur
y = 448 - @text_dur.size * 24
self.contents.clear
self.contents.font.size = 14
if @text_dur != []
self.contents.font.color = Color.new(255, 0, 0) # 红色显示
self.contents.draw_text(0, y - 24, 320 - 32, 24, "装备损坏:")
end
for i in 0... @text_dur.size
draw_text_dur(i,y)
end
self.contents.font.size = Font.default_size
end
end
#==============================================================================
class Window_Dur_Equip < Window_Selectable
#--------------------------------------------------------------------------
def initialize
super(0, 128, 640, 352)
@column_max = 2
refresh
self.index = 0
end
#--------------------------------------------------------------------------
def item
return @data[self.index]
end
#--------------------------------------------------------------------------
def refresh
if self.contents != nil
self.contents.dispose
self.contents = nil
end
@data = []
# 添加武器、防具
for i in 1...$data_weapons.size
if $game_party.weapon_number(i) > 0
@data.push($data_weapons[i])
end
end
for i in 1...$data_armors.size
if $game_party.armor_number(i) > 0
@data.push($data_armors[i])
end
end
@item_max = @data.size
# 有项目时再描绘
if @item_max > 0
self.contents = Bitmap.new(width - 32, row_max * 32)
for i in 0...@item_max
draw_item(i)
end
end
end
#--------------------------------------------------------------------------
def draw_item(index)
item = @data[index]
case item
when RPG::Weapon
number = $game_party.weapon_number(item.id)
when RPG::Armor
number = $game_party.armor_number(item.id)
end
# 有没钱修复是否需要修复
if $game_party.gold > rep_cost(item) and rep_cost(item) != 0
self.contents.font.color = normal_color
else
self.contents.font.color = disabled_color
end
x = 4 + index % 2 * (288 + 32)
y = index / 2 * 32
rect = Rect.new(x, y, self.width / @column_max - 32, 32)
self.contents.fill_rect(rect, Color.new(0, 0, 0, 0))
bitmap = RPG::Cache.icon(item.icon_name)
opacity = self.contents.font.color == normal_color ? 255 : 128
self.contents.blt(x, y + 4, bitmap, Rect.new(0, 0, 24, 24), opacity)
self.contents.draw_text(x + 28, y, 212, 32, item.name, 0)
self.contents.draw_text(x + 240, y, 16, 32, ":", 1)
self.contents.draw_text(x + 256, y, 24, 32, number.to_s, 2)
end
#--------------------------------------------------------------------------
def update_help
description = ""
if self.item != nil
description = self.item.description
if !self.item.is_a? RPG::Item
dur_set = item.dur_set
dur = item.dur
description = description + " 耐久度: #{dur}/#{dur_set}"
end
end
@help_window.set_text(description)
end
end
#==============================================================================
class Window_RepMes < Window_Base
#--------------------------------------------------------------------------
def initialize
super(0, 64, 480, 64)
self.contents = Bitmap.new(width - 32, height - 32)
end
#--------------------------------------------------------------------------
def set(rep_cost)
if rep_cost != @rep_cost
# 再描绘文本
self.contents.clear
self.contents.font.color = normal_color
if rep_cost == 0
self.contents.draw_text(4, 0, self.width - 40, 32, "无需修复!")
else
text = "修复费用:#{rep_cost}"
cx = contents.text_size(text).width
self.contents.draw_text(4, 0, self.width - 40, 32, text)
self.contents.font.color = system_color
self.contents.draw_text(8 + cx, 0, self.width - 40, 32, $data_system.words.gold)
end
@rep_cost = rep_cost
end
self.visible = true
end
end
#==============================================================================
class Scene_Map
#--------------------------------------------------------------------------
def main
@spriteset = Spriteset_Map.new
@message_window = Window_Message.new
@dur_window = Window_Dur.new
Graphics.transition
loop do
Graphics.update
Input.update
update
if $scene != self
break
end
end
Graphics.freeze
@spriteset.dispose
@message_window.dispose
@dur_window.dispose
if $scene.is_a?(Scene_Title)
Graphics.transition
Graphics.freeze
end
end
#--------------------------------------------------------------------------
def update
loop do
$game_map.update
$game_system.map_interpreter.update
$game_player.update
$game_system.update
$game_screen.update
unless $game_temp.player_transferring
break
end
transfer_player
if $game_temp.transition_processing
break
end
end
@spriteset.update
@message_window.update
@dur_window.update
if $game_temp.gameover
$scene = Scene_Gameover.new
return
end
if $game_temp.to_title
$scene = Scene_Title.new
return
end
if $game_temp.transition_processing
$game_temp.transition_processing = false
if $game_temp.transition_name == ""
Graphics.transition(20)
else
Graphics.transition(40, "Graphics/Transitions/" +
$game_temp.transition_name)
end
end
if $game_temp.message_window_showing
return
end
if $game_player.encounter_count == 0 and $game_map.encounter_list != []
unless $game_system.map_interpreter.running? or
$game_system.encounter_disabled
n = rand($game_map.encounter_list.size)
troop_id = $game_map.encounter_list[n]
if $data_troops[troop_id] != nil
$game_temp.battle_calling = true
$game_temp.battle_troop_id = troop_id
$game_temp.battle_can_escape = true
$game_temp.battle_can_lose = false
$game_temp.battle_proc = nil
end
end
end
if Input.trigger?(Input::B)
unless $game_system.map_interpreter.running? or
$game_system.menu_disabled
$game_temp.menu_calling = true
$game_temp.menu_beep = true
end
end
if $DEBUG and Input.press?(Input::F9)
$game_temp.debug_calling = true
end
unless $game_player.moving?
if $game_temp.battle_calling
call_battle
elsif $game_temp.shop_calling
call_shop
elsif $game_temp.name_calling
call_name
elsif $game_temp.menu_calling
call_menu
elsif $game_temp.save_calling
call_save
elsif $game_temp.debug_calling
call_debug
end
end
end
end
#==============================================================================
class Scene_Dur_Equip
#--------------------------------------------------------------------------
def main
@help_window = Window_Help.new
@item_window = Window_Dur_Equip.new
@gold_window = Window_Gold.new
@gold_window.x = 480
@gold_window.y = 64
@repmes_window = Window_RepMes.new
@item_window.help_window = @help_window
Graphics.transition
loop do
Graphics.update
Input.update
update
if $scene != self
break
end
end
# 装备过渡
Graphics.freeze
@help_window.dispose
@item_window.dispose
@gold_window.dispose
@repmes_window.dispose
end
#--------------------------------------------------------------------------
def update
@help_window.update
@item_window.update
@gold_window.update
# 按下 B 键的情况下
if Input.trigger?(Input::B)
$game_system.se_play($data_system.cancel_se)
# 切换到地图
$scene = Scene_Map.new
return
end
# 获取装备
@item = @item_window.item
# 为空时
if @item == nil
return
end
@rep_cost = rep_cost(@item)
@repmes_window.set(@rep_cost)
# 按下 C 键的情况下
if Input.trigger?(Input::C)
# 不能使用的情况下
if $game_party.gold < @rep_cost or @rep_cost == 0
$game_system.se_play($data_system.buzzer_se)
return
end
# 音效
Audio.se_play("Audio/SE/#{DUR::REP_SE}", 100, 100)
# 修复
if @item.is_a?(RPG::Weapon)
$data_weapons[@item.id].dur = $data_weapons[@item.id].dur_set
else
$data_armors[@item.id].dur = $data_armors[@item.id].dur_set
end
$game_party.gain_gold(-@rep_cost)
@item_window.refresh
@gold_window.refresh
return
end
end
end
#==============================================================================
class Scene_Save < Scene_File
#--------------------------------------------------------------------------
def write_save_data(file)
characters = []
for i in 0...$game_party.actors.size
actor = $game_party.actors[i]
characters.push([actor.character_name, actor.character_hue])
end
Marshal.dump(characters, file)
Marshal.dump(Graphics.frame_count, file)
$game_system.save_count += 1
$game_system.magic_number = $data_system.magic_number
Marshal.dump($game_system, file)
Marshal.dump($game_switches, file)
Marshal.dump($game_variables, file)
Marshal.dump($game_self_switches, file)
Marshal.dump($game_screen, file)
Marshal.dump($game_actors, file)
Marshal.dump($game_party, file)
Marshal.dump($game_troop, file)
Marshal.dump($game_map, file)
Marshal.dump($game_player, file)
Marshal.dump($data_weapons, file)
Marshal.dump($data_armors, file)
Marshal.dump($data_classes, file)
end
end
#==============================================================================
def rep_cost(item)
if item.is_a?(RPG::Item)
item.price
else
rep_cost = item.dur == 0 ? item.price : item.price * (item.dur_set-item.dur)/item.dur_set
end
end
#==============================================================================
module RPG
class Weapon
attr_accessor :dur_set
attr_accessor :dur
def name
name = @name.split(/,/)[0]
return name != nil ? name : ''
end
def dur_set
dur_set = @name.split(/,/)[1]
return dur_set != nil ? dur_set.to_i : 0
end
end
class Armor
attr_accessor :dur_set
attr_accessor :dur
def name
name = @name.split(/,/)[0]
return name != nil ? name : ''
end
def dur_set
dur_set = @name.split(/,/)[1]
return dur_set != nil ? dur_set.to_i : 0
end
end
end

复制代码

#==============================================================================
# ■ Window_Help
#------------------------------------------------------------------------------
# 　特技及物品的说明、角色的状态显示的窗口。
# 若要更改属性，请搜索element_set={1=>"火",2=>"冰",3=>"光",4=>"暗"} 改成对应属性即可
#==============================================================================
UNSHOW_STATE=[1,2,3,4,5]#记录不显示的状态数组
UNSHOW_ELEMENT=[1,2,3,4,5]#记录不显示的属性数组
class Window_Help < Window_Base
#--------------------------------------------------------------------------
# ● 初始化对像
#--------------------------------------------------------------------------
def initialize
super(150,200, 180, 480)
self.opacity = 150
self.z = 150
self.visible = false
self.contents = Bitmap.new(width - 32, height - 32)
description=""
@item=nil
@armor=nil
@weapon=nil
end
#--------------------------------------------------------------------------
# ● 设置文本
# text : 窗口显示的字符串
# align : 对齐方式 (0..左对齐、1..中间对齐、2..右对齐)
#--------------------------------------------------------------------------
def set_text(data, align=nil)
# 如果文本和对齐方式的至少一方与上次的不同
if align != nil
# 再描绘窗口和文本
self.width = 640
self.height = 64
self.x=0
self.y=0
self.contents = Bitmap.new(width - 32, height - 32)
self.contents.clear
self.contents.font.color = normal_color
self.contents.font.size = 20
self.contents.draw_text(4, 0, self.width - 48, 32, data, align)
self.visible = true
return
end
if data == nil
self.visible = false
@data = nil
end
if data != nil && @data != data
@data=data
self.visible = true
self.width = 180
self.height = 200
self.x=180
self.y=430
self.contents = Bitmap.new(width - 32, height - 32)
case @data
when RPG::Item
set_item_text(@data)
when RPG::Weapon
set_weapon_text(@data)
when RPG::Armor
set_armor_text(@data)
when RPG::Skill
set_skill_text(@data)
end
else
return
end
end
#--------------------------------------------------------------------------
# ● 设置敌人
# enemy : 要显示名字和状态的敌人
#--------------------------------------------------------------------------
def set_enemy(enemy)
text = enemy.name
state_text = make_battler_state_text(enemy, 0, false)
if state_text != ""
text += " " + state_text
end
set_text(text, 1)
@data=nil
end
#--------------------------------------------------------------------------
# ● 设置角色
# actor : 要显示状态的角色
#--------------------------------------------------------------------------
def set_actor(actor)
if actor != @actor
self.width = 640
self.height = 64
self.x=0
self.y=0
self.contents = Bitmap.new(width - 32, height - 32)
self.contents.clear
self.contents.font.size=20
self.contents.font.color = normal_color
draw_actor_name(actor, 4, 0)
draw_actor_state(actor, 140, 0)
draw_actor_hp(actor, 284, 0)
draw_actor_sp(actor, 460, 0)
@actor = actor
@text = nil
self.visible = true
end
end
#--------------------------------------------------------------------------
# ● 校正帮助窗口位置
#--------------------------------------------------------------------------
def set_pos(x,y,width,oy,index,column_max)
#光标坐标
cursor_width = width / column_max - 32
xx = index % column_max * (cursor_width + 32)
yy = index / column_max * 32 - oy
self.x=xx+x+150
self.y=yy+y+30
if self.x+self.width>640
self.x=640-self.width
end
if self.y+self.height>480
self.y=480-self.height
end
end
end
class Window_Help < Window_Base
#--------------------------------------------------------------------------
# ● 物品帮助窗口
#--------------------------------------------------------------------------
def set_item_text(item)
@item=item
description=""
[email protected]
x=0
y=0
# 取得屬性、附加狀態、解除狀態之副本
element_set = @item.element_set.clone
plus_state_set = @item.plus_state_set.clone
minus_state_set = @item.minus_state_set.clone
# 過濾不顯示的描述
element_set -= UNSHOW_ELEMENT
plus_state_set -= UNSHOW_STATE
minus_state_set -= UNSHOW_STATE
height=1 #依要显示的内容确定高
#由描叙确定高
height+=description.size/3/10
if description.size%10!=0
height+=1
end
height+=3 #空行，效果范围，价格
if @item.recover_hp_rate!=0 #HP 回复率。
height+=1
end
if @item.recover_hp!=0 #HP 回复量。
height+=1
end
if @item.recover_sp_rate!=0 #SP 回复率。
height+=1
end
if @item.recover_sp!=0 #SP 回复量。
height+=1
end
if @item.parameter_type!=0 #增加能力值
height+=1
end
if element_set.empty?!=true #属性。为属性 ID 的数组
height+=1
end
if plus_state_set.empty?!=true #附加状态。为状态 ID 的数组
height+=plus_state_set.size
end
if minus_state_set.empty?!=true #解除状态。为状态 ID 的数组
height+=minus_state_set.size
end
self.height=height*15+40+15
self.contents = Bitmap.new(self.width - 32,self.height - 32)
self.contents.clear
#描绘名字
[email protected]
self.contents.font.color =text_color(3)
self.contents.font.size=18
if text!=nil
self.visible = true
self.contents.draw_text(0,0, @item.name.size*7, 20, text, 0)
else
self.visible = false
end
x=0
y+=1
text=description
#描绘描叙
while ((text = description.slice!(/./m)) != nil)
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x*15, y*15+5, 14, 14, text, 0)
x+=1
if x==10#每行10个字
x=0
y+=1
end
end
#由特技属性确定高
#效果范围
scope = {0=>"特殊物品",1=>"敌单体",2=>"敌全体",3=>"己方单体",4=>"己方全体",5=>"己方昏死单体",6=>"己方昏死全体",7=>"使用者"}#HASH表
text="范围："+scope[@item.scope]
x=0
y+=2 #空一行
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
#价格
x=0
y+=1
text="价格："[email protected]_s
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
#HP 回复率
if @item.recover_hp_rate!=0
x=0
y+=1
text="回复气血："[email protected]_hp_rate.to_s+"%"
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
#HP回复量
if @item.recover_hp!=0
x=0
y+=1
text="回复气血："[email protected]_hp.to_s
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
#SP 回复率
if @item.recover_sp_rate!=0
x=0
y+=1
text="回复魔法："[email protected]_sp_rate.to_s+"%"
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
#SP 回复量
if @item.recover_sp!=0
x=0
y+=1
text="回复魔法："[email protected]_sp.to_s
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
#增加能力值
if @item.parameter_type!=0
parameter_type={1=>"最大气血",2=>"最大魔法",3=>$data_system.words.str,4=>$data_system.words.dex,5=>$data_system.words.agi,6=>$data_system.words.int}
x=0
y+=1
if @item.parameter_points>0
text="增加："+parameter_type[@item.parameter_type]+" +"[email protected]_points.to_s
else
text="减少："+parameter_type[@item.parameter_type][email protected]_points.to_s
end
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
#物品属性
if element_set.empty?!=true #属性。为属性 ID 的数组
text="属性："
for i in 0...element_set.size
text+=$data_system.elements[element_set[i]]+" "
end
x=0
y+=1
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
#附加状态
if plus_state_set.empty?!=true #附加状态。为状态 ID 的数组
text="附加状态："
x=0
y+=1
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
y-=1
x+=text.size*5
for i in 0...plus_state_set.size
y+=1
text=$data_states[plus_state_set[i]].name
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
end
#解除状态
if minus_state_set.empty?!=true #解除状态。为状态 ID 的数组
text="解除状态："
x=0
y+=1
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
y-=1
x+=text.size*5
for i in 0...minus_state_set.size
y+=1
text=$data_states[minus_state_set[i]].name
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
end
end
end
class Window_Help < Window_Base
#--------------------------------------------------------------------------
# ● 武器帮助窗口
#--------------------------------------------------------------------------
def set_weapon_text(weapon)
@weapon=weapon
description=""
[email protected]
# 取得屬性、附加狀態、解除狀態之副本
element_set = @weapon.element_set.clone
plus_state_set = @weapon.plus_state_set.clone
minus_state_set = @weapon.minus_state_set.clone
# 過濾不顯示的描述
element_set -= UNSHOW_ELEMENT
plus_state_set -= UNSHOW_STATE
minus_state_set -= UNSHOW_STATE
x=0
y=0
height=1 #依要显示的内容确定高
#由描叙确定高
height+=description.size/3/10
if description.size%10!=0
height+=1
end
height+=4 #2个空行，攻击，价格
if @weapon.pdef!=0 #物理防御
height+=1
end
if @weapon.mdef!=0 #魔法防御
height+=1
end
if @weapon.str_plus!=0 #力量
height+=1
end
if @weapon.dex_plus!=0#体质
height+=1
end
if @weapon.agi_plus!=0#敏捷
height+=1
end
if @weapon.int_plus!=0 #智力
height+=1
end
if element_set.empty?!=true #属性。为属性 ID 的数组
height+=1
end
if plus_state_set.empty?!=true #附加状态。为状态 ID 的数组
height+=plus_state_set.size
end
if minus_state_set.empty?!=true #解除状态。为状态 ID 的数组
height+=minus_state_set.size
end
self.height=height*15+40+15
self.contents = Bitmap.new(self.width - 32,self.height - 32)
self.contents.clear
#描绘名字
[email protected]
self.contents.font.color = text_color(1)#颜色脚本
self.contents.font.size=18
if text!=nil
self.visible = true
self.contents.draw_text(0,0, @weapon.name.size*7, 20, text, 0)
else
self.visible = false
end
x=0
y+=1
text=description
#描绘描叙
while ((text = description.slice!(/./m)) != nil)
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x*15, y*15+5, 14, 14, text, 0)
x+=1
if x==10#每行10个字
x=0
y+=1
end
end
#由特技属性确定高
#攻击
x=0
y+=2 #空行
text="攻击："[email protected]_s
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
#价格
x=0
y+=1
text="价格："[email protected]_s
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
#耐久度
dur_set = @weapon.dur_set
dur = @weapon.dur
text = "耐久度: #{dur}"
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x-1, y*15+20, text.size*6, 14, text, 0)
if @weapon.pdef!=0 #物理防御
x=0
y+=1
text="物理防御："[email protected]_s
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
if @weapon.mdef!=0 #魔法防御
x=0
y+=1
text="魔法防御："[email protected]_s
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
#武器属性
if element_set.empty? != true #属性。为属性 ID 的数组
text="属性："
for i in 0...element_set.size
text+=$data_system.elements[element_set[i]]+" "
end
x=0
y+=1
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
#附加状态
if plus_state_set.empty? != true #附加状态。为状态 ID 的数组
text="附加状态："
x=0
y+=1
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
y-=1
x+=text.size*5
for i in 0...plus_state_set.size
y+=1
text=$data_states[plus_state_set[i]].name
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
end
#解除状态
if minus_state_set.empty? != true #解除状态。为状态 ID 的数组
text="解除状态："
x=0
y+=1
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
y-=1
x+=text.size*5
for i in 0...minus_state_set.size
y+=1
text=$data_states[minus_state_set[i]].name
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
end
y+=1 #空行
if @weapon.str_plus!=0 #力量
x=0
y+=1
if @weapon.str_plus > 0
text=$data_system.words.str+" + "[email protected]_plus.to_s
else
[email protected]_plus
text=$data_system.words.str+" - "+str_minus.to_s
end
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
if @weapon.dex_plus!=0#体质
x=0
y+=1
if @weapon.dex_plus > 0
text=$data_system.words.dex+" + "[email protected]_plus.to_s
else
[email protected]_plus
text=$data_system.words.dex+" - "+dex_minus.to_s
end
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
if @weapon.agi_plus!=0#敏捷
x=0
y+=1
if @weapon.agi_plus > 0
text=$data_system.words.agi+" + "[email protected]_plus.to_s
else
[email protected]_plus
text=$data_system.words.agi+" - "+agi_minus.to_s
end
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
if @weapon.int_plus!=0 #智力
x=0
y+=1
if @weapon.int_plus > 0
text=$data_system.words.int+" + "[email protected]_plus.to_s
else
[email protected]_plus
text=$data_system.words.int+" - "+int_minus.to_s
end
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
end
end
class Window_Help < Window_Base
#--------------------------------------------------------------------------
# ● 防具帮助窗口
#--------------------------------------------------------------------------
def set_armor_text(armor)
@armor=armor
description=""
[email protected]
# 取得屬性、附加狀態、解除狀態之副本
element_set = @armor.guard_element_set.clone
guard_state_set = @armor.guard_state_set.clone
# 過濾不顯示的描述
element_set -= UNSHOW_ELEMENT
guard_state_set -= UNSHOW_STATE
x=0
y=0
height=1 #依要显示的内容确定高
#由描叙确定高
height+=description.size/3/10
if description.size%10 !=0
height+=1
end
height+=2 #2个空行，价格
if @armor.pdef !=0 #物理防御
height+=1
end
if @armor.mdef !=0 #魔法防御
height+=1
end
if @armor.str_plus !=0 #力量
height+=1
end
if @armor.dex_plus !=0#体质
height+=1
end
if @armor.agi_plus !=0#敏捷
height+=1
end
if @armor.int_plus !=0 #智力
height+=1
end
if element_set.empty? != true #属性防御。为属性 ID 的数组
height+=1
end
if guard_state_set.empty? != true #状态防御。为状态 ID 的数组
height+=guard_state_set.size
end
self.height=height*16+70
self.contents = Bitmap.new(self.width - 32,self.height - 32)
self.contents.clear
#描绘名字
[email protected]
self.contents.font.color = text_color(1)#颜色脚本
self.contents.font.size=18
if text!=nil
self.visible = true
self.contents.draw_text(0,0, @armor.name.size*7, 20, text, 0)
else
self.visible = false
end
x=0
y+=1
text=description
#描绘描叙
while ((text = description.slice!(/./m)) != nil)
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x*15, y*15+5, 14, 14, text, 0)
x+=1
if x==10#每行10个字
x=0
y+=1
end
end
#由特技属性确定高
#价格
x=0
y+=2#空行
text="价格："[email protected]_s
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
x=0
y+=1
#耐久度
dur_set = @weapon.dur_set
dur = @weapon.dur
text = "耐久度: #{dur}"
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x-1, y*15+35, text.size*6, 14, text, 0)
if @armor.pdef!=0 #物理防御
text="物理防御："[email protected]_s
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
x=0
y+=1
end
if @armor.mdef!=0 #魔法防御
text="魔法防御："[email protected]_s
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
x=0
y+=1
end
#属性防御
if element_set.empty? !=true #属性。为属性 ID 的数组
text="属性防御："
for i in 0...element_set.size
text+=$data_system.elements[element_set[i]]+" "
end
x=0
y+=1
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
#状态防御
if guard_state_set.empty?!=true #附加状态。为状态 ID 的数组
text="状态防御："
x=0
y+=1
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
y-=1
x+=text.size*5
for i in 0...guard_state_set.size
y+=1
text=$data_states[guard_state_set[i]].name
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
end
# y+=1 #空行
if @armor.str_plus!=0 #力量
x=0
y+=1
if @armor.str_plus > 0
text=$data_system.words.str+" + "[email protected]_plus.to_s
else
[email protected]_plus
text=$data_system.words.str+" - "+str_minus.to_s
end
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
if @armor.dex_plus!=0#体质
x=0
y+=1
if @armor.dex_plus > 0
text=$data_system.words.dex+" + "[email protected]_plus.to_s
else
[email protected]_plus
text=$data_system.words.dex+" - "+dex_minus.to_s
end
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
if @armor.agi_plus!=0#敏捷
x=0
y+=1
if @armor.agi_plus > 0
text=$data_system.words.agi+" + "[email protected]_plus.to_s
else
[email protected]_plus
text=$data_system.words.agi+" - "+agi_minus.to_s
end
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
if @armor.int_plus!=0 #智力
x=0
y+=1
if @armor.int_plus > 0
text=$data_system.words.int+" + "[email protected]_plus.to_s
else
[email protected]_plus
text=$data_system.words.int+" - "+int_minus.to_s
end
self.contents.font.color = text_color(6)#颜色脚本
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
end
end
class Window_Help < Window_Base
#--------------------------------------------------------------------------
# ● 技能帮助窗口
#--------------------------------------------------------------------------
def set_skill_text(skill)
@skill=skill
description=""
[email protected]
# 取得屬性、附加狀態、解除狀態之副本
element_set = @skill.element_set.clone
plus_state_set = @skill.plus_state_set.clone
minus_state_set = @skill.minus_state_set.clone
# 過濾不顯示的描述
element_set -= UNSHOW_ELEMENT
plus_state_set -= UNSHOW_STATE
minus_state_set -= UNSHOW_STATE
x=0
y=0
height=1 #依要显示的内容确定高
#由描叙确定高
height+=description.size/3/10
if description.size%10!=0
height+=1
end
height+=4 #空行，效果范围，消费SP，命中率
if @skill.power!=0 #威力，威力为0，则可能为状态魔法
height+=1
end
if element_set.empty?!=true #属性。为属性 ID 的数组
height+=1
end
if plus_state_set.empty?!=true #附加状态。为状态 ID 的数组
height+=plus_state_set.size
end
if minus_state_set.empty?!=true #解除状态。为状态 ID 的数组
height+=minus_state_set.size
end
self.height=height*15+40+15
self.contents = Bitmap.new(self.width - 32,self.height - 32)
self.contents.clear
#描绘名字
[email protected]
self.contents.font.color =text_color(6)
self.contents.font.size=18
if text!=nil
self.visible = true
self.contents.draw_text(0,0, @skill.name.size*7, 20, text, 0)
else
self.visible = false
end
x=0
y+=1
text=description
#描绘描叙
while ((text = description.slice!(/./m)) != nil)
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x*15, y*15+5, 14, 14, text, 0)
x+=1
text
if x==10#每行10个字
x=0
y+=1
end
end
#由特技属性确定高
#效果范围
scope = {0=>"特殊技能",1=>"敌单体",2=>"敌全体",3=>"己方单体",4=>"己方全体",5=>"己方昏死单体",6=>"己方昏死全体",7=>"使用者"}#HASH表
text="范围："+scope[@skill.scope]
x=0
y+=2 #空一行
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
#威力
if @skill.power!=0
x=0
y+=1
[email protected] > 0 ? @skill.power : -1* @skill.power
text="威力："+c.to_s
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
#描绘消费SP
x=0
y+=1
text="消耗SP："[email protected]_cost.to_s
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
#命中率
x=0
y+=1
text="命中率："[email protected]_s+"%"
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
#攻击属性
if element_set.empty? != true #属性。为属性 ID 的数组
text="属性："
for i in 0...element_set.size
text+=$data_system.elements[element_set[i]]+" "
end
x=0
y+=1
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
#附加状态
if plus_state_set.empty? != true #附加状态。为状态 ID 的数组
text="附加状态："
x=0
y+=1
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
y-=1
x+=text.size*5
for i in 0...plus_state_set.size
y+=1
text=$data_states[plus_state_set[i]].name
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
end
#解除状态
if minus_state_set.empty? != true #解除状态。为状态 ID 的数组
text="解除状态："
x=0
y+=1
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
y-=1
x+=text.size*5
for i in 0...minus_state_set.size
y+=1
text=$data_states[minus_state_set[i]].name
self.contents.font.color = normal_color
self.contents.font.size=14
self.contents.draw_text(x, y*15+5, text.size*6, 14, text, 0)
end
end
end
end
class Window_Item < Window_Selectable
#--------------------------------------------------------------------------
# ● 刷新帮助文本
#--------------------------------------------------------------------------
def update_help
# @help_window.set_text(self.item == nil ? "" : self.item.description)
@help_window.set_text(item)
#校正帮助窗口位置
@help_window.set_pos(self.x,self.y,self.width,self.oy,self.index,@column_max)
end
end
class Window_Skill < Window_Selectable
#--------------------------------------------------------------------------
# ● 刷新帮助文本
#--------------------------------------------------------------------------
def update_help
# @help_window.set_text(self.skill == nil ? "" : self.skill.description)
@help_window.set_text(skill)
#校正帮助窗口位置
@help_window.set_pos(self.x,self.y,self.width,self.oy,self.index,@column_max)
end
end
class Window_EquipRight < Window_Selectable
def update_help
# @help_window.set_text(self.item == nil ? "" : self.item.description)
@help_window.set_text(item)
#校正帮助窗口位置
@help_window.set_pos(self.x,self.y,self.width,self.oy,self.index,@column_max)
end
end
class Window_EquipItem < Window_Selectable
def update_help
# @help_window.set_text(self.item == nil ? "" : self.item.description)
@help_window.set_text(item)
#校正帮助窗口位置
@help_window.set_pos(self.x,self.y,self.width,self.oy,self.index,@column_max)
end
end
class Window_ShopBuy < Window_Selectable
def update_help
@help_window.set_text(item)
#校正帮助窗口位置
@help_window.set_pos(self.x,self.y,self.width,self.oy,self.index,@column_max)
end
end
class Window_ShopSell < Window_Selectable
def update_help
@help_window.set_text(item)
#校正帮助窗口位置
@help_window.set_pos(self.x,self.y,self.width,self.oy,self.index,@column_max)
end
end

复制代码

class Game_Party
def gain_weapon(weapon_id, n)
if weapon_id > 0
# 装备栏中卸下的武器和物品栏里卸下的武器不进行随机处理~
if $scene.is_a?(Scene_Equip)or$scene.is_a?(Scene_Item)
@weapons[weapon_id] = [[weapon_number(weapon_id) + n, 0].max, 99].min
else
# 随机浮动范围~
add_atk = rand(50)-25
if add_atk == 0
@weapons[weapon_id] = [[weapon_number(weapon_id) + n, 0].max, 99].min
else
now = 0
# 判断数据库中是否已经有相同属性的武器~
for i in weapon_id...$data_weapons.size
if $data_weapons[i].atk == $data_weapons[weapon_id].atk+add_atk and
($data_weapons[i].name.split('+')[0] == $data_weapons[weapon_id].name or $data_weapons[i].name.split('-')[0] == $data_weapons[weapon_id].name)
now = i
break
end end
if now == 0
# 无相同属性时则重新生成~
new_weapon = $data_weapons[weapon_id].clone
new_weapon.id = $data_weapons.size
if add_atk<0
new_weapon.name = $data_weapons[weapon_id].name+" 破烂"
if add_atk<10
new_weapon.name = $data_weapons[weapon_id].name+" 粗糙"
end
else
if add_atk<10
new_weapon.name = $data_weapons[weapon_id].name+" 精良"
else
new_weapon.name = $data_weapons[weapon_id].name+" 极品"
end
end
new_weapon.atk = $data_weapons[weapon_id].atk+add_atk
$data_weapons.push(new_weapon)
# 职业可装备武器数组更新~
for i in 1...$data_classes.size
if $data_classes[i].weapon_set.include?(weapon_id)
$data_classes[i].weapon_set.push(new_weapon.id)
end
end
# 增加武器~
@weapons[new_weapon.id] = [[weapon_number(new_weapon.id) + n, 0].max, 99].min
else
# 有相同属性则直接增加武器~
@weapons[now] = [[weapon_number(now) + n, 0].max, 99].min
end
end
end
end
end
def lose_weapon(weapon_id, n)
if weapon_id > 0
@weapons[weapon_id] = [[weapon_number(weapon_id) - n, 0].max, 99].min
end
end
end

复制代码

u566 · 发表于 2011-3-13 12:38:37

本帖最后由 u566 于 2011-3-13 12:40 编辑

回复 qaz4633063 的帖子

我看过你的工程了，我的工程用的是KKME系统
KKME系统重定义过windows_help
现在找不到脚本了
我工程太大发不上来
算了吧
其实主要应该是耐久度和KKME系统冲突

qaz4633063 · 发表于 2011-3-13 04:09:07

提示: 作者被禁止或删除内容自动屏蔽

u566 · 发表于 2011-3-12 11:33:35

回复 qaz4633063 的帖子

当装备没有损坏时打开装备修复界面就悲剧了

qaz4633063 · 发表于 2011-3-12 05:48:20

提示: 作者被禁止或删除内容自动屏蔽

u566 · 发表于 2011-3-11 22:54:22

本帖最后由 u566 于 2011-3-11 22:58 编辑

回复 qaz4633063 的帖子

我主要想改的是装备修复界面，脚本和在一起不正常

[

qaz4633063 · 发表于 2011-3-6 22:16:42

提示: 作者被禁止或删除内容自动屏蔽

u566 · 发表于 2011-3-6 18:41:07

再次人工置顶
前辈们，帮帮我

u566 · 发表于 2011-3-6 10:50:44

人工置顶
没人么

帐号		自动登录	找回密码
密码			注册会员

[已经过期] 能不能整合耐久度脚本

点评