千古一帝 发表于 2013-4-22 13:38
不知能否就像上面的vx脚本一样直接给guage一个框的定义。

这个没有，不过多画一个形状不难吧。
而且色彩和形状都可以自定。

千古一帝 发表于 2013-4-22 13:38
不知能否就像上面的vx脚本一样直接给guage一个框的定义。

这个没有，不过多画一个矩形不难吧。

hcm 发表于 2013-4-22 13:30
那就这个吧。
图片为Gauge+HP/MP/TP
不过需要在同一图片的下半部画上血条本身的形状，值槽框在上半部。 ...

不知能否就像上面的vx脚本一样直接给guage一个框的定义。

那就这个吧。
图片为Gauge+HP/MP/TP
不过需要在同一图片的下半部画上血条本身的形状，值槽框在上半部。

1. #_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
   
2. #_/    ◆ Draw Generic Gauge - KMS_GenericGauge ◆ VX Ace ◆
   
3. #_/    ◇ Last update : 2012/01/15 (TOMY@Kamesoft) ◇
   
4. #_/    ◇ Website: http://ytomy.sakura.ne.jp/ ◇
   
5. #_/    ◇ Translated by Mr. Bubble ◇
   
6. #_/----------------------------------------------------------------------------
   
7. #_/  Provides groundwork code for simple image-based gauges.
   
8. #_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
   
9. #  This script provides groundwork code for simple gauge graphics based
   
10. #  off images placed in the Graphics/System folder. By default, this script
    
11. #  provides gauges for HP, MP, TP, and EXP.
    
12. #
    
13. #  Scripters can utilize their own Generic Gauge for their
    
14. #  own use. See the "Notes to Scripters" section below the customization
    
15. #  section.
    
16. #----------------------------------------------------------------------------
    
17. #  !! WARNING !!
    
18. #  If an error pops up saying "wrong number of arguments",
    
19. #  please post in the topic you got this script in and ask for a
    
20. #  compatibility patch with the other custom script you're trying to
    
21. #  use.
    
22. #_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
    
23. 
    
24. #==============================================================================
    
25. # ★ BEGIN Setting ★
    
26. #==============================================================================
    
27. 
    
28. module KMS_GenericGauge
    
29.   # * Gauge File Names
    
30.   #   Images must be placed in the "Graphics/System" folder of your project
    
31.   HP_IMAGE  = "GaugeHP"   # HP
    
32.   MP_IMAGE  = "GaugeMP"   # MP
    
33.   TP_IMAGE  = "GaugeTP"   # TP
    
34.   EXP_IMAGE = "GaugeEXP"  # EXP
    
35. 
    
36.   # * Gauge Position Offset [x, y]
    
37.   HP_OFFSET  = [-23, -2]  # HP
    
38.   MP_OFFSET  = [-23, -2]  # MP
    
39.   TP_OFFSET  = [-23, -2]  # TP
    
40.   EXP_OFFSET = [-23, -2]  # EXP
    
41. 
    
42.   # * Gauge Length Adjustment
    
43.   HP_LENGTH  = -4  # HP
    
44.   MP_LENGTH  = -4  # MP
    
45.   TP_LENGTH  = -4  # TP
    
46.   EXP_LENGTH = -4  # EXP
    
47. 
    
48.   # * Gauge Slope
    
49.   #   Must be between -89 ~ 89 degrees
    
50.   HP_SLOPE  = 30  # HP
    
51.   MP_SLOPE  = 30  # MP
    
52.   TP_SLOPE  = 30  # TP
    
53.   EXP_SLOPE = 30  # EXP
    
54. end
    
55. 
    
56. #==============================================================================
    
57. # ☆ END Setting ☆
    
58. #==============================================================================
    
59. 
    
60. $kms_imported = {} if $kms_imported == nil
    
61. $kms_imported["GenericGauge"] = true
    
62. 
    
63. # *****************************************************************************
    
64. 
    
65.   #--------------------------------------------------------------------------
    
66.   # Notes to Scripters
    
67.   #--------------------------------------------------------------------------
    
68.   # Drawing your own custom gauge within a window can be done by using a single
    
69.   # method:
    
70.   #
    
71.   #   draw_gauge(file, x, y, width, rate, offset, len_offset,
    
72.   #     slope, gauge_type = :normal)
    
73.   #
    
74.   # ++ Draw Generic Gauge Arguments
    
75.   #     file       : Gauge image filename
    
76.   #     x, y       : x, y draw coordinates
    
77.   #     width      : Gauge width
    
78.   #     rate       : Gauge fill ratio (0.0 ~ 1.0)
    
79.   #     offset     : Gauge coordinate adjustment [x, y]
    
80.   #     len_offset : Length Adjustment
    
81.   #     slope      : Gauge slope degree (-89~89)
    
82.   #     gauge_type : Gauge type ( :normal , :decrease , :increase )
    
83.   #--------------------------------------------------------------------------
    
84.   # gauge_type determines how the gauge fills depending on the current
    
85.   # value of the gauge.
    
86.   #--------------------------------------------------------------------------
    
87.   # This script overwrites Window_Base#draw_gauge and adds 2 extra args
    
88.   # which will cause compatibility issues with other scripts that uses
    
89.   # the default draw_gauge method and args.
    
90.   #--------------------------------------------------------------------------
    
91. 
    
92. #==============================================================================
    
93. # ■ Bitmap
    
94. #==============================================================================
    
95. 
    
96. unless $kms_imported["BitmapExtension"]
    
97. class Bitmap
    
98.   #--------------------------------------------------------------------------
    
99.   # ○ 平行四辺形転送
    
100.   #--------------------------------------------------------------------------
     
101.   def skew_blt(x, y, src_bitmap, src_rect, slope, opacity = 255)
     
102.     slope = [[slope, -90].max, 90].min
     
103.     sh    = src_rect.height
     
104.     off  = sh / Math.tan(Math::PI * (90 - slope.abs) / 180.0)
     
105.     if slope >= 0
     
106.       dx   = x + off.round
     
107.       diff = -off / sh
     
108.     else
     
109.       dx   = x
     
110.       diff = off / sh
     
111.     end
     
112.     rect = Rect.new(src_rect.x, src_rect.y, src_rect.width, 1)
     
113. 
     
114.     sh.times { |i|
     
115.       blt(dx + (diff * i).round, y + i, src_bitmap, rect, opacity)
     
116.       rect.y += 1
     
117.     }
     
118.   end
     
119. end
     
120. end
     
121. 
     
122. #==============================================================================
     
123. # ■ Game_Actor
     
124. #==============================================================================
     
125. 
     
126. class Game_Actor < Game_Battler
     
127.   #--------------------------------------------------------------------------
     
128.   # ○ 現在のレベルから次のレベルまでの全必要経験値取得
     
129.   #--------------------------------------------------------------------------
     
130.   def next_level_exp_full
     
131.     return next_level_exp - current_level_exp
     
132.   end
     
133.   #--------------------------------------------------------------------------
     
134.   # ○ 次のレベルまでの残り経験値取得
     
135.   #--------------------------------------------------------------------------
     
136.   def next_level_exp_rest
     
137.     return next_level_exp - exp
     
138.   end
     
139.   #--------------------------------------------------------------------------
     
140.   # ○ 次のレベルまでの経験値取得率取得
     
141.   #--------------------------------------------------------------------------
     
142.   def exp_rate
     
143.     diff = [next_level_exp_full, 1].max
     
144.     rest = [next_level_exp_rest, 1].max
     
145.     return (diff - rest) * 1.0 / diff
     
146.   end
     
147. end
     
148. 
     
149. #==============================================================================
     
150. # ■ Window_Base
     
151. #==============================================================================
     
152. 
     
153. class Window_Base < Window
     
154.   #--------------------------------------------------------------------------
     
155.   # ○ 定数
     
156.   #--------------------------------------------------------------------------
     
157.   # ゲージ転送元座標 [x, y]
     
158.   GAUGE_SRC_POS = {
     
159.     :normal   => [ 0, 24],
     
160.     :decrease => [ 0, 48],
     
161.     :increase => [72, 48],
     
162.   }
     
163.   #--------------------------------------------------------------------------
     
164.   # ○ クラス変数
     
165.   #--------------------------------------------------------------------------
     
166.   @@__gauge_buf = Bitmap.new(320, 24)
     
167.   #--------------------------------------------------------------------------
     
168.   # ○ ゲージ描画
     
169.   #     file       : ゲージ画像ファイル名
     
170.   #     x, y       : 描画先 X, Y 座標
     
171.   #     width      : 幅
     
172.   #     ratio      : 割合
     
173.   #     offset     : 座標調整 [x, y]
     
174.   #     len_offset : 長さ調整
     
175.   #     slope      : 傾き
     
176.   #     gauge_type : ゲージタイプ
     
177.   #--------------------------------------------------------------------------
     
178.   def draw_gauge(file, x, y, width, ratio, offset, len_offset, slope,
     
179.                  gauge_type = :normal)
     
180.     img    = Cache.system(file)
     
181.     x     += offset[0]
     
182.     y     += offset[1]
     
183.     width += len_offset
     
184.     draw_gauge_base(img, x, y, width, slope)
     
185.     gw = (width * ratio).to_i
     
186.     draw_gauge_bar(img, x, y, width, gw, slope, GAUGE_SRC_POS[gauge_type])
     
187.   end
     
188.   #--------------------------------------------------------------------------
     
189.   # ○ ゲージベース描画
     
190.   #     img   : ゲージ画像
     
191.   #     x, y  : 描画先 X, Y 座標
     
192.   #     width : 幅
     
193.   #     slope : 傾き
     
194.   #--------------------------------------------------------------------------
     
195.   def draw_gauge_base(img, x, y, width, slope)
     
196.     rect = Rect.new(0, 0, 24, 24)
     
197.     if slope != 0
     
198.       contents.skew_blt(x, y, img, rect, slope)
     
199.       rect.x = 96
     
200.       contents.skew_blt(x + width + 24, y, img, rect, slope)
     
201.       rect.x     = 24
     
202.       rect.width = 72
     
203.       dest_rect = Rect.new(0, 0, width, 24)
     
204.       @@__gauge_buf.clear
     
205.       @@__gauge_buf.stretch_blt(dest_rect, img, rect)
     
206.       contents.skew_blt(x + 24, y, @@__gauge_buf, dest_rect, slope)
     
207.     else
     
208.       contents.blt(x, y, img, rect)
     
209.       rect.x = 96
     
210.       contents.blt(x + width + 24, y, img, rect)
     
211.       rect.x     = 24
     
212.       rect.width = 72
     
213.       dest_rect = Rect.new(x + 24, y, width, 24)
     
214.       contents.stretch_blt(dest_rect, img, rect)
     
215.     end
     
216.   end
     
217.   #--------------------------------------------------------------------------
     
218.   # ○ ゲージ内部描画
     
219.   #     img     : ゲージ画像
     
220.   #     x, y    : 描画先 X, Y 座標
     
221.   #     width   : 全体幅
     
222.   #     gw      : 内部幅
     
223.   #     slope   : 傾き
     
224.   #     src_pos : 転送元座標 [x, y]
     
225.   #     start   : 開始位置
     
226.   #--------------------------------------------------------------------------
     
227.   def draw_gauge_bar(img, x, y, width, gw, slope, src_pos, start = 0)
     
228.     rect = Rect.new(src_pos[0], src_pos[1], 72, 24)
     
229.     dest_rect = Rect.new(0, 0, width, 24)
     
230.     @@__gauge_buf.clear
     
231.     @@__gauge_buf.stretch_blt(dest_rect, img, rect)
     
232.     dest_rect.x     = start
     
233.     dest_rect.width = gw
     
234.     x += start
     
235.     if slope != 0
     
236.       contents.skew_blt(x + 24, y, @@__gauge_buf, dest_rect, slope)
     
237.     else
     
238.       contents.blt(x + 24, y, @@__gauge_buf, dest_rect)
     
239.     end
     
240.   end
     
241.   #--------------------------------------------------------------------------
     
242.   # ● HP の描画
     
243.   #--------------------------------------------------------------------------
     
244.   def draw_actor_hp(actor, x, y, width = 124)
     
245.     draw_actor_hp_gauge(actor, x, y, width)
     
246.     change_color(system_color)
     
247.     draw_text(x, y, 60, line_height, Vocab::hp_a)
     
248.     draw_current_and_max_values(x, y, width, actor.hp, actor.mhp,
     
249.       hp_color(actor), normal_color)
     
250.   end
     
251.   #--------------------------------------------------------------------------
     
252.   # ● MP の描画
     
253.   #--------------------------------------------------------------------------
     
254.   def draw_actor_mp(actor, x, y, width = 124)
     
255.     draw_actor_mp_gauge(actor, x, y, width)
     
256.     change_color(system_color)
     
257.     draw_text(x, y, 60, line_height, Vocab::mp_a)
     
258.     draw_current_and_max_values(x, y, width, actor.mp, actor.mmp,
     
259.       mp_color(actor), normal_color)
     
260.   end
     
261.   #--------------------------------------------------------------------------
     
262.   # ● TP の描画
     
263.   #--------------------------------------------------------------------------
     
264.   def draw_actor_tp(actor, x, y, width = 124)
     
265.     draw_actor_tp_gauge(actor, x, y, width)
     
266.     change_color(system_color)
     
267.     draw_text(x, y, 60, line_height, Vocab::tp_a)
     
268.     change_color(tp_color(actor))
     
269.     draw_text(x + width - 42, y, 42, line_height, actor.tp.to_i, 2)
     
270.   end
     
271.   #--------------------------------------------------------------------------
     
272.   # ○ HP ゲージの描画
     
273.   #     actor : アクター
     
274.   #     x, y  : 描画先 X, Y 座標
     
275.   #     width : 幅
     
276.   #--------------------------------------------------------------------------
     
277.   def draw_actor_hp_gauge(actor, x, y, width = 120)
     
278.     draw_gauge(KMS_GenericGauge::HP_IMAGE,
     
279.       x, y, width, actor.hp_rate,
     
280.       KMS_GenericGauge::HP_OFFSET,
     
281.       KMS_GenericGauge::HP_LENGTH,
     
282.       KMS_GenericGauge::HP_SLOPE
     
283.     )
     
284.   end
     
285.   #--------------------------------------------------------------------------
     
286.   # ○ MP ゲージの描画
     
287.   #     actor : アクター
     
288.   #     x, y  : 描画先 X, Y 座標
     
289.   #     width : 幅
     
290.   #--------------------------------------------------------------------------
     
291.   def draw_actor_mp_gauge(actor, x, y, width = 120)
     
292.     draw_gauge(KMS_GenericGauge::MP_IMAGE,
     
293.       x, y, width, actor.mp_rate,
     
294.       KMS_GenericGauge::MP_OFFSET,
     
295.       KMS_GenericGauge::MP_LENGTH,
     
296.       KMS_GenericGauge::MP_SLOPE
     
297.     )
     
298.   end
     
299.   #--------------------------------------------------------------------------
     
300.   # ○ TP ゲージの描画
     
301.   #     actor : アクター
     
302.   #     x, y  : 描画先 X, Y 座標
     
303.   #     width : 幅
     
304.   #--------------------------------------------------------------------------
     
305.   def draw_actor_tp_gauge(actor, x, y, width = 120)
     
306.     draw_gauge(KMS_GenericGauge::TP_IMAGE,
     
307.       x, y, width, actor.tp_rate,
     
308.       KMS_GenericGauge::TP_OFFSET,
     
309.       KMS_GenericGauge::TP_LENGTH,
     
310.       KMS_GenericGauge::TP_SLOPE
     
311.     )
     
312.   end
     
313.   #--------------------------------------------------------------------------
     
314.   # ○ Exp の描画
     
315.   #     actor : アクター
     
316.   #     x, y  : 描画先 X, Y 座標
     
317.   #     width : 幅
     
318.   #--------------------------------------------------------------------------
     
319.   def draw_actor_exp(actor, x, y, width = 200)
     
320.     str = actor.max_level? ? "-------" : actor.exp
     
321.     change_color(normal_color)
     
322.     draw_text(x, y, width, line_height, str, 2)
     
323.   end
     
324.   #--------------------------------------------------------------------------
     
325.   # ○ NextExp の描画
     
326.   #     actor : アクター
     
327.   #     x, y  : 描画先 X, Y 座標
     
328.   #     width : 幅
     
329.   #--------------------------------------------------------------------------
     
330.   def draw_actor_next_exp(actor, x, y, width = 200)
     
331.     draw_actor_exp_gauge(actor, x, y, width)
     
332.     change_color(system_color)
     
333.     draw_text(x, y, 80, line_height, "Next")
     
334.     str = actor.max_level? ? "-------" : actor.next_level_exp_rest
     
335.     change_color(normal_color)
     
336.     draw_text(x, y, width, line_height, str, 2)
     
337.   end
     
338.   #--------------------------------------------------------------------------
     
339.   # ○ Exp ゲージの描画
     
340.   #     actor : アクター
     
341.   #     x, y  : 描画先 X, Y 座標
     
342.   #     width : 幅
     
343.   #--------------------------------------------------------------------------
     
344.   def draw_actor_exp_gauge(actor, x, y, width = 180)
     
345.     draw_gauge(KMS_GenericGauge::EXP_IMAGE,
     
346.       x, y, width, actor.exp_rate,
     
347.       KMS_GenericGauge::EXP_OFFSET,
     
348.       KMS_GenericGauge::EXP_LENGTH,
     
349.       KMS_GenericGauge::EXP_SLOPE
     
350.     )
     
351.   end
     
352. end
     
353. 
     
354. #==============================================================================
     
355. # ■ Window_Status
     
356. #==============================================================================
     
357. 
     
358. class Window_Status < Window_Selectable
     
359.   #--------------------------------------------------------------------------
     
360.   # ● 経験値情報の描画
     
361.   #--------------------------------------------------------------------------
     
362.   def draw_exp_info(x, y)
     
363.     s_next = sprintf(Vocab::ExpNext, Vocab::level)
     
364.     change_color(system_color)
     
365.     draw_text(x, y + line_height * 0, 180, line_height, Vocab::ExpTotal)
     
366.     draw_text(x, y + line_height * 2, 180, line_height, s_next)
     
367.     change_color(normal_color)
     
368.     draw_actor_exp(     @actor, x, y + line_height * 1)
     
369.     draw_actor_next_exp(@actor, x, y + line_height * 3)
     
370.   end
     
371. end
     

复制代码

图片的那个谁用的不错～不过用了以后和各种头像战斗脚本有冲突的～因为那些脚本都定义了血条的显示吧～（可能～）我也和你一样找了很久～最后也是放弃那个血条了～
http://rpg.blue/thread-223368-1-1.html  这个贴子里就用了图片血条～我也是这里下的～
其实我想要这个战斗脸图～可惜不论怎么搞也搞不下来～（谁让你什么脚本都不懂啊～！）
嗳～这个血条唯一的问题就是和各种定义了战斗脸图显示血量的冲突～要是不懂脚本看上去是无解了～

1. #_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
   
2. #_/    ◆ Draw Generic Gauge - KMS_GenericGauge ◆ VX Ace ◆
   
3. #_/    ◇ Last update : 2012/01/15 (TOMY@Kamesoft) ◇
   
4. #_/    ◇ Website: http://ytomy.sakura.ne.jp/ ◇
   
5. #_/    ◇ Translated by Mr. Bubble ◇
   
6. #_/----------------------------------------------------------------------------
   
7. #_/  Provides groundwork code for simple image-based gauges.
   
8. #_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
   
9. #  This script provides groundwork code for simple gauge graphics based
   
10. #  off images placed in the Graphics/System folder. By default, this script
    
11. #  provides gauges for HP, MP, TP, and EXP.
    
12. #
    
13. #  Scripters can utilize their own Generic Gauge for their
    
14. #  own use. See the "Notes to Scripters" section below the customization
    
15. #  section.
    
16. #----------------------------------------------------------------------------
    
17. #  !! WARNING !!
    
18. #  If an error pops up saying "wrong number of arguments",
    
19. #  please post in the topic you got this script in and ask for a
    
20. #  compatibility patch with the other custom script you're trying to
    
21. #  use.
    
22. #_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
    
23. 
    
24. #==============================================================================
    
25. # ★ BEGIN Setting ★
    
26. #==============================================================================
    
27. 
    
28. module KMS_GenericGauge
    
29.   # * Gauge File Names
    
30.   #   Images must be placed in the "Graphics/System" folder of your project
    
31.   HP_IMAGE  = "GaugeHP"   # HP
    
32.   MP_IMAGE  = "GaugeMP"   # MP
    
33.   TP_IMAGE  = "GaugeTP"   # TP
    
34.   EXP_IMAGE = "GaugeEXP"  # EXP
    
35. 
    
36.   # * Gauge Position Offset [x, y]
    
37.   HP_OFFSET  = [-23, -2]  # HP
    
38.   MP_OFFSET  = [-23, -2]  # MP
    
39.   TP_OFFSET  = [-23, -2]  # TP
    
40.   EXP_OFFSET = [-23, -2]  # EXP
    
41. 
    
42.   # * Gauge Length Adjustment
    
43.   HP_LENGTH  = -4  # HP
    
44.   MP_LENGTH  = -4  # MP
    
45.   TP_LENGTH  = -4  # TP
    
46.   EXP_LENGTH = -4  # EXP
    
47. 
    
48.   # * Gauge Slope
    
49.   #   Must be between -89 ~ 89 degrees
    
50.   HP_SLOPE  = 30  # HP
    
51.   MP_SLOPE  = 30  # MP
    
52.   TP_SLOPE  = 30  # TP
    
53.   EXP_SLOPE = 30  # EXP
    
54. end
    
55. 
    
56. #==============================================================================
    
57. # ☆ END Setting ☆
    
58. #==============================================================================
    
59. 
    
60. $kms_imported = {} if $kms_imported == nil
    
61. $kms_imported["GenericGauge"] = true
    
62. 
    
63. # *****************************************************************************
    
64. 
    
65.   #--------------------------------------------------------------------------
    
66.   # Notes to Scripters
    
67.   #--------------------------------------------------------------------------
    
68.   # Drawing your own custom gauge within a window can be done by using a single
    
69.   # method:
    
70.   #
    
71.   #   draw_gauge(file, x, y, width, rate, offset, len_offset,
    
72.   #     slope, gauge_type = :normal)
    
73.   #
    
74.   # ++ Draw Generic Gauge Arguments
    
75.   #     file       : Gauge image filename
    
76.   #     x, y       : x, y draw coordinates
    
77.   #     width      : Gauge width
    
78.   #     rate       : Gauge fill ratio (0.0 ~ 1.0)
    
79.   #     offset     : Gauge coordinate adjustment [x, y]
    
80.   #     len_offset : Length Adjustment
    
81.   #     slope      : Gauge slope degree (-89~89)
    
82.   #     gauge_type : Gauge type ( :normal , :decrease , :increase )
    
83.   #--------------------------------------------------------------------------
    
84.   # gauge_type determines how the gauge fills depending on the current
    
85.   # value of the gauge.
    
86.   #--------------------------------------------------------------------------
    
87.   # This script overwrites Window_Base#draw_gauge and adds 2 extra args
    
88.   # which will cause compatibility issues with other scripts that uses
    
89.   # the default draw_gauge method and args.
    
90.   #--------------------------------------------------------------------------
    
91. 
    
92. #==============================================================================
    
93. # ■ Bitmap
    
94. #==============================================================================
    
95. 
    
96. unless $kms_imported["BitmapExtension"]
    
97. class Bitmap
    
98.   #--------------------------------------------------------------------------
    
99.   # ○ 平行四辺形転送
    
100.   #--------------------------------------------------------------------------
     
101.   def skew_blt(x, y, src_bitmap, src_rect, slope, opacity = 255)
     
102.     slope = [[slope, -90].max, 90].min
     
103.     sh    = src_rect.height
     
104.     off  = sh / Math.tan(Math::PI * (90 - slope.abs) / 180.0)
     
105.     if slope >= 0
     
106.       dx   = x + off.round
     
107.       diff = -off / sh
     
108.     else
     
109.       dx   = x
     
110.       diff = off / sh
     
111.     end
     
112.     rect = Rect.new(src_rect.x, src_rect.y, src_rect.width, 1)
     
113. 
     
114.     sh.times { |i|
     
115.       blt(dx + (diff * i).round, y + i, src_bitmap, rect, opacity)
     
116.       rect.y += 1
     
117.     }
     
118.   end
     
119. end
     
120. end
     
121. 
     
122. #==============================================================================
     
123. # ■ Game_Actor
     
124. #==============================================================================
     
125. 
     
126. class Game_Actor < Game_Battler
     
127.   #--------------------------------------------------------------------------
     
128.   # ○ 現在のレベルから次のレベルまでの全必要経験値取得
     
129.   #--------------------------------------------------------------------------
     
130.   def next_level_exp_full
     
131.     return next_level_exp - current_level_exp
     
132.   end
     
133.   #--------------------------------------------------------------------------
     
134.   # ○ 次のレベルまでの残り経験値取得
     
135.   #--------------------------------------------------------------------------
     
136.   def next_level_exp_rest
     
137.     return next_level_exp - exp
     
138.   end
     
139.   #--------------------------------------------------------------------------
     
140.   # ○ 次のレベルまでの経験値取得率取得
     
141.   #--------------------------------------------------------------------------
     
142.   def exp_rate
     
143.     diff = [next_level_exp_full, 1].max
     
144.     rest = [next_level_exp_rest, 1].max
     
145.     return (diff - rest) * 1.0 / diff
     
146.   end
     
147. end
     
148. 
     
149. #==============================================================================
     
150. # ■ Window_Base
     
151. #==============================================================================
     
152. 
     
153. class Window_Base < Window
     
154.   #--------------------------------------------------------------------------
     
155.   # ○ 定数
     
156.   #--------------------------------------------------------------------------
     
157.   # ゲージ転送元座標 [x, y]
     
158.   GAUGE_SRC_POS = {
     
159.     :normal   => [ 0, 24],
     
160.     :decrease => [ 0, 48],
     
161.     :increase => [72, 48],
     
162.   }
     
163.   #--------------------------------------------------------------------------
     
164.   # ○ クラス変数
     
165.   #--------------------------------------------------------------------------
     
166.   @@__gauge_buf = Bitmap.new(320, 24)
     
167.   #--------------------------------------------------------------------------
     
168.   # ○ ゲージ描画
     
169.   #     file       : ゲージ画像ファイル名
     
170.   #     x, y       : 描画先 X, Y 座標
     
171.   #     width      : 幅
     
172.   #     ratio      : 割合
     
173.   #     offset     : 座標調整 [x, y]
     
174.   #     len_offset : 長さ調整
     
175.   #     slope      : 傾き
     
176.   #     gauge_type : ゲージタイプ
     
177.   #--------------------------------------------------------------------------
     
178.   def draw_gauge(file, x, y, width, ratio, offset, len_offset, slope,
     
179.                  gauge_type = :normal)
     
180.     img    = Cache.system(file)
     
181.     x     += offset[0]
     
182.     y     += offset[1]
     
183.     width += len_offset
     
184.     draw_gauge_base(img, x, y, width, slope)
     
185.     gw = (width * ratio).to_i
     
186.     draw_gauge_bar(img, x, y, width, gw, slope, GAUGE_SRC_POS[gauge_type])
     
187.   end
     
188.   #--------------------------------------------------------------------------
     
189.   # ○ ゲージベース描画
     
190.   #     img   : ゲージ画像
     
191.   #     x, y  : 描画先 X, Y 座標
     
192.   #     width : 幅
     
193.   #     slope : 傾き
     
194.   #--------------------------------------------------------------------------
     
195.   def draw_gauge_base(img, x, y, width, slope)
     
196.     rect = Rect.new(0, 0, 24, 24)
     
197.     if slope != 0
     
198.       contents.skew_blt(x, y, img, rect, slope)
     
199.       rect.x = 96
     
200.       contents.skew_blt(x + width + 24, y, img, rect, slope)
     
201.       rect.x     = 24
     
202.       rect.width = 72
     
203.       dest_rect = Rect.new(0, 0, width, 24)
     
204.       @@__gauge_buf.clear
     
205.       @@__gauge_buf.stretch_blt(dest_rect, img, rect)
     
206.       contents.skew_blt(x + 24, y, @@__gauge_buf, dest_rect, slope)
     
207.     else
     
208.       contents.blt(x, y, img, rect)
     
209.       rect.x = 96
     
210.       contents.blt(x + width + 24, y, img, rect)
     
211.       rect.x     = 24
     
212.       rect.width = 72
     
213.       dest_rect = Rect.new(x + 24, y, width, 24)
     
214.       contents.stretch_blt(dest_rect, img, rect)
     
215.     end
     
216.   end
     
217.   #--------------------------------------------------------------------------
     
218.   # ○ ゲージ内部描画
     
219.   #     img     : ゲージ画像
     
220.   #     x, y    : 描画先 X, Y 座標
     
221.   #     width   : 全体幅
     
222.   #     gw      : 内部幅
     
223.   #     slope   : 傾き
     
224.   #     src_pos : 転送元座標 [x, y]
     
225.   #     start   : 開始位置
     
226.   #--------------------------------------------------------------------------
     
227.   def draw_gauge_bar(img, x, y, width, gw, slope, src_pos, start = 0)
     
228.     rect = Rect.new(src_pos[0], src_pos[1], 72, 24)
     
229.     dest_rect = Rect.new(0, 0, width, 24)
     
230.     @@__gauge_buf.clear
     
231.     @@__gauge_buf.stretch_blt(dest_rect, img, rect)
     
232.     dest_rect.x     = start
     
233.     dest_rect.width = gw
     
234.     x += start
     
235.     if slope != 0
     
236.       contents.skew_blt(x + 24, y, @@__gauge_buf, dest_rect, slope)
     
237.     else
     
238.       contents.blt(x + 24, y, @@__gauge_buf, dest_rect)
     
239.     end
     
240.   end
     
241.   #--------------------------------------------------------------------------
     
242.   # ● HP の描画
     
243.   #--------------------------------------------------------------------------
     
244.   def draw_actor_hp(actor, x, y, width = 124)
     
245.     draw_actor_hp_gauge(actor, x, y, width)
     
246.     change_color(system_color)
     
247.     draw_text(x, y, 30, line_height, Vocab::hp_a)
     
248.     draw_current_and_max_values(x, y, width, actor.hp, actor.mhp,
     
249.       hp_color(actor), normal_color)
     
250.   end
     
251.   #--------------------------------------------------------------------------
     
252.   # ● MP の描画
     
253.   #--------------------------------------------------------------------------
     
254.   def draw_actor_mp(actor, x, y, width = 124)
     
255.     draw_actor_mp_gauge(actor, x, y, width)
     
256.     change_color(system_color)
     
257.     draw_text(x, y, 30, line_height, Vocab::mp_a)
     
258.     draw_current_and_max_values(x, y, width, actor.mp, actor.mmp,
     
259.       mp_color(actor), normal_color)
     
260.   end
     
261.   #--------------------------------------------------------------------------
     
262.   # ● TP の描画
     
263.   #--------------------------------------------------------------------------
     
264.   def draw_actor_tp(actor, x, y, width = 124)
     
265.     draw_actor_tp_gauge(actor, x, y, width)
     
266.     change_color(system_color)
     
267.     draw_text(x, y, 30, line_height, Vocab::tp_a)
     
268.     change_color(tp_color(actor))
     
269.     draw_text(x + width - 42, y, 42, line_height, actor.tp.to_i, 2)
     
270.   end
     
271.   #--------------------------------------------------------------------------
     
272.   # ○ HP ゲージの描画
     
273.   #     actor : アクター
     
274.   #     x, y  : 描画先 X, Y 座標
     
275.   #     width : 幅
     
276.   #--------------------------------------------------------------------------
     
277.   def draw_actor_hp_gauge(actor, x, y, width = 120)
     
278.     draw_gauge(KMS_GenericGauge::HP_IMAGE,
     
279.       x, y, width, actor.hp_rate,
     
280.       KMS_GenericGauge::HP_OFFSET,
     
281.       KMS_GenericGauge::HP_LENGTH,
     
282.       KMS_GenericGauge::HP_SLOPE
     
283.     )
     
284.   end
     
285.   #--------------------------------------------------------------------------
     
286.   # ○ MP ゲージの描画
     
287.   #     actor : アクター
     
288.   #     x, y  : 描画先 X, Y 座標
     
289.   #     width : 幅
     
290.   #--------------------------------------------------------------------------
     
291.   def draw_actor_mp_gauge(actor, x, y, width = 120)
     
292.     draw_gauge(KMS_GenericGauge::MP_IMAGE,
     
293.       x, y, width, actor.mp_rate,
     
294.       KMS_GenericGauge::MP_OFFSET,
     
295.       KMS_GenericGauge::MP_LENGTH,
     
296.       KMS_GenericGauge::MP_SLOPE
     
297.     )
     
298.   end
     
299.   #--------------------------------------------------------------------------
     
300.   # ○ TP ゲージの描画
     
301.   #     actor : アクター
     
302.   #     x, y  : 描画先 X, Y 座標
     
303.   #     width : 幅
     
304.   #--------------------------------------------------------------------------
     
305.   def draw_actor_tp_gauge(actor, x, y, width = 120)
     
306.     draw_gauge(KMS_GenericGauge::TP_IMAGE,
     
307.       x, y, width, actor.tp_rate,
     
308.       KMS_GenericGauge::TP_OFFSET,
     
309.       KMS_GenericGauge::TP_LENGTH,
     
310.       KMS_GenericGauge::TP_SLOPE
     
311.     )
     
312.   end
     
313.   #--------------------------------------------------------------------------
     
314.   # ○ Exp の描画
     
315.   #     actor : アクター
     
316.   #     x, y  : 描画先 X, Y 座標
     
317.   #     width : 幅
     
318.   #--------------------------------------------------------------------------
     
319.   def draw_actor_exp(actor, x, y, width = 180)
     
320.     str = actor.max_level? ? "-------" : actor.exp
     
321.     change_color(normal_color)
     
322.     draw_text(x, y, width, line_height, str, 2)
     
323.   end
     
324.   #--------------------------------------------------------------------------
     
325.   # ○ NextExp の描画
     
326.   #     actor : アクター
     
327.   #     x, y  : 描画先 X, Y 座標
     
328.   #     width : 幅
     
329.   #--------------------------------------------------------------------------
     
330.   def draw_actor_next_exp(actor, x, y, width = 180)
     
331.     draw_actor_exp_gauge(actor, x, y, width)
     
332.     change_color(system_color)
     
333.     draw_text(x, y, 80, line_height, "Next")
     
334.     str = actor.max_level? ? "-------" : actor.next_level_exp_rest
     
335.     change_color(normal_color)
     
336.     draw_text(x, y, width, line_height, str, 2)
     
337.   end
     
338.   #--------------------------------------------------------------------------
     
339.   # ○ Exp ゲージの描画
     
340.   #     actor : アクター
     
341.   #     x, y  : 描画先 X, Y 座標
     
342.   #     width : 幅
     
343.   #--------------------------------------------------------------------------
     
344.   def draw_actor_exp_gauge(actor, x, y, width = 180)
     
345.     draw_gauge(KMS_GenericGauge::EXP_IMAGE,
     
346.       x, y, width, actor.exp_rate,
     
347.       KMS_GenericGauge::EXP_OFFSET,
     
348.       KMS_GenericGauge::EXP_LENGTH,
     
349.       KMS_GenericGauge::EXP_SLOPE
     
350.     )
     
351.   end
     
352. end
     
353. 
     
354. #==============================================================================
     
355. # ■ Window_Status
     
356. #==============================================================================
     
357. 
     
358. class Window_Status < Window_Selectable
     
359.   #--------------------------------------------------------------------------
     
360.   # ● 経験値情報の描画
     
361.   #--------------------------------------------------------------------------
     
362.   def draw_exp_info(x, y)
     
363.     s_next = sprintf(Vocab::ExpNext, Vocab::level)
     
364.     change_color(system_color)
     
365.     draw_text(x, y + line_height * 0, 180, line_height, Vocab::ExpTotal)
     
366.     draw_text(x, y + line_height * 2, 180, line_height, s_next)
     
367.     change_color(normal_color)
     
368.     draw_actor_exp(     @actor, x, y + line_height * 1)
     
369.     draw_actor_next_exp(@actor, x, y + line_height * 3)
     
370.   end
     
371. end
     

复制代码

System.zip (3.42 KB, 下载次数: 97)

2013-4-22 13:10 上传

点击文件名下载附件

血条文件～放到G啥玩意的S目录下～其实你放了脚本以后没图他自然就提示路径了～还有这种血条你要会PS按道理应该可以画成各种样子～
所以样式是没有限制的～

如果只是加一个框的话应该用不着图片的吧。

1. #==============================================================================
   
2. # F01 - 细节美化 - Ｂｙ芙蕾娅
   
3. #------------------------------------------------------------------------------
   
4. # 　★ - 新增  ☆ - 修改  ■ - 删除　● - 无变更
   
5. #==============================================================================
   
6. module Freya
   
7.   # 值槽的种类
   
8.   # 0 = 默认
   
9.   # 1 = 描绘边框
   
10.   # 2 = 渐变
    
11.   # 3 = 描绘边框 + 渐变
    
12.   Gauge_Type = 3
    
13. end
    
14. #==============================================================================
    
15. # ■ Window_Base
    
16. #------------------------------------------------------------------------------
    
17. # 　游戏中所有窗口的父类
    
18. #==============================================================================
    
19. class Window_Base < Window
    
20.   #--------------------------------------------------------------------------
    
21.   # ☆ 放大字体尺寸
    
22.   #    放大字体尺寸从8更改为4
    
23.   #--------------------------------------------------------------------------
    
24.   def make_font_bigger
    
25.     contents.font.size += 4 if contents.font.size <= 64
    
26.   end
    
27.   #--------------------------------------------------------------------------
    
28.   # ☆ 缩小字体尺寸
    
29.   #    缩小字体尺寸从8更改为4
    
30.   #--------------------------------------------------------------------------
    
31.   def make_font_smaller
    
32.     contents.font.size -= 4 if contents.font.size >= 16
    
33.   end
    
34.   #--------------------------------------------------------------------------
    
35.   # ☆ 绘制值槽
    
36.   #     rate   : 比率（1.0 为满值）
    
37.   #     color1 : 渐变色的左端
    
38.   #     color2 : 渐变色的右端
    
39.   #    增加了绘制种类
    
40.   #--------------------------------------------------------------------------
    
41.   def draw_gauge(x, y, width, rate, color1, color2)
    
42.     if Freya::Gauge_Type == 0
    
43.       fill_w = (width * rate).to_i
    
44.       gauge_y = y + line_height - 8
    
45.       contents.fill_rect(x, gauge_y, width, 6, gauge_back_color)
    
46.       contents.gradient_fill_rect(x, gauge_y, fill_w, 6, color1, color2)
    
47.     elsif Freya::Gauge_Type == 1
    
48.       fill_w = ((width - 2) * rate).to_i
    
49.       gauge_y = y + line_height - 8
    
50.       contents.fill_rect(x, gauge_y, width, 6, gauge_back_color)
    
51.       contents.gradient_fill_rect(x + 1, gauge_y + 1, fill_w, 4, color1, color2)
    
52.     elsif Freya::Gauge_Type == 2
    
53.       fill_w = ((width) * rate).to_i
    
54.       gauge_y = y + line_height - 8
    
55.       contents.fill_rect(x, gauge_y, width, 6, gauge_back_color)
    
56.       contents.gradient_fill_rect(x, gauge_y, fill_w / 2, 6, color1, color2)
    
57.       contents.gradient_fill_rect(x + fill_w / 2, gauge_y, fill_w / 2, 6, color2, color1)
    
58.     elsif Freya::Gauge_Type == 3
    
59.       fill_w = ((width - 2) * rate).to_i
    
60.       gauge_y = y + line_height - 8
    
61.       contents.fill_rect(x, gauge_y, width, 6, gauge_back_color)
    
62.       contents.gradient_fill_rect(x + 1, gauge_y + 1, fill_w / 2, 4, color1, color2)
    
63.       contents.gradient_fill_rect(x + 1 + fill_w / 2, gauge_y + 1, fill_w / 2, 4, color2, color1)
    
64.     end
    
65.   end
    
66.   #--------------------------------------------------------------------------
    
67.   # ☆ 以 当前值／最大值 这样的分数形式绘制当前值和最大值
    
68.   #     current : 当前值
    
69.   #     max     : 最大值
    
70.   #     color1  : 当前值的颜色
    
71.   #     color2  : 最大值的颜色
    
72.   #    稍微缩小字体大小，移动一些坐标
    
73.   #--------------------------------------------------------------------------
    
74.   def draw_current_and_max_values(x, y, width, current, max, color1, color2)
    
75.     change_color(color1)
    
76.     xr = x + width
    
77.     contents.font.size = 15
    
78.     if width < 96
    
79.       draw_text(xr - 40, y, 42, line_height, current, 2)
    
80.     else
    
81.       draw_text(xr - 92, y, 42, line_height, current, 2)
    
82.       change_color(color2)
    
83.       draw_text(xr - 52, y, 12, line_height, "/", 2)
    
84.       draw_text(xr - 42, y, 42, line_height, max, 2)
    
85.     end
    
86.     contents.font.size = Font.default_size
    
87.   end
    
88. end

复制代码

千古一帝 发表于 2013-4-22 09:30
不是这个，我是要个用图片显示槽值的。就是给gauge一个定义，给他添加一张图片。就像网游中的血条一样。有 ...

不好意思，应该是你说的那种。不过不知道怎么改，能发个脚本吗？

不是这个，我是要个用图片显示槽值的。就是给gauge一个定义，给他添加一张图片。就像网游中的血条一样。有个框框。