| 赞 | 72 |
| VIP | |
| 好人卡 | |
| 积分 | 23 |
| 经验 | |
| 最后登录 | 2022-3-9 |
| 在线时间 | 4033 小时 |
…あたしは天
- 梦石
- 0
- 星屑
- 2311
- 在线时间
- 4033 小时
- 注册时间
- 2010-10-4
- 回帖
- 10548
 
|
加入我们,或者,欢迎回来。
您需要 登录 才可以下载或查看,没有账号?注册会员
×
本帖最后由 taroxd 于 2015-2-21 09:26 编辑
- #----------------------------------------------------------------------------
- # ● 事件转译器
- #----------------------------------------------------------------------------
- module Taroxd end
- class Taroxd::Translator
- # 字符串中嵌入脚本的格式:<%= code %>
- EMBED_RE = /<%=(.+?)%>/m
- # 翻译事件指令代码
- def self.translate(*args)
- new(*args).translate
- end
- # list:事件指令列表
- def initialize(list, map_id, event_id)
- @list = list
- @map_id = map_id
- @event_id = event_id
- @index = -1
- end
- # 翻译事件指令代码,并放入 lambda 中,以便于 return 返回。
- # lambda 的参数为当前执行事件指令的 interpreter。
- # 该 lambda 应该由 interpreter.instance_eval 执行。
- def translate
- "lambda do |_|
- #{translate_code}
- end"
- end
- protected
- # 将事件指令翻译成代码
- def translate_code
- ret = ''
- ret << translate_command << "\n" while next_command!
- ret
- end
- private
- def translate_command(command = @command)
- @params = command.parameters
- sym = :"command_#{@command.code}"
- respond_to?(sym, true) && send(sym) || ''
- end
- # 分支。
- # 方法开始时,@index 应位于分支开始之前的位置
- # 方法结束后,@index 将位于分支结束之后的位置
- def translate_branch(indent)
- ret = ''
- until next_command!.indent == indent
- ret << translate_command << "\n"
- end
- ret
- end
- def current_command
- @list[@index]
- end
- def current_params
- current_command.parameters
- end
- def current_indent
- current_command.indent
- end
- def current_code
- current_command.code
- end
- def next_command
- @list[@index + 1]
- end
- def next_command!
- @index += 1
- @command = @list[@index]
- end
- def next_params!
- next_command!.parameters
- end
- def next_code
- next_command.code
- end
- # 返回脚本中的表达形式。obj 可以为字符串或数组。
- def escape(obj)
- obj.kind_of?(String) ? escape_str(obj) : obj.inspect
- end
- # 字符串中的 <%= code %> 会被替换为 #{code}
- # 脚本内容不会被 escape。
- def escape_str(str)
- codes = str.scan(EMBED_RE) # 原来的脚本
- index = -1
- str.inspect.gsub(EMBED_RE) { "\#{#{codes[index += 1][0]}}" }
- end
- # helper
- # 在战斗中不执行
- def only_map(code)
- "unless $game_party.in_battle
- #{code}
- end\n"
- end
- def same_map?
- "$game_map.map_id == #{@map_id}"
- end
- def setup_choices(params)
- ret = ''
- params[0].each do |s|
- ret << "$game_message.choices.push(#{escape s})\n"
- end
- ret << "$game_message.choice_cancel_type = #{params[1]}
- $game_message.choice_proc = Proc.new { |n| @params = n }
- Fiber.yield while $game_message.choice?
- case @params
- "
- next_command!
- until current_code == 404 # 选项结束
- # 取消的场合为 4,否则为对应选项
- n = current_code == 403 ? 4 : current_params[0]
- ret << "when #{n}\n" <<
- translate_branch(current_indent) << "\n"
- end
- ret << "end" # end case
- end
- def setup_num_input(params)
- "$game_message.num_input_variable_id = #{params[0]}
- $game_message.num_input_digits_max = #{params[1]}"
- end
- def setup_item_choice(params)
- "$game_message.item_choice_variable_id = #{params[0]}"
- end
- def wait(duration)
- "#{duration}.times { Fiber.yield }"
- end
- def wait_for_message
- 'Fiber.yield while $game_message.busy?'
- end
- def operate_value(operation, operand_type, operand)
- value = operand_type == 0 ? operand : "$game_variables[#{operand}]"
- "#{'-' if operation == 1}#{value}"
- end
- def iter_actor_id(param)
- if param.equal?(0)
- "$game_party.members.each do |actor|
- #{yield 'actor'}
- end"
- else
- "$game_actors[#{param}].tap do |actor|
- if actor
- #{yield 'actor'}
- end
- end"
- end
- end
- def iter_actor_var(param1, param2, &block)
- if param1 == 0
- iter_actor_id(param2, &block)
- else
- iter_actor_id("$game_variables[#{param2}]", &block)
- end
- end
- def iter_enemy_index(param)
- if param < 0
- "$game_troop.members.each do |enemy|
- #{yield 'enemy'}
- end"
- else
- "$game_troop.members[#{param}].tap do |enemy|
- if enemy
- #{yield 'enemy'}
- end
- end"
- end
- end
- def iter_battler(param1, param2, &block)
- "if $game_party.in_battle
- #{
- if param1 == 0
- iter_enemy_index(param2, &block)
- else
- iter_actor_id(param2, &block)
- end
- }
- end"
- end
- # 指令
- # 请对照 Game_Interpreter 的定义阅读。
- # 空指令
- def command_0
- 'nil'
- end
- # 显示文字
- def command_101
- ret = "
- #{wait_for_message}
- $game_message.face_name = #{escape @params[0]}
- $game_message.face_index = #{@params[1]}
- $game_message.background = #{@params[2]}
- $game_message.position = #{@params[3]}
- "
- while next_code == 401 # 文字数据
- ret << "$game_message.add(#{escape next_params![0]})\n"
- end
- ret << case next_code
- when 102 # 显示选项
- setup_choices(next_params!)
- when 103 # 数值输入的处理
- "#{setup_num_input(next_params!)}
- Fiber.yield while $game_message.num_input?"
- when 104 # 物品选择的处理
- "#{setup_item_choice(next_params!)}
- Fiber.yield while $game_message.item_choice?"
- else
- wait_for_message
- end
- end
- # 显示选项
- def command_102
- "#{wait_for_message}
- #{setup_choices(@params)}"
- end
- # 数值输入的处理
- def command_103
- "#{wait_for_message}
- #{setup_num_input(@params)}
- Fiber.yield while $game_message.num_input?"
- end
- # 物品选择的处理
- def command_104
- "#{wait_for_message}
- #{setup_item_choice(@params)}
- Fiber.yield while $game_message.item_choice?"
- end
- # 显示滚动文字
- def command_105
- ret = "
- Fiber.yield while $game_message.visible
- $game_message.scroll_mode = true
- $game_message.scroll_speed = #{@params[0]}
- $game_message.scroll_no_fast = #{@params[1]}
- "
- while next_code == 405
- ret << "$game_message.add(#{escape next_params![0]})\n"
- end
- ret << wait_for_message
- end
- # 分支条件
- def command_111
- result = case @params[0]
- when 0 # 开关
- "#{'!' if @params[2] == 1}$game_switches[#{@params[1]}]"
- when 1 # 变量
- value1 = "$game_variables[#{@params[1]}]"
- value2 = if @params[2] == 0
- @params[3]
- else
- "$game_variables[#{@params[3]}]"
- end
- op = case @params[4]
- when 0 then '==' # 等于
- when 1 then '>=' # 以上
- when 2 then '<=' # 以下
- when 3 then '>' # 大于
- when 4 then '<' # 小于
- when 5 then '!=' # 不等于
- end
- "#{value1} #{op} #{value2}"
- when 2 # 独立开关
- if @event_id > 0
- "#{'!' if @params[2] != 0}"\
- "$game_self_switches[[#{@map_id}, #{@event_id}, "\
- "#{escape @params[1]}]]"
- else
- 'false'
- end
- when 3 # 计时器
- op = @params[2] == 0 ? '>=' : '<='
- "$game_timer.working? && $game_timer.sec #{op} #{@params[1]}"
- when 4 # 角色
- "begin
- @params = $game_actors[#{@params[1]}]
- if @params
- " << case @params[2]
- when 0 # 在队伍时
- '$game_party.members.include?(@params)'
- when 1 # 名字
- "@params.name == #{escape @params[3]}"
- when 2 # 职业
- "@params.class_id == #{@params[3]}"
- when 3 # 技能
- "@params.skill_learn?($data_skills[#{@params[3]}])"
- when 4 # 武器
- "@params.weapons.include?($data_weapons[#{@params[3]}])"
- when 5 # 护甲
- "@params.armors.include?($data_armors[#{@params[3]}])"
- when 6 # 状态
- "@params.state?(#{@params[3]})"
- end << "\nend\nend" # if @params; begin
- when 5 # 敌人
- "begin
- @params = $game_troop.members[#{@params[1]}]
- if @params
- " << case @params[2]
- when 0 # 出现
- '@params.alive?'
- when 1 # 状态
- "@params.state?(#{@params[3]})"
- end << "\nend\nend" # if @params; begin
- when 6 # 事件
- "begin
- @params = get_character(#{@params[1]})
- if @params
- @params.direction == #{@params[2]}
- end
- end"
- when 7 # 金钱
- op = case @params[2]
- when 0 then '>=' # 以上
- when 1 then '<=' # 以下
- when 2 then '<' # 低于
- end
- "$game_party.gold #{op} #{@params[1]}"
- when 8 # 物品
- "$game_party.has_item?($data_items[#{@params[1]}])"
- when 9 # 武器
- "$game_party.has_item?($data_weapons[#{@params[1]}], #{@params[2]})"
- when 10 # 护甲
- "$game_party.has_item?($data_armors[#{@params[1]}], #{@params[2]})"
- when 11 # 按下按钮
- "Input.press?(#{@params[1]})"
- when 12 # 脚本
- "begin
- #{@params[1]}
- end"
- when 13 # 载具
- "$game_player.vehicle == $game_map.vehicles[#{@params[1]}]"
- end
- "if #{result}\n"
- end
- # 否则
- def command_411
- 'else'
- end
- # 分支结束
- def command_412
- 'end'
- end
- # 循环
- def command_112
- 'while true'
- end
- # 重复
- def command_413
- 'end'
- end
- # 跳出循环
- def command_113
- 'break'
- end
- # 中止事件处理
- def command_115
- 'return'
- end
- # 公共事件
- def command_117
- event = $data_common_events[@params[0]]
- self.class.new(event.list, @map_id, @event_id).translate_code if event
- end
- # 转至标签
- def command_119
- raise NotImplementedError
- end
- # 开关操作
- def command_121
- "#{@params[0]}.upto(#{@params[1]}) do |i|
- $game_switches[i] = #{@params[2] == 0}
- end"
- end
- # 变量操作
- def command_122
- value = case @params[3] # 操作方式
- when 0 # 常量
- @params[4]
- when 1 # 变量
- "$game_variables[#{@params[4]}]"
- when 2 # 随机数
- "#{@params[4]} + rand(#{@params[5] - @params[4] + 1})"
- when 3 # 游戏数据
- "game_data_operand(#{@params[4]}, #{@params[5]}, #{@params[6]})"
- when 4 # 脚本
- "begin
- #{@params[4]}
- end"
- end
- "#{@params[0]}.upto(#{@params[1]}) do |i|
- operate_variable(i, #{@params[2]}, #{value})
- end"
- end
- # 独立开关操作
- def command_123
- return if @event_id <= 0
- "$game_self_switches[[#{@map_id}, #{@event_id}, "\
- "#{escape @params[0]}]] = #{@params[1] == 0}"
- end
- # 计时器操作
- def command_124
- if @params[0] == 0 # 开始
- "$game_timer.start(#{@params[1] * Graphics.frame_rate})"
- else # 停止
- '$game_timer.stop'
- end
- end
- # 增减金钱
- def command_125
- value = operate_value(@params[0], @params[1], @params[2])
- "$game_party.gain_gold(#{value})"
- end
- # 增减物品
- def command_126
- value = operate_value(@params[1], @params[2], @params[3])
- "$game_party.gain_item($data_items[#{@params[0]}], #{value})"
- end
- # 增减武器
- def command_127
- value = operate_value(@params[1], @params[2], @params[3])
- "$game_party.gain_item($data_weapons[#{@params[0]}], "\
- "#{value}, #{@params[4]})"
- end
- # 增减护甲
- def command_128
- value = operate_value(@params[1], @params[2], @params[3])
- "$game_party.gain_item($data_armors[#{@params[0]}], "\
- "#{value}, #{@params[4]})"
- end
- # 队伍管理
- def command_129
- return unless $game_actors[@params[0]]
- ret = ''
- if @params[1] == 0 # 入队
- if @params[2] == 1 # 初始化
- ret << "$game_actors[#{@params[0]}].setup(#{@params[0]})\n"
- end
- ret << "$game_party.add_actor(#{@params[0]})"
- else # 离队
- ret << "$game_party.remove_actor(#{@params[0]})"
- end
- end
- # 设置禁用存档
- def command_134
- "$game_system.menu_disabled = #{@params[0] == 0}"
- end
- # 设置禁用菜单
- def command_135
- "$game_system.menu_disabled = #{@params[0] == 0}"
- end
- # 设置禁用遇敌
- def command_136
- "$game_system.encounter_disabled = #{@params[0] == 0}
- $game_player.make_encounter_count"
- end
- # 设置禁用整队
- def command_137
- "$game_system.formation_disabled = #{@params[0] == 0}"
- end
- # 场所移动
- def command_201
- if @params[0] == 0 # 直接指定
- map_id = @params[1]
- x = @params[2]
- y = @params[3]
- else # 变量指定
- map_id = "$game_variables[#{@params[1]}]"
- x = "$game_variables[#{@params[2]}]"
- y = "$game_variables[#{@params[3]}]"
- end
- only_map "
- Fiber.yield while $game_player.transfer? || $game_message.visible
- $game_player.reserve_transfer(#{map_id}, #{x}, #{y}, #{@params[4]})
- $game_temp.fade_type = #{@params[5]}
- Fiber.yield while $game_player.transfer?"
- end
- # 设置载具位置
- def command_202
- if @params[1] == 0 # 直接指定
- map_id = @params[2]
- x = @params[3]
- y = @params[4]
- else # 变量指定
- map_id = "$game_variables[#{@params[2]}]"
- x = "$game_variables[#{@params[3]}]"
- y = "$game_variables[#{@params[4]}]"
- end
- "@params = $game_map.vehicles[#{@params[0]}]
- @params.set_location(#{map_id}, #{x}, #{y}) if @params"
- end
- # 设置事件位置
- def command_203
- case @params[1]
- when 0
- "@params = get_character(#{@params[0]})
- @params.moveto(#{@params[2]}, #{@params[3]}) if @params
- #{"@params.set_direction(#{@params[4]})" if @params[4] > 0}"
- when 1
- "@params = get_character(#{@params[0]})
- @params.move_to("\
- "$game_variables[#{@params[2]}], "\
- "$game_variables[#{@params[3]}])
- #{"@params.set_direction(#{@params[4]})" if @params[4] > 0}"
- when 2
- "@params = [get_character(#{@params[0]}), "\
- "get_character(#{@params[2]})]
- @params.first.swap(@params.last) if @params.all?
- #{"@params.first.set_direction(#{@params[4]})" if @params[4] > 0}"
- end
- end
- # 地图卷动
- def command_204
- only_map "
- Fiber.yield while $game_map.scrolling?
- $game_map.start_scroll(#{@params[0]}, #{@params[1]}, #{@params[2]})
- "
- end
- # 载具乘降
- def command_206
- '$game_player.get_on_off_vehicle'
- end
- # 更改透明状态
- def command_211
- "$game_player.transparent = #{@params[0] == 0}"
- end
- # 显示动画
- def command_212
- "@params = get_character(#{@params[0]})
- if @params
- @params.animation_id = #{@params[1]}
- #{'Fiber.yield while @params.animation_id > 0' if @params[2]}
- end"
- end
- # 显示心情图标
- def command_213
- "@params = get_character(#{@params[0]})
- if @params
- @params.balloon_id = #{@params[1]}
- #{'Fiber.yield while @params.balloon_id > 0' if @params[2]}
- end"
- end
- # 暂时消除事件
- def command_214
- return if @event_id <= 0
- "$game_map.events[#{@event_id}].erase if #{same_map?}"
- end
- # 更改队列前进
- def command_216
- "$game_player.followers.visible = #{@params[0] == 0}
- $game_player.refresh"
- end
- # 集合队伍成员
- def command_217
- only_map '$game_player.followers.gather
- Fiber.yield until $game_player.followers.gather?'
- end
- # 淡出画面
- def command_221
- "Fiber.yield while $game_message.visible
- screen.start_fadeout(30)
- #{wait(30)}"
- end
- # 淡入画面
- def command_222
- "Fiber.yield while $game_message.visible
- screen.start_fadein(30)
- #{wait(30)}"
- end
- # 画面震动
- def command_225
- "screen.start_shake(#{@params[0]}, #{@params[1]}, #{@params[2]})
- #{wait(@params[2]) if @params[3]}"
- end
- # 等待
- def command_230
- wait(@params[0])
- end
- # 显示图片
- def command_231
- if @params[3] == 0 # 直接指定
- x = @params[4]
- y = @params[5]
- else # 变量指定
- x = "$game_variables[#{@params[4]}]"
- y = "$game_variables[#{@params[5]}]"
- end
- "screen.pictures[#{@params[0]}].show(#{escape @params[1]}, "\
- "#{@params[2]}, #{x}, #{y}, #{@params[6]}, #{@params[7]}, "\
- "#{@params[8]}, #{@params[9]})"
- end
- # 移动图片
- def command_232
- if @params[3] == 0 # 直接指定
- x = @params[4]
- y = @params[5]
- else # 变量指定
- x = "$game_variables[#{@params[4]}]"
- y = "$game_variables[#{@params[5]}]"
- end
- "screen.pictures[#{@params[0]}].move(#{@params[2]}, #{x}, #{y}, "\
- "#{@params[6]}, #{@params[7]}, #{@params[8]}, "\
- "#{@params[9]}, #{@params[10]})
- #{wait(@params[10]) if @params[11]}"
- end
- # 旋转图片
- def command_233
- "screen.pictures[#{@params[0]}].rotate(#{@params[1]})"
- end
- # 消除图片
- def command_235
- "screen.pictures[#{@params[0]}].erase"
- end
- # 设置天气
- def command_236
- only_map "
- screen.change_weather(#{@params[0]}, #{@params[1]}, #{@params[2]})
- #{wait(@params[2]) if @params[3]}"
- end
- # 淡出 BGM
- def command_242
- "RPG::BGM.fade(#{@params[0] * 1000})"
- end
- # 记忆 BGM
- def command_243
- '$game_system.save_bgm'
- end
- # 恢复 BGM
- def command_244
- '$game_system.replay_bgm'
- end
- # 淡出 BGS
- def command_246
- "RPG::BGS.fade(#{@params[0] * 1000})"
- end
- # 停止 SE
- def command_251
- RPG::SE.stop
- end
- # 播放影像
- def command_261
- name = @params[0]
- return if name.empty?
- name = escape('Movies/' + name)
- "Fiber.yield while $game_message.visible
- Fiber.yield
- Graphics.play_movie(#{name})"
- end
- # 更改地图名称显示
- def command_281
- "$game_map.name_display = #{@params[0] == 0}"
- end
- # 更改图块组
- def command_282
- "$game_map.change_tileset(#{@params[0]})"
- end
- # 更改战场背景
- def command_283
- name = "#{escape(@params[0])}, #{escape(@params[1])}"
- "$game_map.change_battleback(#{name})"
- end
- # 更改远景
- def command_284
- "$game_map.change_parallax(#{escape @params[0]}, "\
- "#{@params[1]}, #{@params[2]}, #{@params[3]}, #{@params[4]})"
- end
- # 获取指定位置的信息
- def command_285
- if @params[2] == 0 # 直接指定
- x = @params[3]
- y = @params[4]
- else # 变量指定
- x = "$game_variables[#{@params[3]}]"
- y = "$game_variables[#{@params[4]}]"
- end
- value =
- case @params[1]
- when 0 # 地形标志
- "$game_map.terrain_tag(#{x}, #{y})"
- when 1 # 事件 ID
- "$game_map.event_id_xy(#{x}, #{y})"
- when 2..4 # 图块 ID
- "$game_map.tile_id(#{x}, #{y}, #{@params[1] - 2})"
- else # 区域 ID
- "$game_map.region_id(#{x}, #{y})"
- end
- "$game_variables[#{@params[0]}] = #{value}"
- end
- # 战斗的处理
- def command_301
- troop_id = if @params[0] == 0 # 直接指定
- @params[1]
- elsif @params[0] == 1 # 变量指定
- "$game_variables[#{@params[1]}]"
- else # 地图指定的敌群
- '$game_player.make_encounter_troop_id'
- end
- ret = "
- if $data_troops[#{troop_id}]
- BattleManager.setup(#{troop_id}, #{@params[2]}, #{@params[3]})
- BattleManager.event_proc = Proc.new { |n| @params = n }
- $game_player.make_encounter_count
- SceneManager.call(Scene_Battle)
- end
- Fiber.yield
- "
- if next_code == 601 # 存在分支
- next_command!
- ret << "case @params\n"
- until current_code == 604 # 分支结束
- ret << "when #{current_code - 601}\n" <<
- translate_branch(current_indent) << "\n"
- end
- ret << "end"
- end
- only_map ret
- end
- # 商店的处理
- def command_302
- goods = [@params]
- while next_code == 605
- goods.push(next_params!)
- end
- only_map "
- SceneManager.call(Scene_Shop)
- SceneManager.scene.prepare(#{escape goods}, #{@params[4]})
- Fiber.yield"
- end
- # 名字输入的处理
- def command_303
- return '' unless $data_actors[@params[0]]
- only_map "
- SceneManager.call(Scene_Name)
- SceneManager.scene.prepare(#{@params[0]}, #{@params[1]})
- Fiber.yield"
- end
- # 增减 HP
- def command_311
- value = operate_value(@params[2], @params[3], @params[4])
- iter_actor_var(@params[0], @params[1]) do |actor|
- "next if #{actor}.dead?
- #{actor}.change_hp(#{value}, #{@params[5]})
- #{actor}.perform_collapse_effect if #{actor}.dead?"
- end << '
- SceneManager.goto(Scene_Gameover) if $game_party.all_dead?'
- end
- # 增减 MP
- def command_312
- value = operate_value(@params[2], @params[3], @params[4])
- iter_actor_var(@params[0], @params[1]) do |actor|
- "#{actor}.mp += #{value}"
- end
- end
- # 更改状态
- def command_313
- action = @params[2] == 0 ? 'add_state' : 'remove_state'
- iter_actor_var(@params[0], @params[1]) do |actor|
- "@params = actor.dead?
- #{actor}.#{action}(#{params[3]})
- #{actor}.perform_collapse_effect if #{actor}.dead? && !@params"
- end
- end
- # 完全恢复
- def command_314
- iter_actor_var(@params[0], @params[1]) do |actor|
- "#{actor}.recover_all"
- end
- end
- # 增减经验值
- def command_315
- value = operate_value(@params[2], @params[3], @params[4])
- iter_actor_var(@params[0], @params[1]) do |actor|
- "#{actor}.change_exp(#{actor}.exp + #{value}, #{@params[5]})"
- end
- end
- # 增减等级
- def command_316
- value = operate_value(@params[2], @params[3], @params[4])
- iter_actor_var(@params[0], @params[1]) do |actor|
- "#{actor}.change_level(#{actor}.level + #{value}, #{@params[5]})"
- end
- end
- # 增减能力值
- def command_317
- value = operate_value(@params[3], @params[4], @params[5])
- iter_actor_var(@params[0], @params[1]) do |actor|
- "#{actor}.add_param(#{@params[2]}, #{value})"
- end
- end
- # 增减技能
- def command_318
- action = @params[2] == 0 ? 'learn_skill' : 'forget_skill'
- iter_actor_var(@params[0], @params[1]) do |actor|
- "#{actor}.#{action}(#{@params[3]})"
- end
- end
- # 更换装备
- def command_319
- "@params = $game_actors[#{@params[0]}]
- @params.change_equip_by_id(#{@params[1]}, #{@params[2]}) if @params"
- end
- # 更改名字
- def command_320
- "@params = $game_actors[#{@params[0]}]
- @params.name = #{escape @params[1]} if @params"
- end
- # 更改职业
- def command_321
- return '' unless $data_classes[@params[1]]
- "@params = $game_actors[#{@params[0]}]
- @params.change_class(#{@params[1]}) if @params"
- end
- # 更改角色图像
- def command_322
- return unless $game_actors[@params[0]]
- "$game_actors[#{@params[0]}].set_graphic("\
- "#{escape @params[1]}, #{@params[2]}, "\
- "#{escape @params[3]}, #{@params[4]})
- $game_player.refresh"
- end
- # 更改载具的图像
- def command_323
- "@params = $game_map.vehicles[#{@params[0]}]
- @params.set_graphic(#{escape @params[1]}, #{@params[2]}) if @params"
- end
- # 更改称号
- def command_324
- "@params = $game_actors[#{@params[0]}]
- @params.nickname = #{escape @params[1]} if @params"
- end
- # 增减敌人 HP
- def command_331
- value = operate_value(@params[1], @params[2], @params[3])
- iter_enemy_index(@params[0]) do |enemy|
- "unless #{enemy}.dead?
- #{enemy}.change_hp(#{value}, #{@params[4]})
- #{enemy}.perform_collapse_effect if #{enemy}.dead?
- end"
- end
- end
- # 增减敌人的 MP
- def command_332
- value = operate_value(@params[1], @params[2], @params[3])
- iter_enemy_index(@params[0]) do |enemy|
- "#{enemy}.mp += #{value}"
- end
- end
- # 更改敌人的状态
- def command_333
- action = @params[1] == 0 ? 'add_state' : 'remove_state'
- iter_enemy_index(@params[0]) do |enemy|
- "@params = #{enemy}.dead?
- #{enemy}.#{action}(#{@params[2]})
- #{enemy}.perform_collapse_effect if #{enemy}.dead? && !@params"
- end
- end
- # 敌人完全恢复
- def command_334
- iter_enemy_index(@params[0]) do |enemy|
- "#{enemy}.recover_all"
- end
- end
- # 敌人出现
- def command_335
- iter_enemy_index(@params[0]) do |enemy|
- "#{enemy}.appear
- $game_troop.make_unique_names"
- end
- end
- # 敌人变身
- def command_336
- iter_enemy_index(@params[0]) do |enemy|
- "#{enemy}.transform(#{@params[1]})
- $game_troop.make_unique_names"
- end
- end
- # 显示战斗动画
- def command_337
- iter_enemy_index(@params[0]) do |enemy|
- "#{enemy}.animation_id = #{@params[1]} if #{enemy}.alive?"
- end
- end
- # 强制战斗行动
- def command_339
- iter_battler(@params[0], @params[1]) do |battler|
- "next if #{battler}.death_state?
- #{battler}.force_action(#{@params[2]}, #{@params[3]})
- BattleManager.force_action(#{battler})
- Fiber.yield while BattleManager.action_forced?"
- end
- end
- # 中止战斗
- def command_340
- 'BattleManager.abort
- Fiber.yield'
- end
- # 打开菜单画面
- def command_351
- only_map 'SceneManager.call(Scene_Menu)
- Window_MenuCommand.init_command_position
- Fiber.yield'
- end
- # 打开存档画面
- def command_352
- only_map 'SceneManager.call(Scene_Save)
- Fiber.yield'
- end
- # 游戏结束
- def command_353
- 'SceneManager.goto(Scene_Gameover)
- Fiber.yield'
- end
- # 返回标题画面
- def command_354
- 'SceneManager.goto(Scene_Title)
- Fiber.yield'
- end
- # 脚本
- def command_355
- @params[0]
- end
- # 脚本数据
- alias_method :command_655, :command_355
- # 将 command 直接代理给 Game_Interpreter#command_xxx
- def self.delegate_command(code)
- # def command_233
- # "@params = ObjectSpace._id2ref(#{@params.__id__})
- # command_233"
- # end
- set_params = '@params = ObjectSpace._id2ref(#{@params.__id__})'
- class_eval %{
- def command_#{code}
- "#{set_params}
- command_#{code}"
- end
- }
- end
- delegate_command 132 # 更改战斗 BGM
- delegate_command 133 # 更改战斗结束 ME
- delegate_command 138 # 更改窗口色调
- delegate_command 205 # 设置移动路径
- delegate_command 223 # 更改画面色调
- delegate_command 224 # 画面闪烁
- delegate_command 234 # 更改图片的色调
- delegate_command 241 # 播放 BGM
- delegate_command 245 # 播放 BGS
- delegate_command 249 # 播放 ME
- delegate_command 250 # 播放 SE
- end
复制代码 |
|