关于隐藏单一角色数值

t0004980 · 发表于 2021-8-12 20:17:58

我想把某一位角色的等级跟HPMP隐藏起来，
但同时其他角色还是有显示的。
请问这要怎么做呢？

yaminolancelot · 发表于 2021-8-12 20:17:59

t0004980 发表于 2021-8-13 02:00
我有放在下面了，不然我直接工程给你看？
谢谢，不好意思麻烦了。
链接: https://pan.baidu.com/s/1ID09Z ...

YAMI_NEED2HIDE = [1,2] #角色id
YAMI_REPLACE_TEXT = "未知"
class CAO::CM::Canvas
alias yami_draw_actor_level draw_actor_level
alias yami_draw_actor_level_g draw_actor_level_g
alias yami_draw_actor_hp draw_actor_hp
alias yami_draw_actor_mp draw_actor_mp
def draw_actor_level(actor, x, y, width = 64)
if YAMI_NEED2HIDE.include?(actor.actor.id)
draw_text(x, y, text_size(YAMI_REPLACE_TEXT).width * 2, line_height, YAMI_REPLACE_TEXT)
return
end
yami_draw_actor_level(actor, x, y,width)
end
def draw_actor_level_g(actor, x, y, width = 64)
if YAMI_NEED2HIDE.include?(actor.actor.id)
draw_text(x, y, text_size(YAMI_REPLACE_TEXT).width * 2, line_height, YAMI_REPLACE_TEXT)
return
end
yami_draw_actor_level_g(actor, x, y,width)
end
def draw_actor_hp(actor, x, y, width = 124)
if YAMI_NEED2HIDE.include?(actor.actor.id)
draw_text(x, y, text_size(YAMI_REPLACE_TEXT).width * 2, line_height, YAMI_REPLACE_TEXT)
return
end
yami_draw_actor_hp(actor, x, y, width)
end
def draw_actor_mp(actor, x, y, width = 124)
if YAMI_NEED2HIDE.include?(actor.actor.id)
draw_text(x, y, text_size(YAMI_REPLACE_TEXT).width * 2, line_height, YAMI_REPLACE_TEXT)
return
end
yami_draw_actor_mp(actor, x, y, width)
end
end

复制代码

yaminolancelot · 发表于 2021-8-12 21:15:42

YAMI_NEED2HIDE = [1,2] #角色id
YAMI_REPLACE_TEXT = "未知"
class Window_Base
alias yami_draw_actor_level draw_actor_level
alias yami_draw_actor_hp draw_actor_hp
alias yami_draw_actor_mp draw_actor_mp
def draw_actor_level(actor, x, y)
if YAMI_NEED2HIDE.include?(actor.actor.id)
draw_text(x, y, text_size(YAMI_REPLACE_TEXT).width * 2, line_height, YAMI_REPLACE_TEXT)
return
end
yami_draw_actor_level(actor, x, y)
end
def draw_actor_hp(actor, x, y, width = 124)
if YAMI_NEED2HIDE.include?(actor.actor.id)
draw_text(x, y, text_size(YAMI_REPLACE_TEXT).width * 2, line_height, YAMI_REPLACE_TEXT)
return
end
yami_draw_actor_hp(actor, x, y, width)
end
def draw_actor_mp(actor, x, y, width = 124)
if YAMI_NEED2HIDE.include?(actor.actor.id)
draw_text(x, y, text_size(YAMI_REPLACE_TEXT).width * 2, line_height, YAMI_REPLACE_TEXT)
return
end
yami_draw_actor_mp(actor, x, y, width)
end
end

复制代码

t0004980 · 发表于 2021-8-12 22:32:20

本帖最后由 t0004980 于 2021-8-12 22:34 编辑

yaminolancelot 发表于 2021-8-12 21:15

我还想请问一下，因为我有使用别的菜单脚本
所以会出现菜单主画面没变，但是状态却显示改变了。

#******************************************************************************
#
# ＊ステータスウィンドウ
#
# --------------------------------------------------------------------------
# バージョン： 1.1.0
# 対応： RPGツクールVX Ace : RGSS3
# 制作者：ＣＡＣＡＯ
# 配布元： http://cacaosoft.web.fc2.com/
# --------------------------------------------------------------------------
# == 概要 ==
#
# ：デフォルトっぽいステータスです。
#
# --------------------------------------------------------------------------
# == 注意事項 ==
#
# ※ このスクリプトの動作には、Custom Menu Base が必要です。
# ※ 横１列のみの場合は左右に、それ以外は上下のみスクロールします。
#
#
#******************************************************************************
#==============================================================================
# ◆ 設定項目
#==============================================================================
module CAO::CM::Status
#--------------------------------------------------------------------------
# ◇ ウィンドウの位置・サイズ
#--------------------------------------------------------------------------
WINDOW_X = 0 # ｘ座標
WINDOW_Y = 108 # ｙ座標
WINDOW_W = 544 # 横幅
WINDOW_H = 236 # 縦幅
#--------------------------------------------------------------------------
# ◇ １アクターのサイズ
#--------------------------------------------------------------------------
ITEM_W = 130
ITEM_H = 212
#--------------------------------------------------------------------------
# ◇ 項目を横に並べる数
#--------------------------------------------------------------------------
COLUMN_MAX = 4
#--------------------------------------------------------------------------
# ◇ 表示項目の設定
#--------------------------------------------------------------------------
ITEM_PARAMS = []
ITEM_PARAMS << [:face, 15, 28]
ITEM_PARAMS << [:fill, 15, 28, 96, 96, 128, '!actor.battle_member?']
ITEM_PARAMS << [:name, 3, 0]
ITEM_PARAMS << [:state, 3, 0, 160, 1]
ITEM_PARAMS << [:lv_g, 3, 128, 124]
ITEM_PARAMS << [:hp, 3, 148]
ITEM_PARAMS << [:mp, 3, 170]
ITEM_PARAMS << [:tp, 3, 190]
#--------------------------------------------------------------------------
# ◇ 戦闘メンバーのみ表示
#--------------------------------------------------------------------------
::CAO::CM::BATTLER_ONLY = false
#--------------------------------------------------------------------------
# ◇ ウィンドウの可視状態
#--------------------------------------------------------------------------
VISIBLE_BACKWINDOW = true
end
#/////////////////////////////////////////////////////////////////////////////#
# #
# 下記のスクリプトを変更する必要はありません。 #
# #
#/////////////////////////////////////////////////////////////////////////////#
class Window_MenuStatus
include CAO::CM::Status
#--------------------------------------------------------------------------
# ○ オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(x, y)
super(WINDOW_X, WINDOW_Y, window_width, window_height)
self.opacity = VISIBLE_BACKWINDOW ? 255 : 0
@canvas = CAO::CM::Canvas.new(self)
@pending_index = -1
refresh
end
#--------------------------------------------------------------------------
# ○ 横に項目が並ぶときの空白の幅を取得
#--------------------------------------------------------------------------
def spacing
return 0
end
#--------------------------------------------------------------------------
# ○ ウィンドウ幅の取得
#--------------------------------------------------------------------------
def window_width
WINDOW_W
end
#--------------------------------------------------------------------------
# ○ ウィンドウ高さの取得
#--------------------------------------------------------------------------
def window_height
WINDOW_H
end
#--------------------------------------------------------------------------
# ○ ウィンドウ内容の幅を計算
#--------------------------------------------------------------------------
def contents_width
(item_width + spacing) * col_max - spacing
end
#--------------------------------------------------------------------------
# ● 項目数の取得
#--------------------------------------------------------------------------
def item_max
$game_party.members.size
end
#--------------------------------------------------------------------------
# ● 桁数の取得
#--------------------------------------------------------------------------
def col_max
return COLUMN_MAX
end
#--------------------------------------------------------------------------
# ○ 項目の幅を取得
#--------------------------------------------------------------------------
def item_width
ITEM_W
end
#--------------------------------------------------------------------------
# ○ 項目の高さを取得
#--------------------------------------------------------------------------
def item_height
ITEM_H
end
#--------------------------------------------------------------------------
# ● 項目の描画
#--------------------------------------------------------------------------
def draw_item(index)
draw_item_background(index)
actor = $game_party.members[index]
rect = item_rect(index)
@canvas.draw_actor_items(actor, rect.x, rect.y, ITEM_PARAMS)
end
#--------------------------------------------------------------------------
# ● カーソルを下に移動
#--------------------------------------------------------------------------
def cursor_down(wrap = false)
if index < item_max - col_max || (wrap && col_max == 1)
select((index + col_max) % item_max)
elsif col_max != 1 && index < (item_max.to_f/col_max).ceil*col_max-col_max
select(item_max - 1)
end
end
end
class Scene_Menu
#--------------------------------------------------------------------------
# ● ステータスウィンドウの作成
#--------------------------------------------------------------------------
def create_status_window
@status_window = Window_MenuStatus.new(0, 0)
end
#--------------------------------------------------------------------------
# ● ステータスウィンドウの更新
#--------------------------------------------------------------------------
def update_status_window
@status_window.unselect unless @status_window.active
end
#--------------------------------------------------------------------------
# ○ コマンド実行後の処理
#--------------------------------------------------------------------------
alias _cao_cm_status_post_terminate post_terminate
def post_terminate
_cao_cm_status_post_terminate
if current_console.current_data.refresh_items.include?(:status)
@status_window.refresh
end
end
end
class Game_Party < Game_Unit
#--------------------------------------------------------------------------
# ● 公開インスタンス変数
#--------------------------------------------------------------------------
attr_accessor :in_menu # メニュー中フラグ
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def in_menu
return true if SceneManager.scene_is?(Scene_Menu)
return SceneManager.instance_variable_get(:@stack).any? do |obj|
obj.is_a?(Scene_Menu)
end
end
#--------------------------------------------------------------------------
# ○ メンバーの取得
#--------------------------------------------------------------------------
def members
return battle_members if in_battle
return battle_members if CAO::CM::BATTLER_ONLY && in_menu
return all_members
end
end
class Scene_ItemBase < Scene_MenuBase
#--------------------------------------------------------------------------
# ○ サブウィンドウの表示
#--------------------------------------------------------------------------
def show_sub_window(window)
window.x = (Graphics.width - window.width) / 2
window.y = (Graphics.height - window.height) / 2
window.z = @viewport.z# + 1
@last_viewport_color = @viewport.color.dup
@viewport.color.set(16, 16, 16, 128)
window.show.activate
end
#--------------------------------------------------------------------------
# ○ サブウィンドウの非表示
#--------------------------------------------------------------------------
def hide_sub_window(window)
@viewport.color.set(@last_viewport_color) if @last_viewport_color
window.hide.deactivate
activate_item_window
end
end

复制代码

#******************************************************************************
#
# ＊ Custom Menu Base
#
# --------------------------------------------------------------------------
# バージョン： 1.1.0
# 対応： RPGツクールVX Ace : RGSS3
# 制作者：ＣＡＣＡＯ
# 配布元： [url=http://cacaosoft.web.fc2.com/]http://cacaosoft.web.fc2.com/[/url]
# --------------------------------------------------------------------------
# == 概要 ==
#
# ：カスタムメニューのベーススクリプトです。
#
# --------------------------------------------------------------------------
# == 注意事項 ==
#
# ※ このスクリプトは、なるべく下のほうのに導入してください。
# ※ カスタムメニュー関連のスクリプトより上に導入してください。
#
#
#******************************************************************************
#==============================================================================
# ◆ ユーザー設定
#==============================================================================
module CAO
module CM
#--------------------------------------------------------------------------
# ◇ メニュー項目の設定
#--------------------------------------------------------------------------
COMMAND_ITEMS = {}
COMMAND_ITEMS[:item] = {
:name => "物品",
:command => Scene_Item,
:help => '使用物品。'
}
COMMAND_ITEMS[:skill] = {
:name => "技能",
:personal => Scene_Skill,
:help => '使用技能。'
}
COMMAND_ITEMS[:equip] = {
:name => "装备",
:personal => Scene_Equip,
:help => '变更装备。'
}
COMMAND_ITEMS[:status] = {
:name => "状态",
:personal => Scene_Status,
:help => '确认人物状态。'
}
COMMAND_ITEMS[:formation] = {
:name => "编队",
:command => :command_formation,
:enable => :formation_enabled,
:help => '角色更换。'
}
COMMAND_ITEMS[:game_end] = {
:name => "终了",
:command => Scene_End,
:help => '结束游戏。'
}
COMMAND_ITEMS[:save] = {
:name => "存檔",
:command => Scene_Save,
:enable => "!$game_system.save_disabled",
:help => '储存进度。'
}
COMMAND_ITEMS[:load] = {
:name => "读取",
:command => Scene_Load,
:enable => "DataManager.save_file_exists?",
:help => '读取进度。'
}
#--------------------------------------------------------------------------
# ◇ 表示項目の設定
#--------------------------------------------------------------------------
COMMANDS = {}
COMMANDS[:main] = # 必須
[:item, :skill, :equip, :status, :formation,:save,:load,:sample,:file, :game_end]
COMMANDS[:sub_file] = [:save, :load]
COMMANDS[:sub_sample] = [:common, :levelup, :switch, :variable]
#--------------------------------------------------------------------------
# ◇ コマンドウィンドウの文字サイズ
#--------------------------------------------------------------------------
COMMAND_SIZE = 0
#--------------------------------------------------------------------------
# ◇ コマンドウィンドウの一行の縦幅
#--------------------------------------------------------------------------
# 0 で文字サイズを基準に自動調整
#--------------------------------------------------------------------------
COMMAND_HEIGHT = 0
#--------------------------------------------------------------------------
# ◇ 残りＨＰで顔グラを変化させる
#--------------------------------------------------------------------------
EXPRESSIVE_RATE = [0]
#--------------------------------------------------------------------------
# ◇ 立ち絵のファイル名
#--------------------------------------------------------------------------
PORTRAIT_NAME = "MActor%d"
#--------------------------------------------------------------------------
# ◇ コモンイベントの自動実行
#--------------------------------------------------------------------------
START_COMMON_ID = 0 # 開始前処理
TERMINATE_COMMON_ID = 0 # 終了前処理
#--------------------------------------------------------------------------
# ◇ 背景画像
#--------------------------------------------------------------------------
# 前景画像（最前面に表示されます。）
FILE_FOREGROUND = nil
# 背景画像（デフォルトのマップ画像と入れ替えます。）
FILE_BACKGROUND = nil
# アニメ画像 ["ファイル名", vx, vy, 最背面？]
BACKIMAGE = nil
#--------------------------------------------------------------------------
# ◇ システム文字の有無
#--------------------------------------------------------------------------
VISIBLE_SYSTEM = true
#--------------------------------------------------------------------------
# ◇ 用語設定
#--------------------------------------------------------------------------
VOCABS = {}
VOCABS[:gold] = "所持金钱"
VOCABS[:exp] = "経験値"
VOCABS[:exp_a] = "LvUP"
end # module CM
end # module CAO
#/////////////////////////////////////////////////////////////////////////////#
# #
# 下記のスクリプトを変更する必要はありません。 #
# #
#/////////////////////////////////////////////////////////////////////////////#
class CustomizeError < Exception; end
class Game_MenuItem
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
attr_reader :symbol #
attr_reader :sub #
attr_reader :enable #
attr_reader :refresh_items #
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def initialize(symbol, params = {})
@symbol = symbol # 項目の識別子
@name = params[:name] || "" # 項目名
@help = params[:help] || "" # ヘルプ
@icon = params[:icon] # アイコン番号
@enable = params[:enable] || true # 選択の可否
@hide = params[:hide] || false # 非表示の有無
@scene = params[:scene] # 項目処理シーン遷移
@command = params[:command] # 項目処理コマンド実行
@personal = params[:personal] # 項目処理アクター選択
@sub = params[:sub] # 項目処理サブコマンド
case [@scene, @command, @personal, @sub].count {|o| o }
when 0; raise CustomizeError, "項目処理が設定されていません。"
when 1 # Do Nothing
else; raise CustomizeError, "複数の項目処理が設定されています。"
end
@refresh_items = params[:refresh] || [] # 項目処理後に再描画
@auto_close = params[:auto_close] || false # アクター選択時コマンドを閉じる
@continue = params[:continue] || false # アクター選択継続
@sw_sub = params[:sw_sub] || false # サブ表示時にメインを非表示
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def _convert_value(obj)
if obj.is_a?(Array)
case obj[0]
when String
result = eval(obj[0], ::TOPLEVEL_BINDING)
return result if obj.size == 1
return obj[result ? 1 : 2] if result == !!result
return obj[result + 1]
when Integer
if obj.size == 3
return obj[$game_switches[obj[0]] ? 1 : 2]
else
return obj[$game_variables[obj[0]]]
end
else
raise "must not happen"
end
else
return obj
end
end
private :_convert_value
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def name
return _convert_value(@name)
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def help
return _convert_value(@help)
end
alias description help
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def icon_index
return _convert_value(@icon)
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def handler
return :command_ok if @scene
return @command if @command && @command.is_a?(Symbol)
return :command_ok if @command
return @personal if @personal && @personal.is_a?(Symbol)
return :command_personal if @personal
return :command_sub if @sub
raise "must not happen"
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def exec
#
# ここでエラーが発生した場合、項目の設定が間違っている可能性があります。
# 項目処理の設定を確認してください。
#
# エラーメッセージを確認の上、設定を修正してください。
# つづり間違いや文法が間違っている可能性があります。
#
if @scene
case @scene
when Class
return SceneManager.call(@scene.untaint)
when Symbol
return SceneManager.call(Kernel.const_get(@scene).untaint)
when String
return SceneManager.call(eval(@scene, ::TOPLEVEL_BINDING).untaint)
end
else
command = @command || @personal
case command
when Class
return SceneManager.call(command.untaint)
when String
return SceneManager.scene.instance_eval(command)
end
end
raise "must not happen"
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def hide?
#
# ここでエラーが発生した場合、項目の設定が間違っている可能性があります。
# オプションの :hide の設定を確認してください。
#
case @hide
when true, false
return @hide
when String
return eval(@hide, ::TOPLEVEL_BINDING)
else
raise "must not happen"
end
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def personal?
return @personal && true
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def refresh?
return !@refresh_items.empty?
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def switch?
return @sw_sub
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def auto_close?
return @auto_close
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def continue?
return @continue
end
end
class Scene_Menu::Game_Interpreter < Game_Interpreter
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
undef command_101 # 文章の表示
undef command_102 # 選択肢の表示
undef command_103 # 数値入力の処理
undef command_104 # アイテム選択の処理
undef command_105 # スクロール文章の表示
undef command_201 # 場所移動
undef command_204 # マップのスクロール
undef command_205 # 移動ルートの設定
undef command_217 # 隊列メンバーの集合
undef command_261 # ムービーの再生
undef command_301 # バトルの処理
undef command_351 # メニュー画面を開く
end
class Scene_Menu
#--------------------------------------------------------------------------
# ○ 開始後処理
#--------------------------------------------------------------------------
def post_start
super
if CAO::CM::START_COMMON_ID > 0
start_common_event(CAO::CM::START_COMMON_ID)
end
end
#--------------------------------------------------------------------------
# ○ 開始処理
#--------------------------------------------------------------------------
def start
super
@caller = []
create_command_window
create_status_window
create_option_window
end
#--------------------------------------------------------------------------
# ○ フレーム更新
#--------------------------------------------------------------------------
def update
super
update_backimage
update_command_window
update_status_window
update_option_window
end
#--------------------------------------------------------------------------
# ○ 終了前処理
#--------------------------------------------------------------------------
def pre_terminate
super
if CAO::CM::TERMINATE_COMMON_ID > 0
start_common_event(CAO::CM::TERMINATE_COMMON_ID)
end
end
#--------------------------------------------------------------------------
# ○ 終了処理
#--------------------------------------------------------------------------
def terminate
super
dispose_command_window
dispose_status_window
dispose_option_window
end
#--------------------------------------------------------------------------
# ○ 背景の作成
#--------------------------------------------------------------------------
def create_background
if CAO::CM::FILE_BACKGROUND
@background_sprite = Sprite.new
@background_sprite.bitmap = Cache.system(CAO::CM::FILE_BACKGROUND)
else
super
end
if CAO::CM::BACKIMAGE
@backimage_sprite = Plane.new
@backimage_sprite.bitmap = Cache.system(CAO::CM::BACKIMAGE[0])
@backimage_sprite.z = -1 if CAO::CM::BACKIMAGE[3]
end
if CAO::CM::FILE_FOREGROUND
@foreground_sprite = Sprite.new
@foreground_sprite.z = 1000
@foreground_sprite.bitmap = Cache.system(CAO::CM::FILE_FOREGROUND)
end
end
#--------------------------------------------------------------------------
# ○ 背景の解放
#--------------------------------------------------------------------------
def dispose_background
super
@backimage_sprite.dispose if @backimage_sprite
@foreground_sprite.dispose if @foreground_sprite
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def update_backimage
return unless @backimage_sprite
return unless CAO::CM::BACKIMAGE[1] && CAO::CM::BACKIMAGE[2]
@backimage_sprite.ox = (@backimage_sprite.ox - CAO::CM::BACKIMAGE[1]) % 999
@backimage_sprite.oy = (@backimage_sprite.oy - CAO::CM::BACKIMAGE[2]) % 999
end
#--------------------------------------------------------------------------
# ● コマンドウィンドウの作成
#--------------------------------------------------------------------------
def create_command_window
# Do Nothing
end
#--------------------------------------------------------------------------
# ● ステータスウィンドウの作成
#--------------------------------------------------------------------------
def create_status_window
# Do Nothing
end
#--------------------------------------------------------------------------
# ● オプションウィンドウの作成
#--------------------------------------------------------------------------
def create_option_window
# Do Nothing
end
#--------------------------------------------------------------------------
# ● コマンドウィンドウの更新
#--------------------------------------------------------------------------
def update_command_window
# Do Nothing
end
#--------------------------------------------------------------------------
# ● ステータスウィンドウの更新
#--------------------------------------------------------------------------
def update_status_window
# Do Nothing
end
#--------------------------------------------------------------------------
# ● オプションウィンドウの更新
#--------------------------------------------------------------------------
def update_option_window
# Do Nothing
end
#--------------------------------------------------------------------------
# ● コマンドウィンドウの解放
#--------------------------------------------------------------------------
def dispose_command_window
# Do Nothing
end
#--------------------------------------------------------------------------
# ● ステータスウィンドウの解放
#--------------------------------------------------------------------------
def dispose_status_window
# Do Nothing
end
#--------------------------------------------------------------------------
# ● オプションウィンドウの解放
#--------------------------------------------------------------------------
def dispose_option_window
# Do Nothing
end
#--------------------------------------------------------------------------
# ● コモンイベント予約判定
# イベントの呼び出しが予約されているならマップ画面へ遷移する。
#--------------------------------------------------------------------------
def check_common_event
SceneManager.goto(Scene_Map) if $game_temp.common_event_reserved?
end
#--------------------------------------------------------------------------
# ● コモンベントの実行
#--------------------------------------------------------------------------
def start_common_event(common_event_id)
if @status_window && @status_window.index >= 0
$game_party.menu_actor = $game_party.members[@status_window.index]
end
interpreter = Scene_Menu::Game_Interpreter.new
interpreter.setup($data_common_events[common_event_id].list)
interpreter.update while interpreter.running?
end
#--------------------------------------------------------------------------
# ● 現在アクティブなコマンドウィンドウ
#--------------------------------------------------------------------------
def current_console
@caller.last || @command_window
end
#--------------------------------------------------------------------------
# ● 以前操作していたコマンドウィンドウ
#--------------------------------------------------------------------------
def previous_console
@caller[-2] || @command_window
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def change_console(console)
@caller << console
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def return_console
current_console.deactivate.close
previous_console.activate.open
@caller.pop
end
#--------------------------------------------------------------------------
# ● コマンド実行後の処理
#--------------------------------------------------------------------------
def post_terminate
item = current_console.current_data
current_console.activate if !current_console.locked?
end
#--------------------------------------------------------------------------
# ● コマンド [決定]
#--------------------------------------------------------------------------
def command_ok
current_console.current_exec
post_terminate
check_common_event
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def command_sub
if current_console == @subcommand_window
raise CustomizeError, "サブコマンドからは呼び出せません。"
end
@command_window.close if @command_window.current_data.switch?
symbol = @command_window.current_data.sub
@subcommand_window.init_command(symbol)
@subcommand_window.clear_handler
@subcommand_window.set_handler(:cancel, method(:return_console))
@subcommand_window.set_handlers(self)
change_console(@subcommand_window)
open_sub_command
end
#--------------------------------------------------------------------------
# ○ コマンド［スキル］［装備］［ステータス］
#--------------------------------------------------------------------------
def command_personal
@status_window.select_last
@status_window.activate
@status_window.set_handler(:ok, method(:on_personal_ok))
@status_window.set_handler(:cancel, method(:on_personal_cancel))
current_console.close if current_console.current_data.auto_close?
end
#--------------------------------------------------------------------------
# ○ 個人コマンド [決定]
#--------------------------------------------------------------------------
def on_personal_ok
command_ok
if current_console.current_data.continue?
current_console.deactivate
@status_window.activate
end
end
#--------------------------------------------------------------------------
# ○ 個人コマンド［終了］
#--------------------------------------------------------------------------
def on_personal_cancel
@status_window.unselect
current_console.activate.open
end
#--------------------------------------------------------------------------
# ○ 並び替え［キャンセル］
#--------------------------------------------------------------------------
def on_formation_cancel
if @status_window.pending_index >= 0
@status_window.pending_index = -1
@status_window.activate
else
@status_window.unselect
current_console.activate.open
end
end
#--------------------------------------------------------------------------
# ● サブコマンドウィンドウを開く
#--------------------------------------------------------------------------
def open_sub_command
return if scene_changing?
@subcommand_window.activate.open
end
#--------------------------------------------------------------------------
# ● サブコマンドウィンドウを閉じる
#--------------------------------------------------------------------------
def close_sub_command
@subcommand_window.deactivate.close
end
end
module CustomMenuCommand
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(ident)
@ident = ident
super()
unlock
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def init_command(ident)
@ident = ident
end
#--------------------------------------------------------------------------
# ● 項目数の取得
#--------------------------------------------------------------------------
def item_max
@list.size
end
#--------------------------------------------------------------------------
# ● コマンドリストのクリア
#--------------------------------------------------------------------------
def clear_command_list
@list = []
end
#--------------------------------------------------------------------------
# ● コマンドリストの作成
#--------------------------------------------------------------------------
def make_command_list
return unless @ident
unless CAO::CM::COMMANDS[@ident]
raise CustomizeError,
"識別子 :#{@ident} のメニューコマンドの設定がありません。(COMMANDS)"
end
CAO::CM::COMMANDS[@ident].each do |symbol|
unless CAO::CM::COMMAND_ITEMS[symbol]
puts "識別子 :#{symbol} の項目の設定がありません。(COMMAND_ITEMS)"
next
end
item = Game_MenuItem.new(symbol, CAO::CM::COMMAND_ITEMS[symbol])
@list << item unless item.hide?
end
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def lock
@locked = true
self
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def unlock
@locked = false
self
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def locked?
@locked
end
#--------------------------------------------------------------------------
# ● コマンドの有効状態を取得
#--------------------------------------------------------------------------
def command_enabled?(index)
param = @list[index].enable
return false if @list[index].personal? && !$game_party.exists
return true if param == true
return false if param == false
return eval(param.to_s) if param.is_a?(Symbol) || param.is_a?(String)
raise "must not happen"
end
#--------------------------------------------------------------------------
# ● コマンド名の取得
#--------------------------------------------------------------------------
def command_name(index)
@list[index].name
end
#--------------------------------------------------------------------------
# ● コマンドアイコン番号の取得
#--------------------------------------------------------------------------
def command_icon_index(index)
return @list[index].icon_index
end
#--------------------------------------------------------------------------
# ● 選択項目のコマンドデータを取得
#--------------------------------------------------------------------------
def current_data
index >= 0 ? @list[index] : nil
end
#--------------------------------------------------------------------------
# ● 選択項目の有効状態を取得
#--------------------------------------------------------------------------
def current_item_enabled?
index >= 0 ? command_enabled?(index) : false
end
#--------------------------------------------------------------------------
# ● 選択項目のシンボルを取得
#--------------------------------------------------------------------------
def current_symbol
current_data ? current_data.symbol : nil
end
#--------------------------------------------------------------------------
# ● 選択項目のインデックスを取得
#--------------------------------------------------------------------------
def current_index
@list.index {|item| item.symbol == current_symbol }
end
#--------------------------------------------------------------------------
# ● 選択項目の実行
#--------------------------------------------------------------------------
def current_exec
current_data.exec
end
#--------------------------------------------------------------------------
# ● 指定されたシンボルを持つコマンドにカーソルを移動
#--------------------------------------------------------------------------
def select_symbol(symbol)
@list.each_index {|i| select(i) if @list[i].symbol == symbol }
end
#--------------------------------------------------------------------------
# ● ハンドラのクリア
#--------------------------------------------------------------------------
def clear_handler
@handler = {}
end
#--------------------------------------------------------------------------
# ● 動作に対応するハンドラの設定
#--------------------------------------------------------------------------
def set_handlers(obj)
#
# ここでエラーが発生した場合、項目の設定が間違っている可能性があります。
# 項目処理の設定を確認してください。
#
# NameError : undefined method `○○' for class `Scene_Menu'
# つづりが間違っていないか確認してください。
#
# NameError : undefined method `command_sub' for class `Scene_Menu'
# 『サブコマンド』スクリプトが未導入の可能性があります。
#
@list.each {|cmd| @handler[cmd.symbol] = obj.method(cmd.handler) }
end
end
class Window_CustomMenuCommand < Window_MenuCommand
include CustomMenuCommand
#--------------------------------------------------------------------------
# ● ウィンドウ内容の幅を計算
#--------------------------------------------------------------------------
def contents_width
(item_width + spacing) * col_max - spacing
end
#--------------------------------------------------------------------------
# ● 行の高さを取得
#--------------------------------------------------------------------------
def line_height
if CAO::CM::COMMAND_HEIGHT == 0
return default_font_size
else
return CAO::CM::COMMAND_HEIGHT
end
end
#--------------------------------------------------------------------------
# ● 横に項目が並ぶときの空白の幅を取得
#--------------------------------------------------------------------------
def spacing
return 8
end
#--------------------------------------------------------------------------
# ● 初期フォントサイズ
#--------------------------------------------------------------------------
def default_font_size
return Font.default_size if CAO::CM::COMMAND_SIZE == 0
return CAO::CM::COMMAND_SIZE
end
#--------------------------------------------------------------------------
# ● フォントサイズのリセット
#--------------------------------------------------------------------------
def reset_font_size
contents.font.size = default_font_size
end
#--------------------------------------------------------------------------
# ● カーソルを下に移動
#--------------------------------------------------------------------------
def cursor_down(wrap = false)
if index < item_max - col_max || (wrap && col_max == 1)
select((index + col_max) % item_max)
elsif col_max != 1 && index < (item_max.to_f/col_max).ceil*col_max-col_max
select(item_max - 1)
end
end
#--------------------------------------------------------------------------
# ● 項目の描画
#--------------------------------------------------------------------------
def draw_item(index)
rect = item_rect(index)
enabled = command_enabled?(index)
if command_icon_index(index)
draw_icon(command_icon_index(index), rect.x, rect.y, enabled)
rect.x += 26
rect.width -= 28
else
rect.x += 4
rect.width -= 8
end
change_color(normal_color, enabled)
draw_text(rect, command_name(index), alignment)
end
#--------------------------------------------------------------------------
# ● リフレッシュ
#--------------------------------------------------------------------------
def refresh
self.contents.clear
reset_font_size
draw_all_items
end
end
class Sprite_CustomMenuCursor < Sprite
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def initialize(data, viewport = nil)
super(viewport)
@filename = data[0]
@distance_x = data[1] || 1
@distance_y = data[2] || 1
@view_behind = data[3] || data[3] == nil
@flash_amount = data[4] || 0
self.bitmap = Cache.system(@filename)
self.z = @view_behind ? -1 : 1
self.ox = self.bitmap.width / 2
self.oy = self.bitmap.height / 2
self.opacity = 0
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def update
super
update_flash
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def update_flash
return if @flash_amount == 0
last_opacity = self.opacity
self.opacity += @flash_amount
@flash_amount *= -1 if self.opacity == last_opacity
end
end
class Spriteset_CustomMenuCommand
#--------------------------------------------------------------------------
# ● 定数
#--------------------------------------------------------------------------
OPEN_SPEED = 16
#--------------------------------------------------------------------------
# ● クラスインスタンス変数
#--------------------------------------------------------------------------
class << self
attr_accessor :last_command_symbol # カーソル位置保存用
end
#--------------------------------------------------------------------------
# ● 公開インスタンス変数
#--------------------------------------------------------------------------
attr_reader :index
attr_reader :openness
attr_reader :help_window # ヘルプウィンドウ
attr_accessor :x
attr_accessor :y
attr_accessor :viewport
attr_accessor :visible
attr_accessor :active
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize
@handler = {}
@index = -1
@x = 0
@y = 0
@visible = true
@active = false
@openness = 255 # 変更は self.openness で行なう
@opening = false
@closing = false
end
#--------------------------------------------------------------------------
# ● 項目数の取得 (要再定義)
#--------------------------------------------------------------------------
def item_max
return 0
end
#--------------------------------------------------------------------------
# ● コマンド名の取得 (要再定義)
#--------------------------------------------------------------------------
def command_name(index)
return ""
end
#--------------------------------------------------------------------------
# ● (要再定義)
#--------------------------------------------------------------------------
def command_filename
return ""
end
#--------------------------------------------------------------------------
# ● コマンド総数の取得 (要再定義)
#--------------------------------------------------------------------------
def command_max
return 0
end
#--------------------------------------------------------------------------
# ● カーソルデータの取得
#--------------------------------------------------------------------------
def cursor_data
return nil
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def dispose
dispose_command_sprites
dispose_cursor_sprite
end
#--------------------------------------------------------------------------
# ● スプライトの表示
#--------------------------------------------------------------------------
def show
self.visible = true
self
end
#--------------------------------------------------------------------------
# ● スプライトの非表示
#--------------------------------------------------------------------------
def hide
self.visible = false
self
end
#--------------------------------------------------------------------------
# ● スプライトのアクティブ化
#--------------------------------------------------------------------------
def activate
self.active = true
self
end
#--------------------------------------------------------------------------
# ● スプライトの非アクティブ化
#--------------------------------------------------------------------------
def deactivate
self.active = false
self
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def openness=(value)
@openness = value
update_openness
end
#--------------------------------------------------------------------------
# ● ウィンドウを開く
#--------------------------------------------------------------------------
def open
@opening = true unless open?
@closing = false
self
end
#--------------------------------------------------------------------------
# ● ウィンドウを閉じる
#--------------------------------------------------------------------------
def close
@closing = true unless close?
@opening = false
self
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def open?
@openness = 255 if @openness > 255
return @openness == 255
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def close?
@openness = 0 if @openness < 0
return @openness == 0
end
#--------------------------------------------------------------------------
# ● 開く処理の更新
#--------------------------------------------------------------------------
def update_open
@openness += OPEN_SPEED
@opening = false if open?
end
#--------------------------------------------------------------------------
# ● 閉じる処理の更新
#--------------------------------------------------------------------------
def update_close
@openness -= OPEN_SPEED
@closing = false if close?
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def visible=(value)
@visible = value
@cursor_sprite.visible = value if @cursor_sprite
end
#--------------------------------------------------------------------------
# ● カーソル位置の設定
#--------------------------------------------------------------------------
def index=(index)
@index = index
refresh
call_update_help
end
#--------------------------------------------------------------------------
# ● 項目の選択
#--------------------------------------------------------------------------
def select(index)
self.index = index if index && @index != index
end
#--------------------------------------------------------------------------
# ● 項目の選択解除
#--------------------------------------------------------------------------
def unselect
self.index = -1
end
#--------------------------------------------------------------------------
# ● 前回の選択位置を復帰
#--------------------------------------------------------------------------
def select_last
select_symbol(self.class.last_command_symbol)
end
#--------------------------------------------------------------------------
# ● 項目の選択位置を記憶
#--------------------------------------------------------------------------
def save_command_position
self.class.last_command_symbol = current_symbol
end
#--------------------------------------------------------------------------
# ● 前回の選択位置を削除
#--------------------------------------------------------------------------
def init_command_position
self.class.last_command_symbol = nil
end
#--------------------------------------------------------------------------
# ● 動作に対応するハンドラの設定
# method : ハンドラとして設定するメソッド (Method オブジェクト)
#--------------------------------------------------------------------------
def set_handler(symbol, method)
@handler[symbol] = method
end
#--------------------------------------------------------------------------
# ● ハンドラの存在確認
#--------------------------------------------------------------------------
def handle?(symbol)
@handler.include?(symbol)
end
#--------------------------------------------------------------------------
# ● ハンドラの呼び出し
#--------------------------------------------------------------------------
def call_handler(symbol)
@handler[symbol].call if handle?(symbol)
end
#--------------------------------------------------------------------------
# ● フレーム更新
#--------------------------------------------------------------------------
def update
update_cursor_sprite
update_command_sprites
update_openness
process_cursor_move
process_handling
end
#--------------------------------------------------------------------------
# ● 開閉更新
#--------------------------------------------------------------------------
def update_openness
return unless @command_sprites
update_open if @opening
update_close if @closing
@command_sprites.each {|sp| sp.opacity = @openness }
end
#--------------------------------------------------------------------------
# ● カーソルの移動処理
#--------------------------------------------------------------------------
def process_cursor_move
return unless cursor_movable?
last_index = @index
cursor_down (Input.trigger?(:DOWN)) if Input.repeat?(:DOWN)
cursor_up (Input.trigger?(:UP)) if Input.repeat?(:UP)
cursor_right(Input.trigger?(:RIGHT)) if Input.repeat?(:RIGHT)
cursor_left (Input.trigger?(:LEFT)) if Input.repeat?(:LEFT)
cursor_pagedown if !handle?(:pagedown) && Input.trigger?(:R)
cursor_pageup if !handle?(:pageup) && Input.trigger?(:L)
Sound.play_cursor if @index != last_index
end
#--------------------------------------------------------------------------
# ● 決定やキャンセルなどのハンドリング処理
#--------------------------------------------------------------------------
def process_handling
return unless active
return process_ok if Input.trigger?(:C)
return process_cancel if Input.trigger?(:B)
end
#--------------------------------------------------------------------------
# ● カーソルの移動可能判定
#--------------------------------------------------------------------------
def cursor_movable?
active && item_max > 0
end
#--------------------------------------------------------------------------
# ● カーソルを下に移動
#--------------------------------------------------------------------------
def cursor_down(wrap = false)
if @index + cursor_dy >= 0 && @index + cursor_dy < item_max || wrap
select((@index + cursor_dy) % item_max)
end
end
#--------------------------------------------------------------------------
# ● カーソルを上に移動
#--------------------------------------------------------------------------
def cursor_up(wrap = false)
if @index - cursor_dy >= 0 && @index - cursor_dy < item_max || wrap
select((@index - cursor_dy) % item_max)
end
end
#--------------------------------------------------------------------------
# ● カーソルを右に移動
#--------------------------------------------------------------------------
def cursor_right(wrap = false)
if @index + cursor_dx >= 0 && @index + cursor_dx < item_max || wrap
select((@index + cursor_dx) % item_max)
end
end
#--------------------------------------------------------------------------
# ● カーソルを左に移動
#--------------------------------------------------------------------------
def cursor_left(wrap = false)
if @index - cursor_dx >= 0 && @index - cursor_dx < item_max || wrap
select((@index - cursor_dx) % item_max)
end
end
#--------------------------------------------------------------------------
# ● カーソルを 1 ページ後ろに移動
#--------------------------------------------------------------------------
def cursor_pagedown
# Do Nothing
end
#--------------------------------------------------------------------------
# ● カーソルを 1 ページ前に移動
#--------------------------------------------------------------------------
def cursor_pageup
# Do Nothing
end
#--------------------------------------------------------------------------
# ● 決定ボタンが押されたときの処理
#--------------------------------------------------------------------------
def process_ok
save_command_position
if current_item_enabled?
Sound.play_ok
Input.update
deactivate
if handle?(current_symbol)
call_handler(current_symbol)
elsif handle?(:ok)
call_handler(:ok)
else
activate
end
else
Sound.play_buzzer
end
end
#--------------------------------------------------------------------------
# ● キャンセルボタンが押されたときの処理
#--------------------------------------------------------------------------
def process_cancel
Sound.play_cancel
Input.update
deactivate
call_handler(:cancel)
end
#--------------------------------------------------------------------------
# ● ヘルプウィンドウの設定
#--------------------------------------------------------------------------
def help_window=(help_window)
@help_window = help_window
call_update_help
end
#--------------------------------------------------------------------------
# ● ヘルプウィンドウ更新メソッドの呼び出し
#--------------------------------------------------------------------------
def call_update_help
update_help if active && @help_window
end
#--------------------------------------------------------------------------
# ● ヘルプウィンドウの更新
#--------------------------------------------------------------------------
def update_help
@help_window.clear
end
#--------------------------------------------------------------------------
# ● 主要コマンドの有効状態を取得
#--------------------------------------------------------------------------
def main_commands_enabled
$game_party.exists
end
#--------------------------------------------------------------------------
# ● 並び替えの有効状態を取得
#--------------------------------------------------------------------------
def formation_enabled
$game_party.members.size >= 2 && !$game_system.formation_disabled
end
#--------------------------------------------------------------------------
# ● セーブの有効状態を取得
#--------------------------------------------------------------------------
def save_enabled
!$game_system.save_disabled
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def create_cursor_sprite
unless cursor_data
raise CustomizeError, "カーソルの情報が設定されていません。"
end
return unless cursor_data[0]
return if cursor_data[0].empty?
@cursor_sprite = Sprite_CustomMenuCursor.new(cursor_data, viewport)
update_cursor_sprite
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def update_cursor_sprite
return unless @cursor_sprite
if !open? || !@visible
@cursor_sprite.visible = false
end
if @active
if @index < 0
@cursor_sprite.visible = false
else
@cursor_sprite.visible = true
@cursor_sprite.x = @command_sprites[@index].x
@cursor_sprite.y = @command_sprites[@index].y
@cursor_sprite.update
end
end
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def dispose_cursor_sprite
return unless @cursor_sprite
@cursor_sprite.dispose
end
#--------------------------------------------------------------------------
# ● カーソル画像の取得
#--------------------------------------------------------------------------
def cursor_bitmap
return nil unless cursor_data
return nil if cursor_data[0].empty?
return Cache.system(cursor_data[0])
end
#--------------------------------------------------------------------------
# ● カーソルの移動量
#--------------------------------------------------------------------------
def cursor_dx
return cursor_data[1]
end
#--------------------------------------------------------------------------
# ● カーソルの移動量
#--------------------------------------------------------------------------
def cursor_dy
return cursor_data[2]
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def item_rect(index)
rect = Rect.new(0, 0, 0, 0)
rect.x = @command_sprites[index].x
rect.y = @command_sprites[index].y
rect.width = @command_sprites[index].bitmap.width
rect.height = @command_sprites[index].bitmap.height
return rect
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def create_command_sprites
@command_sprites = Array.new(item_max) do |i|
sp = Sprite.new(viewport)
sp.bitmap = Bitmap.new(image_width(i), image_height(i))
sp.ox = sp.bitmap.width / 2
sp.oy = sp.bitmap.height / 2
yield(sp, i) if defined? yield
sp
end
end
#--------------------------------------------------------------------------
# ● フレーム更新
#--------------------------------------------------------------------------
def update_command_sprites
return unless @command_sprites
@command_sprites.each {|sp| sp.update }
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def dispose_command_sprites
return unless @command_sprites
@command_sprites.each do |sp|
sp.bitmap.dispose
sp.dispose
end
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def image_index(index)
result = 0
result += 1 if @index == index
result += 2 unless command_enabled?(index)
return result
end
#--------------------------------------------------------------------------
# ● src_rect
#--------------------------------------------------------------------------
def image_rect(index)
rect = @command_sprites[index].bitmap.rect
if multi_image?
rect.x = @command_sprites[index].bitmap.width * image_index(index)
rect.y = @command_sprites[index].bitmap.height * index
else
rect.x = 0
rect.y = @command_sprites[index].bitmap.height * image_index(index)
end
return rect
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def refresh_command(index)
bitmap = @command_sprites[index].bitmap
bitmap.clear
bitmap.blt(0, 0, command_image(index), image_rect(index))
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def refresh_commands
@command_sprites.each_with_index do |sp, i|
refresh_command(i)
yield(sp, i) if defined? yield
end
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def command_image(index)
if multi_image?
Cache.system(command_filename)
else
Cache.system(command_name(index))
end
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def multi_image?
return !command_filename.empty?
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def image_width(index)
return command_image(index).width / 4 if multi_image?
return command_image(index).width
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def image_height(index)
return command_image(index).height / command_max if multi_image?
return command_image(index).height / 4
end
end
class Game_Actor
#--------------------------------------------------------------------------
# ● 公開インスタンス変数
#--------------------------------------------------------------------------
attr_accessor :portrait_name # 立ち絵ファイル名
#--------------------------------------------------------------------------
# ● 立ち絵のファイル名を取得
#--------------------------------------------------------------------------
def portrait_name
filename = @portrait_name ? @portrait_name : CAO::CM::PORTRAIT_NAME
return sprintf(filename, self.id, self.expression_index)
end
#--------------------------------------------------------------------------
# ● 表情のインデックス
#--------------------------------------------------------------------------
def expression_index
rate = (self.hp_rate * 100).ceil
index = CAO::CM::EXPRESSIVE_RATE.index {|r| r < rate }
return index || CAO::CM::EXPRESSIVE_RATE.size
end
#--------------------------------------------------------------------------
# ● 経験値の割合を取得
#--------------------------------------------------------------------------
def cm_exp_rate
return 1.0 if max_level?
return self.cm_accumulated_exp / self.cm_requisite_exp.to_f
end
#--------------------------------------------------------------------------
# ● レベルアップに必要な経験値を取得
#--------------------------------------------------------------------------
def cm_requisite_exp
return 0 if max_level?
return self.next_level_exp - self.current_level_exp
end
#--------------------------------------------------------------------------
# ● 獲得した経験値を取得 (現レベル)
#--------------------------------------------------------------------------
def cm_accumulated_exp
return self.exp - self.current_level_exp
end
#--------------------------------------------------------------------------
# ● レベルアップに必要な残りの経験値を取得
#--------------------------------------------------------------------------
def cm_remaining_exp
return 0 if max_level?
return self.next_level_exp - self.exp
end
end
class CAO::CM::Canvas
include CAO::CM
#--------------------------------------------------------------------------
# ● 公開インスタンス変数
#--------------------------------------------------------------------------
attr_reader :window
attr_reader :bitmap
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(obj)
case obj
when Window
@window = obj
@bitmap = obj.contents
when Bitmap
@window = nil
@bitmap = obj
else
raise TypeError,
"wrong argument type #{obj.class} (expected Bitmap or Window)"
end
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def contents
return @window ? @window.contents : @bitmap
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def draw_actor_items(actor, x, y, list)
#
# メニューステータスの設定が間違っている可能性があります。
# 表示項目の設定を確認してください。
#
# TypeError
# 引数の型(数値や文字列など)が間違っています。
# 設定がずれているかもしれません。
# 設定は必ず [シンボル, 数値, 数値, ... ] の形で始まります。
# 識別子とｘ座標とｙ座標の設定は省略できません。
#
# ArgumentError : wrong number of arguments
# 引数の数が間違っています。
# オプション部分の設定に間違いがないか確認してください。
#
list.each do |params|
symbol = params[0]
argv = params[1, params.size]
xx, yy = argv[0], argv[1]
unless METHODS_NAME[symbol]
puts "識別子 :#{symbol} の処理は定義されていません。"
next
end
unless xx && yy
raise CustomizeError, "描画する座標が設定されていません。"
end
begin
opt = (argv.size <= 2) ? [] : argv[2, argv.size - 2]
eval("#{METHODS_NAME[symbol]}(actor, x + xx, y + yy, *opt)")
rescue
msg = "{ Actor(#{actor.respond_to?(:id)&&actor.id}) "
msg << "Symbol(:#{symbol}) Method(#{METHODS_NAME[symbol]}) }\n"
msg << $!.message
raise $!, msg, $!.backtrace
end
end
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
METHODS_NAME = {}
METHODS_NAME[:w_chara] = '@window.draw_actor_graphics'
METHODS_NAME[:w_face] = '@window.draw_actor_face'
METHODS_NAME[:w_name] = '@window.draw_actor_name'
METHODS_NAME[:w_class] = '@window.draw_actor_class'
METHODS_NAME[:w_nick] = '@window.draw_actor_nickname'
METHODS_NAME[:w_level] = '@window.draw_actor_level'
METHODS_NAME[:w_state] = '@window.draw_actor_icons'
METHODS_NAME[:w_hp] = '@window.draw_actor_hp'
METHODS_NAME[:w_mp] = '@window.draw_actor_mp'
METHODS_NAME[:w_tp] = '@window.draw_actor_tp'
if CAO::CM::EXPRESSIVE_RATE.empty?
METHODS_NAME[:face] = :draw_actor_face
else
METHODS_NAME[:face] = :draw_actor_expression
end
METHODS_NAME[:chara] = :draw_actor_graphic
METHODS_NAME[:name] = :draw_actor_name
METHODS_NAME[:class] = :draw_actor_class
METHODS_NAME[:nick] = :draw_actor_nickname
METHODS_NAME[:level] = :draw_actor_level
METHODS_NAME[:lv_g] = :draw_actor_level_g
METHODS_NAME[:state] = :draw_actor_icons
METHODS_NAME[:hp] = :draw_actor_hp
METHODS_NAME[:mp] = :draw_actor_mp
METHODS_NAME[:tp] = :draw_actor_tp
METHODS_NAME[:exp] = :draw_actor_exp
METHODS_NAME[:param] = :draw_actor_param
METHODS_NAME[:icon] = :draw_actor_icon
METHODS_NAME[:bust] = :draw_actor_portrait
METHODS_NAME[:fill] = :draw_actor_rect
METHODS_NAME[:pict] = :draw_actor_picture
METHODS_NAME[:text] = :draw_actor_text
METHODS_NAME[:num] = :draw_actor_number
#--------------------------------------------------------------------------
# ● 定数
#--------------------------------------------------------------------------
COLOR_AIB_1 = Color.new(0, 0, 0) # アクターアイコンの縁の色
COLOR_AIB_2 = Color.new(255, 255, 255) # アクターアイコンの背景色
#--------------------------------------------------------------------------
# ● 行の高さを取得
#--------------------------------------------------------------------------
def line_height
return 24
end
#--------------------------------------------------------------------------
# ● 半透明描画用のアルファ値を取得
#--------------------------------------------------------------------------
def translucent_alpha
return 160
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def str2color(value)
case value
when Color
return value
when Array
return Color.new(*value)
when Integer
num = value
when Symbol, String
text = value.to_s.sub(/^(0x|x)/, "")
case text.size
when 1; text = text * 6 << 'FF'
when 2; text = text[0] * 6 << text[1] * 2
when 3; text = text[0] * 2 << text[1] * 2 << text[2] * 2 << 'FF'
when 4; text = text[0] * 2 << text[1] * 2 << text[2] * 2 << text[3] * 2
when 6; text = text[0, 6] << 'FF'
end
num = eval("0x#{text}")
end
return Color.new(num >> 24, num >> 16 & 255, num >> 8 & 255, num & 255)
end
#--------------------------------------------------------------------------
# ● 文字色取得
# n : 文字色番号（0..31）
#--------------------------------------------------------------------------
def text_color(n, enabled = true)
color = Cache.system("Window").get_pixel(64+(n%8)*8, 96+(n/8)*8)
color.alpha = translucent_alpha unless enabled
return color
end
#--------------------------------------------------------------------------
# ● 各種文字色の取得
#--------------------------------------------------------------------------
def normal_color; text_color(0); end; # 通常
def system_color; text_color(16); end; # システム
def crisis_color; text_color(17); end; # ピンチ
def knockout_color; text_color(18); end; # 戦闘不能
def gauge_back_color; text_color(19); end; # ゲージ背景
def hp_gauge_color1; text_color(20); end; # HP ゲージ 1
def hp_gauge_color2; text_color(21); end; # HP ゲージ 2
def mp_gauge_color1; text_color(22); end; # MP ゲージ 1
def mp_gauge_color2; text_color(23); end; # MP ゲージ 2
def mp_cost_color; text_color(23); end; # 消費 MP
def power_up_color; text_color(24); end; # 装備パワーアップ
def power_down_color; text_color(25); end; # 装備パワーダウン
def tp_gauge_color1; text_color(28); end; # TP ゲージ 1
def tp_gauge_color2; text_color(29); end; # TP ゲージ 2
def tp_cost_color; text_color(29); end; # 消費 TP
def exp_gauge_color1; text_color(30); end; # EXP ゲージ 1
def exp_gauge_color2; text_color(31); end; # EXP ゲージ 2
#--------------------------------------------------------------------------
# ● 保留項目の背景色を取得
#--------------------------------------------------------------------------
def pending_color
Cache.system("Window").get_pixel(80, 80)
end
#--------------------------------------------------------------------------
# ● テキスト描画色の変更
#--------------------------------------------------------------------------
def change_color(color, enabled = true)
if block_given?
last_color = self.contents.font.color.dup
change_color(color, enabled)
yield
self.contents.font.color = last_color
else
self.contents.font.color.set(color)
self.contents.font.color.alpha = translucent_alpha unless enabled
end
end
#--------------------------------------------------------------------------
# ● テキストサイズの変更
#--------------------------------------------------------------------------
def change_size(size)
if block_given?
last_size = self.contents.font.size
change_size(size)
yield
self.contents.font.size = last_size
else
self.contents.font.size = size
end
end
#--------------------------------------------------------------------------
# ● テキストの描画
#--------------------------------------------------------------------------
def draw_text(*args)
contents.draw_text(*args)
end
#--------------------------------------------------------------------------
# ● テキストサイズの取得
#--------------------------------------------------------------------------
def text_size(str)
contents.text_size(str)
end
#--------------------------------------------------------------------------
# ● 制御文字つきテキストの描画
#--------------------------------------------------------------------------
def draw_text_ex(x, y, text)
reset_font_settings
text = convert_escape_characters(text)
pos = {:x => x, :y => y, :new_x => x, :height => calc_line_height(text)}
process_character(text.slice!(0, 1), text, pos) until text.empty?
end
#--------------------------------------------------------------------------
# ● フォント設定のリセット
#--------------------------------------------------------------------------
def reset_font_settings
change_color(normal_color)
contents.font.size = Font.default_size
contents.font.bold = Font.default_bold
contents.font.italic = Font.default_italic
end
#--------------------------------------------------------------------------
# ● 制御文字の事前変換
# 実際の描画を始める前に、原則として文字列に変わるものだけを置き換える。
# 文字「\」はエスケープ文字（\e）に変換。
#--------------------------------------------------------------------------
def convert_escape_characters(text)
result = text.to_s.clone
result.gsub!(/\r\n/) { "\n" }
result.gsub!(/\\/) { "\e" }
result.gsub!(/\e\e/) { "\\" }
result.gsub!(/\e({+)/i) { "\e{" * $1.count("{") }
result.gsub!(/\e(}+)/i) { "\e}" * $1.count("}") }
result.gsub!(/\eV\[(\d+)\]/i) { $game_variables[$1.to_i] }
result.gsub!(/\eV\[(\d+)\]/i) { $game_variables[$1.to_i] }
result.gsub!(/\eS\[(\d+),(.*?),(.*?)\]/i) { $game_switches[$1.to_i]?$2:$3 }
result.gsub!(/\eN\[(\d+)\]/i) { actor_name($1.to_i) }
result.gsub!(/\eP\[(\d+)\]/i) { party_member_name($1.to_i) }
result.gsub!(/\eG/i) { Vocab::currency_unit }
result.gsub!(/\e\$/) { $game_party.gold }
result.gsub!(/\eW/) { $game_party.steps }
result.gsub!(/\eT\[(.+?)\]/i) { play_time($1) }
result.gsub!(/\eT/i) { play_time }
result.gsub!(/\en/) { "\n" }
result.gsub!(/<%(.*?)%>/) { eval($1) }
result
end
#--------------------------------------------------------------------------
# ● アクター n 番の名前を取得
#--------------------------------------------------------------------------
def actor_name(n)
actor = n >= 1 ? $game_actors[n] : nil
actor ? actor.name : ""
end
#--------------------------------------------------------------------------
# ● パーティメンバー n 番の名前を取得
#--------------------------------------------------------------------------
def party_member_name(n)
actor = n >= 1 ? $game_party.members[n - 1] : nil
actor ? actor.name : ""
end
#--------------------------------------------------------------------------
# ● を取得
#--------------------------------------------------------------------------
def play_time(format = '%3d:%02d:%02d')
total = Graphics.frame_count / Graphics.frame_rate
return sprintf(format,
(total / 3600), (total / 60 % 60), (total % 60), (total / 60), total)
end
#--------------------------------------------------------------------------
# ● 文字の処理
# c : 文字
# text : 描画処理中の文字列バッファ（必要なら破壊的に変更）
# pos : 描画位置 {:x, :y, :new_x, :height}
#--------------------------------------------------------------------------
def process_character(c, text, pos)
case c
when "\n" # 改行
process_new_line(text, pos)
when "\e" # 制御文字
process_escape_character(obtain_escape_code(text), text, pos)
else # 普通の文字
process_normal_character(c, pos)
end
end
#--------------------------------------------------------------------------
# ● 通常文字の処理
#--------------------------------------------------------------------------
def process_normal_character(c, pos)
text_width = text_size(c).width
draw_text(pos[:x], pos[:y], text_width * 2, pos[:height], c)
pos[:x] += text_width
end
#--------------------------------------------------------------------------
# ● 改行文字の処理
#--------------------------------------------------------------------------
def process_new_line(text, pos)
pos[:x] = pos[:new_x]
pos[:y] += pos[:height]
pos[:height] = calc_line_height(text)
end
#--------------------------------------------------------------------------
# ● 制御文字の本体を破壊的に取得
#--------------------------------------------------------------------------
def obtain_escape_code(text)
text.slice!(/^[\$\.\|\^!><\{\}\\]|^[A-Z]+/i)
end
#--------------------------------------------------------------------------
# ● 制御文字の引数を破壊的に取得
#--------------------------------------------------------------------------
def obtain_escape_param(text)
text.slice!(/^\[-?\d+\]/)[/-?\d+/].to_i rescue 0
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def obtain_escape_value(text, value)
text.slice!(/^\[([+-]?)(\d+)\]/i)
return value + $2.to_i if $1 == '+'
return value - $2.to_i if $1 == '-'
return $2.to_i
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def obtain_escape_picparam(text)
return [] unless text.slice!(/^\[(.+?)\]/)
params = $1.split(',')
params.each {|s| s.strip! }
return params
end
#--------------------------------------------------------------------------
# ● 制御文字の処理
# code : 制御文字の本体部分（「\C[1]」なら「C」）
#--------------------------------------------------------------------------
def process_escape_character(code, text, pos)
case code.upcase
when 'C'
change_color(text_color(obtain_escape_param(text)))
when 'I'
#~ process_draw_icon(obtain_escape_param(text), pos)
if text[/^\[\d+\]/]
process_draw_icon(obtain_escape_param(text), pos)
else
process_draw_picture(obtain_escape_picparam(text))
end
when '{'
make_font_bigger
when '}'
make_font_smaller
when 'X'
pos[:x] = obtain_escape_value(text, pos[:x])
when 'Y'
pos[:y] = obtain_escape_value(text, pos[:y])
when 'L'
process_draw_line(text, pos)
end
end
#--------------------------------------------------------------------------
# ● 制御文字によるライン描画の処理
#--------------------------------------------------------------------------
def process_draw_line(text, pos)
if text.slice!(/^\[(\d+)\s*,\s*(\d+)(?:\s*,\s*([AFHTMBXS]+))?\]/i)
x, y, w, h, params = pos[:x], pos[:y], $1.to_i, $2.to_i, ($3 || "")
# 描画幅を文字サイズから (A:自動,F:全角,H:半角)
case params
when /A/i; w = text_size(text[0, w]).width
when /F/i; w = text_size("　" * w).width
when /H/i; w = text_size(" " * w).width
end
# 線の描画位置 (t:上,m:中,b:下, デフォルトは下)
unless params[/T/i]
if params[/M/i]
y += (pos[:height] + h) / 2
else
y += pos[:height] - h
end
end
# 影の描画
if params[/S/i]
w -= 1
color = gauge_back_color
color.alpha = translucent_alpha
self.contents.fill_rect(x + 1, y + 1, w, h, color)
end
# 線の描画
self.contents.fill_rect(x, y, w, h, self.contents.font.color)
# ｘ座標を進める
x += w if params[/X/i]
elsif text.slice!(/^\[([0-9, ]+?)(0x[0-9A-F]+)?\]/i)
color = $2
param = $1.sub(/, *$/, '').split(',').map {|s| s.to_i }
if param.is_a?(Array) && param.size == 4
if color
draw_fill_rect(*param, str2color(color))
else
self.contents.fill_rect(*param, self.contents.font.color)
end
end
end
end
#--------------------------------------------------------------------------
# ● 制御文字によるアイコン描画の処理
#--------------------------------------------------------------------------
def process_draw_icon(icon_index, pos)
draw_icon(icon_index, pos[:x], pos[:y] + (pos[:height] - 24) / 2)
pos[:x] += 24
end
#--------------------------------------------------------------------------
# ● 制御文字によるピクチャ描画の処理
#--------------------------------------------------------------------------
def process_draw_picture(params)
return if params.empty?
bitmap = Cache.picture(params[0] || "")
x = (params[1] || 0).to_i
y = (params[2] || 0).to_i
opacity = (params[3] || 255).to_i
hue = (params[4] || 0).to_i
if hue != 0
bitmap = bitmap.dup
bitmap.hue_change(hue)
end
contents.blt(x, y, bitmap, bitmap.rect, opacity)
end
#--------------------------------------------------------------------------
# ● フォントを大きくする
#--------------------------------------------------------------------------
def make_font_bigger
contents.font.size += 4 if contents.font.size <= 92
end
#--------------------------------------------------------------------------
# ● フォントを小さくする
#--------------------------------------------------------------------------
def make_font_smaller
contents.font.size -= 4 if contents.font.size >= 10
end
#--------------------------------------------------------------------------
# ● 行の高さを計算
# restore_font_size : 計算後にフォントサイズを元に戻す
#--------------------------------------------------------------------------
def calc_line_height(text, restore_font_size = true)
result = [line_height, contents.font.size].max
last_font_size = contents.font.size
text.slice(/^.*$/).scan(/\e[\{\}]/).each do |esc|
make_font_bigger if esc == "\e{"
make_font_smaller if esc == "\e}"
result = [result, contents.font.size].max
end
contents.font.size = last_font_size if restore_font_size
result
end
#--------------------------------------------------------------------------
# ●
#--------------------------------------------------------------------------
def draw_fill_rect(x, y, width, height, color)
bitmap = Bitmap.new(width, height)
bitmap.fill_rect(bitmap.rect, color)
self.contents.blt(x, y, bitmap, bitmap.rect)
bitmap.dispose
end
#--------------------------------------------------------------------------
# ● ゲージの描画
# rate : 割合（1.0 で満タン）
# color1 : グラデーション左端
# color2 : グラデーション右端
#--------------------------------------------------------------------------
def draw_gauge(x, y, width, rate, color1, color2)
fill_w = (width * rate).to_i
gauge_y = y + line_height - 8
contents.fill_rect(x, gauge_y, width, 6, gauge_back_color)
contents.gradient_fill_rect(x, gauge_y, fill_w, 6, color1, color2)
end
#--------------------------------------------------------------------------
# ● アイコンの描画
#--------------------------------------------------------------------------
def draw_icon(icon_index, x, y, enabled = true)
bitmap = Cache.system("Iconset")
rect = Rect.new(icon_index % 16 * 24, icon_index / 16 * 24, 24, 24)
contents.blt(x, y, bitmap, rect, enabled ? 255 : translucent_alpha)
end
#--------------------------------------------------------------------------
# ● 顔グラフィックの描画
#--------------------------------------------------------------------------
def draw_face(face_name, face_index, x, y, size = 96, enabled = true)
bitmap = Cache.face(face_name)
dest_rect = Rect.new(x, y, 96, 96)
src_rect = Rect.new(face_index % 4 * 96, face_index / 4 * 96, 96, 96)
opacity = enabled ? 255 : translucent_alpha
case size
when Integer
src_rect.x += (96 - size) / 2
src_rect.y += (96 - size) / 2
src_rect.width = size
src_rect.height = size
contents.blt(x, y, bitmap, src_rect, opacity)
when Array
case size.size
when 1
dest_rect.width, dest_rect.height = size[0], size[0]
when 2
dest_rect.width, dest_rect.height = size[0], size[1]
when 4
dest_rect.width, dest_rect.height = size[2], size[3]
src_rect.width, src_rect.height = size[2], size[3]
src_rect.x, src_rect.y = src_rect.x + size[0], src_rect.y + size[1]
else
raise "wrong number of elements (#{size.size} of 2)"
end
contents.stretch_blt(dest_rect, bitmap, src_rect, opacity)
else
raise TypeError,
"wrong argument type #{size.class} (expected Integer or Array)"
end
end
#--------------------------------------------------------------------------
# ● 歩行グラフィックの描画
#--------------------------------------------------------------------------
def draw_character(character_name, character_index, x, y)
return unless character_name
bitmap = Cache.character(character_name)
sign = character_name[/^[\!\$]./]
if sign && sign.include?('
请问这要怎么解决？感谢。
)
cw = bitmap.width / 3
ch = bitmap.height / 4
else
cw = bitmap.width / 12
ch = bitmap.height / 8
end
n = character_index
src_rect = Rect.new((n%4*3+1)*cw, (n/4*4)*ch, cw, ch)
contents.blt(x - cw / 2, y - ch, bitmap, src_rect)
end
#--------------------------------------------------------------------------
# ● HP の文字色を取得
#--------------------------------------------------------------------------
def hp_color(actor)
return knockout_color if actor.hp == 0
return crisis_color if actor.hp < actor.mhp / 4
return normal_color
end
#--------------------------------------------------------------------------
# ● MP の文字色を取得
#--------------------------------------------------------------------------
def mp_color(actor)
return crisis_color if actor.mp < actor.mmp / 4
return normal_color
end
#--------------------------------------------------------------------------
# ● TP の文字色を取得
#--------------------------------------------------------------------------
def tp_color(actor)
return normal_color
end
#--------------------------------------------------------------------------
# ● アクターの歩行グラフィック描画
#--------------------------------------------------------------------------
def draw_actor_graphic(actor, x, y)
draw_character(actor.character_name, actor.character_index, x, y)
end
#--------------------------------------------------------------------------
# ● アクターの顔グラフィック描画
#--------------------------------------------------------------------------
def draw_actor_face(actor, x, y, size = 96)
draw_face(actor.face_name, actor.face_index, x, y, size)
end
#--------------------------------------------------------------------------
# ● アクターの表情グラフィック描画
#--------------------------------------------------------------------------
def draw_actor_expression(actor, x, y, size = 96)
draw_face(actor.face_name, actor.expression_index, x, y, size)
end
#--------------------------------------------------------------------------
# ● 歩行アイコンの描画
# enabled : 有効フラグ。false のとき半透明で描画
#--------------------------------------------------------------------------
def draw_actor_icon(actor, x, y, enabled = true)
return unless actor
self.contents.fill_rect(x, y, 24, 24, COLOR_AIB_1)
self.contents.fill_rect(x + 1, y + 1, 22, 22, COLOR_AIB_2)
return unless actor.character_name
return if actor.character_name.empty?
bitmap = Cache.character(actor.character_name)
sign = actor.character_name[/^[\!\$]./]
if sign != nil and sign.include?('
请问这要怎么解决？感谢。
)
cw = bitmap.width / 3
ch = bitmap.height / 4
else
cw = bitmap.width / 12
ch = bitmap.height / 8
end
n = actor.character_index
src_rect = Rect.new((n%4*3+1)*cw, (n/4*4)*ch, 20, 20)
src_rect.x += (cw - src_rect.width) / 2
src_rect.y += (ch - src_rect.height) / 4
opacity = (enabled ? 255 : translucent_alpha)
self.contents.blt(x + 2, y + 2, bitmap, src_rect, opacity)
end
#--------------------------------------------------------------------------
# ● 立ち絵の描画
#--------------------------------------------------------------------------
def draw_actor_portrait(actor, x, y, enabled = true)
return unless actor
bitmap = Cache.picture(actor.portrait_name)
opacity = (enabled ? 255 : translucent_alpha)
self.contents.blt(x, y, bitmap, bitmap.rect, opacity)
end
#--------------------------------------------------------------------------
# ● の描画
# [:pict, x, y, "file", "script"]
# [:pict, x, y, ["file","file"], "script"]
#--------------------------------------------------------------------------
def draw_actor_picture(actor, x, y, file, script = nil)
return unless actor
battler, alternate = file
if script
filename = (eval(script) ? battler : alternate)
else
filename = (actor.battle_member? ? battler : alternate) || battler
end
if filename && !filename.empty?
bitmap = Cache.picture(filename % actor.id)
self.contents.blt(x, y, bitmap, bitmap.rect)
end
end
#--------------------------------------------------------------------------
# ● の描画
#--------------------------------------------------------------------------
def draw_actor_text(actor, x, y, text, script = nil)
return if script && !eval(script)
draw_text_ex(x, y, text.gsub(/\\{(\w+?)}/) { actor.__send__($1) })
end
#--------------------------------------------------------------------------
# ● の描画
#--------------------------------------------------------------------------
def draw_actor_number(actor, x, y, num, file)
bitmap = Cache.picture(file)
r_num = Rect.new(0, 0, bitmap.width / 13, bitmap.height)
param = String(num.is_a?(String) ? eval(num) : num)
param.split(//).each_with_index do |c,i|
case c
when ' '; next
when '+'; index = 10
when '-'; index = 11
when /\d/; index = Integer(c)
else; index = 12
end
r_num.x = r_num.width * index
self.contents.blt(x + r_num.width * i, y, bitmap, r_num)
end
end
#--------------------------------------------------------------------------
# ● 名前の描画
#--------------------------------------------------------------------------
def draw_actor_name(actor, x, y, width = 124)
change_color(hp_color(actor))
draw_text(x, y, width, line_height, actor.name)
end
#--------------------------------------------------------------------------
# ● 職業の描画
#--------------------------------------------------------------------------
def draw_actor_class(actor, x, y, width = 124)
change_color(normal_color)
draw_text(x, y, width, line_height, actor.class.name)
end
#--------------------------------------------------------------------------
# ● 二つ名の描画
#--------------------------------------------------------------------------
def draw_actor_nickname(actor, x, y, width = 124)
change_color(normal_color)
draw_text(x, y, width, line_height, actor.nickname)
end
#--------------------------------------------------------------------------
# ● レベルの描画
#--------------------------------------------------------------------------
def draw_actor_level(actor, x, y, width = 64)
if VISIBLE_SYSTEM
change_color(system_color)
draw_text(x, y, 32, line_height, Vocab::level_a)
end
change_color(normal_color)
draw_text(x + width - 32, y, 32, line_height, actor.level, 2)
end
#--------------------------------------------------------------------------
# ● レベルの描画 (経験値ゲージ付)
#--------------------------------------------------------------------------
def draw_actor_level_g(actor, x, y, width = 64)
draw_gauge(x,y,width,actor.cm_exp_rate,exp_gauge_color1,exp_gauge_color2)
if VISIBLE_SYSTEM
change_color(system_color)
draw_text(x, y, 32, line_height, Vocab::level_a)
end
change_color(tp_color(actor))
draw_text(x + width - 32, y, 32, line_height, actor.level, 2)
end
#--------------------------------------------------------------------------
# ● ステートおよび強化／弱体のアイコンを描画
#--------------------------------------------------------------------------
def draw_actor_icons(actor, x, y, width = 96, align = 0)
icons = (actor.state_icons + actor.buff_icons)[0, width / 24]
case align
when 0; left = 0
when 1; left = (width - icons.size * 24) / 2
when 2; left = (width - icons.size * 24)
end
icons.each_with_index {|n, i| draw_icon(n, x + left + 24 * i, y) }
end
#--------------------------------------------------------------------------
# ● 現在値／最大値を分数形式で描画
#--------------------------------------------------------------------------
def draw_current_and_max_values(x, y, width, current, max, color1, color2)
change_color(color1)
xr = x + width
if width < 96
draw_text(xr - 40, y, 42, line_height, current, 2)
else
draw_text(xr - 92, y, 42, line_height, current, 2)
change_color(color2)
draw_text(xr - 52, y, 12, line_height, "/", 2)
draw_text(xr - 42, y, 42, line_height, max, 2)
end
end
#--------------------------------------------------------------------------
# ● HP の描画
#--------------------------------------------------------------------------
def draw_actor_hp(actor, x, y, width = 124)
draw_gauge(x, y, width, actor.hp_rate, hp_gauge_color1, hp_gauge_color2)
if VISIBLE_SYSTEM
change_color(system_color)
draw_text(x, y, 30, line_height, Vocab::hp_a)
end
draw_current_and_max_values(x, y, width, actor.hp, actor.mhp,
hp_color(actor), normal_color)
end
#--------------------------------------------------------------------------
# ● MP の描画
#--------------------------------------------------------------------------
def draw_actor_mp(actor, x, y, width = 124)
draw_gauge(x, y, width, actor.mp_rate, mp_gauge_color1, mp_gauge_color2)
if VISIBLE_SYSTEM
change_color(system_color)
draw_text(x, y, 30, line_height, Vocab::mp_a)
end
draw_current_and_max_values(x, y, width, actor.mp, actor.mmp,
mp_color(actor), normal_color)
end
#--------------------------------------------------------------------------
# ● TP の描画
#--------------------------------------------------------------------------
def draw_actor_tp(actor, x, y, width = 124)
draw_gauge(x, y, width, actor.tp_rate, tp_gauge_color1, tp_gauge_color2)
if VISIBLE_SYSTEM
change_color(system_color)
draw_text(x, y, 30, line_height, Vocab::tp_a)
end
change_color(tp_color(actor))
draw_text(x + width - 42, y, 42, line_height, actor.tp.to_i, 2)
end
#--------------------------------------------------------------------------
# ● 経験値の描画
#--------------------------------------------------------------------------
def draw_actor_exp(actor, x, y, width = 124)
draw_gauge(x, y, width, actor.cm_exp_rate,
exp_gauge_color1, exp_gauge_color2)
if VISIBLE_SYSTEM
change_color(system_color)
draw_text(x, y, width, line_height, VOCABS[:exp_a])
end
change_color(normal_color)
draw_text(x, y, width, line_height, actor.cm_remaining_exp, 2)
end
#--------------------------------------------------------------------------
# ● 経験値情報の描画
#--------------------------------------------------------------------------
def draw_actor_exp_info(actor, x, y, width = 124)
s1 = actor.max_level? ? "-------" : actor.exp
s2 = actor.max_level? ? "-------" : actor.cm_remaining_exp
s_next = sprintf(Vocab::ExpNext, Vocab::level)
change_color(system_color)
draw_text(x, y + line_height * 0, 180, line_height, Vocab::ExpTotal)
draw_text(x, y + line_height * 2, 180, line_height, s_next)
change_color(normal_color)
draw_text(x, y + line_height * 1, 180, line_height, s1, 2)
draw_text(x, y + line_height * 3, 180, line_height, s2, 2)
end
#--------------------------------------------------------------------------
# ● 能力値の描画
#--------------------------------------------------------------------------
def draw_actor_param(actor, x, y, param_id, width = 124)
if param_id < 0 || param_id > 7
raise ArgumentError, "能力値の ID は 0 から 7 までの数値です。"
end
if VISIBLE_SYSTEM
change_color(system_color)
draw_text(x, y, width, line_height, Vocab::param(param_id))
end
change_color(normal_color)
draw_text(x, y, width, line_height, actor.param(param_id), 2)
end
#--------------------------------------------------------------------------
# ● 矩形の描画
#--------------------------------------------------------------------------
def draw_actor_rect(actor, x, y, w, h, color, script = nil)
return if script && !eval(script)
draw_fill_rect(x, y, w, h, str2color(color))
end
#--------------------------------------------------------------------------
# ● アイテム名の描画
#--------------------------------------------------------------------------
def draw_item_name(item, x, y, width = 172, enabled = true)
return unless item
draw_icon(item.icon_index, x, y, enabled)
change_color(normal_color, enabled)
draw_text(x + 24, y, width, line_height, item.name)
end
#--------------------------------------------------------------------------
# ● 通貨単位つき数値（所持金など）の描画
#--------------------------------------------------------------------------
def draw_currency_value(value, name, unit, x, y, width)
cx = text_size(unit).width
change_color(normal_color)
draw_text(x, y, width - cx - 2, line_height, value, 2)
if VISIBLE_SYSTEM
change_color(system_color)
draw_text(x, y, width, line_height, name)
draw_text(x, y, width, line_height, unit, 2)
end
end
#--------------------------------------------------------------------------
# ● 通貨単位つき数値（所持金など）の描画
#--------------------------------------------------------------------------
def draw_gold(x, y, width)
draw_currency_value(
$game_party.gold, VOCABS[:gold], Vocab::currency_unit, x, y, width)
end
end

复制代码

请问这要怎么解决？感谢。

yaminolancelot · 发表于 2021-8-12 22:51:31

t0004980 发表于 2021-8-12 22:32
我还想请问一下，因为我有使用别的菜单脚本
所以会出现菜单主画面没变，但是状态却显示改变了。

我的脚本有放他下面吗，而且你这脚本少了几段好像

t0004980 · 发表于 2021-8-13 02:00:31

yaminolancelot 发表于 2021-8-12 22:51
我的脚本有放他下面吗，而且你这脚本少了几段好像

我有放在下面了，不然我直接工程给你看？
谢谢，不好意思麻烦了。
链接: https://pan.baidu.com/s/1ID09Z5eCy3iDVVs30mPaMw 提取码: ceyn

t0004980 · 发表于 2021-8-13 10:00:23

本帖最后由 t0004980 于 2021-8-13 10:15 编辑

yaminolancelot 发表于 2021-8-12 20:17

不好意思我又来了，如果我想把状态跟装备的能力值也隐藏起来的话，同时别的角色也不会遭到影响出错。要怎么做呢？
(我照着您的脚本试着重新编辑，但是切换到别的角色的时后会出错。)

def draw_actor_param(actor, x, y, param_id)
if YAMI_NEED2HIDE.include?(actor.actor.id)
draw_text(x, y, text_size(YAMI_REPLACE_TEXT).width * 2, line_height, YAMI_REPLACE_TEXT)
return
end
yami_draw_actor_param(actor, x, y, width)
end

复制代码

麻烦了谢谢。

yaminolancelot · 发表于 2021-8-13 19:49:25

t0004980 发表于 2021-8-13 10:00
不好意思我又来了，如果我想把状态跟装备的能力值也隐藏起来的话，同时别的角色也不会遭到影响出错。要怎 ...

你参数得对上啊

def draw_actor_param(*args)
if YAMI_NEED2HIDE.include?(args[0].actor.id)
draw_text(args[1], args[2], text_size(YAMI_REPLACE_TEXT).width * 2, line_height, YAMI_REPLACE_TEXT)
return
end
yami_draw_actor_param(*args)
end

复制代码

帐号		自动登录	找回密码
密码			注册会员

[已经解决] 关于隐藏单一角色数值

最佳答案

评分