夏娜完美输入法问题

九幽鬼少

夏娜到的完美输入法怎么创建域 怎么把输入的文字代入到角色名字啊！ 求教！求范例！
完美输入法:
=begin

  脚本：【完美输入法修正】
  
  功能：输入法。
  
  说明: 直接用Type_Field创建输入域即可进行输入，在此可根据Type_Field域对象
  
        的活动标记active来自定义刷新等，在Type_Field中需要自己处理特殊按键
        
        的处理方法。具体不明白之处请参考范例工程。

  作者：灼眼的夏娜
  
  补充: 至于以前那个版本也许很多人都注意到那个烦人的问题了吧，按Enter和Tab那
  
        些会出现不爽的声音，这个版本解决了那个问题，并简化添加了Type_Field类
        
        来方便创建输入域。

=end

#==============================================================================
# ■ RInput
#------------------------------------------------------------------------------
# 　全键盘处理的模块。
#==============================================================================
module RInput
  
  #--------------------------------------------------------------------------
  # ● 常量定义
  #--------------------------------------------------------------------------
  ENTER             = 0x0D
  SPACE             = 0x20
  UP                = 0x26
  DOWN              = 0x28
  LEFT              = 0x25
  RIGHT             = 0x27
  
  LCTRL             = 0xA2
  LALT              = 0xA4

  #--------------------------------------------------------------------------
  # ● 临时Hash
  #--------------------------------------------------------------------------
  @R_Key_Hash = {}
  @R_Key_Repeat = {}
  
  #--------------------------------------------------------------------------
  # ● 唯一API
  #--------------------------------------------------------------------------
  GetKeyState = Win32API.new("user32","GetAsyncKeyState",['I'],'I')

  #--------------------------------------------------------------------------
  # ● 单键处理
  #--------------------------------------------------------------------------
  def self.trigger?(rkey)
    result = GetKeyState.call(rkey)
    if @R_Key_Hash[rkey] == 1 and result != 0
      return false
    end
    if result != 0
      @R_Key_Hash[rkey] = 1
      return true
    else
      @R_Key_Hash[rkey] = 0
      return false
    end
  end

end

#==============================================================================
# ■ EasyConv
#------------------------------------------------------------------------------
# 　转码模块。
#==============================================================================
module EasyConv

  #--------------------------------------------------------------------------
  # ● 常量定义
  #--------------------------------------------------------------------------
  CP_ACP = 0
  CP_UTF8 = 65001

  #--------------------------------------------------------------------------
  # ● 模块函数
  #--------------------------------------------------------------------------
  module_function
  
  #--------------------------------------------------------------------------
  # ● 转码
  #--------------------------------------------------------------------------
  def s2u(text)

    m2w = Win32API.new('kernel32', 'MultiByteToWideChar', 'ilpipi', 'i')
    w2m = Win32API.new('kernel32', 'WideCharToMultiByte', 'ilpipipp', 'i')

    len = m2w.call(CP_ACP, 0, text, -1, nil, 0)
    buf = "\0" * (len*2)
    m2w.call(CP_ACP, 0, text, -1, buf, buf.size/2)

    len = w2m.call(CP_UTF8, 0, buf, -1, nil, 0, nil, nil)
    ret = "\0" * len
    w2m.call(CP_UTF8, 0, buf, -1, ret, ret.size, nil, nil)
    ret[-1] = ""
   
    return ret
  end

  #--------------------------------------------------------------------------
  # ● 转码
  #--------------------------------------------------------------------------
  def u2s(text)
   
    m2w = Win32API.new('kernel32', 'MultiByteToWideChar', 'ilpipi', 'i')
    w2m = Win32API.new('kernel32', 'WideCharToMultiByte', 'ilpipipp', 'i')

    len = m2w.call(CP_UTF8, 0, text, -1, nil, 0)
    buf = "\0" * (len*2)
    m2w.call(CP_UTF8, 0, text, -1, buf, buf.size/2)

    len = w2m.call(CP_ACP, 0, buf, -1, nil, 0, nil, nil)
    ret = "\0" * len
    w2m.call(CP_ACP, 0, buf, -1, ret, ret.size, nil, nil)
   
    return ret
  end

end

#==============================================================================
# ■ TypeAPI
#------------------------------------------------------------------------------
# 　输入法相关API模块。
#==============================================================================
module TypeAPI
  
  #--------------------------------------------------------------------------
  # ● API定义
  #--------------------------------------------------------------------------
  GPPS         = Win32API.new("kernel32","GetPrivateProfileString",'pppplp','l')
  FindWindow   = Win32API.new("user32", "FindWindow", 'pp', 'i')
  CreateWindow = Win32API.new("NetGame","CreatWnd",'l','l')
  SetHK        = Win32API.new("NetGame","SetHK",'v','v')
  GetText      = Win32API.new("NetGame","GetWndText",'l','p')
  SetFocus     = Win32API.new("user32","SetFocus",'l','l')
  IfBack       = Win32API.new("NetGame","If_Back",'v','i')
  StartType    = Win32API.new("NetGame","StartType",'v','v')
  EndType      = Win32API.new("NetGame","EndType",'v','v')
  GetKeyInfos  = Win32API.new("NetGame","GetKeyInfo",'v','i')
  
  #--------------------------------------------------------------------------
  # ● 模块函数
  #--------------------------------------------------------------------------
  module_function
  
  #--------------------------------------------------------------------------
  # ● 获取参数
  #--------------------------------------------------------------------------
  def getParam
    val = "\0" * 256
    GPPS.call("Game","Title","",val,256,"./Game.ini")
    val.delete!("\0")
    return val
  end
  
  #--------------------------------------------------------------------------
  # ● 获取窗口
  #--------------------------------------------------------------------------
  def findWindow
    return FindWindow.call("RGSS Player",self.getParam)
  end
  
  #--------------------------------------------------------------------------
  # ● 创建窗口
  #--------------------------------------------------------------------------
  def createWindow(hwnd)
    return CreateWindow.call(hwnd)
  end
  
  #--------------------------------------------------------------------------
  # ● 设置HK
  #--------------------------------------------------------------------------
  def setHK
    SetHK.call
  end
  
  #--------------------------------------------------------------------------
  # ● 获取文字
  #--------------------------------------------------------------------------
  def getText
    return EasyConv.s2u(GetText.call(@subhwnd))
  end
  
  #--------------------------------------------------------------------------
  # ● 设置焦点
  #--------------------------------------------------------------------------
  def setFocus
    SetFocus.call(@subhwnd)
  end
  
  #--------------------------------------------------------------------------
  # ● 转换焦点
  #--------------------------------------------------------------------------
  def lostFocus
    SetFocus.call(@hwnd)
  end
  
  #--------------------------------------------------------------------------
  # ● 退格判定
  #--------------------------------------------------------------------------
  def ifBack
    return IfBack.call
  end
  
  #--------------------------------------------------------------------------
  # ● 开始输入
  #--------------------------------------------------------------------------
  def startType
    StartType.call
  end
  
  #--------------------------------------------------------------------------
  # ● 结束输入
  #--------------------------------------------------------------------------
  def endType
    EndType.call
  end
  
  #--------------------------------------------------------------------------
  # ● 输入中特殊按键处理
  #--------------------------------------------------------------------------
  def getKeyInfos
    return GetKeyInfos.call
  end
  
  #--------------------------------------------------------------------------
  # ● 获取句柄
  #--------------------------------------------------------------------------
  @hwnd    = self.findWindow
  
  @subhwnd = self.createWindow(@hwnd)

  #--------------------------------------------------------------------------
  # ● 设置HK应用
  #--------------------------------------------------------------------------
  self.setHK
  
end

#==============================================================================
# ■ Type_Field
#------------------------------------------------------------------------------
# 　处理输入域的类。
#==============================================================================
class Type_Field
  # 属性设置  ###
  BGC_COLOR = Color.new(255, 255, 255, 255)   # 输入框底色
  SBGC_COLOR = Color.new(0, 50, 200, 255)     # 选中文字时的底色
  MOUSE_FRAME = 10                            # 鼠标双击最大间隔帧数
  
  ###
  attr_reader :visible
  #--------------------------------------------------------------------------
  # ● 定义实例变量
  #--------------------------------------------------------------------------
  attr(:active)
  #--------------------------------------------------------------------------
  # ● 初始化
  #--------------------------------------------------------------------------
  def initialize(rect,default_text = "",default_careth = nil,default_fonts = 32,\
    default_fontc = Color.new(0,0,0))
    # active
    @active = false
    @visible = true
    # 视口
    #rect = v.rect
    @v = Viewport.new(rect)
    @w = rect.width
    @h = rect.height
    @v.z = 300    ###
    # 属性
    @caret_h = default_careth.nil? ? @h : [@h,default_careth].min
    @caret_y = rect.y + (@h - @caret_h) / 2
    @font_size = [default_fonts,@h].min
    # 描绘底色  ###
    @bgc = Sprite.new(@v)
    @bgc.bitmap = Bitmap.new(rect.width, rect.height)
    @bgc.bitmap.fill_rect(0, 0, rect.width, rect.height, BGC_COLOR)
    @bgc.z = 1
    # 描绘文字选中时的底色  ###
    @sbgc = Sprite.new(@v)
    @sbgc.bitmap = Bitmap.new(rect.width, rect.height)
    y = rect.height / 20
    height = rect.height * 0.9
    @sbgc.bitmap.fill_rect(0, y, 1, height, SBGC_COLOR)
    @sbgc.z = 5
    @sbgc.visible = false
    # 描绘contents
    @cts = Sprite.new(@v)
    @cts.bitmap = Bitmap.new(@w - 3,@h)
    @cts.bitmap.font.size = @font_size
    @cts.bitmap.font.color = default_fontc
    @cts.z = 10 ###
    # 辅助属性  
    @mouse_frame = 0              ### 鼠标双击间隔帧数
    @bk_count = 0
    @text = default_text.scan(/./)
    @max_width = @w - 3
    @caret_pos = @text.size
    @save_pos = @caret_pos
    # 光标Caret
    @v1 = Viewport.new(rect.x,@caret_y,@w + 3,@caret_h)
    @v1.z = 300   ###
    @caret_sp = Sprite.new(@v1)
    @caret_bitmap = Bitmap.new(3,@caret_h)
    @caret_bitmap.fill_rect(0,0,1,@caret_h,Color.new(0,0,0,180))
    @caret_bitmap.fill_rect(1,0,1,@caret_h,Color.new(0,0,0))
    @caret_bitmap.fill_rect(2,0,1,@caret_h,Color.new(120,120,120))
    @caret_sp.bitmap = @caret_bitmap
    @caret_sp.x = self.get_width(@text[0,@caret_pos].to_s)
    @caret_sp.y = 0
    @caret_sp.visible = false
    @caret_flash_count = 0
    @caret_pos_o = @caret_pos     ### 选中文字时的起始位
    @caret_pos_ox = @caret_sp.x   ### 选中文字时起始位的x坐标
    @text_caret = [@caret_pos, 0] ### 选中文字的首位及长度
    # 刷新
    refresh
    # 设置焦点
    TypeAPI.setFocus
    # 开始输入
    TypeAPI.startType
  end
  
  ########################################
  # 设置可见标记
  ##########################################
  def visible=(value)
    if value != true and value != false
      return
    end
    @visible = value
    @v.visible = @visible
    @v1.visible = @visible
  end
  ##########################################
  # 数字限定
  ##########################################
  def number?(text)
    return ["1","2","3","4","5","6","7","8","9","0","-"].include?(text)
  end
  #########################################
  # 鼠标左键确定光标位置
  ##########################################
  def set_mouse_caret
      rect = @v.rect
      return unless Mouse.in_rect?(rect.x, rect.y, rect.width, rect.height)
      mouse_x, mouse_y = Mouse.get_mouse_pos
      @caret_pos = @text.size
      update_caret
      loop do
        if mouse_x - rect.x + 5 > @caret_sp.x || @caret_pos < 1
          return
        else
          @caret_pos -= 1
          update_caret
        end
      end
  end
  ########################