求大神帮我看看我的两个脚本哪里出现问题了

冰枫o鲍辰 · 发表于 2015-1-12 23:40:52

加入我们，或者，欢迎回来。

您需要登录才可以下载或查看，没有帐号？注册会员

x

一个是横版战斗另一个是即时消息虽然放在一起能用但是战斗的时候即时消息的信息框不见了……（在原工程是会出现的QAQ）新人刚进坑几个月，希望大神能帮我看看二楼上脚本……

冰枫o鲍辰 · 发表于 2015-1-12 23:44:16

#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#
# ■ 熊式横版战斗 by 弗雷德真移位：神思
#==============================================================================
#如果要需要Game_Battler3类的攻击、特技、物品的方法，请移至161-470行
#因为重写过这三个方法，在原方法里改是不会生效的。
#--------------------------------------------------------------------------
# ● 设定开始
#--------------------------------------------------------------------------
#伤害为0的时候是否显示无效文字，1为显示，0为不显示。
INVALIDSWITCH = 0
# 是否显示死亡图 1为显示，0为不显示。
DEADPIC = 1
# 是否显示总伤害 1为显示，0为不显示。
SHOW_TOTAL_DAMAGE = 0
# 是否显示连击数值 1为显示，0为不显示。
HITSWITCH = 1
# 是否显示SP伤害数值 1为显示，0为不显示。
SDMGSWITCH = 1
# 不是主状态的时候是否稍稍降低点透明度 1为降低，0为不降低
NACTSWITCH = 0
# 会心一击时的音效,不设置为不使用音效。
CRIVOICE = "Critital_hit"
# 会心一击是否开启画面晃动 1为开启，0为关闭
CRISHAKE = 1
# 会心一击是否开启画面闪烁，1为开启，0为关闭
CRIFLASH = 1
# 攻击时不移动的属性编号默认为29号参考数据库的设置
# 比如职业枪兵勾上了29号属性，那么当枪兵使用普通攻击时将不会移动。技能也是如此。
UNMOVE = 29
# 攻击到与敌人同一水平线前的属性编号默认为30号参考数据库的设置
HOMOVE = 30
##################################################################
module Scene_BattleName
# 设定移动速度
Move_Duration = 28
#设定人物的单帧图，如果不做设定，将直接使用默认的战斗图。
BattlerName = {
"熊大王" => {
"待机" => ["bear_s1","bear_s2","bear_s3","bear_s4"],
"移动" => ["bear_r1","bear_r2","bear_r3","bear_r4"],
"返回" => ["bear_b1","bear_b2","bear_b3","bear_b4"],
"受伤" => ["bear_h"],
"防御" => ["bear_d"],
"死亡" => ["bear_die1","bear_die2"]
},
"弗雷德" => {
"待机" => ["Fred_s1","Fred_s2","Fred_s3","Fred_s4"],
"移动" => ["Fred_r1","Fred_r2","Fred_r3","Fred_r4"],
"返回" => ["Fred_b1","Fred_b2","Fred_b3","Fred_b4"],
"受伤" => ["Fred_h"],
"防御" => ["Fred_d"],
"死亡" => ["Fred_die1","Fred_die2"]
},
}
end
#至于其它的：
#HP伤害数字间距偏移在602行修改。
#SP伤害数字间距偏移在667行修改。
#连击数字间距偏移在713行修改。
#总伤害数字间距偏移在759行修改。
#--------------------------------------------------------------------------
# ● 设定结束
#--------------------------------------------------------------------------
class Game_Battler
attr_accessor :movex # X坐标修正
attr_accessor :movey # Y坐标修正
attr_accessor :startactive # 行为
attr_accessor :damage_sp # 精神伤害值
alias bearrpg_initialize initialize
def initialize
bearrpg_initialize
@damage_sp = 0
@movex = 0
@movey = 0
@startactive = "待机"
end
def width #获取战斗图宽
return RPG::Cache.battler(@battler_name, @battler_hue).width
end
def height #获取战斗图高
return RPG::Cache.battler(@battler_name, @battler_hue).height
end
#--------------------------------------------------------------------------
# ● 应用通常攻击效果
# attacker : 攻击者 (battler)
#--------------------------------------------------------------------------
def attack_effect(attacker)
# 清除会心一击标志
self.critical = false
#######伤害开关初始化##################################################bearrpg
$damage_hp = false
$damage_sp = false
# 第一命中判定
hit_result = (rand(100) < attacker.hit)
# 命中的情况下
if hit_result == true
# 计算基本伤害
atk = [attacker.atk - self.pdef / 2, 0].max
self.damage = atk * (20 + attacker.str) / 20
# 属性修正
self.damage *= elements_correct(attacker.element_set)
self.damage /= 100
# 伤害符号正确的情况下
if self.damage > 0
# 会心一击修正
if rand(100) < 4 * attacker.dex / self.agi
self.damage *= 2
self.critical = true
end
# 防御修正
if self.guarding?
self.damage /= 2
end
end
$damage_hp = true if self.damage.is_a?(Numeric)
# $damage_sp = true if self.damage_sp != 0 SP伤害数值开关
# 分散
if self.damage.abs > 0
amp = [self.damage.abs * 15 / 100, 1].max
self.damage += rand(amp+1) + rand(amp+1) - amp
end
# 第二命中判定
eva = 8 * self.agi / attacker.dex + self.eva
hit = self.damage < 0 ? 100 : 100 - eva
hit = self.cant_evade? ? 100 : hit
hit_result = (rand(100) < hit)
end
#####################################bearrpg
# 命中的情况下
if hit_result == true
# 状态冲击解除
remove_states_shock
# HP 的伤害计算
self.hp -= self.damage
# 状态变化
@state_changed = false
states_plus(attacker.plus_state_set)
states_minus(attacker.minus_state_set)
if self.damage == 0
self.damage = "无效" if INVALIDSWITCH >0
self.critical = false
end
# Miss 的情况下
else
# 伤害设置为 "Miss"
self.damage = "Miss"
# 清除会心一击标志
self.critical = false
end
# 过程结束
return true
end
#############################################bearrpg
#--------------------------------------------------------------------------
# ● 应用特技效果
# user : 特技的使用者 (battler)
# skill : 特技
#--------------------------------------------------------------------------
def skill_effect(user, skill)
#######伤害开关初始化##################################################bearrpg
$damage_hp = false
$damage_sp = false
# 清除会心一击标志
self.critical = false
# 特技的效果范围是 HP 1 以上的己方、自己的 HP 为 0、
# 或者特技的效果范围是 HP 0 的己方、自己的 HP 为 1 以上的情况下
if ((skill.scope == 3 or skill.scope == 4) and self.hp == 0) or
((skill.scope == 5 or skill.scope == 6) and self.hp >= 1)
# 过程结束
return false
end
# 清除有效标志
effective = false
# 公共事件 ID 是有效的情况下,设置为有效标志
effective |= skill.common_event_id > 0
# 第一命中判定
hit = skill.hit
if skill.atk_f > 0
hit *= user.hit / 100
end
hit_result = (rand(100) < hit)
# 不确定的特技的情况下设置为有效标志
effective |= hit < 100
# 命中的情况下
if hit_result == true
# 计算威力
power = skill.power + user.atk * skill.atk_f / 100
if power > 0
power -= self.pdef * skill.pdef_f / 200
power -= self.mdef * skill.mdef_f / 200
power = [power, 0].max
end
# 计算倍率
rate = 20
rate += (user.str * skill.str_f / 100)
rate += (user.dex * skill.dex_f / 100)
rate += (user.agi * skill.agi_f / 100)
rate += (user.int * skill.int_f / 100)
# 计算基本伤害
self.damage = power * rate / 20
# 属性修正
self.damage *= elements_correct(skill.element_set)
self.damage /= 100
# 伤害符号正确的情况下
if self.damage > 0
# 防御修正
if self.guarding?
self.damage /= 2
end
end
# 分散
if skill.variance > 0 and self.damage.abs > 0
amp = [self.damage.abs * skill.variance / 100, 1].max
self.damage += rand(amp+1) + rand(amp+1) - amp
end
# 第二命中判定
eva = 8 * self.agi / user.dex + self.eva
hit = self.damage < 0 ? 100 : 100 - eva * skill.eva_f / 100
hit = self.cant_evade? ? 100 : hit
hit_result = (rand(100) < hit)
# 不确定的特技的情况下设置为有效标志
effective |= hit < 100
end
$damage_hp = true if self.damage.is_a?(Numeric)
# $damage_sp = true if self.damage_sp != 0 SP伤害数值开关
# 命中的情况下
if hit_result == true
# 威力 0 以外的物理攻击的情况下
if skill.power != 0 and skill.atk_f > 0
# 状态冲击解除
remove_states_shock
# 设置有效标志
effective = true
end
# HP 的伤害减法运算
last_hp = self.hp
self.hp -= self.damage
effective |= self.hp != last_hp
# 状态变化
@state_changed = false
effective |= states_plus(skill.plus_state_set)
effective |= states_minus(skill.minus_state_set)
#############################################bearrpg
# 威力为 0 的场合
if skill.power == 0
# 伤害设置为空的字串
self.damage = ""
# 状态没有变化的情况下
unless @state_changed
# 伤害设置为 "Miss"
self.damage = "Miss"
end
elsif self.damage == 0
unless @state_changed
self.damage = "无效" if INVALIDSWITCH >0
else
self.damage = ""
end
end
# Miss 的情况下
else
# 伤害设置为 "Miss"
self.damage = "Miss"
end
# 不在战斗中的情况下
unless $game_temp.in_battle
# 伤害设置为 nil
self.damage = nil
end
# 过程结束
return effective
end
#############################################bearrpg
#--------------------------------------------------------------------------
# ● 应用物品效果
# item : 物品
#--------------------------------------------------------------------------
def item_effect(item)
# 清除会心一击标志
self.critical = false
# 物品的效果范围是 HP 1 以上的己方、自己的 HP 为 0、
# 或者物品的效果范围是 HP 0 的己方、自己的 HP 为 1 以上的情况下
if ((item.scope == 3 or item.scope == 4) and self.hp == 0) or
((item.scope == 5 or item.scope == 6) and self.hp >= 1)
# 过程结束
return false
end
# 清除有效标志
effective = false
# 公共事件 ID 是有效的情况下,设置为有效标志
effective |= item.common_event_id > 0
# 命中判定
hit_result = (rand(100) < item.hit)
# 不确定的特技的情况下设置为有效标志
effective |= item.hit < 100
# 命中的情况
if hit_result == true
# 计算回复量
recover_hp = maxhp * item.recover_hp_rate / 100 + item.recover_hp
recover_sp = maxsp * item.recover_sp_rate / 100 + item.recover_sp
if recover_hp < 0
recover_hp += self.pdef * item.pdef_f / 20
recover_hp += self.mdef * item.mdef_f / 20
recover_hp = [recover_hp, 0].min
end
# 属性修正
recover_hp *= elements_correct(item.element_set)
recover_hp /= 100
recover_sp *= elements_correct(item.element_set)
recover_sp /= 100
# 分散
if item.variance > 0 and recover_hp.abs > 0
amp = [recover_hp.abs * item.variance / 100, 1].max
recover_hp += rand(amp+1) + rand(amp+1) - amp
end
if item.variance > 0 and recover_sp.abs > 0
amp = [recover_sp.abs * item.variance / 100, 1].max
recover_sp += rand(amp+1) + rand(amp+1) - amp
end
# 回复量符号为负的情况下
if recover_hp < 0
# 防御修正
if self.guarding?
recover_hp /= 2
end
end
# HP 回复量符号的反转、设置伤害值
self.damage = -recover_hp
self.damage_sp = -recover_sp
# HP 以及 SP 的回复
last_hp = self.hp
last_sp = self.sp
self.hp += recover_hp
self.sp += recover_sp
###################################################################bearrpg
$damage_hp = true if self.damage.is_a?(Numeric)
$damage_sp = true if self.damage_sp.is_a?(Numeric) and recover_sp != 0
###################################################################bearrpg
effective |= self.hp != last_hp
effective |= self.sp != last_sp
# 状态变化
@state_changed = false
effective |= states_plus(item.plus_state_set)
effective |= states_minus(item.minus_state_set)
# 能力上升值有效的情况下
if item.parameter_type > 0 and item.parameter_points != 0
# 能力值的分支
case item.parameter_type
when 1 # MaxHP
@maxhp_plus += item.parameter_points
when 2 # MaxSP
@maxsp_plus += item.parameter_points
when 3 # 力量
@str_plus += item.parameter_points
when 4 # 灵巧
@dex_plus += item.parameter_points
when 5 # 速度
@agi_plus += item.parameter_points
when 6 # 魔力
@int_plus += item.parameter_points
end
# 设置有效标志
effective = true
end
# HP 回复率与回复量为 0 的情况下
if item.recover_hp_rate == 0 and item.recover_hp == 0
# 设置伤害为空的字符串
self.damage = ""
# SP 回复率与回复量为 0、能力上升值无效的情况下
if item.recover_sp_rate == 0 and item.recover_sp == 0 and
(item.parameter_type == 0 or item.parameter_points == 0)
# 状态没有变化的情况下
unless @state_changed
# 伤害设置为 "Miss"
self.damage = "Miss"
end
end
end
# Miss 的情况下
else
# 伤害设置为 "Miss"
self.damage = "Miss"
end
# 不在战斗中的情况下
unless $game_temp.in_battle
# 伤害设置为 nil
self.damage = nil
end
# 过程结束
return effective
end
end
class Game_Actor
def screen_x
if self.index != nil
return (640-self.index*50)/2 + 240 + @movex
else
return 0
end
end
def screen_y
return self.index*70+self.height/2 + 140 + @movey #(320-self.index*91+self.height)/2 + 100 + @movey
end
def screen_z
return self.screen_y-self.index * 10
end
end
class Game_Enemy
def screen_x
return $data_troops[@troop_id].members[@member_index].x + @movex
end
def screen_y
return $data_troops[@troop_id].members[@member_index].y + @movey
end
def screen_z
return self.screen_y#+self.height
end
end
class Sprite_Battler
include Scene_BattleName
end
module RPG
class Sprite < ::Sprite
#==========================================
def initialize(viewport = nil)
super(viewport)
@_whiten_duration = 0
@_appear_duration = 0
@_escape_duration = 0
@_collapse_duration = 0
@_damage_duration = 0
@_animation_duration = 0
@_blink = false
@flash_shake = 0
@_damage = []
@_damage_sp = []
@_total_damage = 0
@_total_damage_duration = 0
@p_dam=0
@hits=0
end
def animation_set_sprites(sprites, cell_data, position)
for i in 0..15
sprite = sprites[i]
pattern = cell_data[i, 0]
if sprite == nil or pattern == nil or pattern == -1
sprite.visible = false if sprite != nil
next
end
sprite.visible = true
sprite.src_rect.set(pattern % 5 * 192, pattern / 5 * 192, 192, 192)
if position == 3
if self.viewport != nil
sprite.x = self.viewport.rect.width / 2
sprite.y = self.viewport.rect.height - 160
else
sprite.x = 320
sprite.y = 240
end
else
sprite.x = self.x - self.ox + self.src_rect.width / 2
sprite.y = self.y - self.oy + self.src_rect.height / 2
sprite.y -= self.src_rect.height / 4 if position == 0
sprite.y += self.src_rect.height / 4 if position == 2
end
sprite.x += cell_data[i, 1]
sprite.y += cell_data[i, 2]
if $scene.is_a?(Scene_Battle)
sprite.z = battler.screen_z+20
else
sprite.z = 9990
end
sprite.ox = 96
sprite.oy = 96
sprite.zoom_x = cell_data[i, 3] / 100.0
sprite.zoom_y = cell_data[i, 3] / 100.0
sprite.angle = cell_data[i, 4]
sprite.mirror = (cell_data[i, 5] == 1)
sprite.opacity = cell_data[i, 6] * self.opacity / 255.0
sprite.blend_type = cell_data[i, 7]
end
end
def damage(value, critical)
dispose_hit
if value.is_a?(Numeric)
damage_string = value.abs.to_s
else
damage_string = value.to_s
end
bitmap = Bitmap.new(300, 150)
bitmap.font.name = ["黑体","华文行楷", "宋体"]
bitmap.font.size = 32
if value.is_a?(Numeric)
# 分割伤害值字符串
damage_array = damage_string.scan(/./)
damage_x = 81 - damage_string.size * 9
# 会心一击标志打开的情况
if critical and value != "无效"
# 显示会心一击图画
cri_bitmap = RPG::Cache.picture("Critital")
bitmap.blt(damage_x+cri_bitmap.width, cri_bitmap.height*2, cri_bitmap, Rect.new(0, 0, cri_bitmap.width, cri_bitmap.height))
Audio.se_play("Audio/SE/"+CRIVOICE,100,100) if CRIVOICE != nil and CRIVOICE != ""
$game_screen.start_flash(Color.new(255, 5, 5, 155), 5) if CRIFLASH >0
$game_screen.start_shake(2,9,3) if CRISHAKE >0
end
# 伤害值为负的情况下
dmg_bitmap = RPG::Cache.picture("Normal_Damage")
if value < 0
# 调用回复数字表
bitmap.blt(damage_x-14, 32,dmg_bitmap,Rect.new(dmg_bitmap.width/12*10, 0, dmg_bitmap.width/12, dmg_bitmap.height/2))
else
# 调用伤害数字表
bitmap.blt(damage_x-14, 32, dmg_bitmap,Rect.new(dmg_bitmap.width/12*11, 0, dmg_bitmap.width/12, dmg_bitmap.height/2))
end
# 循环伤害值字符串
for char in damage_array
number = char.to_i
# 显示伤害数字
bitmap.blt(damage_x, 32, dmg_bitmap,
Rect.new(number * dmg_bitmap.width/12, 0, dmg_bitmap.width/12, dmg_bitmap.height/2))
#################################################################普通伤害数值
damage_x += dmg_bitmap.width/12 - 4#间距缩小4个像素，可以自行调整
#################################################################普通伤害数值
end
else
if value == "Miss"
miss_dmg = RPG::Cache.picture("miss")
bitmap.blt(miss_dmg.width, 0,miss_dmg, Rect.new(0, 0, miss_dmg.width, miss_dmg.height))
elsif value == "无效"
invalid_dmg = RPG::Cache.picture("invalid")
bitmap.blt(invalid_dmg.width, 0,invalid_dmg, Rect.new(0, 0, invalid_dmg.width,invalid_dmg.height))
#end
end
end
# 伤害值定位
@_damage_sprite = ::Sprite.new(self.viewport)
@_damage_sprite.bitmap = bitmap
@_damage_sprite.ox = 80
@_damage_sprite.oy = 20
@_damage_sprite.x = self.x
@_damage_sprite.y = self.y - self.oy / 2
@_damage_sprite.z = 3000
@_damage_duration = 40
@_damage.push([@_damage_sprite,@_damage_duration-10,0, rand(30) - 15, rand(3)])
make_total_damage(value)
end
##################################################################sp伤害数值
def damage_sp(value, critical)
dispose_hit
if value.is_a?(Numeric)
damage_string = value.abs.to_s
else
damage_string = value.to_s
end
bitmap = Bitmap.new(300, 150)
bitmap.font.name = ["黑体","华文行楷", "宋体"]
bitmap.font.size = 32
if value.is_a?(Numeric)
# 分割伤害值字符串
damage_array = damage_string.scan(/./)
damage_x = 81 - damage_string.size * 9
# 会心一击标志打开的情况
if critical and value != "无效"
# 显示会心一击图画
cri_bitmap = RPG::Cache.picture("Critital")
bitmap.blt(damage_x+cri_bitmap.width, cri_bitmap.height*2, cri_bitmap, Rect.new(0, 0, cri_bitmap.width, cri_bitmap.height))
Audio.se_play("Audio/SE/"+CRIVOICE,100,100) if CRIVOICE != nil and CRIVOICE != ""
$game_screen.start_flash(Color.new(255, 5, 5, 155), 5) if CRIFLASH >0
$game_screen.start_shake(2,9,3) if CRISHAKE >0
end
# 伤害值为负的情况下
dmg_bitmap = RPG::Cache.picture("Normal_Damage")
if value < 0
# 调用回复数字表
bitmap.blt(damage_x-14, 32,dmg_bitmap,Rect.new(dmg_bitmap.width/12*10, dmg_bitmap.height/2, dmg_bitmap.width/12, dmg_bitmap.height/2))
else
# 调用伤害数字表
bitmap.blt(damage_x-14, 32, dmg_bitmap,Rect.new(dmg_bitmap.width/12*11, dmg_bitmap.height/2, dmg_bitmap.width/12, dmg_bitmap.height/2))
end
# 循环伤害值字符串
for char in damage_array
number = char.to_i
# 显示伤害数字
bitmap.blt(damage_x, 32, dmg_bitmap,
Rect.new(number * dmg_bitmap.width/12, dmg_bitmap.height/2, dmg_bitmap.width/12, dmg_bitmap.height/2))
#################################################################普通伤害数值
damage_x += dmg_bitmap.width/12 - 4#间距缩小4个像素，可以自行调整
#################################################################普通伤害数值
end
else
if value == "Miss"
miss_dmg = RPG::Cache.picture("miss")
bitmap.blt(miss_dmg.width, 0,miss_dmg, Rect.new(0, 0, miss_dmg.width, miss_dmg.height))
elsif value == "无效"
invalid_dmg = RPG::Cache.picture("invalid")
bitmap.blt(invalid_dmg.width, 0,invalid_dmg, Rect.new(0, 0, invalid_dmg.width,invalid_dmg.height))
#end
end
end
# 伤害值定位
@_damage_sprite = ::Sprite.new(self.viewport)
@_damage_sprite.bitmap = bitmap
@_damage_sprite.ox = 80
@_damage_sprite.oy = 20
@_damage_sprite.x = self.x
@_damage_sprite.y = self.y - self.oy / 2
@_damage_sprite.z = 3000
@_damage_duration = 40
@_damage_sp.push([@_damage_sprite,@_damage_duration-10,0, rand(30) - 15, rand(3)])
# make_total_damage(value)
end
def hit
# 如果伤害值是数值
# 转为字符串
value=@hits
hits_string = value.to_s
# 初始化位图
bitmap = Bitmap.new(320, 64)
bitmap.font.name = "Arial Black"
bitmap.font.size = 32
# 分割伤害值字符串
hits_array = hits_string.scan(/./)
hits_x = 81 - hits_string.size * 18.1
rect_y = 0
# 循环伤害值字符串
for char in hits_array
number = char.to_i
# 显示伤害数字
combo_num = RPG::Cache.picture("combo_num")
bitmap.blt(hits_x, 0, combo_num,
Rect.new(number * combo_num.width/10, 0, combo_num.width/10, combo_num.height))
#################################################################连击数数值
hits_x += combo_num.width/10 - 3#间距缩小3个像素，可以自行调整
#################################################################连击数数值
end
combo_tx = RPG::Cache.picture("combo_text")
bitmap.blt(hits_x, 0,combo_tx ,
Rect.new(0, 0, combo_tx.width, combo_tx.height))
# 伤害值定位
@_hits_sprite = ::Sprite.new(self.viewport)
@_hits_sprite.bitmap = bitmap
@_hits_sprite.ox = 81
@_hits_sprite.oy = 20
@_hits_sprite.x = 500
@_hits_sprite.y = 100
@_hits_sprite.opacity = HITSWITCH > 0 ? 255 : 0
@_hits_sprite.z = 3000
@_hits_duration = 40
end
#--------------------------------------------------------------------------
# ● 总伤害处理
#--------------------------------------------------------------------------
def make_total_damage(value)
if value.is_a?(Numeric) and SHOW_TOTAL_DAMAGE > 0
@_total_damage += value
# 绝对值转为字符串
damage_string = @_total_damage.abs.to_s
else
return
end
# 初始化位图
bitmap = Bitmap.new(350, 150)
bitmap.font.name = "Arial Black"
bitmap.font.size = 32
# 伤害值是数值的情况下
if value.is_a?(Numeric)
# 分割伤害值字符串
damage_array = damage_string.scan(/./)
damage_x = 40 - damage_string.size * 9
# 伤害值为负的情况下
name=RPG::Cache.picture("total_damage")
# 循环伤害值字符串
for char in damage_array
number = char.to_i
# 显示伤害数字
bitmap.blt(damage_x, 0, name,
Rect.new(number * name.width/10, 0, name.width/10, name.height))
#################################################################总伤害数值
damage_x += name.width/10 - 5 #间距缩小3个像素，可以自行调整
#################################################################总伤害数值
end
end
if @_total_damage_sprite.nil?
@_total_damage_sprite = ::Sprite.new(self.viewport)
@_total_damage_sprite.ox = 80
@_total_damage_sprite.oy = 40
@_total_damage_sprite.z = 3000
end
@_total_damage_sprite.bitmap = bitmap
@_total_damage_sprite.zoom_x = 1.0
@_total_damage_sprite.zoom_y = 1.0
@_total_damage_sprite.x = self.x
@_total_damage_sprite.y = self.y - self.oy / 2
@_total_damage_sprite.z = 3001
@_total_damage_duration = 80
#hit数描绘
@hits+=1
if @_total_damage > 0
hit
end
end
def animation(animation, hit, battler_damage="", battler_damage_sp="",battler_critical=false)
dispose_animation
@battler_damage = battler_damage
@battler_damage_sp = battler_damage_sp
@battler_critical = battler_critical
@_animation = animation
return if @_animation == nil
@_animation_hit = hit
@_animation_duration = @_animation.frame_max
animation_name = @_animation.animation_name
animation_hue = @_animation.animation_hue
bitmap = RPG::Cache.animation(animation_name, animation_hue)
for timing in @_animation.timings
quanzhong = animation_process_timing(timing, @_animation_hit,true)
@all_quanzhong += quanzhong
@_last_frame = timing.frame if quanzhong != 0
end
if @@_reference_count.include?(bitmap)
@@_reference_count[bitmap] += 1
else
@@_reference_count[bitmap] = 1
end
if $scene.is_a?(Scene_Battle)
if $scene.animation1_id == @battler.animation_id
@battler_damage = ""
@battler_damage_sp = ""
end
end
@_animation_sprites = []
if @_animation.position != 3 or not @@_animations.include?(animation)
for i in 0..15
sprite = ::Sprite.new(self.viewport)
sprite.bitmap = bitmap
sprite.visible = false
@_animation_sprites.push(sprite)
end
unless @@_animations.include?(animation)
@@_animations.push(animation)
end
end
update_animation
end
def dispose_damage
for damage in @_damage.reverse
damage[0].bitmap.dispose
damage[0].dispose
@_damage.delete(damage)
end
for damage_sp in @_damage_sp.reverse
damage_sp[0].bitmap.dispose
damage_sp[0].dispose
@_damage_sp.delete(damage_sp)
end
@_total_damage = 0
@_last_frame = -1
if @_total_damage_sprite != nil
@_total_damage_duration = 0
@_total_damage_sprite.bitmap.dispose
@_total_damage_sprite.dispose
@_total_damage_sprite = nil
end
end
def dispose_hit
if @_hits_sprite != nil
@_hits_sprite.bitmap.dispose
@_hits_sprite.dispose
@_hits_sprite = nil
end
end
def dispose_animation
@battler_damage = nil
@battler_damage_sp = nil
@battler_critical = nil
@all_quanzhong = 1
@_total_damage = 0
@_last_frame = -1
if @_animation_sprites != nil
sprite = @_animation_sprites[0]
if sprite != nil
@@_reference_count[sprite.bitmap] -= 1
if @@_reference_count[sprite.bitmap] == 0
sprite.bitmap.dispose
end
end
for sprite in @_animation_sprites
sprite.dispose
end
@_animation_sprites = nil
@_animation = nil
end
end
def update
super
if @_whiten_duration > 0
@_whiten_duration -= 1
self.color.alpha = 128 - (16 - @_whiten_duration) * 10
end
if @_appear_duration > 0
@_appear_duration -= 1
self.opacity = (16 - @_appear_duration) * 16
end
if @_escape_duration > 0
@_escape_duration -= 1
self.opacity = 256 - (32 - @_escape_duration) * 10
end
if @_collapse_duration > 0
@_collapse_duration -= 1
self.opacity = 256 - (48 - @_collapse_duration) * 6
end
if @_damage_duration > 0
@_damage_duration -= 1
for damage in @_damage
damage[0].x = self.x + self.viewport.rect.x -
self.ox + self.src_rect.width / 2 +
(40 - damage[1]) * damage[3] / 10
damage[0].y -= damage[4]+damage[1]/10
damage[0].opacity = damage[1]*20
damage[1] -= 1
if damage[1]==0
damage[0].bitmap.dispose
damage[0].dispose
@_damage.delete(damage)
next
end
end
for damage_sp in @_damage_sp
damage_sp[0].x = self.x + self.viewport.rect.x -
self.ox + self.src_rect.width / 2 +
(40 - damage_sp[1]) * damage_sp[3] / 10
damage_sp[0].y -= damage_sp[4]+damage_sp[1]/10
damage_sp[0].opacity = damage_sp[1]*20
damage_sp[1] -= 1
if damage_sp[1]==0
damage_sp[0].bitmap.dispose
damage_sp[0].dispose
@_damage_sp.delete(damage_sp)
next
end
end
end
if @_total_damage_duration > 0
@_total_damage_duration -= 1
@_total_damage_sprite.y -= 1 if @_total_damage_duration % 2 == 0
if @_total_damage_sprite.zoom_x > 1.0
@_total_damage_sprite.zoom_x -= 0.05
end
if @_total_damage_sprite.zoom_y > 1.0
@_total_damage_sprite.zoom_y -= 0.05
end
@_total_damage_sprite.opacity = 256 - (24 - @_total_damage_duration) * 16
if @_total_damage_duration <= 0
dispose_hit
@_total_damage = 0
@_total_damage_duration = 0
@_total_damage_sprite.bitmap.dispose
@_total_damage_sprite.dispose
@_total_damage_sprite = nil
end
end
#=======================================
if @_animation != nil and (Graphics.frame_count % 2 == 0)
@_animation_duration -= 1
update_animation
end
if @_loop_animation != nil and (Graphics.frame_count % 2 == 0)
update_loop_animation
@_loop_animation_index += 1
@_loop_animation_index %= @_loop_animation.frame_max
end
if @_blink
@_blink_count = (@_blink_count + 1) % 32
if @_blink_count < 16
alpha = (16 - @_blink_count) * 6
else
alpha = (@_blink_count - 16) * 6
end
self.color.set(255, 255, 255, alpha)
end
@@_animations.clear
end
def update_animation
if @_animation_duration > 0
frame_index = @_animation.frame_max - @_animation_duration
cell_data = @_animation.frames[frame_index].cell_data
position = @_animation.position
animation_set_sprites(@_animation_sprites, cell_data, position)
for timing in @_animation.timings
if timing.frame == frame_index
t = 1.0 * animation_process_timing(timing, @_animation_hit)
ts = 1.0 * animation_process_timing(timing, @_animation_hit)
if timing.se.name != ""
se=timing.se
Audio.se_play("Audio/SE/" + se.name, se.volume, se.pitch)
end
if @battler_damage.is_a?(Numeric) and t != 0
if @battler.guarding?
@battler.startactive = "防御" if @battler_damage > 0
else
@battler.startactive = "受伤" if @battler_damage > 0
end
t *= @battler_damage
t /= @all_quanzhong
ts *= @battler_damage_sp
ts /= @all_quanzhong
t = t.to_i
ts = ts.to_i
if frame_index != @_last_frame
@p_dam+= t
end
if frame_index == @_last_frame
t=@battler_damage-@p_dam
end
if frame_index == @_last_frame
@_total_damage = @battler_damage - t
@p_dam=0
end
damage(t,@battler_critical) if $damage_hp == true
damage_sp(ts,@battler_critical) if $damage_sp == true
if frame_index == @_last_frame
@hits=0
end
elsif !@battler_damage.is_a?(Numeric) and timing.flash_scope != 0
damage(@battler_damage,@battler_critical)
damage_sp(@battler_damage_sp,@battler_critical) if $damage_sp == true
end
end
end
else
dispose_animation
end
end
def animation_process_timing(timing, hit,dontflash=false)
if (timing.condition == 0) or
(timing.condition == 1 and hit == true) or
(timing.condition == 2 and hit == false)
case timing.flash_scope
when 1
unless dontflash
self.flash(timing.flash_color, timing.flash_duration * 2)
if @_total_damage >0
@flash_shake_switch = true
@flash_shake = 10
end
end
return timing.flash_color.alpha * timing.flash_duration
when 2
unless dontflash
if self.viewport != nil
self.viewport.flash(timing.flash_color, timing.flash_duration * 2)
end
end
return timing.flash_color.alpha * timing.flash_duration
when 3
unless dontflash
self.flash(nil, timing.flash_duration * 2)
end
return timing.flash_color.alpha * timing.flash_duration
end
end
return 0
end
end
end
class Sprite_Battler < RPG::Sprite
def initialize(viewport, battler = nil)
super(viewport)
@battler = battler
@battler_visible = false
@flash_shake_switch = true
@number = 0#初始化编号
end
def update
super
# 战斗者为 nil 的情况下
if @battler == nil
self.bitmap = nil
loop_animation(nil)
return
end
# 文件名和色相与当前情况有差异的情况下
if @battler.battler_name != @battler_name or
@battler.battler_hue != @battler_hue
# 获取、设置位图
@battler_name = @battler.battler_name
@battler_hue = @battler.battler_hue
self.bitmap = RPG::Cache.battler(@battler_name, @battler_hue)
@width = bitmap.width
@height = bitmap.height
self.ox = @width / 2
self.oy = @height
# 如果是战斗不能或者是隐藏状态就把透明度设置成 0
if @battler.dead? or @battler.hidden
self.opacity = 0 if DEADPIC != 1
end
end
###################################万兽熊最高#########################################
if @battler.startactive == "移动" or @battler.startactive == "返回"
if Graphics.frame_count % 4 == 0
unless BattlerName[@battler.name].nil?
@number = (@number + 1) % BattlerName[@battler.name][@battler.startactive].size
self.bitmap = RPG::Cache.battler(BattlerName[@battler.name][@battler.startactive][@number], @battler_hue)
end
end
elsif @battler.startactive == "死亡"
if Graphics.frame_count % 4 == 0
unless BattlerName[@battler.name].nil?
if @number +1 <= BattlerName[@battler.name][@battler.startactive].size
self.bitmap = RPG::Cache.battler(BattlerName[@battler.name][@battler.startactive][@number], @battler_hue)
@number += 1
else
self.bitmap = RPG::Cache.battler(BattlerName[@battler.name][@battler.startactive][BattlerName[@battler.name][@battler.startactive].size-1], @battler_hue)
end
end
end
else
if Graphics.frame_count % 10 == 0
unless BattlerName[@battler.name].nil?
@number = (@number + 1) % BattlerName[@battler.name][@battler.startactive].size
self.bitmap = RPG::Cache.battler(BattlerName[@battler.name][@battler.startactive][@number], @battler_hue)
end
end
end
#######################################################################################
# 动画 ID 与当前的情况有差异的情况下
if @battler.damage == nil and
@battler.state_animation_id != @state_animation_id
@state_animation_id = @battler.state_animation_id
loop_animation($data_animations[@state_animation_id])
end
# 应该被显示的角色的情况下
if NACTSWITCH > 0
if @battler.is_a?(Game_Actor) and @battler_visible
# 不是主状态的时候稍稍降低点透明度
if $game_temp.battle_main_phase
self.opacity += 3 if self.opacity < 255
else
self.opacity -= 3 if self.opacity > 207
end
end
end
if @battler.blink
blink_on
else
blink_off
end
unless @battler_visible
if not @battler.hidden and not @battler.dead? and
(@battler.damage == nil or @battler.damage_pop)
appear
@battler_visible = true
end
end
if @battler_visible
if @battler.hidden
$game_system.se_play($data_system.escape_se)
escape
@battler_visible = false
end
if @battler.white_flash
whiten
@battler.white_flash = false
end
if @battler.animation_id != 0
animation = $data_animations[@battler.animation_id]
animation(animation, @battler.animation_hit,@battler.damage,@battler.damage_sp, @battler.critical)
@battler.animation_id = 0
end
if @battler.damage_pop
@battler.damage = nil
@battler.damage_sp = 0
@battler.critical = false
@battler.damage_pop = false
end
if @battler.damage == nil and @battler.dead?
if DEADPIC >0
@battler.startactive = "死亡"
else
if @battler.is_a?(Game_Enemy)
$game_system.se_play($data_system.enemy_collapse_se)
else
$game_system.se_play($data_system.actor_collapse_se)
end
collapse
@battler_visible = false
end
end
end
self.x = @battler.screen_x
self.y = @battler.screen_y
self.z = @battler.screen_z
end
end
class Spriteset_Battle
alias bearrpg_initialize initialize
def initialize
@enemy_sprites = []
for enemy in $game_troop.enemies.reverse
#####修改敌人显示端口，与角色一样。
@enemy_sprites.push(Sprite_Battler.new(@viewport2, enemy))
end
bearrpg_initialize
end
end
class Arrow_Enemy < Arrow_Base
def update
super
$game_troop.enemies.size.times do
break if self.enemy.exist?
@index += 1
@index %= $game_troop.enemies.size
end
if Input.repeat?(Input::UP)
$game_system.se_play($data_system.cursor_se)
$game_troop.enemies.size.times do
@index += 1
@index %= $game_troop.enemies.size
break if self.enemy.exist?
end
end
if Input.repeat?(Input::DOWN)
$game_system.se_play($data_system.cursor_se)
$game_troop.enemies.size.times do
@index += $game_troop.enemies.size - 1
@index %= $game_troop.enemies.size
break if self.enemy.exist?
end
end
if self.enemy != nil
self.x = self.enemy.screen_x
self.y = self.enemy.screen_y
end
end
end
class Arrow_Actor < Arrow_Base
def update
super
if Input.repeat?(Input::UP)
$game_system.se_play($data_system.cursor_se)
@index += 1
@index %= $game_party.actors.size
end
if Input.repeat?(Input::DOWN)
$game_system.se_play($data_system.cursor_se)
@index += $game_party.actors.size - 1
@index %= $game_party.actors.size
end
if self.actor != nil
self.x = self.actor.screen_x
self.y = self.actor.screen_y
end
end
end
class Scene_Battle
include Scene_BattleName
attr_reader :animation1_id
def main
$game_temp.in_battle = true
$game_temp.battle_turn = 0
$game_temp.battle_event_flags.clear
$game_temp.battle_abort = false
$game_temp.battle_main_phase = false
$game_temp.battleback_name = $game_map.battleback_name
$game_temp.forcing_battler = nil
@_move_duration = 0
$game_system.battle_interpreter.setup(nil, 0)
@troop_id = $game_temp.battle_troop_id
$game_troop.setup(@troop_id)
s1 = $data_system.words.attack
s2 = $data_system.words.skill
s3 = $data_system.words.guard
s4 = $data_system.words.item
@actor_command_window = Window_Command.new(160, [s1, s2, s3, s4])
@actor_command_window.z = 900
@actor_command_window.y = 160
@actor_command_window.back_opacity = 160
@actor_command_window.active = false
@actor_command_window.visible = false
@party_command_window = Window_PartyCommand.new
@party_command_window.z = 910
@help_window = Window_Help.new
@help_window.back_opacity = 160
@help_window.z = 920
@help_window.visible = false
@status_window = Window_BattleStatus.new
@status_window.z = 930
@message_window = Window_Message.new
@message_window.z = 940
@spriteset = Spriteset_Battle.new
@wait_count = 0
if $data_system.battle_transition == ""
Graphics.transition(20)
else
Graphics.transition(40, "Graphics/Transitions/" +
$data_system.battle_transition)
end
start_phase1
loop do
Graphics.update
Input.update
update
if $scene != self
break
end
end
$game_map.refresh
Graphics.freeze
@actor_command_window.dispose
@party_command_window.dispose
@help_window.dispose
@status_window.dispose
@message_window.dispose
if @skill_window != nil
@skill_window.dispose
end
if @item_window != nil
@item_window.dispose
end
if @result_window != nil
@result_window.dispose
end
@spriteset.dispose
if $scene.is_a?(Scene_Title)
Graphics.transition
Graphics.freeze
end
if $BTEST and not $scene.is_a?(Scene_Gameover)
$scene = nil
end
end
def start_phase1
# 转移到回合 1
@phase = 1
# 清除全体同伴的行动
$game_party.clear_actions
for actor in $game_party.actors
actor.startactive = actor.hp>0? "待机" : "死亡"
end
# 设置战斗事件
setup_battle_event
end
alias bearrpg_start_phase5 start_phase5
def start_phase5
bearrpg_start_phase5
@result_window.z = 999
@phase5_wait_count = 100
end
def start_enemy_select
@enemy_arrow = Arrow_Enemy.new(@spriteset.viewport2)
@enemy_arrow.help_window = @help_window
@actor_command_window.active = false
@actor_command_window.visible = false
end
alias bearrpg_start_skill_select start_skill_select
def start_skill_select
bearrpg_start_skill_select
@skill_window.z = 999
end
alias bearrpg_start_item_select start_item_select
def start_item_select
bearrpg_start_item_select
@item_window.z = 999
end
def move(active_battler, target, ox, oy, 返回标记 = false)
ta_x = target[0]
ta_y = target[1]
if 返回标记
active_battler.movex = (active_battler.movex * (@_move_duration - 1) + ta_x.to_f - ox) / @_move_duration
active_battler.movey = (active_battler.movey * (@_move_duration - 1) + ta_y.to_f - oy) / @_move_duration
else
if @active_battler.is_a?(Game_Enemy)
active_battler.movex = (active_battler.movex * (@_move_duration - 1) + ta_x.to_f - ox ) / @_move_duration
active_battler.movey = (active_battler.movey * (@_move_duration - 1) + ta_y.to_f - oy ) / @_move_duration
else
active_battler.movex = (active_battler.movex * (@_move_duration - 1) + ta_x.to_f - ox ) / @_move_duration
active_battler.movey = (active_battler.movey * (@_move_duration - 1) + ta_y.to_f - oy ) / @_move_duration
end
end
end
def update_phase4_step3
####普通攻击的场合############################################################
if @active_battler.current_action.basic == 0 and
@active_battler.current_action.kind == 0
#开始执行移动
if not @active_battler.element_rate(UNMOVE)>100# 如果属性“不移动”不大于100
@active_battler.startactive = "移动"
@oldxy = [@active_battler.screen_x,@active_battler.screen_y]
ox,oy = @active_battler.screen_x,@active_battler.screen_y
if @active_battler.element_rate(HOMOVE)>100# 如果属性“半距离”大于100
@_move_duration = Move_Duration/2
while @_move_duration > 0
Graphics.update
Input.update
@spriteset.update
if @target_battlers[0].is_a?(Game_Actor)
tag = [@target_battlers[0].screen_x-@target_battlers[0].width-(@target_battlers[0].screen_x-ox).abs/2.abs,@target_battlers[0].screen_y+1]
else
tag = [(@target_battlers[0].screen_x+@target_battlers[0].width/1.5)+(@target_battlers[0].screen_x-ox).abs/2,@target_battlers[0].screen_y+2]
end
move(@active_battler, tag, ox, oy)
@_move_duration -= 1
end
else
@_move_duration = Move_Duration
while @_move_duration > 0
Graphics.update
Input.update
@spriteset.update
if @target_battlers[0].is_a?(Game_Actor)
tag = [@target_battlers[0].screen_x-@target_battlers[0].width/2,@target_battlers[0].screen_y+1]
else
tag = [@target_battlers[0].screen_x+@target_battlers[0].width/1.5,@target_battlers[0].screen_y+2]
end
move(@active_battler, tag, ox, oy)
@_move_duration -= 1
end
end
end
####普通攻击的场合############################################################
elsif @active_battler.current_action.kind == 1
####使用特技的场合############################################################
if not @skill.element_set.include?(UNMOVE)# 如果技能不包含“不移动属性”
@active_battler.startactive = "移动"
@oldxy = [@active_battler.screen_x,@active_battler.screen_y]
ox,oy = @active_battler.screen_x,@active_battler.screen_y
if @skill.element_set.include?(HOMOVE)#如果技能不包含“半距离”属性
@_move_duration = Move_Duration/2
while @_move_duration > 0
Graphics.update
Input.update
@spriteset.update
if @target_battlers[0].is_a?(Game_Actor)
tag = [@target_battlers[0].screen_x-@target_battlers[0].width-(@target_battlers[0].screen_x-ox).abs/2.abs,@target_battlers[0].screen_y+1]
else
tag = [(@target_battlers[0].screen_x+@target_battlers[0].width/1.5)+(@target_battlers[0].screen_x-ox).abs/2,@target_battlers[0].screen_y+2]
end
move(@active_battler, tag, ox, oy)
@_move_duration -= 1
end
else
@_move_duration = Move_Duration
while @_move_duration > 0
Graphics.update
Input.update
@spriteset.update
if @target_battlers[0].is_a?(Game_Actor)
tag = [@target_battlers[0].screen_x-@target_battlers[0].width,@target_battlers[0].screen_y+1]
else
tag = [@target_battlers[0].screen_x+@target_battlers[0].width/1.5,@target_battlers[0].screen_y+2]
end
move(@active_battler, tag, ox, oy)
@_move_duration -= 1
end
end
end
#####使用特技的场合##############################################################
end
if @active_battler.startactive != "防御"
@active_battler.startactive = "待机"
end
# 行动方动画 (ID 为 0 的情况下是白色闪烁)
if @animation1_id == 0
@active_battler.white_flash = true
else
@active_battler.animation_id = @animation1_id
@active_battler.animation_hit = true
end
for target in @target_battlers
if target.guarding? and target.damage.is_a?(Numeric)
target.startactive = "防御" if target.damage > 0
end
target.animation_id = @animation2_id
target.animation_hit = (target.damage != "Miss")
end
# 移至步骤 4
@phase4_step = 4
end
##############################################################################
def update_phase4_step4
###########################万兽熊最高########################################
# 对像方动画
for target in @target_battlers
if target.damage != nil
target.damage_pop = true
end
end
# 限制动画长度、最低 8 帧
# @wait_count = 8
##############################################################################
# 移至步骤 5
@phase4_step = 5
end
####################万兽熊最高############################
def update_phase4_step5
# 隐藏帮助窗口
@help_window.visible = false
if @active_battler.current_action.basic == 0 and
@active_battler.current_action.kind == 0
####普通攻击的场合############################################################
#执行返回
if not @active_battler.element_rate(UNMOVE)>100# 如果属性“不移动”不大于100
@active_battler.startactive = "返回"
if @active_battler.element_rate(HOMOVE)>100# 如果属性“半距离”大于100
@_move_duration = Move_Duration/2
else
@_move_duration = Move_Duration
end
ox,oy = @active_battler.screen_x - @active_battler.movex,\
@active_battler.screen_y - @active_battler.movey
while @_move_duration > 0
Graphics.update
Input.update
@spriteset.update
move(@active_battler, @oldxy, ox, oy, true)
@_move_duration -= 1
end
end
####普通攻击的场合############################################################
elsif @active_battler.current_action.kind == 1
if not @skill.element_set.include?(UNMOVE)#如果技能不包含“不移动”属性
@active_battler.startactive = "返回"
if @skill.element_set.include?(HOMOVE)#如果技能包含“半距离”属性
@_move_duration = Move_Duration/2
else
@_move_duration = Move_Duration
end
ox,oy = @active_battler.screen_x - @active_battler.movex,\
@active_battler.screen_y - @active_battler.movey
while @_move_duration > 0
Graphics.update
Input.update
@spriteset.update
move(@active_battler, @oldxy, ox, oy, true)
@_move_duration -= 1
end
end
####使用特技的场合############################################################
end
if @active_battler.startactive != "防御"
@active_battler.startactive = "待机"
end
# 刷新状态窗口
@status_window.refresh
# 显示伤害
for target in @target_battlers
target.startactive = "待机"
if target.damage != nil
target.damage_pop = true
end
end
# 移至步骤 6
@phase4_step = 6
end
def update_phase4_step6
# 清除强制行动对像的战斗者
$game_temp.forcing_battler = nil
@active_battler.movex = 0
@active_battler.movey = 0
@active_battler.startactive = "待机" if @active_battler.startactive != "死亡"
# 公共事件 ID 有效的情况下
if @common_event_id > 0
# 设置事件
common_event = $data_common_events[@common_event_id]
$game_system.battle_interpreter.setup(common_event.list, 0)
end
# 移至步骤 1
@phase4_step = 1
end
end

复制代码

这是熊大的横版……

冰枫o鲍辰 · 发表于 2015-1-12 23:45:44

#------------------制作by bluefool,转载请保留------------------
module Blue
#这个是控制显示最近的多少条信息的,当超出一屏能显示的值的话可通过先按一下shift
#然后用上下翻看内容。再按一次shift则解除激活
Blue_max = 12
#这个填写进如游戏时生成的系统语言,
INTRO = "欢迎进入游戏！"
#战斗画面时即时消息窗口的x坐标
BATAM_X = 0
#战斗画面时即时消息窗口的y坐标
BATAM_Y = 90
#用于清空hash表，可以不管它,但不要让Blue_max大于它，当然，它的值也可以改变
NAM_MAX = 50
#主要传递信息参数为函数$am,参见脚本内容
end
#-------------------------------------------
class Scene_Load < Scene_File
#--------------------------------------------------------------------------
# ● 确定时的处理
#--------------------------------------------------------------------------
def on_decision(filename)
# 文件不存在的情况下
unless FileTest.exist?(filename)
# 演奏冻结 SE
$game_system.se_play($data_system.buzzer_se)
return
end
# 演奏读档 SE
$game_system.se_play($data_system.load_se)
# 写入存档数据
file = File.open(filename, "rb")
read_save_data(file)
file.close
# 还原 BGM、BGS
$game_system.bgm_play($game_system.playing_bgm)
$game_system.bgs_play($game_system.playing_bgs)
# 刷新地图 (执行并行事件)
$a = {}
$game_map.update
# 切换到地图画面
$scene = Scene_Map.new
end
end
class Game_Player < Game_Character
def update
# 本地变量记录移动信息
last_moving = moving?
# 移动中、事件执行中、强制移动路线中、
# 信息窗口一个也不显示的时候
unless moving? or $game_system.map_interpreter.running? or
@move_route_forcing or $game_temp.message_window_showing or $ccc == 1
case Input.dir4
when 2
move_down
when 4
move_left
when 6
move_right
when 8
move_up
end
end
# 本地变量记忆坐标
last_real_x = @real_x
last_real_y = @real_y
super
# 角色向下移动、画面上的位置在中央下方的情况下
if @real_y > last_real_y and @real_y - $game_map.display_y > CENTER_Y
# 画面向下卷动
$game_map.scroll_down(@real_y - last_real_y)
end
# 角色向左移动、画面上的位置在中央左方的情况下
if @real_x < last_real_x and @real_x - $game_map.display_x < CENTER_X
# 画面向左卷动
$game_map.scroll_left(last_real_x - @real_x)
end
# 角色向右移动、画面上的位置在中央右方的情况下
if @real_x > last_real_x and @real_x - $game_map.display_x > CENTER_X
# 画面向右卷动
$game_map.scroll_right(@real_x - last_real_x)
end
# 角色向上移动、画面上的位置在中央上方的情况下
if @real_y < last_real_y and @real_y - $game_map.display_y < CENTER_Y
# 画面向上卷动
$game_map.scroll_up(last_real_y - @real_y)
end
# 不在移动中的情况下
unless moving?
# 上次主角移动中的情况
if last_moving
# 与同位置的事件接触就判定为事件启动
result = check_event_trigger_here([1,2])
# 没有可以启动的事件的情况下
if result == false
# 调试模式为 ON 并且按下 CTRL 键的情况下除外
unless $DEBUG and Input.press?(Input::CTRL)
# 遇敌计数下降
if @encounter_count > 0
@encounter_count -= 1
end
end
end
end
# 按下 C 键的情况下
if Input.trigger?(Input::C)
# 判定为同位置以及正面的事件启动
check_event_trigger_here([0])
check_event_trigger_there([0,1,2])
end
end
end
end
#==============================================================================
# ■ Scene_Title
#------------------------------------------------------------------------------
# 　处理标题画面的类。
#==============================================================================
class Scene_Title
#--------------------------------------------------------------------------
# ● 命令 : 新游戏
#--------------------------------------------------------------------------
def command_new_game
# 演奏确定 SE
$game_system.se_play($data_system.decision_se)
# 停止 BGM
Audio.bgm_stop
# 重置测量游戏时间用的画面计数器
Graphics.frame_count = 0
# 生成各种游戏对像
$game_temp = Game_Temp.new
$game_system = Game_System.new
$game_switches = Game_Switches.new
$game_variables = Game_Variables.new
$game_self_switches = Game_SelfSwitches.new
$game_screen = Game_Screen.new
$game_actors = Game_Actors.new
$game_party = Game_Party.new
$game_troop = Game_Troop.new
$game_map = Game_Map.new
$game_player = Game_Player.new
# 设置初期同伴位置
$game_party.setup_starting_members
# 设置初期位置的地图
$game_map.setup($data_system.start_map_id)
# 主角向初期位置移动
$game_player.moveto($data_system.start_x, $data_system.start_y)
# 刷新主角
$game_player.refresh
# 执行地图设置的 BGM 与 BGS 的自动切换
$game_map.autoplay
# 刷新地图 (执行并行事件)
$game_map.update
$a = {}
$am = Blue::INTRO
$ccc = 0
# 切换地图画面
$scene = Scene_Map.new
end
#--------------------------------------------------------------------------
# ● 命令 : 继续
#--------------------------------------------------------------------------
def command_continue
# 继续无效的情况下
unless @continue_enabled
# 演奏无效 SE
$game_system.se_play($data_system.buzzer_se)
return
end
# 演奏确定 SE
$game_system.se_play($data_system.decision_se)
# 切换到读档画面
$scene = Scene_Load.new
end
#--------------------------------------------------------------------------
# ● 命令 : 退出
#--------------------------------------------------------------------------
def command_shutdown
# 演奏确定 SE
$game_system.se_play($data_system.decision_se)
# BGM、BGS、ME 的淡入淡出
Audio.bgm_fade(800)
Audio.bgs_fade(800)
Audio.me_fade(800)
# 退出
$scene = nil
end
#--------------------------------------------------------------------------
# ● 战斗测试
#--------------------------------------------------------------------------
def battle_test
# 载入数据库 (战斗测试用)
$data_actors = load_data("Data/BT_Actors.rxdata")
$data_classes = load_data("Data/BT_Classes.rxdata")
$data_skills = load_data("Data/BT_Skills.rxdata")
$data_items = load_data("Data/BT_Items.rxdata")
$data_weapons = load_data("Data/BT_Weapons.rxdata")
$data_armors = load_data("Data/BT_Armors.rxdata")
$data_enemies = load_data("Data/BT_Enemies.rxdata")
$data_troops = load_data("Data/BT_Troops.rxdata")
$data_states = load_data("Data/BT_States.rxdata")
$data_animations = load_data("Data/BT_Animations.rxdata")
$data_tilesets = load_data("Data/BT_Tilesets.rxdata")
$data_common_events = load_data("Data/BT_CommonEvents.rxdata")
$data_system = load_data("Data/BT_System.rxdata")
# 重置测量游戏时间用的画面计数器
Graphics.frame_count = 0
# 生成各种游戏对像
$game_temp = Game_Temp.new
$game_system = Game_System.new
$game_switches = Game_Switches.new
$game_variables = Game_Variables.new
$game_self_switches = Game_SelfSwitches.new
$game_screen = Game_Screen.new
$game_actors = Game_Actors.new
$game_party = Game_Party.new
$game_troop = Game_Troop.new
$game_map = Game_Map.new
$game_player = Game_Player.new
$a = {0=>"进入战斗测试."}
# 设置战斗测试用同伴
$game_party.setup_battle_test_members
# 设置队伍 ID、可以逃走标志、战斗背景
$game_temp.battle_troop_id = $data_system.test_troop_id
$game_temp.battle_can_escape = true
$game_map.battleback_name = $data_system.battleback_name
# 演奏战斗开始 BGM
$game_system.se_play($data_system.battle_start_se)
# 演奏战斗 BGM
$game_system.bgm_play($game_system.battle_bgm)
# 切换到战斗画面
$scene = Scene_Battle.new
end
end
#-------------------------------------------------------
class Scene_Map
#--------------------------------------------------------------------------
# ● 主处理
#--------------------------------------------------------------------------
def main
@spriteset = Spriteset_Map.new
@message_window = Window_Message.new
@down_window = Window_Down.new
####################################修改！
@v = Viewport.new(0,460,320,20)
@v.color.set(0,0,0,100)
@tf = Type_Field.new(@v,"",16)
####################################修改！
Graphics.transition
# 主循环
loop do
Graphics.update
Input.update
update
if $scene != self
break
end
end
Graphics.freeze
@spriteset.dispose
@message_window.dispose
@down_window.dispose
############
@v.dispose
@tf.dispose
###############
if $scene.is_a?(Scene_Title)
Graphics.transition
Graphics.freeze
end
@am_size = $a.size
end
#---------------------
def bluefool_sort
if $am != nil
if $a.size > Blue::NAM_MAX
a_temp = {}
j = 0
for i in ($a.size - Blue::Blue_max)...$a.size
a_temp[j] = $a[i]
j += 1
end
$a = a_temp
end
if $am.length < 54
$a[$a.size] = $am
else
while $am.length > 53
i = 53
while (/\W/ =~ $am[i-3,3]) != nil
i -= 1
end
$a[$a.size] = $am[0,i]
$am = $am[i ,$am.length - i]
end
$a[$a.size] = $am
end
$am = nil
end
end
#--------------------------------------------------------------------------
# ● 刷新画面
#--------------------------------------------------------------------------
def update
# 循环
loop do
# 按照地图、实例、主角的顺序刷新
# (本更新顺序不会在的满足事件的执行条件下成为给予角色瞬间移动
# 的机会的重要因素)
$game_map.update
$game_system.map_interpreter.update
$game_player.update
# 系统 (计时器)、画面刷新
$game_system.update
$game_screen.update
# 如果主角在场所移动中就中断循环
unless $game_temp.player_transferring
break
end
# 执行场所移动
transfer_player
# 处理过渡中的情况下、中断循环
if $game_temp.transition_processing
break
end
end
# 刷新活动块
@spriteset.update
# 刷新信息窗口
###########################此处有修改！###########################
# 输入法测试
@tf.update
if RInput.trigger?(RInput::ENTER) and Input.press?(Input::CTRL)
if (text = @tf.get_text) != ""
if (text = @tf.get_text) == "help"
$game_switches[1]=true
end
if (text = @tf.get_text) == "cheat"
$game_switches[2]=true
end
$am = $game_actors[1].name+": " [email protected]_text
$game_map.need_refresh = true
$scene = Scene_Map.new
end
end
################################################################
@message_window.update
# 游戏结束的情况下
if $game_temp.gameover
# 切换的游戏结束画面
$scene = Scene_Gameover.new
return
end
# 返回标题画面的情况下
if $game_temp.to_title
# 切换到标题画面
$scene = Scene_Title.new
return
end
# 处理过渡中的情况下
if $game_temp.transition_processing
# 清除过渡处理中标志
$game_temp.transition_processing = false
# 执行过渡
if $game_temp.transition_name == ""
Graphics.transition(20)
else
Graphics.transition(40, "Graphics/Transitions/" +
$game_temp.transition_name)
end
end
# 显示信息窗口中的情况下
if $game_temp.message_window_showing
return
end
# 遇敌计数为 0 且、且遇敌列表不为空的情况下
if $game_player.encounter_count == 0 and $game_map.encounter_list != []
# 不是在事件执行中或者禁止遇敌中
unless $game_system.map_interpreter.running? or
$game_system.encounter_disabled
# 确定队伍
n = rand($game_map.encounter_list.size)
troop_id = $game_map.encounter_list[n]
# 队伍有效的话
if $data_troops[troop_id] != nil
# 设置调用战斗标志
$game_temp.battle_calling = true
$game_temp.battle_troop_id = troop_id
$game_temp.battle_can_escape = true
$game_temp.battle_can_lose = false
$game_temp.battle_proc = nil
end
end
end
#---------------------------------------------
bluefool_sort
if @am_size != $a.size
@down_window.refresh
if $a != nil and $a.size < Blue::Blue_max + 1
@down_window.index = $a.size/2 - 1
elsif $a != nil and $a.size > Blue::Blue_max
@down_window.index = Blue::Blue_max/2 - 1
end
@am_size = $a.size
end
# if Input.trigger?(Input::A)
# if @down_window.active == false
# @down_window.active = true
# $ccc = 1
# else
# @down_window.active = false
# $ccc = 0
# end
# end
# if Input.trigger?(Input::DOWN)#输入DOWN键的情况
# if @down_window.active == true and @down_window.index < (@down_window.item_max-1)/2
# @down_window.index += 1
# end
# end
# if Input.trigger?(Input::UP)#输入UP键的情况
# if @down_window.active == true and @down_window.index > 0
# @down_window.index -= 1
# end
# end
#----------------------------------------------
# 按下 B 键的情况下
if Input.trigger?(Input::B)
# 不是在事件执行中或菜单禁止中
unless $game_system.map_interpreter.running? or
$game_system.menu_disabled
# 设置菜单调用标志以及 SE 演奏
$game_temp.menu_calling = true
$game_temp.menu_beep = true
end
end
# 调试模式为 ON 并且按下 F9 键的情况下
if $DEBUG and Input.press?(Input::F9)
# 设置调用调试标志
$game_temp.debug_calling = true
end
# 不在主角移动中的情况下
unless $game_player.moving?
# 执行各种画面的调用
if $game_temp.battle_calling
call_battle
elsif $game_temp.shop_calling
call_shop
elsif $game_temp.name_calling
call_name
elsif $game_temp.menu_calling
call_menu
elsif $game_temp.save_calling
call_save
elsif $game_temp.debug_calling
call_debug
end
end
end
end
class Game_Battler
def bluefool_sort
if $am != nil
if $am.length < 54
$a[$a.size] = $am
else
while $am.length > 53
i = 53
while (/\W/ =~ $am[i-3,3]) != nil
i -= 1
end
$a[$a.size] = $am[0,i]
$am = $am[i ,$am.length - i]
end
$a[$a.size] = $am
end
$am = nil
end
end
#--------------------------------------------------------------------------
# ● 应用连续伤害效果
#--------------------------------------------------------------------------
def slip_damage_effect
# 设置伤害
self.damage = self.maxhp / 10
# 分散
if self.damage.abs > 0
amp = [self.damage.abs * 15 / 100, 1].max
self.damage += rand(amp+1) + rand(amp+1) - amp
end
# HP 的伤害减法运算
self.hp -= self.damage
if self.damage > 0
$am = "异常状态使#{self.name}受到了#{self.damage}点伤害."
elsif self.damage < 0
$am = "异常状态使#{self.name}恢复了#{self.damage.abs}点#{$data_system.words.hp}"
end
bluefool_sort
# 过程结束
return true
end
#--------------------------------------------------------------------------
# ● 应用通常攻击效果
# attacker : 攻击者 (battler)
#--------------------------------------------------------------------------
def attack_effect(attacker)
# 清除会心一击标志
self.critical = false
# 第一命中判定
hit_result = (rand(100) < attacker.hit)
# 命中的情况下
if hit_result == true
# 计算基本伤害
atk = [attacker.atk - self.pdef / 2, 0].max
self.damage = atk * (20 + attacker.str) / 20
# 属性修正
self.damage *= elements_correct(attacker.element_set)
self.damage /= 100
# 伤害符号正确的情况下
if self.damage > 0
# 会心一击修正
if rand(100) < 4 * attacker.dex / self.agi
self.damage *= 2
self.critical = true
end
# 防御修正
if self.guarding?
self.damage /= 2
end
end
# 分散
if self.damage.abs > 0
amp = [self.damage.abs * 15 / 100, 1].max
self.damage += rand(amp+1) + rand(amp+1) - amp
end
# 第二命中判定
eva = 8 * self.agi / attacker.dex + self.eva
hit = self.damage < 0 ? 100 : 100 - eva
hit = self.cant_evade? ? 100 : hit
hit_result = (rand(100) < hit)
end
# 命中的情况下
if hit_result == true
# 状态冲击解除
remove_states_shock
# HP 的伤害计算
self.hp -= self.damage
$am = "#{attacker.name}对#{self.name}造成了#{self.damage}伤害."
bluefool_sort
# 状态变化
@state_changed = false
states_plus(attacker.plus_state_set)
states_minus(attacker.minus_state_set)
# Miss 的情况下
else
# 伤害设置为 "Miss"
self.damage = "Miss"
$am = "#{attacker.name}击空了."
bluefool_sort
# 清除会心一击标志
self.critical = false
end
# 过程结束
return true
end
#--------------------------------------------------------------------------
# ● 应用特技效果
# user : 特技的使用者 (battler)
# skill : 特技
#--------------------------------------------------------------------------
def skill_effect(user, skill)
# 清除会心一击标志
self.critical = false
# 特技的效果范围是 HP 1 以上的己方、自己的 HP 为 0、
# 或者特技的效果范围是 HP 0 的己方、自己的 HP 为 1 以上的情况下
if ((skill.scope == 3 or skill.scope == 4) and self.hp == 0) or
((skill.scope == 5 or skill.scope == 6) and self.hp >= 1)
# 过程结束
return false
end
# 清除有效标志
effective = false
# 公共事件 ID 是有效的情况下,设置为有效标志
effective |= skill.common_event_id > 0
# 第一命中判定
hit = skill.hit
if skill.atk_f > 0
hit *= user.hit / 100
end
hit_result = (rand(100) < hit)
# 不确定的特技的情况下设置为有效标志
effective |= hit < 100
# 命中的情况下
if hit_result == true
# 计算威力
power = skill.power + user.atk * skill.atk_f / 100
if power > 0
power -= self.pdef * skill.pdef_f / 200
power -= self.mdef * skill.mdef_f / 200
power = [power, 0].max
end
# 计算倍率
rate = 20
rate += (user.str * skill.str_f / 100)
rate += (user.dex * skill.dex_f / 100)
rate += (user.agi * skill.agi_f / 100)
rate += (user.int * skill.int_f / 100)
# 计算基本伤害
self.damage = power * rate / 20
# 属性修正
self.damage *= elements_correct(skill.element_set)
self.damage /= 100
# 伤害符号正确的情况下
if self.damage > 0
# 防御修正
if self.guarding?
self.damage /= 2
end
end
# 分散
if skill.variance > 0 and self.damage.abs > 0
amp = [self.damage.abs * skill.variance / 100, 1].max
self.damage += rand(amp+1) + rand(amp+1) - amp
end
# 第二命中判定
eva = 8 * self.agi / user.dex + self.eva
hit = self.damage < 0 ? 100 : 100 - eva * skill.eva_f / 100
hit = self.cant_evade? ? 100 : hit
hit_result = (rand(100) < hit)
# 不确定的特技的情况下设置为有效标志
effective |= hit < 100
end
# 命中的情况下
if hit_result == true
# 威力 0 以外的物理攻击的情况下
if skill.power != 0 and skill.atk_f > 0
# 状态冲击解除
remove_states_shock
# 设置有效标志
effective = true
end
# HP 的伤害减法运算
last_hp = self.hp
self.hp -= self.damage
if self.damage > 0
$am = "#{user.name}对#{self.name}造成了#{self.damage}伤害."
elsif self.damage < 0
if user == self
$am = "#{user.name}恢复了自己#{self.damage.abs}点#{$data_system.words.hp}."
else
$am = "#{user.name}恢复了#{self.name}#{self.damage.abs}点#{$data_system.words.hp}."
end
end
bluefool_sort
effective |= self.hp != last_hp
# 状态变化
@state_changed = false
effective |= states_plus(skill.plus_state_set)
effective |= states_minus(skill.minus_state_set)
# 威力为 0 的场合
if skill.power == 0
# 伤害设置为空的字串
self.damage = ""
# 状态没有变化的情况下
unless @state_changed
# 伤害设置为 "Miss"
self.damage = "Miss"
$am = "#{user.name}没有击中."
bluefool_sort
end
end
# Miss 的情况下
else
# 伤害设置为 "Miss"
self.damage = "Miss"
$am = "#{user.name}没有击中."
bluefool_sort
end
# 不在战斗中的情况下
unless $game_temp.in_battle
# 伤害设置为 nil
self.damage = nil
end
# 过程结束
return effective
end
end
class Scene_Battle
#--------------------------------------------------------------------------
# ● 刷新画面 (主回合步骤 1 : 准备行动)
#--------------------------------------------------------------------------
def update_phase4_step1
# 隐藏帮助窗口
@help_window.visible = false
# 判定胜败
if judge
# 胜利或者失败的情况下 : 过程结束
return
end
# 强制行动的战斗者不存在的情况下
if $game_temp.forcing_battler == nil
# 设置战斗事件
setup_battle_event
# 执行战斗事件中的情况下
if $game_system.battle_interpreter.running?
return
end
end
# 强制行动的战斗者存在的情况下
if $game_temp.forcing_battler != nil
# 在头部添加后移动
@action_battlers.delete($game_temp.forcing_battler)
@action_battlers.unshift($game_temp.forcing_battler)
end
# 未行动的战斗者不存在的情况下 (全员已经行动)
if @action_battlers.size == 0
# 开始同伴命令回合
start_phase2
return
end
# 初始化动画 ID 和公共事件 ID
@animation1_id = 0
@animation2_id = 0
@common_event_id = 0
# 未行动的战斗者移动到序列的头部
@active_battler = @action_battlers.shift
# 如果已经在战斗之外的情况下
if @active_battler.index == nil
return
end
# 连续伤害
if @active_battler.hp > 0 and @active_battler.slip_damage?
@active_battler.slip_damage_effect
@active_battler.damage_pop = true
@down_window.refresh
end
# 自然解除状态
@active_battler.remove_states_auto
# 刷新状态窗口
@status_window.refresh
# 移至步骤 2
@phase4_step = 2
end
#--------------------------------------------------------------------------
# ● 开始结束战斗回合
#--------------------------------------------------------------------------
def start_phase5
# 转移到回合 5
@phase = 5
# 演奏战斗结束 ME
$game_system.me_play($game_system.battle_end_me)
# 还原为战斗开始前的 BGM
$game_system.bgm_play($game_temp.map_bgm)
# 初始化 EXP、金钱、宝物
exp = 0
gold = 0
treasures = []
# 循环
for enemy in $game_troop.enemies
# 敌人不是隐藏状态的情况下
unless enemy.hidden
# 获得 EXP、增加金钱
exp += enemy.exp
gold += enemy.gold
# 出现宝物判定
if rand(100) < enemy.treasure_prob
if enemy.item_id > 0
treasures.push($data_items[enemy.item_id])
end
if enemy.weapon_id > 0
treasures.push($data_weapons[enemy.weapon_id])
end
if enemy.armor_id > 0
treasures.push($data_armors[enemy.armor_id])
end
end
end
end
# 限制宝物数为 6 个
treasures = treasures[0..5]
# 获得 EXP
for i in 0...$game_party.actors.size
actor = $game_party.actors[i]
if actor.cant_get_exp? == false
last_level = actor.level
actor.exp += exp
if actor.level > last_level
@status_window.level_up(i)
end
end
end
# 获得金钱
$game_party.gain_gold(gold)
$am = "获得#{exp}经验，#{gold}#{$data_system.words.gold}"
bluefool_sort
@down_window.refresh
# 获得宝物
for item in treasures
case item
when RPG::Item
$game_party.gain_item(item.id, 1)
$am = "获得#{$data_items[item.id].name}"
bluefool_sort
when RPG::Weapon
$game_party.gain_weapon(item.id, 1)
$am = "获得#{$data_weapons[item.id].name}"
bluefool_sort
when RPG::Armor
$game_party.gain_armor(item.id, 1)
$am = "获得#{$data_armors[item.id].name}"
bluefool_sort
end
@down_window.refresh
end
# 生成战斗结果窗口
@result_window = Window_BattleResult.new(exp, gold, treasures)
# 设置等待计数
@phase5_wait_count = 100
end
#--------------------------------------------------------------------------
# ● 生成基本行动结果
#--------------------------------------------------------------------------
def make_basic_action_result
# 攻击的情况下
if @active_battler.current_action.basic == 0
# 设置攻击 ID
@animation1_id = @active_battler.animation1_id
@animation2_id = @active_battler.animation2_id
# 行动方的战斗者是敌人的情况下
if @active_battler.is_a?(Game_Enemy)
if @active_battler.restriction == 3
target = $game_troop.random_target_enemy
elsif @active_battler.restriction == 2
target = $game_party.random_target_actor
else
index = @active_battler.current_action.target_index
target = $game_party.smooth_target_actor(index)
end
end
# 行动方的战斗者是角色的情况下
if @active_battler.is_a?(Game_Actor)
if @active_battler.restriction == 3
target = $game_party.random_target_actor
elsif @active_battler.restriction == 2
target = $game_troop.random_target_enemy
else
index = @active_battler.current_action.target_index
target = $game_troop.smooth_target_enemy(index)
end
end
# 设置对像方的战斗者序列
@target_battlers = [target]
for target in @target_battlers
$am = "#{@active_battler.name}对#{target.name}发起了进攻!"
bluefool_sort
target.attack_effect(@active_battler)
end
return
end
# 防御的情况下
if @active_battler.current_action.basic == 1
@help_window.set_text($data_system.words.guard, 1)
$am = "#{@active_battler.name}选择了防御."
bluefool_sort
return
end
# 逃跑的情况下
if @active_battler.is_a?(Game_Enemy) and
@active_battler.current_action.basic == 2
# 帮助窗口显示"逃跑"
@help_window.set_text("逃跑", 1)
# 逃跑
@active_battler.escape
return
end
# 什么也不做的情况下
if @active_battler.current_action.basic == 3
# 清除强制行动对像的战斗者
$game_temp.forcing_battler = nil
# 移至步骤 1
@phase4_step = 1
return
end
end
#--------------------------------------------------------------------------
# ● 生成特技行动结果
#--------------------------------------------------------------------------
def make_skill_action_result
# 获取特技
[url=home.php?mod=space&uid=260100]@skill[/url] = $data_skills[@active_battler.current_action.skill_id]
# 如果不是强制行动
unless @active_battler.current_action.forcing
# 因为 SP 耗尽而无法使用的情况下
unless @active_battler.skill_can_use?(@skill.id)
# 清除强制行动对像的战斗者
$game_temp.forcing_battler = nil
# 移至步骤 1
@phase4_step = 1
return
end
end
# 消耗 SP
@active_battler.sp -= @skill.sp_cost
# 刷新状态窗口
@status_window.refresh
# 在帮助窗口显示特技名
@help_window.set_text(@skill.name, 1)
# 设置动画 ID
@animation1_id = @skill.animation1_id
@animation2_id = @skill.animation2_id
# 设置公共事件 ID
@common_event_id = @skill.common_event_id
# 设置对像侧战斗者
set_target_battlers(@skill.scope)
# 应用特技效果
for target in @target_battlers
case @skill.scope
when 1
$am = "#{@active_battler.name}使用#{@skill.name}攻击#{target.name}!"
when 2
$am = "#{@active_battler.name}使用#{@skill.name}攻击#{target.name}!"
when 7
$am = "#{@active_battler.name}对自己使用#{@skill.name}."
else
if target == @active_battler
$am = "#{@active_battler.name}对自己使用#{@skill.name}."
else
$am = "#{@active_battler.name}对#{target.name}使用#{@skill.name}."
end
end
bluefool_sort
target.skill_effect(@active_battler, @skill)
end
end
#--------------------------------------------------------------------------
# ● 生成物品行动结果
#--------------------------------------------------------------------------
def make_item_action_result
# 获取物品
@item = $data_items[@active_battler.current_action.item_id]
# 因为物品耗尽而无法使用的情况下
unless $game_party.item_can_use?(@item.id)
# 移至步骤 1
@phase4_step = 1
return
end
# 消耗品的情况下
if @item.consumable
# 使用的物品减 1
$game_party.lose_item(@item.id, 1)
end
# 在帮助窗口显示物品名
@help_window.set_text(@item.name, 1)
# 设置动画 ID
@animation1_id = @item.animation1_id
@animation2_id = @item.animation2_id
# 设置公共事件 ID
@common_event_id = @item.common_event_id
# 确定对像
index = @active_battler.current_action.target_index
target = $game_party.smooth_target_actor(index)
# 设置对像侧战斗者
set_target_battlers(@item.scope)
# 应用物品效果
for target in @target_battlers
target.item_effect(@item)
if target == @active_battler
$am = "#{@active_battler.name}对自己使用了#{@item.name}"
else
$am = "#{@active_battler.name}对#{target.name}使用了#{@item.name}"
end
bluefool_sort
end
end
#--------------------------------------------------------------------------
# ● 刷新画面 (主回合步骤 4 : 对像方动画)
#--------------------------------------------------------------------------
def update_phase4_step4
# 对像方动画
for target in @target_battlers
target.animation_id = @animation2_id
target.animation_hit = (target.damage != "Miss")
end
@down_window.refresh
@wait_count = 8
# 移至步骤 5
@phase4_step = 5
end
def bluefool_sort
if $am != nil
if $a.size > Blue::NAM_MAX
a_temp = {}
j = 0
for i in ($a.size - Blue::Blue_max)...$a.size
a_temp[j] = $a[i]
j += 1
end
$a = a_temp
end
if $am.length < 54
$a[$a.size] = $am
else
while $am.length > 53
i = 53
while (/\W/ =~ $am[i-3,3]) != nil
i -= 1
end
$a[$a.size] = $am[0,i]
$am = $am[i ,$am.length - i]
end
$a[$a.size] = $am
end
$am = nil
end
end
def main
$am = "队伍进入战斗！"
bluefool_sort
$game_temp.in_battle = true
$game_temp.battle_turn = 0
$game_temp.battle_event_flags.clear
$game_temp.battle_abort = false
$game_temp.battle_main_phase = false
$game_temp.battleback_name = $game_map.battleback_name
$game_temp.forcing_battler = nil
$game_system.battle_interpreter.setup(nil, 0)
@troop_id = $game_temp.battle_troop_id
$game_troop.setup(@troop_id)
#生成角色命令窗口
s1 = $data_system.words.attack
s2 = $data_system.words.skill
s3 = $data_system.words.guard
s4 = $data_system.words.item
@actor_command_window = Window_Command.new(160, [s1, s2, s3, s4])
@actor_command_window.y = 160
@actor_command_window.back_opacity = 160
@actor_command_window.active = false
@actor_command_window.visible = false
# 生成其它窗口
@party_command_window = Window_PartyCommand.new
@help_window = Window_Help.new
@help_window.back_opacity = 160
@help_window.visible = false
@status_window = Window_BattleStatus.new
@message_window = Window_Message.new
@down_window = Window_Down.new
@down_window.y = Blue::BATAM_Y
@down_window.z = @actor_command_window.z - 10
# 生成活动块
@spriteset = Spriteset_Battle.new
# 初始化等待计数
@wait_count = 0
# 执行过渡
if $data_system.battle_transition == ""
Graphics.transition(20)
else
Graphics.transition(40, "Graphics/Transitions/" +
$data_system.battle_transition)
end
# 开始自由战斗回合
start_phase1
# 主循环
loop do
Graphics.update
Input.update
update
if $scene != self
break
end
end
# 刷新地图
$game_map.refresh
# 准备过渡
Graphics.freeze
# 释放窗口
@actor_command_window.dispose
@party_command_window.dispose
@help_window.dispose
@status_window.dispose
@message_window.dispose
@down_window.dispose
$am = "战斗结束"
bluefool_sort
if @skill_window != nil
@skill_window.dispose
end
if @item_window != nil
@item_window.dispose
end
if @result_window != nil
@result_window.dispose
end
# 释放活动块
@spriteset.dispose
# 标题画面切换中的情况
if $scene.is_a?(Scene_Title)
# 淡入淡出画面
Graphics.transition
Graphics.freeze
end
# 战斗测试或者游戏结束以外的画面切换中的情况
if $BTEST and not $scene.is_a?(Scene_Gameover)
$scene = nil
end
end
end
#---------------------------------------------------------
class Interpreter
def bluefool_sort
if $am != nil
if $a.size > Blue::NAM_MAX
a_temp = {}
j = 0
for i in ($a.size - Blue::Blue_max)...$a.size
a_temp[j] = $a[i]
j += 1
end
$a = a_temp
end
if $am.length < 54
$a[$a.size] = $am
else
while $am.length > 53
i = 53
while (/\W/ =~ $am[i-3,3]) != nil
i -= 1
end
$a[$a.size] = $am[0,i]
$am = $am[i ,$am.length - i]
end
$a[$a.size] = $am
end
$am = nil
end
end
def command_101
if $game_temp.message_text != nil
return false
end
# 设置信息结束后待机和返回调用标志
@message_waiting = true
$game_temp.message_proc = Proc.new { @message_waiting = false }
# message_text 设置为 1 行
$game_temp.message_text = @list[@index].parameters[0] + "\n"
if (@list[@index].parameters[0]).split(/\\/)[1] != nil
$am = @list[@index].parameters[0].split(/\\/)[0]
else
$am = @list[@index].parameters[0]
end
bluefool_sort
line_count = 1
# 循环
loop do
# 下一个事件指令为文章两行以上的情况
if @list[@index+1].code == 401
# message_text 添加到第 2 行以下
$game_temp.message_text += @list[@index+1].parameters[0] + "\n"
$am = @list[@index+1].parameters[0]
bluefool_sort
line_count += 1
# 事件指令不在文章两行以下的情况
else
# 下一个事件指令为显示选择项的情况下
if @list[@index+1].code == 102
# 如果选择项能收纳在画面里
if @list[@index+1].parameters[0].size <= 4 - line_count
# 推进索引
@index += 1
# 设置选择项
$game_temp.choice_start = line_count
setup_choices(@list[@index].parameters)
end
# 下一个事件指令为处理输入数值的情况下
elsif @list[@index+1].code == 103
# 如果数值输入窗口能收纳在画面里
if line_count < 4
# 推进索引
@index += 1
# 设置输入数值
$game_temp.num_input_start = line_count
$game_temp.num_input_variable_id = @list[@index].parameters[0]
$game_temp.num_input_digits_max = @list[@index].parameters[1]
end
end
# 继续
return true
end
# 推进索引
@index += 1
end
end
def command_125
value = operate_value(@parameters[0], @parameters[1], @parameters[2])
$game_party.gain_gold(value)
if value >= 0
$am = "#{$game_party.actors[0].name}得到了#{value}#{$data_system.words.gold}"
else
$am = "#{$game_party.actors[0].name}失去了#{value.abs.to_s}#{$data_system.words.gold}"
end
bluefool_sort
Audio.se_play("Audio/SE/"+"006-System06",100,100)
return true
end
def command_126
value = operate_value(@parameters[1], @parameters[2], @parameters[3])
# 增减物品
$game_party.gain_item(@parameters[0], value)
if value >= 0
$am = "#{$game_party.actors[0].name}得到了#{value.abs.to_s}个#{$data_items[@parameters[0]].name}"
else
$am = "#{$game_party.actors[0].name}失去了#{value.abs.to_s}个#{$data_items[@parameters[0]].name}"
end
bluefool_sort
Audio.se_play("Audio/SE/"+"006-System06",100,100)
return true
end
def command_127
value = operate_value(@parameters[1], @parameters[2], @parameters[3])
# 增减武器
$game_party.gain_weapon(@parameters[0], value)
if value >= 0
$am = "#{$game_party.actors[0].name}得到了#{value.abs.to_s}个#{$data_weapons[@parameters[0]].name}"
else
$am = "#{$game_party.actors[0].name}失去了#{value.abs.to_s}个#{$data_weapons[@parameters[0]].name}"
end
bluefool_sort
Audio.se_play("Audio/SE/"+"006-System06",100,100)
return true
end
def command_128
value = operate_value(@parameters[1], @parameters[2], @parameters[3])
# 增减防具
$game_party.gain_armor(@parameters[0], value)
if value >= 0
$am = "#{$game_party.actors[0].name}得到了#{value.abs.to_s}个#{$data_armors[@parameters[0]].name}"
else
$am = "#{$game_party.actors[0].name}失去了#{value.abs.to_s}个#{$data_armors[@parameters[0]].name}"
end
bluefool_sort
Audio.se_play("Audio/SE/"+"006-System06",100,100)
return true
end
def command_129
# 获取角色
actor = $game_actors[@parameters[0]]
# 角色有效的情况下
if actor != nil
# 操作分支
if @parameters[1] == 0
if @parameters[2] == 1
$game_actors[@parameters[0]].setup(@parameters[0])
end
$game_party.add_actor(@parameters[0])
Audio.me_play("Audio/ME/"+"002-Victory02",100,100)
$am = "#{$game_actors[@parameters[0]].name}加入队伍!"
bluefool_sort
else
$game_party.remove_actor(@parameters[0])
Audio.me_play("Audio/ME/"+"015-Mystery01",100,100)
$am = "#{$game_actors[@parameters[0]].name}离开队伍!"
bluefool_sort
end
end
# 继续
return true
end
#-------------------------
end
#==============================================================================
# ■ Window_Down
#------------------------------------------------------------------------------
# 　信息窗口。
#==============================================================================
class Window_Down < Window_Selectable
#--------------------------------------------------------------------------
# ● 初始化对像
#--------------------------------------------------------------------------
def initialize
super(0, 240, 330, 240)
@column_max = 1
self.opacity = 0
if $a != nil and $a.size < 21
self.index = $a.size/2
elsif $a != nil and $a.size > 20
self.index = 9
end
refresh
self.active = false
end
#--------------------------------------------------------------------------
# ● 刷新
#--------------------------------------------------------------------------
def refresh
if self.contents != nil
self.contents.dispose
self.contents = nil
end
if $a != nil and $a.size < Blue::Blue_max + 1
@item_max = $a.size
elsif $a != nil and $a.size > Blue::Blue_max
@item_max = Blue::Blue_max
end
if @item_max > 0
self.contents = Bitmap.new(width - 32, row_max * 16)
for i in 0...@item_max
draw_item(i)
end
end
end
def item_max
return @item_max
end
#--------------------------------------------------------------------------
# ● 描绘项目
# index : 项目编号
#--------------------------------------------------------------------------
def draw_item(index)
if $a.size < Blue::Blue_max + 1
item = $a[index]
else
item = $a[index + $a.size - Blue::Blue_max]
end
x = 0
y = index * 16
self.contents.font.size = 14
self.contents.font.color = Color.new(-170,-170,-170,255)
self.contents.draw_text(x + 6, y + 1, self.contents.text_size(item).width, 16, item, 0)
self.contents.font.color = normal_color
self.contents.draw_text(x + 5, y, self.contents.text_size(item).width, 16, item, 0)
end
#--------------------------------------
# ● 刷新光标
#--------------------------------------
def update_cursor_rect
# 光标位置不满 0 的情况下
if @index < 0
self.cursor_rect.empty
return
end
# 获取当前的行
row = @index / @column_max
# 当前行被显示开头行前面的情况下
if row < self.top_row
# 从当前行向开头行滚动
self.top_row = row
end
# 当前行被显示末尾行之后的情况下
if row > self.top_row + (self.page_row_max - 1)
# 从当前行向末尾滚动
self.top_row = row - (self.page_row_max - 1)
end
# 计算光标的宽
cursor_width = self.width / @column_max - 32
cursor_width = 0
# 计算光标坐标
x = @index % @column_max * (cursor_width + 32)
y = @index / @column_max * 32 - self.oy
# 更新国标矩形
self.cursor_rect.set(x, y, cursor_width, 16)
end
end

复制代码

这是即时消息……

冰枫o鲍辰 · 发表于 2015-1-12 23:47:15

帐号		自动登录	找回密码
密码			注册会员

[已经过期] 求大神帮我看看我的两个脚本哪里出现问题了

加入我们，或者，欢迎回来。

浏览过的版块