仓库和烛光系统冲突求解决方案

奶茶灬点点 · 发表于 2012-1-8 05:23:31

#==============================================================================
#
# 仓库ver1.1
#
# 汉化 by 约束
#
# RPG中存放多余物品的仓库。
# 本脚本与黑狮子的脚本相似
# 参考于MQ0_PartyReserve所做。
#
# 使用方法
# 事件中的「脚本」里填入reserve_system即可启动此脚本。
#
# 不可存放物品
# ・不想可以存放事件/剧情所需物品时
# 在物品的备注栏中填入非存放即可
# 如此即可使物品不可存入仓库。
#
# 另外、为能使用TYPE74RX-T様的「限定特定物平的所持数上限」脚本
# 而写了专门应对的方法
# 如果有用到以上所述脚本、请使RX_T_ITEM为true状态
#
#==============================================================================
module BBL_RESERVE_SYSTEM
#==============================================================================
# 设定项目开始
#==============================================================================
# 如果不希望保管物品根据以下范畴区分的情况时请填入false
ITEM_DISCRETION = true
# ITEM_DISCRETION在true的状态时请在以下填入范畴名
# 从左开始依次为物品、武器、防具、金钱(顺序不可改变)
# ※如果不希望有金钱保管功能时将金钱从范畴内消去
# 例)　["物品", "武器", "防具"]
DISCRETION_NAME = ["物品", "武器", "防具", "金钱"]
# 操作说明文
# 如果不需要时、消除""内文字即可
COMMAND_EXPLANATION = "空格：分别存入Ｄ：全部存入"
# 使用仓库时的按键
RESERVE_KEY = Input::C # 分别存入
RESERVE_ALL_KEY = Input::Z # 全部存入
# 金钱选项窗口的用语
# 从左开始依次为保存和提取
GOLD_COMMAND_NAME = ["保存", "提取"]
# 所持金钱的用语
GOLD_NAME = "持有金额"
# 保存金钱的用语
RESERVE_GOLD_NAME = "保管金额"
# 使用了TYPE74RX-T様的「限定特定物平的所持数上限」脚本
# 请在以下改为true即可
RX_T_ITEM = false
#==============================================================================
# 设定项目完毕
#==============================================================================
end
$imported = {} if $imported == nil
class Game_Party
alias bbl_initialize initialize
#--------------------------------------------------------------------------
# ○ 定义实例变量 (追加定义)
#--------------------------------------------------------------------------
attr_reader :keep_gold # 保存金钱
#--------------------------------------------------------------------------
# ● 初期化对象
#--------------------------------------------------------------------------
def initialize
bbl_initialize
@keep_items = {} # 保管品 hash (物品 ID)
@keep_weapons = {} # 保管品 hash (武器 ID)
@keep_armors = {} # 保管品 hash (防具 ID)
@keep_gold = 0 # 保管金钱
end
#--------------------------------------------------------------------------
# ○ 获取保存物品的排序
#--------------------------------------------------------------------------
def keeping_items
result = []
for i in @keep_items.keys.sort
result.push($data_items[i]) if @keep_items[i] > 0
end
for i in @keep_weapons.keys.sort
result.push($data_weapons[i]) if @keep_weapons[i] > 0
end
for i in @keep_armors.keys.sort
result.push($data_armors[i]) if @keep_armors[i] > 0
end
return result
end
#--------------------------------------------------------------------------
# ○ 获取保存物品的所持数量
#--------------------------------------------------------------------------
def keeping_item_number(item)
case item
when RPG::Item
number = @keep_items[item.id]
when RPG::Weapon
number = @keep_weapons[item.id]
when RPG::Armor
number = @keep_armors[item.id]
end
return number == nil ? 0 : number
end
#--------------------------------------------------------------------------
# ○ 保存物品的增加 (减少)
# item : 物品
# n : 个数
#--------------------------------------------------------------------------
def gain_keeping_item(item, n)
number = keeping_item_number(item)
case item
when RPG::Item
@keep_items[item.id] = [[number + n, 0].max, 99].min
when RPG::Weapon
@keep_weapons[item.id] = [[number + n, 0].max, 99].min
when RPG::Armor
@keep_armors[item.id] = [[number + n, 0].max, 99].min
end
end
#--------------------------------------------------------------------------
# ○ 保存物品的减少
# item : 物品
# n : 个数
#--------------------------------------------------------------------------
def lose_keeping_item(item, n)
gain_keeping_item(item, -n)
end
#--------------------------------------------------------------------------
# ● 保管金额的增加 (减少)
# n : 金额
#--------------------------------------------------------------------------
def gain_keeping_gold(n)
@keep_gold = [[@keep_gold + n, 0].max, 9999999].min
end
#--------------------------------------------------------------------------
# ● 保管金额的减少
# n : 金额
#--------------------------------------------------------------------------
def lose_keeping_gold(n)
gain_keeping_gold(-n)
end
end
#==============================================================================
# ■ Game_Interpreter
#==============================================================================
class Game_Interpreter
#--------------------------------------------------------------------------
# ● 呼出仓库
#--------------------------------------------------------------------------
def reserve_system
$scene = Scene_Reserve.new
return true
end
end
class Scene_Reserve < Scene_Base
#--------------------------------------------------------------------------
# ● 开始处理
#--------------------------------------------------------------------------
def start
super
create_menu_background
@not_gold = true if BBL_RESERVE_SYSTEM::DISCRETION_NAME.size < 4
if BBL_RESERVE_SYSTEM::ITEM_DISCRETION
@item_window = Window_Reserve_main.new(0, 112, 272, 248)
@reserve_window = Window_Reserve.new(272, 112, 272, 248)
else
@item_window = Window_Reserve_main.new(0, 56, 272, 304)
@reserve_window = Window_Reserve.new(272, 56, 272, 304)
end
@help_window = Window_Help.new
@item_window.help_window = @help_window
@reserve_window.help_window = @help_window
@command_window = Window_ReserveCommand.new(544, BBL_RESERVE_SYSTEM::DISCRETION_NAME,
BBL_RESERVE_SYSTEM::DISCRETION_NAME.size, 1, 4)
@command_window.y = 56
@command_window.active = true
@gold_command_window = Window_ReserveCommand.new(192, BBL_RESERVE_SYSTEM::GOLD_COMMAND_NAME, 1, 0)
@gold_command_window.opacity = 0
@gold_command_window.x = 32
@gold_command_window.y = @item_window.y + 64
@gold_command_window.visible = false
@item_window.active = false
@reserve_window.active = false
@item_window.index = -1
@reserve_window.index = -1
@item_cursor = 0
@reserve_cursor = 0
@item_window.mode = 1
@reserve_window.mode = 1
@number_window = Window_GoldInput.new
@number_window.visible = false
@number_window.y = @gold_command_window.y + @gold_command_window.height
@gold_window = Window_HandGold.new(0, 416 - 56)
@gold_reserve_window = Window_ReserveGold.new(272, 416 - 56)
unless BBL_RESERVE_SYSTEM::ITEM_DISCRETION
@command_window.active = false
@command_window.visible = false
@item_window.index = 0
@item_window.active
end
if $imported["HelpExtension"]
adjust_window_size
else
adjust_gold_window_size
end
end
#--------------------------------------------------------------------------
# ● 完毕处理
#--------------------------------------------------------------------------
def terminate
super
dispose_menu_background
@item_window.dispose
@reserve_window.dispose
@command_window.dispose
@help_window.dispose
@gold_command_window.dispose
@gold_window.dispose
@gold_reserve_window.dispose
@number_window.dispose
end
#--------------------------------------------------------------------------
# ● 刷新画面
#--------------------------------------------------------------------------
def update
super
update_menu_background
@command_window.update if BBL_RESERVE_SYSTEM::ITEM_DISCRETION
if @item_window.index >= 0
@item_window.active = true
@reserve_window.active = false
elsif @reserve_window.index >= 0
@item_window.active = false
@reserve_window.active = true
end
if @command_window.active == true
command_selection
elsif @item_window.active == true
select_item
elsif @reserve_window.active == true
select_keeping_item
elsif @gold_command_window.active == true
select_gold_command
elsif @number_window.active == true
select_number
end
item_mode = @command_window.index + 1
if item_mode != @item_window.mode
@item_window.mode = item_mode
end
if item_mode != @reserve_window.mode
@reserve_window.mode = item_mode
end
end
#--------------------------------------------------------------------------
# ● 指令窗口选项的刷新
#--------------------------------------------------------------------------
def command_selection
@help_window.set_text(BBL_RESERVE_SYSTEM::COMMAND_EXPLANATION)
if Input.trigger?(Input::C)
if @command_window.index == 3
Sound.play_decision
@command_window.active = false
@gold_command_window.visible = true
@gold_command_window.active = true
@gold_command_window.index = 0
else
Sound.play_decision
@command_window.active = false
@item_window.active = true
@item_window.index = 0
end
elsif Input.trigger?(Input::B)
Sound.play_cancel
$scene = Scene_Map.new
end
end
#--------------------------------------------------------------------------
# ● 所持物品选项的刷新
#--------------------------------------------------------------------------
def select_item
@item_window.update
@reserve_window.update
if Input.repeat?(BBL_RESERVE_SYSTEM::RESERVE_KEY)
@item_window.gain_item
@item_window.refresh
@reserve_window.refresh
if @item_window.item == nil
@item_window.index -= 1 if @item_window.index > 0
end
elsif Input.repeat?(BBL_RESERVE_SYSTEM::RESERVE_ALL_KEY)
@item_window.gain_item_all
@item_window.refresh
@reserve_window.refresh
if @item_window.item == nil
@item_window.index -= 1 if @item_window.index > 0
end
elsif Input.trigger?(Input::B)
if BBL_RESERVE_SYSTEM::ITEM_DISCRETION
Sound.play_cancel
@item_window.active = false
@item_window.index = -1
@command_window.active = true
else
Sound.play_cancel
$scene = Scene_Map.new
end
elsif Input.trigger?(Input::RIGHT) or Input.trigger?(Input::LEFT)
Sound.play_cursor
@item_cursor = @item_window.index
@item_window.active = false
@reserve_window.active
@item_window.index = -1
@reserve_window.index = @reserve_cursor
end
end
#--------------------------------------------------------------------------
# ● 保管物品选项的刷新
#--------------------------------------------------------------------------
def select_keeping_item
@item_window.update
@reserve_window.update
if Input.repeat?(BBL_RESERVE_SYSTEM::RESERVE_KEY)
@reserve_window.reserve_item
@item_window.refresh
@reserve_window.refresh
if @reserve_window.item == nil
@reserve_window.index -= 1 if @reserve_window.index > 0
end
elsif Input.repeat?(BBL_RESERVE_SYSTEM::RESERVE_ALL_KEY)
@reserve_window.reserve_item_all
@item_window.refresh
@reserve_window.refresh
if @reserve_window.item == nil
@reserve_window.index -= 1 if @reserve_window.index > 0
end
elsif Input.trigger?(Input::B)
if BBL_RESERVE_SYSTEM::ITEM_DISCRETION
Sound.play_cancel
@reserve_window.active = false
@reserve_window.index = -1
@command_window.active = true
else
Sound.play_cancel
$scene = Scene_Map.new
end
elsif Input.trigger?(Input::RIGHT) or Input.trigger?(Input::LEFT)
Sound.play_cursor
@reserve_cursor = @reserve_window.index
@reserve_window.active = false
@item_window.active
@reserve_window.index = -1
@item_window.index = @item_cursor
end
end
#--------------------------------------------------------------------------
# ● 金钱指令窗口选项的刷新
#--------------------------------------------------------------------------
def select_gold_command
@gold_command_window.update
if Input.trigger?(Input::C)
Sound.play_decision
@gold_command_window.active = false
@gold_command_window.visible = false
@number_window.visible = true
@number_window.active = true
if @gold_command_window.index == 0
@number_window.mode = 0 # 存入
@number_window.x = 32
else
@number_window.mode = 1 # 提取
@number_window.x = 304
end
elsif Input.trigger?(Input::B)
Sound.play_cancel
@gold_command_window.active = false
@gold_command_window.visible = false
@command_window.active = true
end
end
#--------------------------------------------------------------------------
# ● 填写金额的刷新
#--------------------------------------------------------------------------
def select_number
@number_window.update
if Input.trigger?(Input::C)
if @number_window.mode == 0
if @number_window.number > $game_party.gold
Sound.play_buzzer
@number_window.number = $game_party.gold
else
Sound.play_decision
gold = @number_window.number
$game_party.lose_gold(gold)
$game_party.gain_keeping_gold(gold)
@number_window.number = 0
@gold_window.refresh
@gold_reserve_window.refresh
end
elsif @number_window.mode == 1
if @number_window.number > $game_party.keep_gold
Sound.play_buzzer
@number_window.number = $game_party.keep_gold
else
Sound.play_decision
gold = @number_window.number
$game_party.gain_gold(gold)
$game_party.lose_keeping_gold(gold)
@number_window.number = 0
@gold_window.refresh
@gold_reserve_window.refresh
end
end
elsif Input.trigger?(Input::B)
Sound.play_cancel
@number_window.visible = false
@number_window.active = false
@number_window.number = 0
@number_window.index = 6
@gold_command_window.visible = true
@gold_command_window.active = true
end
end
if $imported["HelpExtension"]
#--------------------------------------------------------------------------
# ● 调整窗口大小用于KGC的扩张帮助窗口
#--------------------------------------------------------------------------
def adjust_window_size
@help_window.row_max = KGC::HelpExtension::ROW_MAX
@command_window.y = @help_window.height
@item_window.y = @command_window.height + @help_window.height
@reserve_window.y = @command_window.height + @help_window.height
sy = @help_window.height + @command_window.height + @gold_window.height
sy = @help_window.height + @command_window.height if @not_gold
@item_window.height = 416 - sy
@reserve_window.height = 416 - sy
@gold_command_window.y = @item_window.y
if @not_gold
@gold_window.visible = false
@gold_reserve_window.visible = false
end
end
end
#--------------------------------------------------------------------------
# ● 调整窗口大小
#--------------------------------------------------------------------------
def adjust_gold_window_size
sy = @help_window.height + @command_window.height + @gold_window.height
sy = @help_window.height + @command_window.height if @not_gold
@item_window.height = 416 - sy
@reserve_window.height = 416 - sy
if @not_gold
@gold_window.visible = false
@gold_reserve_window.visible = false
end
end
end
#==============================================================================
# ■ Window_Reserve
#------------------------------------------------------------------------------
# 　显示仓库中物品一览
#==============================================================================
class Window_Reserve < Window_Selectable
#--------------------------------------------------------------------------
# ● 定义实例变量
#--------------------------------------------------------------------------
attr_reader :mode # 模式
#--------------------------------------------------------------------------
# ● 初期化对象
# x : 窗口的 X 坐标
# y : 窗口的 Y 坐标
# width : 窗口的宽度
# height : 窗口的高度
#--------------------------------------------------------------------------
def initialize(x, y, width, height)
super(x, y, width, height)
@column_max = 1
self.index = -1
@mode = 0
@total = 0
@value = 0
refresh
end
#--------------------------------------------------------------------------
# ● 获取物品
#--------------------------------------------------------------------------
def item
return @data[self.index]
end
#--------------------------------------------------------------------------
# ● 刷新
#--------------------------------------------------------------------------
def refresh
@data = []
for item in $game_party.keeping_items
next unless include?(item)
@data.push(item)
if item.is_a?(RPG::Item) and item.id == $game_party.last_item_id
self.index = @data.size - 1
end
end
@data.push(nil) if include?(nil)
@item_max = @data.size
create_contents
for i in 0...@item_max
draw_item(i)
end
end
#--------------------------------------------------------------------------
# ● 项目的描画
# index : 项目编号
#--------------------------------------------------------------------------
def draw_item(index)
rect = item_rect(index)
self.contents.clear_rect(rect)
item = @data[index]
if item != nil
number = $game_party.keeping_item_number(item)
enabled = enable?(item)
rect.width -= 4
draw_item_name(item, rect.x, rect.y, enabled)
self.contents.draw_text(rect, sprintf("%2d", number), 2)
self.contents.font.size = 14
rect.width -= 20
self.contents.draw_text(rect, "×", 2)
self.contents.font.size = 20
end
end
#--------------------------------------------------------------------------
# ● 刷新帮助文本
#--------------------------------------------------------------------------
def update_help
@help_window.set_text(item == nil ? "" : item.description)
end
#--------------------------------------------------------------------------
# ● 模式的设定
# mode : 新模式
#--------------------------------------------------------------------------
def mode=(mode)
if @mode != mode
@mode = mode
refresh
end
end
#--------------------------------------------------------------------------
# ● 物品在许可状态时是否显示
#--------------------------------------------------------------------------
def enable?(item)
if BBL_RESERVE_SYSTEM::RX_T_ITEM
rx_limit = RX_T.get_numeric_of_system_word_in_sys_str(item, "所持可能数")
if rx_limit > 0
if $game_party.item_number(item) == rx_limit
return false
end
end
end
if $game_party.item_number(item) == 99
return false
else
return true
end
end
#--------------------------------------------------------------------------
# ● 物品是否存在于名单
# item : 物品
#--------------------------------------------------------------------------
def include?(item)
if BBL_RESERVE_SYSTEM::ITEM_DISCRETION
case @mode
when 1 # 物品
return false unless item.is_a?(RPG::Item)
when 2 # 武器
return false unless item.is_a?(RPG::Weapon)
when 3 # 防具
return false unless item.is_a?(RPG::Armor)
when 4 # 金钱
return false
end
return true
else
return false if item == nil
if $game_temp.in_battle
return false unless item.is_a?(RPG::Item)
end
return true
end
end
#--------------------------------------------------------------------------
# ● 取出保管中物品
#--------------------------------------------------------------------------
def reserve_item
return if item == nil
if BBL_RESERVE_SYSTEM::RX_T_ITEM
rx_limit = RX_T.get_numeric_of_system_word_in_sys_str(item, "所持可能数")
end
return Sound.play_buzzer if $game_party.item_number(item) == 99
if rx_limit == 0
rx_limit = nil
end
if $game_party.item_number(item) == rx_limit
Sound.play_buzzer
else
Sound.play_use_item
$game_party.lose_keeping_item(item, 1)
$game_party.gain_item(item, 1)
end
end
#--------------------------------------------------------------------------
# ● 将保管中物品全部取出
#--------------------------------------------------------------------------
def reserve_item_all
return if item == nil
if BBL_RESERVE_SYSTEM::RX_T_ITEM
rx_limit = RX_T.get_numeric_of_system_word_in_sys_str(item, "所持可能数")
end
return Sound.play_buzzer if $game_party.item_number(item) == 99
if rx_limit == 0
rx_limit = nil
end
if $game_party.item_number(item) == rx_limit
Sound.play_buzzer
else
Sound.play_use_item
@total = $game_party.keeping_item_number(item) + $game_party.item_number(item)
if rx_limit != nil
if rx_limit > 0
if @total > rx_limit
@value = @total - rx_limit
end
end
else
if @total > 99
@value = @total - 99
end
end
$game_party.gain_item(item, $game_party.keeping_item_number(item))
$game_party.lose_keeping_item(item, $game_party.keeping_item_number(item))
$game_party.gain_keeping_item(item, @value)
@total = 0
@value = 0
end
end
end
#==============================================================================
# ■ Window_Reserve
#------------------------------------------------------------------------------
# 　显示仓库中所持物品一览
#==============================================================================
class Window_Reserve_main < Window_Selectable
#--------------------------------------------------------------------------
# ● 定义实例变量
#--------------------------------------------------------------------------
attr_reader :mode # 模式
#--------------------------------------------------------------------------
# ● 初期化对象
# x : 窗口的 X 坐标
# y : 窗口的 Y 坐标
# width : 窗口的宽度
# height : 窗口的高度
#--------------------------------------------------------------------------
def initialize(x, y, width, height)
super(x, y, width, height)
@column_max = 1
self.index = -1
@mode = 0
@total = 0
@value = 0
refresh
end
#--------------------------------------------------------------------------
# ● 物品的获取
#--------------------------------------------------------------------------
def item
return @data[self.index]
end
#--------------------------------------------------------------------------
# ● 刷新
#--------------------------------------------------------------------------
def refresh
@data = []
for item in $game_party.items
next unless include?(item)
@data.push(item)
if item.is_a?(RPG::Item) and item.id == $game_party.last_item_id
self.index = @data.size - 1
end
end
@data.push(nil) if include?(nil)
@item_max = @data.size
create_contents
for i in 0...@item_max
draw_item(i)
end
end
#--------------------------------------------------------------------------
# ● 项目的描画
# index : 项目编号
#--------------------------------------------------------------------------
def draw_item(index)
rect = item_rect(index)
self.contents.clear_rect(rect)
item = @data[index]
if item != nil
number = $game_party.item_number(item)
enabled = enable?(item)
rect.width -= 4
draw_item_name(item, rect.x, rect.y, enabled)
self.contents.draw_text(rect, sprintf("%2d", number), 2)
self.contents.font.size = 14
rect.width -= 20
self.contents.draw_text(rect, "×", 2)
self.contents.font.size = 20
end
end
#--------------------------------------------------------------------------
# ● 刷新帮助文本
#--------------------------------------------------------------------------
def update_help
@help_window.set_text(item == nil ? "" : item.description)
end
#--------------------------------------------------------------------------
# ● 模式的设定
# mode : 新模式
#--------------------------------------------------------------------------
def mode=(mode)
if @mode != mode
@mode = mode
refresh
end
end
#--------------------------------------------------------------------------
# ● 物品在许可状态时是否显示
#--------------------------------------------------------------------------
def enable?(item)
if $game_party.keeping_item_number(item) == 99
return false
else
return true
end
end
#--------------------------------------------------------------------------
# ○ 物品是否存在于名单
# item : 物品
#--------------------------------------------------------------------------
def include?(item)
if BBL_RESERVE_SYSTEM::ITEM_DISCRETION
case @mode
when 1 # 物品
return false unless item.is_a?(RPG::Item)
return false if item.note.include?("非存放")
when 2 # 武器
return false unless item.is_a?(RPG::Weapon)
return false if item.note.include?("非存放")
when 3 # 防具
return false unless item.is_a?(RPG::Armor)
return false if item.note.include?("非存放")
when 4 # 金钱
return false
end
return true
else
return false if item == nil
if $game_temp.in_battle
return false unless item.is_a?(RPG::Item)
end
return false if item.note.include?("非存放")
return true
end
end
#--------------------------------------------------------------------------
# ● 所持有物品的保存
#--------------------------------------------------------------------------
def gain_item
return if item == nil
if $game_party.keeping_item_number(item) == 99
Sound.play_buzzer
else
Sound.play_use_item
$game_party.gain_keeping_item(item, 1)
$game_party.lose_item(item, 1)
end
end
#--------------------------------------------------------------------------
# ● 所持有物品全部保存
#--------------------------------------------------------------------------
def gain_item_all
return if item == nil
if $game_party.keeping_item_number(item) == 99
Sound.play_buzzer
else
Sound.play_use_item
@total = $game_party.keeping_item_number(item) + $game_party.item_number(item)
if @total > 99
@value = @total - 99
end
$game_party.gain_keeping_item(item, $game_party.item_number(item))
$game_party.lose_item(item, $game_party.item_number(item))
$game_party.gain_item(item, @value)
@total = 0
@value = 0
end
end
end
#==============================================================================
# ■ Window_GoldInput
#------------------------------------------------------------------------------
# 用于填写所持金钱的窗口。
#==============================================================================
class Window_GoldInput < Window_Base
#--------------------------------------------------------------------------
# ● 定义实例变量
#--------------------------------------------------------------------------
attr_reader :mode # 模式
attr_accessor :index # 索引
#--------------------------------------------------------------------------
# ● 初期化对象
# digits_max : 行数
#--------------------------------------------------------------------------
def initialize
super(32, 208, 544, 64)
@number = 0
@digits_max = 7
@index = @digits_max - 1
@mode = 0
self.opacity = 0
self.active = false
self.z += 9999
refresh
update_cursor
end
#--------------------------------------------------------------------------
# ● 数值的获取
#--------------------------------------------------------------------------
def number
return @number
end
#--------------------------------------------------------------------------
# ● 模式的获取
# 0:保存 1:提取
#--------------------------------------------------------------------------
def mode=(mode)
@mode = mode
return @mode
end
#--------------------------------------------------------------------------
# ● 数值的设定
# number : 新数值
#--------------------------------------------------------------------------
def number=(number)
@number = [[number, 0].max, 10 ** @digits_max - 1].min
refresh
end
#--------------------------------------------------------------------------
# ● 行数的获取
#--------------------------------------------------------------------------
def digits_max
return @digits_max
end
#--------------------------------------------------------------------------
# ● 行数的设定
# digits_max : 新行数
#--------------------------------------------------------------------------
def digits_max=(digits_max)
@digits_max = digits_max
refresh
end
#--------------------------------------------------------------------------
# ● 光标向右移动
# wrap : 可以往复循环移动
#--------------------------------------------------------------------------
def cursor_right(wrap)
if @index < @digits_max - 1 or wrap
@index = (@index + 1) % @digits_max
end
end
#--------------------------------------------------------------------------
# ● 光标向左移动
# wrap : 可以往复循环移动
#--------------------------------------------------------------------------
def cursor_left(wrap)
if @index > 0 or wrap
@index = (@index + @digits_max - 1) % @digits_max
end
end
#--------------------------------------------------------------------------
# ● 刷新画面
#--------------------------------------------------------------------------
def update
super
if self.active
if Input.repeat?(Input::UP) or Input.repeat?(Input::DOWN)
Sound.play_cursor
place = 10 ** (@digits_max - 1 - @index)
n = @number / place % 10
@number -= n * place
n = (n + 1) % 10 if Input.repeat?(Input::UP)
n = (n + 9) % 10 if Input.repeat?(Input::DOWN)
@number += n * place
refresh
end
last_index = @index
if Input.repeat?(Input::RIGHT)
if @index == @digits_max - 1
Sound.play_cursor
if @mode == 0
if @number == $game_party.gold
@number = 0
else
@number = $game_party.gold
end
elsif @mode == 1
if @number == $game_party.keep_gold
@number = 0
else
@number = $game_party.keep_gold
end
end
refresh
else
cursor_right(Input.trigger?(Input::RIGHT))
end
end
if Input.repeat?(Input::LEFT)
if @index == 0
Sound.play_cursor
if @mode == 0
if @number == $game_party.gold
@number = 0
else
@number = $game_party.gold
end
elsif @mode == 1
if @number == $game_party.keep_gold
@number = 0
else
@number = $game_party.keep_gold
end
end
refresh
else
cursor_left(Input.trigger?(Input::LEFT))
end
end
if @index != last_index
Sound.play_cursor
end
update_cursor
end
end
#--------------------------------------------------------------------------
# ● 刷新
#--------------------------------------------------------------------------
def refresh
self.contents.clear
self.contents.font.color = normal_color
s = sprintf("%0*d", @digits_max, @number)
for i in 0...@digits_max
self.contents.draw_text(24 + i * 16, 0, 16, WLH, s[i,1], 1)
end
self.contents.font.color = system_color
self.contents.draw_text(24 + (i + 1) * 16, 0, 16, WLH, Vocab::gold)
end
#--------------------------------------------------------------------------
# ● 光标的刷新
#--------------------------------------------------------------------------
def update_cursor
self.cursor_rect.set(24 + @index * 16, 0, 16, WLH)
end
end
#==============================================================================
# ■ Window_ReserveGold
#------------------------------------------------------------------------------
# 　显示保存金额的窗口。
#==============================================================================
class Window_ReserveGold < Window_Base
#--------------------------------------------------------------------------
# ● 初期化对象
# x : 窗口的 X 坐标
# y : 窗口的 Y 坐标
#--------------------------------------------------------------------------
def initialize(x, y)
super(x, y, 272, WLH + 32)
refresh
end
#--------------------------------------------------------------------------
# ● 刷新
#--------------------------------------------------------------------------
def refresh
self.contents.clear
draw_currency_value($game_party.keep_gold, 104, 0, 120)
self.contents.font.color = system_color
self.contents.draw_text(16, 0, 120, WLH, BBL_RESERVE_SYSTEM::RESERVE_GOLD_NAME)
end
end
#==============================================================================
# ■ Window_HandGold
#------------------------------------------------------------------------------
# 　显示所持金额的窗口。
#==============================================================================
class Window_HandGold < Window_Base
#--------------------------------------------------------------------------
# ● 初期化对象
# x : 窗口的 X 坐标
# y : 窗口的 Y 坐标
#--------------------------------------------------------------------------
def initialize(x, y)
super(x, y, 272, WLH + 32)
refresh
end
#--------------------------------------------------------------------------
# ● 刷新
#--------------------------------------------------------------------------
def refresh
self.contents.clear
draw_currency_value($game_party.gold, 104, 0, 120)
self.contents.font.color = system_color
self.contents.draw_text(16, 0, 120, WLH, BBL_RESERVE_SYSTEM::GOLD_NAME)
end
end
#==============================================================================
# ■ Window_ReserveCommand
#------------------------------------------------------------------------------
# 　进行仓库指令选择的窗口。
#==============================================================================
class Window_ReserveCommand < Window_Selectable
#--------------------------------------------------------------------------
# ● 定义实例变量
#--------------------------------------------------------------------------
attr_reader :commands # 指令
#--------------------------------------------------------------------------
# ● 初期化对象
# width : 窗口的宽度
# commands : 指令字符串的排序
# column_max : 行数 (在2 以上时,横向选项)
# row_max : 列数 (0:切合指令个数)
# spacing : 项目横向排列时空白的部分
#--------------------------------------------------------------------------
def initialize(width, commands, column_max = 1, row_max = 0, spacing = 32)
if row_max == 0
row_max = (commands.size + column_max - 1) / column_max
end
super(0, 0, width, row_max * WLH + 32, spacing)
@commands = commands
@item_max = commands.size
@column_max = column_max
refresh
self.index = 0
end
#--------------------------------------------------------------------------
# ● 刷新
#--------------------------------------------------------------------------
def refresh
self.contents.clear
for i in 0...@item_max
draw_item(i)
end
end
#--------------------------------------------------------------------------
# ● 项目的描画
# index : 项目编号
# enabled : 有效标志。false 时会描绘为半透明状
#--------------------------------------------------------------------------
def draw_item(index, enabled = true)
rect = item_rect(index)
rect.x += 4
rect.width -= 8
self.contents.clear_rect(rect)
self.contents.font.color = normal_color
self.contents.font.color.alpha = enabled ? 255 : 128
self.contents.draw_text(rect, @commands[index], 1)
end
end

复制代码

烛光：↓

# 设置烛光种类数
CANDLE_NUMBER = 2
# 设置控制开关,不用的话设0
CANDLE_SWITCH = 10
#--------------------------------------------------------------------------
# ● 开启或关闭烛光
#--------------------------------------------------------------------------
def candlelight(on=true)
$candlelight_on = $game_switches[CANDLE_SWITCH] = on
if on
# 生成黑色画面
$black_rect = Sprite.new
$black_rect.bitmap = Bitmap.new(544, 416)
$black_rect.bitmap.fill_rect(0, 0, 544, 416, Color.new(255, 255, 255))
$black_rect.blend_type = 2
# 黑色透明度，决定黑暗的程度
$black_rect.opacity = 255
# 生成烛光
$candle_rect = Array.new(CANDLE_NUMBER+1).map{|sprite| sprite=Sprite.new}
#===============================================================================]
# 烛光在此设置
#===============================================================================
# 指定第一种烛光
$candle_rect[1].bitmap = Cache.picture("write1")
# 指定第二种烛光
$candle_rect[2].bitmap = Cache.picture("write2")
#===============================================================================
#===============================================================================
$candle_rect.each {|sprite|
if sprite.bitmap
sprite.visible = false
sprite.ox, sprite.oy = sprite.bitmap.width/2, sprite.bitmap.height/2
end}
else
# 释放黑色画面和所有烛光
$black_rect.dispose
$candle_rect.each {|sprite| sprite.dispose}
$game_lighterlist.clear
end
end
#--------------------------------------------------------------------------
# ● 设置有烛光的角色
# candle_index ：烛光编号
# object ：角色编号，可以为数字或是数字数组
#--------------------------------------------------------------------------
def candles(candle_index, object)
$game_lighterlist ||= []
$game_lighterlist[candle_index] ||= []
if object.is_a?(Integer)
$game_lighterlist[candle_index] << object
elsif object.is_a?(Array)
$game_lighterlist[candle_index] += object
end
# 移除重复的角色
$game_lighterlist[candle_index].uniq!
# 开启烛光功能
candlelight unless $candlelight_on
end
#--------------------------------------------------------------------------
# ● 初始化烛光
#--------------------------------------------------------------------------
def initialize_candle
for k in 1...$candle_rect.size
next unless $game_lighterlist[k]
for j in $game_lighterlist[k]
ch = j == 0 ? $game_player : $game_map.events[j]
$candle_rect[k].x = ch.screen_x
$candle_rect[k].y = ch.screen_y - 16
lsx = $candle_rect[k].x - $candle_rect[k].bitmap.width / 2
lsy = $candle_rect[k].y - $candle_rect[k].bitmap.height / 2
$black_rect.bitmap.blt(lsx, lsy, $candle_rect[k].bitmap, $black_rect.bitmap.rect)
end
end
end
#--------------------------------------------------------------------------
# ● 更新烛光
#--------------------------------------------------------------------------
def update_candle
if $game_lighterlist != []
light = []
$game_lighterlist.each{|i| light+=i if i}
light.each do |i|
ch = i == 0 ? $game_player : $game_map.events[i]
unless ch.moving_judge?
$black_rect.bitmap.fill_rect(0, 0, 544, 416, Color.new(200, 200, 200))
initialize_candle
end
break
end
end
end
class Game_Character
#--------------------------------------------------------------------------
# ● 判断移动
#--------------------------------------------------------------------------
def moving_judge?
return (!stopping? or (@pattern != @original_pattern))
end
end
class Game_Map
#--------------------------------------------------------------------------
# ● 刷新烛光
#--------------------------------------------------------------------------
alias update_candle_system update
def update
if $candlelight_on
update_candle
$candlelight_on = false unless $game_switches[CANDLE_SWITCH]
candlelight(false) unless $candlelight_on
end
update_candle_system
end
end
class Scene_Map < Scene_Base
#--------------------------------------------------------------------------
# ● 生成烛光
#--------------------------------------------------------------------------
alias candle_system_start start
def start
candle_system_start
candlelight if $candlelight_on
initialize_candle if $candlelight_on

复制代码

请问这是怎么了？

帐号		自动登录	找回密码
密码			注册会员

[已经过期] 仓库和烛光系统冲突 求解决方案

[已经过期] 仓库和烛光系统冲突求解决方案