如何用联机脚本判定1P2P

1262917464 · 发表于 2015-11-11 13:00:49

加入我们，或者，欢迎回来。

您需要登录才可以下载或查看，没有帐号？注册会员

x

本帖最后由 1262917464 于 2015-11-11 18:32 编辑

{:2_276:}拿到这个脚本后正在疑惑如何判定1P2PQAQ

用 $RMlinkSZK.np == * 注：*是指第几个玩家，如1P *=1

#==============================================================================
# ■ RMlinkSZK v2.1
#------------------------------------------------------------------------------
# 　RPG MKAER聯機腳本。支持RMXP、RMVX、RMVA（注意：在VA裏不能用事件的按下按鈕，
# VA中必須用腳本判斷按鈕。）
# 　　將本腳本插入到Main之前，若為RMXP請在所有腳本之前插入Hangup 异常根除
# 腳本，否則將可能導致“脚本已备份”的錯誤。
# 　　獲取2P的按鍵輸入請传递np，例：檢測2P的C鍵位Input.press?(Input::C，2)
# 　　獲取2P的方向輸入請傳遞np，例：檢測2P的C鍵位Input.dir4(2)，同樣支持dir8
# 　　獲取當前玩家是1P還是2P，例：$RMlinkSZK.np
# 　　獲取當前遊戲人數，例：$RMlinkSZK.mnp
# 在Game.ini中加入MaxNP=最多聯機人數，可以允許最多4P聯機。
# 　　同時獲取任意一方的按鍵就传递0，例:Input.press?(num，0)
# 交換身體請調用$RMlinkSZK.change_play
# 判斷除方向鍵外任意鍵位是否被按下，例：Input.anykey?(np)或前一幀Input.anykey_?(np)
#==============================================================================
srand(368541734)#請不要在本脚本外調用srand否則將不同步！
module Input
def Input.update()
$RMlinkSZK.update()
end
def Input.press?(num,np = 0)
if np == 0
for i in 1..$RMlinkSZK.mnp
return true if $RMlinkSZK.press?(num,i) != 0
end
end
return $RMlinkSZK.press?(num,np) != 0
end
def Input.trigger?(num,np = 0)
if np == 0
for i in 1..$RMlinkSZK.mnp
return true if $RMlinkSZK.trigger?(num,i)
end
end
return $RMlinkSZK.trigger?(num,np)
end
def Input.repeat?(num,np = 0)
if np == 0
for i in 1..$RMlinkSZK.mnp
return true if $RMlinkSZK.repeat?(num,i)
end
end
return $RMlinkSZK.repeat?(num,np)
end
def Input.dir4(np = 1)
if np == 0
for i in 1..$RMlinkSZK.mnp
s = $RMlinkSZK.dir4(i)
return $RMlinkSZK.dir4(i) if s != 0
end
end
return $RMlinkSZK.dir4(np)
end
def Input.dir8(np = 1)
if np == 0
for i in 1..$RMlinkSZK.mnp
s = $RMlinkSZK.dir8(i)
return $RMlinkSZK.dir8(i) if s != 0
end
end
return $RMlinkSZK.dir8(np)
end
def Input.anykey?(np = 0)
return $RMlinkSZK.anykey?($RMlinkSZK.key,np)
end
def Input.anykey_?(np = 0)
return $RMlinkSZK.anykey?($RMlinkSZK.key_,np)
end
end
class RMlinkSZK
UP = 0
LEFT = 0
DOWN = 65535
RIGHT = 65535
NODIR = 32511
TONGSHI = 32767
attr_accessor :np
attr_accessor :mnp
attr_accessor :exchange
attr_accessor :key
attr_accessor :key_
attr_accessor :dk
attr_accessor :dk_
#--------------------------------------------------------------------------
# ● 初始化
#--------------------------------------------------------------------------
def initialize
linkdll = "\0" * 260 * 2
@gpps = Win32API.new("kernel32.dll","GetPrivateProfileStringA","p p p p l p","l")
@gpps.call("Core","MainPath","",linkdll,linkdll.size,".\\NO$GBAlinkSZK.ini")
linkdll=linkdll[0,linkdll.index("\000")] + "NO$GBA_SZK.dll"
@ud = Win32API.new(linkdll,"RM_Update",[],"v")
@gk = Win32API.new(linkdll,"RM_GetKey",["l"],"l")
@gx = Win32API.new(linkdll,"RM_GetX",["l"],"l")
@gy = Win32API.new(linkdll,"RM_GetY",["l"],"l")
@gnp = Win32API.new(linkdll,"GetNP",[],"l")
@gmnp = Win32API.new(linkdll,"GetMaxNP",[],"l")
@gpn = Win32API.new(linkdll,"GetPlayerName",["l","p"],"l")
@gs = Win32API.new(linkdll,"GetSpeed",["l"],"l")
@skip_c = 0
@exchange = 0
@np = @gnp.call()
@mnp = @gmnp.call()
@key = [0,0,0,0]
@dir = [0,0,0,0]
@dir8 = [0,0,0,0]
@dk = [0,0,0,0]
@key_ = [0,0,0,0]
@dk_ = [0,0,0,0]
@seed = 386212
@set_seed = true
end
def change_play
@exchange += 1
@exchange = 0 if @exchange >= @mnp
@np = @np += 1
@np = 1 if @np > @mnp
end
def update
for i in 1..@mnp
@key_[i-1] = @key[i-1]
@dk_[i-1] = @dk[i-1]
end
@ud.call()
for i in 1..@mnp
z = @exchange + i
z = 1 if z > @mnp
z -= 1
@key[z] = @gk.call(i)
#dir
r = 0
g = 0
d = @gx.call(i)
if d != NODIR
if d == RIGHT
g |= 1
r = 6
else
if d == TONGSHI
g |= 2 | 1
else
g |= 2
end
r = 4
end
end
d = @gy.call(i)
if d != NODIR
if d == DOWN
g |= 4
r = 2
else
if d == TONGSHI
g |= 4 | 8
else
g |= 8
end
r = 8
end
end
@dir[z] = r
@dk[z] = g
end
@dir8[0] = -1
#第一次按C时重新设置一次种子从而解决每次启动随机函数都相同的问题
if @set_seed
@seed += 1
if Input.trigger?(Input::C,0)
@set_seed = false
srand(Input.trigger?(Input::C,1) ? @seed : -@seed)
end
end
end
def press?(num,np)
return case_key(num,@key,@dk,np)
end
def case_key(num,k,dk,np)
np -= 1
case num
when Input::C
return k[np] & 1
when Input::B
return k[np] & 2
when Input::A
return k[np] & 4
when Input::Z
return k[np] & 8
when Input::L
return k[np] & 16
when Input::R
return k[np] & 32
when Input::X
return k[np] & 64
when Input::Y
return k[np] & 128
when Input::RIGHT
return dk[np] & 1
when Input::LEFT
return dk[np] & 2
when Input::DOWN
return dk[np] & 4
when Input::UP
return dk[np] & 8
end
return 0
end
def trigger?(num,np)
return case_key(num,@key,@dk,np) != 0 && case_key(num,@key_,@dk_,np) == 0
end
def repeat?(num,np)
return case_key(num,@key,@dk,np) != 0 && case_key(num,@key_,@dk_,np) == 0
end
def anykey?(k,np)
for i in 1..@mnp
return true if k[i-1] != 0
end
return k[np-1] != 0
end
def dir4(np)
return @dir[np-1]
end
def get_dir8(np)
dk = @dk[np-1]
if dk & 1 != 0
if dk & 4 != 0
return 3
elsif dk & 8 != 0
return 9
end
return 6
end
if dk & 2 != 0
if dk & 4 != 0
return 1
elsif dk & 8 != 0
return 7
end
return 4
end
return 8 if dk & 8 != 0
return 2 if dk & 4 != 0
return 0
end
def dir8(np)
if @dir8[0] == -1
for i in 1..@mnp
@dir8[i-1] = get_dir8(i)
end
end
return @dir8[np-1]
end
def get_player_name(np)
text = "\0"*260
@gpn.call(np|128,text)
return text[0,text.index("\000")]
end
def skip?
if @skip_c >= @gs.call(20)
@skip_c = 0
return false
else
@skip_c+=1
return true
end
end
end
module DataManager
#--------------------------------------------------------------------------
# ● 存档文件的最大数
#--------------------------------------------------------------------------
def self.savefile_max
return 4
end
end
class << Graphics
alias_method :original_szk_update, :update unless method_defined? :original_szk_update
def update
original_szk_update unless $RMlinkSZK.skip?
end
end
$RMlinkSZK = RMlinkSZK.new

复制代码

1262917464 · 发表于 2015-11-11 17:54:12

w1023909201 发表于 2015-11-11 13:53
能联机？

{:2_276:}是可以联机的，问题是我要知道怎么让RM知道1P是1P，2P是2P

w1023909201 · 发表于 2015-11-11 13:53:25

能联机？

帐号		自动登录	找回密码
密码			注册会员

[已经解决] 如何用联机脚本判定1P2P

加入我们，或者，欢迎回来。

点评

开拓者