【不是创意的创意】关于图标选项菜单和逃跑选项的整合...

精灵使者 · 发表于 2007-4-2 17:38:19

加入我们，或者，欢迎回来。

您需要登录才可以下载或查看，没有帐号？注册会员

x

本帖最后由精灵使者于 2014-12-20 20:52 编辑

首先按照取消战斗、逃跑的办法取消战斗、逃跑项
在Scene_Battle 2选项里面修改
# 有效化同伴指令窗口
@party_command_window.active = false
@party_command_window.visible = false
然后再把第62行后面的
def update_phase 2
后面的东西全部注释掉，留下start_phase3一项，即改成这样：
  #--------------------------------------------------------------------------
  # ● 刷新画面 (同伴命令回合)
  #--------------------------------------------------------------------------
  def update_phase2
# 按下 C 键的情况下
#if Input.trigger?(Input::C)
   # 同伴指令窗口光标位置分支
   #case @party_command_window.index
   # when 0  # 战斗
      # 演奏确定 SE
      #$game_system.se_play($data_system.decision_se)
      # 开始角色的命令回合
      start_phase3
   #when 1  # 逃跑
      # 不能逃跑的情况下
      #if $game_temp.battle_can_escape == false
      # 演奏冻结 SE
      #$game_system.se_play($data_system.buzzer_se)
      #return
      #end
      # 演奏确定 SE
      #$game_system.se_play($data_system.decision_se)
      # 逃走处理
      #update_phase2_escape
   #end
   #return
#end
  end
留下带彩色的一项。
然后在Scene_battle 1 的第30行修改为……

@actor_command_window = Window_Command.new(160, [s1, s2, s3, s4,"逃跑"])
@actor_command_window.y = 128

然后在Scene_battle 3里面修改这项
#--------------------------------------------------------------------------
  # ● 刷新画面 (角色命令回合 : 基本命令)
  #--------------------------------------------------------------------------
def update_phase3_basic_command
# 按下 B 键的情况下
if Input.trigger?(Input::B)
   # 演奏取消 SE
   $game_system.se_play($data_system.cancel_se)
   # 转向前一个角色的指令输入
   phase3_prior_actor
   return
end
# 按下 C 键的情况下
if Input.trigger?(Input::C)
   # 角色指令窗口光标位置分之
   case @actor_command_window.index
   when 0  # 攻击
      # 演奏确定 SE
      $game_system.se_play($data_system.decision_se)
      # 设置行动
      @active_battler.current_action.kind = 0
      @active_battler.current_action.basic = 0
      # 开始选择敌人
      start_enemy_select
   when 1  # 特技
      # 演奏确定 SE
      $game_system.se_play($data_system.decision_se)
      # 设置行动
      @active_battler.current_action.kind = 1
      # 开始选择特技
      start_skill_select
   when 2  # 防御
      # 演奏确定 SE
      $game_system.se_play($data_system.decision_se)
      # 设置行动
      @active_battler.current_action.kind = 0
      @active_battler.current_action.basic = 1
      # 转向下一位角色的指令输入
      phase3_next_actor
   when 3  # 物品
      # 演奏确定 SE
      $game_system.se_play($data_system.decision_se)
      # 设置行动
      @active_battler.current_action.kind = 2
      # 开始选择物品
      start_item_select
  ###########################################################################
   when 4  # 逃跑
      if $game_temp.battle_can_escape == false
      # 演奏冻结 SE
      $game_system.se_play($data_system.buzzer_se)
      return
      end
      # 演奏确定 SE
      $game_system.se_play($data_system.decision_se)
      # 逃走处理
      update_phase2_escape
###########################################################################
   end
   return
end
end
到这里还不算完，真正的目的在后边。如果你选用了图标选项菜单的话，请用这个脚本替换main前面原来的脚本。

#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================
module Momo_IconCommand
# 图标名称设定
ATTACK_ICON_NAME = "001-Weapon01" # 攻撃
SKILL_ICON_NAME = "044-Skill01" # 特技
GUARD_ICON_NAME = "009-Shield01" # 防御
ITEM_ICON_NAME = "032-Item01" # 物品
ESCAPE_ICON_NAME = "020-Accessory05" # 逃跑
# X坐标修正
X_PLUS = -50
# Y坐标修正
Y_PLUS = -180
# 选择时图标的动作
# 0:静止 1:放大
SELECT_TYPE = 1
# 闪烁时光芒的颜色
FLASH_COLOR = Color.new(255, 255, 255, 128)
# 闪烁时间
FLASH_DURATION = 10
# 闪烁间隔
FLASH_INTERVAL = 20
# 是否写出文字的名称
COM_NAME_DROW = true
# 文字名称是否移动
COM_NAME_MOVE = true
# 文字内容
ATTACK_NAME = "攻击" # 攻击
SKILL_NAME = "魔法" # 特技
GUARD_NAME = "防御" # 防御
ITEM_NAME = "物品" # 物品
ESCAPE_NAME = "逃跑" # 逃跑
# 文字颜色
COM_NAME_COLOR = Color.new(255, 255, 255, 255)
# 文字坐标修正
COM_NAME_X_PLUS = 0
COM_NAME_Y_PLUS = -15
end
class Window_CommandIcon < Window_Selectable
attr_accessor :last_index
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(x, y, commands)
super(x, y, 32, 32)
# ウィンドウスキンに空文字列を指定してウィンドウを描画しないようにする
self.windowskin = RPG::Cache.windowskin("")
@item_max = commands.size
@commands = commands
@column_max = commands.size
@index = 0
@last_index = nil
@name_sprite = nil
@sprite = []
refresh
end
def dispose
super
for sprite in @sprite
sprite.dispose unless sprite.nil?
end
@name_sprite.dispose unless @name_sprite.nil?
end
#--------------------------------------------------------------------------
# ● リフレッシュ
#--------------------------------------------------------------------------
def refresh
@name_sprite.dispose unless @name_sprite.nil?
for sprite in @sprite
sprite.dispose unless sprite.nil?
end
@name_sprite = nil
draw_com_name if Momo_IconCommand::COM_NAME_DROW
@sprite = []
for i in 0...@item_max
draw_item(i)
end
end
#--------------------------------------------------------------------------
# ● 項目の描画
#--------------------------------------------------------------------------
def draw_item(index)
@sprite[index] = Sprite_Icon.new(nil, @commands[index])
@sprite[index].z = self.z + 1
end
def draw_com_name
@name_sprite = Sprite_Comm_Name.new(nil, get_com_name)
end
# 更新
def update
super
icon_update
com_name_update if Momo_IconCommand::COM_NAME_DROW
if move_index?
@last_index = self.index
end
end
# アイコンの更新
def icon_update
for i in [email protected]
@sprite[i].active = (self.index == i)
@sprite[i].x = self.x + i * 24
@sprite[i].y = self.y + 0
@sprite[i].z = (self.index == i) ? self.z + 2 : self.z + 1
@sprite[i].visible = self.visible
@sprite[i].update
end
end
# コマンドネームの更新
def com_name_update
if move_index?
@name_sprite.name = get_com_name
end
@name_sprite.x = self.x - 12 + Momo_IconCommand::COM_NAME_X_PLUS
@name_sprite.y = self.y - 40 + Momo_IconCommand::COM_NAME_Y_PLUS
@name_sprite.z = self.z + 1
@name_sprite.active = self.active
@name_sprite.visible = self.visible
@name_sprite.update
end
def get_com_name
make_name_set if @name_set.nil?
name = @name_set[self.index]
name = "" if name.nil?
return name
end
def make_name_set
@name_set = []
@name_set[0] = Momo_IconCommand::ATTACK_NAME
@name_set[1] = Momo_IconCommand::SKILL_NAME
@name_set[2] = Momo_IconCommand::GUARD_NAME
@name_set[3] = Momo_IconCommand::ITEM_NAME
@name_set[4] = Momo_IconCommand::ESCAPE_NAME
end
def move_index?
return self.index != @last_index
end
def need_reset
@name_sprite.need_reset = true if Momo_IconCommand::COM_NAME_DROW
end
end
# アイコン用スプライト
class Sprite_Icon < Sprite
attr_accessor :active
attr_accessor :icon_name
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(viewport, icon_name)
super(viewport)
@icon_name = icon_name
@last_icon = @icon_name
@count = 0
self.bitmap = RPG::Cache.icon(@icon_name)
self.ox = self.bitmap.width / 2
self.oy = self.bitmap.height / 2
@active = false
end
#--------------------------------------------------------------------------
# ● 解放
#--------------------------------------------------------------------------
def dispose
if self.bitmap != nil
self.bitmap.dispose
end
super
end
#--------------------------------------------------------------------------
# ● フレーム更新
#--------------------------------------------------------------------------
def update
super
if @icon_name != @last_icon
@last_icon = @icon_name
self.bitmap = RPG::Cache.icon(@icon_name)
end
if @active
@count += 1
case Momo_IconCommand::SELECT_TYPE
when 0
icon_flash
when 1
icon_zoom
end
@count = 0 if @count == 20
else
icon_reset
end
end
def icon_flash
if @count % Momo_IconCommand::FLASH_INTERVAL == 0 or @count == 1
self.flash(Momo_IconCommand::FLASH_COLOR, Momo_IconCommand::FLASH_DURATION)
end
end
def icon_zoom
case @count
when 1..10
zoom = 1.0 + @count / 10.0
when 11..20
zoom = 2.0 - (@count - 10) / 10.0
end
self.zoom_x = zoom
self.zoom_y = zoom
end
def icon_reset
@count = 0
self.zoom_x = 1.0
self.zoom_y = 1.0
end
end
# コマンドネーム用スプライト
class Sprite_Comm_Name < Sprite
attr_accessor :active
attr_accessor :name
attr_accessor :need_reset
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(viewport, name)
super(viewport)
@name = name
@last_name = nil
@count = 0
@x_plus = 0
@opa_plus = 0
@need_reset = false
@active = false
self.bitmap = Bitmap.new(160, 32)
end
#--------------------------------------------------------------------------
# ● 解放
#--------------------------------------------------------------------------
def dispose
if self.bitmap != nil
self.bitmap.dispose
end
super
end
#--------------------------------------------------------------------------
# ● フレーム更新
#--------------------------------------------------------------------------
def update
super
if @active
if need_reset?
@need_reset = false
@last_name = @name
text_reset
end
move_text if Momo_IconCommand::COM_NAME_MOVE
end
end
def move_text
@count += 1
@x_plus = [@count * 8, 80].min
self.x = self.x - 80 + @x_plus
self.opacity = @count * 25
end
def text_reset
@count = 0
@x_plus = 0
self.bitmap.clear
self.bitmap.font.color = Momo_IconCommand::COM_NAME_COLOR
self.bitmap.draw_text(0, 0, 160, 32, @name)
end
def need_reset?
return (@name != @last_name or @need_reset)
end
end
class Scene_Battle
#--------------------------------------------------------------------------
# ● プレバトルフェーズ開始
#--------------------------------------------------------------------------
alias scene_battle_icon_command_start_phase1 start_phase1
def start_phase1
com1 = Momo_IconCommand::ATTACK_ICON_NAME
com2 = Momo_IconCommand::SKILL_ICON_NAME
com3 = Momo_IconCommand::GUARD_ICON_NAME
com4 = Momo_IconCommand::ITEM_ICON_NAME
com5 = Momo_IconCommand::ESCAPE_ICON_NAME
@actor_command_window = Window_CommandIcon.new(0, 0, [com1, com2, com3, com4, com5])
@actor_command_window.y = 160
@actor_command_window.back_opacity = 160
@actor_command_window.active = false
@actor_command_window.visible = false
@actor_command_window.update
scene_battle_icon_command_start_phase1
end
#--------------------------------------------------------------------------
# ● アクターコマンドウィンドウのセットアップ
#--------------------------------------------------------------------------
alias scene_battle_icon_command_phase3_setup_command_window phase3_setup_command_window
def phase3_setup_command_window
scene_battle_icon_command_phase3_setup_command_window
# アクターコマンドウィンドウの位置を設定
@actor_command_window.x = command_window_actor_x(@actor_index)
@actor_command_window.y = command_window_actor_y(@actor_index)
@actor_command_window.need_reset
end
def command_window_actor_x(index)
$game_party.actors[index].screen_x + Momo_IconCommand::X_PLUS
end
def command_window_actor_y(index)
$game_party.actors[index].screen_y + Momo_IconCommand::Y_PLUS
end
end
#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================

复制代码

最终截图如下：

效果很不错吧~
大家不会的话可以下载工程观摩下。
http://rpg.blue/upload_program/files/动态+逃跑.rar

精灵使者 · 发表于 2007-4-2 17:38:19

加入我们，或者，欢迎回来。

您需要登录才可以下载或查看，没有帐号？注册会员

x

首先按照取消战斗、逃跑的办法取消战斗、逃跑项
在Scene_Battle 2选项里面修改
# 有效化同伴指令窗口
@party_command_window.active = false
@party_command_window.visible = false
然后再把第62行后面的
def update_phase 2
后面的东西全部注释掉，留下start_phase3一项，即改成这样：
  #--------------------------------------------------------------------------
  # ● 刷新画面 (同伴命令回合)
  #--------------------------------------------------------------------------
  def update_phase2
# 按下 C 键的情况下
#if Input.trigger?(Input::C)
   # 同伴指令窗口光标位置分支
   #case @party_command_window.index
   # when 0  # 战斗
      # 演奏确定 SE
      #$game_system.se_play($data_system.decision_se)
      # 开始角色的命令回合
      start_phase3
   #when 1  # 逃跑
      # 不能逃跑的情况下
      #if $game_temp.battle_can_escape == false
      # 演奏冻结 SE
      #$game_system.se_play($data_system.buzzer_se)
      #return
      #end
      # 演奏确定 SE
      #$game_system.se_play($data_system.decision_se)
      # 逃走处理
      #update_phase2_escape
   #end
   #return
#end
  end
留下带彩色的一项。
然后在Scene_battle 1 的第30行修改为……

@actor_command_window = Window_Command.new(160, [s1, s2, s3, s4,"逃跑"])
@actor_command_window.y = 128

然后在Scene_battle 3里面修改这项
#--------------------------------------------------------------------------
  # ● 刷新画面 (角色命令回合 : 基本命令)
  #--------------------------------------------------------------------------
def update_phase3_basic_command
# 按下 B 键的情况下
if Input.trigger?(Input::B)
   # 演奏取消 SE
   $game_system.se_play($data_system.cancel_se)
   # 转向前一个角色的指令输入
   phase3_prior_actor
   return
end
# 按下 C 键的情况下
if Input.trigger?(Input::C)
   # 角色指令窗口光标位置分之
   case @actor_command_window.index
   when 0  # 攻击
      # 演奏确定 SE
      $game_system.se_play($data_system.decision_se)
      # 设置行动
      @active_battler.current_action.kind = 0
      @active_battler.current_action.basic = 0
      # 开始选择敌人
      start_enemy_select
   when 1  # 特技
      # 演奏确定 SE
      $game_system.se_play($data_system.decision_se)
      # 设置行动
      @active_battler.current_action.kind = 1
      # 开始选择特技
      start_skill_select
   when 2  # 防御
      # 演奏确定 SE
      $game_system.se_play($data_system.decision_se)
      # 设置行动
      @active_battler.current_action.kind = 0
      @active_battler.current_action.basic = 1
      # 转向下一位角色的指令输入
      phase3_next_actor
   when 3  # 物品
      # 演奏确定 SE
      $game_system.se_play($data_system.decision_se)
      # 设置行动
      @active_battler.current_action.kind = 2
      # 开始选择物品
      start_item_select
  ###########################################################################
   when 4  # 逃跑
      if $game_temp.battle_can_escape == false
      # 演奏冻结 SE
      $game_system.se_play($data_system.buzzer_se)
      return
      end
      # 演奏确定 SE
      $game_system.se_play($data_system.decision_se)
      # 逃走处理
      update_phase2_escape
###########################################################################
   end
   return
end
end
到这里还不算完，真正的目的在后边。如果你选用了图标选项菜单的话，请用这个脚本替换main前面原来的脚本。

#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================
module Momo_IconCommand
# 图标名称设定
ATTACK_ICON_NAME = "001-Weapon01" # 攻撃
SKILL_ICON_NAME = "044-Skill01" # 特技
GUARD_ICON_NAME = "009-Shield01" # 防御
ITEM_ICON_NAME = "032-Item01" # 物品
ESCAPE_ICON_NAME = "020-Accessory05" # 逃跑
# X坐标修正
X_PLUS = -50
# Y坐标修正
Y_PLUS = -180
# 选择时图标的动作
# 0:静止 1:放大
SELECT_TYPE = 1
# 闪烁时光芒的颜色
FLASH_COLOR = Color.new(255, 255, 255, 128)
# 闪烁时间
FLASH_DURATION = 10
# 闪烁间隔
FLASH_INTERVAL = 20
# 是否写出文字的名称
COM_NAME_DROW = true
# 文字名称是否移动
COM_NAME_MOVE = true
# 文字内容
ATTACK_NAME = "攻击" # 攻击
SKILL_NAME = "魔法" # 特技
GUARD_NAME = "防御" # 防御
ITEM_NAME = "物品" # 物品
ESCAPE_NAME = "逃跑" # 逃跑
# 文字颜色
COM_NAME_COLOR = Color.new(255, 255, 255, 255)
# 文字坐标修正
COM_NAME_X_PLUS = 0
COM_NAME_Y_PLUS = -15
end
class Window_CommandIcon < Window_Selectable
attr_accessor :last_index
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(x, y, commands)
super(x, y, 32, 32)
# ウィンドウスキンに空文字列を指定してウィンドウを描画しないようにする
self.windowskin = RPG::Cache.windowskin("")
@item_max = commands.size
@commands = commands
@column_max = commands.size
@index = 0
@last_index = nil
@name_sprite = nil
@sprite = []
refresh
end
def dispose
super
for sprite in @sprite
sprite.dispose unless sprite.nil?
end
@name_sprite.dispose unless @name_sprite.nil?
end
#--------------------------------------------------------------------------
# ● リフレッシュ
#--------------------------------------------------------------------------
def refresh
@name_sprite.dispose unless @name_sprite.nil?
for sprite in @sprite
sprite.dispose unless sprite.nil?
end
@name_sprite = nil
draw_com_name if Momo_IconCommand::COM_NAME_DROW
@sprite = []
for i in 0...@item_max
draw_item(i)
end
end
#--------------------------------------------------------------------------
# ● 項目の描画
#--------------------------------------------------------------------------
def draw_item(index)
@sprite[index] = Sprite_Icon.new(nil, @commands[index])
@sprite[index].z = self.z + 1
end
def draw_com_name
@name_sprite = Sprite_Comm_Name.new(nil, get_com_name)
end
# 更新
def update
super
icon_update
com_name_update if Momo_IconCommand::COM_NAME_DROW
if move_index?
@last_index = self.index
end
end
# アイコンの更新
def icon_update
for i in [email protected]
@sprite[i].active = (self.index == i)
@sprite[i].x = self.x + i * 24
@sprite[i].y = self.y + 0
@sprite[i].z = (self.index == i) ? self.z + 2 : self.z + 1
@sprite[i].visible = self.visible
@sprite[i].update
end
end
# コマンドネームの更新
def com_name_update
if move_index?
@name_sprite.name = get_com_name
end
@name_sprite.x = self.x - 12 + Momo_IconCommand::COM_NAME_X_PLUS
@name_sprite.y = self.y - 40 + Momo_IconCommand::COM_NAME_Y_PLUS
@name_sprite.z = self.z + 1
@name_sprite.active = self.active
@name_sprite.visible = self.visible
@name_sprite.update
end
def get_com_name
make_name_set if @name_set.nil?
name = @name_set[self.index]
name = "" if name.nil?
return name
end
def make_name_set
@name_set = []
@name_set[0] = Momo_IconCommand::ATTACK_NAME
@name_set[1] = Momo_IconCommand::SKILL_NAME
@name_set[2] = Momo_IconCommand::GUARD_NAME
@name_set[3] = Momo_IconCommand::ITEM_NAME
@name_set[4] = Momo_IconCommand::ESCAPE_NAME
end
def move_index?
return self.index != @last_index
end
def need_reset
@name_sprite.need_reset = true if Momo_IconCommand::COM_NAME_DROW
end
end
# アイコン用スプライト
class Sprite_Icon < Sprite
attr_accessor :active
attr_accessor :icon_name
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(viewport, icon_name)
super(viewport)
@icon_name = icon_name
@last_icon = @icon_name
@count = 0
self.bitmap = RPG::Cache.icon(@icon_name)
self.ox = self.bitmap.width / 2
self.oy = self.bitmap.height / 2
@active = false
end
#--------------------------------------------------------------------------
# ● 解放
#--------------------------------------------------------------------------
def dispose
if self.bitmap != nil
self.bitmap.dispose
end
super
end
#--------------------------------------------------------------------------
# ● フレーム更新
#--------------------------------------------------------------------------
def update
super
if @icon_name != @last_icon
@last_icon = @icon_name
self.bitmap = RPG::Cache.icon(@icon_name)
end
if @active
@count += 1
case Momo_IconCommand::SELECT_TYPE
when 0
icon_flash
when 1
icon_zoom
end
@count = 0 if @count == 20
else
icon_reset
end
end
def icon_flash
if @count % Momo_IconCommand::FLASH_INTERVAL == 0 or @count == 1
self.flash(Momo_IconCommand::FLASH_COLOR, Momo_IconCommand::FLASH_DURATION)
end
end
def icon_zoom
case @count
when 1..10
zoom = 1.0 + @count / 10.0
when 11..20
zoom = 2.0 - (@count - 10) / 10.0
end
self.zoom_x = zoom
self.zoom_y = zoom
end
def icon_reset
@count = 0
self.zoom_x = 1.0
self.zoom_y = 1.0
end
end
# コマンドネーム用スプライト
class Sprite_Comm_Name < Sprite
attr_accessor :active
attr_accessor :name
attr_accessor :need_reset
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(viewport, name)
super(viewport)
@name = name
@last_name = nil
@count = 0
@x_plus = 0
@opa_plus = 0
@need_reset = false
@active = false
self.bitmap = Bitmap.new(160, 32)
end
#--------------------------------------------------------------------------
# ● 解放
#--------------------------------------------------------------------------
def dispose
if self.bitmap != nil
self.bitmap.dispose
end
super
end
#--------------------------------------------------------------------------
# ● フレーム更新
#--------------------------------------------------------------------------
def update
super
if @active
if need_reset?
@need_reset = false
@last_name = @name
text_reset
end
move_text if Momo_IconCommand::COM_NAME_MOVE
end
end
def move_text
@count += 1
@x_plus = [@count * 8, 80].min
self.x = self.x - 80 + @x_plus
self.opacity = @count * 25
end
def text_reset
@count = 0
@x_plus = 0
self.bitmap.clear
self.bitmap.font.color = Momo_IconCommand::COM_NAME_COLOR
self.bitmap.draw_text(0, 0, 160, 32, @name)
end
def need_reset?
return (@name != @last_name or @need_reset)
end
end
class Scene_Battle
#--------------------------------------------------------------------------
# ● プレバトルフェーズ開始
#--------------------------------------------------------------------------
alias scene_battle_icon_command_start_phase1 start_phase1
def start_phase1
com1 = Momo_IconCommand::ATTACK_ICON_NAME
com2 = Momo_IconCommand::SKILL_ICON_NAME
com3 = Momo_IconCommand::GUARD_ICON_NAME
com4 = Momo_IconCommand::ITEM_ICON_NAME
com5 = Momo_IconCommand::ESCAPE_ICON_NAME
@actor_command_window = Window_CommandIcon.new(0, 0, [com1, com2, com3, com4, com5])
@actor_command_window.y = 160
@actor_command_window.back_opacity = 160
@actor_command_window.active = false
@actor_command_window.visible = false
@actor_command_window.update
scene_battle_icon_command_start_phase1
end
#--------------------------------------------------------------------------
# ● アクターコマンドウィンドウのセットアップ
#--------------------------------------------------------------------------
alias scene_battle_icon_command_phase3_setup_command_window phase3_setup_command_window
def phase3_setup_command_window
scene_battle_icon_command_phase3_setup_command_window
# アクターコマンドウィンドウの位置を設定
@actor_command_window.x = command_window_actor_x(@actor_index)
@actor_command_window.y = command_window_actor_y(@actor_index)
@actor_command_window.need_reset
end
def command_window_actor_x(index)
$game_party.actors[index].screen_x + Momo_IconCommand::X_PLUS
end
def command_window_actor_y(index)
$game_party.actors[index].screen_y + Momo_IconCommand::Y_PLUS
end
end
#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================

复制代码

最终截图如下：

效果很不错吧~
大家不会的话可以下载工程观摩下。
http://rpg.blue/upload_program/files/动态+逃跑.rar

童言童語 · 发表于 2007-4-3 01:21:52

提示: 作者被禁止或删除内容自动屏蔽

gpra8764 · 发表于 2007-4-3 02:04:43

提示: 作者被禁止或删除内容自动屏蔽

精灵使者 · 发表于 2007-4-3 05:35:27

攻击会是逃跑？我怎么没有发觉？
我的游戏里面用了这个脚本。经过测试，完全没问题。
P.S.这个脚本在使用之前要按照前面的地方修改，否则会出错，不要单一的复制粘贴
不好意思，我居然把这个关键的地方忘记了。顶楼已更新，请重新修改。
工程已经放出，你可以参照工程修改。

童言童語 · 发表于 2007-4-4 00:29:03

提示: 作者被禁止或删除内容自动屏蔽

魔剑美神 · 发表于 2007-4-4 19:51:14

不错~赞一个~

能不能把攻击.技能等这些字的透明度改高点?

或者换个颜色~因为和怪物重叠的时候有点看不清楚~

还有就是菜单要能有个框框也许会好看点…

小真·爱舞 · 发表于 2007-4-4 20:29:57

并不困难的效果来着……
实际上只需要扩充一下就可以了……

精灵使者 · 发表于 2007-4-4 20:33:43

以下引用魔剑美神于2007-4-4 11:51:14的发言：

不错~赞一个~

能不能把攻击.技能等这些字的透明度改高点?

或者换个颜色~因为和怪物重叠的时候有点看不清楚~

还有就是菜单要能有个框框也许会好看点…

这个脚本上有修改的地方。
# 文字颜色
COM_NAME_COLOR = Color.new(255, 255, 255, 255)

菜单有框的话修改这个部分
@actor_command_window.back_opacity = 160
@actor_command_window.active = false
@actor_command_window.visible = false

在我的游戏上是配合了字体阴影脚本，所以重合的现象就不存在了。

魔剑美神 · 发表于 2007-4-4 20:36:50

以下引用小真·爱舞于2007-4-4 12:29:57的发言：

并不困难的效果来着……
实际上只需要扩充一下就可以了……

做为新人来说还是应该鼓励一下的~~

帐号		自动登录	找回密码
密码			注册会员

[原创发布] 【不是创意的创意】关于图标选项菜单和逃跑选项的整合...

加入我们，或者，欢迎回来。

加入我们，或者，欢迎回来。

浏览过的版块

开拓者

贵宾