如何使用小地图脚本不一进入游戏就自动显示

精灵使者 发表于 2011-11-22 13:46:23

本帖最后由精灵使者于 2011-11-22 13:49 编辑

有的地方没有优化么……你还先用你的脚本吧……
看起来我还得优化配置（我的机器似乎能全速运行）
不过，设置一样
注意开关号，先预分配好相应的开关
尤其是关于事件的刷新开关……

module PLAN_Map_Window
WIN_WIDTH = 250 # 地图的宽度
WIN_HEIGHT = 200 # 地图的高度
ZOOM = 4.0 # 地图的放缩比例
WINDOWSKIN = "" # 自定义地图窗口素材，如果留空则是默认的
ON_OFF_KEY = Input::A # 打开地图的按钮，A就是键盘的Z键
SWITCH = 1 # 禁用地图功能的开关，默认这个就是打开100号
# 开关则禁止使用地图功能，关闭则可以使用地图功能
WINDOW_MOVE = true # 窗口中的地图跟随移动，(true:跟随, false:固定)
OPACITY = 255 # 窗口的透明度
C_OPACITY = 255 # 地图的透明度
VISIBLE = true # 最初是否可见(如果是事件标题请置false）
SWITCH_KEY = Input::L # Q键锁定/解锁小地图(可以用上下左右切换小地图的位置）
MAP_VISIBLE = 2 # 地图/地图名显示开关状态
MAP_SWITCH = 3 # 地图锁定开关状态
MAP_DIRECTION = 1 # 地图方向变量
MINI_MAP = [40,40] # 小地图和中地图范围
LARGE_MAP = [70,70] # 中地图和大地图范围
MINIMAP_ZOOM = 0.5 # 小地图相对于放缩比的比率
LARGEMAP_ZOOM = 1.5 # 大地图相对于放所比的比率
COVER_SWITCH = false # 是否图块遮掩的时候不显示主角
MANUAL_REFRESH = 4 # 手动刷新事件开关号
# ，打开即刷新一次，无需手动关闭
MOVE_REFRESH = 5 # 事件移动时刷新小地图事件开关号
#（效果较好，但耗费内存，请谨慎开启！）
# 可以和手动刷新事件开关配合使用
AUTO_REFRESH = 6 # 所有小地图事件强制刷新开关号
#（效果最好，严重耗费内存，请谨慎开启！）
WINDOW_XY = MAP_VISIBLE # XY坐标窗口开关(和默认地图开关相同，如果不需要
# 相同请单独设置开关号
MAPNAME_COLOR =
Color.new(255, 255, 255, 255) # 地图名颜色，如果是其他颜色请指定
XYNAME_COLOR =
Color.new(192, 224, 255, 255) # XY名字的颜色，如果是其他颜色请指定
XYNUMBER_COLOR =
Color.new(255, 255, 255, 255) # XY数字的颜色，如果是其他颜色请指定
XY_OPACITY = 0 # XY窗口的透明度，默认完全透明
XY_B_OPACITY = 0 # XY窗口背景的透明度，默认完全透明
XY_C_OPACITY = 255 # XY窗口内容的透明度，默认完全不透明
XYBACK_PNG = "" # XY背景图片文件名（注：背景图片会遮挡小地图）
XYBACK_OPATITY = 192 # XY背景透明度（建议透明，否则会完全盖住）
XY_WORD_X = "X:" # 表示X坐标的用语
XY_WORD_Y = "Y:" # 表示Y坐标的用语
BLUR = true # 柔化开关，对地图统一柔化
NO_ACTOR_SWITCH = 7 # 不显示主角的开关
ACTOR_MOVE = false # 主角走路开关(会占用些许内存，请谨慎开启）
end

复制代码

检查设定部分这些开关号，尤其是刷新部分的这些开关，请自行修改

月下黄昏 发表于 2011-11-22 13:37:00

精灵使者发表于 2011-11-22 13:02
楼主根本不看设定部分……
VISIBLE = true # 最初是否可见
改为false

我为什么只要要一开您的这个脚本就一卡一卡的？？

月下黄昏于2011-11-22 13:45补充以下内容：
哦对呢而且只可以开一次进呢一张图之后就不可以开呢？？
貌似和其他脚本有冲突！

精灵使者 发表于 2011-11-22 13:02:13

本帖最后由精灵使者于 2011-11-22 13:03 编辑

楼主根本不看设定部分……
VISIBLE = true # 最初是否可见
改为false
http://rpg.blue/forum.php?mod=viewthread&tid=175971
你可以直接用我的加强版替换

月下黄昏 发表于 2011-11-22 12:23:41

我是问如何一开始进入游戏的时候让他别自动显示 - -||啊

枪胜贤者 发表于 2011-11-22 11:27:41

本帖最后由精灵使者于 2011-11-22 13:04 编辑

#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================
#==============================================================================
# ■ 縮小地图的表示(ver 0.999)
# by ピニョン clum-sea
#==============================================================================
#==============================================================================
# □ 前期定义
#==============================================================================
module PLAN_Map_Window
WIN_X = 8 # 地图的 X 座標
WIN_Y = 8 # 地图的 Y 座標
WIN_WIDTH = 8*32 # 地图的宽度
WIN_HEIGHT = 6*32 # 地图的高度
ZOOM = 4.0 # 地图的放缩比例
WINDOWSKIN = "" # 自定义地图窗口素材，如果留空则是默认的
ON_OFF_KEY = Input::A # 打开地图的按钮，A就是键盘的Z键
SWITCH = 100 # 禁用地图功能的开关，默认这个就是打开100号开关则禁止
# 使用地图功能，关闭则可以使用地图功能
WINDOW_MOVE = true # 窗口中的地图跟随移动，(true:跟随, false:固定)
OVER_X = 632 - WIN_WIDTH # 移動后的 X 座標(初期位置と往復します)
OVER_Y = 8 # 移動后的 Y 座標(初期位置と往復します)
OPACITY = 192 # 窗口的透明度
C_OPACITY = 192 # 地图的透明度
VISIBLE = false # 最初是否可见
end
#==============================================================================
# ■ Game_Temp
#==============================================================================
class Game_Temp
attr_accessor :map_visible # 地图的表示状態
alias plan_map_window_initialize initialize
def initialize
plan_map_window_initialize
@map_visible = true
end
end
#==============================================================================
# ■ Scene_Map
#==============================================================================
class Scene_Map
#--------------------------------------------------------------------------
# ● 主处理
#--------------------------------------------------------------------------
alias plan_map_window_main main
def main
@map_window = Window_Map.new
@map_window.visible = $game_temp.map_visible
plan_map_window_main
@map_window.dispose
end
#--------------------------------------------------------------------------
# ● 更新
#--------------------------------------------------------------------------
alias plan_map_window_update update
def update
$game_temp.map_visible = @map_window.visible
plan_map_window_update
unless $game_switches[PLAN_Map_Window::SWITCH]
if Input.trigger?(PLAN_Map_Window::ON_OFF_KEY)
if @map_window.visible
@map_window.visible = false
else
@map_window.visible = true
end
end
else
if @map_window.visible
@map_window.visible = false
end
end
if @map_window.visible
@map_window.update
end
end
#--------------------------------------------------------------------------
# ● 场所移动的变化
#--------------------------------------------------------------------------
alias plan_map_window_transfer_player transfer_player
def transfer_player
visible = @map_window.visible
@map_window.visible = false
plan_map_window_transfer_player
@map_window.dispose
@map_window = Window_Map.new
@map_window.visible = visible
end
end
#==============================================================================
# ■ Window_Map
#==============================================================================
class Window_Map < Window_Base
#--------------------------------------------------------------------------
# ● 初始化
#--------------------------------------------------------------------------
def initialize
x = PLAN_Map_Window::WIN_X
y = PLAN_Map_Window::WIN_Y
w = PLAN_Map_Window::WIN_WIDTH
h = PLAN_Map_Window::WIN_HEIGHT
super(x, y, w, h)
unless PLAN_Map_Window::WINDOWSKIN.empty?
self.windowskin = RPG::Cache.windowskin(PLAN_Map_Window::WINDOWSKIN)
end
self.contents = Bitmap.new(width - 32, height - 32)
self.opacity = PLAN_Map_Window::OPACITY
self.contents_opacity = PLAN_Map_Window::C_OPACITY
@map_data = $game_map.data
@tileset = RPG::Cache.tileset($game_map.tileset_name)
@autotiles = []
for i in 0..6
autotile_name = $game_map.autotile_names[i]
@autotiles[i] = RPG::Cache.autotile(autotile_name)
end
@old_real_x = $game_player.real_x
@old_real_y = $game_player.real_y
@all_map = make_all_map
self.visible = PLAN_Map_Window::VISIBLE
refresh
end
#--------------------------------------------------------------------------
# ● 缩小图做成
#--------------------------------------------------------------------------
def make_all_map
all_map = Bitmap.new($game_map.width * 32, $game_map.height * 32)
for y in 0...$game_map.height
for x in 0...$game_map.width
for z in 0...3
tile_num = @map_data[x, y, z]
next if tile_num == nil
if tile_num < 384
if tile_num >= 48
tile_num -= 48
src_rect = Rect.new(32, 2 * 32, 32, 32)
all_map.blt(x * 32, y * 32, @autotiles[tile_num / 48], src_rect)
end
else
tile_num -= 384
src_rect = Rect.new(tile_num % 8 * 32, tile_num / 8 * 32, 32, 32)
all_map.blt(x * 32, y * 32, @tileset, src_rect)
end
end
end
end
w = ($game_map.width / PLAN_Map_Window::ZOOM) * 32
h = ($game_map.height / PLAN_Map_Window::ZOOM) * 32
ret_bitmap = Bitmap.new(w, h)
src_rect = Rect.new(0, 0, all_map.width, all_map.height)
dest_rect = Rect.new(0, 0, ret_bitmap.width, ret_bitmap.height)
ret_bitmap.stretch_blt(dest_rect, all_map, src_rect)
all_map.dispose
return ret_bitmap
end
#--------------------------------------------------------------------------
# ● 刷新
#--------------------------------------------------------------------------
def refresh
self.contents.clear
one_tile_size = 32 / PLAN_Map_Window::ZOOM
x = $game_player.real_x - 128 * (self.contents.width / one_tile_size) / 2
y = $game_player.real_y - 128 * (self.contents.height / one_tile_size) / 2
x = x * one_tile_size / 128
y = y * one_tile_size / 128
half_width = self.contents.width * 128 / 2
rest_width = ($game_map.width * 128 - $game_player.real_x) * one_tile_size
rev_x = 0
if @all_map.width < self.contents.width
rev_x = (half_width - $game_player.real_x * one_tile_size) / 128
rev_x -= (self.contents.width - @all_map.width) / 2
x += rev_x
elsif half_width > $game_player.real_x * one_tile_size
rev_x = (half_width - $game_player.real_x * one_tile_size) / 128
x += rev_x
elsif half_width > rest_width
rev_x = -((half_width - rest_width) / 128)
x += rev_x
end
half_height = self.contents.height * 128 / 2
rest_height = ($game_map.height * 128 - $game_player.real_y) * one_tile_size
rev_y = 0
if @all_map.height < self.contents.height
rev_y = (half_height - $game_player.real_y * one_tile_size) / 128
rev_y -= (self.contents.height - @all_map.height) / 2
y += rev_y
elsif half_height > $game_player.real_y * one_tile_size
rev_y = (half_height - $game_player.real_y * one_tile_size) / 128
y += rev_y
elsif half_height > rest_height
rev_y = -((half_height - rest_height) / 128)
y += rev_y
end
src_rect = Rect.new(x, y, self.contents.width, self.contents.height)
self.contents.blt(0, 0, @all_map, src_rect)
if PLAN_Map_Window::WINDOW_MOVE == true
w = self.x..self.x + self.width
h = self.y..self.y + self.height
if w === $game_player.screen_x and h === $game_player.screen_y
if self.x == PLAN_Map_Window::WIN_X and self.y == PLAN_Map_Window::WIN_Y
self.x = PLAN_Map_Window::OVER_X
self.y = PLAN_Map_Window::OVER_Y
else
self.x = PLAN_Map_Window::WIN_X
self.y = PLAN_Map_Window::WIN_Y
end
end
end
if $game_party.actors.size > 0
for i in [2, 1, 0]
tile = @map_data[$game_player.x, $game_player.y, i]
next if tile == 0
return if $game_map.priorities[tile] > 0
end
actor = $game_party.actors[0]
bitmap = RPG::Cache.character(actor.character_name, actor.character_hue)
width = bitmap.width / 4
height = bitmap.height / 4
src_rect = Rect.new(0, 0, width, height)
w = width / PLAN_Map_Window::ZOOM
h = height / PLAN_Map_Window::ZOOM
x = self.contents.width / 2 - w / 2 + one_tile_size / 2 - rev_x
y = self.contents.height / 2 - h / 2 - rev_y
dest_rect = Rect.new(x, y, w, h)
self.contents.stretch_blt(dest_rect, bitmap, src_rect)
end
end
#--------------------------------------------------------------------------
# ● 更新
#--------------------------------------------------------------------------
def update
super
if @old_real_x != $game_player.real_x or @old_real_y != $game_player.real_y
@old_real_x = $game_player.real_x
@old_real_y = $game_player.real_y
refresh
end
end
#--------------------------------------------------------------------------
# ● 解放
#--------------------------------------------------------------------------
def dispose
super
@all_map.dispose
end
end
#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================

复制代码

月下黄昏 发表于 2011-11-20 20:23:26

本帖最后由精灵使者于 2011-11-22 13:07 编辑

你说的是那脚本啊我N久以前就弄呢啊，不过我用起来很卡而且一开那个就卡。。
并且我是问：如何在默认的情况下不自动显示小地图——我一进游戏这脚本就自动显示小地图！！
我是希望让他别一进入就自动显示小地图啊啊！！

月下黄昏于2011-11-21 14:03补充以下内容：

#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================
#==============================================================================
# ■ 縮小地图的表示(ver 0.999)
# by ピニョン clum-sea
#==============================================================================
#==============================================================================
# □ 前期定义
#==============================================================================
module PLAN_Map_Window
WIN_X = 8 # 地图的 X 座標
WIN_Y = 8 # 地图的 Y 座標
WIN_WIDTH = 8*32 # 地图的宽度
WIN_HEIGHT = 6*32 # 地图的高度
ZOOM = 4.0 # 地图的放缩比例
WINDOWSKIN = "" # 自定义地图窗口素材，如果留空则是默认的
ON_OFF_KEY = Input::A # 打开地图的按钮，A就是键盘的Z键
SWITCH = 100 # 禁用地图功能的开关，默认这个就是打开100号开关则禁止
# 使用地图功能，关闭则可以使用地图功能
WINDOW_MOVE = true # 窗口中的地图跟随移动，(true:跟随, false:固定)
OVER_X = 632 - WIN_WIDTH # 移動后的 X 座標(初期位置と往復します)
OVER_Y = 8 # 移動后的 Y 座標(初期位置と往復します)
OPACITY = 192 # 窗口的透明度
C_OPACITY = 192 # 地图的透明度
VISIBLE = true # 最初是否可见
end
#==============================================================================
# ■ Game_Temp
#==============================================================================
class Game_Temp
attr_accessor :map_visible # 地图的表示状態
alias plan_map_window_initialize initialize
def initialize
plan_map_window_initialize
@map_visible = true
end
end
#==============================================================================
# ■ Scene_Map
#==============================================================================
class Scene_Map
#--------------------------------------------------------------------------
# ● 主处理
#--------------------------------------------------------------------------
alias plan_map_window_main main
def main
@map_window = Window_Map.new
@map_window.visible = $game_temp.map_visible
plan_map_window_main
@map_window.dispose
end
#--------------------------------------------------------------------------
# ● 更新
#--------------------------------------------------------------------------
alias plan_map_window_update update
def update
$game_temp.map_visible = @map_window.visible
plan_map_window_update
unless $game_switches[PLAN_Map_Window::SWITCH]
if Input.trigger?(PLAN_Map_Window::ON_OFF_KEY)
if @map_window.visible
@map_window.visible = false
else
@map_window.visible = true
end
end
else
if @map_window.visible
@map_window.visible = false
end
end
if @map_window.visible
@map_window.update
end
end
#--------------------------------------------------------------------------
# ● 场所移动的变化
#--------------------------------------------------------------------------
alias plan_map_window_transfer_player transfer_player
def transfer_player
visible = @map_window.visible
@map_window.visible = false
plan_map_window_transfer_player
@map_window.dispose
@map_window = Window_Map.new
@map_window.visible = visible
end
end
#==============================================================================
# ■ Window_Map
#==============================================================================
class Window_Map < Window_Base
#--------------------------------------------------------------------------
# ● 初始化
#--------------------------------------------------------------------------
def initialize
x = PLAN_Map_Window::WIN_X
y = PLAN_Map_Window::WIN_Y
w = PLAN_Map_Window::WIN_WIDTH
h = PLAN_Map_Window::WIN_HEIGHT
super(x, y, w, h)
unless PLAN_Map_Window::WINDOWSKIN.empty?
self.windowskin = RPG::Cache.windowskin(PLAN_Map_Window::WINDOWSKIN)
end
self.contents = Bitmap.new(width - 32, height - 32)
self.opacity = PLAN_Map_Window::OPACITY
self.contents_opacity = PLAN_Map_Window::C_OPACITY
@map_data = $game_map.data
@tileset = RPG::Cache.tileset($game_map.tileset_name)
@autotiles = []
for i in 0..6
autotile_name = $game_map.autotile_names[i]
@autotiles[i] = RPG::Cache.autotile(autotile_name)
end
@old_real_x = $game_player.real_x
@old_real_y = $game_player.real_y
@all_map = make_all_map
self.visible = PLAN_Map_Window::VISIBLE
refresh
end
#--------------------------------------------------------------------------
# ● 缩小图做成
#--------------------------------------------------------------------------
def make_all_map
all_map = Bitmap.new($game_map.width * 32, $game_map.height * 32)
for y in 0...$game_map.height
for x in 0...$game_map.width
for z in 0...3
tile_num = @map_data[x, y, z]
next if tile_num == nil
if tile_num < 384
if tile_num >= 48
tile_num -= 48
src_rect = Rect.new(32, 2 * 32, 32, 32)
all_map.blt(x * 32, y * 32, @autotiles[tile_num / 48], src_rect)
end
else
tile_num -= 384
src_rect = Rect.new(tile_num % 8 * 32, tile_num / 8 * 32, 32, 32)
all_map.blt(x * 32, y * 32, @tileset, src_rect)
end
end
end
end
w = ($game_map.width / PLAN_Map_Window::ZOOM) * 32
h = ($game_map.height / PLAN_Map_Window::ZOOM) * 32
ret_bitmap = Bitmap.new(w, h)
src_rect = Rect.new(0, 0, all_map.width, all_map.height)
dest_rect = Rect.new(0, 0, ret_bitmap.width, ret_bitmap.height)
ret_bitmap.stretch_blt(dest_rect, all_map, src_rect)
all_map.dispose
return ret_bitmap
end
#--------------------------------------------------------------------------
# ● 刷新
#--------------------------------------------------------------------------
def refresh
self.contents.clear
one_tile_size = 32 / PLAN_Map_Window::ZOOM
x = $game_player.real_x - 128 * (self.contents.width / one_tile_size) / 2
y = $game_player.real_y - 128 * (self.contents.height / one_tile_size) / 2
x = x * one_tile_size / 128
y = y * one_tile_size / 128
half_width = self.contents.width * 128 / 2
rest_width = ($game_map.width * 128 - $game_player.real_x) * one_tile_size
rev_x = 0
if @all_map.width < self.contents.width
rev_x = (half_width - $game_player.real_x * one_tile_size) / 128
rev_x -= (self.contents.width - @all_map.width) / 2
x += rev_x
elsif half_width > $game_player.real_x * one_tile_size
rev_x = (half_width - $game_player.real_x * one_tile_size) / 128
x += rev_x
elsif half_width > rest_width
rev_x = -((half_width - rest_width) / 128)
x += rev_x
end
half_height = self.contents.height * 128 / 2
rest_height = ($game_map.height * 128 - $game_player.real_y) * one_tile_size
rev_y = 0
if @all_map.height < self.contents.height
rev_y = (half_height - $game_player.real_y * one_tile_size) / 128
rev_y -= (self.contents.height - @all_map.height) / 2
y += rev_y
elsif half_height > $game_player.real_y * one_tile_size
rev_y = (half_height - $game_player.real_y * one_tile_size) / 128
y += rev_y
elsif half_height > rest_height
rev_y = -((half_height - rest_height) / 128)
y += rev_y
end
src_rect = Rect.new(x, y, self.contents.width, self.contents.height)
self.contents.blt(0, 0, @all_map, src_rect)
if PLAN_Map_Window::WINDOW_MOVE == true
w = self.x..self.x + self.width
h = self.y..self.y + self.height
if w === $game_player.screen_x and h === $game_player.screen_y
if self.x == PLAN_Map_Window::WIN_X and self.y == PLAN_Map_Window::WIN_Y
self.x = PLAN_Map_Window::OVER_X
self.y = PLAN_Map_Window::OVER_Y
else
self.x = PLAN_Map_Window::WIN_X
self.y = PLAN_Map_Window::WIN_Y
end
end
end
if $game_party.actors.size > 0
for i in [2, 1, 0]
tile = @map_data[$game_player.x, $game_player.y, i]
next if tile == 0
return if $game_map.priorities[tile] > 0
end
actor = $game_party.actors[0]
bitmap = RPG::Cache.character(actor.character_name, actor.character_hue)
width = bitmap.width / 4
height = bitmap.height / 4
src_rect = Rect.new(0, 0, width, height)
w = width / PLAN_Map_Window::ZOOM
h = height / PLAN_Map_Window::ZOOM
x = self.contents.width / 2 - w / 2 + one_tile_size / 2 - rev_x
y = self.contents.height / 2 - h / 2 - rev_y
dest_rect = Rect.new(x, y, w, h)
self.contents.stretch_blt(dest_rect, bitmap, src_rect)
end
end
#--------------------------------------------------------------------------
# ● 更新
#--------------------------------------------------------------------------
def update
super
if @old_real_x != $game_player.real_x or @old_real_y != $game_player.real_y
@old_real_x = $game_player.real_x
@old_real_y = $game_player.real_y
refresh
end
end
#--------------------------------------------------------------------------
# ● 解放
#--------------------------------------------------------------------------
def dispose
super
@all_map.dispose
end
end
#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================

复制代码

就是这段脚本如何让他一进入游戏就不自动显示啊？？

令狐林 发表于 2011-11-20 17:40:55

http://rpg.blue/forum.php?mod=vi ... F%E5%9C%B0%E5%9B%BE
小地图脚本
按shift开关

帐号		自动登录	找回密码
密码			注册会员

正文摘要:

回复