那个，使用跳过标题脚本后怎样返回标题？

Zigzag · 发表于 2011-10-7 14:11:01

跳过标题貌似是把原标题删掉了

iisnow · 发表于 2011-10-7 14:23:10

$scene = Scene_Title.new

在事件中添加这句脚本就行了

Zigzag · 发表于 2011-10-7 14:39:22

iisnow 发表于 2011-10-7 14:23
$scene = Scene_Title.new

在事件中添加这句脚本就行了

- -貌似不能返回啊

各种压力的猫君 · 发表于 2011-10-7 14:43:54

本帖最后由各种压力的猫君于 2011-10-7 15:39 编辑

新建个工程，把 Scene_Title 改名（随意改）
脚本内容里 class Scene_Title 改掉（不用和脚本名统一，脚本名其实无所谓）
改好之后把这个脚本插到你的工程 Scene_Title 下面，
然后事件添加（以改为 class Scene_Title_noskip 为例）

$scene = Scene_Title_noskip.new

复制代码

#==============================================================================
# ■ Scene_Title
#------------------------------------------------------------------------------
# 　处理标题画面的类。
#==============================================================================
class Scene_Title
#--------------------------------------------------------------------------
# ● 主处理
#--------------------------------------------------------------------------
def main
# 战斗测试的情况下
if $BTEST
battle_test
return
end
# 载入数据库
$data_actors = load_data("Data/Actors.rxdata")
$data_classes = load_data("Data/Classes.rxdata")
$data_skills = load_data("Data/Skills.rxdata")
$data_items = load_data("Data/Items.rxdata")
$data_weapons = load_data("Data/Weapons.rxdata")
$data_armors = load_data("Data/Armors.rxdata")
$data_enemies = load_data("Data/Enemies.rxdata")
$data_troops = load_data("Data/Troops.rxdata")
$data_states = load_data("Data/States.rxdata")
$data_animations = load_data("Data/Animations.rxdata")
$data_tilesets = load_data("Data/Tilesets.rxdata")
$data_common_events = load_data("Data/CommonEvents.rxdata")
$data_system = load_data("Data/System.rxdata")
# 判定继续的有效性
# 存档文件一个也不存在的时候也调查
# 有効为 @continue_enabled 为 true、無効为 false
@continue_enabled = false
for i in 0..3
if FileTest.exist?("Save#{i+1}.rxdata")
@continue_enabled = true
end
end
# 生成系统对像
$game_system = Game_System.new
# 判断是否跳过标题
if $donotskiptitle != true # 如果开关不为true
command_skip_title # 跳过标题
else # 否则的话不跳过
# 关掉开关，防止F12时显示标题
$donotskiptitle = nil
# 生成标题图形
@sprite = Sprite.new
@sprite.bitmap = RPG::Cache.title($data_system.title_name)
# 生成命令窗口
s1 = "新游戏"
s2 = "继续"
s3 = "退出"
@command_window = Window_Command.new(192, [s1, s2, s3])
@command_window.back_opacity = 160
@command_window.x = 320 - @command_window.width / 2
@command_window.y = 288
# 继续为有效的情况下、光标停止在继续上
# 无效的情况下、继续的文字显示为灰色
if @continue_enabled
@command_window.index = 1
else
@command_window.disable_item(1)
end
# 演奏标题 BGM
$game_system.bgm_play($data_system.title_bgm)
# 停止演奏 ME、BGS
Audio.me_stop
Audio.bgs_stop
# 执行过渡
Graphics.transition
# 主循环
loop do
# 刷新游戏画面
Graphics.update
# 刷新输入信息
Input.update
# 刷新画面
update
# 如果画面被切换就中断循环
if $scene != self
break
end
end
# 准备过渡
Graphics.freeze
# 释放命令窗口
@command_window.dispose
# 释放标题图形
@sprite.bitmap.dispose
@sprite.dispose
end
end
#--------------------------------------------------------------------------
# ● 刷新画面
#--------------------------------------------------------------------------
def update
# 刷新命令窗口
@command_window.update
# 按下 C 键的情况下
if Input.trigger?(Input::C)
# 命令窗口的光标位置的分支
case @command_window.index
when 0 # 新游戏
command_new_game
when 1 # 继续
command_continue
when 2 # 退出
command_shutdown
end
end
end
#--------------------------------------------------------------------------
# ● 跳过标题（新游戏）
#--------------------------------------------------------------------------
def command_skip_title
# 重置测量游戏时间用的画面计数器
Graphics.frame_count = 0
# 生成各种游戏对像
$game_temp = Game_Temp.new
$game_system = Game_System.new
$game_switches = Game_Switches.new
$game_variables = Game_Variables.new
$game_self_switches = Game_SelfSwitches.new
$game_screen = Game_Screen.new
$game_actors = Game_Actors.new
$game_party = Game_Party.new
$game_troop = Game_Troop.new
$game_map = Game_Map.new
$game_player = Game_Player.new
# 设置初期同伴位置
$game_party.setup_starting_members
# 设置初期位置的地图
$game_map.setup($data_system.start_map_id)
# 主角向初期位置移动
$game_player.moveto($data_system.start_x, $data_system.start_y)
# 刷新主角
$game_player.refresh
# 执行地图设置的 BGM 与 BGS 的自动切换
$game_map.autoplay
# 刷新地图 (执行并行事件)
$game_map.update
# 准备过渡
Graphics.freeze
# 切换地图画面
$scene = Scene_Map.new
end
#--------------------------------------------------------------------------
# ● 命令 : 新游戏
#--------------------------------------------------------------------------
def command_new_game
# 演奏确定 SE
$game_system.se_play($data_system.decision_se)
# 停止 BGM
Audio.bgm_stop
# 重置测量游戏时间用的画面计数器
Graphics.frame_count = 0
# 生成各种游戏对像
$game_temp = Game_Temp.new
$game_system = Game_System.new
$game_switches = Game_Switches.new
$game_variables = Game_Variables.new
$game_self_switches = Game_SelfSwitches.new
$game_screen = Game_Screen.new
$game_actors = Game_Actors.new
$game_party = Game_Party.new
$game_troop = Game_Troop.new
$game_map = Game_Map.new
$game_player = Game_Player.new
# 设置初期同伴位置
$game_party.setup_starting_members
# 设置初期位置的地图
$game_map.setup($data_system.start_map_id)
# 主角向初期位置移动
$game_player.moveto($data_system.start_x, $data_system.start_y)
# 刷新主角
$game_player.refresh
# 执行地图设置的 BGM 与 BGS 的自动切换
$game_map.autoplay
# 刷新地图 (执行并行事件)
$game_map.update
# 切换地图画面
$scene = Scene_Map.new
end
#--------------------------------------------------------------------------
# ● 命令 : 继续
#--------------------------------------------------------------------------
def command_continue
# 继续无效的情况下
unless @continue_enabled
# 演奏无效 SE
$game_system.se_play($data_system.buzzer_se)
return
end
# 演奏确定 SE
$game_system.se_play($data_system.decision_se)
# 切换到读档画面
$scene = Scene_Load.new
end
#--------------------------------------------------------------------------
# ● 命令 : 退出
#--------------------------------------------------------------------------
def command_shutdown
# 演奏确定 SE
$game_system.se_play($data_system.decision_se)
# BGM、BGS、ME 的淡入淡出
Audio.bgm_fade(800)
Audio.bgs_fade(800)
Audio.me_fade(800)
# 退出
$scene = nil
end
#--------------------------------------------------------------------------
# ● 战斗测试
#--------------------------------------------------------------------------
def battle_test
# 载入数据库 (战斗测试用)
$data_actors = load_data("Data/BT_Actors.rxdata")
$data_classes = load_data("Data/BT_Classes.rxdata")
$data_skills = load_data("Data/BT_Skills.rxdata")
$data_items = load_data("Data/BT_Items.rxdata")
$data_weapons = load_data("Data/BT_Weapons.rxdata")
$data_armors = load_data("Data/BT_Armors.rxdata")
$data_enemies = load_data("Data/BT_Enemies.rxdata")
$data_troops = load_data("Data/BT_Troops.rxdata")
$data_states = load_data("Data/BT_States.rxdata")
$data_animations = load_data("Data/BT_Animations.rxdata")
$data_tilesets = load_data("Data/BT_Tilesets.rxdata")
$data_common_events = load_data("Data/BT_CommonEvents.rxdata")
$data_system = load_data("Data/BT_System.rxdata")
# 重置测量游戏时间用的画面计数器
Graphics.frame_count = 0
# 生成各种游戏对像
$game_temp = Game_Temp.new
$game_system = Game_System.new
$game_switches = Game_Switches.new
$game_variables = Game_Variables.new
$game_self_switches = Game_SelfSwitches.new
$game_screen = Game_Screen.new
$game_actors = Game_Actors.new
$game_party = Game_Party.new
$game_troop = Game_Troop.new
$game_map = Game_Map.new
$game_player = Game_Player.new
# 设置战斗测试用同伴
$game_party.setup_battle_test_members
# 设置队伍 ID、可以逃走标志、战斗背景
$game_temp.battle_troop_id = $data_system.test_troop_id
$game_temp.battle_can_escape = true
$game_map.battleback_name = $data_system.battleback_name
# 演奏战斗开始 BGM
$game_system.se_play($data_system.battle_start_se)
# 演奏战斗 BGM
$game_system.bgm_play($game_system.battle_bgm)
# 切换到战斗画面
$scene = Scene_Battle.new
end
end
#==============================================================================
# ■ 修正部分
#------------------------------------------------------------------------------
# 　下面对一些返回标题的情况进行重定义。
#==============================================================================
class Interpreter # 事件调用“返回标题画面”
#--------------------------------------------------------------------------
# ● 返回标题画面
#--------------------------------------------------------------------------
def command_354
# 打开不跳过标题的开关，除非事件强制指定了跳过
$donotskiptitle = true unless $donotskiptitle == false
# 设置返回标题画面标志
$game_temp.to_title = true
# 结束
return false
end
end
class Scene_End # 菜单选择“结束游戏”—“返回标题画面”
#--------------------------------------------------------------------------
# ● 选择命令 [返回标题画面] 时的处理
#--------------------------------------------------------------------------
def command_to_title
# 打开不跳过标题的开关，除非事件强制指定了跳过
$donotskiptitle = true unless $donotskiptitle == false
# 演奏确定 SE
$game_system.se_play($data_system.decision_se)
# 淡入淡出 BGM、BGS、ME
Audio.bgm_fade(800)
Audio.bgs_fade(800)
Audio.me_fade(800)
# 切换到标题画面
$scene = Scene_Title.new
end
end

复制代码

删掉你现在的跳过标题脚本和Scene_Title脚本，然后把上面的脚本插到Scene_End脚本以下。

事件调用的“返回标题画面”和菜单中选择“结束游戏”—“返回标题画面”都会返回标题画面。

当希望不显示标题画面而返回标题画面（相当于重置，强制跳过）可以先用事件脚本关掉这个开关：

$donotskiptitle = "false"

复制代码

全局变量不会被存档，因此不用担心打开了开关之后下次打开游戏会出问题。
但是由于按F12重置的时候全局变量的值会被保留，因此需要46-47行关掉这个开关。

iisnow · 发表于 2011-10-7 14:45:17

Zigzag 发表于 2011-10-7 14:39
- -貌似不能返回啊

那就是脚本改变了Scene_Title，自己复制一个粘回去，换个名字
什么
Scene_Biaoti

然后在事件中写$scene = Scene_Biaoti.new
（或者你把脚本发上来看看，应该可以改的）

Zigzag · 发表于 2011-10-7 14:52:28

#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================
class Scene_Title
#==============================================================================
# 脚本作者:朱仔メ龍 QQ:251724722
# 脚本转载请保留以上信息
#==============================================================================
def main
$data_actors = load_data("Data/Actors.rxdata")
$data_classes = load_data("Data/Classes.rxdata")
$data_skills = load_data("Data/Skills.rxdata")
$data_items = load_data("Data/Items.rxdata")
$data_weapons = load_data("Data/Weapons.rxdata")
$data_armors = load_data("Data/Armors.rxdata")
$data_enemies = load_data("Data/Enemies.rxdata")
$data_troops = load_data("Data/Troops.rxdata")
$data_states = load_data("Data/States.rxdata")
$data_animations = load_data("Data/Animations.rxdata")
$data_tilesets = load_data("Data/Tilesets.rxdata")
$data_common_events = load_data("Data/CommonEvents.rxdata")
$data_system = load_data("Data/System.rxdata")
$game_system = Game_System.new
Graphics.frame_count = 0
$game_temp = Game_Temp.new
$game_system = Game_System.new
$game_switches = Game_Switches.new
$game_variables = Game_Variables.new
$game_self_switches = Game_SelfSwitches.new
$game_screen = Game_Screen.new
$game_actors = Game_Actors.new
$game_party = Game_Party.new
$game_troop = Game_Troop.new
$game_map = Game_Map.new
$game_player = Game_Player.new
$game_party.setup_starting_members
$game_map.setup($data_system.start_map_id)
$game_player.moveto($data_system.start_x, $data_system.start_y)
$game_player.refresh
$game_map.autoplay
$game_map.update
$scene = Scene_Map.new
end
end
#==============================================================================
# 本脚本来自www.66RPG.com，使用和转载请保留此信息
#==============================================================================

复制代码

Zigzag · 发表于 2011-10-7 14:57:28

iisnow 发表于 2011-10-7 14:45
那就是脚本改变了Scene_Title，自己复制一个粘回去，换个名字
什么
Scene_Biaoti

= =都是好答案啊……可惜不能同时认可两个

iisnow · 发表于 2011-10-7 15:08:26

Zigzag 发表于 2011-10-7 14:57
= =都是好答案啊……可惜不能同时认可两个

哈哈~无所谓了，我也是新手，到这只是学习，不求经验的

帐号		自动登录	找回密码
密码			注册会员

[已经解决] 那个，使用跳过标题脚本后怎样返回标题？

评分

浏览过的版块

开拓者

贵宾