升级提示窗口多停留2秒或者按空格消失

2000zs66rpg · 发表于 2012-8-7 18:22:51

本帖最后由 2000zs66rpg 于 2012-8-7 18:43 编辑

#==============================================================================
# 本脚本来自[url]www.66RPG.com[/url]，使用和转载请保留此信息
#==============================================================================
# 泛用型升级提示 v1.1
#
# 核心部分 By 叶子
# 窗口部分原作者：桜雅在土修改：叶子
#
# Date: 2-12-2006 －v1.0
# 3-2-2006 －v1.1
#==============================================================================
#
# 在对话时，调用“增加EXP”或“增减等级”指令前，请等待3帧以上，否则对话框来不及消失。
#
# 当打开此号数的开关的时候，等级上升将不会提示，比如默认打开45号开关，等级上升不再提示
$不显示升级窗口 = 197
#==============================================================================
class Game_Actor
#--------------------------------------------------------------------------
# ● 更改 EXP
# exp : 新的 EXP
#--------------------------------------------------------------------------
def exp=(exp)
# 记录旧等级
last_level = @level
@exp = [[exp, 9999999].min, 0].max
# 升级
while @exp >= @exp_list[@level+1] and @exp_list[@level+1] > 0
@level += 1
@hp = maxhp
@sp = maxsp
@sun = 0
# 学会特技
for j in $data_classes[@class_id].learnings
if j.level == @level
learn_skill(j.skill_id)
end
end
end
# 降级
while @exp < @exp_list[@level]
@level -= 1
end
# 修正当前的 HP 与 SP 超过最大值
@hp = [@hp, self.maxhp].min
@sp = [@sp, self.maxsp].min
# 升级了的话，升级显示处理
if @level > last_level and $game_switches[$不显示升级窗口] == false and
not $BTEST
show_level_up_result(last_level)
end
end
#--------------------------------------------------------------------------
# ● 升级显示处理
#--------------------------------------------------------------------------
def show_level_up_result(last_level)
actor_parameters = self.last_parameters(last_level)
last_maxhp = actor_parameters[0]
last_maxsp = actor_parameters[1]
last_str = actor_parameters[2]
last_dex = actor_parameters[3]
last_agi = actor_parameters[4]
last_int = actor_parameters[5]
level_up_window = Window_LevelUpWindow_A.new self,last_level,last_maxhp,
last_maxsp,last_str,last_dex,last_agi,last_int
level_up_window.visible = true
skill_learning_window = Window_SkillLearning_A.new(@class_id,
last_level, @level)
# 循环
loop do
# 刷新游戏画面
Graphics.update
# 刷新输入信息
Input.update
# 按下C就关闭窗口
@sun += 1
if @sun >= 50
unless skill_learning_window.refresh
level_up_window.dispose
skill_learning_window.dispose
return true
end
end
end
end
#--------------------------------------------------------------------------
# ● 一次取得全部旧属性
#--------------------------------------------------------------------------
def last_parameters(level)
#---------------------------
# maxhp
#---------------------------
n = [[$data_actors[@actor_id].parameters[0, level] + @maxhp_plus, 1].max, 9999].min
for i in @states
n *= $data_states[i].maxhp_rate / 100.0
end
n = [[Integer(n), 1].max, 9999].min
maxhp = n
#---------------------------
# maxsp
#---------------------------
n = [[$data_actors[@actor_id].parameters[1, level] + @maxsp_plus, 0].max, 9999].min
for i in @states
n *= $data_states[i].maxsp_rate / 100.0
end
n = [[Integer(n), 0].max, 9999].min
maxsp = n
#---------------------------
# str
#---------------------------
n = $data_actors[@actor_id].parameters[2, level]
weapon = $data_weapons[@weapon_id]
armor1 = $data_armors[@armor1_id]
armor2 = $data_armors[@armor2_id]
armor3 = $data_armors[@armor3_id]
armor4 = $data_armors[@armor4_id]
n += weapon != nil ? weapon.str_plus : 0
n += armor1 != nil ? armor1.str_plus : 0
n += armor2 != nil ? armor2.str_plus : 0
n += armor3 != nil ? armor3.str_plus : 0
n += armor4 != nil ? armor4.str_plus : 0
n = [[n + @str_plus, 1].max, 999].min
for i in @states
n *= $data_states[i].str_rate / 100.0
end
n = [[Integer(n), 1].max, 999].min
str = n
#---------------------------
# dex
#---------------------------
n = $data_actors[@actor_id].parameters[3, level]
weapon = $data_weapons[@weapon_id]
armor1 = $data_armors[@armor1_id]
armor2 = $data_armors[@armor2_id]
armor3 = $data_armors[@armor3_id]
armor4 = $data_armors[@armor4_id]
n += weapon != nil ? weapon.dex_plus : 0
n += armor1 != nil ? armor1.dex_plus : 0
n += armor2 != nil ? armor2.dex_plus : 0
n += armor3 != nil ? armor3.dex_plus : 0
n += armor4 != nil ? armor4.dex_plus : 0
n = [[n + @dex_plus, 1].max, 999].min
for i in @states
n *= $data_states[i].dex_rate / 100.0
end
n = [[Integer(n), 1].max, 999].min
dex = n
#---------------------------
# agi
#---------------------------
n = $data_actors[@actor_id].parameters[4, level]
weapon = $data_weapons[@weapon_id]
armor1 = $data_armors[@armor1_id]
armor2 = $data_armors[@armor2_id]
armor3 = $data_armors[@armor3_id]
armor4 = $data_armors[@armor4_id]
n += weapon != nil ? weapon.agi_plus : 0
n += armor1 != nil ? armor1.agi_plus : 0
n += armor2 != nil ? armor2.agi_plus : 0
n += armor3 != nil ? armor3.agi_plus : 0
n += armor4 != nil ? armor4.agi_plus : 0
n = [[n + @agi_plus, 1].max, 999].min
for i in @states
n *= $data_states[i].agi_rate / 100.0
end
n = [[Integer(n), 1].max, 999].min
agi = n
#---------------------------
# int
#---------------------------
n = $data_actors[@actor_id].parameters[5, level]
weapon = $data_weapons[@weapon_id]
armor1 = $data_armors[@armor1_id]
armor2 = $data_armors[@armor2_id]
armor3 = $data_armors[@armor3_id]
armor4 = $data_armors[@armor4_id]
n += weapon != nil ? weapon.int_plus : 0
n += armor1 != nil ? armor1.int_plus : 0
n += armor2 != nil ? armor2.int_plus : 0
n += armor3 != nil ? armor3.int_plus : 0
n += armor4 != nil ? armor4.int_plus : 0
n = [[n + @int_plus, 1].max, 999].min
for i in @states
n *= $data_states[i].int_rate / 100.0
end
n = [[Integer(n), 1].max, 999].min
int = n
return [maxhp, maxsp, str, dex, agi, int]
end
end
#==============================================================================
# 本脚本来自[url]www.66RPG.com[/url]，使用和转载请保留此信息
#==============================================================================
#==============================================================================
# 本脚本来自[url]www.66RPG.com[/url]，使用和转载请保留此信息
#==============================================================================
# ————————————————————————————————————
# ▼▲▼ XRXS_BP10. LEVEL UP!能力上昇表示ウィンドウ plus ▼▲▼
# by 桜雅在土
#——以下3个如果需要修改，直接输入文件名即可
$data_system_level_up_se = "Audio/ME/升级" #升级时的音效设置
$data_system_level_up_me = "" # 升级时播放的ME
$data_system_skilllearn_se = "Audio/ME/学会技能" # 学会特技时播放的声效。
#==============================================================================
# ■ Window_LevelUpWindow
#------------------------------------------------------------------------------
# 　バトル終了時、レベルアップした場合にステータスを表示するウィンドウです。
#==============================================================================
class Window_LevelUpWindow_A < Window_Base
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(actor, last_lv, up_hp, up_sp, up_str, up_dex, up_agi, up_int)
super(210, 100, 220, 222)
self.contents = Bitmap.new(width - 32, height - 32)
self.visible = false
self.back_opacity = 160
# 防止被对话框遮住
self.z = 9999
refresh(actor, last_lv, up_hp, up_sp, up_str, up_dex, up_agi, up_int)
# SEの再生
if $data_system_level_up_se != ""
Audio.se_play($data_system_level_up_se)
end
# MEの再生
if $data_system_level_up_me != ""
Audio.me_stop
Audio.me_play($data_system_level_up_me)
end
end
#--------------------------------------------------------------------------
# ● リフレッシュ
#--------------------------------------------------------------------------
def refresh(actor, last_lv, up_hp, up_sp, up_str, up_dex, up_agi, up_int)
self.contents.clear
self.contents.font.color = text_color(6)
self.contents.font.size = 20
self.contents.draw_text(0, 0, 160, 24, actor.name.to_s)
self.contents.font.color = system_color
self.contents.font.size = 18
self.contents.draw_text( 0, 26, 160, 24, "等级")
self.contents.font.size = 18
self.contents.draw_text( 0, 48, 80, 24, $data_system.words.hp)
self.contents.draw_text( 0, 70, 80, 24, $data_system.words.sp)
self.contents.draw_text( 0, 92, 80, 24, $data_system.words.str)
self.contents.draw_text( 0, 114, 80, 24, $data_system.words.dex)
self.contents.draw_text( 0, 136, 80, 24, $data_system.words.agi)
self.contents.draw_text( 0, 158, 80, 24, $data_system.words.int)
self.contents.draw_text(110, 26, 128, 24, "→")
self.contents.draw_text(110, 48, 128, 24, "→")
self.contents.draw_text(110, 70, 128, 24, "→")
self.contents.draw_text(110, 92, 128, 24, "→")
self.contents.draw_text(110, 114, 128, 24, "→")
self.contents.draw_text(110, 136, 128, 24, "→")
self.contents.draw_text(110, 158, 128, 24, "→")
self.contents.font.color = normal_color
self.contents.draw_text( 60, 26, 88, 24, last_lv.to_s)
self.contents.draw_text( 60, 48, 72, 24, up_hp.to_s)
self.contents.draw_text( 60, 70, 72, 24, up_sp.to_s)
self.contents.draw_text( 60, 92, 72, 24, up_str.to_s)
self.contents.draw_text( 60, 114, 72, 24, up_dex.to_s)
self.contents.draw_text( 60, 136, 72, 24, up_agi.to_s)
self.contents.draw_text( 60, 158, 72, 24, up_int.to_s)
self.contents.draw_text( 145, 26, 128, 24, actor.level.to_s)
self.contents.draw_text( 145, 48, 128, 24, actor.maxhp.to_s)
self.contents.draw_text( 145, 70, 128, 24, actor.maxsp.to_s)
self.contents.draw_text( 145, 92, 128, 24, actor.str.to_s)
self.contents.draw_text( 145, 114, 128, 24, actor.dex.to_s)
self.contents.draw_text( 145, 136, 128, 24, actor.agi.to_s)
self.contents.draw_text( 145, 158, 128, 24, actor.int.to_s)
end
end
#==============================================================================
# ■ Window_SkillLearning
#------------------------------------------------------------------------------
# 　レベルアップ時などにスキルを習得した場合にそれを表示するウィンドウです。
#==============================================================================
class Window_SkillLearning_A < Window_Base
#--------------------------------------------------------------------------
# ● オブジェクト初期化
#--------------------------------------------------------------------------
def initialize(class_id, last_lv, now_lv)
super(210, 322, 220, 56)
self.contents = Bitmap.new(width - 32, height - 16) # わざと▽を表示
self.visible = false
self.back_opacity = 160
# 防止被对话框遮住
self.z = 9999
@learn_skills = []
for i in 0...$data_classes[class_id].learnings.size
learn_lv = $data_classes[class_id].learnings[i].level
# 今回のレベルアップ範囲で習得するスキルの場合
if learn_lv > last_lv and learn_lv <= now_lv
@learn_skills.push $data_skills[
$data_classes[class_id].learnings[i].skill_id].name
end
end
refresh
end
#--------------------------------------------------------------------------
# ● リフレッシュ
#--------------------------------------------------------------------------
def refresh
# 各描写
skill_name = @learn_skills.shift
if skill_name == nil
return false
end
# SEの再生
if $data_system_skilllearn_se != ""
Audio.se_play($data_system_skilllearn_se, 100, 100)
end
self.contents.clear
self.contents.font.size = 18
self.contents.font.color = text_color(0)
self.contents.draw_text(0,0,156,24, "习得法术："+skill_name)
self.contents.font.color = text_color(6)
self.contents.draw_text(0,0,156,24, " "+skill_name)
self.contents.font.color = text_color(0)
self.visible = true
return true
end
end
#==============================================================================
# 本脚本来自[url]www.66RPG.com[/url]，使用和转载请保留此信息
#==============================================================================

复制代码

以上是我的脚本

リデル · 发表于 2012-8-8 04:11:46

這個其實很簡單實現
1.如果要多停留2秒
在

@sun += 1
if @sun >= 50

复制代码

將50改成90就可以了。
爲什麽呢？我的理解就是2*20幀，那裡是自動顯示停留的幀數。
2.如果按下空格鍵跳過的話
將@sun += 1
if @sun >= 50
改為

if Input.trigger?(Input::C)

复制代码

來判斷玩家按下空格鍵。
我就這樣解釋了

2000zs66rpg · 发表于 2012-8-8 08:29:07

リデル发表于 2012-8-8 04:11
這個其實很簡單實現
1.如果要多停留2秒
在將50改成90就可以了。

照你的办法做问题解决了太感谢了

2000zs66rpg · 发表于 2012-8-8 08:36:43

リデル发表于 2012-8-8 04:11
這個其實很簡單實現
1.如果要多停留2秒
在將50改成90就可以了。

还有个小问题我改成按空格取消窗口。战斗结束，提示升级，几秒钟后，地图的BGM响起了
有什么办法设置成：窗口消失之后，完全从战斗场景转换到地图场景，地图BGM才响起。而不是还在战斗场景的时候地图BGM就提前响起？

リデル · 发表于 2012-8-8 10:48:02

2000zs66rpg 发表于 2012-8-8 08:36
还有个小问题我改成按空格取消窗口。战斗结束，提示升级，几秒钟后，地图的BGM响起了
有什么办法设置成 ...

返回地圖音樂
這個好像要在戰鬥腳本Scene_Battle內修改
我無能為力，不好意思

帐号		自动登录	找回密码
密码			注册会员

[已经解决] 升级提示窗口多停留2秒或者按空格消失

点评

点评