图片标题修改求思路求方法......

恐惧剑刃 · 发表于 2013-9-21 20:54:33

美丽晨露发表于 2013-9-21 20:05
思路还是可行的，但是我还是有些蒙······
这是我之前写的脚本······表示是用when判定显示的 ...

#在main里
#随机人物图
@rand_people = rand(2) + 1#现在@rand_people的值只可能是1或2
#生成
@people_array = []
for j in 0...2
@people_array[j] = Sprite.new#必须全部Sprite.new
case @rand_people
when 1
#这里的<<和+其实是一样的意思
@people_array[j].bitmap = Bitmap.new("Graphics/Titles/莉德露"<<(j+1).to_s)
when 2
@people_array[j].bitmap = Bitmap.new(("Graphics/Titles/巫女"<<(j+1).to_s)
end
#@people_array[j].x = 0
#@people_array[j].y = 0
#@people_array[j].opacity = 255
end
#在update里
if Input.trigger?(Input::C)
case @command_index
when 0
#先释放掉之前的图片否则就效果错误了，要么改透明度重新调图
#for i in 0...2
#@people_array[i].bitmap.dispose
#@people_array[i].dispose
#end
#不管怎么分歧，之前图是要影藏的，所以这个可以放在分歧外边
for i in 0...2
@people_array[i].opacity = 0
end
@people_new.Sprite.new
case @rand_people#必须带@，否则随机数传不过来（除$）
when 1
#方法1
#读取新的图片
#@people_array[0].bitmap= Bitmap.new("Graphics/Titles/莉德露3" )
#方法2
#因为只是一张图可以改之前图的透明度，重新调图
@people_new.bitmap = Bitmap.new("Graphics/Titles/莉德露3" )
when 2
#方法1
#读取新的图片
#@people_array[0].bitmap= Bitmap.new("Graphics/Titles/巫女3" )
#方法2
#因为只是一张图可以改之前图的透明度，重新调图
@people_new.bitmap= Bitmap.new("Graphics/Titles/巫女3" )
end
#@people_new.x = 0
#@people_new.y = 0
#@people_new.opacity = 255
for t in 0...5#等待。调整5改变等待时间
Graphics.update
end
command_new_game
when 1
command_continue
when 2
when 3
command_shutdown
end
end

复制代码

美丽晨露 · 发表于 2013-9-21 21:58:32

本帖最后由美丽晨露于 2013-9-21 22:19 编辑

恋′挂机发表于 2013-9-21 20:54

谢谢的说
不知道怎么回事
@people_array[j].bitmap = Bitmap.new(("Graphics/Titles/巫女"<<(j+1).to_s)
下的end一直报错······
没法测试效果

myownroc · 发表于 2013-9-21 22:26:21

美丽晨露发表于 2013-9-21 21:58 谢谢的说不知道怎么回事 @people_array[j].bitmap = Bitmap.new(("Graphics/Titles/巫女" ...

这句话明显少了右括号啊。。。
现在才看到。。。

恐惧剑刃 · 发表于 2013-9-21 22:36:48

美丽晨露发表于 2013-9-21 21:58
谢谢的说
不知道怎么回事
@people_array[j].bitmap = Bitmap.new(("Graphics/Titles/巫女" ...

13行多了一个括号

#==============================================================================
# ■ Scene_Title
#------------------------------------------------------------------------------
# 　处理标题画面的类。
#==============================================================================
class Scene_Title
#--------------------------------------------------------------------------
# ● 主处理
#--------------------------------------------------------------------------
def main
# 战斗测试的情况下
if $BTEST
battle_test
return
end
# 载入数据库
$data_actors = load_data("Data/Actors.rxdata")
$data_classes = load_data("Data/Classes.rxdata")
$data_skills = load_data("Data/Skills.rxdata")
$data_items = load_data("Data/Items.rxdata")
$data_weapons = load_data("Data/Weapons.rxdata")
$data_armors = load_data("Data/Armors.rxdata")
$data_enemies = load_data("Data/Enemies.rxdata")
$data_troops = load_data("Data/Troops.rxdata")
$data_states = load_data("Data/States.rxdata")
$data_animations = load_data("Data/Animations.rxdata")
$data_tilesets = load_data("Data/Tilesets.rxdata")
$data_common_events = load_data("Data/CommonEvents.rxdata")
$data_system = load_data("Data/System.rxdata")
# 生成系统对像
$game_system = Game_System.new
# 生成标题图形
@sprite= Sprite.new
@sprite.bitmap = RPG::Cache.title($data_system.title_name)
@rand_people = rand(2) + 1#现在@rand_people的值只可能是1或2
#生成
@people_array = []
for j in 0...2
@people_array[j] = Sprite.new#必须全部Sprite.new
case @rand_people
when 1
#这里的<<和+其实是一样的意思
@people_array[j].bitmap = Bitmap.new("Graphics/Titles/莉德露"<<(j+1).to_s)
when 2
@people_array[j].bitmap = Bitmap.new("Graphics/Titles/巫女"<<(j+1).to_s)
end
#@people_array[j].x = 0
#@people_array[j].y = 0
#@people_array[j].opacity = 255
end
# 生成命令窗口
s1 = "新游戏"
s2 = "继续"
s3 = "退出"
@command_window = Window_Command.new(192, [s1, s2, s3])
@command_window.back_opacity = 160
@command_window.x = 320 - @command_window.width / 2
@command_window.y = 288
# 判定继续的有效性
# 存档文件一个也不存在的时候也调查
# 有効为 @continue_enabled 为 true、无效为 false
@continue_enabled = false
for i in 0..3
if FileTest.exist?("Save#{i+1}.rxdata")
@continue_enabled = true
end
end
# 继续为有效的情况下、光标停止在继续上
# 无效的情况下、继续的文字显示为灰色
if @continue_enabled
@command_window.index = 1
else
@command_window.disable_item(1)
end
# 演奏标题 BGM
$game_system.bgm_play($data_system.title_bgm)
# 停止演奏 ME、BGS
Audio.me_stop
Audio.bgs_stop
# 执行过渡
Graphics.transition
# 主循环
loop do
# 刷新游戏画面
Graphics.update
# 刷新输入信息
Input.update
# 刷新画面
update
# 如果画面被切换就中断循环
if $scene != self
break
end
end
# 装备过渡
Graphics.freeze
# 释放命令窗口
@command_window.dispose
# 释放标题图形
@sprite.bitmap.dispose
@sprite.dispose
end
#--------------------------------------------------------------------------
# ● 刷新画面
#--------------------------------------------------------------------------
def update
# 刷新命令窗口
@command_window.update
# 按下 C 键的情况下
if Input.trigger?(Input::C)
case @command_index
when 0
#先释放掉之前的图片否则就效果错误了，要么改透明度重新调图
#for i in 0...2
#@people_array[i].bitmap.dispose
#@people_array[i].dispose
#end
#不管怎么分歧，之前图是要影藏的，所以这个可以放在分歧外边
for i in 0...2
@people_array[i].opacity = 0
end
@people_new.Sprite.new
case @rand_people#必须带@，否则随机数传不过来（除$）
when 1
#方法1
#读取新的图片
#@people_array[0].bitmap= Bitmap.new("Graphics/Titles/莉德露3" )
#方法2
#因为只是一张图可以改之前图的透明度，重新调图
@people_new.bitmap = Bitmap.new("Graphics/Titles/莉德露3" )
when 2
#方法1
#读取新的图片
#@people_array[0].bitmap= Bitmap.new("Graphics/Titles/巫女3" )
#方法2
#因为只是一张图可以改之前图的透明度，重新调图
@people_new.bitmap= Bitmap.new("Graphics/Titles/巫女3" )
end
#@people_new.x = 0
#@people_new.y = 0
#@people_new.opacity = 255
for t in 0...5#等待。调整5改变等待时间
Graphics.update
end
command_new_game
when 1
command_continue
when 2
when 3
command_shutdown
end
end
end
#--------------------------------------------------------------------------
# ● 命令 : 新游戏
#--------------------------------------------------------------------------
def command_new_game
# 演奏确定 SE
$game_system.se_play($data_system.decision_se)
# 停止 BGM
Audio.bgm_stop
# 重置测量游戏时间用的画面计数器
Graphics.frame_count = 0
# 生成各种游戏对像
$game_temp = Game_Temp.new
$game_system = Game_System.new
$game_switches = Game_Switches.new
$game_variables = Game_Variables.new
$game_self_switches = Game_SelfSwitches.new
$game_screen = Game_Screen.new
$game_actors = Game_Actors.new
$game_party = Game_Party.new
$game_troop = Game_Troop.new
$game_map = Game_Map.new
$game_player = Game_Player.new
# 设置初期同伴位置
$game_party.setup_starting_members
# 设置初期位置的地图
$game_map.setup($data_system.start_map_id)
# 主角向初期位置移动
$game_player.moveto($data_system.start_x, $data_system.start_y)
# 刷新主角
$game_player.refresh
# 执行地图设置的 BGM 与 BGS 的自动切换
$game_map.autoplay
# 刷新地图 (执行并行事件)
$game_map.update
# 切换地图画面
$scene = Scene_Map.new
end
#--------------------------------------------------------------------------
# ● 命令 : 继续
#--------------------------------------------------------------------------
def command_continue
# 继续无效的情况下
unless @continue_enabled
# 演奏无效 SE
$game_system.se_play($data_system.buzzer_se)
return
end
# 演奏确定 SE
$game_system.se_play($data_system.decision_se)
# 切换到读档画面
$scene = Scene_Load.new
end
#--------------------------------------------------------------------------
# ● 命令 : 退出
#--------------------------------------------------------------------------
def command_shutdown
# 演奏确定 SE
$game_system.se_play($data_system.decision_se)
# BGM、BGS、ME 的淡入淡出
Audio.bgm_fade(800)
Audio.bgs_fade(800)
Audio.me_fade(800)
# 退出
$scene = nil
end
#--------------------------------------------------------------------------
# ● 战斗测试
#--------------------------------------------------------------------------
def battle_test
# 载入数据库 (战斗测试用)
$data_actors = load_data("Data/BT_Actors.rxdata")
$data_classes = load_data("Data/BT_Classes.rxdata")
$data_skills = load_data("Data/BT_Skills.rxdata")
$data_items = load_data("Data/BT_Items.rxdata")
$data_weapons = load_data("Data/BT_Weapons.rxdata")
$data_armors = load_data("Data/BT_Armors.rxdata")
$data_enemies = load_data("Data/BT_Enemies.rxdata")
$data_troops = load_data("Data/BT_Troops.rxdata")
$data_states = load_data("Data/BT_States.rxdata")
$data_animations = load_data("Data/BT_Animations.rxdata")
$data_tilesets = load_data("Data/BT_Tilesets.rxdata")
$data_common_events = load_data("Data/BT_CommonEvents.rxdata")
$data_system = load_data("Data/BT_System.rxdata")
# 重置测量游戏时间用的画面计数器
Graphics.frame_count = 0
# 生成各种游戏对像
$game_temp = Game_Temp.new
$game_system = Game_System.new
$game_switches = Game_Switches.new
$game_variables = Game_Variables.new
$game_self_switches = Game_SelfSwitches.new
$game_screen = Game_Screen.new
$game_actors = Game_Actors.new
$game_party = Game_Party.new
$game_troop = Game_Troop.new
$game_map = Game_Map.new
$game_player = Game_Player.new
# 设置战斗测试用同伴
$game_party.setup_battle_test_members
# 设置队伍 ID、可以逃走标志、战斗背景
$game_temp.battle_troop_id = $data_system.test_troop_id
$game_temp.battle_can_escape = true
$game_map.battleback_name = $data_system.battleback_name
# 演奏战斗开始 BGM
$game_system.se_play($data_system.battle_start_se)
# 演奏战斗 BGM
$game_system.bgm_play($game_system.battle_bgm)
# 切换到战斗画面
$scene = Scene_Battle.new
end
end

复制代码

帐号		自动登录	找回密码
密码			注册会员

[已经解决] 图片标题修改求思路求方法......

评分

点评

点评

评分

短篇十战斗者组别冠军

开拓者

贵宾

短篇九勇士组亚军