[S.TECH]分层地图编辑 v0.9

布里蓝 · 发表于 2013-10-3 23:22:35

好东西，收了
以前某个分层脚本因为和区域扩充冲突，所以才不得放弃，终于遇到没有冲突的了

Sion · 发表于 2013-10-8 19:09:00

非常好的。
楼主能不能告诉一下VA这个自动元件和活动元件的 id 计算方法。

六百木 · 发表于 2013-10-9 02:15:07

本帖最后由六百木于 2013-10-9 06:49 编辑

Sion 发表于 2013-10-8 19:09
非常好的。
楼主能不能告诉一下VA这个自动元件和活动元件的 id 计算方法。 ...

这个东西的实现不需要自动元件算法了..毕竟只是复制整合地图数据。不过下面是6R上关于自动元件的参考资料：

胃的自动元件说明文档：
http://ftp.66rpg.com/WEB_PLUS/UP ... %AF%B4%E6%98%8E.doc

yangff的RM VX/ACE 自动元件算法分析与讨论：
http://rpg.blue/forum.php?mod=viewthread&tid=222020

之前写的一个设置自动元件ID的脚本，未经大量测试并且有重复代码：
（本来分层编辑是想直接做一个编辑器的，不过工作量太大，还是利用默认编辑器这种笨方法比较实际）

#encoding:utf-8
#==============================================================================
# ■ Tile
#------------------------------------------------------------------------------
# 　代表地图元件
#==============================================================================
class Tile
#--------------------------------------------------------------------------
# ● 类方法：组、序号、形状=>ID
#--------------------------------------------------------------------------
def self.set_to_tile_id(set, index, shape = 0)
case set
when :A1
return 2048 + index * 48 + shape
when :A2
return 2816 + index * 48 + shape
when :A3
return 4352 + index * 48 + shape
when :A4
return 5888 + index * 48 + shape
when :A5
return 1536 + index
when :B
return index
when :C
return 256 + index
when :D
return 512 + index
when :E
return 768 + index
end
return 0
end
#--------------------------------------------------------------------------
# ● 类方法：ID=>组、序号、形状
#--------------------------------------------------------------------------
def self.tile_id_to_set(id)
if id < 256
return :B, id, 0
elsif id < 512
return :C, id - 256, 0
elsif id < 768
return :D, id - 512, 0
elsif id < 1024
return :E, id - 768, 0
elsif id >= 1536 && id < 1664
return :A5, id - 1536, 0
elsif id >= 2048 && id < 2816
return :A1, (id - 2048) / 48, (id - 2048) % 48
elsif id >= 2816 && id < 4352
return :A2, (id - 2816) / 48, (id - 2816) % 48
elsif id >= 4352 && id < 5888
return :A3, (id - 4352) / 48, (id - 4352) % 48
elsif id >= 5888
return :A4, (id - 5888) / 48, (id - 5888) % 48
end
p "WARNING: Invalid id: #{id}"
return :B, 0, 0
end
#--------------------------------------------------------------------------
# ● 类方法：转换成Tile对象
#--------------------------------------------------------------------------
def self.to_tile(t)
if t.is_a?(Tile)
return t
else
return Tile.new(t)
end
end
#--------------------------------------------------------------------------
# ● 类方法：转换成tile_id
#--------------------------------------------------------------------------
def self.to_tile_id(t)
if t.is_a?(Tile)
return t.tile_id
else
return t
end
end
#--------------------------------------------------------------------------
# ● 类方法：返回图块组中的图块数量
#--------------------------------------------------------------------------
def self.tile_count(set)
case set
when :A1
return 16
when :A2
return 32
when :A3
return 32
when :A4
return 24
when :A5
return 128
when :B, :C, :D, :E
return 256
end
p "WARNING: cannot find tile number for #{set}"
return 0
end
#--------------------------------------------------------------------------
# ● 初始化
# 参数为tile_id或set,index[,shape]
# 参数为空的话tile_id为0
#--------------------------------------------------------------------------
def initialize(*args)
if args.size == 0
self.tile_id = 0
elsif args.size == 1
self.tile_id = args.first
elsif args.size == 2
@set, [url=home.php?mod=space&uid=370741]@Index[/url] = *args
@shape = 0
@tile_id = Tile.set_to_tile_id(@set, @index, @shape)
elsif args.size == 3
@set, @index, @shape = *args
@shape = sample_shape if @shape == :sample
@tile_id = Tile.set_to_tile_id(@set, @index, @shape)
else
raise ArgumentError
end
end
#--------------------------------------------------------------------------
# ● 属性
#--------------------------------------------------------------------------
attr_reader :set, :index, :shape, :tile_id
def set=(n)
@set = n
@tile_id = Tile.set_to_tile_id(@set, @index, @shape)
end
def index=(n)
@index = n
@tile_id = Tile.set_to_tile_id(@set, @index, @shape)
end
def shape=(n)
@shape = n
@tile_id = Tile.set_to_tile_id(@set, @index, @shape)
end
def tile_id=(n)
@tile_id = n
@set, @index, @shape = Tile.tile_id_to_set(@tile_id)
end
#--------------------------------------------------------------------------
# ● 元件类型
# :type_2x3 :type_2x2 :type_2x1
#--------------------------------------------------------------------------
def type
case @set
when :A1
if @index <= 3
return :type_2x3
else
if @index % 2 == 0
return :type_2x3
else
return :type_2x1
end
end
when :A2
return :type_2x3
when :A3
return :type_2x2
when :A4
if (@index / 8) % 2 == 0
return :type_2x3
else
return :type_2x2
end
end
return :type_1x1
end
#--------------------------------------------------------------------------
# ● 是否属于同一个元件
#-------------------------------------------------------------------------
def same_tile?(other)
return @set == other.set && @index == other.index
end
#--------------------------------------------------------------------------
# ● 计算形状
#-------------------------------------------------------------------------
def calculate_shape(surround)
case type
when :type_2x3
return autotile_2x3_shape(surround)
when :type_2x2
return autotile_2x2_shape(surround)
when :type_2x1
return autotile_2x1_shape(surround)
when :type_1x1
return 0
end
p "WARNING: cannot find shape for set #{@set} index #{@index} surround 0b#{surround.to_s(2)}"
return 0
end
#--------------------------------------------------------------------------
# ● 返回图块缩略图形状
#--------------------------------------------------------------------------
def sample_shape
case type
when :type_2x3
return 46
when :type_2x2
return 15
when :type_2x1
return 3
end
return 0
end
#--------------------------------------------------------------------------
# ● 辅佐方法
#--------------------------------------------------------------------------
protected
#--------------------------------------------------------------------------
# ● 2x3自动元件形状
#--------------------------------------------------------------------------
def autotile_2x3_shape(surround)
# 如果上、下、左或右方向没有相邻同样图块的话，无视对应方向的两个角
surround &= 0b01011111 if surround | 0b10111111 == 0b10111111
surround &= 0b01111011 if surround | 0b11101111 == 0b11101111
surround &= 0b11011110 if surround | 0b11110111 == 0b11110111
surround &= 0b11111010 if surround | 0b11111101 == 0b11111101
return AUTOTILE_2X3_SHAPES[surround]
end
#--------------------------------------------------------------------------
# ● 2x2自动元件形状
#--------------------------------------------------------------------------
def autotile_2x2_shape(surround)
# 削去四个角
surround &= 0b01011010
return AUTOTILE_2X2_SHAPES[surround]
end
#--------------------------------------------------------------------------
# ● 2x1自动元件形状
#--------------------------------------------------------------------------
def autotile_2x1_shape(surround)
# 削去上下两条边
surround &= 0b00011000
return AUTOTILE_2X1_SHAPES[surround]
end
#--------------------------------------------------------------------------
# ● 辅佐常量
#--------------------------------------------------------------------------
#--------------------------------------------------------------------------
# ● 2x3自动元件形状
#--------------------------------------------------------------------------
AUTOTILE_2X3_SHAPES = {
0b11111111 => 0,
0b01111111 => 1,
0b11011111 => 2,
0b01011111 => 3,
0b11111110 => 4,
0b01111110 => 5,
0b11011110 => 6,
0b01011110 => 7,
0b11111011 => 8,
0b01111011 => 9,
0b11011011 => 10,
0b01011011 => 11,
0b11111010 => 12,
0b01111010 => 13,
0b11011010 => 14,
0b01011010 => 15,
0b01101011 => 16, #16 左 8, 9, 4, 5
0b01001011 => 17, #17 右上+左 8, 17, 4, 5
0b01101010 => 18, #18 右下+左 8, 9, 4, 19
0b01001010 => 19, #19 左+右上+右下 8, 17, 4, 19
0b00011111 => 20, #20 上 2, 1, 6, 5
0b00011110 => 21, #21 右下+上 2, 1, 6, 19
0b00011011 => 22, #22 左下+上 2, 1, 18, 5
0b00011010 => 23, #23 上+左下+右下 2, 1, 18, 19
0b11010110 => 24, #24 右 10, 11, 6, 7
0b11010010 => 25, #25 左下+右 10, 11, 18, 7
0b01010110 => 26, #26 左上+右 16, 11, 6, 7
0b01010010 => 27, #27 右+左上+左下 16, 11, 18, 7
0b11111000 => 28, #28 下 10, 9, 14, 13
0b01111000 => 29, #29 左上+下 16, 9, 14, 13
0b11011000 => 30, #30 右上+下 10, 17, 14, 13
0b01011000 => 31, #31 下+左上+右上 16, 17, 14, 13
0b01000010 => 32, #32 右+左 8, 11, 4, 7
0b00011000 => 33, #33 上+下 2, 1, 14, 13
0b00001011 => 34, #34 上+左 0, 1, 4, 5
0b00001010 => 35, #35 右下+上+左 0, 1, 4, 19
0b00010110 => 36, #36 上+右 2, 3, 6, 7
0b00010010 => 37, #37 左下+上+右 2, 3, 18, 7
0b11010000 => 38, #38 右+下 10, 11, 14, 15
0b01010000 => 39, #39 左上+右+下 16, 11, 14, 15
0b01101000 => 40, #40 下+左 8, 9, 12, 13
0b01001000 => 41, #41 右上+左+下 8, 17, 12, 13
0b00000010 => 42, #42 -下 0, 3, 8, 11
0b00001000 => 43, #43 -右 0, 1, 12, 13
0b01000000 => 44, #44 -上 4, 7, 12, 15
0b00010000 => 45, #45 -左 2, 3, 14, 15
0b00000000 => 46, #46 all 0, 3, 12, 15
}
AUTOTILE_2X3_SHAPES.default = 0
#--------------------------------------------------------------------------
# ● 2x1自动元件形状
#--------------------------------------------------------------------------
AUTOTILE_2X1_SHAPES = {
0b00011000 => 0, #0 -all 2, 1, 6, 5
0b00001000 => 1, #1 左 0, 1, 4, 5
0b00010000 => 2, #2 右 2, 3, 6, 7
0b00000000 => 3, #3 all 0, 3, 4, 7
}
AUTOTILE_2X1_SHAPES.default = 0
#--------------------------------------------------------------------------
# ● 2x2自动元件形状
#--------------------------------------------------------------------------
AUTOTILE_2X2_SHAPES = {
0b01011010 => 0, #0 -all 10, 9, 6, 5
0b01001010 => 1, #1 左 8, 9, 4, 5
0b00011010 => 2, #2 上 2, 1, 6, 5
0b00001010 => 3, #3 左+上 0, 1, 4, 5
0b01010010 => 4, #4 右 10, 11, 6, 7
0b01000010 => 5, #5 左+右 8, 11, 4, 7
0b00010010 => 6, #6 上+右 2, 3, 6, 7
0b00000010 => 7, #7 左+上+右 0, 3, 8, 11
0b01011000 => 8, #8 下 10, 9, 14, 13
0b01001000 => 9, #9 左+下 8, 9, 12, 13
0b00011000 => 10, #10 上+下 2, 1, 14, 13
0b00001000 => 11, #11 上+左+下 0, 1, 12, 13
0b01010000 => 12, #12 右+下 10, 11, 14, 15
0b01000000 => 13, #13 左+右+下 4, 7, 12, 15
0b00010000 => 14, #14 上+右+下 2, 3, 14, 15
0b00000000 => 15, #15 all 0, 3, 12, 15
}
AUTOTILE_2X2_SHAPES.default = 0
end
#==============================================================================
# ■ TileTable
#------------------------------------------------------------------------------
# 　地图操作模块，include到Table
#==============================================================================
module TileTable
#--------------------------------------------------------------------------
# ● 写入自动元件
# tile可以是Tile实例或整数ID
# z 0~2为层1～3，3为阴影层和区域，见def region_id
# :out_of_map_as_neighbor 超出地图范围视为同类自动元件，默认true
# :update_surround 是否更新周围自动元件的形状，默认true
#--------------------------------------------------------------------------
def set_autotile(x, y, z, tile, options={})
return if !in_map?(x, y)
set_default_options(options)
# 转换
tile = Tile.to_tile(tile)
# 获取第一部分需要更新的元件
if options[:update_surround]
coords_to_update = get_related_coords(x, y, z, get_tile(x, y, z))
else
coords_to_update = [[x, y]]
end
# 写入元件（形状未调整）
set_tile(x, y, z, tile)
# 获取第二部分需要更新的元件
if options[:update_surround]
coords_to_update |= get_related_coords(x, y, z, tile)
end
# 更新列表中的所有元件
coords_to_update.each do |xy|
update_autotile_shape(*xy, z, options)
end
end
#--------------------------------------------------------------------------
# ● 批量写入自动元件
#--------------------------------------------------------------------------
def set_autotiles(coords, z, tile, options=Hash.new(true))
set_default_options(options)
# 转换
tile = Tile.to_tile(tile)
# 获取第一部分需要更新的元件
coords_to_update = []
coords.each do |xy|
next if !in_map?(*xy)
coords_to_update |= get_related_coords(*xy, z, get_tile(*xy, z))
end
# 写入元件（形状未调整）
set_tiles(coords, z, tile)
# 获取第二部分需要更新的元件
coords.each do |xy|
next if !in_map?(*xy)
coords_to_update |= get_related_coords(*xy, z, tile)
end
# 更新列表中的所有元件
coords_to_update.each do |xy|
update_autotile_shape(*xy, z, options)
end
end
#--------------------------------------------------------------------------
# ● 写入元件
#--------------------------------------------------------------------------
def set_tile(x, y, z, tile)
return if !in_map?(x, y)
self[x, y, z] = Tile.to_tile_id(tile)
end
#--------------------------------------------------------------------------
# ● 批量写入元件
#--------------------------------------------------------------------------
def set_tiles(coords, z, tile)
coords.each {|xy| set_tile(*xy, z, tile)}
end
#--------------------------------------------------------------------------
# ● 取得元件
#--------------------------------------------------------------------------
def get_tile(x, y, z)
return if !in_map?(x, y)
return Tile.new(self[x, y, z])
end
#--------------------------------------------------------------------------
# ● 坐标是否在地图范围内
#--------------------------------------------------------------------------
def in_map?(x, y)
return x >= 0 && x < xsize && y >= 0 && y < ysize
end
#--------------------------------------------------------------------------
# ● 辅佐方法
#--------------------------------------------------------------------------
protected
#--------------------------------------------------------------------------
# ● 设置默认选项
#--------------------------------------------------------------------------
def set_default_options(options)
if options[:out_of_map_as_neighbor] == nil
options[:out_of_map_as_neighbor] = true
end
if options[:update_surround] == nil
options[:update_surround] = true
end
end
#--------------------------------------------------------------------------
# ● 返回相关坐标
#--------------------------------------------------------------------------
def get_related_coords(x, y, z, tile)
coords = []
case tile.type
when :type_2x3 # 正方形
for _x in x - 1..x + 1
for _y in y - 1..y + 1
coords.push([_x, _y]) if same_tile?(_x, _y, z, tile)
end
end
when :type_2x2 # 需要扩展整片墙壁
expand_coords(x, y, z, tile, coords)
when :type_2x1 # 十字形
[[x, y], [x-1, y], [x+1, y], [x, y-1], [x, y+1]].each do |xy|
coords.push(xy) if same_tile?(*xy, z, tile)
end
end
return coords
end
#--------------------------------------------------------------------------
# ● 是否同一个元件
#--------------------------------------------------------------------------
def same_tile?(x, y, z, tile)
if (target = get_tile(x, y, z)) == nil
return false
end
return target.same_tile?(tile)
end
#--------------------------------------------------------------------------
# ● 是否相邻
# 超出地图范围也视为相邻
#--------------------------------------------------------------------------
def neighbor?(x, y, z, tile)
if (target = get_tile(x, y, z)) == nil
return true
end
return target.same_tile?(tile)
end
#--------------------------------------------------------------------------
# ● 递归扩展坐标
#--------------------------------------------------------------------------
def expand_coords(x, y, z, tile, coords)
return if !same_tile?(x, y, z, tile)
return if coords.include?([x, y])
coords.push([x, y])
[[x-1, y], [x+1, y], [x, y-1], [x, y+1]].each do |xy|
expand_coords(*xy, z, tile, coords)
end
end
#--------------------------------------------------------------------------
# ● 更新自动元件形状
#--------------------------------------------------------------------------
def update_autotile_shape(x, y, z, options = {})
return if !in_map?(x, y)
tile = get_tile(x, y, z)
surround = get_surround(tile, x, y, z, options)
tile.shape = tile.calculate_shape(surround)
set_tile(x, y, z, tile)
end
#--------------------------------------------------------------------------
# ● 返回周边情况
#-------------------------------------------------------------------------
def get_surround(tile, x, y, z, options = {})
result = 0
if tile.type == :type_2x1 || tile.type == :type_2x3
if options[:out_of_map_as_neighbor]
m = method(:neighbor?)
else
m = method(:same_tile?)
end
# ⑧方向
result |= 0b10000000 if m.call(x - 1, y - 1, z, tile)
result |= 0b01000000 if m.call(x, y - 1, z, tile)
result |= 0b00100000 if m.call(x + 1, y - 1, z, tile)
result |= 0b00010000 if m.call(x - 1, y, z, tile)
result |= 0b00001000 if m.call(x + 1, y, z, tile)
result |= 0b00000100 if m.call(x - 1, y + 1, z, tile)
result |= 0b00000010 if m.call(x, y + 1, z, tile)
result |= 0b00000001 if m.call(x + 1, y + 1, z, tile)
elsif tile.type == :type_2x2 #todo
# 上
# 超出地图范围的话视为没有邻接
result |= 0b01000000 if same_autotile?(tile, x, y - 1, z)
# 左和右
# 本列最上面的元件决定邻接情况
top_y = get_top_y(data, x, y, z)
result |= 0b00010000 if neighbor?(tile, x - 1, top_y, z)
result |= 0b00001000 if neighbor?(tile, x + 1, top_y, z)
# 下
# 不位于这面墙最下面的话视为有邻接
# 超出地图范围的话视为没有邻接
if in_map?(data, x, y + 1)
if same_autotile?(tile, x, y + 1, z)
result |= 0b00000010
else
bottom_y = y
_x = x - 1 # 检查左边
while same_autotile?(tile, _x, y, z) &&
get_top_y(data, _x, y, z) == top_y
_bottom_y = get_bottom_y(data, _x, y, z)
bottom_y = _bottom_y if _bottom_y > bottom_y
_x -= 1
end
_x = x + 1 # 检查右边
while same_autotile?(tile, _x, y, z) &&
get_top_y(data, _x, y, z) == top_y
_bottom_y = get_bottom_y(data, _x, y, z)
bottom_y = _bottom_y if _bottom_y > bottom_y
_x += 1
end
result |= 0b00000010 if bottom_y > y
end
end
end
return result
end
end
class Table
include TileTable
end
module Tileset
#--------------------------------------------------------------------------
# ● 返回图块组中的图块数量
#--------------------------------------------------------------------------
def self.tile_count(set)
case set
when :A1
return 16
when :A2
return 32
when :A3
return 32
when :A4
return 24
when :A5
return 128
when :B, :C, :D, :E
return 256
end
p "WARNING: cannot find tile number for #{set}"
return 0
end
#--------------------------------------------------------------------------
# ● 返回图块缩略图形状
#--------------------------------------------------------------------------
def self.sample_shape(set, index)
type = autotile_type(set, index)
case type
when :type_2x3
return 46
when :type_2x2
return 15
when :type_2x1
return 3
end
return 0
end
#--------------------------------------------------------------------------
# ● 辅佐方法
#--------------------------------------------------------------------------
#--------------------------------------------------------------------------
# ● 更新自动元件形状
#--------------------------------------------------------------------------
def self.update_autotile_shape(data, x, y, z)
return if !in_map?(data, x, y)
set, index = id_to_set(data[x, y, z])
surround = get_surround(data, set, index, x, y, z)
shape = get_shape(set, index, surround)
data[x, y, z] = set_to_id(set, index, shape)
end
#--------------------------------------------------------------------------
# ● 更新自动元件形状
#--------------------------------------------------------------------------
def self.update_select_autotile_shape(data, x, y, z)
return if !in_map?(data, x, y)
set, index = id_to_set(data[x, y, z])
surround = get_select_surround(data, set, index, x, y, z)
shape = get_shape(set, index, surround)
data[x, y, z] = set_to_id(set, index, shape)
end
#--------------------------------------------------------------------------
# ● 根据周围的自动元件获得形状
#--------------------------------------------------------------------------
def self.get_shape(set, index, surround)
type = autotile_type(set, index)
case type
when :type_2x3
return autotile_2x3_shape(surround)
when :type_2x2
return autotile_2x2_shape(surround)
when :type_2x1
return autotile_2x1_shape(surround)
when :not_autotile
return 0
end
p "WARNING: cannot find shape for set #{set} index #{index} surround 0b#{surround.to_s(2)}"
return 0
end
#--------------------------------------------------------------------------
# ● 是否自动元件
#--------------------------------------------------------------------------
def self.autotile?(id)
return autotile_id_type(id) != :not_autotile
end
#--------------------------------------------------------------------------
# ● 根据id返回自动元件类型
# :type_2x3 :type_2x2 :type_2x1
#--------------------------------------------------------------------------
def self.autotile_id_type(id)
set, index = id_to_set(id)
return autotile_type(set, index)
end
#--------------------------------------------------------------------------
# ● 返回自动元件类型
# :type_2x3 :type_2x2 :type_2x1
#--------------------------------------------------------------------------
def self.autotile_type(set, index)
case set
when :A1
if index <= 3
return :type_2x3
else
if index % 2 == 0
return :type_2x3
else
return :type_2x1
end
end
when :A2
return :type_2x3
when :A3
return :type_2x2
when :A4
if (index / 8) % 2 == 0
return :type_2x3
else
return :type_2x2
end
end
return :not_autotile
end
#--------------------------------------------------------------------------
# ● 返回周边情况
#-------------------------------------------------------------------------
def self.get_surround(data, set, index, x, y, z)
result = 0
type = autotile_type(set, index)
if type == :type_2x1 || type == :type_2x3
# ⑧方向
result |= 0b10000000 if neighbor?(data, set, index, x - 1, y - 1, z)
result |= 0b01000000 if neighbor?(data, set, index, x, y - 1, z)
result |= 0b00100000 if neighbor?(data, set, index, x + 1, y - 1, z)
result |= 0b00010000 if neighbor?(data, set, index, x - 1, y, z)
result |= 0b00001000 if neighbor?(data, set, index, x + 1, y, z)
result |= 0b00000100 if neighbor?(data, set, index, x - 1, y + 1, z)
result |= 0b00000010 if neighbor?(data, set, index, x, y + 1, z)
result |= 0b00000001 if neighbor?(data, set, index, x + 1, y + 1, z)
elsif type == :type_2x2
# 上
# 超出地图范围的话视为没有邻接
result |= 0b01000000 if same_autotile?(data, set, index, x, y - 1, z)
# 左和右
# 本列最上面的元件决定邻接情况
top_y = get_top_y(data, x, y, z)
result |= 0b00010000 if neighbor?(data, set, index, x - 1, top_y, z)
result |= 0b00001000 if neighbor?(data, set, index, x + 1, top_y, z)
# 下
# 不位于这面墙最下面的话视为有邻接
# 超出地图范围的话视为没有邻接
if in_map?(data, x, y + 1)
if same_autotile?(data, set, index, x, y + 1, z)
result |= 0b00000010
else
bottom_y = y
_x = x - 1 # 检查左边
while same_autotile?(data, set, index, _x, y, z) &&
get_top_y(data, _x, y, z) == top_y
_bottom_y = get_bottom_y(data, _x, y, z)
bottom_y = _bottom_y if _bottom_y > bottom_y
_x -= 1
end
_x = x + 1 # 检查右边
while same_autotile?(data, set, index, _x, y, z) &&
get_top_y(data, _x, y, z) == top_y
_bottom_y = get_bottom_y(data, _x, y, z)
bottom_y = _bottom_y if _bottom_y > bottom_y
_x += 1
end
result |= 0b00000010 if bottom_y > y
end
end
end
return result
end
#--------------------------------------------------------------------------
# ● 返回周边情况
#-------------------------------------------------------------------------
def self.get_select_surround(data, set, index, x, y, z)
result = 0
type = autotile_type(set, index)
if type == :type_2x1 || type == :type_2x3
# ⑧方向
result |= 0b10000000 if same_autotile?(data, set, index, x - 1, y - 1, z)
result |= 0b01000000 if same_autotile?(data, set, index, x, y - 1, z)
result |= 0b00100000 if same_autotile?(data, set, index, x + 1, y - 1, z)
result |= 0b00010000 if same_autotile?(data, set, index, x - 1, y, z)
result |= 0b00001000 if same_autotile?(data, set, index, x + 1, y, z)
result |= 0b00000100 if same_autotile?(data, set, index, x - 1, y + 1, z)
result |= 0b00000010 if same_autotile?(data, set, index, x, y + 1, z)
result |= 0b00000001 if same_autotile?(data, set, index, x + 1, y + 1, z)
return result
else
return get_surround(data, set, index, x, y, z)
end
end
#--------------------------------------------------------------------------
# ● 返回2x2元件列最上面的元件的y坐标
#-------------------------------------------------------------------------
def self.get_top_y(data, x, y, z)
set, index = id_to_set(data[x, y, z])
top_y = y
top_y -= 1 while same_autotile?(data, set, index, x, top_y - 1, z)
return top_y
end
#--------------------------------------------------------------------------
# ● 返回2x2元件列最下面的元件的y坐标
#-------------------------------------------------------------------------
def self.get_bottom_y(data, x, y, z)
set, index = id_to_set(data[x, y, z])
bottom_y = y
bottom_y += 1 while same_autotile?(data, set, index, x, bottom_y + 1, z)
return bottom_y
end
#--------------------------------------------------------------------------
# ● 邻接
# 超出地图范围的话视为邻接自动元件
#-------------------------------------------------------------------------
def self.neighbor?(data, set, index, x, y, z)
if !in_map?(data, x, y)
return true
end
return same_autotile?(data, set, index, x, y, z)
end
#--------------------------------------------------------------------------
# ● 坐标是否属于同一个自动元件
#-------------------------------------------------------------------------
def self.same_autotile?(data, set, index, x, y, z)
if !in_map?(data, x, y)
return false
end
set2, index2 = Tileset.id_to_set(data[x, y, z])
return set == set2 && index == index2
end
#--------------------------------------------------------------------------
# ● 坐标是否在地图范围内
#--------------------------------------------------------------------------
def self.in_map?(data, x, y)
return x >= 0 && x < data.xsize && y >= 0 && y < data.ysize
end
end
module RPG
class Tileset
def sets_in_use
sets = [:A1,:A2,:A3,:A4,:A5,:B,:C,:D,:E]
in_use = []
self.tileset_names.each_with_index do |name, i|
in_use.push(sets[i]) if !name.empty?
end
return in_use
end
end
end

复制代码

huayicomics · 发表于 2013-10-11 08:57:40

这个文件能打开，但是怎么用在别的文件呢,哎不会用诶

六百木 · 发表于 2013-10-12 01:05:55

huayicomics 发表于 2013-10-11 08:57
这个文件能打开，但是怎么用在别的文件呢,哎不会用诶

复制范例里的所有新增脚本到你的工程里面

或者

在范例里画好地图后把地图复制到你的工程里面

tseyik · 发表于 2013-10-19 01:40:49

其實VA有分层地图的脚本
レイヤーシステムforAce Ver1.23(最大5層)
http://librpg.zatunen.com/ace.html
マルチレイヤーシステム(最大無限層,レイヤーシステム的拡張版)
http://canarialt.blog.fc2.com/blog-entry-57.html

水壶里的阶梯 · 发表于 2013-12-19 14:28:35

确实是个好东西，mark一下

eve592370698 · 发表于 2014-3-7 16:16:36

这个工具看来挺实用的。不过好像编辑起来有点麻烦，要来回重启地图吧？

xingmot · 发表于 2014-3-7 18:26:38

提一个比较白痴的发现...

就是用这个图块在第二个[1]中进行清除时，会发生下图这样的情况：

六百木 · 发表于 2014-3-22 08:20:36

eve592370698 发表于 2014-3-7 16:16
这个工具看来挺实用的。不过好像编辑起来有点麻烦，要来回重启地图吧？

运行游戏的时候如果编辑器没有选中主地图就不需要重启
例如主地图是“[0]测试”，按三角形运行游戏的时候不要选中这张地图，模块运行成功后关闭游戏回到编辑器，切换到地图到“[0]测试”就会发现数据自动更新了。如果运行游戏的时候选中主地图的话，就需要重启编辑器才能看到数据更新

最后还是主楼那句话，“当然来回编辑分层地图也是十分蛋疼，所以如无必要，不要使用分层编辑。”

帐号		自动登录	找回密码
密码			注册会员

[RMVA发布] [S.TECH]分层地图编辑 v0.9

点评

评分

评分

贵宾