Project1»广场 › 技术讨论 › RPG Maker VX Ace 讨论区 › 改密码锁脚本的小问题

改密码锁脚本的小问题

查看数: 4284 | 评论数: 19 | 收藏 0

关灯 | 提示：支持键盘翻页<-左右->

帖子模式

Forever火

发布时间: 2014-8-20 12:45

正文摘要:

这个限时密码锁脚本目前只支持几个按键，窝自己改了下，加了几个按键，结果好像不行，本人只是初学脚本，窝绝不是伸手党，但是确实没看懂{:2_270:} 希望大大们能告诉我：1添加12以后的按键之后怎么搞；2时间限制怎 ...

余烬之中 发表于 2014-8-20 21:55:57

本帖最后由余烬之中于 2014-8-20 22:33 编辑

现在支持从A到Z的所有键加上Shift 再加上四个方向键

安装方法

首先删掉你原来的全键盘和连击键
然后把这个插进去
注意论坛代码

RUBY 代码复制

#===============================================================================
# +++ MOG - Chain Commands (v1.4) +++
#===============================================================================
# By Moghunter
# [url]http://www.atelier-rgss.com[/url]
#===============================================================================
# 拓展 By 火灰
# （位于 [url]https://rpg.blue[/url]）
# 添加了全键盘的支持
#===============================================================================
# Sistema de sequência de botões para ativar switchs.
#
# Serão necessárias as seguintes imagens. (Graphics/System)
#
# Chain_Cursor.png
# Chain_Command.png
# Chain_Layout.png
# Chain_Timer_Layout.png
# Chain_Timer_Meter.png
#
#===============================================================================
#
# Para ativar o script use o comando abaixo.  (*Call Script)
#
# chain_commands(ID)
#
# ID - Id da switch.
#
#===============================================================================
#==============================================================================
# ● Histórico (Version History)
#==============================================================================
# v 1.4 - Correção do crash aleatório.
# v 1.3 - Melhoria no sistema de dispose
# v 1.2 - Melhoria na codificação e correção de alguns glitches.
# v 1.1 - Animação de fade ao sair da cena de chain.
#       - Opção de definir a prioridade da hud na tela.
#==============================================================================
module MOG_CHAIN_COMMANDS
  #============================================================================
  # CHAIN_COMMAND = { SWITCH_ID => [COMMAND] }
  #
  # SWITCH_ID = ID da switch
  # COMMANDS = Defina aqui a sequência de botões.
  #            (Para fazer a sequência use os comandos abaixo)
  #
  # "Down" ,"Up" ,"Left" ,"Right" ,"Shift" ,以及所有其他的英文字母键
  #
  # Exemplo de utilização
  #
  # CHAIN_SWITCH_COMMAND = {
  # 25=>["Down","D","S","Right"],
  # 59=>["Down","Up","Left","Right","Shift","D","S","A","Z","X","Q","W"],
  # 80=>["Shift","D"]
  # }
  #============================================================================
  CHAIN_SWITCH_COMMAND = {
    11 => ["A","X","A"],
    12 => ("A".."Z").to_a + %w{Shift Right Left Down Up},
    5  => ["X","Right","Left","Z","Z"],
    7  => ["X","X","X","X","X"],
    6  => ["Left","Right","Left","Right","Left","Right","Q","Z","Up","A","S",
           "Down","D","Z","Right","Up","Up","Z","W","Left","Down","D","A","W"],
    8  => ["Up","Down","Left","Right","Z"]
  }
  #Duração para colocar os comandos. (A duração é multiplicado pela quantidade
  #de comandos) *60 = 1 sec
  #上面的连击链代表成功输入这些按键后会开启相应的开关
  CHAIN_INPUT_DURATION = 60
  #Som ao acertar.
  CHAIN_RIGHT_SE = "Chime1"
  #Som ao errar.
  CHAIN_WRONG_SE = "Buzzer1"
  #Switch que ativa o modo automático.
  CHAIN_AUTOMATIC_MODE_SWITCH_ID = 20
  #Definição da prioridade da hud na tela
  CHAIN_HUD_Z = 300
  KEYS = {}
  ("A".."Z").each_with_index{|k, i| KEYS[k] = i + 0x41}
  KEYS["SHIFT"] = 0x10; KEYS["LEFT"]  = 0x25; KEYS["RIGHT"] = 0x27
  KEYS["DOWN"]  = 0x28; KEYS["UP"]    = 0x26
end
#===============================================================================
# ■ Chain Commands
#===============================================================================
class Chain_Commands
  include MOG_CHAIN_COMMANDS
  #--------------------------------------------------------------------------
  # ● Initialize
  #--------------------------------------------------------------------------
  def initialize
    @action_id = $game_temp.chain_switch_id
    @chain_command = CHAIN_SWITCH_COMMAND[@action_id]
    @chain_command = ["?"] if @chain_command == nil
    duration = [[CHAIN_INPUT_DURATION, 1].max, 9999].min
    @timer_max = duration * @chain_command.size
    @timer = @timer_max
    @slide_time = [[60 / duration, 10].max, 60].min
    @change_time = 0
    @auto = $game_switches[CHAIN_AUTOMATIC_MODE_SWITCH_ID]
    [url=home.php?mod=space&uid=10462]@Com[/url] = 0
  end
  #--------------------------------------------------------------------------
  # ● Main
  #--------------------------------------------------------------------------
  def main
    dispose
    @background_sprite = Sprite.new
    @background_sprite.bitmap = SceneManager.background_bitmap2
    create_chain_command
    create_cusrsor
    create_layout
    create_meter
    create_text
    create_number
    Graphics.transition
    loop do
      Graphics.update
      Input.update
      update
      break if SceneManager.scene != self
    end
    dispose
  end
  #--------------------------------------------------------------------------
  # ● Create Cursor
  #--------------------------------------------------------------------------
  def create_cusrsor
    @fy_time = 0
    @fy = 0
    @com_index = 0
    @cursor = Sprite.new
    @cursor.bitmap = Cache.system("Chain_Cursor")
    @cursor.z = 4 + CHAIN_HUD_Z
    @cursor_space = ((@bitmap_cw + 5) * @chain_command.size) / 2
    if @chain_command.size <= 20
      @cursor.x = (544 / 2) - @cursor_space + @cursor_space * @com_index
    else
      @cursor.x = (544 / 2)
    end
    @cursor.y = (416 / 2) + 30
  end
  #--------------------------------------------------------------------------
  # ● Create Chain Command
  #--------------------------------------------------------------------------
  def create_chain_command
    @image = Cache.system("Chain_Command")
    width_max = ((@image.width / 32) + 5) * @chain_command.size
    @bitmap = Bitmap.new(width_max,@image.height * 2)
    @bitmap_cw = @image.width / 32
    @bitmap_ch = @image.height
    index = 0
    for i in @chain_command
      command_list_check(i)
      bitmap_src_rect = Rect.new(@com * @bitmap_cw, 0, @bitmap_cw, @bitmap_ch)
      if index == 0
        @bitmap.blt(index * (@bitmap_cw + 5) , 0, @image, bitmap_src_rect)
      else
        @bitmap.blt(index * (@bitmap_cw + 5) , @bitmap_ch, @image,
        bitmap_src_rect)
      end
      index += 1
    end
    @sprite = Sprite.new
    @sprite.bitmap = @bitmap
    if @chain_command.size <= 15
      @sprite.x = (544 / 2) - ((@bitmap_cw + 5) * @chain_command.size) / 2
      @new_x = 0
    else
      @sprite.x = (544 / 2)
      @new_x = @sprite.x
    end
    @sprite.y = (416 / 2) + 30  - @bitmap_ch  - 15
    @sprite.z = 3 + CHAIN_HUD_Z
    @sprite.zoom_x = 1.5
    @sprite.zoom_y = 1.5
  end
  #--------------------------------------------------------------------------
  # * create_layout
  #--------------------------------------------------------------------------
  def create_layout
    @back = Plane.new
    @back.bitmap = Cache.system("Chain_Layout")
    @back.z = 0
    @layout = Sprite.new
    @layout.bitmap = Cache.system("Chain_Timer_Layout")
    @layout.z = 1 + CHAIN_HUD_Z
    @layout.x = 160
    @layout.y = 150
  end
  #--------------------------------------------------------------------------
  # * create_meter
  #--------------------------------------------------------------------------
  def create_meter
    @meter_flow = 0
    @meter_image = Cache.system("Chain_Timer_Meter")
    @meter_bitmap = Bitmap.new(@meter_image.width,@meter_image.height)
    @meter_range = @meter_image.width / 3
    @meter_width = @meter_range * @timer / @timer_max
    @meter_height = @meter_image.height
    @meter_src_rect = Rect.new(@meter_range, 0, @meter_width, @meter_height)
    @meter_bitmap.blt(0,0, @meter_image, @meter_src_rect)
    @meter_sprite = Sprite.new
    @meter_sprite.bitmap = @meter_bitmap
    @meter_sprite.z = 2 + CHAIN_HUD_Z
    @meter_sprite.x = 220
    @meter_sprite.y = 159
    update_flow
  end
  #--------------------------------------------------------------------------
  # ● Create Text
  #--------------------------------------------------------------------------
  def create_text
    @text = Sprite.new
    @text.bitmap = Bitmap.new(200,32)
    @text.z = 2 + CHAIN_HUD_Z
    @text.bitmap.font.name = "Georgia"
    @text.bitmap.font.size = 25
    @text.bitmap.font.bold = true
    @text.bitmap.font.italic = true
    @text.bitmap.font.color.set(255, 255, 255,220)
    @text.x = 230
    @text.y = 100
  end
  #--------------------------------------------------------------------------
  # ● Create Number
  #--------------------------------------------------------------------------
  def create_number
    @combo = 0
    @number = Sprite.new
    @number.bitmap = Bitmap.new(200,64)
    @number.z = 2 + CHAIN_HUD_Z
    @number.bitmap.font.name = "Arial"
    @number.bitmap.font.size = 24
    @number.bitmap.font.bold = true
    @number.bitmap.font.color.set(0, 255, 255,200)
    @number.bitmap.draw_text(0, 0, 200, 32, "Ready",1)
    @number.x = 30
    @number.y = 100
  end
  #--------------------------------------------------------------------------
  # ● Pre Dispose
  #--------------------------------------------------------------------------
  def exit
    loop do
      Graphics.update
      @sprite.x += 5
      @layout.x -= 5
      @meter_sprite.x -= 5
      @text.x -= 2
      @text.opacity -= 5
      @sprite.opacity -= 5
      @layout.opacity -= 5
      @meter_sprite.opacity -= 5
      @number.opacity -= 5
      @back.opacity -= 5
      @cursor.visible = false
      break if @sprite.opacity == 0
    end
    SceneManager.call(Scene_Map)
  end
  #--------------------------------------------------------------------------
  # ● Dispose
  #--------------------------------------------------------------------------
  def dispose
    return if @layout == nil
    Graphics.freeze
    @background_sprite.bitmap.dispose
    @background_sprite.dispose
    @bitmap.dispose
    @sprite.bitmap.dispose
    @sprite.dispose
    @cursor.bitmap.dispose
    @cursor.dispose
    @meter_image.dispose
    @meter_bitmap.dispose
    @meter_sprite.bitmap.dispose
    @meter_sprite.dispose
    @layout.bitmap.dispose
    @layout.dispose
    @layout = nil
    @back.bitmap.dispose
    @back.dispose
    @text.bitmap.dispose
    @text.dispose
    @number.bitmap.dispose
    @number.dispose
    @image.dispose
  end
  #--------------------------------------------------------------------------
  # ● Update
  #--------------------------------------------------------------------------
  def update
    update_command
    update_cursor_slide
    update_flow
    update_change_time
  end
  #--------------------------------------------------------------------------
  # ● Change_Time
  #--------------------------------------------------------------------------
  def update_change_time
    return unless @auto
    @change_time += 1
    check_command(-1) if @change_time >= CHAIN_INPUT_DURATION - 1
  end
  #--------------------------------------------------------------------------
  # ● Update Flow
  #--------------------------------------------------------------------------
  def update_flow
    @timer -= 1
    @meter_sprite.bitmap.clear
    @meter_width = @meter_range * @timer / @timer_max
    @meter_src_rect = Rect.new(@meter_flow, 0, @meter_width, @meter_height)
    @meter_bitmap.blt(0,0, @meter_image, @meter_src_rect)
    @meter_flow += 20
    @meter_flow = 0 if @meter_flow >= @meter_image.width - @meter_range
    wrong_command if @timer == 0 and @auto == false
  end
  #--------------------------------------------------------------------------
  # ● Update Command
  #--------------------------------------------------------------------------
  def update_command
    return if @auto
    KEYS.each{|key,value| check_command(key) if Kboard.trigger?(value)}
  end
  #--------------------------------------------------------------------------
  # ● command_list_check
  #--------------------------------------------------------------------------
  def command_list_check(command)
    command.upcase!
    @com = ("A".."Z").to_a.index(command)
    @com ||= 26 + (_ = %w{SHIFT RIGHT LEFT DOWN UP}.index(command)) ? _ : 5
  end
  #--------------------------------------------------------------------------
  # ● check_command
  #--------------------------------------------------------------------------
  def check_command(com)
    index = 0
    if com != -1
      right_input = false
      for i in @chain_command
        if index == @com_index
          right_input = true if @chain_command[index] == com
        end
        index += 1
      end
    else
      @change_time = 0
      right_input = true
    end
    if right_input
      refresh_number
      next_command
    else
      wrong_command
    end
  end
  #--------------------------------------------------------------------------
  # ● Next Command
  #--------------------------------------------------------------------------
  def next_command
    @com_index += 1
    Audio.se_play("Audio/SE/" + CHAIN_RIGHT_SE, 100, 100)
    if @com_index == @chain_command.size
      $game_switches[@action_id] = true
      exit
      $game_map.need_refresh = true
    end
    refresh_command
    refresh_text(0)
  end
  #--------------------------------------------------------------------------
  # ● wrong_command
  #--------------------------------------------------------------------------
  def wrong_command
    Audio.se_play("Audio/SE/" + CHAIN_WRONG_SE, 100, 100)
    refresh_text(1)
    exit
    $game_player.jump(0,0)
  end
  #--------------------------------------------------------------------------
  # ● Refresh Command
  #--------------------------------------------------------------------------
  def refresh_command
    @sprite.bitmap.clear
    index = 0
    for i in @chain_command
      command_list_check(i)
      bitmap_src_rect = Rect.new(@com * @bitmap_cw, 0, @bitmap_cw, @bitmap_ch)
      if @com_index == index
        @bitmap.blt(index * (@bitmap_cw + 5) , 0, @image, bitmap_src_rect)
      else
        @bitmap.blt(index * (@bitmap_cw + 5) , @bitmap_ch,
        @image, bitmap_src_rect)
      end
      index += 1
    end
    if @chain_command.size > 15
      @new_x = (544 / 2) - ((@bitmap_cw + 5) * @com_index)
    else
      @cursor.x = (544 / 2) - @cursor_space + ((@bitmap_cw + 5) * @com_index)
    end
  end
  #--------------------------------------------------------------------------
  # ● Refresh Text
  #--------------------------------------------------------------------------
  def refresh_text(type)
    @text.bitmap.clear
    if type == 0
      if @com_index == @chain_command.size
        @text.bitmap.font.color.set(55, 255, 55,220)
        @text.bitmap.draw_text(0, 0, 200, 32, "Perfect!",1)
      else
        @text.bitmap.font.color.set(55, 155, 255,220)
        @text.bitmap.draw_text(0, 0, 200, 32, "Success!",1)
      end
    else
      @text.bitmap.font.color.set(255, 155, 55,220)
      if @timer == 0
        @text.bitmap.draw_text(0, 0, 200, 32, "Time Limit!",1)
      else
        @text.bitmap.draw_text(0, 0, 200, 32, "Fail!",1)
      end
    end
    @text.x = 230
    @text.opacity = 255
  end
  #--------------------------------------------------------------------------
  # ● Refresh Number
  #--------------------------------------------------------------------------
  def refresh_number
    @combo += 1
    @number.bitmap.clear
    @number.bitmap.font.size = 34
    @number.bitmap.draw_text(0, 0, 200, 32, @combo.to_s,1)
    @number.opacity = 255
    @number.zoom_x = 2
    @number.zoom_y = 2
  end
  #--------------------------------------------------------------------------
  # ● Update Cursor Slide
  #--------------------------------------------------------------------------
  def update_cursor_slide
    @sprite.zoom_x -= 0.1 if @sprite.zoom_x > 1
    @sprite.zoom_y -= 0.1 if @sprite.zoom_y > 1
    @text.x -= 2 if @text.x > 210
    @text.opacity -= 5 if @text.opacity > 0
    @sprite.x -= @slide_time if @sprite.x > @new_x and @chain_command.size > 15
    if @number.zoom_x > 1
      @number.zoom_x -= 0.1
      @number.zoom_y -= 0.1
    end
    if @fy_time > 15
      @fy += 1
    elsif @fy_time > 0
      @fy -= 1
    else
      @fy = 0
      @fy_time = 30
    end
    @fy_time -= 1
    @cursor.oy = @fy
  end
end
#==============================================================================
# ■ Game Temp
#==============================================================================
class Game_Temp
  attr_accessor :chain_switch_id
  #--------------------------------------------------------------------------
  # ● Initialize
  #--------------------------------------------------------------------------
  alias mog_chain_commands_initialize initialize
  def initialize
    @chain_switch_id = 0
    mog_chain_commands_initialize
  end
end
#==============================================================================
# ■ Game_Interpreter
#==============================================================================
class Game_Interpreter
  #--------------------------------------------------------------------------
  # ● Chain Commands
  #--------------------------------------------------------------------------
  def chain_commands(switch_id = 0)
    return if switch_id <= 0
    $game_temp.chain_switch_id = switch_id
    SceneManager.call(Chain_Commands)
    wait(1)
  end
end
#===============================================================================
# ■ SceneManager
#===============================================================================
class << SceneManager
  @background_bitmap2 = nil
  #--------------------------------------------------------------------------
  # ● Snapshot For Background2
  #--------------------------------------------------------------------------
  def snapshot_for_background2
    @background_bitmap2.dispose if @background_bitmap2
    @background_bitmap2 = Graphics.snap_to_bitmap
  end
  #--------------------------------------------------------------------------
  # ● Background Bitmap2
  #--------------------------------------------------------------------------
  def background_bitmap2
    @background_bitmap2
  end
end
#===============================================================================
# ■ Scene Map
#===============================================================================
class Scene_Map < Scene_Base
  #--------------------------------------------------------------------------
  # ● Terminate
  #--------------------------------------------------------------------------
  alias mog_chain_commands_terminate terminate
  def terminate
    SceneManager.snapshot_for_background2
    mog_chain_commands_terminate
  end
end
$mog_rgss3_chain_commands = true
#============================================================================
# ■ Keyboard Script
#----------------------------------------------------------------------------
#    By: 灼眼的夏娜
#  整理: 火灰
#----------------------------------------------------------------------------
# 本脚本来自 rm.66RPG.com，使用和转载请保留此信息
#==============================================================================
module Kboard
  module_function
  @R_Key_Hash = {}
  @R_Key_Repeat = {}
  GetKeyState = Win32API.new("user32","GetAsyncKeyState",['I'],'I')
  def press?(rkey)
    return GetKeyState.call(rkey) != 0
  end
  def repeat?(rkey)
    result = GetKeyState.call(rkey)
    if result != 0
      if @R_Key_Repeat[rkey].nil?
        @R_Key_Repeat[rkey] = 0
        return true
      end
      @R_Key_Repeat[rkey] += 1
    else
      @R_Key_Repeat[rkey] = nil
      @R_Key_Hash[rkey] = 0
    end
    if !@R_Key_Repeat[rkey].nil? and @R_Key_Repeat[rkey] > 4
      @R_Key_Repeat[rkey] = 0
      return true
    else
      return false
    end
  end
  def trigger?(rkey)
    result = GetKeyState.call(rkey)
    if @R_Key_Hash[rkey] == 1 and result != 0
      return false
    end
    if result != 0
      @R_Key_Hash[rkey] = 1
      return true
    else
      @R_Key_Hash[rkey] = 0
      return false
    end
  end
end

#===============================================================================


# +++ MOG - Chain Commands (v1.4) +++


#===============================================================================


# By Moghunter


# [url]http://www.atelier-rgss.com[/url]


#===============================================================================


# 拓展 By 火灰


# （位于 [url]https://rpg.blue[/url]）


# 添加了全键盘的支持


#===============================================================================


# Sistema de sequência de botões para ativar switchs.


#


# Serão necessárias as seguintes imagens. (Graphics/System)


#


# Chain_Cursor.png


# Chain_Command.png


# Chain_Layout.png


# Chain_Timer_Layout.png


# Chain_Timer_Meter.png


#


#===============================================================================


#


# Para ativar o script use o comando abaixo.  (*Call Script)


#


# chain_commands(ID)


#


# ID - Id da switch.


#


#===============================================================================


#==============================================================================


# ● Histórico (Version History)


#==============================================================================


# v 1.4 - Correção do crash aleatório.


# v 1.3 - Melhoria no sistema de dispose


# v 1.2 - Melhoria na codificação e correção de alguns glitches.


# v 1.1 - Animação de fade ao sair da cena de chain.


#       - Opção de definir a prioridade da hud na tela.


#==============================================================================


module MOG_CHAIN_COMMANDS


  #============================================================================


  # CHAIN_COMMAND = { SWITCH_ID => [COMMAND] }


  #


  # SWITCH_ID = ID da switch


  # COMMANDS = Defina aqui a sequência de botões.


  #            (Para fazer a sequência use os comandos abaixo)


  #


  # "Down" ,"Up" ,"Left" ,"Right" ,"Shift" ,以及所有其他的英文字母键


  #


  # Exemplo de utilização


  #


  # CHAIN_SWITCH_COMMAND = {


  # 25=>["Down","D","S","Right"],


  # 59=>["Down","Up","Left","Right","Shift","D","S","A","Z","X","Q","W"],


  # 80=>["Shift","D"]


  # }


  #============================================================================


  CHAIN_SWITCH_COMMAND = {


    11 => ["A","X","A"],


    12 => ("A".."Z").to_a + %w{Shift Right Left Down Up},


    5  => ["X","Right","Left","Z","Z"],


    7  => ["X","X","X","X","X"],


    6  => ["Left","Right","Left","Right","Left","Right","Q","Z","Up","A","S",


           "Down","D","Z","Right","Up","Up","Z","W","Left","Down","D","A","W"],


    8  => ["Up","Down","Left","Right","Z"]


  }


  #Duração para colocar os comandos. (A duração é multiplicado pela quantidade


  #de comandos) *60 = 1 sec


  #上面的连击链代表成功输入这些按键后会开启相应的开关


  CHAIN_INPUT_DURATION = 60


  #Som ao acertar.


  CHAIN_RIGHT_SE = "Chime1"


  #Som ao errar.


  CHAIN_WRONG_SE = "Buzzer1"


  #Switch que ativa o modo automático.


  CHAIN_AUTOMATIC_MODE_SWITCH_ID = 20


  #Definição da prioridade da hud na tela


  CHAIN_HUD_Z = 300


  KEYS = {}


  ("A".."Z").each_with_index{|k, i| KEYS[k] = i + 0x41}


  KEYS["SHIFT"] = 0x10; KEYS["LEFT"]  = 0x25; KEYS["RIGHT"] = 0x27


  KEYS["DOWN"]  = 0x28; KEYS["UP"]    = 0x26


end


#===============================================================================


# ■ Chain Commands


#===============================================================================


class Chain_Commands


  include MOG_CHAIN_COMMANDS


  #--------------------------------------------------------------------------


  # ● Initialize


  #--------------------------------------------------------------------------


  def initialize


    @action_id = $game_temp.chain_switch_id


    @chain_command = CHAIN_SWITCH_COMMAND[@action_id]


    @chain_command = ["?"] if @chain_command == nil


    duration = [[CHAIN_INPUT_DURATION, 1].max, 9999].min


    @timer_max = duration * @chain_command.size


    @timer = @timer_max


    @slide_time = [[60 / duration, 10].max, 60].min


    @change_time = 0


    @auto = $game_switches[CHAIN_AUTOMATIC_MODE_SWITCH_ID]


    [url=home.php?mod=space&uid=10462]@Com[/url] = 0


  end


  #--------------------------------------------------------------------------


  # ● Main


  #--------------------------------------------------------------------------


  def main


    dispose


    @background_sprite = Sprite.new


    @background_sprite.bitmap = SceneManager.background_bitmap2


    create_chain_command


    create_cusrsor


    create_layout


    create_meter


    create_text


    create_number


    Graphics.transition


    loop do


      Graphics.update


      Input.update


      update


      break if SceneManager.scene != self


    end


    dispose


  end


  #--------------------------------------------------------------------------


  # ● Create Cursor


  #--------------------------------------------------------------------------


  def create_cusrsor


    @fy_time = 0


    @fy = 0


    @com_index = 0


    @cursor = Sprite.new


    @cursor.bitmap = Cache.system("Chain_Cursor")


    @cursor.z = 4 + CHAIN_HUD_Z


    @cursor_space = ((@bitmap_cw + 5) * @chain_command.size) / 2


    if @chain_command.size <= 20


      @cursor.x = (544 / 2) - @cursor_space + @cursor_space * @com_index


    else


      @cursor.x = (544 / 2)


    end


    @cursor.y = (416 / 2) + 30


  end


  #--------------------------------------------------------------------------


  # ● Create Chain Command


  #--------------------------------------------------------------------------


  def create_chain_command


    @image = Cache.system("Chain_Command")


    width_max = ((@image.width / 32) + 5) * @chain_command.size


    @bitmap = Bitmap.new(width_max,@image.height * 2)


    @bitmap_cw = @image.width / 32


    @bitmap_ch = @image.height


    index = 0


    for i in @chain_command


      command_list_check(i)


      bitmap_src_rect = Rect.new(@com * @bitmap_cw, 0, @bitmap_cw, @bitmap_ch)


      if index == 0


        @bitmap.blt(index * (@bitmap_cw + 5) , 0, @image, bitmap_src_rect)


      else


        @bitmap.blt(index * (@bitmap_cw + 5) , @bitmap_ch, @image,


        bitmap_src_rect)


      end


      index += 1


    end


    @sprite = Sprite.new


    @sprite.bitmap = @bitmap


    if @chain_command.size <= 15


      @sprite.x = (544 / 2) - ((@bitmap_cw + 5) * @chain_command.size) / 2


      @new_x = 0


    else


      @sprite.x = (544 / 2)


      @new_x = @sprite.x


    end


    @sprite.y = (416 / 2) + 30  - @bitmap_ch  - 15


    @sprite.z = 3 + CHAIN_HUD_Z


    @sprite.zoom_x = 1.5


    @sprite.zoom_y = 1.5


  end


  #--------------------------------------------------------------------------


  # * create_layout


  #--------------------------------------------------------------------------


  def create_layout


    @back = Plane.new


    @back.bitmap = Cache.system("Chain_Layout")


    @back.z = 0


    @layout = Sprite.new


    @layout.bitmap = Cache.system("Chain_Timer_Layout")


    @layout.z = 1 + CHAIN_HUD_Z


    @layout.x = 160


    @layout.y = 150


  end


  #--------------------------------------------------------------------------


  # * create_meter


  #--------------------------------------------------------------------------


  def create_meter


    @meter_flow = 0


    @meter_image = Cache.system("Chain_Timer_Meter")


    @meter_bitmap = Bitmap.new(@meter_image.width,@meter_image.height)


    @meter_range = @meter_image.width / 3


    @meter_width = @meter_range * @timer / @timer_max


    @meter_height = @meter_image.height


    @meter_src_rect = Rect.new(@meter_range, 0, @meter_width, @meter_height)


    @meter_bitmap.blt(0,0, @meter_image, @meter_src_rect)


    @meter_sprite = Sprite.new


    @meter_sprite.bitmap = @meter_bitmap


    @meter_sprite.z = 2 + CHAIN_HUD_Z


    @meter_sprite.x = 220


    @meter_sprite.y = 159


    update_flow


  end


  #--------------------------------------------------------------------------


  # ● Create Text


  #--------------------------------------------------------------------------


  def create_text


    @text = Sprite.new


    @text.bitmap = Bitmap.new(200,32)


    @text.z = 2 + CHAIN_HUD_Z


    @text.bitmap.font.name = "Georgia"


    @text.bitmap.font.size = 25


    @text.bitmap.font.bold = true


    @text.bitmap.font.italic = true


    @text.bitmap.font.color.set(255, 255, 255,220)


    @text.x = 230


    @text.y = 100


  end


  #--------------------------------------------------------------------------


  # ● Create Number


  #--------------------------------------------------------------------------


  def create_number


    @combo = 0


    @number = Sprite.new


    @number.bitmap = Bitmap.new(200,64)


    @number.z = 2 + CHAIN_HUD_Z


    @number.bitmap.font.name = "Arial"


    @number.bitmap.font.size = 24


    @number.bitmap.font.bold = true


    @number.bitmap.font.color.set(0, 255, 255,200)


    @number.bitmap.draw_text(0, 0, 200, 32, "Ready",1)


    @number.x = 30


    @number.y = 100


  end


  #--------------------------------------------------------------------------


  # ● Pre Dispose


  #--------------------------------------------------------------------------


  def exit


    loop do


      Graphics.update


      @sprite.x += 5


      @layout.x -= 5


      @meter_sprite.x -= 5


      @text.x -= 2


      @text.opacity -= 5


      @sprite.opacity -= 5


      @layout.opacity -= 5


      @meter_sprite.opacity -= 5


      @number.opacity -= 5


      @back.opacity -= 5


      @cursor.visible = false


      break if @sprite.opacity == 0


    end


    SceneManager.call(Scene_Map)


  end


  #--------------------------------------------------------------------------


  # ● Dispose


  #--------------------------------------------------------------------------


  def dispose


    return if @layout == nil


    Graphics.freeze


    @background_sprite.bitmap.dispose


    @background_sprite.dispose


    @bitmap.dispose


    @sprite.bitmap.dispose


    @sprite.dispose


    @cursor.bitmap.dispose


    @cursor.dispose


    @meter_image.dispose


    @meter_bitmap.dispose


    @meter_sprite.bitmap.dispose


    @meter_sprite.dispose


    @layout.bitmap.dispose


    @layout.dispose


    @layout = nil


    @back.bitmap.dispose


    @back.dispose


    @text.bitmap.dispose


    @text.dispose


    @number.bitmap.dispose


    @number.dispose


    @image.dispose


  end


  #--------------------------------------------------------------------------


  # ● Update


  #--------------------------------------------------------------------------


  def update


    update_command


    update_cursor_slide


    update_flow


    update_change_time


  end


  #--------------------------------------------------------------------------


  # ● Change_Time


  #--------------------------------------------------------------------------


  def update_change_time


    return unless @auto


    @change_time += 1


    check_command(-1) if @change_time >= CHAIN_INPUT_DURATION - 1


  end


  #--------------------------------------------------------------------------


  # ● Update Flow


  #--------------------------------------------------------------------------


  def update_flow


    @timer -= 1


    @meter_sprite.bitmap.clear


    @meter_width = @meter_range * @timer / @timer_max


    @meter_src_rect = Rect.new(@meter_flow, 0, @meter_width, @meter_height)


    @meter_bitmap.blt(0,0, @meter_image, @meter_src_rect)


    @meter_flow += 20


    @meter_flow = 0 if @meter_flow >= @meter_image.width - @meter_range


    wrong_command if @timer == 0 and @auto == false


  end


  #--------------------------------------------------------------------------


  # ● Update Command


  #--------------------------------------------------------------------------


  def update_command


    return if @auto


    KEYS.each{|key,value| check_command(key) if Kboard.trigger?(value)}


  end


  #--------------------------------------------------------------------------


  # ● command_list_check


  #--------------------------------------------------------------------------


  def command_list_check(command)


    command.upcase!


    @com = ("A".."Z").to_a.index(command)


    @com ||= 26 + (_ = %w{SHIFT RIGHT LEFT DOWN UP}.index(command)) ? _ : 5


  end


  #--------------------------------------------------------------------------


  # ● check_command


  #--------------------------------------------------------------------------


  def check_command(com)


    index = 0


    if com != -1


      right_input = false


      for i in @chain_command


        if index == @com_index


          right_input = true if @chain_command[index] == com


        end


        index += 1


      end


    else


      @change_time = 0


      right_input = true


    end


    if right_input


      refresh_number


      next_command


    else


      wrong_command


    end


  end


  #--------------------------------------------------------------------------


  # ● Next Command


  #--------------------------------------------------------------------------


  def next_command


    @com_index += 1


    Audio.se_play("Audio/SE/" + CHAIN_RIGHT_SE, 100, 100)


    if @com_index == @chain_command.size


      $game_switches[@action_id] = true


      exit


      $game_map.need_refresh = true


    end


    refresh_command


    refresh_text(0)


  end


  #--------------------------------------------------------------------------


  # ● wrong_command


  #--------------------------------------------------------------------------


  def wrong_command


    Audio.se_play("Audio/SE/" + CHAIN_WRONG_SE, 100, 100)


    refresh_text(1)


    exit


    $game_player.jump(0,0)


  end


  #--------------------------------------------------------------------------


  # ● Refresh Command


  #--------------------------------------------------------------------------


  def refresh_command


    @sprite.bitmap.clear


    index = 0


    for i in @chain_command


      command_list_check(i)


      bitmap_src_rect = Rect.new(@com * @bitmap_cw, 0, @bitmap_cw, @bitmap_ch)


      if @com_index == index


        @bitmap.blt(index * (@bitmap_cw + 5) , 0, @image, bitmap_src_rect)


      else


        @bitmap.blt(index * (@bitmap_cw + 5) , @bitmap_ch,


        @image, bitmap_src_rect)


      end


      index += 1


    end


    if @chain_command.size > 15


      @new_x = (544 / 2) - ((@bitmap_cw + 5) * @com_index)


    else


      @cursor.x = (544 / 2) - @cursor_space + ((@bitmap_cw + 5) * @com_index)


    end


  end


  #--------------------------------------------------------------------------


  # ● Refresh Text


  #--------------------------------------------------------------------------


  def refresh_text(type)


    @text.bitmap.clear


    if type == 0


      if @com_index == @chain_command.size


        @text.bitmap.font.color.set(55, 255, 55,220)


        @text.bitmap.draw_text(0, 0, 200, 32, "Perfect!",1)


      else


        @text.bitmap.font.color.set(55, 155, 255,220)


        @text.bitmap.draw_text(0, 0, 200, 32, "Success!",1)


      end


    else


      @text.bitmap.font.color.set(255, 155, 55,220)


      if @timer == 0


        @text.bitmap.draw_text(0, 0, 200, 32, "Time Limit!",1)


      else


        @text.bitmap.draw_text(0, 0, 200, 32, "Fail!",1)


      end


    end


    @text.x = 230


    @text.opacity = 255


  end


  #--------------------------------------------------------------------------


  # ● Refresh Number


  #--------------------------------------------------------------------------


  def refresh_number


    @combo += 1


    @number.bitmap.clear


    @number.bitmap.font.size = 34


    @number.bitmap.draw_text(0, 0, 200, 32, @combo.to_s,1)


    @number.opacity = 255


    @number.zoom_x = 2


    @number.zoom_y = 2


  end


  #--------------------------------------------------------------------------


  # ● Update Cursor Slide


  #--------------------------------------------------------------------------


  def update_cursor_slide


    @sprite.zoom_x -= 0.1 if @sprite.zoom_x > 1


    @sprite.zoom_y -= 0.1 if @sprite.zoom_y > 1


    @text.x -= 2 if @text.x > 210


    @text.opacity -= 5 if @text.opacity > 0


    @sprite.x -= @slide_time if @sprite.x > @new_x and @chain_command.size > 15


    if @number.zoom_x > 1


      @number.zoom_x -= 0.1


      @number.zoom_y -= 0.1


    end


    if @fy_time > 15


      @fy += 1


    elsif @fy_time > 0


      @fy -= 1


    else


      @fy = 0


      @fy_time = 30


    end


    @fy_time -= 1


    @cursor.oy = @fy


  end


end


#==============================================================================


# ■ Game Temp


#==============================================================================


class Game_Temp


  attr_accessor :chain_switch_id


  #--------------------------------------------------------------------------


  # ● Initialize


  #--------------------------------------------------------------------------


  alias mog_chain_commands_initialize initialize


  def initialize


    @chain_switch_id = 0


    mog_chain_commands_initialize


  end


end


#==============================================================================


# ■ Game_Interpreter


#==============================================================================


class Game_Interpreter


  #--------------------------------------------------------------------------


  # ● Chain Commands


  #--------------------------------------------------------------------------


  def chain_commands(switch_id = 0)


    return if switch_id <= 0


    $game_temp.chain_switch_id = switch_id


    SceneManager.call(Chain_Commands)


    wait(1)


  end


end


#===============================================================================


# ■ SceneManager


#===============================================================================


class << SceneManager


  @background_bitmap2 = nil


  #--------------------------------------------------------------------------


  # ● Snapshot For Background2


  #--------------------------------------------------------------------------


  def snapshot_for_background2


    @background_bitmap2.dispose if @background_bitmap2


    @background_bitmap2 = Graphics.snap_to_bitmap


  end


  #--------------------------------------------------------------------------


  # ● Background Bitmap2


  #--------------------------------------------------------------------------


  def background_bitmap2


    @background_bitmap2


  end


end


#===============================================================================


# ■ Scene Map


#===============================================================================


class Scene_Map < Scene_Base


  #--------------------------------------------------------------------------


  # ● Terminate


  #--------------------------------------------------------------------------


  alias mog_chain_commands_terminate terminate


  def terminate


    SceneManager.snapshot_for_background2


    mog_chain_commands_terminate


  end


end


$mog_rgss3_chain_commands = true


#============================================================================


# ■ Keyboard Script


#----------------------------------------------------------------------------


#    By: 灼眼的夏娜


#  整理: 火灰


#----------------------------------------------------------------------------


# 本脚本来自 rm.66RPG.com，使用和转载请保留此信息


#==============================================================================


module Kboard


  module_function


  @R_Key_Hash = {}


  @R_Key_Repeat = {}


  GetKeyState = Win32API.new("user32","GetAsyncKeyState",['I'],'I')


  def press?(rkey)


    return GetKeyState.call(rkey) != 0


  end


  def repeat?(rkey)


    result = GetKeyState.call(rkey)


    if result != 0


      if @R_Key_Repeat[rkey].nil?


        @R_Key_Repeat[rkey] = 0


        return true


      end


      @R_Key_Repeat[rkey] += 1


    else


      @R_Key_Repeat[rkey] = nil


      @R_Key_Hash[rkey] = 0


    end


    if !@R_Key_Repeat[rkey].nil? and @R_Key_Repeat[rkey] > 4


      @R_Key_Repeat[rkey] = 0


      return true


    else


      return false


    end


  end


  def trigger?(rkey)


    result = GetKeyState.call(rkey)


    if @R_Key_Hash[rkey] == 1 and result != 0


      return false


    end


    if result != 0


      @R_Key_Hash[rkey] = 1


      return true


    else


      @R_Key_Hash[rkey] = 0


      return false


    end


  end


end

最后把这个图片代替你原来的Chain_Command.png 位于Graphics\System下

点评

余烬之中

ORZ 售后服务只有找VIPArcher了发表于 2014-8-20 22:35

余烬之中

好吧更新了不过应该体验不到问题删掉你原来的全键盘和连击键把这个插进去发表于 2014-8-20 22:34

Forever火

五星“星星星星星”好评。。。。发表于 2014-8-20 22:33

评分

参与人数 1	梦石 +5	收起理由
VIPArcher	+ 5	浴巾大美女的技术就是顶呱呱

查看全部评分

Forever火 发表于 2014-8-20 21:15:32

看看这个工程，明明脚本没问题。。

加了全键盘脚本的限时密码锁脚本，但是怎么我按第一下连第二个都错了？不明白的把工程拿去试试就知道

恐怖解谜游戏1.rar (5.06 MB, 下载次数: 34)

Forever火 发表于 2014-8-20 18:44:46

恐怖解谜游戏1.rar (5.06 MB, 下载次数: 29)
好不容易改好了又出了个神奇的问题，判定奇快TAT

点评

余烬之中

我做好了…… 发表于 2014-8-20 21:55

Forever火

表示无力了。。。发表于 2014-8-20 19:59

余烬之中 发表于 2014-8-20 17:56:27

噗那个下面when里面不应该是 "$R_Key_X"
而是"X"
这个东西与你上面CHAIN_SWITCH_COMMAND里填的是一致的

点评

Forever火

看楼下发表于 2014-8-20 18:45

Forever火

依然不行发表于 2014-8-20 18:41

评分

参与人数 1	星屑 +1	收起理由
VIPArcher	+ 1	噗噗噗

查看全部评分

Forever火 发表于 2014-8-20 16:13:30

我在贴了一个夏娜改的全键盘脚本后做了如下修改，还是不行呐。。。大大们指条明路好不好{:2_272:}
@余烬之中
if Kboard.press?($R_Key_X)
check_command(0)
when "$R_Key_X"
@Com = 5

余烬之中 发表于 2014-8-20 16:06:20

我的那个全键盘还在beta版不要用它

怎么改的话我给个提示

比如说你已经安装了某个全键盘脚本通过 Input.trigger?("G")可以判断玩家是否按下了G键

那么你就在update里加上
elsif Input.trigger?("G")
  check_command(13)

然后另一段
when "G"
  @Com = 13

然后为图片加上第十三个按钮：G

点评

Forever火

内个。。我用了夏娜的全键盘脚本但是不行。。。发表于 2014-8-20 17:43

Forever火 发表于 2014-8-20 15:34:43

@喵呜喵5 你说的是按键的图片吗？那个的话我可以用ps改改看

点评

VIPArcher

除了PS还得改一改脚本。如果懂脚本可以试试，否则，还是不玩这么复杂的东西吧=。= 大概在140行附近发表于 2014-8-20 16:17

Forever火 发表于 2014-8-20 15:24:46

本帖最后由 Forever火于 2014-8-20 15:26 编辑

@余烬之中虽然看不太懂，大概就是把键盘上的东西全给指定了一个位置，后面好像是判断按键还是啥，大概就是和系统说XX键在什么位置，如果我按了XX建就干嘛干嘛。。。然后我想说。。怎么调用？我想里面一定讲得很清楚了，不过我没有看懂而已{:2_272:}{:2_272:}

Forever火 发表于 2014-8-20 15:09:23

喵呜喵5 发表于 2014-8-20 14:56
因为dll中支持的按键只有那么几个，而RM默认判定玩家的按键是通过dll来的

比如，你在游戏进行过程中按F1 ...

我大概能猜到，应该是通过某种方法突破dl的限制l，后面应该就和原来的一样的

帐号		自动登录	找回密码
密码			注册会员

改密码锁脚本的小问题

正文摘要:

回复

点评

评分

看看这个工程，明明脚本没问题。。

点评

点评

评分

点评

点评