我问题真多，见谅各位

原来是小茄 · 发表于 2012-5-20 14:12:03

那个SHIFT脚本出缩地图的脚本怎么让它不一进游戏就自己出来，还有游戏里遇到战斗会卡

‘‘──原来是小茄于2012-5-20 14:30补充以下内容

求解答啊，谢谢各位大神了坐等
’’

Luciffer · 发表于 2012-5-20 18:31:27

还是那句话，开始游戏先自动执行，不过貌似需要用到一句调用脚本啊，由于不知道原脚本有木有提到，所以等楼下脚本帝来说吧。。。

end55rpg · 发表于 2012-5-20 18:47:24

请放出脚本来让我看呗

大东 · 发表于 2012-5-20 20:26:05

貌似得调开关，认真看使用说明了吗？

原来是小茄 · 发表于 2012-5-20 20:29:43

本帖最后由 hcm 于 2012-5-26 17:17 编辑

end55rpg 发表于 2012-5-20 18:47
请放出脚本来让我看呗

#==============================================================================
# 本脚本来自[url]www.66RPG.com[/url]，使用和转载请保留此信息
#==============================================================================
#==============================================================================
# ■ 縮小地图的表示(ver 0.999)
# by ピニョン clum-sea
#==============================================================================
#==============================================================================
# □ 前期定义
#==============================================================================
module PLAN_Map_Window
WIN_X = 8 # 地图的 X 座標
WIN_Y = 8 # 地图的 Y 座標
WIN_WIDTH = 8*32 # 地图的宽度
WIN_HEIGHT = 6*32 # 地图的高度
ZOOM = 4.0 # 地图的放缩比例
WINDOWSKIN = "" # 自定义地图窗口素材，如果留空则是默认的
ON_OFF_KEY = Input::A # 打开地图的按钮，A就是键盘的Z键
SWITCH = 100 # 禁用地图功能的开关，默认这个就是打开100号开关则禁止
# 使用地图功能，关闭则可以使用地图功能
WINDOW_MOVE = true # 窗口中的地图跟随移动，(true:跟随, false:固定)
OVER_X = 632 - WIN_WIDTH # 移動后的 X 座標(初期位置と往復します)
OVER_Y = 8 # 移動后的 Y 座標(初期位置と往復します)
OPACITY = 192 # 窗口的透明度
C_OPACITY = 192 # 地图的透明度
VISIBLE = true # 最初是否可见
end
#==============================================================================
# ■ Game_Temp
#==============================================================================
class Game_Temp
attr_accessor :map_visible # 地图的表示状態
alias plan_map_window_initialize initialize
def initialize
plan_map_window_initialize
@map_visible = true
end
end
#==============================================================================
# ■ Scene_Map
#==============================================================================
class Scene_Map
#--------------------------------------------------------------------------
# ● 主处理
#--------------------------------------------------------------------------
alias plan_map_window_main main
def main
@map_window = Window_Map.new
@map_window.visible = $game_temp.map_visible
plan_map_window_main
@map_window.dispose
end
#--------------------------------------------------------------------------
# ● 更新
#--------------------------------------------------------------------------
alias plan_map_window_update update
def update
$game_temp.map_visible = @map_window.visible
plan_map_window_update
unless $game_switches[PLAN_Map_Window::SWITCH]
if Input.trigger?(PLAN_Map_Window::ON_OFF_KEY)
if @map_window.visible
@map_window.visible = false
else
@map_window.visible = true
end
end
else
if @map_window.visible
@map_window.visible = false
end
end
if @map_window.visible
@map_window.update
end
end
#--------------------------------------------------------------------------
# ● 场所移动的变化
#--------------------------------------------------------------------------
alias plan_map_window_transfer_player transfer_player
def transfer_player
visible = @map_window.visible
@map_window.visible = false
plan_map_window_transfer_player
@map_window.dispose
@map_window = Window_Map.new
@map_window.visible = visible
end
end
#==============================================================================
# ■ Window_Map
#==============================================================================
class Window_Map < Window_Base
#--------------------------------------------------------------------------
# ● 初始化
#--------------------------------------------------------------------------
def initialize
x = PLAN_Map_Window::WIN_X
y = PLAN_Map_Window::WIN_Y
w = PLAN_Map_Window::WIN_WIDTH
h = PLAN_Map_Window::WIN_HEIGHT
super(x, y, w, h)
unless PLAN_Map_Window::WINDOWSKIN.empty?
self.windowskin = RPG::Cache.windowskin(PLAN_Map_Window::WINDOWSKIN)
end
self.contents = Bitmap.new(width - 32, height - 32)
self.opacity = PLAN_Map_Window::OPACITY
self.contents_opacity = PLAN_Map_Window::C_OPACITY
@map_data = $game_map.data
@tileset = RPG::Cache.tileset($game_map.tileset_name)
@autotiles = []
for i in 0..6
autotile_name = $game_map.autotile_names[i]
@autotiles[i] = RPG::Cache.autotile(autotile_name)
end
@old_real_x = $game_player.real_x
@old_real_y = $game_player.real_y
@all_map = make_all_map
self.visible = PLAN_Map_Window::VISIBLE
refresh
end
#--------------------------------------------------------------------------
# ● 缩小图做成
#--------------------------------------------------------------------------
def make_all_map
all_map = Bitmap.new($game_map.width * 32, $game_map.height * 32)
for y in 0...$game_map.height
for x in 0...$game_map.width
for z in 0...3
tile_num = @map_data[x, y, z]
next if tile_num == nil
if tile_num < 384
if tile_num >= 48
tile_num -= 48
src_rect = Rect.new(32, 2 * 32, 32, 32)
all_map.blt(x * 32, y * 32, @autotiles[tile_num / 48], src_rect)
end
else
tile_num -= 384
src_rect = Rect.new(tile_num % 8 * 32, tile_num / 8 * 32, 32, 32)
all_map.blt(x * 32, y * 32, @tileset, src_rect)
end
end
end
end
w = ($game_map.width / PLAN_Map_Window::ZOOM) * 32
h = ($game_map.height / PLAN_Map_Window::ZOOM) * 32
ret_bitmap = Bitmap.new(w, h)
src_rect = Rect.new(0, 0, all_map.width, all_map.height)
dest_rect = Rect.new(0, 0, ret_bitmap.width, ret_bitmap.height)
ret_bitmap.stretch_blt(dest_rect, all_map, src_rect)
all_map.dispose
return ret_bitmap
end
#--------------------------------------------------------------------------
# ● 刷新
#--------------------------------------------------------------------------
def refresh
self.contents.clear
one_tile_size = 32 / PLAN_Map_Window::ZOOM
x = $game_player.real_x - 128 * (self.contents.width / one_tile_size) / 2
y = $game_player.real_y - 128 * (self.contents.height / one_tile_size) / 2
x = x * one_tile_size / 128
y = y * one_tile_size / 128
half_width = self.contents.width * 128 / 2
rest_width = ($game_map.width * 128 - $game_player.real_x) * one_tile_size
rev_x = 0
if @all_map.width < self.contents.width
rev_x = (half_width - $game_player.real_x * one_tile_size) / 128
rev_x -= (self.contents.width - @all_map.width) / 2
x += rev_x
elsif half_width > $game_player.real_x * one_tile_size
rev_x = (half_width - $game_player.real_x * one_tile_size) / 128
x += rev_x
elsif half_width > rest_width
rev_x = -((half_width - rest_width) / 128)
x += rev_x
end
half_height = self.contents.height * 128 / 2
rest_height = ($game_map.height * 128 - $game_player.real_y) * one_tile_size
rev_y = 0
if @all_map.height < self.contents.height
rev_y = (half_height - $game_player.real_y * one_tile_size) / 128
rev_y -= (self.contents.height - @all_map.height) / 2
y += rev_y
elsif half_height > $game_player.real_y * one_tile_size
rev_y = (half_height - $game_player.real_y * one_tile_size) / 128
y += rev_y
elsif half_height > rest_height
rev_y = -((half_height - rest_height) / 128)
y += rev_y
end
src_rect = Rect.new(x, y, self.contents.width, self.contents.height)
self.contents.blt(0, 0, @all_map, src_rect)
if PLAN_Map_Window::WINDOW_MOVE == true
w = self.x..self.x + self.width
h = self.y..self.y + self.height
if w === $game_player.screen_x and h === $game_player.screen_y
if self.x == PLAN_Map_Window::WIN_X and self.y == PLAN_Map_Window::WIN_Y
self.x = PLAN_Map_Window::OVER_X
self.y = PLAN_Map_Window::OVER_Y
else
self.x = PLAN_Map_Window::WIN_X
self.y = PLAN_Map_Window::WIN_Y
end
end
end
if $game_party.actors.size > 0
for i in [2, 1, 0]
tile = @map_data[$game_player.x, $game_player.y, i]
next if tile == 0
return if $game_map.priorities[tile] > 0
end
actor = $game_party.actors[0]
bitmap = RPG::Cache.character(actor.character_name, actor.character_hue)
width = bitmap.width / 4
height = bitmap.height / 4
src_rect = Rect.new(0, 0, width, height)
w = width / PLAN_Map_Window::ZOOM
h = height / PLAN_Map_Window::ZOOM
x = self.contents.width / 2 - w / 2 + one_tile_size / 2 - rev_x
y = self.contents.height / 2 - h / 2 - rev_y
dest_rect = Rect.new(x, y, w, h)
self.contents.stretch_blt(dest_rect, bitmap, src_rect)
end
end
#--------------------------------------------------------------------------
# ● 更新
#--------------------------------------------------------------------------
def update
super
if @old_real_x != $game_player.real_x or @old_real_y != $game_player.real_y
@old_real_x = $game_player.real_x
@old_real_y = $game_player.real_y
refresh
end
end
#--------------------------------------------------------------------------
# ● 解放
#--------------------------------------------------------------------------
def dispose
super
@all_map.dispose
end
end
#==============================================================================
# 本脚本来自[url]www.66RPG.com[/url]，使用和转载请保留此信息
#==============================================================================

复制代码

小弟初学问题多，大神多担待，就是让它不要自己一开始就自动出来，还有那个遇到战斗场景很卡

原来是小茄 · 发表于 2012-5-20 20:34:47

大东发表于 2012-5-20 20:26
貌似得调开关，认真看使用说明了吗？

VISIBLE = true # 最初是否可见
是要调这个吗？不会求指教

‘‘──原来是小茄于2012-5-20 20:37补充以下内容

[@]大东[/@]
’’

‘‘──原来是小茄于2012-5-20 20:44补充以下内容

VISIBLE = true # 最初是否可见
是不是要调脚本里的这个啊？怎么调
’’

kangxi0109 · 发表于 2012-5-21 09:15:04

原来是小茄发表于 2012-5-20 20:34
VISIBLE = true # 最初是否可见
是要调这个吗？不会求指教

在脚本里直接将

VISIBLE = true # 最初是否可见

复制代码

改为

VISIBLE = false # 最初是否可见

复制代码

试试？

原来是小茄 · 发表于 2012-5-21 10:34:14

kangxi0109 发表于 2012-5-21 09:15
在脚本里直接将改为试试？

这个试过了不好用，还是一开始小地图就自己出来

kangxi0109 · 发表于 2012-5-21 10:53:21

原来是小茄发表于 2012-5-21 10:34
这个试过了不好用，还是一开始小地图就自己出来

那你就在进入游戏后的第一张地图里，设置一个并行事件，将100号开关打开（默认是关闭，关闭就会显示地图了），然后消除事件或用独立开关换掉事件页。然后在你需要显示的时候再关闭100号开关就可以了。

天使喝可乐 · 发表于 2012-5-21 11:52:42

脚本应该用[ code][ /code]标签内容放标签里否则论坛会自动把部分脚本内容转化为论坛功能
另外要描述清楚点问题战斗卡一类的要发范例工程多个问题分开多个帖子提问谢谢

帐号		自动登录	找回密码
密码			注册会员

[已经过期] 我问题真多，见谅各位

极短25评委

极短24评委

极短23评委

极短22评委

极短21评委

开拓者

极短25获奖

短篇七成年组季军